Commit graph

752,023 commits

Author SHA1 Message Date
David Sterba
95b757c164 btrfs: drop fs_info parameter from tree_mod_log_free_eb
It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:54 +02:00
David Sterba
db7279a20b btrfs: drop fs_info parameter from tree_mod_log_free_eb
It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:53 +02:00
David Sterba
e09c2efe7e btrfs: drop fs_info parameter from tree_mod_log_insert_key
It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:53 +02:00
David Sterba
6074d45f60 btrfs: drop fs_info parameter from tree_mod_log_insert_move
It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:53 +02:00
David Sterba
3ac6de1abd btrfs: drop fs_info parameter from tree_mod_log_set_node_key
It's provided by the extent_buffer.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:53 +02:00
David Sterba
b8b3d625ce btrfs: document more parameters of submit_extent_page
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:53 +02:00
David Sterba
0c8508a6e7 btrfs: cleanup merging conditions in submit_extent_page
The merge call was factored out to a separate helper but it's a trivial
one and arguably we can opencode it and cache the value.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:53 +02:00
David Sterba
8eec8296a0 btrfs: remove redundant variable in __do_readpage
The value of page_end is only stored to end, no other use.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:52 +02:00
David Sterba
5c2b1fd753 btrfs: assume that bio_ret is always valid in submit_extent_page
All callers pass a valid pointer so we can drop the redundant checks.
The call to submit_one_bio never happend and can be removed.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:52 +02:00
Liu Bo
6ca1765b36 Btrfs: scrub: batch rebuild for raid56
In case of raid56, writes and rebuilds always take BTRFS_STRIPE_LEN(64K)
as unit, however, scrub_extent() sets blocksize as unit, so rebuild
process may be triggered on every block on a same stripe.

A typical example would be that when we're replacing a disappeared disk,
all reads on the disks get -EIO, every block (size is 4K if blocksize is
4K) would go thru these,

scrub_handle_errored_block
  scrub_recheck_block # re-read pages one by one
  scrub_recheck_block # rebuild by calling raid56_parity_recover()
                        page by page

Although with raid56 stripe cache most of reads during rebuild can be
avoided, the parity recover calculation(xor or raid6 algorithms) needs to
be done $(BTRFS_STRIPE_LEN / blocksize) times.

This makes it smarter by doing raid56 scrub/replace on stripe length.

Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:52 +02:00
David Sterba
416a72022e btrfs: sort and group mount option definitions
Sort mount options by the primary name, followed by the 'no-'
counterpart if it exists. Group the deprecated and debugging options.
Enum and token defintions are synced.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:52 +02:00
Howard McLauchlan
62b8e07731 btrfs: Add nossd_spread mount option
Btrfs has two mount options for SSD optimizations: ssd and ssd_spread.
Presently there is an option to disable all SSD optimizations, but there
isn't an option to disable just ssd_spread.

This patch adds a mount option nossd_spread that disables ssd_spread
only.

Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Howard McLauchlan <hmclauchlan@fb.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:52 +02:00
Nikolay Borisov
92e2f7e370 btrfs: Remove btrfs_fs_info::open_ioctl_trans
Since userspace transaction have been removed we no longer have use
for this field so delete it.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:51 +02:00
Nikolay Borisov
bcf3a3e7fb btrfs: Remove code referencing unused TRANS_USERSPACE
Now that the userspace transaction ioctls have been removed,
TRANS_USERSPACE is no longer used hence we can remove it.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:51 +02:00
Nikolay Borisov
859e682d58 btrfs: Remove btrfs_file_private::trans
Now that the userspace transaction IOCTL have been removed, this member
is no longer used so just remove it

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:51 +02:00
Nikolay Borisov
7a5a07a810 btrfs: Remove userspace transaction ioctls
Commit 3558d4f88e ("btrfs: Deprecate userspace transaction ioctls")
marked the beginning of the end of userspace transaction. This commit
finishes the job! There are no known users and ceph does not use the
ioctl anymore.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Acked-by: Sage Weil <sage@redhat.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:51 +02:00
Qu Wenruo
4d31778aa2 btrfs: qgroup: Fix root item corruption when multiple same source snapshots are created with quota enabled
When multiple pending snapshots referring to the same source subvolume
are executed, enabled quota will cause root item corruption, where root
items are using old bytenr (no backref in extent tree).

This can be triggered by fstests btrfs/152.

The cause is when source subvolume is still dirty, extra commit
(simplied transaction commit) of qgroup_account_snapshot() can skip
dirty roots not recorded in current transaction, making root item of
source subvolume not updated.

