Commit graph

223,061 commits

Author SHA1 Message Date
David S. Miller
29fa060eab net: relax rtnl_dereference()
rtnl_dereference() is used in contexts where RTNL is held, to fetch an
RCU protected pointer.

Updates to this pointer are prevented by RTNL, so we dont need
smp_read_barrier_depends() and the ACCESS_ONCE() provided in
rcu_dereference_check().

rtnl_dereference() is mainly a macro to document the locking invariant.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 00:29:48 -07:00
David S. Miller
13f5bf18ba ipvs: Use frag walker helper in SCTP proto support.
Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Simon Horman <horms@verge.net.au>
2010-10-05 00:27:05 -07:00
Eric Dumazet
24824a09e3 net: dynamic ingress_queue allocation
ingress being not used very much, and net_device->ingress_queue being
quite a big object (128 or 256 bytes), use a dynamic allocation if
needed (tc qdisc add dev eth0 ingress ...)

dev_ingress_queue(dev) helper should be used only with RTNL taken.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05 00:23:44 -07:00
Takashi Iwai
45605a87b3 Merge branch 'for-2.6.37' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6 into topic/asoc 2010-10-05 07:50:11 +02:00
Sritej Velaga
0bd9e6a964 qlcnic: set mtu lower limit
Setting mtu < 68 is not supported.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:52 -07:00
Sritej Velaga
aef3d89827 qlcnic: cleanup port mode setting
Port mode setting is not required for Qlogic CNA adapters.

Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:51 -07:00
Sucheta Chakraborty
a1c0c45991 qlcnic: sparse warning fixes
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:51 -07:00
Sucheta Chakraborty
7e56cac4b6 qlcnic: fix vlan TSO on big endian machine
o desc->vlan_tci is in __le16 format. Doing htons and
  cpu_to_le64 again on vlan_tci, result in invalid value on ppc.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:50 -07:00
Sucheta Chakraborty
b501595cbb qlcnic: fix endianess for lro
ipaddress in ifa->ifa_address field are in big endian format.
Also device requires ip address in big endian only.

Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:50 -07:00
Amit Kumar Salecha
c265eb6ecb qlcnic: fix diag register
regs_buff[i] and diag_registers[j] array should use different index
variable.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:49 -07:00
Amit Kumar Salecha
ef1828058b qlcnic: fix eswitch stats
Some of the counters are not implemented in fw.
Fw return NOT AVAILABLE VALUE as (0xffffffffffffffff).
Adding these counters, result in invalid value.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:49 -07:00
Amit Kumar Salecha
31dee692e2 qlcnic: fix internal loopback test
o Loop 10 times with delay of 1 ms to rcv packet.
o Print garbage packet.
o Try send/receive MAX(16) packet, instead of exit from test,
  if a packet is not received.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-04 22:46:48 -07:00
Dmitry Torokhov
f6cd378372 Input: wacom - fix runtime PM related deadlock
When runtime PM is enabled by default for input devices, X hangs in
wacom open:
[<ffffffff814a00ea>] mutex_lock+0x1a/0x40
[<ffffffffa02bc94b>] wacom_resume+0x3b/0x90 [wacom]
[<ffffffff81327a32>] usb_resume_interface+0xd2/0x190
[<ffffffff81327b5d>] usb_resume_both+0x6d/0x110
[<ffffffff81327c24>] usb_runtime_resume+0x24/0x40
[<ffffffff8130a2cf>] __pm_runtime_resume+0x26f/0x450
[<ffffffff8130a23a>] __pm_runtime_resume+0x1da/0x450
[<ffffffff8130a53a>] pm_runtime_resume+0x2a/0x50
[<ffffffff81328176>] usb_autopm_get_interface+0x26/0x60
[<ffffffffa02bc626>] wacom_open+0x36/0x90 [wacom]

wacom_open() takes wacom->lock and calls usb_autopm_get_interface(),
which in turn calls wacom_resume() which tries to acquire the lock
again.

