Commit graph

1,294,546 commits

Author SHA1 Message Date
Satya Priya Kakitapalli
6ebd9a4f8b clk: qcom: gpucc-sm8150: Update the gpu_cc_pll1 config
Update the test_ctl_hi_val and test_ctl_hi1_val of gpu_cc_pll1
as per latest HW recommendation.

Fixes: 0cef71f2cc ("clk: qcom: Add graphics clock controller driver for SM8150")
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231122042814.4158076-1-quic_skakitap@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:42:41 -08:00
Neil Armstrong
17fc6f3919 arm64: deconfig: enable Qualcomm SM8650 SoC drivers
Enable Clocks, Pinctrl and Interconnect drivers in the ARM64
defconfig for the Qualcomm SM8650 SoC to boot the SM8650 MTP
(Mobile Test Platform) and QRD (Qualcomm Reference Device) boards.

TCSRCC, GCC, Interconnect, and Pinctrl config are marked as builtin and
not modules due to boot dependencies.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231121-topic-sm8650-upstream-defconfig-v1-1-2500565fc21b@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:42:08 -08:00
Dang Huynh
d50b5cb1a8 soc: qcom: socinfo: Add PM8937 Power IC
The PM8917 and PM8937 uses the same SUBTYPE ID.

The PM8937 is found in boards with MSM8917, MSM8937 and MSM8940
and APQ variants.

Signed-off-by: Dang Huynh <danct12@riseup.net>
Link: https://lore.kernel.org/r/20231121-pm8937-v2-4-b0171ab62075@riseup.net
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:41:29 -08:00
Johan Hovold
d0ec3c4c11 ARM: dts: qcom: sdx55: fix USB wakeup interrupt types
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: fea4b41022 ("ARM: dts: qcom: sdx55: Add USB3 and PHY support")
Cc: stable@vger.kernel.org      # 5.12
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:40:40 -08:00
Rob Herring
405820eae7 firmware: microchip: Replace of_device.h with explicit include
The DT of_device.h and of_platform.h date back to the separate
of_platform_bus_type before it was merged into the regular platform bus.
As part of that merge prepping Arm DT support 13 years ago, they
"temporarily" include each other. They also include platform_device.h
and of.h. Soon the implicit includes are going to be removed.

of_device.h isn't needed, but platform_device.h is.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
2023-12-07 16:40:35 +00:00
Johan Hovold
29d91ecf53 arm64: dts: qcom: sm8550: fix USB wakeup interrupt types
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Note that only triggering on rising edges can be used to detect resume
events but not disconnect events.

Fixes: 7f7e5c1b03 ("arm64: dts: qcom: sm8550: Add USB PHYs and controller nodes")
Cc: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20231120164331.8116-12-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:40:24 -08:00
Johan Hovold
54524b6987 arm64: dts: qcom: sm8150: fix USB wakeup interrupt types
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: 0c9dde0d20 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes")
Fixes: b33d2868e8 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes")
Cc: stable@vger.kernel.org      # 5.10
Cc: Jonathan Marek <jonathan@marek.ca>
Cc: Jack Pham <quic_jackp@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Jack Pham <quic_jackp@quicinc.com>
Link: https://lore.kernel.org/r/20231120164331.8116-11-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:40:24 -08:00
Johan Hovold
41952be666 arm64: dts: qcom: sm6375: fix USB wakeup interrupt types
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: 59d34ca97f ("arm64: dts: qcom: Add initial device tree for SM6375")
Cc: stable@vger.kernel.org      # 6.2
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-10-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:40:24 -08:00
Johan Hovold
84ad9ac8d9 arm64: dts: qcom: sdm845: fix USB wakeup interrupt types
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: ca4db2b538 ("arm64: dts: qcom: sdm845: Add USB-related nodes")
Cc: stable@vger.kernel.org      # 4.20
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:40:24 -08:00
Johan Hovold
de3b3de309 arm64: dts: qcom: sdm670: fix USB wakeup interrupt types
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: 07c8ded6e3 ("arm64: dts: qcom: add sdm670 and pixel 3a device trees")
Cc: stable@vger.kernel.org      # 6.2
Cc: Richard Acayan <mailingradian@gmail.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Acked-by: Richard Acayan <mailingradian@gmail.com>
Link: https://lore.kernel.org/r/20231120164331.8116-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:40:24 -08:00
Johan Hovold
0dc0f6da3d arm64: dts: qcom: sc8180x: fix USB wakeup interrupt types
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: b080f53a8f ("arm64: dts: qcom: sc8180x: Add remoteprocs, wifi and usb nodes")
Cc: stable@vger.kernel.org      # 6.5
Cc: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:40:24 -08:00
Johan Hovold
24f8aba9a7 arm64: dts: qcom: sc7280: fix usb_2 wakeup interrupt types
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Note that only triggering on rising edges can be used to detect resume
events but not disconnect events.

