The nf_osf_ttl() function accessed skb->dev to perform a local interface
address lookup without verifying that the device pointer was valid.
Additionally, the implementation utilized an in_dev_for_each_ifa_rcu
loop to match the packet source address against local interface
addresses. It assumed that packets from the same subnet should not see a
decrement on the initial TTL. A packet might appear it is from the same
subnet but it actually isn't especially in modern environments with
containers and virtual switching.
Remove the device dereference and interface loop. Replace the logic with
a switch statement that evaluates the TTL according to the ttl_check.
Fixes: 11eeef41d5 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Kito Xu (veritas501) <hxzene@gmail.com>
Closes: https://lore.kernel.org/netfilter-devel/20260414074556.2512750-1-hxzene@gmail.com/
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In nf_osf_match(), the nf_osf_hdr_ctx structure is initialized once
and passed by reference to nf_osf_match_one() for each fingerprint
checked. During TCP option parsing, nf_osf_match_one() advances the
shared ctx->optp pointer.
If a fingerprint perfectly matches, the function returns early without
restoring ctx->optp to its initial state. If the user has configured
NF_OSF_LOGLEVEL_ALL, the loop continues to the next fingerprint.
However, because ctx->optp was not restored, the next call to
nf_osf_match_one() starts parsing from the end of the options buffer.
This causes subsequent matches to read garbage data and fail
immediately, making it impossible to log more than one match or logging
incorrect matches.
Instead of using a shared ctx->optp pointer, pass the context as a
constant pointer and use a local pointer (optp) for TCP option
traversal. This makes nf_osf_match_one() strictly stateless from the
caller's perspective, ensuring every fingerprint check starts at the
correct option offset.
Fixes: 1a6a0951fc ("netfilter: nfnetlink_osf: add missing fmatch check")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently, IPVS skips MTU checks for GSO packets by excluding them with
the !skb_is_gso(skb) condition. This creates problems when IPVS tunnel
mode encapsulates GSO packets with IPIP headers.
The issue manifests in two ways:
1. MTU violation after encapsulation:
When a GSO packet passes through IPVS tunnel mode, the original MTU
check is bypassed. After adding the IPIP tunnel header, the packet
size may exceed the outgoing interface MTU, leading to unexpected
fragmentation at the IP layer.
2. Fragmentation with problematic IP IDs:
When net.ipv4.vs.pmtu_disc=1 and a GSO packet with multiple segments
is fragmented after encapsulation, each segment gets a sequentially
incremented IP ID (0, 1, 2, ...). This happens because:
a) The GSO packet bypasses MTU check and gets encapsulated
b) At __ip_finish_output, the oversized GSO packet is split into
separate SKBs (one per segment), with IP IDs incrementing
c) Each SKB is then fragmented again based on the actual MTU
This sequential IP ID allocation differs from the expected behavior
and can cause issues with fragment reassembly and packet tracking.
Fix this by properly validating GSO packets using
skb_gso_validate_network_len(). This function correctly validates
whether the GSO segments will fit within the MTU after segmentation. If
validation fails, send an ICMP Fragmentation Needed message to enable
proper PMTU discovery.
Fixes: 4cdd34084d ("netfilter: nf_conntrack_ipv6: improve fragmentation handling")
Signed-off-by: Yingnan Zhang <342144303@qq.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Florian Westphal says:
"Historically this is not an issue, even for normal base hooks: the data
path doesn't use the original nf_hook_ops that are used to register the
callbacks.
However, in v5.14 I added the ability to dump the active netfilter
hooks from userspace.
This code will peek back into the nf_hook_ops that are available
at the tail of the pointer-array blob used by the datapath.
The nat hooks are special, because they are called indirectly from
the central nat dispatcher hook. They are currently invisible to
the nfnl hook dump subsystem though.
But once that changes the nat ops structures have to be deferred too."
Update nf_nat_register_fn() to deal with partial exposition of the hooks
from error path which can be also an issue for nfnetlink_hook.
Fixes: e2cf17d377 ("netfilter: add new hook nfnl subsystem")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is a partial revert of:
commit ab4f21e6fb ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions")
to allow ipv4 and ipv6 only.
- xt_mac
- xt_owner
- xt_physdev
These extensions are not used by ebtables in userspace.
