Commit graph

752,023 commits

Author SHA1 Message Date
Tal Gilboa
33523a3613 net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth
Use the new pci_bandwidth_available() function to calculate maximum
available bandwidth through the PCI chain instead of computing it ourselves
with mlx5e_get_pci_bw().

This is used to detect when the device is capable of more bandwidth than is
available in the current slot.  The driver may adjust compression settings
accordingly.

Note that pci_bandwidth_available() accounts for PCIe encoding overhead, so
it is more accurate than mlx5e_get_pci_bw() was.

Signed-off-by: Tal Gilboa <talgi@mellanox.com>
[bhelgaas: remove mlx5e_get_pci_bw() wrapper altogether]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2018-04-03 08:58:33 -05:00
Tal Gilboa
00c6bcb0d6 net/mlx5: Report PCIe link properties with pcie_print_link_status()
Use pcie_print_link_status() to report PCIe link speed and possible
limitations.

Signed-off-by: Tal Gilboa <talgi@mellanox.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2018-04-03 08:58:32 -05:00
Tal Gilboa
190b509c8d net/mlx4_core: Report PCIe link properties with pcie_print_link_status()
Use pcie_print_link_status() to report PCIe link speed and possible
limitations instead of implementing this in the driver itself.

Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
[bhelgaas: changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-04-03 08:58:31 -05:00
Tal Gilboa
9e506a7b51 PCI: Add pcie_print_link_status() to log link speed and whether it's limited
Add pcie_print_link_status().  This logs the current settings of the link
(speed, width, and total available bandwidth).

If the device is capable of more bandwidth but is limited by a slower
upstream link, we include information about the link that limits the
device's performance.

The user may be able to move the device to a different slot for better
performance.

This provides a unified method for all PCI devices to report status and
issues, instead of each device reporting in a different way, using
different code.

Signed-off-by: Tal Gilboa <talgi@mellanox.com>
[bhelgaas: changelog, reword log messages, print device capabilities when
not limited, print bandwidth in Gb/s]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-04-03 08:58:30 -05:00
Tal Gilboa
6db79a88c6 PCI: Add pcie_bandwidth_available() to compute bandwidth available to device
Add pcie_bandwidth_available() to compute the bandwidth available to a
device.  This may be limited by the device itself or by a slower upstream
link leading to the device.

The available bandwidth at each link along the path is computed as:

  link_width * link_speed * (1 - encoding_overhead)

2.5 and 5.0 GT/s links use 8b/10b encoding, which reduces the raw bandwidth
available by 20%; 8.0 GT/s and faster links use 128b/130b encoding, which
reduces it by about 1.5%.

The result is in Mb/s, i.e., megabits/second, of raw bandwidth.

Also return the device with the slowest link and the speed and width of
that link.

Signed-off-by: Tal Gilboa <talgi@mellanox.com>
[bhelgaas: changelog, leave pcie_get_minimum_link() alone for now, return
bw directly, use pci_upstream_bridge(), check "next_bw <= bw" to find
uppermost limiting device, return speed/width of the limiting device]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-04-03 08:58:29 -05:00
Lucas Stach
d9a22d713a i2c: imx: avoid taking clk_prepare mutex in PM callbacks
This is unsafe, as the runtime PM callbacks are called from the PM
workqueue, so this may deadlock when handling an i2c attached clock,
which may already hold the clk_prepare mutex from another context.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-03 15:29:28 +02:00
Lucas Stach
90ad2cbe88 i2c: imx: use clk notifier for rate changes
Instead of repeatedly calling clk_get_rate for each transfer, register
a clock notifier to update the cached divider value each time the clock
rate actually changes.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2018-04-03 15:28:53 +02:00
Arnaldo Carvalho de Melo
ef9ff6017e perf ui browser: Move the extra title lines from the hists browser
This will be useful for the annotate browser as well, that wants to have
extra title lines, i.e. the current ui_browser unconditionally reserves
the first line for a browser title and the last one for status messages.

But some browsers, like the buckets one (hists browser) needs extra
lines to show headers, allowing it to be shown or not, press 'H' in
'perf top' or 'perf report' to see this feature.

So move that logic to the core ui_browser used by the hists_browser
('perf top' and 'perf report' main interface) so that it can be used by
the annotate browser too.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935
Link: https://lkml.kernel.org/n/tip-r38xm3ut37ulbg1o5tn5iise@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-03 10:24:26 -03:00
Arnaldo Carvalho de Melo
25c312dbf8 perf hists: Move hists__scnprintf_title() away from the TUI code
The previous patch made this function useful to non-TUI parts of the
tools, but left it where the function from what it was carved, so that
the patch showed more clearly the process.

