Commit graph

752,023 commits

Author SHA1 Message Date
Johan Hovold
20f2e1aa77 media: cpia2_usb: drop bogus interface-release call
Drop bogus call to usb_driver_release_interface() from the disconnect()
callback. As the interface is already being unbound at this point,
usb_driver_release_interface() simply returns early.

Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 12:12:04 -04:00
Philipp Zabel
b1e064c25e media: imx: add 8-bit grayscale support
The IPUv3 code has 8-bit grayscale capture support.
Enable imx-media to use it.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 12:10:24 -04:00
Jean-Michel Hautbois
be2068bf64 media: adv7604: Add support for i2c_new_secondary_device
The ADV7604 has thirteen 256-byte maps that can be accessed via the main
I2C ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.

Allow a device tree node to override the default addresses so that
address conflicts with other devices on the same bus may be resolved at
the board description level.

[Kieran: Re-adapted for mainline]

Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 12:09:58 -04:00
Jean-Michel Hautbois
9feb786876 media: dt-bindings: media: adv7604: Extend bindings to allow specifying slave map addresses
The ADV7604 has thirteen 256-byte maps that can be accessed via the main
I2C ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.

Extend the device tree node bindings to be able to override the default
addresses so that address conflicts with other devices on the same bus
may be resolved at the board description level.

[Kieran: Re-adapted for mainline]

Signed-off-by: Jean-Michel Hautbois <jean-michel.hautbois@vodalys.com>
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 12:09:24 -04:00
David S. Miller
3d27484eba Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2018-03-21

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Follow-up fix to the fault injection framework to prevent jump
   optimization on the kprobe by installing a dummy post-handler,
   from Masami.

2) Drop bpf_perf_prog_read_value helper from tracepoint type programs
   which was mistakenly added there and would otherwise crash due to
   wrong input context, from Yonghong.

3) Fix a crash in BPF fs when compiled with clang. Code appears to
   be fine just that clang tries to overly aggressive optimize in
   non C conform ways, therefore fix the kernel's Makefile to
   generally prevent such issues, from Daniel.

4) Skip unnecessary capability checks in bpf syscall, which is otherwise
   triggering unnecessary security hooks on capability checking and
   causing false alarms on unprivileged processes trying to access
   CAP_SYS_ADMIN restricted infra, from Chenbo.

5) Fix the test_bpf.ko module when CONFIG_BPF_JIT_ALWAYS_ON is set
   with regards to a test case that is really just supposed to fail
   on x8_64 JIT but not others, from Thadeu.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21 12:09:04 -04:00
Kieran Bingham
67537fe960 media: i2c: adv748x: Add support for i2c_new_secondary_device
The ADV748x has twelve 256-byte maps that can be accessed via the main
I2C ports. Each map has it own I2C address and acts as a standard slave
device on the I2C bus.

Allow a device tree node to override the default addresses so that
address conflicts with other devices on the same bus may be resolved at
the board description level.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 12:08:30 -04:00
Steven Rostedt (VMware)
6dd3791dcf ktest: Comment about other names than just ktest.conf
ktest.pl will read any file as long as its name is specified as the first
argument on the command line. Comment this fact in sample.conf.

Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-03-21 12:08:02 -04:00
David S. Miller
454bfe9783 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2018-03-21

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add a BPF hook for sendmsg and sendfile by reusing the ULP infrastructure
   and sockmap. Three helpers are added along with this, bpf_msg_apply_bytes(),
   bpf_msg_cork_bytes(), and bpf_msg_pull_data(). The first is used to tell
   for how many bytes the verdict should be applied to, the second to tell
   that x bytes need to be queued first to retrigger the BPF program for a
   verdict, and the third helper is mainly for the sendfile case to pull in
   data for making it private for reading and/or writing, from John.

2) Improve address to symbol resolution of user stack traces in BPF stackmap.
   Currently, the latter stores the address for each entry in the call trace,
   however to map these addresses to user space files, it is necessary to
   maintain the mapping from these virtual addresses to symbols in the binary
   which is not practical for system-wide profiling. Instead, this option for
   the stackmap rather stores the ELF build id and offset for the call trace
   entries, from Song.