Moreover, xt_realm is only for ipv4, since dst->tclassid is ipv4
specific.
Fixes: ab4f21e6fb ("netfilter: xtables: use NFPROTO_UNSPEC in more extensions")
Reported-by: "Kito Xu (veritas501)" <hxzene@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Replace it with scnprintf, the buffer sizes are expected to be large enough
to hold the result, no need for snprintf+overflow check.
Increase buffer size in mangle_content_len() while at it.
BUG: KASAN: stack-out-of-bounds in vsnprintf+0xea5/0x1270
Write of size 1 at addr [..]
vsnprintf+0xea5/0x1270
sprintf+0xb1/0xe0
mangle_content_len+0x1ac/0x280
nf_nat_sdp_session+0x1cc/0x240
process_sdp+0x8f8/0xb80
process_invite_request+0x108/0x2b0
process_sip_msg+0x5da/0xf50
sip_help_tcp+0x45e/0x780
nf_confirm+0x34d/0x990
[..]
Fixes: 9fafcd7b20 ("[NETFILTER]: nf_conntrack/nf_nat: add SIP helper port")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_osf_match_one() computes ctx->window % f->wss.val in the
OSF_WSS_MODULO branch with no guard for f->wss.val == 0. A
CAP_NET_ADMIN user can add such a fingerprint via nfnetlink; a
subsequent matching TCP SYN divides by zero and panics the kernel.
Reject the bogus fingerprint in nfnl_osf_add_callback() above the
per-option for-loop. f->wss is per-fingerprint, not per-option, so
the check must run regardless of f->opt_num (including 0). Also
reject wss.wc >= OSF_WSS_MAX; nf_osf_match_one() already treats that
as "should not happen".
Crash:
Oops: divide error: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
<IRQ>
nf_osf_match (net/netfilter/nfnetlink_osf.c:220)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:348)
nf_hook_slow (net/netfilter/core.c:622)
ip_local_deliver (net/ipv4/ip_input.c:265)
ip_rcv (include/linux/skbuff.h:1162)
__netif_receive_skb_one_core (net/core/dev.c:6181)
process_backlog (net/core/dev.c:6642)
__napi_poll (net/core/dev.c:7710)
net_rx_action (net/core/dev.c:7945)
handle_softirqs (kernel/softirq.c:622)
Fixes: 11eeef41d5 ("netfilter: passive OS fingerprint xtables match")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Suggested-by: Florian Westphal <fw@strlen.de>
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This expression only supports for ipv4, restrict it.
Fixes: b96af92d6e ("netfilter: nf_tables: implement Passive OS fingerprint module in nft_osf")
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
`ip6t_eui64`, `xt_mac`, the `bitmap:ip,mac`, `hash:ip,mac`, and
`hash:mac` ipset types, and `nf_log_syslog` access `eth_hdr(skb)`
after either assuming that the skb is associated with an Ethernet
device or checking only that the `ETH_HLEN` bytes at
`skb_mac_header(skb)` lie between `skb->head` and `skb->data`.
Make these paths first verify that the skb is associated with an
Ethernet device, that the MAC header was set, and that it spans at
least a full Ethernet header before accessing `eth_hdr(skb)`.
Suggested-by: Florian Westphal <fw@strlen.de>
Tested-by: Ren Wei <enjou1224z@gmail.com>
Signed-off-by: Zhengchuan Liang <zcliangcn@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
Drop packets if their ttl/hl is too small for forwarding.
Fixes: d32de98ea7 ("netfilter: nft_fwd_netdev: allow to forward packets via neighbour layer")
Signed-off-by: Florian Westphal <fw@strlen.de>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Use the TRAILING_OVERLAP() helper to fix the following warnings:
1 net/netfilter/x_tables.c:816:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
1 net/netfilter/x_tables.c:811:39: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
This helper creates a union between a flexible-array member (FAM)
and a set of members that would otherwise follow it. This overlays
the trailing members onto the FAM while preserving the original
memory layout.
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
UDP-Lite (RFC 3828) socket support was recently retired from the core
networking stack. As a follow-up of that, drop the connection tracker
and NAT support for UDP-Lite in Netfilter.
