Commit graph

752,023 commits

Author SHA1 Message Date
Bernie Harris
1be3ac9844 netfilter: ebtables: Add string filter
This patch is part of a proposal to add a string filter to
ebtables, which would be similar to the string filter in
iptables. Like iptables, the ebtables filter uses the xt_string
module.

Signed-off-by: Bernie Harris <bernie.harris@alliedtelesis.co.nz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30 11:04:12 +02:00
Bernie Harris
39c202d228 netfilter: ebtables: Add support for specifying match revision
Currently ebtables assumes that the revision number of all match
modules is 0, which is an issue when trying to use existing
xtables matches with ebtables. The solution is to modify ebtables
to allow extensions to specify a revision number, similar to
iptables. This gets passed down to the kernel, which is then able
to find the match module correctly.

To main binary backwards compatibility, the size of the ebt_entry
structures is not changed, only the size of the name field is
decreased by 1 byte to make room for the revision field.

Signed-off-by: Bernie Harris <bernie.harris@alliedtelesis.co.nz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-03-30 11:03:39 +02:00
Fabio Estevam
e8de85d5a1 dt-bindings: fsl-quadspi: Add the example of two SPI NOR
Improve the bindings example by adding an example of how to represent
two SPI NOR devices.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-30 10:05:08 +02:00
Fabio Estevam
6898b240f8 mtd: fsl-quadspi: Distinguish the mtd device names
Currently on a imx6sx-sdb board, which has two SPI NOR chips connected
to QSPI2 the following output from /proc/mtd is seen:

dev:    size   erasesize  name
mtd0: 01000000 00010000 "21e4000.qspi"
mtd1: 01000000 00010000 "21e4000.qspi"

Attempts to partition them on the kernel command line result in both
chips with identical (and identically named) partitions, which is
an inconvenient behavior.

Assign a different mtd->name for each mtd device to avoid this problem.

After this change the output from /proc/mtd becomes:

dev:    size   erasesize  name
mtd0: 01000000 00010000 "21e4000.qspi-0"
mtd1: 01000000 00010000 "21e4000.qspi-1"

In order to keep mtdparts compatibility keep the mtd->name
unchanged when a single SPI NOR is present.

Reported-by: David Wolfe <david.wolfe@nxp.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-30 10:04:53 +02:00
Linus Torvalds
c2a9838452 - Fix a DM multipath regression introduced in a v4.16-rc6 commit:
restore support for loading, and attaching, scsi_dh modules during
   multipath table load.  Otherwise some users may find themselves unable
   to boot, as was reported today:
   https://marc.info/?l=linux-scsi&m=152231276114962&w=2
 
 - Fix a DM core ioctl permission check regression introduced in a
   v4.16-rc5 commit.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJavbT9AAoJEMUj8QotnQNaCO4H/iMUmvUl2tM8fPuWfp6ZXKov
 vyn9AwMQeAp2K9pE+04VaKbLazu0Z0GW4Fhf0oIFlsySKZ3VCebClTCTgNW5/AWd
 JV41T2oWY3QDoZaSep9TSPPPldXZYIniCznlxObYB47c7q5lRaFTy3NP4nMbVrvo
 24E/dbFNZ/hF+98IoPdHQ5vpIbosumYhquiKsS5zH+8XA4kR+KumeEgsmDAvwHVd
 zNJI1o8P5kdm/yM6NNUQsk5OL6knTEuVp8t4NT0V27wU6mUVY0Mo//Q/kEezPw3R
 MC1157EFxV/6N3UA6N6XW+Y6ePfzqU7+cj5QFFVJB5rdWbDWTBmlhoE5ukThZmU=
 =H2lD
 -----END PGP SIGNATURE-----

Merge tag 'for-4.16/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix a DM multipath regression introduced in a v4.16-rc6 commit:
   restore support for loading, and attaching, scsi_dh modules during
   multipath table load. Otherwise some users may find themselves unable
   to boot, as was reported today:

     https://marc.info/?l=linux-scsi&m=152231276114962&w=2

 - Fix a DM core ioctl permission check regression introduced in a
   v4.16-rc5 commit.

