Pull networking fixes from David Miller:
1) Use an appropriate TSQ pacing shift in mac80211, from Toke
Høiland-Jørgensen.
2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk
in ip6_route_me_harder, from Eric Dumazet.
3) Fix several shutdown races and similar other problems in l2tp, from
James Chapman.
4) Handle missing XDP flush properly in tuntap, for real this time.
From Jason Wang.
5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel
Borkmann.
6) Fix phy_resume() locking, from Andrew Lunn.
7) IFLA_MTU values are ignored on newlink for some tunnel types, fix
from Xin Long.
8) Revert F-RTO middle box workarounds, they only handle one dimension
of the problem. From Yuchung Cheng.
9) Fix socket refcounting in RDS, from Ka-Cheong Poon.
10) Don't allow ppp unit registration to an unregistered channel, from
Guillaume Nault.
11) Various hv_netvsc fixes from Stephen Hemminger.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits)
hv_netvsc: propagate rx filters to VF
hv_netvsc: filter multicast/broadcast
hv_netvsc: defer queue selection to VF
hv_netvsc: use napi_schedule_irqoff
hv_netvsc: fix race in napi poll when rescheduling
hv_netvsc: cancel subchannel setup before halting device
hv_netvsc: fix error unwind handling if vmbus_open fails
hv_netvsc: only wake transmit queue if link is up
hv_netvsc: avoid retry on send during shutdown
virtio-net: re enable XDP_REDIRECT for mergeable buffer
ppp: prevent unregistered channels from connecting to PPP units
tc-testing: skbmod: fix match value of ethertype
mlxsw: spectrum_switchdev: Check success of FDB add operation
net: make skb_gso_*_seglen functions private
net: xfrm: use skb_gso_validate_network_len() to check gso sizes
net: sched: tbf: handle GSO_BY_FRAGS case in enqueue
net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len
rds: Incorrect reference counting in TCP socket creation
net: ethtool: don't ignore return from driver get_fecparam method
vrf: check forwarding on the original netdevice when generating ICMP dest unreachable
...
Since commit 9b947a13e7 ("regmap: use debugfs even when no device")
allows the usage of regmap debugfs even when there is no device
associated, which causes several warnings like this:
(NULL device *): Failed to create debugfs directory
This happens when the debugfs file name is 'dummy'.
The first dummy debugfs creation works fine, but subsequent creations
fail as they have all the same name.
Disambiguate the 'dummy' debugfs file name by adding a suffix entry,
so that the names become dummy0, dummy1, dummy2, etc.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The of_count_phandle_with_args() can fail and return error(for example,
rk3399 pd_vio doesn't have clocks). That would break the pd probe.
Add a sanity check on pd->num_clks to avoid that.
Fixes: 65084121d59d ("soc: rockchip: power-domain: use clk_bulk APIs")
Reported-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Tested-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Use clk_bulk APIs, and also add error handling for clk enable.
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Disable IO function switching between sdmmc and jtag
for RK3128 SoCs.
Signed-off-by: Xiao Yao <xiaoyao@rock-chips.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Use drm_mode_get_hv_timing() to fill out the plane clip rectangle.
Since armada isn't atomic we'll use crtc->enabled and crtc->mode instead
of the stuff under crtc_state.
Once everyone agrees on how the clip rectangle gets set up we can
move the code into drm_atomic_helper_check_plane_state().
Cc: Dave Airlie <airlied@redhat.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-4-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
As armada isn't an atomic driver trying to pass a non-populated
crtc->state to drm_atomic_helper_check_plane_state() will end in tears.
Construct a temporary crtc state a la drm_plane_helper_check_update()
and pass that instead. For now we just really need crtc_state->enable
to be there.
Cc: Dave Airlie <airlied@redhat.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-3-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Dave Airlie <airlied@redhat.com>
The util mkregtable includes a copy of the kernel API for linked lists,
only a small subset of it is used. Delete the unused functions and macros.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rather than querying it every time we need it.
Also fixes a crash in VM pass through if there is no
root bridge because the cached value fetch already checks
this properly.
v2: fix includes
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=105244
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Rex Zhu<rezhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The IN_FORMATS blob allows the kernel to advertise to userspace which
format/modifier combinations are supported, per plane. Use this to
advertise that we support both T_TILED and linear.
v2:
- Only advertise T_TILED for RGB (Eric)
- Actually turn on allow_fb_modifiers (Eric)
Signed-off-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/170828/
When autoneg is off, the .check_for_link callback functions clear the
get_link_status flag and systematically return a "pseudo-error". This means
that the link is not detected as up until the next execution of the
e1000_watchdog_task() 2 seconds later.
Fixes: 19110cfbb3 ("e1000e: Separate signaling for link check/link up")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The proper name for the property, which assign given device to IOMMU is
'iommus', not 'iommu'. Fix incorrect name and let all GScaler devices
to be properly handled when IOMMU support is enabled.
