The IEP module supports compare events, in which a value is written to a
hardware register and when the IEP counter reaches the written value an
interrupt is generated. Add handling for this interrupt in order to
support PPS events.
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The IEP interrupt is used in order to support both capture events, where
an incoming external signal gets timestamped on arrival, and compare
events, where an interrupt is generated internally when the IEP counter
reaches a programmed value.
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As all sources of concurrency in hardware register access occur in
non-interrupt context eliminate spinlock-based synchronization and
rely on the mutex-based synchronization that is already present.
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable PTP support for AM65x SR1.0 devices by registering with the IEP
infrastructure in order to expose a PTP clock to userspace.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Heng Qi says:
====================
virtio_net: fixes for checksum offloading and XDP handling
This series of patches aim to address two specific issues identified
in the virtio_net driver related to checksum offloading and XDP
processing of fully checksummed packets.
The first patch corrects the handling of checksum offloading in the
driver. The second patch addresses an issue where the XDP program had
no trouble with fully checksummed packets.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The XDP program can't correctly handle partially checksummed
packets, but works fine with fully checksummed packets. If the
device has already validated fully checksummed packets, then
the driver doesn't need to re-validate them, saving CPU resources.
Additionally, the driver does not drop all partially checksummed
packets when VIRTIO_NET_F_GUEST_CSUM is not negotiated. This is
not a bug, as the driver has always done this.
Fixes: 436c9453a1 ("virtio-net: keep vnet header zeroed after processing XDP")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In virtio spec 0.95, VIRTIO_NET_F_GUEST_CSUM was designed to handle
partially checksummed packets, and the validation of fully checksummed
packets by the device is independent of VIRTIO_NET_F_GUEST_CSUM
negotiation. However, the specification erroneously stated:
"If VIRTIO_NET_F_GUEST_CSUM is not negotiated, the device MUST set flags
to zero and SHOULD supply a fully checksummed packet to the driver."
This statement is inaccurate because even without VIRTIO_NET_F_GUEST_CSUM
negotiation, the device can still set the VIRTIO_NET_HDR_F_DATA_VALID flag.
Essentially, the device can facilitate the validation of these packets'
checksums - a process known as RX checksum offloading - removing the need
for the driver to do so.
This scenario is currently not implemented in the driver and requires
correction. The necessary specification correction[1] has been made and
approved in the virtio TC vote.
[1] https://lists.oasis-open.org/archives/virtio-comment/202401/msg00011.html
Fixes: 4f49129be6 ("virtio-net: Set RXCSUM feature if GUEST_CSUM is available")
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
After ecf848eb93 ("net: usb: ax88179_178a: fix link status when link is
set to down/up") to not reset from usbnet_open after the reset from
usbnet_probe at initialization stage to speed up this, some issues have
been reported.
It seems to happen that if the initialization is slower, and some time
passes between the probe operation and the open operation, the second reset
from open is necessary too to have the device working. The reason is that
if there is no activity with the phy, this is "disconnected".
In order to improve this, the solution is to detect when the phy is
"disconnected", and we can use the phy status register for this. So we will
only reset the device from reset operation in this situation, that is, only
if necessary.
The same bahavior is happening when the device is stopped (link set to
down) and later is restarted (link set to up), so if the phy keeps working
we only need to enable the mac again, but if enough time passes between the
device stop and restart, reset is necessary, and we can detect the
situation checking the phy status register too.
cc: stable@vger.kernel.org # 6.6+
Fixes: ecf848eb93 ("net: usb: ax88179_178a: fix link status when link is set to down/up")
Reported-by: Yongqin Liu <yongqin.liu@linaro.org>
Reported-by: Antje Miederhöfer <a.miederhoefer@gmx.de>
Reported-by: Arne Fitzenreiter <arne_f@ipfire.org>
Tested-by: Yongqin Liu <yongqin.liu@linaro.org>
Tested-by: Antje Miederhöfer <a.miederhoefer@gmx.de>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Hongfu Li <lihongfu@kylinos.cn>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit
6791e0ea30 ("x86/resctrl: Access per-rmid structures by index")
adds logic to map individual monitoring groups into a global index space used
for tracking allocated RMIDs.