3) Add support that allows BPF programs attached to perf events to read the
   address values recorded with the perf events. They are requested through
   PERF_SAMPLE_ADDR via perf_event_open(). Main motivation behind it is to
   support building memory or lock access profiling and tracing tools with
   the help of BPF, from Teng.

4) Several improvements to the tools/bpf/ Makefiles. The 'make bpf' in the
   tools directory does not provide the standard quiet output except for
   bpftool and it also does not respect specifying a build output directory.
   'make bpf_install' command neither respects specified destination nor
   prefix, all from Jiri. In addition, Jakub fixes several other minor issues
   in the Makefiles on top of that, e.g. fixing dependency paths, phony
   targets and more.

5) Various doc updates e.g. add a comment for BPF fs about reserved names
   to make the dentry lookup from there a bit more obvious, and a comment
   to the bpf_devel_QA file in order to explain the diff between native
   and bpf target clang usage with regards to pointer size, from Quentin
   and Daniel.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-21 12:08:01 -04:00
Kieran Bingham
71569850e3 media: i2c: adv748x: Add missing CBUS page
The ADV748x has 12 pages mapped onto I2C addresses.

In the existing implementation only 11 are mapped correctly in the page
enumerations, which causes an off-by-one fault on pages above the
infoframe definition due to a missing 'CBUS' page.

This causes the address for the CEC, SDP, TXA, and TXB to be incorrectly
programmed during the iterations in adv748x_initialise_clients().

Until now this has gone un-noticed due to the fact that following the
creation of the clients - the device is reset and the addresses are
reprogrammed in manually by the call to "adv748x_write_regs(state,
adv748x_set_slave_address);"

As part of moving to dynamic i2c address allocations repair this by
providing the missing CBUS page definition.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 12:07:02 -04:00
Kieran Bingham
06aa8f3aa9 media: i2c: adv748x: Simplify regmap configuration
The ADV748x has identical map configurations for each register map. The
duplication of each map can be simplified using a helper macro such that
each map is represented on a single line.

Define ADV748X_REGMAP_CONF for this purpose use it to create the tables.

Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 12:06:29 -04:00
Scott Wood
edbd0ede00 ktest: Clarify config file usage
Simply telling a new user to edit "the config file" without giving any
hints on where that file should go, what it should be named, or where
a template can be found, is not particularly helpful.

Link: http://lkml.kernel.org/r/20170717001630.10518-1-swood@redhat.com

Signed-off-by: Scott Wood <swood@redhat.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-03-21 12:06:25 -04:00
Hans Verkuil
3aab15af9a media: add tuner standby op, use where needed
The v4l2_subdev core s_power op was used for two different things: power on/off
sensors or video decoders/encoders and to put a tuner in standby (and only the
tuner!). There is no 'tuner wakeup' op, that's done automatically when the tuner
is accessed.

The danger with calling (s_power, 0) to put a tuner into standby is that it is
usually broadcast for all subdevs. So a video receiver subdev that supports
s_power will also be powered off, and since there is no corresponding (s_power, 1)
they will never be powered on again.

In addition, this is specifically meant for tuners only since they draw the most
current.

This patch adds a new tuner op called 'standby' and replaces all calls to
(core, s_power, 0) by (tuner, standby). This prevents confusion between the two
uses of s_power. Note that there is no overlap: bridge drivers either just want
to put the tuner into standby, or they deal with powering on/off sensors. Never
both.

This also makes it easier to replace s_power for the remaining bridge drivers
with some PM code later.