Reported-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 6cbfdd73a9 ("ARM: dts: add sysmmu nodes for exynos5250")
Cc: <stable@vger.kernel.org> # v4.8+
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The bypass-smu property is neither used nor documented in bindings.
Remove it from Xyref5260 board DTS.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
The 82574 specification update errata 12 states that interrupts may be
missed if ICR is read while INT_ASSERTED is not set. Avoid that problem by
setting all bits related to events that can trigger the Other interrupt in
IMS.
The Other interrupt is raised for such events regardless of whether or not
they are set in IMS. However, only when they are set is the INT_ASSERTED
bit also set in ICR.
By doing this, we ensure that INT_ASSERTED is always set when we read ICR
in e1000_msix_other() and steer clear of the errata. This also ensures that
ICR will automatically be cleared on read, therefore we no longer need to
clear bits explicitly.
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Restores the ICS write for Rx/Tx queue interrupts which was present before
commit 16ecba59bc ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1)
but was not restored in commit 4aea7a5c5e
("e1000e: Avoid receiver overrun interrupt bursts", v4.15-rc1).
This re-raises the queue interrupts in case the txq or rxq bits were set in
ICR and the Other interrupt handler read and cleared ICR before the queue
interrupt was raised.
Fixes: 4aea7a5c5e ("e1000e: Avoid receiver overrun interrupt bursts")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This partially reverts commit 4aea7a5c5e.
We keep the fix for the first part of the problem (1) described in the log
of that commit, that is to read ICR in the other interrupt handler. We
remove the fix for the second part of the problem (2), Other interrupt
throttling.
Bursts of "Other" interrupts may once again occur during rxo (receive
overflow) traffic conditions. This is deemed acceptable in the interest of
avoiding unforeseen fallout from changes that are not strictly necessary.
As discussed, the e1000e driver should be in "maintenance mode".
Link: https://www.spinics.net/lists/netdev/msg480675.html
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Acked-by: Alexander Duyck <alexander.h.duyck@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Antoine Tenart says:
====================
net: mvpp2: jumbo frames support
This series enable jumbo frames support in the Marvell PPv2 driver. The
first 2 patches rework the buffer management, then two patches prepare for
the final patch which adds the jumbo frames support into the driver.
This is based on top of net-next, and was tested on a mcbin.
Thanks!
Antoine
Since v1:
- Improved the Tx FIFO initialization comment.
- Improved the pool sanity check in mvpp2_bm_pool_use().
- Fixed pool related comments.
- Cosmetic fixes (used BIT() whenever possible).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the support for jumbo frames in the Marvell PPv2 driver.
A third buffer pool is added with 10KB buffers, which is used if the MTU
is higher than 1518B for packets larger than 1518B. Please note only the
port 0 supports hardware checksum offload due to the Tx FIFO size
limitation.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
[Antoine: cosmetic cleanup, commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the NETIF_F_IPV6_CSUM to the driver's features to enable
UDP/TCP checksum over IPv6. No extra configuration of the engine is
needed on top of the IPv4 counterpart, which already is in the features
list (NETIF_F_IP_CSUM).
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch sets the Tx FIFO data size on port 0 to 10kB. This prepares
the PPv2 driver for the Jumbo frame support addition as the hardware
will need big enough Tx FIFO buffers when dealing with frames going
through an interface with an MTU of 9000.
Signed-off-by: Yan Markman <ymarkman@marvell.com>
[Antoine: commit message, small reworks.]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The buffer free routine is updated to release only given a number of
buffers, and the destroy routine now checks the actual number of buffers
in the (BPPI and BPPE) HW counters before draining the pools. This
change helps getting jumbo frames support.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
[Antoine: cosmetic cleanup, commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch configures the buffer manager long pool for all ports part of
the same CP. Long pool separation between ports is redundant since there
are no performance improvement when different pools are used.
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
[Antoine: cosmetic cleanup, commit message]
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes the following kernel-doc warning:
./include/net/dst.h:366: warning: Function parameter or member 'net' not described in 'skb_tunnel_rx'
Fixes: ea23192e8e ("tunnels: harmonize cleanup done on skb on rx path")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The other dst_cache_{get,set}_ip{4,6} functions, and the doc comment for
dst_cache_set_ip6 use 'saddr' for their source address parameter. Rename
the parameter to increase consistency.