Attempts to free the default RMID are ignored in free_rmid(), and this works
fine on x86.
With arm64 MPAM, there is a latent bug here however: on platforms with no
monitors exposed through resctrl, each control group still gets a different
monitoring group ID as seen by the hardware, since the CLOSID always forms part
of the monitoring group ID.
This means that when removing a control group, the code may try to free this
group's default monitoring group RMID for real. If there are no monitors
however, the RMID tracking table rmid_ptrs[] would be a waste of memory and is
never allocated, leading to a splat when free_rmid() tries to dereference the
table.
One option would be to treat RMID 0 as special for every CLOSID, but this would
be ugly since bookkeeping still needs to be done for these monitoring group IDs
when there are monitors present in the hardware.
Instead, add a gating check of resctrl_arch_mon_capable() in free_rmid(), and
just do nothing if the hardware doesn't have monitors.
This fix mirrors the gating checks already present in
mkdir_rdt_prepare_rmid_alloc() and elsewhere.
No functional change on x86.
[ bp: Massage commit message. ]
Fixes: 6791e0ea30 ("x86/resctrl: Access per-rmid structures by index")
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lore.kernel.org/r/20240618140152.83154-1-Dave.Martin@arm.com
simple_bridge_probe() calls drm_bridge_add()
Thus, drm_bridge_remove() must be called in the remove() callback.
If we call devm_drm_bridge_add() instead, then drm_bridge_remove()
will be called automatically at device release, and the remove()
callback is no longer required.
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618-devm-simple-bridge-v1-1-c7ed8a09fcc5@freebox.fr
Of course, userspace is in the driver's seat for struct kvm and
associated allocations. Make sure the sysreg_masks allocation
participates in kmem accounting.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240617181018.2054332-1-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Latest kid on the block: NXS (Non-eXtra-Slow) TLBI operations.
Let's add those in bulk (NSH, ISH, OSH, both normal and range)
as they directly map to their XS (the standard ones) counterparts.
Not a lot to say about them, they are basically useless.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-17-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
We already support some form of range operation by handling FEAT_TTL,
but so far the "arbitrary" range operations are unsupported.
Let's fix that.
For EL2 S1, this is simple enough: we just map both NSH, ISH and OSH
instructions onto the ISH version for EL1.
For TLBI instructions affecting EL1 S1, we use the same model as
their non-range counterpart to invalidate in the context of the
correct VMID.
For TLBI instructions affecting S2, we interpret the data passed
by the guest to compute the range and use that to tear-down part
of the shadow S2 range and invalidate the TLBs.
Finally, we advertise FEAT_TLBIRANGE if the host supports it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-16-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Our handling of outer-shareable TLBIs is pretty basic: we just
map them to the existing inner-shareable ones, because we really
don't have anything else.
The only significant change is that we can now advertise FEAT_TLBIOS
support if the host supports it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-15-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In order to be able to make S2 TLB invalidations more performant on NV,
let's use a scheme derived from the FEAT_TTL extension.
If bits [56:55] in the leaf descriptor translating the address in the
corresponding shadow S2 are non-zero, they indicate a level which can
be used as an invalidation range. This allows further reduction of the
systematic over-invalidation that takes place otherwise.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-14-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Populate bits [56:55] of the leaf entry with the level provided
by the guest's S2 translation. This will allow us to better scope
the invalidation by remembering the mapping size.
Of course, this assume that the guest will issue an invalidation
with an address that falls into the same leaf. If the guest doesn't,
we'll over-invalidate.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-13-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Support guest-provided information information to size the range of
required invalidation. This helps with reducing over-invalidation,
provided that the guest actually provides accurate information.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-12-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
TLBI IPAS2E1* are the last class of TLBI instructions we need
to handle. For each matching S2 MMU context, we invalidate a
range corresponding to the largest possible mapping for that
context.