Whether we want something cleaner for tuners in the future is a separate topic.
There is a lot of legacy code surrounding tuners, and I am very hesitant about
making changes there.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 12:05:39 -04:00
Luca Ceresoli
3f97df91a1 media: vb2-core: vb2_ops: document non-interrupt-context calling
Driver writers can benefit in knowing if/when callbacks are called in
interrupt context. But it is not completely obvious here, so document
it.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 12:01:21 -04:00
Luca Ceresoli
68a06bd04e media: vb2-core: document the REQUEUEING state
VB2_BUF_STATE_REQUEUEING is accepted by vb2_buffer_done() but not
documented, so add it along with notes about calls in interrupt
context.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 12:01:01 -04:00
Luca Ceresoli
45ad39999b media: vb2-core: vb2_buffer_done: consolidate docs
Documentation about what start_streaming() should do on failure are
scattered in two places and mostly duplicated, so consolidate them in
one of the two places.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Pawel Osciak <pawel@osciak.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 12:00:31 -04:00
Douglas Fischer
dd328275e9 media: radio: Critical interrupt bugfix for si470x over i2c
Fixed si470x_start() disabling the interrupt signal, causing tune
operations to never complete. This does not affect USB radios
because they poll the registers instead of using the IRQ line.

Signed-off-by: Douglas Fischer <fischerdouglasc@gmail.com>
[hans.verkuil@cisco.com: fixed 80 column checkpatch warning]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 12:00:02 -04:00
Douglas Fischer
8c081b6f9a media: radio: Critical v4l2 registration bugfix for si470x over i2c
Added the call to v4l2_device_register() required to add a new radio device.
Without this patch, it is impossible for the driver to load. This does not
affect USB devices.

Signed-off-by: Douglas Fischer <fischerdouglasc@gmail.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:59:28 -04:00
Arnaldo Carvalho de Melo
425859ff0d perf annotate: No need to calculate notes->start twice
Since we already set notes->start to map__rip_2objdump(map, sym->start)
in symbol__annotate2(), no need to calculate that address again in
symbol__calc_lines(), just use notes->start.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ycxlg8mm5ueuj21w6gi62l7g@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21 12:53:43 -03:00
Arnaldo Carvalho de Melo
d9bd766584 perf annotate browser: Add 'P' hotkey to dump annotation to file
Just like we have in the histograms browser used as the main screen for
'perf top --tui' and 'perf report --tui', to print the current
annotation to a file with a named composed by the symbol name and the
".annotation" suffix.

Here is one example of pressing 'A' on 'perf top' to live annotate a
kernel function and then press 'P' to dump that annotation, the
resulting file:

  # cat _raw_spin_lock_irqsave.annotation
  _raw_spin_lock_irqsave() /proc/kcore
  Event: cycles:ppp

    7.14        nop
   21.43        push   %rbx
    7.14        pushfq
                pop    %rax
                nop
                mov    %rax,%rbx
                cli
                nop
                xor    %eax,%eax
                mov    $0x1,%edx
   64.29        lock   cmpxchg %edx,(%rdi)
                test   %eax,%eax
              ↓ jne    2b
                mov    %rbx,%rax
                pop    %rbx
              ← retq
          2b:   mov    %eax,%esi
              → callq  queued_spin_lock_slowpath
                mov    %rbx,%rax
                pop    %rbx
              ← retq
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-zzmnrwugb5vtk7bvg0rbx150@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21 12:53:43 -03:00
Arnaldo Carvalho de Melo
91340c5184 perf report: Introduce --ignore-vmlinux command line option
We've had this in 'perf top' for quite a while, useful if one wishes
to force using /proc/kcore to do annotation using the patched kernel
instead of the ELF image it started from, aka vmlinux.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-ircpvox4wzsv7gasrpb28fw9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21 12:53:42 -03:00
Arnaldo Carvalho de Melo
be316409e9 perf annotate: Introduce --ignore-vmlinux command line option
This is already present in 'perf top', albeit undocumented (will fix),
and is useful to use /proc/kcore instead of vmlinux and then get what is
really in place, not what the kernel starts with, before alternatives,
ftrace .text patching, etc, see the differences:

  # perf annotate --stdio2 _raw_spin_lock_irqsave
  _raw_spin_lock_irqsave() /lib/modules/4.16.0-rc4/build/vmlinux
  Event: anon group { cycles, instructions }

