Commit graph

752,023 commits

Author SHA1 Message Date
Kalderon, Michal
e3fd112cbf RDMA/qedr: Fix kernel panic when running fio over NFSoRDMA
Race in qedr_poll_cq, lastest_cqe wasn't protected by lock,
leading to a case where two context's accessing poll_cq at
the same time lead to one of them having a pointer to an old
latest_cqe and reading an invalid cqe element

Signed-off-by: Amit Radzi <Amit.Radzi@cavium.com>
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 19:57:37 -07:00
Kalderon, Michal
ea0ed47803 RDMA/qedr: Fix iWARP connect with port mapper
Fix iWARP connect and listen to use the mapped port for
ipv4 and ipv6. Without this fixed, running on a server
that has iwpmd enabled will not use the correct port

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 19:57:37 -07:00
Kalderon, Michal
11052696fd RDMA/qedr: Fix ipv6 destination address resolution
The wrong parameter was passed to dst_neigh_lookup

Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 19:57:37 -07:00
James Smart
4c06619fc4 scsi: lpfc: use __raw_writeX on DPP copies
Commit 1351e69fc6 ("scsi: lpfc: Add push-to-adapter support to sli4")
fails compilation on some 32-bit systems as writeq() is not supported on
all architectures. Additionally, it was pointed out that as writeX()
does byteswapping if necessary for pci vs the cpu endianness, the code
was broken on BE PPC.

After discussions with Arnd Bergmann, we've resolved the issue
to the following:
  Instead of writeX(), use __raw_writeX() - which writes to io
    space while preserving byte order. To use this, the code
    was changed to use a different buffer that lpfc prepped
    via sli_pcimem_bcopy() that was set to the bytestream to
    be written.
  On platforms with __raw_writeq support, use the routine, otherwise
    use __raw_writel()

[mkp: checkpatch]

Fixes: 1351e69fc6 ("scsi: lpfc: Add push-to-adapter support to sli4")
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-06 21:25:39 -05:00
Andrzej Hajda
1421717321 dt-bindings: add bindings for Samsung micro-USB 11-pin connector
Samsung micro-USB 11-pin connector beside standard micro-USB pins,
has pins dedicated to route MHL traffic.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-03-07 11:24:00 +09:00
Andrzej Hajda
593aa2b405 dt-bindings: add bindings for USB physical connector
These bindings allow to describe most known standard USB connectors
and it should be possible to extend it if necessary.
USB connectors, beside USB can be used to route other protocols,
for example UART, Audio, MHL. In such case every device passing data
through the connector should have appropriate graph bindings.

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2018-03-07 11:22:46 +09:00
Jianchao Wang
2f793a27d5 scsi: core: use blk_mq_requeue_request in __scsi_queue_insert
In scsi core, __scsi_queue_insert should just put request back on the
queue and retry using the same command as before. However, for blk-mq,
scsi_mq_requeue_cmd is employed here which will unprepare the
request. To align with the semantics of __scsi_queue_insert, use
blk_mq_requeue_request with kick_requeue_list == true and put the
reference of scsi_device.

Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-06 21:16:33 -05:00
Souptick Joarder
61b142afb2 scsi: megaraid: Use dma_pool_zalloc()
Use dma_pool_zalloc() instead of dma_pool_alloc + memset

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Acked-by: Sumit Saxena <sumit.saxena@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-06 21:14:01 -05:00
Dan Carpenter
532ed9264d ipmi: missing error code in try_smi_init()
If platform_device_alloc() then we should return -ENOMEM instead of
returning success.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-03-06 19:47:52 -06:00
Colin Ian King
e8824babad ipmi: use ARRAY_SIZE for poweroff_functions array sizing calculation
Use the ARRAY_SIZE macro on a array poweroff_functions to determine
size of the array. Improvement suggested by Coccinelle.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-03-06 19:47:51 -06:00
Corey Minyard
71404a2f75 ipmi: Consolidate cleanup code
The cleanup code for an init failure and for a device removal were
quite similar, consolidate all that into one function.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-03-06 19:47:50 -06:00
Corey Minyard
da18e2c6a8 ipmi: Remove some unnecessary initializations
The data is allocated with kzalloc, no need to set things to NULL.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-03-06 19:47:49 -06:00
Corey Minyard
cc095f0ac1 ipmi: Fix some error cleanup issues
device_remove_group() was called on any cleanup, even if the
device attrs had not been added yet.  That can occur in certain
error scenarios, so add a flag to know if it has been added.

