While we list the "IRQ status *and acknowledge*" registers as volatile
in the MFD description, they are missing from the writable range array,
so acknowledging any interrupts was met with an -EIO error.
This error propagates up, leading to the whole AXP717 driver failing to
probe, which is fatal to most systems using this PMIC, since most
peripherals refer one of the PMIC voltage rails.
This wasn't noticed on the initial submission, since the interrupt was
completely missing at this point, but the DTs now merged describe the
interrupt, creating the problem.
Add the five registers that hold those bits to the writable array.
This fixes the boot on the Anbernic systems using the AXP717 PMIC.
Fixes: b5bfc8ab24 ("mfd: axp20x: Add support for AXP717 PMIC")
Reported-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: John Watts <contact@jookia.org>
Link: https://lore.kernel.org/r/20240613233104.17529-1-andre.przywara@arm.com
Signed-off-by: Lee Jones <lee@kernel.org>
In order to be able to use the proper register macros instead of the
underscore prefixed ones, pass i915_reg_t for the calc_index()
parameters.
Side note: DSPSURF is really about planes, not pipes. Fixed stride
doesn't work for plane C for CHV (but that's okay for gvt). This doesn't
support planes beyond C either. But all that is unrelated to the change
at hand.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.wang.linux@gmail.com>
Cc: intel-gvt-dev@lists.freedesktop.org
Reviewed-by: Zhi Wang <zhiwang@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/282b19c44d83c96b52c261cfc7218e7e54076cba.1717773890.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This patch provides support for sending supervision HSR frames with
MAC addresses stored in ProxyNodeTable when RedBox (i.e. HSR-SAN) is
enabled.
Supervision frames with RedBox MAC address (appended as second TLV)
are only send for ProxyNodeTable nodes.
This patch series shall be tested with hsr_redbox.sh script.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As the comment in this function says, the code currently just clears the
CIPSO part with IPOPT_NOP, rather than removing it completely and
trimming the packet. The other cipso_v4_*_delattr() functions, however,
do the proper removal and also calipso_skbuff_delattr() makes an effort
to remove the CALIPSO options instead of replacing them with padding.
Some routers treat IPv4 packets with anything (even NOPs) in the option
header as a special case and take them through a slower processing path.
Consequently, hardening guides such as STIG recommend to configure such
routers to drop packets with non-empty IP option headers [1][2]. Thus,
users might expect NetLabel to produce packets with minimal padding (or
at least with no padding when no actual options are present).
Implement the proper option removal to address this and to be closer to
what the peer functions do.
[1] https://www.stigviewer.com/stig/juniper_router_rtr/2019-09-27/finding/V-90937
[2] https://www.stigviewer.com/stig/cisco_ios_xe_router_rtr/2021-03-26/finding/V-217001
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
As evident from the definition of ip_options_get(), the IP option
IPOPT_END is used to pad the IP option data array, not IPOPT_NOP. Yet
the loop that walks the IP options to determine the total IP options
length in cipso_v4_delopt() doesn't take IPOPT_END into account.
Fix it by recognizing the IPOPT_END value as the end of actual options.
Fixes: 014ab19a69 ("selinux: Set socket NetLabel based on connection endpoint")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The new HW is more power efficient and there is no
need to enter the D0i3/D3 so quickly. Increasing
autosuspend delay reduces latency in certain usage
scenarios.
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-14-jacek.lawrynowicz@linux.intel.com
The gpio_suffixes array is defined in the gpiolib.h header. This means
the array is stored in .rodata of every compilation unit that includes
it. Put the definition for the array in gpiolib.c and export just the
symbol in the header. We need the size of the array so expose it too.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/r/20240612184821.58053-1-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Add new test mode flag that will disable all timeouts
defined in timeout fields of struct ivpu_device.
Remove also reschedule_suspend field as it is unused.
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-11-jacek.lawrynowicz@linux.intel.com
Implement setting specified buffer ranges as read-only.
In case if specified range is not 64K aligned and 64K contiguous
MMU600 pages are turned on, split 64K mapping to allow 4K granularity
for read-only configuration.