Fixes: bb9efa59c6 ("arm64: dts: qcom: sc7280: Add USB related nodes")
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:40:23 -08:00
Johan Hovold
c34199d967 arm64: dts: qcom: sc7280: fix usb_1 wakeup interrupt types
A recent cleanup reordering the usb_1 wakeup interrupts inadvertently
switched the DP and SuperSpeed interrupt trigger types.

Fixes: 4a7ffc10d1 ("arm64: dts: qcom: align DWC3 USB interrupts with DT schema")
Cc: stable@vger.kernel.org      # 5.19
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231120164331.8116-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:40:23 -08:00
Johan Hovold
9b956999bf arm64: dts: qcom: sc7180: fix USB wakeup interrupt types
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Fixes: 0b766e7fe5 ("arm64: dts: qcom: sc7180: Add USB related nodes")
Cc: stable@vger.kernel.org      # 5.10
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231120164331.8116-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:40:23 -08:00
Johan Hovold
0984bc0165 arm64: dts: qcom: sa8775p: fix USB wakeup interrupt types
The DP/DM wakeup interrupts are edge triggered and which edge to trigger
on depends on use-case and whether a Low speed or Full/High speed device
is connected.

Note that only triggering on rising edges can be used to detect resume
events but not disconnect events.

Fixes: de1001525c ("arm64: dts: qcom: sa8775p: add USB nodes")
Cc: Shazad Hussain <quic_shazhuss@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Link: https://lore.kernel.org/r/20231120164331.8116-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:40:23 -08:00
Nikita Travkin
12fbe58560 arm64: dts: qcom: msm8916-longcheer-l8150: Add battery and charger
Longcheer L8150 doesn't have any dedicated fuel-gauge or charger,
instead making use of the pmic hardware blocks for those purposes.

Add pm8916 bms and charger, as well as the battery cell description
that those blocks rely on.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20231120-pm8916-dtsi-bms-lbc-v4-3-4f91056c8252@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:38:40 -08:00
Nikita Travkin
26b87a3dc3 arm64: dts: qcom: pm8916: Add BMS and charger
pm8916 contains some hardware blocks for battery powered devices:

- VM-BMS: Battery voltage monitoring block.
- LBC: Linear battery charger.

Add them to the pmic dtsi so the devices that make use of those blocks
can enable them.

Signed-off-by: Nikita Travkin <nikita@trvn.ru>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231120-pm8916-dtsi-bms-lbc-v4-2-4f91056c8252@trvn.ru
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:38:40 -08:00
Konrad Dybcio
6a7f8c635d arm64: dts: qcom: sc7280: Add 0xac Adreno speed bin
A643 (A635 speedbin 0xac) tops out at 812 MHz. Fill in the
opp-supported-hw appropriately.

Note that fuseval 0xac is referred to as speedbin 1 downstream, but
that was already in use upstream, so 2 was chosen instead.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230926-topic-a643-v2-4-06fa3d899c0a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:37:45 -08:00
Konrad Dybcio
31edad4785 arm64: dts: qcom: sc7280: Mark Adreno SMMU as DMA coherent
The SMMUs on sc7280 are cache-coherent. APPS_SMMU is marked as such,
mark the GPU one as well.