Also make sure we remove the dev if we added it ourselves.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org # 4.15
Cc: Laura Abbott <labbott@redhat.com>
Tested-by: Bill Perkins <wmp@grnwood.net>
2018-03-06 19:47:17 -06:00
Mike Snitzer
c934edadcc dm table: allow upgrade from bio-based to specialized bio-based variant
In practice this is really only meaningful in the context of the DM
multipath target (which uses dm_table_set_type() to set the type of
device DM should create via its "queue_mode" option).

So this change allows a DM multipath device with "queue_mode bio" to be
upgraded from DM_TYPE_BIO_BASED to DM_TYPE_NVME_BIO_BASED -- iff the
underlying device(s) are NVMe.

DM_TYPE_NVME_BIO_BASED is just a DM core implementation detail that
allows for NVMe-specific optimizations (e.g. use direct_make_request
instead of generic_make_request).  If in the future there is no benefit
or need to distinguish NVMe vs not: then it will be removed.

Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-06 20:23:58 -05:00
Mike Snitzer
8d47e65948 dm mpath: remove unnecessary NVMe branching in favor of scsi_dh checks
This eliminates the "queue_mode" configuration's "nvme" mode.  There
wasn't anything NVMe-specific about that mode.  It was named "nvme"
because it was a short name for the mode.  But the entire point of the
mode was to optimize the multipath target for underlying devices that
are _not_ SCSI-based.  Devices that aren't SCSI have no need for the
various SCSI device handler (scsi_dh) specific code in DM multipath.

But rather than narrowly define this scsi_dh vs not branching in terms
of "nvme": invert the logic so that we're just checking whether a
multipath device is layered on SCSI devices with scsi_dh attached.

This allows any future storage technology to avoid scsi_dh specific code
in the multipath target too.

Fixes: 848b8aefd4 ("dm mpath: optimize NVMe bio-based support")
Suggested-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-06 20:23:58 -05:00
Mikulas Patocka
99243b922c dm table: fix "nvme" test
The strncmp function should compare 4 bytes.

Fixes: 22c11858e8 ("dm: introduce DM_TYPE_NVME_BIO_BASED")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-06 20:23:58 -05:00
Jonathan Brassow
da1e148803 dm raid: fix incorrect sync_ratio when degraded
Upstream commit 4102d9de6d ("dm raid: fix rs_get_progress()
synchronization state/ratio") in combination with commit 7c29744ecc
("dm raid: simplify rs_get_progress()") introduced a regression by
incorrectly reporting a sync_ratio of 0 for degraded raid sets.  This
caused lvm2 to fail to repair raid legs automatically.

Fix by identifying the degraded state by checking the MD_RECOVERY_INTR
flag and returning mddev->recovery_cp in case it is set.

MD sets recovery = [ MD_RECOVERY_RECOVER MD_RECOVERY_INTR
MD_RECOVERY_NEEDED ] when a RAID member fails.  It then shuts down any
sync thread that is running and leaves us with all MD_RECOVERY_* flags
cleared.  The bug occurs if a status is requested in the short time it
takes to shut down any sync thread and clear the flags, because we were
keying in on the MD_RECOVERY_NEEDED - understanding it to be the initial
phase of a “recover” sync thread.  However, this is an incorrect
interpretation if MD_RECOVERY_INTR is also set.

This also explains why the bug only happened when automatic repair was
enabled and not a normal ‘manual’ method.  It is impossible to react
quick enough to hit the problematic window without it being automated.

Fix passes automatic repair tests.