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-10-jacek.lawrynowicz@linux.intel.com
When host system is under heavy load and the NPU is already running
on the lowest frequency, PUNIT may request Duty Cycle Throttling (DCT).
This will further reduce NPU power usage.
PUNIT requests DCT mode using Survabilty IRQ and mailbox register.
The driver then issues a JSM message to the FW that enables
the DCT mode. If the NPU resets while in DCT mode, the driver request
DCT mode during FW boot.
Also add debugfs "dct" file that allows to set arbitrary DCT percentage,
which is used by driver tests.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Wachowski, Karol <karol.wachowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-7-jacek.lawrynowicz@linux.intel.com
It is required to disable NPU clock relinquish for the time
of MMIO reset. Clock relinquish gets into default (enabled)
state after MMIO reset is performed.
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-6-jacek.lawrynowicz@linux.intel.com
Abort all jobs that belong to contexts generating MMU faults in order
to avoid flooding host with MMU IRQs.
Jobs are cancelled with:
- SSID_RELEASE command when OS scheduling is enabled
- DESTROY_CMDQ command when HW scheduling is enabled
Signed-off-by: Maciej Falkowski <maciej.falkowski@intel.com>
Co-developed-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-3-jacek.lawrynowicz@linux.intel.com
Send workpoint 0 request during power up on 37xx.
This is needed in rare case where WP0 was not sent
during power down due to device hang.
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611120433.1012423-2-jacek.lawrynowicz@linux.intel.com
req->n_channels must be set before req->channels[] can be used.
This patch fixes one of the issues encountered in [1].
[ 83.964255] UBSAN: array-index-out-of-bounds in net/mac80211/scan.c:364:4
[ 83.964258] index 0 is out of range for type 'struct ieee80211_channel *[]'
[...]
[ 83.964264] Call Trace:
[ 83.964267] <TASK>
[ 83.964269] dump_stack_lvl+0x3f/0xc0
[ 83.964274] __ubsan_handle_out_of_bounds+0xec/0x110
[ 83.964278] ieee80211_prep_hw_scan+0x2db/0x4b0
[ 83.964281] __ieee80211_start_scan+0x601/0x990
[ 83.964291] nl80211_trigger_scan+0x874/0x980
[ 83.964295] genl_family_rcv_msg_doit+0xe8/0x160
[ 83.964298] genl_rcv_msg+0x240/0x270
[...]
[1] https://bugzilla.kernel.org/show_bug.cgi?id=218810
Co-authored-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Kenton Groombridge <concord@gentoo.org>
Link: https://msgid.link/20240605152218.236061-1-concord@gentoo.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since the debugfs functions have no-op stubs for CONFIG_DEBUG_FS=n,
the compiler will optimize the rest away since they are no longer referenced.
The benefit of removing the conditional compilation is that the build
is actually tested for both CONFIG_DEBUG_FS configuration values.