Fix it by forcing recording source subvolume in current transaction
before qgroup sub-transaction commit.

Reported-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:51 +02:00
Nikolay Borisov
2e32ef87b0 btrfs: Relax memory barrier in btrfs_tree_unlock
When performing an unlock on an extent buffer we'd like to order the
decrement of extent_buffer::blocking_writers with waking up any
waiters. In such situations it's sufficient to use smp_mb__after_atomic
rather than the heavy smp_mb. On architectures where atomic operations
are fully ordered (such as x86 or s390) unconditionally executing
a heavyweight smp_mb instruction causes a severe hit to performance
while bringin no improvements in terms of correctness.

The better thing is to use the appropriate smp_mb__after_atomic routine
which will do the correct thing (invoke a full smp_mb or in the case
of ordered atomics insert a compiler barrier). Put another way,
an RMW atomic op + smp_load__after_atomic equals, in terms of
semantics, to a full smp_mb. This ensures that none of the problems
described in the accompanying comment of waitqueue_active occur.
No functional changes.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:51 +02:00
Anand Jain
7c829b722d btrfs: add define for oldest generation
Some functions can filter metadata by the generation. Add a define that
will annotate such arguments.

Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:50 +02:00
David Sterba
051c98eb11 btrfs: open code trivial helper btrfs_page_exists_in_range
The called function name is self explanatory.

Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:50 +02:00
Matthew Wilcox
965aab1cfc btrfs: Use filemap_range_has_page()
The current implementation of btrfs_page_exists_in_range() gives the
wrong answer if the workingset code has stored a shadow entry in the
page cache.  The filemap_range_has_page() function does not have this
problem, and it's shared code, so use it instead.

eigned-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31 01:26:45 +02:00
Tariq Toukan
ea3886cab7 net/mlx5e: Use inline MTTs in UMR WQEs
When modifying the page mapping of a HW memory region
(via a UMR post), post the new values inlined in WQE,
instead of using a data pointer.

This is a micro-optimization, inline UMR WQEs of different
rings scale better in HW.

In addition, this obsoletes a few control flows and helps
delete ~50 LOC.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-30 16:16:17 -07:00
Tariq Toukan
e4d86a4a58 net/mlx5e: Do not busy-wait for UMR completion in Striding RQ
Do not busy-wait a pending UMR completion. Under high HW load,
busy-waiting a delayed completion would fully utilize the CPU core
and mistakenly indicate a SW bottleneck.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-30 16:16:17 -07:00
Tariq Toukan
18187fb2c3 net/mlx5e: Code movements in RX UMR WQE post
Gets the process of a UMR WQE post in one function,
in preparation for a downstream patch that inlines
the WQE data.
No functional change here.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-30 16:16:17 -07:00
Tariq Toukan
73281b78a3 net/mlx5e: Derive Striding RQ size from MTU
In Striding RQ, each WQE serves multiple packets
(hence called Multi-Packet WQE, MPWQE).
The size of a MPWQE is constant (currently 256KB).

Upon a ringparam set operation, we calculate the number of
MPWQEs per RQ. For this, first it is needed to determine the
number of packets that can reside within a single MPWQE.
In this patch we use the actual MTU size instead of ETH_DATA_LEN
for this calculation.

This implies that a change in MTU might require a change
in Striding RQ ring size.

In addition, this obsoletes some WQEs-to-packets translation
functions and helps delete ~60 LOC.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-30 16:16:17 -07:00
Tariq Toukan
472a1e44b3 net/mlx5e: Save MTU in channels params
Knowing the MTU is required for RQ creation flow.
By our design, channels creation flow is totally isolated
from priv/netdev, and can be completed with access to
channels params and mdev.
Adding the MTU to the channels params helps preserving that.
In addition, we save it in RQ to make its access faster in
datapath checks.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-30 16:16:17 -07:00
Talat Batheesh
533788988c net/mlx5e: IPoIB, Fix spelling mistake
Fix spelling mistake in debug message text.
"dettaching" -> "detaching"

Signed-off-by: Talat Batheesh <talatb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-30 16:16:17 -07:00
Alaa Hleihel
6c75062823 net/mlx5: Change teardown with force mode failure message to warning
With ConnectX-4, we expect the force teardown to fail in case that
DC was enabled, therefore change the message from error to warning.