This fixes the following kernel-doc warnings:
./include/net/dst_cache.h:58: warning: Function parameter or member 'addr' not described in 'dst_cache_set_ip6'
./include/net/dst_cache.h:58: warning: Excess function parameter 'saddr' description in 'dst_cache_set_ip6'
Fixes: 911362c70d ("net: add dst_cache support")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was reported that emulated e1000e devices in vmware esxi 6.5 Build
7526125 do not link up after commit 4aea7a5c5e ("e1000e: Avoid receiver
overrun interrupt bursts", v4.15-rc1). Some tracing shows that after
e1000e_trigger_lsc() is called, ICR reads out as 0x0 in e1000_msix_other()
on emulated e1000e devices. In comparison, on real e1000e 82574 hardware,
icr=0x80000004 (_INT_ASSERTED | _LSC) in the same situation.
Some experimentation showed that this flaw in vmware e1000e emulation can
be worked around by not setting Other in EIAC. This is how it was before
16ecba59bc ("e1000e: Do not read ICR in Other interrupt", v4.5-rc1).
Fixes: 4aea7a5c5e ("e1000e: Avoid receiver overrun interrupt bursts")
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
'HWTSTAMP_TX_ON' should be handled as a value, not as a bit mask.
The modified code should behave the same, because HWTSTAMP_TX_ON is 1
and no other possible values of 'tx_type' would match the test.
However, this is more future-proof, should other values be allowed one day.
See 'struct hwtstamp_config' in 'include/uapi/linux/net_tstamp.h'
This fixes a warning reported by smatch:
igb_xmit_frame_ring() warn: bit shifter 'HWTSTAMP_TX_ON' used for logical '&'
Fixes: 26bd4e2db0 ("igb: protect TX timestamping from API misuse")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When the driver notices that PCIe link is gone by reading 0xffffffff
from a register it clears hw->hw_addr and then calls netif_device_detach().
This happens when the PCIe device is physically unplugged for example
the user disconnected the Thunderbolt cable.
However, netif_device_detach() prevents netif_unregister() from bringing
the device down properly including tearing down MSI-X vectors. This
triggers following crash during the driver removal:
igb 0000:0b:00.0 enp11s0f0: PCIe link lost, device now detached
------------[ cut here ]------------
kernel BUG at drivers/pci/msi.c:352!
invalid opcode: 0000 [#1] PREEMPT SMP PTI
...
Call Trace:
pci_disable_msix+0xc9/0xf0
igb_reset_interrupt_capability+0x58/0x60 [igb]
igb_remove+0x90/0x100 [igb]
pci_device_remove+0x31/0xa0
device_release_driver_internal+0x152/0x210
pci_stop_bus_device+0x78/0xa0
pci_stop_bus_device+0x38/0xa0
pci_stop_bus_device+0x38/0xa0
pci_stop_bus_device+0x26/0xa0
pci_stop_bus_device+0x38/0xa0
pci_stop_and_remove_bus_device+0x9/0x20
trim_stale_devices+0xee/0x130
? _raw_spin_unlock_irqrestore+0xf/0x30
trim_stale_devices+0x8f/0x130
? _raw_spin_unlock_irqrestore+0xf/0x30
trim_stale_devices+0xa1/0x130
? get_slot_status+0x8b/0xc0
acpiphp_check_bridge.part.7+0xf9/0x140
acpiphp_hotplug_notify+0x170/0x1f0
...
To prevent the crash do not call netif_device_detach() in igb_rd32().
This should be fine because hw->hw_addr is set to NULL preventing future
hardware access of the now missing device.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=198181
Reported-by: Ferenc Boldog <ferenc.boldog@gmail.com>
Reported-by: Nikolay Bogoychev <nheart@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
* Add a per-VF value to know if a VF is trusted, by default don't
trust VFs.
* Implement netdev op to trust VFs (igb_ndo_set_vf_trust) and add
trust status to ndo_get_vf_config output.
* Allow a trusted VF to change MAC and MAC filters even if MAC
has been administratively set.
Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Now that arch/metag/ has been removed, remove the METAG dependency from
the IMG SCB I2C device driver. The hardware is also present on MIPS SoCs
so the driver still has value.
Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Cc: linux-i2c@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Now that arch/metag/ has been removed, remove the METAG dependency from
the IMG IR device driver. The hardware is also present on MIPS SoCs so
the driver still has value.
Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: Sean Young <sean@mess.org>
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: linux-media@vger.kernel.org
Cc: linux-metag@vger.kernel.org
Now that arch/metag/ has been removed, remove the METAG dependency from
the IMG IR device driver. The hardware is also present on MIPS SoCs so
the driver still has value.
Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-metag@vger.kernel.org
The core Meta architecture support has now been removed, so drop the
MAINTAINERS entry and add an entry to CREDITS.
Signed-off-by: James Hogan <jhogan@kernel.org>
Cc: linux-metag@vger.kernel.org
Now that arch/metag/ has been removed, remove the metag DA TTY and
console driver. It is of no value without the architecture code.
Signed-off-by: James Hogan <jhogan@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: linux-metag@vger.kernel.org
All the devices on I2C0 support fast mode, so increase the bus speed
to match. The Armada 388 is known to have a timing issue when in
standard mode, which we believe causes the ficticious device at 0x64
to appear.