At this stage, we don't handle TTL, which means we are likely
over-invalidating. Further patches will aim at making this
a bit better.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-11-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
TLBI ALLE1* is a pretty big hammer that invalides all S1/S2 TLBs.
This translates into the unmapping of all our shadow S2 PTs, itself
resulting in the corresponding TLB invalidations.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-10-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Emulating TLBI VMALLS12E1* results in tearing down all the shadow
S2 PTs that match the current VMID, since our shadow S2s are just
some form of SW-managed TLBs. That teardown itself results in a
full TLB invalidation for both S1 and S2.
This can result in over-invalidation if two vcpus use the same VMID
to tag private S2 PTs, but this is still correct from an architecture
perspective.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-9-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
While dealing with TLB invalidation targeting the guest hypervisor's
own stage-1 was easy, doing the same thing for its own guests is
a bit more involved.
Since such an invalidation is scoped by VMID, it needs to apply to
all s2_mmu contexts that have been tagged by that VMID, irrespective
of the value of VTTBR_EL2.BADDR.
So for each s2_mmu context matching that VMID, we invalidate the
corresponding TLBs, each context having its own "physical" VMID.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-8-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Due to the way FEAT_NV2 suppresses traps when accessing EL2
system registers, we can't track when the guest changes its
HCR_EL2.TGE setting. This means we always trap EL1 TLBIs,
even if they don't affect any L2 guest.
Given that invalidating the EL2 TLBs doesn't require any messing
with the shadow stage-2 page-tables, we can simply emulate the
instructions early and return directly to the guest.
This is conditioned on the instruction being an EL1 one and
the guest's HCR_EL2.{E2H,TGE} being {1,1} (indicating that
the instruction targets the EL2 S1 TLBs), or the instruction
being one of the EL2 ones (which are not ambiguous).
EL1 TLBIs issued with HCR_EL2.{E2H,TGE}={1,0} are not handled
here, and cause a full exit so that they can be handled in
the context of a VMID.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-7-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Provide the primitives required to handle TLB invalidation for
Stage-1 EL2 TLBs, which by definition do not require messing
with the Stage-2 page tables.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-6-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Unmap/flush shadow stage 2 page tables for the nested VMs as well as the
stage 2 page table for the guest hypervisor.
Note: A bunch of the code in mmu.c relating to MMU notifiers is
currently dealt with in an extremely abrupt way, for example by clearing
out an entire shadow stage-2 table. This will be handled in a more
efficient way using the reverse mapping feature in a later version of
the patch series.
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-5-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
If we are faulting on a shadow stage 2 translation, we first walk the
guest hypervisor's stage 2 page table to see if it has a mapping. If
not, we inject a stage 2 page fault to the virtual EL2. Otherwise, we
create a mapping in the shadow stage 2 page table.
Note that we have to deal with two IPAs when we got a shadow stage 2
page fault. One is the address we faulted on, and is in the L2 guest
phys space. The other is from the guest stage-2 page table walk, and is
in the L1 guest phys space. To differentiate them, we rename variables
so that fault_ipa is used for the former and ipa is used for the latter.
When mapping a page in a shadow stage-2, special care must be taken not
to be more permissive than the guest is.
Co-developed-by: Christoffer Dall <christoffer.dall@linaro.org>
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-4-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Based on the pseudo-code in the ARM ARM, implement a stage 2 software
page table walker.
Co-developed-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Jintack Lim <jintack.lim@linaro.org>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Add Stage-2 mmu data structures for virtual EL2 and for nested guests.
We don't yet populate shadow Stage-2 page tables, but we now have a
framework for getting to a shadow Stage-2 pgd.