This patch removes CONFIG_NF_CT_PROTO_UDPLITE and scrubs UDP-Lite
awareness from the conntrack core, NAT core, nft_ct, and ctnetlink.
Please note that stateless packet inspection, matching, ipsets or
logging support for IPPROTO_UDPLITE is preserved.
As conntrack no longer extracts UDP-Lite ports or tracks its L4 state,
when performing NAT the UDP-Lite checksum cannot be updated anymore.
That is an expected and acceptable consequence of removing UDP-Lite
conntrack module.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Originally this did not matter because defrag was enabled once per netns
and only disabled again on netns dismantle. When this got changed I should
have adjusted checkentry to not leave defrag enabled on error.
Fixes: de8c12110a ("netfilter: disable defrag once its no longer needed")
Signed-off-by: Florian Westphal <fw@strlen.de>
Add pr_fmt to prefix log messages with the module name for
easier debugging in dmesg.
Add checkentry functions for IPv4 (ttl_mt_check) and IPv6
(hl_mt6_check) to validate the match mode at rule registration
time, rejecting invalid modes with -EINVAL.
The evaluation function returns false in case the mode is
unknown, so this is a cleanup, not a bug fix.
Signed-off-by: Marino Dzalto <marino.dzalto@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reject names that lack a \0 character and reject the empty string as
well. iptables allows this but it fails to re-parse iptables-save output
that contain such rules.
Signed-off-by: Florian Westphal <fw@strlen.de>
Allow the default load factor for the connection and service tables
to be configured.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Add /proc/net/ip_vs_status to show current state of IPVS.
The motivation for this new /proc interface is to provide the output
for the users to help them decide when to tune the load factor for
hash tables, which is possible with the new sysctl knobs coming in
followup patch.
The output also includes information for the kthreads used for stats.
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
As conn_tab is per-net, better to show the current hash table size
to users instead of the ip_vs_conn_tab_size (max).
Signed-off-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Sharing a global hash table among all queues is tempting, but
it can cause crash:
BUG: KASAN: slab-use-after-free in nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
[..]
nfqnl_recv_verdict+0x11ac/0x15e0 [nfnetlink_queue]
nfnetlink_rcv_msg+0x46a/0x930
kmem_cache_alloc_node_noprof+0x11e/0x450
struct nf_queue_entry is freed via kfree, but parallel cpu can still
encounter such an nf_queue_entry when walking the list.
Alternative fix is to free the nf_queue_entry via kfree_rcu() instead,
but as we have to alloc/free for each skb this will cause more mem
pressure.
Cc: Scott Mitchell <scott.k.mitch1@gmail.com>
Fixes: e19079adcd ("netfilter: nfnetlink_queue: optimize verdict lookup with hash table")
Signed-off-by: Florian Westphal <fw@strlen.de>
nft_ct_timeout_obj_destroy() frees the timeout object with kfree()
immediately after nf_ct_untimeout(), without waiting for an RCU grace
period. Concurrent packet processing on other CPUs may still hold
RCU-protected references to the timeout object obtained via
rcu_dereference() in nf_ct_timeout_data().
Add an rcu_head to struct nf_ct_timeout and use kfree_rcu() to defer
freeing until after an RCU grace period, matching the approach already
used in nfnetlink_cttimeout.c.
KASAN report:
BUG: KASAN: slab-use-after-free in nf_conntrack_tcp_packet+0x1381/0x29d0
Read of size 4 at addr ffff8881035fe19c by task exploit/80
Call Trace:
nf_conntrack_tcp_packet+0x1381/0x29d0
nf_conntrack_in+0x612/0x8b0
nf_hook_slow+0x70/0x100
__ip_local_out+0x1b2/0x210
tcp_sendmsg_locked+0x722/0x1580
__sys_sendto+0x2d8/0x320
Allocated by task 75:
nft_ct_timeout_obj_init+0xf6/0x290
nft_obj_init+0x107/0x1b0
nf_tables_newobj+0x680/0x9c0
nfnetlink_rcv_batch+0xc29/0xe00
Freed by task 26:
nft_obj_destroy+0x3f/0xa0
nf_tables_trans_destroy_work+0x51c/0x5c0
process_one_work+0x2c4/0x5a0
Fixes: 7e0b2b57f0 ("netfilter: nft_ct: add ct timeout support")
Cc: stable@vger.kernel.org
Signed-off-by: Tuan Do <tuan@calif.io>
Signed-off-by: Florian Westphal <fw@strlen.de>
ports_match_v1() treats any non-zero pflags entry as the start of a
port range and unconditionally consumes the next ports[] element as
the range end.