Signed-off-by: Alaa Hleihel <alaa@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-30 16:16:17 -07:00
Saeed Mahameed
b2d3907c23 net/mlx5: Eliminate query xsrq dead code
1. This function is not used anywhere in mlx5 driver
2. It has a memcpy statement that makes no sense and produces build
warning with gcc8

drivers/net/ethernet/mellanox/mlx5/core/transobj.c: In function 'mlx5_core_query_xsrq':
drivers/net/ethernet/mellanox/mlx5/core/transobj.c:347:3: error: 'memcpy' source argument is the same as destination [-Werror=restrict]

Fixes: 01949d0109 ("net/mlx5_core: Enable XRCs and SRQs when using ISSI > 0")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-30 16:16:17 -07:00
Saeed Mahameed
7b2117bb8f net/mlx5e: Use eq ptr from cq
Instead of looking for the EQ of the CQ, remove that redundant code and
use the eq pointer stored in the cq struct.

Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-03-30 16:16:17 -07:00
Bjørn Mork
ad32eb2df8 PCI: Always define the of_node helpers
Simply move these inline functions outside the ifdef instead of duplicating
them as stubs in the !OF case.  The struct device of_node field does not
depend on OF.

This also fixes the missing stubbed pci_bus_to_OF_node().

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-03-30 17:45:57 -05:00
Mika Westerberg
4e5fad429b PCI/DPC: Do not enable DPC if AER control is not allowed by the BIOS
Commit eed85ff4c0 ("PCI/DPC: Enable DPC only if AER is available") made
DPC control dependent whether AER is enabled in the OS.  However, it does
not take into account situations where BIOS has not given OS control of
AER:

  acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
  acpi PNP0A08:00: _OSC: platform does not support [AER]
  acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]

I think here it is better not to enable DPC even if the capability is
available because then it would be against what "Determination of DPC
Control" note in PCIe 4.0 sec 6.1.10 recommends.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <helgaas@kernel.org>
2018-03-30 17:33:34 -05:00
Andi Shyti
adf313f41a Input: stmfts, s6sy761 - update my e-mail
Because I will be leaving Samsung soon, for reachability update
my reference e-mail to etezian.org.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-30 15:31:41 -07:00
Marek Szyprowski
1d96000360 Input: stmfts - use async probe & suspend/resume to avoid 2s delay
Executing stmfts_power_on() function lasts over 2 seconds, what
significantly slows down the boot and resume processes if driver is
compiled in. Avoid this delay by forcing this driver to be probed
and suspended/resumed asynchronously.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-30 15:31:41 -07:00
Masaki Ota
567b9b549c Input: ALPS - fix TrackStick detection on Thinkpad L570 and Latitude 7370
The primary interface for the touchpad device in Thinkpad L570 is SMBus,
so ALPS overlooked PS2 interface Firmware setting of TrackStick, and
shipped with TrackStick otp bit is disabled.

The address 0xD7 contains device number information, so we can identify
the device by checking this value, but to access it we need to enable
Command mode, and then re-enable the device. Devices shipped in Thinkpad
L570 report either 0x0C or 0x1D as device numbers, if we see them we assume
that the devices are DualPoints.

The same issue exists on Dell Latitude 7370.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196929
Fixes: 646580f793 ("Input: ALPS - fix multi-touch decoding on SS4 plus touchpads")
Signed-off-by: Masaki Ota <masaki.ota@jp.alps.com>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Tested-by: Jaak Ristioja <jaak@ristioja.ee>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2018-03-30 15:30:25 -07:00
Frederick Lawler
f0553ba08a PCI/AER: Use cached AER Capability offset
Replace pci_find_ext_capability(..., PCI_EXT_CAP_ID_ERR) calls with
pci_dev->aer_cap.

pci_dev->aer_cap is initialized in pci_init_capabilities(), which happens
before any of these users of the AER Capability.

Signed-off-by: Frederick Lawler <fred@fredlawl.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-30 17:26:59 -05:00
Bjorn Helgaas
d850882b72 PCI/portdrv: Rename and reverse sense of pcie_ports_auto
The platform may restrict the OS's use of PCIe services, e.g., via the ACPI
_OSC method.  The user may use "pcie_ports=native" to force the port driver
to use PCIe services even if the platform asked us not to.

The "pcie_ports=native" parameter determines the setting of
pcie_ports_auto.  Rename this to pcie_ports_native and reverse the
sense to simplify the code.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-30 17:26:58 -05:00
Bjorn Helgaas
842b447f00 PCI/portdrv: Encapsulate pcie_ports_auto inside the port driver
"pcie_ports_auto" is only used inside the PCIe port driver itself, so
move it from include/linux/pci.h to portdrv.h so it's not visible to the
whole kernel.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-30 17:26:58 -05:00
Bjorn Helgaas
4c0fd7648d PCI/portdrv: Remove unnecessary "pcie_ports=auto" parameter
The "pcie_ports=auto" parameter set pcie_ports_disabled and pcie_ports_auto
to their compiled-in defaults, so specifying the parameter is the same as
not using it at all.