* tag 'for-4.16/dm-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: fix dropped return code from dm_get_bdev_for_ioctl
  dm mpath: fix support for loading scsi_dh modules during table load
2018-03-29 19:27:12 -10:00
Linus Torvalds
d89b9f5029 Fifth pull request for 4.16-rc
Bug fixes:
 - qedr driver bugfixes causing application hangs, wrong uapi errnos, and a
   race condition
 - 3 syzkaller found bugfixes in the ucma uapi
 
 Regression fixes for things introduced in 4.16:
 - Crash on error introduced in mlx5 UMR flow
 - Crash on module unload/etc introduced by bad interaction of restrack
   and mlx5 patches this cycle
 - Typo in a two line syzkaller bugfix causing a bad regression
 - Coverity report of nonsense code in hns driver
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCgAGBQJavTPwAAoJEDht9xV+IJsaMtIP/04hM1pWJAxCPtxlXFqlfLnQ
 llGvDlzyGUrFlSbDITmXXS3nVFtk36SM6Eqqa48yi7oZF+2+4JjlaqIUiYXmAOOR
 ocvpDB4QKXgnjAc9mIyJ8SOILhmSDOwwbueaKBClnyPIj5wGvrKlnAdeGDgPeuSU
 Jcmect5penbU4U44m4JtbqSNIRWuoUvrbQ6ioftHV32RnXBRyrP1KxXtM3tVvav8
 TlBgCt6zWhab1u6MGEebJgx97eFwhgc1Bd1mIJv9TPPEplC8kqaNRFrsctsyDUxu
 h674VNE5YyzoLBrUGI4IzvL5f3p8OEa18wslJB5ZyL6qiorj5y4vf+lSiQT8qOSF
 NW+jmsVEA0l0trVkl5r0qhzIV+EVTgSoR4C5wKbxEwMx51PmG/utPqFV+N511In7
 GPqmRL3KuJPBZ0TIepwoH57FwrXdfc/UiF95duLizHojJgMpbnn18pQUBj2Fofch
 Gs9IjipO8AxpYybRoGvBC7fMTrzs5IV3yNj2qxu2mCq0tRQMu1cbOh6y//YZKqjL
 wQFtUSX2rO/rcvABAgpEP7a/9aLEj5m+vsFpEtigteRQRggOH6dAxXYzK8qKFqPK
 4C9+5ybpAJqjjMuFxjd9n6BIYJG8gEhSGIyOaeP6cK016AQj4FN8ZgLwR9nTokQS
 p9DdyVZWFpqAuCWV5ML1
 =0JcN
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "It has been fairly silent lately on our -rc front. Big queue of
  patches on the mailing list going to for-next though.

  Bug fixes:
   - qedr driver bugfixes causing application hangs, wrong uapi errnos,
     and a race condition
   - three syzkaller found bugfixes in the ucma uapi

  Regression fixes for things introduced in 4.16:
   - Crash on error introduced in mlx5 UMR flow
   - Crash on module unload/etc introduced by bad interaction of
     restrack and mlx5 patches this cycle
   - Typo in a two line syzkaller bugfix causing a bad regression
   - Coverity report of nonsense code in hns driver"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/ucma: Introduce safer rdma_addr_size() variants
  RDMA/hns: ensure for-loop actually iterates and free's buffers
  RDMA/ucma: Check that device exists prior to accessing it
  RDMA/ucma: Check that device is connected prior to access it
  RDMA/rdma_cm: Fix use after free race with process_one_req
  RDMA/qedr: Fix QP state initialization race
  RDMA/qedr: Fix rc initialization on CNQ allocation failure
  RDMA/qedr: fix QP's ack timeout configuration
  RDMA/ucma: Correct option size check using optlen
  RDMA/restrack: Move restrack_clean to be symmetrical to restrack_init
  IB/mlx5: Don't clean uninitialized UMR resources
2018-03-29 19:23:24 -10:00
Linus Torvalds
ab12762b19 * Fix a bug in Atmel ECC engine driver
* Fix a bug in the CFI/JEDEC driver
 -----BEGIN PGP SIGNATURE-----
 