Assuming most developers have it enabled, CONFIG_DEBUG_FS=n is not tested
much and may fail the build due to the conditional compilation.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240606120842.1377267-1-pengfuyuan@kylinos.cn
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Add bindings for the clock generator of divider/mux and gates working
for other subsystem than RP subsystem for Sophgo SG2042.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Add bindings for the gate clocks of RP subsystem for Sophgo SG2042.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Add bindings for the pll clocks for Sophgo SG2042.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guo Ren <guoren@kernel.org>
The syzbot fuzzer found that the interrupt-URB completion callback in
the cdc-wdm driver was taking too long, and the driver's immediate
resubmission of interrupt URBs with -EPROTO status combined with the
dummy-hcd emulation to cause a CPU lockup:
cdc_wdm 1-1:1.0: nonzero urb status received: -71
cdc_wdm 1-1:1.0: wdm_int_callback - 0 bytes
watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [syz-executor782:6625]
CPU#0 Utilization every 4s during lockup:
#1: 98% system, 0% softirq, 3% hardirq, 0% idle
#2: 98% system, 0% softirq, 3% hardirq, 0% idle
#3: 98% system, 0% softirq, 3% hardirq, 0% idle
#4: 98% system, 0% softirq, 3% hardirq, 0% idle
#5: 98% system, 1% softirq, 3% hardirq, 0% idle
Modules linked in:
irq event stamp: 73096
hardirqs last enabled at (73095): [<ffff80008037bc00>] console_emit_next_record kernel/printk/printk.c:2935 [inline]
hardirqs last enabled at (73095): [<ffff80008037bc00>] console_flush_all+0x650/0xb74 kernel/printk/printk.c:2994
hardirqs last disabled at (73096): [<ffff80008af10b00>] __el1_irq arch/arm64/kernel/entry-common.c:533 [inline]
hardirqs last disabled at (73096): [<ffff80008af10b00>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:551
softirqs last enabled at (73048): [<ffff8000801ea530>] softirq_handle_end kernel/softirq.c:400 [inline]
softirqs last enabled at (73048): [<ffff8000801ea530>] handle_softirqs+0xa60/0xc34 kernel/softirq.c:582
softirqs last disabled at (73043): [<ffff800080020de8>] __do_softirq+0x14/0x20 kernel/softirq.c:588
CPU: 0 PID: 6625 Comm: syz-executor782 Tainted: G W 6.10.0-rc2-syzkaller-g8867bbd4a056 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/02/2024
Testing showed that the problem did not occur if the two error
messages -- the first two lines above -- were removed; apparently adding
material to the kernel log takes a surprisingly large amount of time.
In any case, the best approach for preventing these lockups and to
avoid spamming the log with thousands of error messages per second is
to ratelimit the two dev_err() calls. Therefore we replace them with
dev_err_ratelimited().
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Suggested-by: Greg KH <gregkh@linuxfoundation.org>
Reported-and-tested-by: syzbot+5f996b83575ef4058638@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/00000000000073d54b061a6a1c65@google.com/
Reported-and-tested-by: syzbot+1b2abad17596ad03dcff@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-usb/000000000000f45085061aa9b37e@google.com/
Fixes: 9908a32e94 ("USB: remove err() macro from usb class drivers")
Link: https://lore.kernel.org/linux-usb/40dfa45b-5f21-4eef-a8c1-51a2f320e267@rowland.harvard.edu/
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/29855215-52f5-4385-b058-91f42c2bee18@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The CENTERED_RECTANGLE define fails to compile on clang and old gcc
versions. Just drop it and fill in the crop rectangles explicitly.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
PowerPC has mixed case events matching legacy hardware cache
events. Warn but don't fail in this case. Event parsing will still
work in this case by matching the legacy case.
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Kajol Jain <kjain@linux.ibm.com>
Cc: James Clark <james.clark@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240612124027.2712643-1-irogers@google.com
perf bench futex fails as below and hangs intermittently when
attempted to run on on a powerpc system:
./perf bench futex wake-parallel
Running 'futex/wake-parallel' benchmark:
Run summary [PID 88588]: blocking on 640 threads (at [private] futex 0x10464b8c), 640 threads waking up 1 at a time.
[Run 1]: Avg per-thread latency (waking 1/640 threads) in 0.1309 ms (+-53.27%)
[Run 2]: Avg per-thread latency (waking 1/640 threads) in 0.0120 ms (+-31.16%)
[Run 3]: Avg per-thread latency (waking 1/640 threads) in 0.1474 ms (+-92.47%)
[Run 4]: Avg per-thread latency (waking 1/640 threads) in 0.2883 ms (+-67.75%)
[Run 5]: Avg per-thread latency (waking 1/640 threads) in 0.4108 ms (+-39.60%)
[Run 6]: Avg per-thread latency (waking 1/640 threads) in 0.7843 ms (+-78.98%)
perf: couldn't wakeup all tasks (0/1)
perf: couldn't wakeup all tasks (0/1)
perf: couldn't wakeup all tasks (0/1)
perf: couldn't wakeup all tasks (0/1)
perf: couldn't wakeup all tasks (0/1)
perf: couldn't wakeup all tasks (0/1)
In the system, where perf bench wake-up-parallel is has system
configuration of 640 cpus. After debugging, this turned out to be
a timing issue. The benchmark creates threads equal to number of
cpus and issues a futex_wait. Then it does a usleep for .1 second
before initiating futex_wake. In system configuration with more
threads, the usleep time is not enough. Patch changes the usleep
from 100000 to 200000
With the patch, ran multiple iterations and there were no issues
further seen
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240607044354.82225-3-atrajeev@linux.vnet.ibm.com
Perf bench epoll fails as below when attempted to run on
on a powerpc system:
./perf bench epoll wait
Running 'epoll/wait' benchmark:
Run summary [PID 627653]: 79 threads monitoring on 64 file-descriptors for 8 secs.
