By passing the fsugid to kernfs_create_dir_ns(), we don't need
cgroup_kn_set_ugid() any longer. That function was added for exactly
this purpose by commit 49957f8e2a ("cgroup: newly created dirs and
files should be owned by the creator").
Eliminating this piece of duplicate code means we benefit from future
improvements to kernfs_create_dir_ns(); for example, both are lacking
S_ISGID support currently, which my next patch will add to
kernfs_create_dir_ns(). It cannot (easily) be added to
cgroup_kn_set_ugid() because we can't dereference struct kernfs_iattrs
from there.
--
v1 -> v2: 12-digit commit id
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20231208093310.297233-1-max.kellermann@ionos.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The warning for Excess struct or union member description was
removed when the $nested parameter of check_sections() was removed.
This causes some kernel-doc notation warnings to be missed.
Recently the kernel test robot somehow reported an Excess member. The
code in kernel-doc has not issued that warning since kernel v4.16, so I
don't know how the robot did it. (See the Link for the report.)
drivers/net/wireless/intel/iwlwifi/fw/dbg.c:86: warning: Excess struct/union/enum/typedef member 'trans_len' description in 'iwl_fw_dump_ptrs'
I patched that warning away even though I could not reproduce the
warning from kernel-doc. The warning should be issued for extraneous
struct member or union member description, so restore it.
Fixes: 1081de2d2f ("scripts: kernel-doc: get rid of $nested parameter")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/all/202312060810.QT9zourt-lkp@intel.com/
Cc: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231214070200.24405-1-rdunlap@infradead.org
Commit b9873755a6 ("misc: Add Nitro Secure Module driver") adds Nitro
Security Module support, which selects the non-existing config CBOR.
In the development of the commit, there was initially some code for CBOR
independent of the driver, and the driver included this code with the line
'select CBOR'. This code for CBOR was later reduced to its bare minimum of
functionality and included into the driver itself. The select CBOR remained
unnoticed and was left behind without having any further purpose.
Remove selecting the non-existing config CBOR.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Alexander Graf <graf@amazon.com>
Link: https://lore.kernel.org/r/20231211074242.22999-1-lukas.bulwahn@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/09a89926787cb9f64caa73c510f04d9f04a5136f.1702051073.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/6473afe67fc5c320a8184d0871a8561f7685e265.1702051073.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/fb750d46ac80b6dfdeaa26053a2cf9d2dc875d4d.1702051073.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/9d96646b75b10f7562d4d18010e885b7fc55e0ab.1702051073.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/7b07c8624ab53ec90554b7a665bef7662bd94295.1702051073.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/3d4c108421f2b1175d3a75ee6854e7772f8a0f82.1702051073.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/33611a4245b4dabc609a75cf0e0db5e06e9a6fc8.1702051073.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Greg lamented:
"Ick, sorry about that, obviously this test isn't actually built by any
bots :("
A quick and dirty way to prevent this problem going forward is to always
compile ndtest.ko whenever nfit_test is built. While this still does not
expose the test code to any of the known build bots, it at least makes
it the case that anyone that runs the x86 tests also compiles the
powerpc test.
I.e. the Intel NVDIMM maintainers are less likely to fall into this hole
in the future.
Link: http://lore.kernel.org/r/2023112729-aids-drainable-5744@gregkh
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Yi Zhang <yi.zhang@redhat.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/170191437889.426826.15528612879942432918.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Correct function comments to prevent warnings from
scripts/kernel-doc.
mcb-core.c:270: warning: Function parameter or member 'carrier' not described in 'mcb_alloc_bus'
mcb-core.c:336: warning: expecting prototype for mcb_bus_put(). Prototype was for mcb_bus_get() instead
mcb-core.c:463: warning: Function parameter or member 'mem' not described in 'mcb_release_mem'
mcb-core.c:463: warning: Excess function parameter 'dev' description in 'mcb_release_mem'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Johannes Thumshirn <morbidrsa@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20231206055821.17284-1-rdunlap@infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All of the other constants in this file are defined using enums, so make
the constants more consistent by defining the ioctls in an enum as well.
This is necessary for Rust Binder since the _IO macros are too
complicated for bindgen to see that they expand to integer constants.
Replacing the #defines with an enum forces bindgen to evaluate them
properly, which allows us to access them from Rust.
I originally intended to include this change in the first patch of the
Rust Binder patchset [1], but at plumbers Carlos Llamas told me that
this change has been discussed previously [2] and suggested that I send
it upstream separately.