Fixes: 96c471970b ("arm64: dts: qcom: sc7280: Add gpu support")
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230926-topic-a643-v2-3-06fa3d899c0a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:37:45 -08:00
Konrad Dybcio
94085049fd arm64: dts: qcom: sc7280: Fix up GPU SIDs
GPU_SMMU SID 1 is meant for Adreno LPAC (Low Priority Async Compute).
On platforms that support it (in firmware), it is necessary to
describe that link, or Adreno register access will hang the board.

The current settings are functionally identical, *but* due to what is
likely hardcoded security policies, the secure firmware rejects them,
resulting in the board hanging. To avoid that, alter the settings such
that SID 0 and 1 are described separately.

Fixes: 96c471970b ("arm64: dts: qcom: sc7280: Add gpu support")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230926-topic-a643-v2-2-06fa3d899c0a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:37:45 -08:00
Konrad Dybcio
0ab1bef0b7 arm64: dts: qcom: sc7280: Add ZAP shader support
Non-Chrome SC7280-family platforms ship a ZAP shader with the Adreno GPU.
Describe that and make sure it doesn't interfere with Chrome devices.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230926-topic-a643-v2-1-06fa3d899c0a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:37:45 -08:00
Arnd Bergmann
7c9bb19045 i.MX fixes for 6.7:
- A MAINTAINERS update to reinstate freescale ARM64 DT directory in i.MX
   entry.
 - A series from Alexander Stein to fix #pwm-cells for imx8-ss.
 - A series from Haibo Chen to fix GPIO node name for i.MX93 and
   i.MX8ULP.
 - Add parkmode-disable-ss-quirk for DWC3 on i.MX8MP and i.MX8MQ to fix
   an issue that the controller may hang when processing transactions
   under heavy USB traffic from multiple endpoints.
 - Fix mediamix block power on/off for i.MX93 by correcting the power
   domain clock to be 'nic_media'.
 - A couple of Ethernet PHY clock regression fixes for imx6ul-pico and
   imx6q-skov board.
 - Fix edma3 power domain for i.MX8QM to fix a panic during startup
   process.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmVxFsoUHHNoYXduZ3Vv
 QGtlcm5lbC5vcmcACgkQUFdYWoewfM4RoQgAnIQmAJj9heZ3tQpImqdLxQVfNFIf
 nlvLU76yf600IrUAkIT+ctQx9R5pDjIVI+9iYlgUfTI6oPLk7GqHYKyPwPwW2EUb
 vu+8tfFVDicekP4x01MidYTgx1JOq8IG/YdXDNpcA9RmavViL1xIQQDo0zbQEm8K
 Dv1WfS/hinWQZ2W9gxfr6uTXVZJYXa0LeCFLY8FVCY9J7Am2OTvYW1I5bLqUI4Wx
 g8LXPJ/iBtK4+0dxdOjmzTsAm8TVw0kGcbOcZTyalWoW6cxCPAQlNJc6sFVwa3eV
 ghdZn0ldm85jEHBphfbn+QCaYQHLjDnpZnamaKZYpgZEt7ifv4sNmb7FmQ==
 =tC65
 -----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmVx9JIACgkQYKtH/8kJ
 UieGyRAAlQOf0PWmcLDEWeiUSgKxU9Uh/0XxDhQ00nRYhcP/WkPfdc1+55yHHb+0
 3e/7gfBvHKraPPEqtE3pgwxh3D57EZls5xnhuhcpLcxB5MkN444LcotT+6+vqMcl
 ppXBLlLJ1NGt6mXvby8t/ZR5LhxWzr69eAKF8ZrQReq1hPYq6+phWAMZmTTXgPLC
 voAOiPABn8sOysVAXBfOhPqlNtZpSEBxuwn2bHJWtaUAbYHegmF4RBMWDBhj3YGy
 v6uVv31SqH3sd0iPXwWVgBeJsxxjNnvU/YqwzPevaJV7Hq4YxG/u9Qn1g40DYyYM
 R8N+pLG8C6CUaYiCCoo/aGaeH5eeCte30j4m/VvuLgsoupOCycImSNEOx6+H7oBI
 ATHvkIifDgmPVrDF5n0+3sklEk6qts7duN534qcDY/mj9UttmMwbXUfQbCy7sbtV
 ENFJ+GYF4dXuAkQ+ISPuURYC+KX0qFPAuM0RhA6tMkepA3Q9opQpXd7M8gT3xhe3
 d+2a2WYwohCuqxS0bqWLmRqp/1fq4aSL/oiIb4Eb8NHyAoZI66rygtPQHolBZLoB
 KiIJr14VcrEKJff9ap98USwiaKb7LyndjRWNdtY6blHuonGjEi5CV6KWB9ShKe0g
 gzc0tp7TjT+kk4o03wzEsK90LgG+MhGnh9zRKm5g7BYZYy9o4RU=
 =K7FV
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.7:

- A MAINTAINERS update to reinstate freescale ARM64 DT directory in i.MX
  entry.
- A series from Alexander Stein to fix #pwm-cells for imx8-ss.
- A series from Haibo Chen to fix GPIO node name for i.MX93 and
  i.MX8ULP.
- Add parkmode-disable-ss-quirk for DWC3 on i.MX8MP and i.MX8MQ to fix
  an issue that the controller may hang when processing transactions
  under heavy USB traffic from multiple endpoints.
- Fix mediamix block power on/off for i.MX93 by correcting the power
  domain clock to be 'nic_media'.
- A couple of Ethernet PHY clock regression fixes for imx6ul-pico and
  imx6q-skov board.
- Fix edma3 power domain for i.MX8QM to fix a panic during startup
  process.

* tag 'imx-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx28-xea: Pass the 'model' property
  ARM: dts: imx7: Declare timers compatible with fsl,imx6dl-gpt
  MAINTAINERS: reinstate freescale ARM64 DT directory in i.MX entry
  arm64: dts: imx8-apalis: set wifi regulator to always-on
  ARM: imx: Check return value of devm_kasprintf in imx_mmdc_perf_init
  arm64: dts: imx8ulp: update gpio node name to align with register address
  arm64: dts: imx93: update gpio node name to align with register address
  arm64: dts: imx93: correct mediamix power
  arm64: dts: imx8qm: Add imx8qm's own pm to avoid panic during startup
  arm64: dts: freescale: imx8-ss-dma: Fix #pwm-cells
  arm64: dts: freescale: imx8-ss-lsio: Fix #pwm-cells
  dt-bindings: pwm: imx-pwm: Unify #pwm-cells for all compatibles
  ARM: dts: imx6ul-pico: Describe the Ethernet PHY clock
  arm64: dts: imx8mp: imx8mq: Add parkmode-disable-ss-quirk on DWC3
  ARM: dts: imx6q: skov: fix ethernet clock regression
  arm64: dt: imx93: tqma9352-mba93xxla: Fix LPUART2 pad config

Link: https://lore.kernel.org/r/20231207005202.GF270430@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2023-12-07 17:36:34 +01:00
Krzysztof Kozlowski
08105d9a54 dt-bindings: arm: qcom-soc: extend pattern for matching existing SoCs
Add missing QDU, QRU and SDA platform names to the pattern matching all
Qualcomm compatibles.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20231120100617.47156-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:35:37 -08:00
Rajendra Nayak
b3cf69a435 soc: qcom: llcc: Add configuration data for X1E80100
Add LLCC configuration data for X1E80100 SoC.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231117095315.2087-3-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:33:30 -08:00
Rajendra Nayak
e9ceb595c2 dt-bindings: cache: qcom,llcc: Add X1E80100 compatible
Add the compatible for X1E80100 platforms.