Now just move it outside the TUI parts so that we can finally use it,
even when the TUI code doesn't get built/linked.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935
Link: https://lkml.kernel.org/n/tip-hqj7hvcr3mu5lvcqp3cssio6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-03 10:23:32 -03:00
Arnaldo Carvalho de Melo
967a464a7e perf hists: Introduce hists__scnprint_title()
That is not use any struct hists_browser internals, so that it can be
shared with the other UIs and tools.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935
Link: https://lkml.kernel.org/n/tip-w8mczjnqnbcj9yzfkv9ja6ro@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-03 10:23:18 -03:00
Arnaldo Carvalho de Melo
f016d24acd perf hists browser: Rename perf_evsel_browser_title to a more descriptive name
Rename it to hists_browser__scnprintf_title() to better reflect that it
provides a scnprintf-like function operating on a hists_browser
instance.

This paves the way to have a non-hists_browser specific function to
scnprintf format a title with per evsel information to use in other
tools or UIs.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196935
Link: https://lkml.kernel.org/n/tip-sntpyzxsnme9jvuz2qntwoh2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-04-03 10:22:42 -03:00
Nicholas Piggin
f2748bdfe1 powerpc/powernv: Always stop secondaries before reboot/shutdown
Currently powernv reboot and shutdown requests just leave secondaries
to do their own things. This is undesirable because they can trigger
any number of watchdogs while waiting for reboot, but also we don't
know what else they might be doing -- they might be causing trouble,
trampling memory, etc.

The opal scheduled flash update code already ran into watchdog problems
due to flashing taking a long time, and it was fixed with 2196c6f1ed
("powerpc/powernv: Return secondary CPUs to firmware before FW update"),
which returns secondaries to opal. It's been found that regular reboots
can take over 10 seconds, which can result in the hard lockup watchdog
firing,

  reboot: Restarting system
  [  360.038896709,5] OPAL: Reboot request...
  Watchdog CPU:0 Hard LOCKUP
  Watchdog CPU:44 detected Hard LOCKUP other CPUS:16
  Watchdog CPU:16 Hard LOCKUP
  watchdog: BUG: soft lockup - CPU#16 stuck for 3s! [swapper/16:0]

This patch removes the special case for flash update, and calls
smp_send_stop in all cases before calling reboot/shutdown.

smp_send_stop could return CPUs to OPAL, the main reason not to is
that the request could come from a NMI that interrupts OPAL code,
so re-entry to OPAL can cause a number of problems. Putting
secondaries into simple spin loops improves the chances of a
successful reboot.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by:  Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-03 22:59:57 +10:00
Nicholas Piggin
855bfe0de1 powerpc: hard disable irqs in smp_send_stop loop
The hard lockup watchdog can fire under local_irq_disable
on platforms with irq soft masking.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-03 22:59:10 +10:00
Nicholas Piggin
6bed323762 powerpc: use NMI IPI for smp_send_stop
Use the NMI IPI rather than smp_call_function for smp_send_stop.
Have stopped CPUs hard disable interrupts rather than just soft
disable.

This function is used in crash/panic/shutdown paths to bring other
CPUs down as quickly and reliably as possible, and minimizing their
potential to cause trouble.

Avoiding the Linux smp_call_function infrastructure and (if supported)
using true NMI IPIs makes this more robust.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-03 22:59:09 +10:00
Dan Williams
976431b02c dax, dm: allow device-mapper to operate without dax support
Change device-mapper's DAX dependency to require the presence of at
least one DAX_DRIVER. This allows device-mapper to be built without
bringing the DAX core along which is especially wasteful when there are
no DAX drivers, like BLK_DEV_PMEM, configured.

Cc: Alasdair Kergon <agk@redhat.com>
Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-03 05:41:19 -07:00
Dan Williams
2080e88aec dax: introduce CONFIG_DAX_DRIVER
In support of allowing device-mapper to compile out idle/dead code when
there are no dax providers in the system, introduce the DAX_DRIVER
symbol. This is selected by all leaf drivers that device-mapper might be
layered on top. This allows device-mapper to conditionally 'select DAX'
only when a provider is present.

Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Reported-by: Bart Van Assche <Bart.VanAssche@wdc.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-03 05:41:19 -07:00
Dan Williams
d2c997c0f1 fs, dax: use page->mapping to warn if truncate collides with a busy page
Catch cases where extent unmap operations encounter pages that are
pinned / busy. Typically this is pinned pages that are under active dma.
This warning is a canary for potential data corruption as truncated
blocks could be allocated to a new file while the device is still
performing i/o.