The fix is to call usb_autopm_get_interface() first, before we take
the lock.

Since we do not do usb_autopm_put_interface() until wacom_close()
is called runtime PM is effectively disabled for the driver, however
changing it now would risk regressions so the complete fix will
have to wait till the next merge window.

Reported-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-10-04 22:36:41 -07:00
Troy Kisky
94774b2849 ALSA: ASoc: DaVinci Delay start of ASP to trigger
Since only 4 mainline ASoC codecs support the trigger
callback, we cannot rely upon them stopping the frame clock
if they are master and must assume it is running even if the
sound is paused. Thus we cannot start the ASP until the trigger
method.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Martin Ambrose <martin@ti.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-10-04 17:55:17 -07:00
Ben Skeggs
d961db75ce drm/ttm: restructure to allow driver to plug in alternate memory manager
Nouveau will need this on GeForce 8 and up to account for the GPU
reordering physical VRAM for some memory types.

Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: Thomas Hellström <thellstrom@vmware.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 10:01:20 +10:00
Ben Skeggs
42311ff90d drm/ttm: introduce utility function to free an allocated memory node
Existing core code/drivers call drm_mm_put_block on ttm_mem_reg.mm_node
directly.  Future patches will modify TTM behaviour in such a way that
ttm_mem_reg.mm_node doesn't necessarily belong to drm_mm.

Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Acked-by: Thomas Hellström <thellstrom@vmware.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 10:00:34 +10:00
Roy Spliet
a845fff841 drm/nouveau: fix thinkos in mem timing table recordlen check
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:59:43 +10:00
Ben Skeggs
ca8e7c6ccd drm/nouveau: parse voltage from perf 0x40 entires
This was disabled previously because of some uncertainty that +2 was
indeed the voltage.  It appears it is, checked on a NVA8 and a NVA3M.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:59:39 +10:00
Emil Velikov
eadc69cc90 drm/nouveau: don't use the default pll limits in table v2.1 on nv50+ cards
This fixes issues bug 30370 and prevents another possible divide by zero on
the original nv50 cards, by returning -ENOENT

Signed-off-by: Emil Velikov <eeydev@nottingham.ac.uk>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:59:34 +10:00
Francisco Jerez
8af29ccd79 drm/nv50: Fix large 3D performance regression caused by the interchannel sync patches.
Reported-by: Christoph Bumiller <e0425955@student.tuwien.ac.at>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Tested-by: Maarten Maathuis <madman2003@gmail.com>
Tested-by: Xavier Chantry <chantry.xavier@gmail.com>
Tested-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:59:28 +10:00
Francisco Jerez
6479881752 drm/nouveau: Synchronize buffer object moves in hardware.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:59:22 +10:00
Francisco Jerez
0c6c1c2fb8 drm/nouveau: Use semaphores to handle inter-channel sync in hardware.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:59:16 +10:00
Francisco Jerez
8ac3891b48 drm/nouveau: Provide a means to have arbitrary work run on fence completion.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:59:12 +10:00
Francisco Jerez
2730723bbc drm/nouveau: Minor refactoring/cleanup of the fence code.
Mainly to make room for inter-channel sync.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:58:59 +10:00
Marcin Kościelnicki
0cba1b7644 drm/nouveau: Add a module option to force card POST.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:58:52 +10:00
Ben Skeggs
62841ab726 drm/nv50: prevent (IB_PUT == IB_GET) for occurring unless idle
Should fix a DMA race condition I've never seen myself, but could be
the culprit in some random hangs that have been reported.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:58:47 +10:00
Francisco Jerez
cd2fb2e9e0 drm/nv0x-nv4x: Leave the 0x40 bit untouched when changing CRE_LCD.
It's an unrelated PLL filtering control bit, leave it alone when
changing the CRTC-encoder binding.

Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:58:43 +10:00
Francisco Jerez
23357e4da0 drm/nv30-nv40: Fix postdivider mask when writing engine/memory PLLs.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:58:33 +10:00
Francisco Jerez
2756a4f5df drm/nouveau: Fix perf table parsing on BMP v5.25.
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:58:29 +10:00
Ben Skeggs
62acdc71cf drm/nouveau: fix required mode bandwidth calculation for DP
This should fix eDP on certain laptops with 18-bit panels, we were rejecting
the panel's native mode due to thinking there was insufficient bandwidth
for it.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:58:03 +10:00
Tony Lindgren
63509e3c03 omap: Keep nwires for omap1 and 2420 MMC controller
A patch from Sukumar Ghorai <s-ghorai@ti.com> changed the
nwires to use caps instead. However, nwires is still
needed for the earlier controller.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Sukumar Ghorai <s-ghorai@ti.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
2010-10-04 16:58:01 -07:00
Ben Skeggs
85341f27b4 drm/nouveau: fix typo in c2aa91afea5f7e7ae4530fabd37414a79c03328c
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:57:58 +10:00
Ben Skeggs
fade7ad56d drm/nva3: split pm backend out from nv50
This will end up quite different, it makes sense for it to be completely
separate.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:57:54 +10:00
Ben Skeggs
aee582de80 drm/nouveau: run perflvl and M table scripts on mem clock change
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:57:49 +10:00
Ben Skeggs
5c6dc65754 drm/nouveau: pass perflvl struct to clock_pre()
On certain boards, there's BIOS scripts and memory timings that need to
be modified with the memclk.  Just pass in the entire perflvl struct and
let the chipset-specific code decide what to do.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:57:41 +10:00
Ben Skeggs
fe224bb7e1 drm/nouveau: enable enhanced framing only if DP display supports it
Reported-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:57:35 +10:00
Roy Spliet
7760fcb020 drm/nouveau: Import initial memory timing work
This isn't correct everywhere yet, but since we don't use the data yet
it's perfectly safe to push in, and the information we gain from logs
will help to fix the remaining issues.

v2 (Ben Skeggs <bskeggs@redhat.com>):
- fixed up formatting
- free parsed timing info on takedown
- switched timing table printout to debug loglevel

Signed-off-by: Roy Spliet <r.spliet@student.tudelft.nl>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-10-05 09:57:32 +10:00
Gustavo F. Padovan
eaa71b318c Bluetooth: Disallow to change L2CAP_OPTIONS values when connected
L2CAP doesn't permit change like MTU, FCS, TxWindow values while the
connection is alive, we can only set that before the
connection/configuration process. That can lead to bugs in the L2CAP
operation.

Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2010-10-04 19:28:52 -03:00
Patrick McHardy
eecc545856 netfilter: add missing xt_log.h file
Forgot to add xt_log.h in commit a8defca0 (netfilter: ipt_LOG:
add bufferisation to call printk() once)

Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-04 23:24:21 +02:00
Russell King
a9fda02bfc Merge branch 'for_rmk' of git://git.linaro.org/kernel/linux-linaro-next into devel-stable 2010-10-04 22:23:30 +01:00
Linus Torvalds
2f6b3aa7a5 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
  regulator: max8649 - fix setting extclk_freq
  regulator: fix typo in current units
  regulator: fix device_register() error handling
2010-10-04 13:35:48 -07:00
Changli Gao
f68c53015c netfilter: unregister nf hooks, matches and targets in the reverse order
Since we register nf hooks, matches and targets in order, we'd better
unregister them in the reverse order.

Signed-off-by: Changli Gao <xiaosuo@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
2010-10-04 22:24:12 +02:00
Will Deacon
c4e259c859 ARM: 6386/1: flush_ptrace_access: invalidate correct I-cache alias
copy_to_user_page can be used by access_process_vm to write to an
executable page of a process using a mapping acquired by kmap.
For systems with I-cache aliasing, flushing the I-cache using the
Kernel mapping may leave stale data in the I-cache if the user
mapping is of a different colour.