Signed-off-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Co-developed-by: Sibi Sankar <quic_sibis@quicinc.com>
Signed-off-by: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231117095315.2087-2-quic_sibis@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:33:02 -08:00
Rohit Agarwal
a8db1c061f arm64: dts: qcom: sdx75-idp: Enable USB3 and PHY support
Enable the support for USB3 controller, QMP PHY and HS PHY
on SDX75 IDP.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231117080737.606687-4-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:32:10 -08:00
Rohit Agarwal
f47303a8d0 arm64: dts: qcom: Add USB3 and PHY support on SDX75
Add devicetree nodes for enabling USB3 controller, Qcom QMP PHY and
HS PHY on SDX75.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231117080737.606687-3-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:32:10 -08:00
Rohit Agarwal
ea72a527bd arm64: dts: qcom: Add interconnect nodes for SDX75
Add interconnect nodes to support interconnects on SDX75.
Also parallely add the interconnect property for UART required
so that the bootup to shell does not break with interconnects
in place.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231117080737.606687-2-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:32:10 -08:00
Rohit Agarwal
3515c3172f arm64: defconfig: Enable GCC, pinctrl and interconnect for SDX75
Enable Global Clock controller, pinctrl and interconnect framework
support for Qualcomm's SDX75 SoC which is required to boot to
console on sdx75-idp platform.

Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231117055849.534671-1-quic_rohiagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:31:38 -08:00
Nia Espera
54ee322f84 arm64: dts: qcom: sm8350: Fix remoteproc interrupt type
In a similar vein to
https://lore.kernel.org/lkml/20220530080842.37024-3-manivannan.sadhasivam@linaro.org/,
the remote processors on sm8350 fail to initialize with the 'correct'
(i.e., specified in downstream) IRQ type. Change this to EDGE_RISING.

Signed-off-by: Nia Espera <nespera@igalia.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-4-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:27:28 -08:00
Nia Espera
e705377171 arm64: dts: qcom: pm8350k: Remove hanging whitespace
pmk8350 has a random tab character inserted, so remove it.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nia Espera <nespera@igalia.com>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-3-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:27:28 -08:00
Nia Espera
01a9e9eb6c arm64: dts: qcom: sm8350: Fix DMA0 address
DMA0 node downstream is specified at 0x900000, so fix the typo. Without
this, enabling any i2c node using DMA0 causes a hang.

Fixes: bc08fbf49b ("arm64: dts: qcom: sm8350: Define GPI DMA engines")
Fixes: 41d6bca799 ("arm64: dts: qcom: sm8350: correct DMA controller unit address")
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Nia Espera <nespera@igalia.com>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-2-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:27:28 -08:00
Nia Espera
7bf421f445 dt-bindings: iio: adc: qcom: Add Qualcomm smb139x
Bindings for a charger controller chip found on sm8350

Signed-off-by: Nia Espera <nespera@igalia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231111-nia-sm8350-for-upstream-v4-1-3a638b02eea5@igalia.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:27:28 -08:00
Amit Kumar Mahapatra
4d8ff6b099
spi: Add multi-cs memories support in SPI core
AMD-Xilinx GQSPI controller has two advanced mode that allows the
controller to consider two flashes as one single device.

One of these two mode is the parallel mode in which each byte of data is
stored in both devices, the even bits in the lower flash & the odd bits in
the upper flash. The byte split is automatically handled by the QSPI
controller.

The other mode is the stacked mode in which both the flashes share the
same SPI bus but each of the device contain half of the data. In this mode,
the controller does not follow CS requests but instead internally wires the
two CS levels with the value of the most significant address bit.

For supporting both these modes SPI core need to be updated for providing
multiple CS for a single SPI device.

For adding multi CS support the SPI device need to be aware of all the CS
values. So, the "chip_select" member in the spi_device structure is now an
array that holds all the CS values.

spi_device structure now has a "cs_index_mask" member. This acts as an
index to the chip_select array. If nth bit of spi->cs_index_mask is set
then the driver would assert spi->chip_select[n].

In parallel mode all the chip selects are asserted/de-asserted
simultaneously and each byte of data is stored in both devices, the even
bits in one, the odd bits in the other. The split is automatically handled
by the GQSPI controller. The GQSPI controller supports a maximum of two
flashes connected in parallel mode. A SPI_CONTROLLER_MULTI_CS flag bit is
added in the spi controller flags, through ctlr->flags the spi core
will make sure that the controller is capable of handling multiple chip
selects at once.

For supporting multiple CS via GPIO the cs_gpiod member of the spi_device
structure is now an array that holds the gpio descriptor for each
chipselect.