Fixes: 7c29744ecc ("dm raid: simplify rs_get_progress()")
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-06 20:23:57 -05:00
Mike Snitzer
519049afea dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl
Otherwise an underlying device's teardown (e.g. SCSI) may race with the
DM ioctl or persistent reservation and result in dereferencing driver
memory that gets freed when the underlying device's final blkdev_put()
occurs.

bdgrab() only increases the refcount for the block_device's inode to
ensure the block_device struct itself will not be freed, but does not
guarantee the block_device will remain associated with the gendisk or
its storage.

Cc: stable@vger.kernel.org # 4.8+
Reported-by: David Jeffery <djeffery@redhat.com>
Suggested-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Ben Marzinski <bmarzins@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-06 20:23:57 -05:00
Arnd Bergmann
590347e400 dm bufio: avoid false-positive Wmaybe-uninitialized warning
gcc-6.3 and earlier show a new warning after a seemingly unrelated
change to the arm64 PAGE_KERNEL definition:

In file included from drivers/md/dm-bufio.c:14:0:
drivers/md/dm-bufio.c: In function 'alloc_buffer':
include/linux/sched/mm.h:182:56: warning: 'noio_flag' may be used uninitialized in this function [-Wmaybe-uninitialized]
  current->flags = (current->flags & ~PF_MEMALLOC_NOIO) | flags;
                                                        ^

The same warning happened earlier on linux-3.18 for MIPS and I did a
workaround for that, but now it's come back.

gcc-7 and newer are apparently smart enough to figure this out, and
other architectures don't show it, so the best I could come up with is
to rework the caller slightly in a way that makes it obvious enough to
all arm64 compilers what is happening here.

Fixes: 41acec6240 ("arm64: kpti: Make use of nG dependent on arm64_kernel_unmapped_at_el0()")
Link: https://patchwork.kernel.org/patch/9692829/
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[snitzer: moved declarations inside conditional, altered vmalloc return]
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-06 20:23:57 -05:00
Kevin Barnett
b0f9408b14 scsi: smartpqi: add in new supported controllers
Reviewed-by: Scott Benesh <scott.benesh@microsemi.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microsemi.com>
Signed-off-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2018-03-06 20:15:17 -05:00
Jonas Rabenstein
d15e1175a9 block: sed-opal: fix response string extraction
Tokens are prefixed by a variable length of bytes. If a bytestring is
not stored in an tiny or short atom, we have to skip more than one byte
in order to have the actual bytes not prefixed by the bytes describing
the actual length of the string.

Acked-by: Jonathan Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-06 17:55:46 -07:00
Kees Cook
555974068e pstore: Avoid size casts for 842 compression
Instead of casting, make sure we don't end up with giant values and just
perform regular assignments with unsigned int instead of re-cast size_t.

Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-06 15:15:24 -08:00
Geliang Tang
239b716199 pstore: Add lz4hc and 842 compression support
Currently, pstore has supported three compression algorithms: zlib,
lzo and lz4. This patch added two more compression algorithms: lz4hc
and 842.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
[kees: tweaked Kconfig help text slightly]
Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-06 15:06:11 -08:00
Gustavo A. R. Silva
63231585a6 RDMA/bnxt_re/qplib_sp: Use true and false for boolean values
Assign true or false to boolean variables instead of an integer value.

This issue was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 16:00:51 -07:00
Sergey Gorenko
fbd36818ee IB/srp: Use the IB_DEVICE_SG_GAPS_REG HCA feature if supported
If a HCA supports the SG_GAPS_REG feature then fewer memory regions
are required per command. This patch reduces the number of memory
regions that is allocated per SRP session.

Signed-off-by: Sergey Gorenko <sergeygo@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Tested-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Acked-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 16:00:51 -07:00
Bart Van Assche
4190443947 IB/hfi1: Add a missing rcu_read_unlock()
This patch avoids that sparse reports the following:

drivers/infiniband/hw/hfi1/driver.c:251:13: warning: context imbalance in 'rcv_hdrerr' - different lock contexts for basic block

Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 16:00:51 -07:00
Arushi
666fe24bbe infiniband: hw: Drop unnecessary continue
Continue at the bottom of a loop are removed.
Issue found using drop_continue.cocci Coccinelle script.

Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 16:00:51 -07:00
Shiraz Saleem
7e952b19eb i40iw: Implement get_vector_affinity API
Storage ULPs (like NVMEoF) benefit from exposing affinity mapping
per completion vector to find the optimal multi-queue affinity
assignments. The ULPs call the verbs API ib_get_vector_affinity
introduced in commit c66cd353bb ("RDMA/core: expose affinity mappings per
completion vector") to get the underlying devices affinity mappings.

Add support in driver to expose the affinity masks per MSI-X
completion vector.

Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 16:00:51 -07:00
Shiraz Saleem
7de8b3576a i40iw: Improve CM node lookup time on connection setup
Currently all CM nodes involved in a connection are
maintained in a connected_node list per dev. During
connection setup, we need to search this every time
we receive a packet on the iWARP LAN Queue (ILQ) and
this can be pretty inefficient for large number of
connections.

Fix this by organizing the CM nodes in two lists -
accelerated list and non-accelerated list. The search
on ILQ receive would be limited to only non accelerated
nodes. When a node moves to RTS, it is added to the
accelerated list.

Benchmarking ucmatose 16k connections shows a 20%
improvement in test completion time.

Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 16:00:51 -07:00
Mustafa Ismail
6b0c549fc6 i40iw: Refactor handling of txpend list
Currently the TX pending lists for IEQ and ILQ are
handled separately. The handling of both can be
consolidated in i40iw_poll_completion.

Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 16:00:51 -07:00
Bart Van Assche
2a78cb4db4 IB/srpt: Fix an out-of-bounds stack access in srpt_zerolength_write()
Avoid triggering an out-of-bounds stack access by changing the type
of 'wr' from ib_send_wr into ib_rdma_wr.

This patch fixes the following KASAN bug report:

BUG: KASAN: stack-out-of-bounds in rxe_post_send+0x7a9/0x9a0 [rdma_rxe]
Read of size 8 at addr ffff880068197a48 by task kworker/2:1/44

Workqueue: ib_cm cm_work_handler [ib_cm]
Call Trace:
 dump_stack+0x8e/0xcd
 print_address_description+0x6f/0x280
 kasan_report+0x25a/0x380
 __asan_load8+0x54/0x90
 rxe_post_send+0x7a9/0x9a0 [rdma_rxe]
 srpt_zerolength_write+0xf0/0x180 [ib_srpt]
 srpt_cm_rtu_recv+0x68/0x110 [ib_srpt]
 srpt_rdma_cm_handler+0xbb/0x15b [ib_srpt]
 cma_ib_handler+0x1aa/0x4a0 [rdma_cm]
 cm_process_work+0x30/0x100 [ib_cm]
 cm_work_handler+0xa86/0x351b [ib_cm]
 process_one_work+0x475/0x9f0
 worker_thread+0x69/0x690
 kthread+0x1ad/0x1d0
 ret_from_fork+0x3a/0x50

Fixes: aaf45bd83e ("IB/srpt: Detect session shutdown reliably")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 16:00:51 -07:00
Bart Van Assche
a6544a624c RDMA/rxe: Fix an out-of-bounds read
This patch avoids that KASAN reports the following when the SRP initiator
calls srp_post_send():

==================================================================
BUG: KASAN: stack-out-of-bounds in rxe_post_send+0x5c4/0x980 [rdma_rxe]
Read of size 8 at addr ffff880066606e30 by task 02-mq/1074