    0.00   3.17      → callq  __fentry__
    0.00   7.94        push   %rbx
    7.69  36.51      → callq  __page_file_index
                       mov    %rax,%rbx
    7.69   3.17      → callq  *ffffffff82225cd0
                       xor    %eax,%eax
                       mov    $0x1,%edx
   80.77  49.21        lock   cmpxchg %edx,(%rdi)
                       test   %eax,%eax
                     ↓ jne    2b
    3.85   0.00        mov    %rbx,%rax
                       pop    %rbx
                     ← retq
                 2b:   mov    %eax,%esi
                     → callq  queued_spin_lock_slowpath
                       mov    %rbx,%rax
                       pop    %rbx
                     ← retq
  [root@jouet ~]# perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave
  _raw_spin_lock_irqsave() /proc/kcore
  Event: anon group { cycles, instructions }

    0.00   3.17        nop
    0.00   7.94        push   %rbx
    0.00  23.81        pushfq
    7.69  12.70        pop    %rax
                       nop
                       mov    %rax,%rbx
    7.69   3.17        cli
                       nop
                       xor    %eax,%eax
                       mov    $0x1,%edx
   80.77  49.21        lock   cmpxchg %edx,(%rdi)
                       test   %eax,%eax
                     ↓ jne    2b
    3.85   0.00        mov    %rbx,%rax
                       pop    %rbx
                     ← retq
                 2b:   mov    %eax,%esi
                     → callq  *ffffffff820e96b0
                       mov    %rbx,%rax
                       pop    %rbx
                     ← retq
  #

Diff of the output of those commands:

  # perf annotate --stdio2 _raw_spin_lock_irqsave > /tmp/vmlinux
  # perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave > /tmp/kcore
  # diff -y /tmp/vmlinux /tmp/kcore
  _raw_spin_lock_irqsave() vmlinux             | _raw_spin_lock_irqsave() /proc/kcore
  Event: anon group { cycles, instructions }     Event: anon group { cycles, instructions }

   0.00  3.17  → callq __fentry__              |  0.00  3.17     nop
   0.00  7.94    push  %rbx                       0.00  7.94     push  %rbx
   7.69 36.51  → callq __page_file_index       |  0.00 23.81     pushfq
                                               >  7.69 12.70     pop   %rax
                                               >                 nop
                 mov   %rax,%rbx                                 mov   %rax,%rbx
   7.69  3.17  → callq *ffffffff82225cd0       |  7.69  3.17     cli
                                               >                 nop
                 xor   %eax,%eax                                 xor   %eax,%eax
                 mov   $0x1,%edx                                 mov   $0x1,%edx
  80.77 49.21    lock  cmpxchg %edx,(%rdi)       80.77 49.21     lock  cmpxchg %edx,(%rdi)
                 test  %eax,%eax                                 test  %eax,%eax
               ↓ jne   2b                                      ↓ jne   2b
   3.85  0.00    mov   %rbx,%rax                  3.85  0.00     mov   %rbx,%rax
                 pop   %rbx                                      pop   %rbx
               ← retq                                          ← retq
            2b:  mov   %eax,%esi                            2b:  mov   %eax,%esi
               → callq queued_spin_lock_slowpath|              → callq *ffffffff820e96b0
                 mov   %rbx,%rax                                 mov   %rbx,%rax
                 pop   %rbx                                      pop   %rbx
               ← retq                                          ← retq
  #

This should be further streamlined by doing both annotations and
allowing the TUI to toggle initial/current, and show the patched
instructions in a slightly different color.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-wz8d269hxkcwaczr0r4rhyjg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21 12:53:42 -03:00
Arnaldo Carvalho de Melo
864298f224 perf annotate: Add function header to --stdio2
# perf annotate --stdio2 _raw_spin_lock_irqsave
  _raw_spin_lock_irqsave() /lib/modules/4.16.0-rc4/build/vmlinux
  Event: anon group { cycles, instructions }