We allocate twice the number of vcpus as Stage-2 mmu structures because
that's sufficient for each vcpu running two translation regimes without
having to flush the Stage-2 page tables.
Co-developed-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240614144552.2773592-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
In order to allow for requesting a memory region that can be used for
things like pstore on multiple machines where the memory layout is not the
same, add a new option to the kernel command line called "reserve_mem".
The format is: reserve_mem=nn:align:name
Where it will find nn amount of memory at the given alignment of align.
The name field is to allow another subsystem to retrieve where the memory
was found. For example:
reserve_mem=12M:4096:oops ramoops.mem_name=oops
Where ramoops.mem_name will tell ramoops that memory was reserved for it
via the reserve_mem option and it can find it by calling:
if (reserve_mem_find_by_name("oops", &start, &size)) {
// start holds the start address and size holds the size given
This is typically used for systems that do not wipe the RAM, and this
command line will try to reserve the same physical memory on soft reboots.
Note, it is not guaranteed to be the same location. For example, if KASLR
places the kernel at the location of where the RAM reservation was from a
previous boot, the new reservation will be at a different location. Any
subsystem using this feature must add a way to verify that the contents of
the physical memory is from a previous boot, as there may be cases where
the memory will not be located at the same location.
Not all systems may work either. There could be bit flips if the reboot
goes through the BIOS. Using kexec to reboot the machine is likely to
have better results in such cases.
Link: https://lore.kernel.org/all/ZjJVnZUX3NZiGW6q@kernel.org/
Suggested-by: Mike Rapoport <rppt@kernel.org>
Tested-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240613155527.437020271@goodmis.org
Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org>
This reverts commit f3c2031db7.
We want to notice possible issues faced with PSR2 Region Early Transport as
early as possible -> let's revert patch disabling Region Early Transport by
default. Also eDP 1.5 Panel Replay requires Early Transport.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618053026.3268759-9-jouni.hogander@intel.com
Add new debug bit to be used with i915_edp_psr_debug debugfs
interface. This can be used to disable Panel Replay.
v2: ensure that fastset is performed when the bit changes
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618053026.3268759-8-jouni.hogander@intel.com
Currently PSR2 SU Region Early Transport is enabled by default on Lunarlake
if panel supports it despite enable_psr module parameter value. This patch
makes it possible for user to limit used PSR mode and prevent SU Region
Early Transport by setting enable_psr as 2. With default (-1) PSR2 SU
Region Early Transport is allowed.
v2: fix/improve commit desciption
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618053026.3268759-6-jouni.hogander@intel.com
If user is specifically limiting PSR mode to PSR1 or PSR2: disable Panel
Replay. With default value -1 all modes are allowed including Panel
Replay. Disabling PSR using value 0 disables Panel Replay as well.
Also own compute config helper is added for Panel Replay. This makes sense
because number of Panel Replay specific checks are increasing.
v2: Squash adding Panel Replay compute config helper
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240618053026.3268759-5-jouni.hogander@intel.com
Use the FIELD_GET() macro instead of open coding the masks and shifts.
This makes the code more compact and improves readability as it avoids
the need to wrap excessively long lines.
Signed-off-by: Aapo Vienamo <aapo.vienamo@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Yehezkel Bernat <YehezkelShB@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Since commit 2282679fb2 ("mm: submit multipage write for SWP_FS_OPS
swap-space"), we can plug multiple pages then unplug them all together.
That means iov_iter_count(iter) could be way bigger than PAGE_SIZE, it
actually equals the size of iov_iter_npages(iter, INT_MAX).
Note this issue has nothing to do with large folios as we don't support
THP_SWPOUT to non-block devices.