CPU: 2 PID: 1074 Comm: 02-mq Not tainted 4.16.0-rc3-dbg+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0x85/0xc7
print_address_description+0x65/0x270
kasan_report+0x231/0x350
rxe_post_send+0x5c4/0x980 [rdma_rxe]
srp_post_send.isra.16+0x149/0x190 [ib_srp]
srp_queuecommand+0x94d/0x1670 [ib_srp]
scsi_dispatch_cmd+0x1c2/0x550 [scsi_mod]
scsi_queue_rq+0x843/0xa70 [scsi_mod]
blk_mq_dispatch_rq_list+0x143/0xac0
blk_mq_do_dispatch_ctx+0x1c5/0x260
blk_mq_sched_dispatch_requests+0x2bf/0x2f0
__blk_mq_run_hw_queue+0xdb/0x160
__blk_mq_delay_run_hw_queue+0xba/0x100
blk_mq_run_hw_queue+0xf2/0x190
blk_mq_sched_insert_request+0x163/0x2f0
blk_execute_rq+0xb0/0x130
scsi_execute+0x14e/0x260 [scsi_mod]
scsi_probe_and_add_lun+0x366/0x13d0 [scsi_mod]
__scsi_scan_target+0x18a/0x810 [scsi_mod]
scsi_scan_target+0x11e/0x130 [scsi_mod]
srp_create_target+0x1522/0x19e0 [ib_srp]
kernfs_fop_write+0x180/0x210
__vfs_write+0xb1/0x2e0
vfs_write+0xf6/0x250
SyS_write+0x99/0x110
do_syscall_64+0xee/0x2b0
entry_SYSCALL_64_after_hwframe+0x42/0xb7

The buggy address belongs to the page:
page:ffffea0001998180 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x4000000000000000()
raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff
raw: dead000000000100 dead000000000200 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff880066606d00: 00 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1
ffff880066606d80: f1 00 f2 f2 f2 f2 f2 f2 f2 00 00 f2 f2 f2 f2 f2
>ffff880066606e00: f2 00 00 00 00 00 f2 f2 f2 f3 f3 f3 f3 00 00 00
                                    ^
ffff880066606e80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880066606f00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

Fixes: 8700e3e7c4 ("Soft RoCE driver")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Moni Shoua <monis@mellanox.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 16:00:51 -07:00
Bart Van Assche
a1ae7d0345 RDMA/core: Avoid that ib_drain_qp() triggers an out-of-bounds stack access
This patch fixes the following KASAN complaint:

==================================================================
BUG: KASAN: stack-out-of-bounds in rxe_post_send+0x77d/0x9b0 [rdma_rxe]
Read of size 8 at addr ffff880061aef860 by task 01/1080

CPU: 2 PID: 1080 Comm: 01 Not tainted 4.16.0-rc3-dbg+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014
Call Trace:
dump_stack+0x85/0xc7
print_address_description+0x65/0x270
kasan_report+0x231/0x350
rxe_post_send+0x77d/0x9b0 [rdma_rxe]
__ib_drain_sq+0x1ad/0x250 [ib_core]
ib_drain_qp+0x9/0x30 [ib_core]
srp_destroy_qp+0x51/0x70 [ib_srp]
srp_free_ch_ib+0xfc/0x380 [ib_srp]
srp_create_target+0x1071/0x19e0 [ib_srp]
kernfs_fop_write+0x180/0x210
__vfs_write+0xb1/0x2e0
vfs_write+0xf6/0x250
SyS_write+0x99/0x110
do_syscall_64+0xee/0x2b0
entry_SYSCALL_64_after_hwframe+0x42/0xb7

The buggy address belongs to the page:
page:ffffea000186bbc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x4000000000000000()
raw: 4000000000000000 0000000000000000 0000000000000000 00000000ffffffff
raw: 0000000000000000 ffffea000186bbe0 0000000000000000 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff880061aef700: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff880061aef780: 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00
>ffff880061aef800: f2 f2 f2 f2 f2 f2 f2 00 00 00 00 00 f2 f2 f2 f2
                                                      ^
ffff880061aef880: f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 f2 f2
ffff880061aef900: f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================

Fixes: 765d67748b ("IB: new common API for draining queues")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Steve Wise <swise@opengridcomputing.com>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: stable@vger.kernel.org
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 16:00:51 -07:00
Colin Ian King
042932f7a3 infiniband: remove redundant assignment to pointer 'rdi'
The pointer rdi is being initialized with a value that is never read
and re-assigned immediately after, hence the initialization is redundant
and can be removed.

Cleans up clang warning:
drivers/infiniband/sw/rdmavt/vt.c:94:23: warning: Value stored to 'rdi'
during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-03-06 16:00:51 -07:00
Ville Syrjälä
edb2e5301c drm/i915: Track whether the DP link is trained or not
LSPCON likes to throw short HPDs during the enable seqeunce prior to the
link being trained. These obviously result in the channel CR/EQ check
failing and thus we schedule a pointless hotplug work to retrain the
link. Avoid that by ignoring the bad CR/EQ status until we've actually
initially trained the link.