 iQI5BAABCAAjBQJavSJwHBxib3Jpcy5icmV6aWxsb25AYm9vdGxpbi5jb20ACgkQ
 Ze02AX4ItwAOFxAAhJOgJYjreRCw5dNzx3ckrqsuqvaTjB9SqE34tCQXgM/+ln2G
 cr2YvG1JwQ6IUaJCJIjP+IOdzGpqdujvTUS5JlJfPEE8RkZe2wvrwjMFhOQjnx/i
 U2LHv2jJPQ8+0feRQ54lmWUA7gagKUIb1nkzp3llYaPJ0mrhBgkANnf5QsZtz+NN
 Nv7OA68h1Y7HfPK4o55CS26DdORGLiv2nVpumYDf82oc1t4EJbj/Y6wxNFpmvj/H
 74MqZ8SOHF2E4pAYZC8twJPsnRMfIXfrRToHyXOb1ShxXc423j1hcltTBlxRHpfB
 +1jzmp1Ux4c3ltRZJC221NO4SJHK8roop3Mr1a4zfH256gpY6DPFMchqLEqgW2kc
 ZFdQBaw/SvVQJRXds0MvhB3O33iATWbz02FRScF6rezgAlb9It2gTTo0frs03y5C
 +Pe4wlTTcehu5Vw7QzbB3TxdAhGr3MHitvgX7biSEcF754gwtMRkA/ey9rqBUTuM
 fdZB+/Dw0g4zPMuvztn2nmX9IlvcQZ1zEcbekUPTEnpf61W+GSELz2MzM2tmBQyi
 oHxjPM9r6t9ABKr98R7lgTAoiAehG7s0d7bC7zAHNw5fHRlx0MHog+9bFYYlBFUB
 27c/LKIX1MW8ts+IF3WM2x/M2SpPoWDkboge4RGrE42VETPqJltfXtm6gdo=
 =wEYA
 -----END PGP SIGNATURE-----

Merge tag 'mtd/fixes-for-4.16' of git://git.infradead.org/linux-mtd

Pull MTD fixes from Boris Brezillon:
 "Two fixes, one in the atmel NAND driver and another one in the
  CFI/JEDEC code.

  Summary:

   - Fix a bug in Atmel ECC engine driver

   - Fix a bug in the CFI/JEDEC driver"

* tag 'mtd/fixes-for-4.16' of git://git.infradead.org/linux-mtd:
  mtd: jedec_probe: Fix crash in jedec_read_mfr()
  mtd: nand: atmel: Fix get_sectorsize() function
2018-03-29 19:21:29 -10:00
Tyson Nottingham
27f394a771 ext4: don't show data=<mode> option if defaulted
Previously, mount -l would show data=<mode> even if the ext4 default
journaling mode was being used. Change this to be consistent with the
rest of the options.

Ext4 already did the right thing when the journaling mode being used
matched the one specified in the superblock's default mount options. The
reason it failed to do the right thing for the ext4 defaults is that,
when set, they were never included in sbi->s_def_mount_opt (unlike the
superblock's defaults, which were).

Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-03-30 00:56:10 -04:00
Tyson Nottingham
ceec03764a ext4: omit init_itable=n in procfs when disabled
Don't show init_itable=n in /proc/fs/ext4/<dev>/options when filesystem
is mounted with noinit_itable.

Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-03-30 00:53:33 -04:00
Tyson Nottingham
68afa7e083 ext4: show more binary mount options in procfs
Previously, /proc/fs/ext4/<dev>/options would only show binary options
if they were set (1 in the options bit mask). E.g. it would show "grpid"
if it was set, but it would not show "nogrpid" if grpid was not set.

This seems sensible, but when an option is absent from the file, it can
be hard for the unfamiliar to know what is being used. E.g. if there
isn't a (no)grpid entry, nogrpid is in effect. But if there isn't a
(no)auto_da_alloc entry, auto_da_alloc is in effect. If there isn't a
(minixdf|bsddf) entry, it turns out bsddf is in effect. It all depends
on how the option is implemented.