Fixes: 2282679fb2 ("mm: submit multipage write for SWP_FS_OPS swap-space")
Reported-by: Christoph Hellwig <hch@lst.de>
Closes: https://lore.kernel.org/linux-mm/20240614100329.1203579-1-hch@lst.de/
Cc: NeilBrown <neilb@suse.de>
Cc: Anna Schumaker <anna@kernel.org>
Cc: Steve French <sfrench@samba.org>
Cc: Trond Myklebust <trondmy@kernel.org>
Cc: Chuanhua Han <hanchuanhua@oppo.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Paulo Alcantara <pc@manguebit.com>
Cc: Ronnie Sahlberg <ronniesahlberg@gmail.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Bharath SM <bharathsm@microsoft.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Support for the Allwinner H618, H618 and H700 was added to the sun50i
cpufreq-nvmem driver recently [1] however at the time some operating
points supported by the H700 (1.008, 1.032 and 1.512 GHz) and in use by
vendor BSPs were found to be unstable during testing, so the H700 speed
bin and the 1.032 GHz OPP were not included in the mainline driver.
Retesting with kernel 6.10rc2 (which carries additional fixes for the
driver) now shows stable operation with these points.
Add the H700 speed bin to the driver.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
--
[1] https://lore.kernel.org/linux-sunxi/20240418154408.1740047-1-andre.przywara@arm.com
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The SPD5118 specification says, in its documentation of the page bits
in the MR11 register:
"
This register only applies to non-volatile memory (1024) Bytes) access of
SPD5 Hub device.
For volatile memory access, this register must be programmed to '000'.
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
"
Renesas/ITD SPD5118 hub controllers take this literally and disable access
to volatile memory if the page selected in MR11 is != 0. Since the BIOS or
ROMMON will access the non-volatile memory and likely select a page != 0,
this means that the driver will not instantiate since it can not identify
the chip. Even if the driver instantiates, access to volatile registers
is blocked after a nvram read operation which selects a page other than 0.
To solve the problem, add initialization code to select page 0 during
probe. Before doing that, use basic validation to ensure that this is
really a SPD5118 device and not some random EEPROM.
Cc: Sasha Kozachuk <skozachuk@google.com>
Cc: John Hamrick <johnham@google.com>
Cc: Chris Sarra <chrissarra@google.com>
Tested-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Using regmap for paging significantly improves caching since the regmap
cache no longer needs to be cleared after changing the page, so let's
use it.
Suggested-by: Armin Wolf <W_Armin@gmx.de>
Tested-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
As defined by the MANA Hardware spec, the queue size for DMA is 4KB
minimal, and power of 2. And, the HWC queue size has to be exactly
4KB.
To support page sizes other than 4KB on ARM64, define the minimal
queue size as a macro separately from the PAGE_SIZE, which we always
assumed it to be 4KB before supporting ARM64.
Also, add MANA specific macros and update code related to size
alignment, DMA region calculations, etc.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/1718655446-6576-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kamal Heib says:
====================
net/mlx4_en: Use ethtool_puts/sprintf
This patchset updates the mlx4_en driver to use the ethtool_puts and
ethtool_sprintf helper functions.
Signed-off-by: Kamal Heib <kheib@redhat.com>
====================
Link: https://lore.kernel.org/r/20240617172329.239819-1-kheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the ethtool_puts/ethtool_sprintf helper to print the stats strings
into the ethtool strings interface.
Signed-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240617172329.239819-4-kheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the ethtool_puts helper to print the selftest strings into the
ethtool strings interface.
Signed-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240617172329.239819-3-kheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the ethtool_puts helper to print the priv flags strings into the
ethtool strings interface.
Signed-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240617172329.239819-2-kheib@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
commit be27b89652 ("net: stmmac: replace priv->speed with
the portTransmitRate from the tc-cbs parameters") introduced
a problem. When deleting, it prompts "Invalid portTransmitRate
0 (idleSlope - sendSlope)" and exits. Add judgment on cbs.enable.
Only when offload is enabled, speed divider needs to be calculated.
Fixes: be27b89652 ("net: stmmac: replace priv->speed with the portTransmitRate from the tc-cbs parameters")
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240617013922.1035854-1-xiaolei.wang@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
