The Scalar Crypto specification defines Zk as a shorthand for the
Zkn, Zkr and Zkt extensions. The same follows for both Zkn, Zks and Zbk,
which are all shorthands for various other extensions. The detailed
breakdown can be found in their dt-binding entries.
Since Zkn also implies the Zbkb, Zbkc and Zbkx extensions, simply passing
"zk" through a DT should enable all of Zbkb, Zbkc, Zbkx, Zkn, Zkr and Zkt.
For example, setting the "riscv,isa" DT property to "rv64imafdc_zk"
should generate the following cpuinfo output:
"rv64imafdc_zicntr_zicsr_zifencei_zihpm_zbkb_zbkc_zbkx_zknd_zkne_zknh_zkr_zkt"
riscv_isa_ext_data grows a pair of new members, to permit setting the
relevant bits for "bundled" extensions, both while parsing the ISA string
and the new dedicated extension properties.
Co-developed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Evan Green <evan@rivosinc.com>
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231114141256.126749-4-cleger@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This patch adds a comment to check_mem_size_reg -- a function whose
meaning is not very transparent. The function implicitly deals with two
registers connected by convention, which is not obvious.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20231210225149.67639-1-andreimatei1@gmail.com
-----BEGIN PGP SIGNATURE-----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=MQyi
-----END PGP SIGNATURE-----
Merge tag 'pef2256-framer' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Linus Walleij says:
====================
Immutable tag for the PEF2256 framer
* tag 'pef2256-framer' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
MAINTAINERS: Add the Lantiq PEF2256 driver entry
pinctrl: Add support for the Lantic PEF2256 pinmux
net: wan: framer: Add support for the Lantiq PEF2256 framer
dt-bindings: net: Add the Lantiq PEF2256 E1/T1/J1 framer
net: wan: Add framer framework support
====================
Link: https://lore.kernel.org/all/CACRpkdYT1J7noFUhObFgfA60XQAfL4rb=knEmWS__TKKtCMh7Q@mail.gmail.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make it possible to use a `CString` with the `pr_*` macros directly. That
is, instead of:
pr_debug!("trying to open {:?}\n", &*filename);
we can now write:
pr_debug!("trying to open {:?}\n", filename);
Signed-off-by: Asahi Lina <lina@asahilina.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Link: https://lore.kernel.org/r/20230714-cstring-debug-v1-1-4e7c3018dd4f@asahilina.net
[ Reworded to use Alice's commit message as discussed. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
After contributing the driver, add myself as the maintainer for the
Lantiq PEF2256 driver.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Link: https://lore.kernel.org/r/20231128132534.258459-6-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
This kind of component can be found in old telecommunication system.
It was used to digital transmission of many simultaneous telephone calls
by time-division multiplexing. Also using HDLC protocol, WAN networks
can be reached through the framer.
This pinmux support handles the pin muxing part (pins RP(A..D) and pins
XP(A..D)) of the PEF2256.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20231128132534.258459-5-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231128132534.258459-4-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Lantiq PEF2256 is a framer and line interface component designed to
fulfill all required interfacing between an analog E1/T1/J1 line and the
digital PCM system highway/H.100 bus.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20231128132534.258459-3-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
A framer is a component in charge of an E1/T1 line interface.
Connected usually to a TDM bus, it converts TDM frames to/from E1/T1
frames. It also provides information related to the E1/T1 line.
The framer framework provides a set of APIs for the framer drivers
(framer provider) to create/destroy a framer and APIs for the framer
users (framer consumer) to obtain a reference to the framer, and
use the framer.
This basic implementation provides a framer abstraction for:
- power on/off the framer
- get the framer status (line state)
- be notified on framer status changes
- get/set the framer configuration
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20231128132534.258459-2-herve.codina@bootlin.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
qed_ilt_shadow_alloc() will call qed_ilt_shadow_free() to
free p_hwfn->p_cxt_mngr->ilt_shadow on error. However,
qed_cxt_tables_alloc() accesses the freed pointer on failure
of qed_ilt_shadow_alloc() through calling qed_cxt_mngr_free(),
which may lead to use-after-free. Fix this issue by setting
p_mngr->ilt_shadow to NULL in qed_ilt_shadow_free().