Link: https://lore.kernel.org/rust-for-linux/20231101-rust-binder-v1-1-08ba9197f637@google.com/ [1]
Link: https://lore.kernel.org/all/YoIK2l6xbQMPGZHy@kroah.com/ [2]
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Acked-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20231208152801.3425772-1-aliceryhl@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DDR50 speed mode is enabled for MMCSD in J784s4 but its Itap Delay
Value is not present in the device tree. Thus, add Itap Delay Value
for MMCSD High Speed DDR which is DDR50 speed mode for J784s4 SoC
according to datasheet for J784s4.
[+] Refer to : section 7.10.5.17.2 MMC1/2 - SD/SDIO Interface, in
J784s4 datasheet
- https://www.ti.com/lit/ds/symlink/tda4vh-q1.pdf
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20231201082045.790478-4-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
DDR50 speed mode is enabled for MMCSD in J721s2 but its Itap Delay
Value is not present in the device tree. Thus, add Itap Delay Value
for MMCSD High Speed DDR which is DDR50 speed mode for J721s2 SoC
according to datasheet for J721s2.
[+] Refer to : section 7.10.5.17.2 MMC1/2 - SD/SDIO Interface, in
J721s2 datasheet
- https://www.ti.com/lit/ds/symlink/tda4vl-q1.pdf
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20231201082045.790478-3-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
DDR52 speed mode is enabled for eMMC in J7200 but its Itap Delay Value
is not present in the device tree. Thus, add Itap Delay Value for eMMC
High Speed DDR which is DDR52 speed mode for J7200 SoC according to
datasheet for J7200.
[+] Refer to : section 7.9.5.16.1 MMCSD0 - eMMC Interface, in
J7200 datasheet
- https://www.ti.com/lit/ds/symlink/dra821u-q1.pdf
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Reviewed-by: Udit Kumar <u-kumar1@ti.com>
Link: https://lore.kernel.org/r/20231201082045.790478-2-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add additional reg properties for BCDMA and PKTDMA nodes which are
mostly used by bootloader components before Device Manager firmware
services are available, in order to setup DMA transfers.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231213135138.929517-4-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add additional reg properties for UDMA and RingAcc nodes which are
mostly used by bootloader components before Device Manager firmware
services are available, in order to setup DMA transfers.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231213135138.929517-3-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Add additional reg properties for UDMA and RingAcc nodes which are
mostly used by bootloader components before Device Manager firmware
services are available, in order to setup DMA transfers.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20231213135138.929517-2-vigneshr@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The docs currently have <h3> and <h4> set to the same font size which
makes headings hard to distinguish. <h1> to <h3> already have entries in
sphinx-static/custom.css to shrink their size a bit from the alabaster
theme.
Add <h4> to custom.css and set it to be smaller than <h3>.
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231212213137.98453-1-donald.hunter@gmail.com
The dependencies in the mei framework are inconsistent, with some symbols
using 'select INTEL_MEI' to force it being enabled and others using
'depends on INTEL_MEI'.
In general, one should not select user-visible symbols, so change all
of these to normal dependencies, but change the default on INTEL_MEI to
be enabled when building a kernel for an Intel CPU with ME or a generic
x86 kernel.
Having consistent dependencies makes the 'menuconfig' listing more
readable by using proper indentation.
A large if/endif block is just a simpler syntax than repeating the
dependencies for each symbol.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Link: https://lore.kernel.org/r/20231214183946.109124-2-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CONFIG_INTEL_MEI_VSC_HW can be set to built-in even with CONFIG_MEI=m,
but then the driver is not built because Kbuild never enters the
drivers/misc/mei directory for built-in files, leading to a link
failure:
ERROR: modpost: "vsc_tp_reset" [drivers/misc/mei/mei-vsc.ko] undefined!
ERROR: modpost: "vsc_tp_init" [drivers/misc/mei/mei-vsc.ko] undefined!
ERROR: modpost: "vsc_tp_xfer" [drivers/misc/mei/mei-vsc.ko] undefined!
ERROR: modpost: "vsc_tp_need_read" [drivers/misc/mei/mei-vsc.ko] undefined!
ERROR: modpost: "vsc_tp_intr_enable" [drivers/misc/mei/mei-vsc.ko] undefined!
ERROR: modpost: "vsc_tp_intr_synchronize" [drivers/misc/mei/mei-vsc.ko] undefined!
ERROR: modpost: "vsc_tp_intr_disable" [drivers/misc/mei/mei-vsc.ko] undefined!
ERROR: modpost: "vsc_tp_register_event_cb" [drivers/misc/mei/mei-vsc.ko] undefined!
Add an explicit dependency on CONFIG_MEI that was apparently missing,
to ensure the VSC_HW driver cannot be built-in with MEI itself being
a loadable module.