    0.00   3.17      → callq  __fentry__
    0.00   7.94        push   %rbx
    7.69  36.51      → callq  __page_file_index
                       mov    %rax,%rbx
    7.69   3.17      → callq  *ffffffff82225cd0
                       xor    %eax,%eax
                       mov    $0x1,%edx
   80.77  49.21        lock   cmpxchg %edx,(%rdi)
                       test   %eax,%eax
                     ↓ jne    2b
    3.85   0.00        mov    %rbx,%rax
                       pop    %rbx
                     ← retq
                 2b:   mov    %eax,%esi
                     → callq  queued_spin_lock_slowpath
                       mov    %rbx,%rax
                       pop    %rbx
                     ← retq
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-i86yfyzl8m194ioxgj1jo32f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21 12:53:41 -03:00
Arnaldo Carvalho de Melo
3563289208 perf annotate: Use the default annotation options for --stdio2
With an empty '[annotate]' section in ~/.perfconfig:

  # perf record -a --all-kernel -e '{cycles,instructions}:P' sleep 5
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 2.243 MB perf.data (5513 samples) ]
  # perf annotate --stdio2 _raw_spin_lock | head -20

                     Disassembly of section .text:

                     ffffffff81868790 <_raw_spin_lock>:
                     _raw_spin_lock():
                     EXPORT_SYMBOL(_raw_spin_trylock_bh);
                     #endif

                     #ifndef CONFIG_INLINE_SPIN_LOCK
                     void __lockfunc _raw_spin_lock(raw_spinlock_t *lock)
                     {
                     → callq  __fentry__
                     atomic_cmpxchg():
                             return xadd(&v->counter, -i);
                     }

                     static __always_inline int atomic_cmpxchg(atomic_t *v, int old, int new)
                     {
  # perf annotate --stdio2 _raw_spin_lock | head -20
                     → callq  __fentry__
                       xor    %eax,%eax
                       mov    $0x1,%edx
   87.50 100.00        lock   cmpxchg %edx,(%rdi)
    6.25   0.00        test   %eax,%eax
                     ↓ jne    16
    6.25   0.00        repz   retq
                 16:   mov    %eax,%esi
                     ↑ jmpq   ffffffff810e96b0 <queued_spin_lock_slowpath>
  #
  # cat ~/.perfconfig
  [annotate]

    hide_src_code = false
    show_linenr = true
  # perf annotate --stdio2 _raw_spin_lock | head -20

                 3   Disassembly of section .text:

                 5   ffffffff81868790 <_raw_spin_lock>:
                 6   _raw_spin_lock():
                 143 EXPORT_SYMBOL(_raw_spin_trylock_bh);
                 144 #endif

                 146 #ifndef CONFIG_INLINE_SPIN_LOCK
                 147 void __lockfunc _raw_spin_lock(raw_spinlock_t *lock)
                 148 {
                     → callq  __fentry__
                 150 atomic_cmpxchg():
                 187         return xadd(&v->counter, -i);
                 188 }

                 190 static __always_inline int atomic_cmpxchg(atomic_t *v, int old, int new)
                 191 {
  #
  # cat ~/.perfconfig
  [annotate]

    hide_src_code = true
    show_total_period = true
  # perf annotate --stdio2 _raw_spin_lock | head -20
                               → callq  __fentry__
                                 xor    %eax,%eax
                                 mov    $0x1,%edx
      1411316      152339        lock   cmpxchg %edx,(%rdi)
       344694           0        test   %eax,%eax
                               ↓ jne    16
        80806           0        repz   retq
                           16:   mov    %eax,%esi
                               ↑ jmpq   ffffffff810e96b0 <queued_spin_lock_slowpath>
  #

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-nu4rxg5zkdtgs1b2gc40p7v7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21 12:53:41 -03:00
Douglas Fischer
36d6bf8976 media: radio: Tuning bugfix for si470x over i2c
Fixed si470x_set_channel() trying to tune before chip is turned
on, which causes warnings in dmesg and when probing, makes driver
wait for 3s for tuning timeout. This issue did not affect USB
devices because they have a different probing sequence.

Signed-off-by: Douglas Fischer <fischerdouglasc@gmail.com>
[hans.verkuil@cisco.com: fixed space-after-( checkpatch warning]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:53:40 -04:00
Arnaldo Carvalho de Melo
7f0b6fde31 perf annotate: Move the default annotate options to the library
One more thing that goes from the TUI code to be used more widely,
for instance it'll affect the default options used by:

  perf annotate --stdio2

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-0nsz0dm0akdbo30vgja2a10e@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21 12:53:40 -03:00
Arnaldo Carvalho de Melo
befd2a38a6 perf annotate: Introduce the --stdio2 output mode
This uses the TUI augmented formatting routines, modulo interactivity.