Here is an example of a collision that this implementation catches:

 WARNING: CPU: 2 PID: 1286 at fs/dax.c:343 dax_disassociate_entry+0x55/0x80
 [..]
 Call Trace:
  __dax_invalidate_mapping_entry+0x6c/0xf0
  dax_delete_mapping_entry+0xf/0x20
  truncate_exceptional_pvec_entries.part.12+0x1af/0x200
  truncate_inode_pages_range+0x268/0x970
  ? tlb_gather_mmu+0x10/0x20
  ? up_write+0x1c/0x40
  ? unmap_mapping_range+0x73/0x140
  xfs_free_file_space+0x1b6/0x5b0 [xfs]
  ? xfs_file_fallocate+0x7f/0x320 [xfs]
  ? down_write_nested+0x40/0x70
  ? xfs_ilock+0x21d/0x2f0 [xfs]
  xfs_file_fallocate+0x162/0x320 [xfs]
  ? rcu_read_lock_sched_held+0x3f/0x70
  ? rcu_sync_lockdep_assert+0x2a/0x50
  ? __sb_start_write+0xd0/0x1b0
  ? vfs_fallocate+0x20c/0x270
  vfs_fallocate+0x154/0x270
  SyS_fallocate+0x43/0x80
  entry_SYSCALL_64_fastpath+0x1f/0x96

Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-03 05:41:19 -07:00
Dan Williams
fb094c9074 ext2, dax: introduce ext2_dax_aops
In preparation for the dax implementation to start associating dax pages
to inodes via page->mapping, we need to provide a 'struct
address_space_operations' instance for dax. Otherwise, direct-I/O
triggers incorrect page cache assumptions and warnings.

Reviewed-by: Jan Kara <jack@suse.com>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2018-04-03 05:41:05 -07:00
Nicholas Piggin
a2b5e056b7 powerpc/powernv: Fix SMT4 forcing idle code
The PSSCR value is not stored to PACA_REQ_PSSCR if the CPU does not
have the XER[SO] bug.

Fix this by storing up-front, outside the workaround code. The initial
test is not required because it is a slow path.

The workaround is made to depend on CONFIG_KVM_BOOK3S_HV_POSSIBLE, to
match pnv_power9_force_smt4_catch() where it is used. Drop the comment
on pnv_power9_force_smt4_catch() as it's no longer true.

Fixes: 7672691a08 ("powerpc/powernv: Provide a way to force a core into SMT4 mode")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-03 22:14:27 +10:00
Michael Ellerman
b6f534d1a6 selftests/powerpc: Fix copyloops build since Power4 assembler change
The recent commit 15a3204d24 ("powerpc/64s: Set assembler machine
type to POWER4") set the machine type in our ASFLAGS when building the
kernel, and removed some ".machine power4" directives from various asm
files.

This broke the selftests build on old toolchains (that don't assume
Power4), because we build the kernel source files into the selftests
using different ASFLAGS.

The fix is simply to add -mpower4 to the selftest ASFLAGS as well.

Fixes: 15a3204d24 ("powerpc/64s: Set assembler machine type to POWER4")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-03 21:50:09 +10:00
Mauricio Faria de Oliveira
6232774f15 powerpc/pseries: Restore default security feature flags on setup
After migration the security feature flags might have changed (e.g.,
destination system with unpatched firmware), but some flags are not
set/clear again in init_cpu_char_feature_flags() because it assumes
the security flags to be the defaults.

Additionally, if the H_GET_CPU_CHARACTERISTICS hypercall fails then
init_cpu_char_feature_flags() does not run again, which potentially
might leave the system in an insecure or sub-optimal configuration.

So, just restore the security feature flags to the defaults assumed
by init_cpu_char_feature_flags() so it can set/clear them correctly,
and to ensure safe settings are in place in case the hypercall fail.

Fixes: f636c14790 ("powerpc/pseries: Set or clear security feature flags")
Depends-on: 19887d6a28e2 ("powerpc: Move default security feature flags")
Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-03 21:50:09 +10:00
Mauricio Faria de Oliveira
e7347a8683 powerpc: Move default security feature flags
This moves the definition of the default security feature flags
(i.e., enabled by default) closer to the security feature flags.

This can be used to restore current flags to the default flags.

Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-03 21:50:08 +10:00
Nicholas Piggin
252988cbf0 powerpc: Don't write to DABR on >= Power8 if DAWR is disabled
flush_thread() calls __set_breakpoint() via set_debug_reg_defaults()
without checking ppc_breakpoint_available(). On Power8 or later CPUs
which have the DAWR feature disabled that will cause a write to the
DABR which is incorrect as those CPUs don't have a DABR.

Fix it two ways, by checking ppc_breakpoint_available() in
set_debug_reg_defaults(), and also by reworking __set_breakpoint() to
only write to DABR on Power7 or earlier.

Fixes: 9654153158 ("powerpc: Disable DAWR in the base POWER9 CPU features")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[mpe: Rework the logic in __set_breakpoint()]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-03 21:50:08 +10:00
Nicholas Piggin
e303c08787 KVM: PPC: Book3S HV: Fix ppc_breakpoint_available compile error
arch/powerpc/kvm/book3s_hv.c: In function ‘kvmppc_h_set_mode’:
arch/powerpc/kvm/book3s_hv.c:745:8: error: implicit declaration of function ‘ppc_breakpoint_available’
   if (!ppc_breakpoint_available())
        ^~~~~~~~~~~~~~~~~~~~~~~~

Fixes: 398e712c00 ("KVM: PPC: Book3S HV: Return error from h_set_mode(SET_DAWR) on POWER9")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-03 21:50:07 +10:00
Aneesh Kumar K.V
a6201da34f powerpc: Fix oops due to bad access of lppaca on bare metal
Commit 8e0b634b13 ("powerpc/64s: Do not allocate lppaca if we are
not virtualized") removed allocation of lppaca on bare metal
platforms. But with CONFIG_PPC_SPLPAR enabled, we still access the
lppaca on bare metal in some code paths.