perf: pthread_create: No such file or directory
In the setup where this perf bench was ran, difference was that
partition had 640 CPU's, but not all CPUs were online. 80 CPUs
were online. While creating threads and using epoll_wait , code
sets the affinity using cpumask. The cpumask size used is 80
which is picked from "nrcpus = perf_cpu_map__nr(cpu)". Here the
benchmark reports fail while setting affinity for cpu number which
is greater than 80 or higher, because it attempts to set a bit
position which is not allocated on the cpumask. Fix this by changing
the size of cpumask to number of possible cpus and not the number
of online cpus.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240607044354.82225-2-atrajeev@linux.vnet.ibm.com
Perf bench futex fails as below when attempted to run on
on a powerpc system:
./perf bench futex all
Running futex/hash benchmark...
Run summary [PID 626307]: 80 threads, each operating on 1024 [private] futexes for 10 secs.
perf: pthread_create: No such file or directory
In the setup where this perf bench was ran, difference was that
partition had 640 CPU's, but not all CPUs were online. 80 CPUs
were online. While blocking the threads with futex_wait, code
sets the affinity using cpumask. The cpumask size used is 80
which is picked from "nrcpus = perf_cpu_map__nr(cpu)". Here the
benchmark reports fail while setting affinity for cpu number which
is greater than 80 or higher, because it attempts to set a bit
position which is not allocated on the cpumask. Fix this by changing
the size of cpumask to number of possible cpus and not the number
of online cpus.
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Disha Goel <disgoel@linux.ibm.com>
Cc: akanksha@linux.ibm.com
Cc: kjain@linux.ibm.com
Cc: maddy@linux.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20240607044354.82225-1-atrajeev@linux.vnet.ibm.com
cros_ec_lpc_mec_read_bytes and cros_ec_lpc_mec_write_bytes call
cros_ec_lpc_mec_in_range, which checks if addresses are in the MEC
address range, and returns -EINVAL if the range given is not sensible.
However cros_ec_lpc_mec_in_range was also returning -EINVAL for a zero
length range.
A zero length range should not be an error condition.
cros_ec_lpc_mec_in_range now returns 1 in this case.
cros_ec_lpc_io_bytes_mec checks for zero length, and returns
immediately without beginning a transfer.
Fixes: 68dbac0a58 ("platform/chrome: cros_ec_lpc: MEC access can return error code")
Fixes: 77a714325d ("platform/chrome: cros_ec_lpc: Fix error code in cros_ec_lpc_mec_read_bytes()")
Signed-off-by: Ben Walsh <ben@jubnut.com>
Link: https://lore.kernel.org/r/20240613212542.403-1-ben@jubnut.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
'prop_map' has been unused since the original
commit e5f8efa5c8 ("ARM: socfpga: fpga bridge driver support").
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Russ Weight <russ.weight@linux.dev>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20240530205245.125513-1-linux@treblig.org
Signed-off-by: Xu Yilun <yilun.xu@linux.intel.com>
Only the current owner of a request is allowed to write into req->flags.
Hence, the cancellation path should never touch it. Add a new field
instead of the flag, move it into the 3rd cache line because it should
always be initialised. poll_refs can move further as polling is an
involved process anyway.
It's a minimal patch, in the future we can and should find a better
place for it and remove now unused REQ_F_CANCEL_SEQ.