  # perf annotate --ignore-vmlinux --stdio2 _raw_spin_lock_irqsave
  _raw_spin_lock_irqsave() /proc/kcore
  Event: cycles:ppp

  Percent

              Disassembly of section load0:

              ffffffff9a8734b0 <load0>:
                nop
                push   %rbx
   50.00        pushfq
                pop    %rax
                nop
                mov    %rax,%rbx
                cli
                nop
                xor    %eax,%eax
                mov    $0x1,%edx
   50.00        lock   cmpxchg %edx,(%rdi)
                test   %eax,%eax
              ↓ jne    2b
                mov    %rbx,%rax
                pop    %rbx
              ← retq
          2b:   mov    %eax,%esi
              → callq  queued_spin_lock_slowpath
                mov    %rbx,%rax
                pop    %rbx
              ← retq

Tested-by: Jin Yao <yao.jin@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-6cte5o8z84mbivbvqlg14uh1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-21 12:53:26 -03:00
Hugues Fruchet
3e187c81d4 media: stm32-dcmi: add JPEG support
Add DCMI JPEG support.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:53:09 -04:00
Hugues Fruchet
b4ee319480 media: stm32-dcmi: fix unnecessary parentheses
Fix unnecessary parentheses in if conditions.
Detected by checkpatch.pl --strict.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:52:12 -04:00
Hugues Fruchet
a1029f552c media: stm32-dcmi: rework overrun/error case
Do not stop/restart dma on overrun or errors.
Dma will be restarted on current frame transfer
completion. Frame transfer completion is ensured
even if overrun or error occurs by DCMI continuous
capture mode which restarts data transfer at next
frame sync.
Do no warn on overrun while in irq thread, this slows down
system and lead to more overrun errors. Use a counter
instead and log errors at stop streaming.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:51:49 -04:00
Hugues Fruchet
f8c5363db3 media: stm32-dcmi: fix lock scheme
Fix lock scheme leading to spurious freeze.

Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:51:06 -04:00
Aishwarya Pant
aebb47d4e7 Input: trackpoint: document sysfs interface
Descriptions have been collected from git commit logs, code commits and
the TrackPoint System Version 4.0 Engineering Specification.

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-21 09:35:01 -06:00
Masanari Iida
a10c5d91c3 xfs: Change URL for the project in xfs.txt
The oss.sgi.com doesn't exist any more.
Change it to current project URL, https://xfs.wiki.kernel.org/

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-21 09:33:04 -06:00
Richard Guy Briggs
ea841bafda audit: add refused symlink to audit_names
Audit link denied events for symlinks had duplicate PATH records rather
than just updating the existing PATH record.  Update the symlink's PATH
record with the current dentry and inode information.

See: https://github.com/linux-audit/audit-kernel/issues/21

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-03-21 11:31:03 -04:00
Aishwarya Pant
2ddf0d6559 char/bsr: add sysfs interface documentation
Descriptions have collected from code comments and by reading through
code.

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-21 09:26:07 -06:00
Aishwarya Pant
014d8fd880 acpi: nfit: document sysfs interface
This is an attempt to document the nfit sysfs interface. The
descriptions have been collected from git commit logs and the ACPI
specification 6.2.

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-21 09:23:31 -06:00
Sakari Ailus
3c91d24fcd media: v4l: common: Remove v4l2_find_nearest_format
v4l2_find_nearest_format is not useful for drivers in finding the best
matching format as it assumes a V4L2 specific struct. Drivers will use
v4l2_find_nearest_size instead.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:21:33 -04:00
Sakari Ailus
ac53212880 media: vivid: Use v4l2_find_nearest_size
Use v4l2_find_nearest_size instead of a driver specific function to find
nearest matching size.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:20:56 -04:00
Aishwarya Pant
bd15134a73 block: rbd: update sysfs interface
The existing sysfs interface has been updated to be in the same format
as described in Documentation/ABI/README. This will be useful for
scripting and tracking changes in the ABI. Attributes have been grouped
by functionality and/or the date on which they were added.