Fix this but adding runtime checks for SPLPAR (shared processor LPAR).

Fixes: 8e0b634b13 ("powerpc/64s: Do not allocate lppaca if we are not virtualized")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2018-04-03 21:50:07 +10:00
Niklas Cassel
16b17cad09 misc: pci_endpoint_test: Handle 64-bit BARs properly
A 64-bit BAR consists of a BAR pair, where the second BAR has the
upper bits, so we cannot simply call pci_ioremap_bar() on every single
BAR index.

The second BAR in a BAR pair will not have the IORESOURCE_MEM resource
flag set. Only call ioremap on BARs that have the IORESOURCE_MEM
resource flag set.

pci 0000:01:00.0: BAR 4: assigned [mem 0xc0300000-0xc031ffff 64bit]
pci 0000:01:00.0: BAR 2: assigned [mem 0xc0320000-0xc03203ff 64bit]
pci 0000:01:00.0: BAR 0: assigned [mem 0xc0320400-0xc03204ff 64bit]
pci-endpoint-test 0000:01:00.0: can't ioremap BAR 1: [??? 0x00000000 flags 0x0]
pci-endpoint-test 0000:01:00.0: failed to read BAR1
pci-endpoint-test 0000:01:00.0: can't ioremap BAR 3: [??? 0x00000000 flags 0x0]
pci-endpoint-test 0000:01:00.0: failed to read BAR3
pci-endpoint-test 0000:01:00.0: can't ioremap BAR 5: [??? 0x00000000 flags 0x0]
pci-endpoint-test 0000:01:00.0: failed to read BAR5

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:38:06 +01:00
Niklas Cassel
96a3be4326 PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly
Since a 64-bit BAR consists of a BAR pair, we need to write to both
BARs in the BAR pair to clear the BAR properly.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:38:06 +01:00
Niklas Cassel
6474a4e554 PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing
Since a 64-bit BAR consists of a BAR pair, and since there is no
BAR after BAR_5, BAR_5 cannot be 64-bits wide.

This sanity check is done in pci_epc_clear_bar(), so that we don't need
to do this sanity check in all epc->ops->clear_bar() implementations.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:38:05 +01:00
Niklas Cassel
77d08dbdae PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar
Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar.

This is needed so that epc->ops->clear_bar() can clear the BAR pair,
if the BAR is 64-bits wide.

This also makes it possible for pci_epc_clear_bar() to sanity check
the flags.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2018-04-03 12:38:05 +01:00
Niklas Cassel
fca8305875 PCI: endpoint: Handle 64-bit BARs properly
If a 64-bit BAR was set-up, we need to skip a BAR,
since a 64-bit BAR consists of a BAR pair.

We need to check what BAR width the epc->ops->set_bar() specific
implementation actually did set-up, since some drivers, like the
Cadence EP controller, sometimes sets up a 64-bit BAR, even though
a 32-bit BAR was requested.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:38:04 +01:00
Niklas Cassel
a2ea8ac4ec PCI: cadence: Set PCI_BASE_ADDRESS_MEM_TYPE_64 if a 64-bit BAR was set-up
cdns_pcie_ep_set_bar() does some round-up of the BAR size, which means
that a 64-bit BAR can be set-up, even when the flag
PCI_BASE_ADDRESS_MEM_TYPE_64 isn't set.

If a 64-bit BAR was set-up, set the flag PCI_BASE_ADDRESS_MEM_TYPE_64,
so that the calling function can know what BAR width that was actually
set-up.

I'm not sure why cdns_pcie_ep_set_bar() doesn't obey the flag
PCI_BASE_ADDRESS_MEM_TYPE_64, but I leave this for the MAINTAINER to
fix, since there might be a reason why this flag is ignored.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Alan Douglas <adouglas@cadence.com>
2018-04-03 12:38:04 +01:00
Niklas Cassel
d28810ba78 PCI: designware-ep: Make dw_pcie_ep_set_bar() handle 64-bit BARs properly
Since a 64-bit BAR consists of a BAR pair, we need to write to both
BARs in the BAR pair to setup the BAR properly.

Link: https://lkml.kernel.org/r/20180328115018.31921-7-niklas.cassel@axis.com
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
[lorenzo.pieralisi@arm.com: updated code according to review]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
2018-04-03 12:33:08 +01:00
Niklas Cassel
f25b5fae29 PCI: endpoint: Setting a BAR size > 4 GB is invalid if 64-bit flag is not set
Setting a BAR size > 4 GB is invalid if PCI_BASE_ADDRESS_MEM_TYPE_64
flag is not set.