[gregory.clement@bootlin.com: Note that since the commit fbffee7498
("ARM: dts: Fix I2C repeated start issue on Armada-38x") in 4.14, the
timing issue is managed for the Armada 38x SoCs.]
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Kirill Tkhai says:
====================
Converting pernet_operations (part #4)
this series continues to review and to convert pernet_operations
to make them possible to be executed in parallel for several
net namespaces in the same time. The patches touch mostly netfilter,
also there are small number of changes in other places.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations register and unregister sysctl.
nf_conntrack_l4proto_gre4->init_net is simple memory
initializer. Also, exit method removes gre keymap_list,
which is per-net. This looks safe to be executed
in parallel with other pernet_operations.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations register and unregister
two conntrack notifiers, and they seem to be safe
to be executed in parallel.
General/not related to async pernet_operations JFI:
ctnetlink_net_exit_batch() actions are grouped in batch,
and this could look like there is synchronize_rcu()
is forgotten. But there is synchronize_rcu() on module
exit patch (in ctnetlink_exit()), so this batch may
be reworked as simple .exit method.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations register and unregister sysctl and /proc
entries. Exit batch method also waits till all per-net conntracks
are dead. Thus, they are safe to be marked as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations initialize and destroy
net_generic(net, ip_set_net_id)-related data.
Since ip_set is under CONFIG_IP_SET, it's easy
to watch drivers, which depend on this config.
All of them are in net/netfilter/ipset directory,
except of net/netfilter/xt_set.c. There are no
more drivers, which use ip_set, and all of
the above don't register another pernet_operations.
Also, there are is no indirect users, as header
file include/linux/netfilter/ipset/ip_set.h does
not define indirect users by something like this:
#ifdef CONFIG_IP_SET
extern func(void);
#else
static inline func(void);
#endif
So, there are no more pernet operations, dereferencing
net_generic(net, ip_set_net_id).
ip_set_net_ops are OK to be executed in parallel
for several net, so we mark them as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations initialize and destroy
pernet net_generic(net, fou_net_id) list.
The rest of net_generic(net, fou_net_id) accesses
may happen after netlink message, and in-tree
pernet_operations do not send FOU_GENL_NAME messages.
So, these pernet_operations are safe to be marked
as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations looks similar to dccp_v4_ops,
and they are also safe to be marked as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations create and destroy net::dccp::v4_ctl_sk.
It looks like another pernet_operations don't want to send
dccp packets to dying or creating net. Batch method similar
to ipv4/ipv6 sockets and it has to be safe to be executed
in parallel with anything else. So, we mark them as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations have a deal with cgw_list,
and the rest of accesses are made under rtnl_lock().
The only exception is cgw_dump_jobs(), which is
accessed under rcu_read_lock(). cgw_dump_jobs() is
called on netlink request, and it does not seem,
foreign pernet_operations want to send a net such
the messages. So, we mark them as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Init method just allocates memory for new cfg, and
assigns net_generic(net, caif_net_id). Despite there is
synchronize_rcu() on error path in cfcnfg_create(),
in real this function does not use global lists,
so it looks like this synchronize_rcu() is some legacy
inheritance. Exit method removes caif devices under
rtnl_lock().
There could be a problem, if someone from foreign net
pernet_operations dereference caif_net_id of this net.
It's dereferenced in get_cfcnfg() and caif_device_list().
get_cfcnfg() is used from netdevice notifiers, where
they are called under rtnl_lock(). The notifiers can't
be called from foreign nets pernet_operations. Also,
it's used from caif_disconnect_client() and from
caif_connect_client(). The both of the functions work
with caif socket, and there is the only possibility
to have a socket, when the net is dead. This may happen
only of the socket was created as kern using sk_alloc().
Grep by PF_CAIF shows we do not create kern caif sockets,
so get_cfcnfg() is safe.
caif_device_list() is used in netdevice notifiers and exit
method under rtnl lock. Also, from caif_get() used in
the netdev notifiers and in caif_flow_cb(). The last item
is skb destructor. Since there are no kernel caif sockets
nobody can send net a packet in parallel with init/exit,
so this is also safe.
So, these pernet_operations are safe to be async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations call xt_proto_init() and xt_proto_fini(),
which just register and unregister /proc entries.
They are safe to be marked as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These pernet_operations use nf_log_set() and nf_log_unset()
in their methods:
nf_log_bridge_net_ops
nf_log_arp_net_ops
nf_log_ipv4_net_ops
nf_log_ipv6_net_ops
nf_log_netdev_net_ops
Nobody can send such a packet to a net before it's became
registered, nobody can send a packet after all netdevices
are unregistered. So, these pernet_operations are able
to be marked as async.
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>