Fixes: 566f5ca976 ("mei: Add transport driver for IVSC device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Wentong Wu <wentong.wu@intel.com>
Link: https://lore.kernel.org/r/20231214183946.109124-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rework firmware image names with the users in mind---there's no need for
variation between firmware names, apart from connected sensors. All
supported SoCs use the same firmware, too.
Use a single set of firmware binaries and assume they'll be found under
intel/vsc directory.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Wentong Wu <wentong.wu@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20231213094055.446611-1-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Remove stray empty line at the beginning of the file
to have SPDX header t the first line.
Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20231214143752.294008-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In v6.7-rc1 sparse warns:
drivers/net/wireless/ath/ath11k/mac.c:4702:15: error: too long token expansion
drivers/net/wireless/ath/ath11k/mac.c:4702:15: error: too long token expansion
drivers/net/wireless/ath/ath11k/mac.c:8393:23: error: too long token expansion
drivers/net/wireless/ath/ath11k/mac.c:8393:23: error: too long token expansion
Workaround the warnings by refactoring the code to a new function, which also
reduces code duplication. And in the new function use max3() to make the code
more readable.
No functional changes, compile tested only.
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20231214161740.1582340-1-kvalo@kernel.org
This reverts commit 1f1f7d548a. The commit
caused bootup failure on QCN9274 hw2.0 platform. Incorrect hardcode DP
irq offset overwrite the CE irq, which caused the driver to miss the
mandatory bootup message from the firmware through the CE interrupt. This
occurs because the CE count differs between platforms. The revert has no
impact since the original change was based on an incorrect assumption.
Log:
ath12k_pci 0000:06:00.0: fw_version 0x1011001d fw_build_timestamp 2022-12-02 01:16 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
ath12k_pci 0000:06:00.0: failed to receive control response completion, polling..
ath12k_pci 0000:06:00.0: Service connect timeout
ath12k_pci 0000:06:00.0: failed to connect to HTT: -110
ath12k_pci 0000:06:00.0: failed to start core: -110
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20231214053215.2087308-1-quic_periyasa@quicinc.com
Move the howto.rst file in Spanish translation to /sp_SP/process/ to
ensure its location is symmetrical to its corresponding version in
English.
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231211023730.2026204-5-avadhut.naik@amd.com
By default, links in translated Spanish documentation redirect to
documents in English, even if their corresponding Spanish version
exists.
Warn readers about this beforehand through disclaimer.rst.
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231211023730.2026204-4-avadhut.naik@amd.com
Translate Documentation/process/submit-checklist.rst into Spanish.
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231211023730.2026204-3-avadhut.naik@amd.com
Translate Documentation/process/management-style.rst into Spanish.
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Reviewed-by: Carlos Bilbao <carlos.bilbao@amd.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231211023730.2026204-2-avadhut.naik@amd.com
We will eventually switch to protecting the GPIO descriptors with a mutex
but until then, we need to allocate memory for the label copy atomically
while we're holding the global spinlock.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/linux-gpio/62588146-eed6-42f7-ba26-160226b109fe@moroto.mountain/T/#u
Fixes: f8d05e276b ("gpiolib: remove gpiochip_is_requested()")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Commit 31abfdda65 (docs: Deprecate use of Sphinx < 2.4.x) in 6.2 added a
warning that support for older versions of Sphinx would be going away.
There have been no complaints, so the time has come. Raise the minimum
Sphinx version to 2.4.4 and clean out some compatibility code that we no
longer need.
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Link: https://lore.kernel.org/r/874jgs47fq.fsf@meer.lwn.net
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Rather than using svc_get() and svc_put() to hold a stable reference to
the nfsd_svc for netlink lookups, simply hold the mutex for the entire
time.
The "entire" time isn't very long, and the mutex is not often contented.
This makes way for us to remove the refcounts of svc, which is more
confusing than useful.
Reported-by: Jeff Layton <jlayton@kernel.org>
Closes: https://lore.kernel.org/linux-nfs/5d9bbb599569ce29f16e4e0eef6b291eda0f375b.camel@kernel.org/T/#u
Fixes: bd9d6a3efa ("NFSD: add rpc_status netlink support")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
If write_ports_addfd or write_ports_addxprt fail, they call nfsd_put()
without calling nfsd_last_thread(). This leaves nn->nfsd_serv pointing
to a structure that has been freed.
So remove 'static' from nfsd_last_thread() and call it when the
nfsd_serv is about to be destroyed.