Fixes: fe56b9e6a8 ("qed: Add module with basic common support")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Link: https://lore.kernel.org/r/20231210045255.21383-1-dinghao.liu@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When compiling with gcc version 14.0.0 20231129 (experimental) and
CONFIG_FORTIFY_SOURCE=y, I've noticed the following warning:
...
In function 'fortify_memcpy_chk',
inlined from 'ax88796c_tx_fixup' at drivers/net/ethernet/asix/ax88796c_main.c:287:2:
./include/linux/fortify-string.h:588:25: warning: call to '__read_overflow2_field'
declared with attribute warning: detected read beyond size of field (2nd parameter);
maybe use struct_group()? [-Wattribute-warning]
588 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
...
This call to 'memcpy()' is interpreted as an attempt to copy TX_OVERHEAD
(which is 8) bytes from 4-byte 'sop' field of 'struct tx_pkt_info' and
thus overread warning is issued. Since we actually want to copy both
'sop' and 'seg' fields at once, use the convenient 'struct_group()' here.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Acked-by: Łukasz Stelmach <l.stelmach@samsung.com>
Link: https://lore.kernel.org/r/20231211090535.9730-1-dmantipov@yandex.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If some of p9pdu_readf() calls inside case 'T' in p9pdu_vreadf() fails,
the error path is not handled properly. *wnames or members of *wnames
array may be left uninitialized and invalidly freed.
Initialize *wnames to NULL in beginning of case 'T'. Initialize the first
*wnames array element to NULL and nullify the failing *wnames element so
that the error path freeing loop stops on the first NULL element and
doesn't proceed further.
Found by Linux Verification Center (linuxtesting.org).
Fixes: ace51c4dd2 ("9p: add new protocol support code")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Message-ID: <20231206200913.16135-1-pchelkin@ispras.ru>
Cc: stable@vger.kernel.org
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Christian Schoenebeck <linux_oss@crudebyte.com>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Add support for the Anbernic RG351V, which is a handheld gaming console
from Anbernic with an RK3326 SoC, a 640x480 LCD display, a single
analog joystick with several face buttons, two USB C ports, and
internal WiFi over USB. All hardware has been tested as working
except for the battery, which will require further modification to the
mainline rk817 battery driver before it can be used (the device was
built without a shunt resistor, and as such the battery cannot
measure current; only voltage).
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231120230131.57705-4-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Split the RG351M into its own DTSI file. The RG351M, unlike the Odroid
Go Advance, has no ADC joysticks, no GPIO buttons (except for volume
on the RG351V), a PWM vibrator that interferes with an Odroid
regulator, and different LEDs. Split the RG351M into a DTSI file
that can then be imported into the DTS files for the RG351M and a
new RG351V.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231120230131.57705-3-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The Anbernic RG351V is a portable gaming console from Anbernic with the
RK3326 SoC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231120230131.57705-2-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add ethernet0 alias to the board dts files for a few supported RK3566 boards
that had it missing. Also, remove the ethernet0 alias from one RK3566 SoM
dtsi file, which doesn't enable the GMAC, and add the ethernet0 alias back to
the dependent board dts files, which actually enable the GMAC.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/d2a272e0ae0fff0adfab8bb0238243b11d348799.1702368023.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Not all supported boards actually use the PX30's built-in (G)MAC, while the
SoC TRM and the datasheet don't define some standard numbering in this case.
Thus, remove the ethernet0 alias from the PX30 SoC dtsi file, and add the same
alias back to the appropriate board dts(i) files.
This is quite similar to the already performed migration of the mmcX aliases
from the Rockchip SoC dtsi files to the board dts(i) files.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/0d9da8959b4f567622676c34b5feb74c49489554.1702366958.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Not all supported boards actually use the RK3328's built-in GMACs, while the
SoC TRM and the datasheet don't define some standard numbering in this case.
Thus, remove the ethernet0 and ethernet1 aliases from the RK3328 SoC dtsi file,
and add the same alias back to the appropriate board dts(i) files.
These changes also touch one RK3318-based board dts, because it actually
depends on the RK3328 SoC dtsi and enables one of the GMACs.