This sanity check is done in pci_epc_set_bar(), so that we don't need
to do this sanity check in all epc->ops->set_bar() implementations.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:23:58 +01:00
Niklas Cassel
3567a4edd6 PCI: endpoint: Setting 64-bit/prefetch bit is invalid when IO is set
If flag PCI_BASE_ADDRESS_SPACE_IO is set, also having any
PCI_BASE_ADDRESS_MEM_* bit set is invalid.

This sanity check is done in pci_epc_set_bar(), so that we don't need
to do this sanity check in all epc->ops->set_bar() implementations.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:23:52 +01:00
Niklas Cassel
f16b1f6fdf PCI: endpoint: Setting BAR_5 to 64-bits wide is invalid
Since a 64-bit BAR consists of a BAR pair, and since there is no
BAR after BAR_5, BAR_5 cannot be 64-bits wide.

This sanity check is done in pci_epc_set_bar(), so that we don't need
to do this sanity check in all epc->ops->set_bar() implementations.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:23:47 +01:00
Niklas Cassel
bc4a48976f PCI: endpoint: Simplify epc->ops->set_bar()/pci_epc_set_bar()
Add barno and flags to struct epf_bar.
That way we can simplify epc->ops->set_bar()/pci_epc_set_bar()
by passing a struct *epf_bar instead of a whole lot of arguments.

This is needed so that epc->ops->set_bar() implementations can
modify BAR flags. Will be utilized in a succeeding patch.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:23:38 +01:00
Niklas Cassel
bf597574b6 PCI: endpoint: BAR width should not depend on sizeof dma_addr_t
If a BAR supports 64-bit width or not depends on the hardware,
and should thus not depend on sizeof(dma_addr_t).

If a certain hardware doesn't support 64-bit BARs, its
epc->ops->set_bar() implementation should return -EINVAL
when PCI_BASE_ADDRESS_MEM_TYPE_64 is set.

We can't change pci_epc_set_bar() to only set
PCI_BASE_ADDRESS_MEM_TYPE_64 based on size, since if the user,
for some reason, wants to configure a BAR with a 64-bit width,
even though the BAR size is less than 4 GB, he should be able
to do that.

However, since pci-epf-test is simply a test and not an API,
we can set PCI_BASE_ADDRESS_MEM_TYPE_64 in pci-epf-test itself
only based on size.

Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
2018-04-03 12:23:30 +01:00
Kirill A. Shutemov
9a3b7e5e65 x86/mm: Fix documentation of module mapping range with 4-level paging
Commit:

  f5a40711fa ("x86/mm: Set MODULES_END to 0xffffffffff000000")

changed MODULES_END back to a fixed value, but didn't update the documentation
of memory layout for 4-level paging.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: f5a40711fa ("x86/mm: Set MODULES_END to 0xffffffffff000000")
Link: http://lkml.kernel.org/r/20180402121025.10244-1-kirill.shutemov@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-03 12:59:02 +02:00
Alexander Kappner
a986c75a7d platform/x86: thinkpad_acpi: Add 2nd Fan Support for Thinkpad P50
The Thinkpad P50 has 2 fans. Add the 2FAN quirk so the tpacpi driver
properly reports both fan speeds.
Because the P50 doesn't report the version of its EC controller,
we need to identify it by BIOS version (N1).

Signed-off-by: Alexander Kappner <agk@godking.net>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
[andy: renamed macro, massaged changelog]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2018-04-03 11:06:04 +03:00
Takashi Iwai
a820ccbe21 ALSA: pcm: Fix UAF at PCM release via PCM timer access
The PCM runtime object is created and freed dynamically at PCM stream
open / close time.  This is tracked via substream->runtime, and it's
cleared at snd_pcm_detach_substream().

The runtime object assignment is protected by PCM open_mutex, so for
all PCM operations, it's safely handled.  However, each PCM substream
provides also an ALSA timer interface, and user-space can access to
this while closing a PCM substream.  This may eventually lead to a
UAF, as snd_pcm_timer_resolution() tries to access the runtime while
clearing it in other side.

Fortunately, it's the only concurrent access from the PCM timer, and
it merely reads runtime->timer_resolution field.  So, we can avoid the
race by reordering kfree() and wrapping the substream->runtime
clearance with the corresponding timer lock.

Reported-by: syzbot+8e62ff4e07aa2ce87826@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-03 08:36:40 +02:00
Linus Torvalds
642e7fd233 Merge branch 'syscalls-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux
Pull removal of in-kernel calls to syscalls from Dominik Brodowski:
 "System calls are interaction points between userspace and the kernel.
  Therefore, system call functions such as sys_xyzzy() or
  compat_sys_xyzzy() should only be called from userspace via the
  syscall table, but not from elsewhere in the kernel.