There are a couple of more changes:
- The attributes have been annotated with file permissions RO/RW/WO.
- Added description of the bus attribute supported_features

Signed-off-by: Aishwarya Pant <aishpant@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-21 09:20:40 -06:00
Sakari Ailus
894de53b49 media: ov5670: Use v4l2_find_nearest_size
Use v4l2_find_nearest_size instead of a driver specific function to find
nearest matching size.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:20:24 -04:00
Sakari Ailus
227b183dcb media: ov13858: Use v4l2_find_nearest_size
Use v4l2_find_nearest_size instead of a driver specific function to find
nearest matching size.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:19:56 -04:00
Sakari Ailus
95ce9c2860 media: v4l: common: Add a function to obtain best size from a list
Add a function (as well as a helper macro) to obtain the best size in a
list of device specific sizes. This helps writing drivers as well as
aligns interface behaviour across drivers.

The struct in which this information is contained in is typically specific
to the driver, therefore the existing function v4l2_find_nearest_format()
does not address the need.

Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:18:52 -04:00
Eric Engestrom
3b7ea9f015 Documentation/sparse: fix typo
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-21 09:17:56 -06:00
Richard Guy Briggs
94b9d9b7a1 audit: remove path param from link denied function
In commit 45b578fe4c
("audit: link denied should not directly generate PATH record")
the need for the struct path *link parameter was removed.
Remove the now useless struct path argument.

Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-03-21 11:17:41 -04:00
Gary R Hook
1dbba2cf30 Documentation/CodingStyle: Add an example for braces
Add another example of required braces when using a compound statement in
a loop.

Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-21 09:17:09 -06:00
Tony Lindgren
eb85a355c3 ARM: OMAP: Fix SRAM W+X mapping
We are still using custom SRAM code for some SoCs and are not marking
the PM code mapped to SRAM as read-only and executable after we're
done. With CONFIG_DEBUG_WX=y, we will get "Found insecure W+X mapping
at address" warning.

Let's fix this issue the same way as commit 728bbe75c8 ("misc: sram:
Introduce support code for protect-exec sram type") is doing for
drivers/misc/sram-exec.c.

On omap3, we need to restore SRAM when returning from off mode after
idle, so init time configuration is not enough.

And as we no longer have users for omap_sram_push_address() we can
make it static while at it.

Note that eventually we should be using sram-exec.c for all SoCs.

Cc: stable@vger.kernel.org	# v4.12+
Cc: Dave Gerlach <d-gerlach@ti.com>
Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2018-03-21 08:16:29 -07:00
Sean Young
2525fdcb6e media: imon: rename protocol from other to imon
This renames the protocol for the imon rc driver from other to imon,
since it is now an known protocol. Although different name will show up
in the sysfs protocol file, loading a keymap using existing ir-keytable
versions still works.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:13:15 -04:00
Sean Young
447dcc0cf1 media: rc: add new imon protocol decoder and encoder
This makes it possible to use the various iMON remotes with any raw IR
RC device.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:12:29 -04:00
Sean Young
8d4068810d media: rc: oops in ir_timer_keyup after device unplug
If there is IR in the raw kfifo when ir_raw_event_unregister() is called,
then kthread_stop() causes ir_raw_event_thread to be scheduled, decode
some scancodes and re-arm timer_keyup. The timer_keyup then fires when
the rc device is long gone.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:11:26 -04:00
Sean Young
8a4e8f8dfc media: rc: new driver for early iMon device
These devices were supported by the lirc_imon.c driver which was removed
from staging in commit f41003a23a ("[media] staging: lirc_imon: port
remaining usb ids to imon and remove").

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2018-03-21 11:11:04 -04:00
Mike Rapoport
5a5d1a7708 docs/vm: update 00-INDEX
Several files were added to Documentation/vm without updates to 00-INDEX.
Fill in the missing documents

Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2018-03-21 09:10:23 -06:00