This is quite similar to the already performed migration of the mmcX aliases
from the Rockchip SoC dtsi files to the board dts(i) files.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/0c14f2e354d32f5d45c718ce16643553ca72f6a5.1702366958.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Not all supported boards actually use the RK3368's built-in GMAC, while the
SoC TRM and the datasheet don't define some standard numbering in this case.
Thus, remove the ethernet0 alias from the RK3368 SoC dtsi file, and add the
same alias back to the appropriate board dts(i) files.
This is quite similar to the already performed migration of the mmcX aliases
from the Rockchip SoC dtsi files to the board dts(i) files.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/77115184d633190c917d868f883070e100d93dbc.1702366958.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Not all supported boards actually use the RK3399's built-in GMAC, while the
SoC TRM and the datasheet don't define some standard numbering in this case.
Thus, remove the ethernet0 alias from the RK3399 SoC dtsi file, and add the
same alias back to the appropriate board dts(i) files.
This is quite similar to the already performed migration of the mmcX aliases
from the Rockchip SoC dtsi files to the board dts(i) files.
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20879826c01fb9ead71c339866846ea794669802.1702366958.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
No functional changes.
Adjust to comply with dt-schema requirements
and make possible to validate values.
Acked-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20231209171653.85468-2-david@ixit.cz
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Rockchip SoC TRM, SoC datasheet and board schematics always refer to
the same gpio numbers - even if not all are used for a specific board.
In order to not have to re-define them for every board add the
aliases to SoC dtsi files.
Co-developed-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/56daeead-1d35-44bb-00c0-614b84a986de@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add dynamic-power-coefficient to the GPU node. That will create Energy
Model for the GPU based on the coefficient and OPP table information.
It will enable mechanism such as DTMP or IPA to work with the GPU DVFS.
In similar way the Energy Model for CPUs in rk3399 is created, so both
are aligned in power scale. The maximum power used from this coefficient
is 1.5W at 600MHz.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20231127081511.1911706-1-lukasz.luba@arm.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The spi controllers on rk3588 are named spi0 - spi4. Board schematics
also use these exact numbers and we want those names to also reflect
in the OS devices because everything else would just cause confusion.
Userspace spi access is a thing afterall.
To prevent each board repeating their list of spi aliases, define them
in the soc dtsi, as previous Rockchip soc like the rk356x do already.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20231205164842.556684-5-heiko@sntech.de
The gpio controllers on rk3588 are named gpio0 - gpio4. Board schematics
also use these exact numbers and we want those names to also reflect
in the OS devices because everything else would just cause confusion.
Userspace gpio access is a thing afterall.
To prevent each board repeating their list of gpio aliases, define them
in the soc dtsi, as previous Rockchip soc like the rk356x do already.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20231205164842.556684-4-heiko@sntech.de
The i2c controllers on rk3588 are named i2c0 - i2c8. Board schematics
also use these exact numbers and we want those names to also reflect
in the OS devices because everything else would just cause confusion.
Userspace i2c access is a thing afterall.
To prevent each board repeating their list of i2c aliases, define them
in the soc dtsi, as all previous Rockchip soc do already.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20231205164842.556684-3-heiko@sntech.de
The serial ports on rk3588 are named uart0 - uart9. Board schematics
also use these exact numbers and we want those names to also reflect
in the OS devices because everything else would just cause confusion.
To prevent each board repeating their list of serial aliases, move them
to the soc dtsi, as all previous Rockchip soc do already.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20231205164842.556684-2-heiko@sntech.de
Add support for the Powkiddy X55. The Powkiddy X55 is a handheld
gaming device with a 720p 5.5 inch screen powered by the Rockchip
RK3566 SoC. It includes a Realtek 8821cs WiFi/BT module, 2 ADC
joysticks powered by 4 dedicated ADC channels, and several GPIO
face buttons. There are 2 SDMMC slots (sdmmc1 and sdmmc3), and an
8GB internal eMMC.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20231204185719.569021-11-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable USB3 host controller for the Radxa ROCK 5 Model A. This adds
USB3 for the lower USB3 port (the one closer to the PCB).
The upper USB3 port uses the RK3588 USB TypeC host controller, which
use a different PHY without upstream support.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20231106155934.80838-2-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Enable USB3 host controller for the Radxa ROCK 5 Model B. This adds
USB3 for the upper USB3 port (the one further away from the PCB).