  At least on 64-bit x86, it will likely be a hard requirement from
  v4.17 onwards to not call system call functions in the kernel: It is
  better to use use a different calling convention for system calls
  there, where struct pt_regs is decoded on-the-fly in a syscall wrapper
  which then hands processing over to the actual syscall function. This
  means that only those parameters which are actually needed for a
  specific syscall are passed on during syscall entry, instead of
  filling in six CPU registers with random user space content all the
  time (which may cause serious trouble down the call chain). Those
  x86-specific patches will be pushed through the x86 tree in the near
  future.

  Moreover, rules on how data may be accessed may differ between kernel
  data and user data. This is another reason why calling sys_xyzzy() is
  generally a bad idea, and -- at most -- acceptable in arch-specific
  code.

  This patchset removes all in-kernel calls to syscall functions in the
  kernel with the exception of arch/. On top of this, it cleans up the
  three places where many syscalls are referenced or prototyped, namely
  kernel/sys_ni.c, include/linux/syscalls.h and include/linux/compat.h"

* 'syscalls-next' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: (109 commits)
  bpf: whitelist all syscalls for error injection
  kernel/sys_ni: remove {sys_,sys_compat} from cond_syscall definitions
  kernel/sys_ni: sort cond_syscall() entries
  syscalls/x86: auto-create compat_sys_*() prototypes
  syscalls: sort syscall prototypes in include/linux/compat.h
  net: remove compat_sys_*() prototypes from net/compat.h
  syscalls: sort syscall prototypes in include/linux/syscalls.h
  kexec: move sys_kexec_load() prototype to syscalls.h
  x86/sigreturn: use SYSCALL_DEFINE0
  x86: fix sys_sigreturn() return type to be long, not unsigned long
  x86/ioport: add ksys_ioperm() helper; remove in-kernel calls to sys_ioperm()
  mm: add ksys_readahead() helper; remove in-kernel calls to sys_readahead()
  mm: add ksys_mmap_pgoff() helper; remove in-kernel calls to sys_mmap_pgoff()
  mm: add ksys_fadvise64_64() helper; remove in-kernel call to sys_fadvise64_64()
  fs: add ksys_fallocate() wrapper; remove in-kernel calls to sys_fallocate()
  fs: add ksys_p{read,write}64() helpers; remove in-kernel calls to syscalls
  fs: add ksys_truncate() wrapper; remove in-kernel calls to sys_truncate()
  fs: add ksys_sync_file_range helper(); remove in-kernel calls to syscall
  kernel: add ksys_setsid() helper; remove in-kernel call to sys_setsid()
  kernel: add ksys_unshare() helper; remove in-kernel calls to sys_unshare()
  ...
2018-04-02 21:22:12 -07:00
Omar Sandoval
21035965f6 bitmap: fix memset optimization on big-endian systems
Commit 2a98dc028f ("include/linux/bitmap.h: turn bitmap_set and
bitmap_clear into memset when possible") introduced an optimization to
bitmap_{set,clear}() which uses memset() when the start and length are
constants aligned to a byte.

This is wrong on big-endian systems; our bitmaps are arrays of unsigned
long, so bit n is not at byte n / 8 in memory.  This was caught by the
Btrfs selftests, but the bitmap selftests also fail when run on a
big-endian machine.

We can still use memset if the start and length are aligned to an
unsigned long, so do that on big-endian.  The same problem applies to
the memcmp in bitmap_equal(), so fix it there, too.

Fixes: 2a98dc028f ("include/linux/bitmap.h: turn bitmap_set and bitmap_clear into memset when possible")
Fixes: 2c6deb0152 ("bitmap: use memcmp optimisation in more situations")
Cc: stable@kernel.org
Reported-by: "Erhard F." <erhard_f@mailbox.org>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-04-02 20:52:27 -07:00
Palmer Dabbelt
7a8e7da422
RISC-V: Fixes to module loading
This cleans up the module support that was commited earlier to work with
what's actually emitted from our GCC port as it lands upstream.  Most of
the work here is adding new relocations to the kernel.

There's some limitations on module loading imposed by the kernel:

* The kernel doesn't support linker relaxation, which is necessary to
  support R_RISCV_ALIGN.  In order to get reliable module building
  you're going to need to a GCC that supports the new '-mno-relax',
  which IIRC isn't going to be out until 8.1.0.  It's somewhat unlikely
  that R_RISCV_ALIGN will appear in a module even without '-mno-relax'
  support, so issues shouldn't be common.

* There is no large code model for RISC-V, which means modules must be
  loaded within a 32-bit signed offset of the kernel.  We don't
  currently have any mechanism for ensuring this memory remains free or
  moving pages around, so issues here might be common.

I fixed a singcle merge conflict in arch/riscv/kernel/Makefile.
2018-04-02 20:43:14 -07:00
Palmer Dabbelt
2c9046b71b
RISC-V: Assorted memory model fixes
These fixes fall into three categories

* The definiton of __smp_{store_release,load_acquire}, which allow us to
  emit a full fence when unnecessary.
* Fixes to avoid relying on the behavior of "*.aqrl" atomics, as those
  are specified in the currently released RISC-V memory model draft in
  a way that makes them useless for Linux.  This might change in the
  future, but now the code matches the memory model spec as it's written
  so at least we're getting closer to something sane.  The actual fix is
  to delete the RISC-V specific atomics and drop back to generic
  versions that use the new fences from above.
* Cleanups to our atomic macros, which are mostly non-functional
  changes.