The checkentry path currently validates protocol, flags and count, but
it does not validate the range encoding itself. As a result, malformed
rules can mark the last slot as a range start or place two range starts
back to back, leaving ports_match_v1() to step past the last valid
ports[] element while interpreting the rule.
Reject malformed multiport v1 rules in checkentry by validating that
each range start has a following element and that the following element
is not itself marked as another range start.
Fixes: a89ecb6a2e ("[NETFILTER]: x_tables: unify IPv4/IPv6 multiport match")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Tested-by: Yuhang Zheng <z1652074432@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Signed-off-by: Florian Westphal <fw@strlen.de>
When batching multiple NFLOG messages (inst->qlen > 1), __nfulnl_send()
appends an NLMSG_DONE terminator with sizeof(struct nfgenmsg) payload via
nlmsg_put(), but never initializes the nfgenmsg bytes. The nlmsg_put()
helper only zeroes alignment padding after the payload, not the payload
itself, so four bytes of stale kernel heap data are leaked to userspace
in the NLMSG_DONE message body.
Use nfnl_msg_put() to build the NLMSG_DONE terminator, which initializes
the nfgenmsg payload via nfnl_fill_hdr(), consistent with how
__build_packet_message() already constructs NFULNL_MSG_PACKET headers.
Fixes: 29c5d4afba ("[NETFILTER]: nfnetlink_log: fix sending of multipart messages")
Reported-by: Weiming Shi <bestswngs@gmail.com>
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Florian Westphal <fw@strlen.de>
When ip_vs_bind_scheduler() succeeds in ip_vs_add_service(), the local
variable sched is set to NULL. If ip_vs_start_estimator() subsequently
fails, the out_err cleanup calls ip_vs_unbind_scheduler(svc, sched)
with sched == NULL. ip_vs_unbind_scheduler() passes the cur_sched NULL
check (because svc->scheduler was set by the successful bind) but then
dereferences the NULL sched parameter at sched->done_service, causing a
kernel panic at offset 0x30 from NULL.
Oops: general protection fault, [..] [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037]
RIP: 0010:ip_vs_unbind_scheduler (net/netfilter/ipvs/ip_vs_sched.c:69)
Call Trace:
<TASK>
ip_vs_add_service.isra.0 (net/netfilter/ipvs/ip_vs_ctl.c:1500)
do_ip_vs_set_ctl (net/netfilter/ipvs/ip_vs_ctl.c:2809)
nf_setsockopt (net/netfilter/nf_sockopt.c:102)
[..]
Fix by simply not clearing the local sched variable after a successful
bind. ip_vs_unbind_scheduler() already detects whether a scheduler is
installed via svc->scheduler, and keeping sched non-NULL ensures the
error path passes the correct pointer to both ip_vs_unbind_scheduler()
and ip_vs_scheduler_put().
While the bug is older, the problem popups in more recent kernels (6.2),
when the new error path is taken after the ip_vs_start_estimator() call.
Fixes: 705dd34440 ("ipvs: use kthreads for stats estimation")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Acked-by: Simon Horman <horms@kernel.org>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Florian Westphal <fw@strlen.de>
Add a new helper function to retrieve the next action entry in flow
rule, check if the maximum number of actions is reached, bail out in
such case.
Replace existing opencoded iteration on the action array by this
helper function.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
The trace lines are indented using PRINT("%*.s", xx, " ").
Userspace will treat this as "%*.0s" and will output no characters
when 'xx' is zero, the kernel treats it as "%*s" and will output
a single ' ' - which is probably what is intended.
Change all the formats to "%*s" removing the default precision.
This gives a single space indent when level is zero.
Signed-off-by: David Laight <david.laight.linux@gmail.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Currently:
add rule netdev x y ip saddr 1.1.1.1
does not work with neither double-tagged vlan nor pppoe packets. This is
because the network and transport header offset are not pointing to the
IP and transport protocol headers in the stack.