I've not actually investigated to see what LSPCON is trying to signal
with the short pulse. But as long as it signals anything I think we're
supposed to check the link status anyway, so I don't really see other
good ways to solve this. I've not seen these short pulses being
generated by normal DP sinks.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117192149.17760-5-ville.syrjala@linux.intel.com
2018-03-06 17:59:08 -05:00
Ville Syrjälä
2fed7955bf drm/i915: Nuke intel_dp->channel_eq_status
intel_dp->channel_eq_status is used in exactly one function, and we
don't need it to persist between calls. So just go back to using a
local variable instead.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117192149.17760-4-ville.syrjala@linux.intel.com
2018-03-06 17:58:55 -05:00
Ville Syrjälä
c85d200e83 drm/i915: Move SST DP link retraining into the ->post_hotplug() hook
Doing link retraining from the short pulse handler is problematic since
that might introduce deadlocks with MST sideband processing. Currently
we don't retrain MST links from this code, but we want to change that.
So better to move the entire thing to the hotplug work. We can utilize
the new encoder->hotplug() hook for this.

The only thing we leave in the short pulse handler is the link status
check. That one still depends on the link parameters stored under
intel_dp, so no locking around that but races should be mostly harmless
as the actual retraining code will recheck the link state if we
end up there by mistake.

v2: Rebase due to ->post_hotplug() now being just ->hotplug()
    Check the connector type to figure out if we should do
    the HDMI thing or the DP think for DDI

[pushed with whitespace changes for sparse]
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117192149.17760-3-ville.syrjala@linux.intel.com
2018-03-06 17:57:44 -05:00
Ville Syrjälä
dba14b27dd drm/i915: Reinitialize sink scrambling/TMDS clock ratio on HPD
The LG 4k TV I have doesn't deassert HPD when I turn the TV off, but
when I turn it back on it will pulse the HPD line. By that time it has
forgotten everything we told it about scrambling and the clock ratio.
Hence if we want to get a picture out if it again we have to tell it
whether we're currently sending scrambled data or not. Implement
that via the encoder->hotplug() hook.

v2: Force a full modeset to not follow the HDMI 2.0 spec more
    closely (Shashank)

[pushed with whitespace fixes to make sparse happy]
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117192149.17760-1-ville.syrjala@linux.intel.com
2018-03-06 17:57:24 -05:00
Ville Syrjälä
1b2cb026dc drm/i915: Convert intel_hpd_irq_event() into an encoder hotplug hook
Allow encoders to customize their hotplug processing by moving the
intel_hpd_irq_event() code into an encoder hotplug vfunc. Currently
only SDVO needs this to re-enable hotplug signalling in the SDVO
chip. We'll use this same hook for DP/HDMI link management later.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180117192149.17760-1-ville.syrjala@linux.intel.com
2018-03-06 17:56:29 -05:00
Rodrigo Vivi
470e7c6189 drm/i915/cnp: Document WaSouthDisplayDisablePWMCGEGating
No functional change since WA is already applied.
But since it has different names on different databases,
let's document it here to avoid future confusion.

Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180306012812.19779-1-rodrigo.vivi@intel.com
2018-03-06 14:41:27 -08:00
Rodrigo Vivi
14941b6e86 drm/i915/cnl: document WaVFUnitClockGatingDisable
No functional change. WA is already properly applied.
but in different databases it has different names.
Let's document all of them to avoid future confusion.