Unfortunately I haven't given these as thorough of a testing as I
probably should have, but I've poked through the code and they seem
generally OK.
2018-04-02 20:36:33 -07:00
Palmer Dabbelt
1cead2d7fe
RISC-V: Add dynamic ftrace support for RISC-V platforms
This patch set includes the building blocks of dynamic ftrace features
for RISC-V machines.  I'm afraid I'm not very familiar with ftrace, but
the code looks OK to me.  It's been used to track down a performance
problem in our SPI driver and appears to work acceptably, but we haven't
given it a whole lot of banging yet so there might still be some bugs
lurking around somewhere.
2018-04-02 20:30:49 -07:00
Linus Torvalds
f5a8eb632b arch: remove obsolete architecture ports
This removes the entire architecture code for blackfin, cris, frv, m32r,
 metag, mn10300, score, and tile, including the associated device drivers.
 
 I have been working with the (former) maintainers for each one to ensure
 that my interpretation was right and the code is definitely unused in
 mainline kernels. Many had fond memories of working on the respective
 ports to start with and getting them included in upstream, but also saw
 no point in keeping the port alive without any users.
 
 In the end, it seems that while the eight architectures are extremely
 different, they all suffered the same fate: There was one company
 in charge of an SoC line, a CPU microarchitecture and a software
 ecosystem, which was more costly than licensing newer off-the-shelf
 CPU cores from a third party (typically ARM, MIPS, or RISC-V). It seems
 that all the SoC product lines are still around, but have not used the
 custom CPU architectures for several years at this point. In contrast,
 CPU instruction sets that remain popular and have actively maintained
 kernel ports tend to all be used across multiple licensees.
 
 The removal came out of a discussion that is now documented at
 https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
 marking any ports as deprecated but remove them all at once after I made
 sure that they are all unused. Some architectures (notably tile, mn10300,
 and blackfin) are still being shipped in products with old kernels,
 but those products will never be updated to newer kernel releases.
 
 After this series, we still have a few architectures without mainline
 gcc support:
 
 - unicore32 and hexagon both have very outdated gcc releases, but the
   maintainers promised to work on providing something newer. At least
   in case of hexagon, this will only be llvm, not gcc.
 
 - openrisc, risc-v and nds32 are still in the process of finishing their
   support or getting it added to mainline gcc in the first place.
   They all have patched gcc-7.3 ports that work to some degree, but
   complete upstream support won't happen before gcc-8.1. Csky posted
   their first kernel patch set last week, their situation will be similar.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJawdL2AAoJEGCrR//JCVInuH0P/RJAZh1nTD+TR34ZhJq2TBoo
 PgygwDU7Z2+tQVU+EZ453Gywz9/NMRFk1RWAZqrLix4ZtyIMvC6A1qfT2yH1Y7Fb
 Qh6tccQeLe4ezq5u4S/46R/fQXu3Txr92yVwzJJUuPyU0arF9rv5MmI8e6p7L1en
 yb74kSEaCe+/eMlsEj1Cc1dgthDNXGKIURHkRsILoweysCpesjiTg4qDcL+yTibV
 FP2wjVbniKESMKS6qL71tiT5sexvLsLwMNcGiHPj94qCIQuI7DLhLdBVsL5Su6gI
 sbtgv0dsq4auRYAbQdMaH1hFvu6WptsuttIbOMnz2Yegi2z28H8uVXkbk2WVLbqG
 ZESUwutGh8MzOL2RJ4jyyQq5sfo++CRGlfKjr6ImZRv03dv0pe/W85062cK5cKNs
 cgDDJjGRorOXW7dyU6jG2gRqODOQBObIv3w5efdq5OgzOWlbI4EC+Y5u1Z0JF/76
 pSwtGXA6YhwC+9LLAlnVTHG+yOwuLmAICgoKcTbzTVDKA2YQZG/cYuQfI5S1wD8e
 X6urPx3Md2GCwLXQ9mzKBzKZUpu/Tuhx0NvwF4qVxy6x1PELjn68zuP7abDHr46r
 57/09ooVN+iXXnEGMtQVS/OPvYHSa2NgTSZz6Y86lCRbZmUOOlK31RDNlMvYNA+s
 3iIVHovno/JuJnTOE8LY
 =fQ8z
 -----END PGP SIGNATURE-----

Merge tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pul removal of obsolete architecture ports from Arnd Bergmann:
 "This removes the entire architecture code for blackfin, cris, frv,
  m32r, metag, mn10300, score, and tile, including the associated device
  drivers.

  I have been working with the (former) maintainers for each one to
  ensure that my interpretation was right and the code is definitely
  unused in mainline kernels. Many had fond memories of working on the
  respective ports to start with and getting them included in upstream,
  but also saw no point in keeping the port alive without any users.