This patch introduces a flush_icache_alias function to flush.c,
which calls flush_icache_range with a mapping of the specified
colour. flush_ptrace_access is then modified to call this new
function instead of coherent_kern_range in the case of an aliasing
I-cache and a non-aliasing D-cache.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04 20:57:10 +01:00
Will Deacon
8925ec4c53 ARM: 6385/1: setup: detect aliasing I-cache when D-cache is non-aliasing
Currently, the Kernel assumes that if a CPU has a non-aliasing D-cache
then the I-cache is also non-aliasing. This may not be true on ARM cores
from v6 onwards, which may have aliasing I-caches but non-aliasing
D-caches.

This patch adds a cpu_has_aliasing_icache function, which is called from
cacheid_init and adds CACHEID_VIPT_I_ALIASING to the cacheid when
appropriate. A utility macro, icache_is_vipt_aliasing(), is also
provided.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04 20:57:09 +01:00
Linus Walleij
100642c7b6 ARM: 6366/1: Update U300 defconfig
This mainly removes a lot of unused subsystems (as for the mainline
drivers) in the U300 defconfig, switch of MMC debugging by default
and enables debugfs on the builds. Once we merge the drivers we'll
configure it on again.

Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04 20:53:32 +01:00
Jarkko Nikula
a09f73fabb omap: devices: Avoid merge conflict between ASoC and OMAP hwmod changes
Upcoming ASoC multi-component and OMAP hwmod changes will conflict
in arch/arm/mach-omap2/devices.c. Avoid this by moving a little bit
include statement introduced by ASoC Multi-Component Support patch.

Signed-off-by: Jarkko Nikula <jhnikula@gmail.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-04 20:48:36 +01:00
Paul Mundt
c1e30ad98f sh: intc: Support virtual mappings for IRQ subgroups.
Many interrupts that share a single mask source but are on different
hardware vectors will have an associated register tied to an INTEVT that
denotes the precise cause for the interrupt exception being triggered.

This introduces the concept of IRQ subgroups in the intc core, where
a virtual IRQ map is constructed for each of the pre-defined cause bits,
and a higher level chained handler takes control of the parent INTEVT.
This enables CPUs with heavily muxed IRQ vectors (especially across
disjoint blocks) to break things out in to a series of managed chained
handlers while being able to dynamically lookup and adopt the IRQs
created for them.

This is largely an opt-in interface, requiring CPUs to manually submit
IRQs for subgroup splitting, in addition to providing identifiers in
their enum maps that can be used for lazy lookup via the radix tree.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-10-05 04:47:03 +09:00
Maxim Osipov
8ed9059533 ARM: 6393/1: AT91: Add flexibity board support
This patch adds support for Flexibity Connect platform from
http://www.flexibity.com/ (AT91SAM9260 based).

Signed-off-by: Maxim Osipov <maxim.osipov@gmail.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Andrew Victor <linux@maxim.org.za>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04 20:41:37 +01:00
Tony Lindgren
81d11955bf ARM: 6405/1: Handle __flush_icache_all for CONFIG_SMP_ON_UP
Do this by adding flush_icache_all to cache_fns for ARMv6 and 7.
As flush_icache_all may neeed to be called from flush_kern_cache_all,
add it as the first entry in the cache_fns.

Note that now we can remove the ARM_ERRATA_411920 dependency
to !SMP so it can be selected on UP ARMv6 processors, such
as omap2.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Anand Gadiyar <gadiyar@ti.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04 20:23:36 +01:00
Tony Lindgren
f9e417e901 ARM: 6402/1: Don't send IPI in smp_send_stop if there's only one CPU
No need to send IPI if there's one CPU, especially when booting
systems with CONFIG_SMP_ON_UP that may not even support IPI.

Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-10-04 20:23:36 +01:00