Fixes: 521223d7c2 ("io_uring/cancel: don't default to setting req->work.cancel_seq")
Cc: stable@vger.kernel.org
Reported-by: Li Shi <sl1589472800@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6827b129f8f0ad76fa9d1f0a773de938b240ffab.1718323430.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Xe Maintainers update to MAINTAINERS file.
Driver Changes:
- Use correct forcewake assertions.
- Assert that VRAM provisioning is only done on DGFX.
- Flush render caches before user-fence signalling on all engines.
- Move the disable_c6 call since it was sometimes never called.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRskUM7w1oG5rx2IZO4FpNVCsYGvwUCZmrWQwAKCRC4FpNVCsYG
v5BIAP9gS5S9mRVp9h+vgo5U84h2VUDT3IoKBEFslkmhKuFATwEAsfbr2m3fD5RT
idAbg0enxy5V/etTB7oK/1TaSKFAqwo=
=ApmP
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-fixes-2024-06-13' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Core Changes:
- Xe Maintainers update to MAINTAINERS file.
Driver Changes:
- Use correct forcewake assertions.
- Assert that VRAM provisioning is only done on DGFX.
- Flush render caches before user-fence signalling on all engines.
- Move the disable_c6 call since it was sometimes never called.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZmrXV0FoBb8M0c6J@fedora
Prepare for skipping the IO Advice Hints Grouping mode page for USB storage
devices.
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Joao Machado <jocrismachado@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Christian Heusel <christian@heusel.eu>
Cc: stable@vger.kernel.org
Fixes: 4f53138fff ("scsi: sd: Translate data lifetime information")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240613211828.2077477-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Under the conditions that a device is to be reinitialized within
ufshcd_probe_hba(), the device must first be fully reset.
Resetting the device should include freeing U8 model (member of dev_info)
but does not, and this causes a memory leak. ufs_put_device_desc() is
responsible for freeing model.
unreferenced object 0xffff3f63008bee60 (size 32):
comm "kworker/u33:1", pid 60, jiffies 4294892642
hex dump (first 32 bytes):
54 48 47 4a 46 47 54 30 54 32 35 42 41 5a 5a 41 THGJFGT0T25BAZZA
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace (crc ed7ff1a9):
[<ffffb86705f1243c>] kmemleak_alloc+0x34/0x40
[<ffffb8670511cee4>] __kmalloc_noprof+0x1e4/0x2fc
[<ffffb86705c247fc>] ufshcd_read_string_desc+0x94/0x190
[<ffffb86705c26854>] ufshcd_device_init+0x480/0xdf8
[<ffffb86705c27b68>] ufshcd_probe_hba+0x3c/0x404
[<ffffb86705c29264>] ufshcd_async_scan+0x40/0x370
[<ffffb86704f43e9c>] async_run_entry_fn+0x34/0xe0
[<ffffb86704f34638>] process_one_work+0x154/0x298
[<ffffb86704f34a74>] worker_thread+0x2f8/0x408
[<ffffb86704f3cfa4>] kthread+0x114/0x118
[<ffffb86704e955a0>] ret_from_fork+0x10/0x20
Fixes: 96a7141da3 ("scsi: ufs: core: Add support for reinitializing the UFS device")
Cc: <stable@vger.kernel.org>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Joel Slebodnick <jslebodn@redhat.com>
Link: https://lore.kernel.org/r/20240613200202.2524194-1-jslebodn@redhat.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Fix an regression issue by adding 640x480 fallback mode
for Exynos HDMI driver.
Bug fix
- Fix a memory leak by ensuring the duplicated EDID is properly freed in the get_modes function.
Code cleanup
- Remove redundant driver owner initialization since platform_driver_register() sets it automatically.
-----BEGIN PGP SIGNATURE-----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=ydsM
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-fixes-for-v6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes
Regression fix
- Fix an regression issue by adding 640x480 fallback mode
for Exynos HDMI driver.
Bug fix
- Fix a memory leak by ensuring the duplicated EDID is properly freed in the get_modes function.
Code cleanup
- Remove redundant driver owner initialization since platform_driver_register() sets it automatically.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240610073839.37430-1-inki.dae@samsung.com