CS GPIO is not tested on our hardware, but it has been tested by @Stefan
https://lore.kernel.org/all/005001da1efc$619ad5a0$24d080e0$@opensource.cirrus.com/

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Tested-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20231125092137.2948-4-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-07 16:23:20 +00:00
Amit Kumar Mahapatra
f05e2f61fe
ALSA: hda/cs35l56: Use set/get APIs to access spi->chip_select
In preparation for adding multiple CS support for a device, set/get
functions were introduces accessing spi->chip_select in
'commit 303feb3cc0 ("spi: Add APIs in spi core to set/get
spi->chip_select and spi->cs_gpiod")'.
Replace spi->chip_select with spi_get_chipselect() API.

Signed-off-by: Amit Kumar Mahapatra <amit.kumar-mahapatra@amd.com>
Link: https://lore.kernel.org/r/20231125092137.2948-3-amit.kumar-mahapatra@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2023-12-07 16:23:19 +00:00
Krzysztof Kozlowski
cdecce12d5 arm64: dts: qcom: sc8180x: align APSS with bindings
SC8180x APSS Devicetree bindings expect qcom,sc8180x-apss-shared to use
qcom,sdm845-apss-shared fallback:

  sc8180x-lenovo-flex-5g.dtb: mailbox@17c00000: compatible: 'oneOf' conditional failed, one must be fixed:
    ['qcom,sc8180x-apss-shared'] is too short

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111204725.35707-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:22:56 -08:00
Krzysztof Kozlowski
0d10ac7d2d arm64: dts: qcom: sm6375-pdx225: add fixed touchscreen AVDD regulator
The Samsung S6SY761 touchscreen bindings expect AVDD regulator which is
missing in the Sony Xperia PDX225 DTS.  There is however pinctrl setting
for in the touchscreen device node with similar name: "avdd", so assume
author wanted to control a fixed regulator with a GPIO.

This fixes dtbs_check warning:

  sm6375-sony-xperia-murray-pdx225.dtb: touchscreen@48: 'avdd-supply' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:22:48 -08:00
Krzysztof Kozlowski
67e4656f44 arm64: dts: qcom: sm6125: add interrupts to DWC3 USB controller
Add interrupts to SM6125 DWC3 USB controller, based on downstream/vendor
code of Trinket DTSI from Xiaomi Laurel device, to fix dtbs_check
warnings:

  sm6125-xiaomi-laurel-sprout.dtb: usb@4ef8800: 'interrupt-names' is a required property
  sm6125-xiaomi-laurel-sprout.dtb: usb@4ef8800: 'oneOf' conditional failed, one must be fixed:
    'interrupts' is a required property
    'interrupts-extended' is a required property

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes: cff4bbaf2a ("arm64: dts: qcom: Add support for SM6125")
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Link: https://lore.kernel.org/r/20231111164229.63803-5-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:22:48 -08:00
Krzysztof Kozlowski
f52f11271d arm64: dts: qcom: sm6115: align mem timer size cells with bindings
Commit 70d1e09ebf ("arm64: dts: qcom: sm6115: Use 64 bit addressing")
converted all addresses to 64-bit addressing, but the ARMv7 memory
mapped architected timer bindings expect sizes up to 32-bit.  Keep
64-bit addressing but change size of memory mapping to 32-bit
(size-cells=1) and adjust the ranges to match this.

This fixes dtbs_check warnings like:

  sm6115p-lenovo-j606f.dtb: timer@f120000: #size-cells:0:0: 1 was expected

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:22:48 -08:00
Krzysztof Kozlowski
af6f6778d3 arm64: dts: qcom: sm8150: use 'gpios' suffix for PCI GPIOs
Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':

  sa8155p-adp.dtb: pci@1c00000: Unevaluated properties are not allowed ('perst-gpio' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:22:48 -08:00
Krzysztof Kozlowski
9a1bd36aeb arm64: dts: qcom: sc8180x-primus: use 'gpios' suffix for PCI GPIOs
Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':