The lower USB3 and the USB-C ports use the RK3588 USB TypeC host
controller, which use a different PHY without upstream support.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20231106155934.80838-1-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Without fifo depths attempting to change the MTU will fail. These values
are from the RK3328 Technical Reference Manual, gmac2io interface tested
with Rock64.
Signed-off-by: shironeko <shironeko@tesaguri.club>
Link: https://lore.kernel.org/r/20231116214042.11134-2-shironeko@tesaguri.club
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add names to the pins of the general-purpose expansion header as given in the
Radxa GPIO page[1] following the conventions in the kernel documentation[2] to
make it easier for users to correlate the pins with functions when using
utilities such as gpioinfo.
[1] https://wiki.radxa.com/RockpiS/hardware/gpio
[2] Documentation/devicetree/bindings/gpio/gpio.txt
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Link: https://lore.kernel.org/r/20231120162232.27653-1-twoerner@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Use pcie_capability_read_word() for reading LNKSTA and remove the
custom define that matches to PCI_EXP_LNKSTA.
As only single user for cap_offset remains, replace it with a call to
pci_pcie_cap(). Instead of e1000_adapter, make local variable out of
pci_dev because both users are interested in it.
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The conversion to CLK_FRAC_DIVIDER_POWER_OF_TWO_PS uses wrong flags
in the parameters and hence miscalculates the values in the clock
divider. Fix this by applying the flag to the proper parameter.
Fixes: 82f53f9ee5 ("clk: fractional-divider: Introduce POWER_OF_TWO_PS flag")
Reported-by: Alex Vinarskis <alex.vinarskis@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
WARN_ON, and a BUG.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAmV4tMwACgkQ8vlZVpUN
gaNZRAf/ejQZne9iZck8SSV62mkR9E7EwN9J2+gkWFrlsyurErZlVsBA5yRB+i9A
V1v6DRGDnYFwKFNHJhR/RW9NhEwpYkX9Vo3miksSCq8rsAB1kjSs3xVrTBIYi/8c
ztw4ncyxW7RRFRmruzFfUEKriiyJzxJYx+EqbNsQHcl5ET6Y2/5zM0bChV9MwuN3
iS1Rm98RbHVrylzKbGG562MaGdJyUYvQ+mnRCgma1mTu6K9SWLJg211icLTsDhHg
XEB/QGWji2O7xOudcry8wLIpoR6rYPAhWfbkLekW1K9hjV3iXuJoVjj7eB9LctMf
FAXr8u0FKJI0iIQyrQrEEqIuh+jKBA==
=4zQL
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix various bugs / regressions for ext4, including a soft lockup, a
WARN_ON, and a BUG"
* tag 'ext4_for_linus-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: fix soft lockup in journal_finish_inode_data_buffers()
ext4: fix warning in ext4_dio_write_end_io()
jbd2: increase the journal IO's priority
jbd2: correct the printing of write_flags in jbd2_write_superblock()
ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS
The for loop does not iterate over the last element of the node_to_pxm_map
array. This could lead to a conflict between the final fake_pxm value and
the existing pxm values. That is, the final fake_pxm value can not be
guaranteed to be an unused pxm value.
While at it, fix up white space in slit_valid().
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The first_unset_node() function returns the first unused node in
nodes_found_map. If all nodes are in use, the function returns
MAX_NUMNODES.
Use this return value to determine whether there are any available node
values in nodes_found_map, eliminating the need to use nodes_weight()
for this purpose.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The acpi_map_pxm_to_node() function will never return a node value
that is greater than or equal to MAX_NUMNODES. Remove the unnecessary
`node >= MAX_NUMNODES` check to keep the code consistent with other users
of the acpi_map_pxm_to_node() function.
Signed-off-by: Yuntao Wang <ytcoode@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add serial driver data for Google Tensor gs101 SoC and a common
fifoszdt_serial_drv_data that can be used by platforms that specify the
samsung,uart-fifosize DT property.
A corresponding dt-bindings patch updates the yaml to ensure
samsung,uart-fifosize is a required property.
Tested-by: Will McVicker <willmcvicker@google.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20231211162331.435900-14-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>