Cc: Rafael Antognolli <rafael.antognolli@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rafael Antognolli <rafael.antognolli@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180306012000.18928-1-rodrigo.vivi@intel.com
2018-03-06 14:41:26 -08:00
Dhinakaran Pandiyan
c90c275c6f drm/i915/psr: Update PSR2 resolution check for Cannonlake
In fact, apply the Cannonlake resolution check for all >= Gen-10 platforms
to be safe.

v3: Update GLK too. (Ville)
    Longer variable names.
    if-else in place of ternary operator.
v2: Use local variables for resolution limits and print them (Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Elio Martinez Monroy <elio.martinez.monroy@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180306203355.29292-1-dhinakaran.pandiyan@intel.com
2018-03-06 14:35:45 -08:00
Stephen Smalley
6b4f3d0105 usb, signal, security: only pass the cred, not the secid, to kill_pid_info_as_cred and security_task_kill
commit d178bc3a70 ("user namespace: usb:
 make usb urbs user namespace aware (v2)") changed kill_pid_info_as_uid
to kill_pid_info_as_cred, saving and passing a cred structure instead of
uids.  Since the secid can be obtained from the cred, drop the secid fields
from the usb_dev_state and async structures, and drop the secid argument to
kill_pid_info_as_cred.  Replace the secid argument to security_task_kill
with the cred.  Update SELinux, Smack, and AppArmor to use the cred, which
avoids the need for Smack and AppArmor to use a secid at all in this hook.
Further changes to Smack might still be required to take full advantage of
this change, since it should now be possible to perform capability
checking based on the supplied cred.  The changes to Smack and AppArmor
have only been compile-tested.

Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Acked-by: Paul Moore <paul@paul-moore.com>
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: James Morris <james.morris@microsoft.com>
2018-03-07 09:05:53 +11:00
Jiri Benc
20d5de51e7 tools: bpftool: fix compilation with older headers
Compilation of bpftool on a distro that lacks eBPF support in the installed
kernel headers fails with:

common.c: In function ‘is_bpffs’:
common.c:96:40: error: ‘BPF_FS_MAGIC’ undeclared (first use in this function)
  return (unsigned long)st_fs.f_type == BPF_FS_MAGIC;
                                        ^
Fix this the same way it is already in tools/lib/bpf/libbpf.c and
tools/lib/api/fs/fs.c.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-06 22:51:00 +01:00
David Ahern
2cbb4ea7de net: Only honor ifindex in IP_PKTINFO if non-0
Only allow ifindex from IP_PKTINFO to override SO_BINDTODEVICE settings
if the index is actually set in the message.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-06 16:36:44 -05:00
Linus Torvalds
86f84779d8 Merge branch 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull sigingo fix from Eric Biederman:
 "The kbuild test robot found that I accidentally moved si_pkey when I
  was cleaning up siginfo_t. A short followed by an int with the int
  having 8 byte alignment. Sheesh siginfo_t is a weird structure.

  I have now corrected it and added build time checks that with a little
  luck will catch any similar future mistakes. The build time checks
  were sufficient for me to verify the bug and to verify my fix. So they
  are at least useful this once."

* 'siginfo-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal/x86: Include the field offsets in the build time checks
  signal: Correct the offset of si_pkey in struct siginfo
2018-03-06 12:41:30 -08:00
Tony Lindgren
740c01f76a ARM: multi_v7_defconfig: Enable USB gadget configfs as loadable module
With USB OTG now enabled, it makes sense to allow configuring the
USB gadgets via configfs.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-06 11:25:37 -08:00
Tony Lindgren
153d751ba6 ARM: multi_v7_defconfig: Enable various USB PHYs found on omap variants
With MUSB USB OTG controller enabled, let's now enable the USB PHYs
found on omap varian SoCs.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-06 11:25:37 -08:00
Tony Lindgren
4df8974b41 ARM: multi_v7_defconfig: Enable OTG and MUSB as loadable modules
We can support USB OTG with MUSB driver on many ARM SoCs. Let's
enable all the SoCs with MUSB as loadable modules. And let's enable
their related DMA hardware.

And as MUSB is an USB OTG controller, let's enable OTG support too.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-06 11:25:37 -08:00
Tony Lindgren
077e1cde78 ARM: omap2plus_defconfig: Enable 8250_OMAP
We've had 8250_OMAP working for few years now, so let's start enabling
it by default. We provide users an option to warn by default with
SERIAL_8250_OMAP_TTYO_FIXUP by default. That option updates the serial
console to point to 8250 driver and warns about it.

Users with ttyO[0123] in their /etc/inittab should update inittab
to use ttyS[0123] instead.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-06 11:25:37 -08:00