This patch expands NFT_META_PROTOCOL and NFT_META_L4PROTO to parse
double-tagged vlan and pppoe packets so matching network and transport
header fields becomes possible with the existing userspace generated
bytecode. Note that this parser only supports double-tagged vlan which
is composed of vlan offload + vlan header in the skb payload area for
simplicity.
NFT_META_PROTOCOL is used by bridge and netdev family as an implicit
dependency in the bytecode to match on network header fields.
Similarly, there is also NFT_META_L4PROTO, which is also used as an
implicit dependency when matching on the transport protocol header
fields.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Florian Westphal <fw@strlen.de>
nft_pipapo_avx2_lookup_slow will never be used in reality, because the
common sizes are handled by avx2 optimized versions.
However, nft_pipapo_avx2_lookup_slow loops over the data just like the
avx2 functions. However, _slow doesn't need to do that.
As-is, first loop sets all the right result bits and the next iterations
boil down to 'x = x & x'. Remove the loop.
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Since commit e807b13cb3 ("nft_set_pipapo: Generalise group size for buckets")
there is no longer a need to increment the data pointer in two steps.
Switch to a single invocation of NFT_PIPAPO_GROUPS_PADDED_SIZE() helper,
like the avx2 implementation.
[ Stefano: Improve commit message ]
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Should have no effect in practice; all of these use the
nft_parse_register_load/store apis which is mandatory anyway due
to the need to further validate the register load/store, e.g.
that the size argument doesn't result in out-of-bounds load/store.
OTOH this is a simple method to reject obviously wrong input
at earlier stage.
Signed-off-by: Florian Westphal <fw@strlen.de>
These spots either already check the attribute range manually
before use or the consuming functions tolerate unexpected values.
Nevertheless, add more range checks via netlink policy so we gain
more users and avoid possible re-use in other places that might
not have the required manual checks. This also improves error
reporting: netlink core can generate extack errors.
Signed-off-by: Florian Westphal <fw@strlen.de>
The debug code (not enabled in any build) reads up to 6 octets of
the inpt buffer, but does so without bound checks. Zap this.
Signed-off-by: Florian Westphal <fw@strlen.de>
net is already set, derived from nf_conn.
I don't see how the device could be living in a different netns
than the conntrack entry.
Remove the extra variable and re-use existing one.
Signed-off-by: Florian Westphal <fw@strlen.de>
After commit 07919126ec ("netfilter: annotate NAT helper hook pointers
with __rcu"), sparse can warn about type/address-space mismatches when
RCU-dereferencing NAT helper hook function pointers.
The hooks are __rcu-annotated and accessed via rcu_dereference(), but the
combination of complex function pointer declarators and the WRITE_ONCE()
machinery used by RCU_INIT_POINTER()/rcu_assign_pointer() can confuse
sparse and trigger false positives.
Introduce typedefs for the NAT helper function types, so __rcu applies to
a simple "fn_t __rcu *" pointer form. Also replace local typeof(hook)
variables with "fn_t *" to avoid propagating __rcu address space into
temporaries.
No functional change intended.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603022359.3dGE9fwI-lkp@intel.com/
Signed-off-by: Sun Jian <sun.jian.kdev@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
nft_queue is always used from userspace nftables to deliver the NF_QUEUE
verdict. Immediately emitting an NF_QUEUE verdict is never used by the
userspace nft tools, so reject immediate NF_QUEUE verdicts.
The arp family does not provide queue support, but such an immediate
verdict is still reachable. Globally reject NF_QUEUE immediate verdicts
to address this issue.
Fixes: f342de4e2f ("netfilter: nf_tables: reject QUEUE/DROP verdict parameters")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Weiming Shi says:
xt_match and xt_target structs registered with NFPROTO_UNSPEC can be
loaded by any protocol family through nft_compat. When such a
match/target sets .hooks to restrict which hooks it may run on, the
bitmask uses NF_INET_* constants. This is only correct for families
whose hook layout matches NF_INET_*: IPv4, IPv6, INET, and bridge
all share the same five hooks (PRE_ROUTING ... POST_ROUTING).