Remove the "pcie_ports=auto" parameter and update the documentation.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2018-03-30 17:26:57 -05:00
Bjorn Helgaas
1e447c57ae PCI/portdrv: Remove "pcie_hp=nomsi" kernel parameter
7570a333d8 ("PCI: Add pcie_hp=nomsi to disable MSI/MSI-X for pciehp
driver") added the "pcie_hp=nomsi" kernel parameter to work around this
error on shutdown:

  irq 16: nobody cared (try booting with the "irqpoll" option)
  Pid: 1081, comm: reboot Not tainted 3.2.0 #1
  ...
  Disabling IRQ #16

This happened on an unspecified system (possibly involving the Integrated
Device Technology, Inc. Device 807f bridge) where "an un-wanted interrupt
is generated when PCI driver switches from MSI/MSI-X to INTx while shutting
down the device."

The implication was that the device was buggy, but it is normal for a
device to use INTx after MSI/MSI-X have been disabled.  The only problem
was that the driver was still attached and it wasn't prepared for INTx
interrupts.  Prarit Bhargava fixed this issue with fda78d7a0e ("PCI/MSI:
Stop disabling MSI/MSI-X in pci_device_shutdown()").

There is no automated way to set this parameter, so it's not very useful
for distributions or end users.  It's really only useful for debugging, and
we have "pci=nomsi" for that purpose.

Revert 7570a333d8 to remove the "pcie_hp=nomsi" parameter.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
CC: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com>
CC: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com>
CC: Prarit Bhargava <prarit@redhat.com>
2018-03-30 17:26:56 -05:00
Bjorn Helgaas
1b64cb87cf PCI/portdrv: Remove unnecessary include of <linux/pci-aspm.h>
portdrv_pci.c doesn't use anything from <linux/pci-aspm.h>.  Remove the
include of it.  No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-30 17:26:55 -05:00
Bjorn Helgaas
02bfeb4842 PCI/portdrv: Simplify PCIe feature permission checking
Some PCIe features (AER, DPC, hotplug, PME) can be managed by either the
platform firmware or the OS, so the host bridge driver may have to request
permission from the platform before using them.  On ACPI systems, this is
done by negotiate_os_control() in acpi_pci_root_add().

The PCIe port driver later uses pcie_port_platform_notify() and
pcie_port_acpi_setup() to figure out whether it can use these features.
But all we need is a single bit for each service, so these interfaces are
needlessly complicated.

Simplify this by adding bits in the struct pci_host_bridge to show when the
OS has permission to use each feature:

  + unsigned int native_aer:1;       /* OS may use PCIe AER */
  + unsigned int native_hotplug:1;   /* OS may use PCIe hotplug */
  + unsigned int native_pme:1;       /* OS may use PCIe PME */

These are set when we create a host bridge, and the host bridge driver can
clear the bits corresponding to any feature the platform doesn't want us to
use.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-30 17:26:54 -05:00
Bjorn Helgaas
168f3ae595 PCI/portdrv: Remove unused PCIE_PORT_SERVICE_VC
No driver registers for PCIE_PORT_SERVICE_VC, so remove it.

This removes the VC "service" files from /sys/bus/pci_express/devices,
e.g., 0000:07:00.0:pcie108, 0000:08:04.0:pcie208 (all the files that
contained "8" as the last digit of the "pcieXXX" part).  The port driver
created these files for PCIe port devices that have a VC Capability.

Since this reduces PCIE_PORT_DEVICE_MAXSERVICES and moves DPC down into the
spot where VC used to be, the DPC sysfs files will now be named "pcieXX8".
I don't think there's anything useful userspace can do with those files, so
I hope nobody cares about these filenames.

There is no VC driver that calls pcie_port_service_register(), so there
never was a /sys/bus/pci_express/drivers/vc directory.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-03-30 17:26:54 -05:00
Bjorn Helgaas
c6c889d932 PCI/portdrv: Remove pcie_port_bus_type link order dependency
The pcie_port_bus_type must be registered before drivers that depend on it
can be registered.  Those drivers include:

  pcied_init()                # PCIe native hotplug driver
  aer_service_init()          # AER driver
  dpc_service_init()          # DPC driver
  pcie_pme_service_init()     # PME driver

Previously we registered pcie_port_bus_type from pcie_portdrv_init(), a
device_initcall.  The callers of pcie_port_service_register() (above) are
also device_initcalls.  This is fragile because the device_initcall
ordering depends on link order, which is not explicit.