Fixes: ec52361df9 ("SUNRPC: stop using ->sv_nrthreads as a refcount")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This driver supports pinctrl/GPIO hardware found on Intel Meteor Point
(a Meteor Lake PCH) providing users a pinctrl and GPIO interfaces
including GPIO interrupts.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add support for CN9130 and CN9131 COM Express Type 7 CPU
module boards by Marvell.
Define these COM Express CPU modules as dtsi and
provide a dtsi file for a carrier board (Marvell AC5X RD
COM Express type 7 carrier board).
This Carrier board only utilizes the PCIe link, hence no
special device / driver support is provided by this dtsi file.
Finally, provide a dts file for the com express carrier and
CPU module combination.
These COM Express boards differ from the existing CN913x DB
boards by the type of ethernet connection (RGMII),
the type of voltage regulators (not i2c expander based)
and the USB phy (not UTMI based).
Note - PHY + RGMII connector is OOB on CPU module.
CN9131 COM Express board is basically CN9130 COM Express board
with an additional CP115 I/O co-processor, which in this case
provides an additional USB host controller on the board.
Signed-off-by: Elad Nachman <enachman@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add dt bindings for:
CN9130 COM Express CPU module
CN9131 COM Express CPU module
AC5X RD COM Express Type 7 carrier board.
AC5X RD COM Express board with a CN9131 COM Express Type 7 CPU module.
Signed-off-by: Elad Nachman <enachman@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Add ac5 dts files to the list of maintained Marvell Armada dts files
by defining the entry as covering the entire marvell arm64 directory
Signed-off-by: Elad Nachman <enachman@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
For others to be able to pull from in a stable way.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZXxnUw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymFagCgzXm3+51TOHV3ScP/ZglEFZZUCZoAmgMlaukR
yXLJsCZLWTXwahQewglC
=8xEi
-----END PGP SIGNATURE-----
Merge tag 'device_is_big_endian-6.8-rc1' into driver-core-next
Tag for the device_is_big_endian() addition to property.h
For others to be able to pull from in a stable way.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some users want to use the struct device pointer to see if the
device is big endian in terms of Open Firmware specifications,
i.e. if it has a "big-endian" property, or if the kernel was
compiled for BE *and* the device has a "native-endian" property.
Provide inline helper for the users.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231025184259.250588-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The rtc on the mox shares its interrupt line with the moxtet bus. Set
the interrupt type to be consistent between both devices. This ensures
correct setup of the interrupt line regardless of probing order.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Cc: <stable@vger.kernel.org> # v6.2+
Fixes: 21aad8ba61 ("arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC")
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The moxtet module fails to auto-load on. Add a SPI id table to
allow it to do so.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Cc: <stable@vger.kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The Turris Mox shares the moxtet IRQ with various devices on the board,
so mark the IRQ as shared in the driver as well.
Without this loading the module will fail with:
genirq: Flags mismatch irq 40. 00002002 (moxtet) vs. 00002080 (mcp7940x)
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
It's clearly been a while since someone looked at this, so I gave it a
quick shot. There are few issues in here:
- Random bundling of members that are mostly read-only and often written
- Random holes that need not be there
This moves the most frequently used bits into cacheline 1 and 2, with
the 2nd one being more write intensive than the first one, which is
basically read-only.
Outside of making this work a bit more efficiently, it also reduces the
size of struct request_queue for my test setup from 864 bytes (spanning
14 cachelines!) to 832 bytes and 13 cachelines.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/d2b7b61c-4868-45c0-9060-4f9c73de9d7e@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bio_add_hw_page currently always fails or succeeds. This is fine for
the existing callers that always add PAGE_SIZE worth given that the
max_segment_size and max_sectors must always allow at least a page
worth of data. But when we want to add it for bigger amounts of data
this means it can also fail when adding the data to a bio, and creating
a fallback for that becomes really annoying in the callers.
Make use of the existing API design that allows to return a smaller
length than the one passed in and add up to max_segment_size worth
of data from a larger input. All the existing callers are fine with
this - not because they handle this return correctly, but because they
never pass more than a page in.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20231204173419.782378-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Reordered a check to avoid a possible overflow when adding len to bv_len.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20231204173419.782378-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These special compatibles are added to the Marvell Armada 3720
Turris Mox in order to be able to special-case and avoid
warnings on the non-standard nodenames that are ABI on this
one board due to being used in deployed versions of U-Boot.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Fix some errors in the Marvell MV88E6xxx switch descriptions:
- The top node had no address size or cells.
- switch0@0 is not OK, should be ethernet-switch@0.
- ports should be ethernet-ports
- port@0 should be ethernet-port@0
- PHYs should be named ethernet-phy@
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>