  sc8180x-primus.dtb: pci@1c10000: Unevaluated properties are not allowed ('perst-gpio', 'wake-gpio' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:22:48 -08:00
Krzysztof Kozlowski
fdff2141be arm64: dts: qcom: sc8180x-flex-5g: use 'gpios' suffix for PCI GPIOs
Linux handles both versions, but bindings expect GPIO properties to
have 'gpios' suffix instead of 'gpio':

  sc8180x-lenovo-flex-5g.dtb: pci@1c08000: Unevaluated properties are not allowed ('perst-gpio', 'wake-gpio' were unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111164229.63803-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:22:48 -08:00
Ping-Ke Shih
db7fac15ea wifi: rtw89: mac: refine SER setting during WiFi CPU power on
Don't enable firmware debug mode to prevent SER flow stuck due to fail
to reset payload buffer, and clear HALT_C2H_INT to avoid handling
unexpected interrupt at beginning.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231204080751.15354-6-pkshih@realtek.com
2023-12-07 18:22:12 +02:00
Chia-Yuan Li
6f8d36552b wifi: rtw89: 8922a: dump MAC registers when SER occurs
To diagnose the reason why firmware or hardware get abnormal, add to dump
MAC registers related to counters and interrupt masks. With these values,
people can classify problems and check if registers values are unexpected,
and then correct them. However, it could possible false alarm because
firmware triggers this SER event by wrong conditions that we should
correct it at firmware or register settings.

In field, SER might happen under special conditions, and very hard to
happen again, so dump lots of registers to provide rich information to
catch the problem.

Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231204080751.15354-5-pkshih@realtek.com
2023-12-07 18:22:12 +02:00
Ping-Ke Shih
eeb8cbb58b wifi: rtw89: 8922a: add SER IMR tables
To activate SER (system error recovery) in firmware, we have to configure
IMR to trigger interrupts, and then SER can check registers to know if it
need to reset hardware or notify driver to re-configure whole settings.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231204080751.15354-4-pkshih@realtek.com
2023-12-07 18:22:12 +02:00
Zong-Zhe Yang
2a68a27cd2 wifi: rtw89: fw: extend program counter dump for Wi-Fi 7 chip
Extend FW program counter dump for Wi-Fi 7 chip.
They poll different addresses.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231204080751.15354-3-pkshih@realtek.com
2023-12-07 18:22:12 +02:00
Zong-Zhe Yang
c5ece8d843 wifi: rtw89: 8922a: configure CRASH_TRIGGER FW feature
RTL8922A FW supports CRASH_TRIGGER feature from v0.34.30.0.
After it, debugfs fw_crash can accept type 1 on RTL8922A to
trigger firmware crash and verify L2 recovery.

Besides, RTL8922A sync address offset of reserved payload engine.
And, SER (system error recovery) tweaks conversion from WCPU address
to indirect access address for RTL8922A. The new conversion works
for all supported chips.

Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231204080751.15354-2-pkshih@realtek.com
2023-12-07 18:22:12 +02:00
Krzysztof Kozlowski
74eed6f467 arm64: dts: qcom: sdm845: correct Soundwire node name
Soundwire Devicetree bindings expect the Soundwire controller device
node to be named just "soundwire":

  sdm845-db845c.dtb: swm@c85: $nodename:0: 'swm@c85' does not match '^soundwire(@.*)?$'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20231111095617.16496-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:21:17 -08:00
Krzysztof Kozlowski
0c90c75e66 arm64: dts: qcom: sdm845-db845c: correct LED panic indicator
There is no "panic-indicator" default trigger but a property with that
name:

  sdm845-db845c.dtb: leds: led-0: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected)

Fixes: 3f72e2d3e6 ("arm64: dts: qcom: Add Dragonboard 845c")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111095617.16496-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:21:17 -08:00
Krzysztof Kozlowski
dc6b5562ac arm64: dts: qcom: qrb5165-rb5: correct LED panic indicator
There is no "panic-indicator" default trigger but a property with that
name:

  qrb5165-rb5.dtb: leds: led-user4: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected)

Fixes: b5cbd84e49 ("arm64: dts: qcom: qrb5165-rb5: Add onboard LED support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231111094623.12476-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2023-12-07 08:20:07 -08:00