Register pcie_port_bus_type from pci_driver_init() along with pci_bus_type.
This removes the link order dependency between portdrv and the pciehp, AER,
DPC, and PCIe PME drivers.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-03-30 17:26:53 -05:00
Bjorn Helgaas
79a011194b PCI/portdrv: Disable port driver in compat mode
The "pcie_ports=compat" kernel parameter sets pcie_ports_disabled, which is
intended to disable the PCIe port driver.  But even when it was disabled,
we registered pcie_portdriver so we could work around a BIOS PME issue (see
fe31e69740 ("PCI/PCIe: Clear Root PME Status bits early during system
resume")).

Registering the driver meant that the pcie_portdrv_probe() path called
pci_enable_device(), pci_save_state(), pm_runtime_set_autosuspend_delay(),
pm_runtime_use_autosuspend(), etc., even when the driver was disabled.

We've since moved the BIOS PME workaround from the port driver to the core,
so stop registering the PCIe port driver in compat mode.

This means "pcie_ports=compat" will now be basically the same as turning
off CONFIG_PCIEPORTBUS completely.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-30 17:26:52 -05:00
Bjorn Helgaas
3620c71484 PCI/PM: Clear PCIe PME Status bit for Root Complex Event Collectors
Per PCIe r4.0, sec 6.1.6, Root Complex Event Collectors can generate PME
interrupts on behalf of Root Complex Integrated Endpoints.

Linux does not currently enable PME interrupts from RC Event Collectors,
but fe31e69740 ("PCI/PCIe: Clear Root PME Status bits early during system
resume") suggests PME interrupts may be enabled by the platform for ACPI-
based runtime wakeup.

Clear the PCIe PME Status bit for Root Complex Event Collectors during
resume, just like we already do for Root Ports.

If the BIOS enables PME interrupts for an event collector and neglects to
clear the status bit on resume, this change should fix the same bug as
fe31e69740 (PMEs not working after waking from a sleep state), but for
Root Complex Integrated Endpoints.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-03-30 17:26:51 -05:00
Michael Ellerman
f437c51748 Merge branch 'topic/paca' into next
Bring in yet another series that touches KVM code, and might need to
be merged into the kvm-ppc branch to resolve conflicts.

This required some changes in pnv_power9_force_smt4_catch/release()
due to the paca array becomming an array of pointers.
2018-03-31 09:09:36 +11:00
Daniel Borkmann
807ae7daf5 Merge branch 'bpf-sockmap-sg-api-fixes'
Prashant Bhole says:

====================
These patches fix sg api usage in sockmap. Previously sockmap didn't
use sg_init_table(), which caused hitting BUG_ON in sg api, when
CONFIG_DEBUG_SG is enabled

v1: added sg_init_table() calls wherever needed.

v2:
- Patch1 adds new helper function in sg api. sg_init_marker()
- Patch2 sg_init_marker() and sg_init_table() in appropriate places

Backgroud:
While reviewing v1, John Fastabend raised a valid point about
unnecessary memset in sg_init_table() because sockmap uses sg table
which embedded in a struct. As enclosing struct is zeroed out, there
is unnecessary memset in sg_init_table.

So Daniel Borkmann suggested to define another static inline function
in scatterlist.h which only initializes sg_magic. Also this function
will be called from sg_init_table. From this suggestion I defined a
function sg_init_marker() which sets sg_magic and calls sg_mark_end()
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-30 22:50:17 +02:00
Prashant Bhole
6ef6d84cee bpf: sockmap: initialize sg table entries properly
When CONFIG_DEBUG_SG is set, sg->sg_magic is initialized in
sg_init_table() and it is verified in sg api while navigating. We hit
BUG_ON when magic check is failed.

In functions sg_tcp_sendpage and sg_tcp_sendmsg, the struct containing
the scatterlist is already zeroed out. So to avoid extra memset, we
use sg_init_marker() to initialize sg_magic.

Fixed following things:
- In bpf_tcp_sendpage: initialize sg using sg_init_marker
- In bpf_tcp_sendmsg: Replace sg_init_table with sg_init_marker
- In bpf_tcp_push: Replace memset with sg_init_table where consumed
  sg entry needs to be re-initialized.

Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-30 22:50:15 +02:00
Prashant Bhole
f385178679 lib/scatterlist: add sg_init_marker() helper
sg_init_marker initializes sg_magic in the sg table and calls
sg_mark_end() on the last entry of the table. This can be useful to
avoid memset in sg_init_table() when scatterlist is already zeroed out

For example: when scatterlist is embedded inside other struct and that
container struct is zeroed out

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-03-30 22:50:15 +02:00