ARP only has three hooks (IN=0, OUT=1, FORWARD=2) with different
semantics. Because NF_ARP_OUT == 1 == NF_INET_LOCAL_IN, the .hooks
validation silently passes for the wrong reasons, allowing matches to
run on ARP chains where the hook assumptions (e.g. state->in being
set on input hooks) do not hold. This leads to NULL pointer
dereferences; xt_devgroup is one concrete example:
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000044: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
RIP: 0010:devgroup_mt+0xff/0x350
Call Trace:
<TASK>
nft_match_eval (net/netfilter/nft_compat.c:407)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_arp (net/netfilter/nft_chain_filter.c:61)
nf_hook_slow (net/netfilter/core.c:623)
arp_xmit (net/ipv4/arp.c:666)
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Fix it by restricting arptables to NFPROTO_ARP extensions only.
Note that arptables-legacy only supports:
- arpt_CLASSIFY
- arpt_mangle
- arpt_MARK
that provide explicit NFPROTO_ARP match/target declarations.
Fixes: 9291747f11 ("netfilter: xtables: add device group match")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
mtype_del() counts empty slots below n->pos in k, but it only drops the
bucket when both n->pos and k are zero. This misses buckets whose live
entries have all been removed while n->pos still points past deleted slots.
Treat a bucket as empty when all positions below n->pos are unused and
release it directly instead of shrinking it further.
Fixes: 8af1c6fbd9 ("netfilter: ipset: Fix forceadd evaluation path")
Cc: stable@vger.kernel.org
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <dstsmallbird@foxmail.com>
Signed-off-by: Yifan Wu <yifanwucs@gmail.com>
Co-developed-by: Yuan Tan <yuantan098@gmail.com>
Signed-off-by: Yuan Tan <yuantan098@gmail.com>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Use the existing master conntrack helper, anything else is not really
supported and it just makes validation more complicated, so just ignore
what helper userspace suggests for this expectation.
This was uncovered when validating CTA_EXPECT_CLASS via different helper
provided by userspace than the existing master conntrack helper:
BUG: KASAN: slab-out-of-bounds in nf_ct_expect_related_report+0x2479/0x27c0
Read of size 4 at addr ffff8880043fe408 by task poc/102
Call Trace:
nf_ct_expect_related_report+0x2479/0x27c0
ctnetlink_create_expect+0x22b/0x3b0
ctnetlink_new_expect+0x4bd/0x5c0
nfnetlink_rcv_msg+0x67a/0x950
netlink_rcv_skb+0x120/0x350
Allowing to read kernel memory bytes off the expectation boundary.
CTA_EXPECT_HELP_NAME is still used to offer the helper name to userspace
via netlink dump.
Fixes: bd07793705 ("netfilter: nfnetlink_queue: allow to attach expectations to conntracks")
Reported-by: Qi Tang <tpluszz77@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
ctnetlink_alloc_expect() allocates expectations from a non-zeroing
slab cache via nf_ct_expect_alloc(). When CTA_EXPECT_NAT is not
present in the netlink message, saved_addr and saved_proto are
never initialized. Stale data from a previous slab occupant can
then be dumped to userspace by ctnetlink_exp_dump_expect(), which
checks these fields to decide whether to emit CTA_EXPECT_NAT.
The safe sibling nf_ct_expect_init(), used by the packet path,
explicitly zeroes these fields.
Zero saved_addr, saved_proto and dir in the else branch, guarded
by IS_ENABLED(CONFIG_NF_NAT) since these fields only exist when
NAT is enabled.
Confirmed by priming the expect slab with NAT-bearing expectations,
freeing them, creating a new expectation without CTA_EXPECT_NAT,
and observing that the ctnetlink dump emits a spurious
CTA_EXPECT_NAT containing stale data from the prior allocation.
Fixes: 076a0ca026 ("netfilter: ctnetlink: add NAT support for expectations")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_conntrack_helper_unregister() calls nf_ct_expect_iterate_destroy()
to remove expectations belonging to the helper being unregistered.
However, it passes NULL instead of the helper pointer as the data
argument, so expect_iter_me() never matches any expectation and all
of them survive the cleanup.
After unregister returns, nfnl_cthelper_del() frees the helper
object immediately. Subsequent expectation dumps or packet-driven
init_conntrack() calls then dereference the freed exp->helper,
causing a use-after-free.