  In the end, it seems that while the eight architectures are extremely
  different, they all suffered the same fate: There was one company in
  charge of an SoC line, a CPU microarchitecture and a software
  ecosystem, which was more costly than licensing newer off-the-shelf
  CPU cores from a third party (typically ARM, MIPS, or RISC-V). It
  seems that all the SoC product lines are still around, but have not
  used the custom CPU architectures for several years at this point. In
  contrast, CPU instruction sets that remain popular and have actively
  maintained kernel ports tend to all be used across multiple licensees.

  [ See the new nds32 port merged in the previous commit for the next
    generation of "one company in charge of an SoC line, a CPU
    microarchitecture and a software ecosystem"   - Linus ]

  The removal came out of a discussion that is now documented at
  https://lwn.net/Articles/748074/. Unlike the original plans, I'm not
  marking any ports as deprecated but remove them all at once after I
  made sure that they are all unused. Some architectures (notably tile,
  mn10300, and blackfin) are still being shipped in products with old
  kernels, but those products will never be updated to newer kernel
  releases.

  After this series, we still have a few architectures without mainline
  gcc support:

   - unicore32 and hexagon both have very outdated gcc releases, but the
     maintainers promised to work on providing something newer. At least
     in case of hexagon, this will only be llvm, not gcc.

   - openrisc, risc-v and nds32 are still in the process of finishing
     their support or getting it added to mainline gcc in the first
     place. They all have patched gcc-7.3 ports that work to some
     degree, but complete upstream support won't happen before gcc-8.1.
     Csky posted their first kernel patch set last week, their situation
     will be similar

  [ Palmer Dabbelt points out that RISC-V support is in mainline gcc
    since gcc-7, although gcc-7.3.0 is the recommended minimum  - Linus ]"

This really says it all:

 2498 files changed, 95 insertions(+), 467668 deletions(-)

* tag 'arch-removal' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (74 commits)
  MAINTAINERS: UNICORE32: Change email account
  staging: iio: remove iio-trig-bfin-timer driver
  tty: hvc: remove tile driver
  tty: remove bfin_jtag_comm and hvc_bfin_jtag drivers
  serial: remove tile uart driver
  serial: remove m32r_sio driver
  serial: remove blackfin drivers
  serial: remove cris/etrax uart drivers
  usb: Remove Blackfin references in USB support
  usb: isp1362: remove blackfin arch glue
  usb: musb: remove blackfin port
  usb: host: remove tilegx platform glue
  pwm: remove pwm-bfin driver
  i2c: remove bfin-twi driver
  spi: remove blackfin related host drivers
  watchdog: remove bfin_wdt driver
  can: remove bfin_can driver
  mmc: remove bfin_sdh driver
  input: misc: remove blackfin rotary driver
  input: keyboard: remove bf54x driver
  ...
2018-04-02 20:20:12 -07:00
Yunlong Song
c79d152094 f2fs: make assignment of t->dentry_bitmap more readable
In make_dentry_ptr_block, it is confused with "&" for t->dentry_bitmap
but without "&" for t->dentry, so delete "&" to make code more readable.

Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-02 20:09:35 -07:00
Jaegeuk Kim
dc7a10ddee f2fs: truncate preallocated blocks in error case
If write is failed, we must deallocate the blocks that we couldn't write.

Cc: stable@vger.kernel.org
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-04-02 20:09:34 -07:00
Dave Chinner
0612d11663 xfs: fix intent use-after-free on abort
When an intent is aborted during it's initial commit through
xfs_defer_trans_abort(), there is a use after free. The current
report is for a RUI  through this path in generic/388:

 Freed by task 6274:
  __kasan_slab_free+0x136/0x180
  kmem_cache_free+0xe7/0x4b0
  xfs_trans_free_items+0x198/0x2e0
  __xfs_trans_commit+0x27f/0xcc0
  xfs_trans_roll+0x17b/0x2a0
  xfs_defer_trans_roll+0x6ad/0xe60
  xfs_defer_finish+0x2a6/0x2140
  xfs_alloc_file_space+0x53a/0xf90
  xfs_file_fallocate+0x5c6/0xac0
  vfs_fallocate+0x2f5/0x930
  ioctl_preallocate+0x1dc/0x320
  do_vfs_ioctl+0xfe4/0x1690

The problem is that the RUI has two active references - one in the
current transaction, and another held by the defer_ops structure
that is passed to the RUD (intent done) so that both the intent and
the intent done structures are freed on commit of the intent done.

Hence during abort, we need to release the intent item, because the
defer_ops reference is released separately via ->abort_intent
callback. Fix all the intent code to do this correctly.

Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-04-02 20:08:27 -07:00
Zong Li
e21d54219c
RISC-V: Add definition of relocation types
Signed-off-by: Zong Li <zong@andestech.com>
Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
2018-04-02 20:00:56 -07:00