It's clearer to be explicit, so print the corresponding option
regardless of whether it means a 1 or a 0 in the bit mask.

Note that options which do not have an explicit disable option aren't
indicated as being disabled even with this change (e.g. dax).

Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-03-30 00:51:10 -04:00
Tyson Nottingham
bc1420ae56 ext4: simplify kobject usage
Replace kset with generic kobject provided by kobject_create_and_add(),
since the latter is sufficient.

Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-03-30 00:41:34 -04:00
Tyson Nottingham
6ca06829fb ext4: remove unused parameters in sysfs code
Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-03-30 00:13:10 -04:00
Tyson Nottingham
c2e5df7626 ext4: null out kobject* during sysfs cleanup
Make cleanup of ext4_feat kobject consistent with similar objects.

Signed-off-by: Tyson Nottingham <tgnottingham@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2018-03-30 00:03:38 -04:00
Mike Snitzer
da5dadb4f1 dm: fix dropped return code from dm_get_bdev_for_ioctl
dm_get_bdev_for_ioctl()'s return of 0 or 1 must be the result from
prepare_ioctl (1 means the ioctl was issued to a partition, 0 means it
wasn't).  Unfortunately commit 519049afea ("dm: use blkdev_get rather
than bdgrab when issuing pass-through ioctl") reused the variable 'r'
to store the return from blkdev_get() that follows prepare_ioctl()
-- whereby dropping prepare_ioctl()'s result on the floor.

This can lead to an ioctl or persistent reservation being issued to a
partition going unnoticed, which implies the extra permission check for
CAP_SYS_RAWIO is skipped.

Fix this by using a different variable to store blkdev_get()'s return.

Fixes: 519049afea ("dm: use blkdev_get rather than bdgrab when issuing pass-through ioctl")
Reported-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-03-29 23:31:32 -04:00
Theodore Ts'o
18db4b4e6f ext4: don't allow r/w mounts if metadata blocks overlap the superblock
If some metadata block, such as an allocation bitmap, overlaps the
superblock, it's very likely that if the file system is mounted
read/write, the results will not be pretty.  So disallow r/w mounts
for file systems corrupted in this particular way.

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2018-03-29 22:10:35 -04:00
Theodore Ts'o
a45403b515 ext4: always initialize the crc32c checksum driver
The extended attribute code now uses the crc32c checksum for hashing
purposes, so we should just always always initialize it.  We also want
to prevent NULL pointer dereferences if one of the metadata checksum
features is enabled after the file sytsem is originally mounted.

This issue has been assigned CVE-2018-1094.

https://bugzilla.kernel.org/show_bug.cgi?id=199183
https://bugzilla.redhat.com/show_bug.cgi?id=1560788

Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2018-03-29 22:10:31 -04:00
Theodore Ts'o
8e4b5eae5d ext4: fail ext4_iget for root directory if unallocated
If the root directory has an i_links_count of zero, then when the file
system is mounted, then when ext4_fill_super() notices the problem and
tries to call iput() the root directory in the error return path,
ext4_evict_inode() will try to free the inode on disk, before all of
the file system structures are set up, and this will result in an OOPS
caused by a NULL pointer dereference.

This issue has been assigned CVE-2018-1092.

https://bugzilla.kernel.org/show_bug.cgi?id=199179
https://bugzilla.redhat.com/show_bug.cgi?id=1560777

Reported-by: Wen Xu <wen.xu@gatech.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@vger.kernel.org
2018-03-29 21:56:09 -04:00
David S. Miller
74957cbfb7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkman says:

====================
pull-request: bpf 2018-03-29

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix nfp to properly check max insn count while emitting
   instructions in the JIT which was wrongly comparing bytes
   against number of instructions before, from Jakub.

2) Fix for bpftool to avoid usage of hex numbers in JSON
   output since JSON doesn't accept hex numbers with 0x
   prefix, also from Jakub.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29 21:49:19 -04:00
Matias Bjørling
b65125fa57 lightnvm: remove function name in strings
For the sysfs functions, the function names are embedded into their
error strings. If the function name later changes, the string may
not be updated accordingly. Update the strings to use __func__
to avoid this.

Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Dan Carpenter
5565b0ca50 lightnvm: pblk: remove some unnecessary NULL checks
Smatch complains that flush_workqueue() dereferences the work queue
pointer but then we check if it's NULL on the next line when it's too
late.  These NULL checks can be removed because the module won't load if
we can't allocate the work queues.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Hans Holmberg
9156f360a7 lightnvm: pblk: don't recover unwritten lines
If the line has not been written to, we should not
try to recover any data from it, so check the state of the
chunks in the line before attempting to read smeta.

Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Javier González
3b2a3ad119 lightnvm: pblk: implement 2.0 support
Implement 2.0 support in pblk. This includes the address formatting and
mapping paths, as well as the sysfs entries for them.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Javier González
32ef9412c1 lightnvm: pblk: implement get log report chunk
In preparation of pblk supporting 2.0, implement the get log report
chunk in pblk. Also, define the chunk states as given in the 2.0 spec.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Javier González
bb845ae45c lightnvm: pblk: rename ppaf* to addrf*
In preparation for 2.0 support in pblk, rename variables referring to
the address format to addrf and reserve ppaf for the 1.2 path.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Javier González
7ad5039ee5 lightnvm: pblk: check for supported version
At this point, only 1.2 spec is supported, thus check for it. Also,
since device-side L2P is only supported in the 1.2 spec, make sure to
only check its value under 1.2.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Javier González
a294c19945 lightnvm: implement get log report chunk helpers
The 2.0 spec provides a report chunk log page that can be retrieved
using the stangard nvme get log page. This replaces the dedicated
get/put bad block table in 1.2.

This patch implements the helper functions to allow targets retrieve the
chunk metadata using get log page. It makes nvme_get_log_ext available
outside of nvme core so that we can use it form lightnvm.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Javier González
7100d50a7e lightnvm: make address conversions depend on generic device
On address conversions, use the generic device, instead of the target
device. This allows to use conversions outside of the target's realm.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Javier González
6947151374 lightnvm: add support for 2.0 address format
Add support for 2.0 address format. Also, align address bits for 1.2 and
2.0 to be able to operate on channel and luns without requiring a format
conversion. Use a generic address format for this purpose.

Also, convert the generic operations to the generic format in pblk.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Javier González
a40afad90b lightnvm: normalize geometry nomenclature
Normalize nomenclature for naming channels, luns, chunks, planes and
sectors as well as derivations in order to improve readability.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Javier González
3f48021bad lightnvm: complete geo structure with maxoc*
Complete the generic geometry structure with the maxoc and maxocpu
felds, present in the 2.0 spec. Also, expose them through sysfs.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Javier González
f1d4e8121f lightnvm: add shorten OCSSD version in geo
Create a shorten version to use in the generic geometry.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Javier González
3cb98f84d3 lightnvm: add minor version to generic geometry
Separate the version between major and minor on the generic geometry and
represent it through sysfs in the 2.0 path. The 1.2 path only shows the
major version to preserve the existing user space interface.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Javier González
e46f4e4822 lightnvm: simplify geometry structure
Currently, the device geometry is stored redundantly in the nvm_id and
nvm_geo structures at a device level. Moreover, when instantiating
targets on a specific number of LUNs, these structures are replicated
and manually modified to fit the instance channel and LUN partitioning.

Instead, create a generic geometry around nvm_geo, which can be used by
(i) the underlying device to describe the geometry of the whole device,
and (ii) instances to describe their geometry independently.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Javier González
43d4712721 lightnvm: pblk: refactor init/exit sequences
Refactor init and exit sequences to eliminate dependencies among init
modules and improve readability.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Heiner Litz
9d7aa4a484 lightnvm: Avoid validation of default op value
Fixes: 38401d231de65 ("lightnvm: set target over-provision on create ioctl")
Signed-off-by: Heiner Litz <hlitz@ucsc.edu>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Johannes Thumshirn
40f962d78a lightnvm: centralize permission check for lightnvm ioctl
Currently all functions for handling the lightnvm core ioctl commands
do a check for CAP_SYS_ADMIN.

Change this to fail early in nvm_ctl_ioctl(), so we don't have to
duplicate the permission checks all over.

Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Heiner Litz
a38c78d82d lightnvm: fix bad block initialization
fix reading bad block device information to correctly setup the per line
blk_bitmap during lightnvm initialization

Signed-off-by: Heiner Litz <hlitz@ucsc.edu>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Matias Bjørling
96257a8a7f nvme: lightnvm: add late setup of block size and metadata
The nvme driver sets up the size of the nvme namespace in two steps.
First it initializes the device with standard logical block and
metadata sizes, and then sets the correct logical block and metadata
size. Due to the OCSSD 2.0 specification relies on the namespace to
expose these sizes for correct initialization, let it be updated
appropriately on the LightNVM side as well.

Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Matias Bjørling
89a09c5643 lightnvm: remove nvm_dev_ops->max_phys_sect
The value of max_phys_sect is always static. Instead of
defining it in the nvm_dev_ops structure, declare it as a global
value.

Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Matias Bjørling
af569398c3 lightnvm: remove max_rq_size
The field is no longer used.

Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Matias Bjørling
62771fe0aa lightnvm: add 2.0 geometry identification
Implement the geometry data structures for 2.0 and enable a drive
to be identified as one, including exposing the appropriate 2.0
sysfs entries.

Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Matias Bjørling
c6ac3f35d4 lightnvm: flatten nvm_id_group into nvm_id
There are no groups in the 2.0 specification, make sure that the
nvm_id structure is flattened before 2.0 data structures are added.

Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Matias Bjørling
a04e0cf93a lightnvm: make 1.2 data structures explicit
Make the 1.2 data structures explicit, so it will be easy to identify
the 2.0 data structures. Also fix the order of which the nvme_nvm_*
are declared, such that they follow the nvme_nvm_command order.

Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Javier González
e411b33117 lightnvm: pblk: refactor bad block identification
In preparation for the OCSSD 2.0 spec. bad block identification,
refactor the current code to generalize bad block get/set functions and
structures.

Signed-off-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Hans Holmberg
3c05ef115c lightnvm: pblk: prevent race in pblk_rb_flush_point_set
Make sure that we are not advancing the sync pointer while
we're adding bios to the write buffer entry completion list.

This race condition results in bios not completing and was identified
by a hang when running xfstest generic/113.

Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Hans Holmberg
b966c50b14 lightnvm: pblk: allow allocation of new lines during shutdown
When shutting down pblk the write buffer is flushed and if the
current line can't fit the data in the write buffer we need
to allocate a new line, so remove the check that prevents this.

Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Hans Holmberg
7be970b225 lightnvm: pblk: delete writer kick timer before stopping thread
Unless we delete the timer that wakes up the write thread
before we stop the thread we risk re-starting the thread, so
delete the timer first.

Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Hans Holmberg
5d149bfabe lightnvm: pblk: add padding distribution sysfs attribute
When pblk receives a sync, all data up to that point in the write buffer
must be comitted to persistent storage, and as flash memory comes with a
minimal write size there is a significant cost involved both in terms
of time for completing the sync and in terms of write amplification
padded sectors for filling up to the minimal write size.

In order to get a better understanding of the costs involved for syncs,
Add a sysfs attribute to pblk: padded_dist, showing a normalized
distribution of sectors padded. In order to facilitate measurements of
specific workloads during the lifetime of the pblk instance, the
distribution can be reset by writing 0 to the attribute.

Do this by introducing counters for each possible padding:
{0..(minimal write size - 1)} and calculate the normalized distribution
when showing the attribute.

Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Javier González <javier@cnexlabs.com>
Rearranged total_buckets statement in pblk_sysfs_get_padding_dist
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Matias Bjørling
ff12581ec7 lightnvm: remove multiple groups in 1.2 data structure
Only one id group from the 1.2 specification is supported. Make
sure that only the first group is accessible.

Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00
Matias Bjørling
d8a39caee0 lightnvm: remove mlc pairs structure
The known implementations of the 1.2 specification, and upcoming 2.0
implementation all expose a sequential list of pages to write.
Remove the data structure, as it is no longer needed.

Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-03-29 17:29:09 -06:00