Pass the actual helper pointer so expectations referencing it are
properly destroyed before the helper object is freed.
BUG: KASAN: slab-use-after-free in string+0x38f/0x430
Read of size 1 at addr ffff888003b14d20 by task poc/103
Call Trace:
string+0x38f/0x430
vsnprintf+0x3cc/0x1170
seq_printf+0x17a/0x240
exp_seq_show+0x2e5/0x560
seq_read_iter+0x419/0x1280
proc_reg_read+0x1ac/0x270
vfs_read+0x179/0x930
ksys_read+0xef/0x1c0
Freed by task 103:
The buggy address is located 32 bytes inside of
freed 192-byte region [ffff888003b14d00, ffff888003b14dc0)
Fixes: ac7b848390 ("netfilter: expect: add and use nf_ct_expect_iterate helpers")
Signed-off-by: Qi Tang <tpluszz77@gmail.com>
Reviewed-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
IPSET_ATTR_NAME and IPSET_ATTR_NAMEREF are of NLA_STRING type, they
cannot be treated like a c-string.
They either have to be switched to NLA_NUL_STRING, or the compare
operations need to use the nla functions.
Fixes: f830837f0e ("netfilter: ipset: list:set set type support")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Reject names that lack a \0 character before feeding them
to functions that expect c-strings.
Fixes tag is the most recent commit that needs this change.
Fixes: c38c4597e4 ("netfilter: implement xt_cgroup cgroup2 path match")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This is a followup to an old bug fix: NLMSG_DONE needs to account
for the netlink header size, not just the attribute size.
This can result in a WARN splat + drop of the netlink message,
but other than this there are no ill effects.
Fixes: 9dfa1dfe4d ("netfilter: nf_log: account for size of NLMSG_DONE attribute")
Reported-by: Yiming Qian <yimingqian591@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The maximum number of flowtable hardware offload actions in IPv6 is:
* ethernet mangling (4 payload actions, 2 for each ethernet address)
* SNAT (4 payload actions)
* DNAT (4 payload actions)
* Double VLAN (4 vlan actions, 2 for popping vlan, and 2 for pushing)
for QinQ.
* Redirect (1 action)
Which makes 17, while the maximum is 16. But act_ct supports for tunnels
actions too. Note that payload action operates at 32-bit word level, so
mangling an IPv6 address takes 4 payload actions.
Update flow_action_entry_next() calls to check for the maximum number of
supported actions.
While at it, rise the maximum number of actions per flow from 16 to 24
so this works fine with IPv6 setups.
Fixes: c29f74e0df ("netfilter: nf_flow_table: hardware offload support")
Reported-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
As IPv6 is built-in only, nf_ipv6_ops can be removed completely as it is
not longer necessary.
Convert all nf_ipv6_ops usage to direct function calls instead. In
addition, remove the ipv6_netfilter_init/fini() functions as they are
not necessary any longer.
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Link: https://patch.msgid.link/20260325120928.15848-12-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Maintaining a modular IPv6 stack offers image size savings for specific
setups, this benefit is outweighed by the architectural burden it
imposes on the subsystems on implementation and maintenance. Therefore,
drop it.
Change CONFIG_IPV6 from tristate to bool. Remove all Kconfig
dependencies across the tree that explicitly checked for IPV6=m. In
addition, remove MODULE_DESCRIPTION(), MODULE_ALIAS(), MODULE_AUTHOR()
and MODULE_LICENSE().
This is also replacing module_init() by device_initcall(). It is not
possible to use fs_initcall() as IPv4 does because that creates a race
condition on IPv6 addrconf.
Finally, modify the default configs from CONFIG_IPV6=m to CONFIG_IPV6=y
except for m68k as according to the bloat-o-meter the image is
increasing by 330KB~ and that isn't acceptable. Instead, disable IPv6 on
this architecture by default. This is aligned with m68k RAM requirements
and recommendations [1].
[1] http://www.linux-m68k.org/faq/ram.html
Signed-off-by: Fernando Fernandez Mancera <fmancera@suse.de>
Tested-by: Ricardo B. Marlière <rbm@suse.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org> # arm64
Link: https://patch.msgid.link/20260325120928.15848-2-fmancera@suse.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
