Add a PCI power control driver that's capable of correctly powering up
devices using the power sequencing subsystem. The first users of this
driver are the ath11k module on QCA6390 and ath12k on WCN7850. These
packages require a certain delay between enabling the Bluetooth and WLAN
modules and the power sequencing subsystem takes care of it behind the
scenes.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240612082019.19161-6-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Some PCI devices must be powered-on before they can be detected on the
bus. Introduce a simple framework reusing the existing PCI OF
infrastructure.
The way this works is: a DT node representing a PCI device connected to
the port can be matched against its power control platform driver. If
the match succeeds, the driver is responsible for powering-up the device
and calling pci_pwrctl_device_set_ready() which will trigger a PCI bus
rescan as well as subscribe to PCI bus notifications.
When the device is detected and created, we'll make it consume the same
DT node that the platform device did. When the device is bound, we'll
create a device link between it and the parent power control device.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240612082019.19161-5-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
In preparation for introducing PCI device power control - a set of
library functions that will allow powering-up of PCI devices before
they're detected on the PCI bus - we need to populate the devices
defined on the device-tree.
We are reusing the platform bus as it provides us with all the
infrastructure we need to match the pwrctl drivers against the
compatibles from OF nodes.
These platform devices will be probed by the driver core and bound to
the PCI pwrctl drivers we'll introduce later.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240612082019.19161-4-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With PCI power control we deal with two struct device objects bound to
two different drivers but consuming the same OF node. We must not bind
the pinctrl twice. To that end: before setting the OF node of the newly
instantiated PCI device, check if a platform device consuming the same
OF node doesn't already exist on the platform bus and - if so - mark the
PCI device as reusing the OF node.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240612082019.19161-3-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
With the introduction of PCI device power control drivers that will be
able to trigger the port rescan when probing, we need to hold the rescan
mutex during the initial pci_host_probe() too or the two could get in
each other's way.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240612082019.19161-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
DT schema expects panel timings node to follow certain pattern,
dtbs_check warnings:
vt8500-bv07.dtb: display-timings: '800x480' does not match any of the regexes: '^timing', 'pinctrl-[0-9]+'
Linux drivers do not care about node name, so this should not have
effect on Linux.
Link: https://lore.kernel.org/r/20240509104749.216605-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
While commit 255ec3879d ("phy: exynos5-usbdrd: Add 26MHz ref clk
support") correctly states that CLKRSTCTRL[7:5] doesn't need to be set
on modern Exynos platforms, SSPPLLCTL[2:0] should be programmed with
the frequency of the reference clock for the USB2.0 phy instead.
I stumbled across this while adding support for the Google Tensor
gs101, but this should apply to E850 just the same.
Do so.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240507-samsung-usb-phy-fixes-v1-5-4ccba5afa7cc@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Using 0x82 seems odd, where everything else is just a sequence.
On E850, this macro isn't used (as a register value), only to assign
its value to the 'extrefclk' variable, which is otherwise unused on
that platform. Older platforms don't appear to support 26MHz in the
first place (since this macro was added for E850).
Furthermore, the downstream driver uses 0x82 to denote
USBPHY_REFCLK_DIFF_26MHZ (whatever that means exactly), but for all the
other values we match downstream's non-DIFF macros.
Update to avoid confusion. No functional change intended.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240507-samsung-usb-phy-fixes-v1-4-4ccba5afa7cc@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
on / not on is just a boolean flag and is a bit misleading as currently
on==1 means to turn off the power, and on==0 to turn power on.
Rename the flag and make it a bool to avoid confusion of future readers
of this code. No functional change.
While at it, fix a whitespace issue in nearby comment.
No functional change.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240507-samsung-usb-phy-fixes-v1-3-4ccba5afa7cc@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The timers-howto recommends using usleep_range() and friends anytime
waiting for >= ~10us is required. Doing so can help the timer subsystem
a lot to coalesce wakeups.
Additionally, fsleep() exists as a convenient wrapper so we do not have
to think about which exact sleeping function is required in which case.
Convert all udelay() calls in this driver to use fsleep() to follow the
recommendataion.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240507-samsung-usb-phy-fixes-v1-2-4ccba5afa7cc@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Most of the macros are ordered high -> low, but there are some
outliers.
Order them all uniformly from high to low. This will allow adding
additional register (field) definitions in a consistent way.
While at it, also remove some extra empty lines to group register bit
field definitions together with the relevant register. This makes the
registers easier to distinguish visually.
No functional change.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240507-samsung-usb-phy-fixes-v1-1-4ccba5afa7cc@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Replace "uhci" nodenames with "usb" as it's generic and aligns with
the schema binding.
Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240423150728.91527-1-sheharyaar48@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This is the first step towards removing the P2P Device MAC.
Use ROC (which uses the AUX MAC) for P2P Device
discoveribility and action frames.
Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.8c90e457abbd.I8e340759ecb299e05b1809f3d8060429c6cbbd01@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If non-BSS and remain-on-channel (ROC) blocking were to occur
simultaneously, they'd step on each other's toes, unblocking
when not yet supported. Disentangle these bits, and ROC doesn't
need to use the non_bss_link() function then.
Fixes: a1efeb8230 ("wifi: iwlwifi: mvm: Block EMLSR when a p2p/softAP vif is active")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140556.461fcf7b95bb.Id0d21dcb739d426ff15ec068b5df8abaab58884d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When EMLSR gets unblocked, the current code checks if the last exit was
due to an EXIT reason (as opposed to a BLOCKING one), and if so, it
does nothing, as in this case a MLO scan was scheduled to run in 30
seconds.
But the code doesn't consider the time that passed from the last exit,
so if immediately after the exit a blocker occurred (e.g. non-BSS
interface), and lasts for more than 30 seconds, then the MLO scan and the
following link selection will decide not to enter EMLSR, and when the
unblocking event finally happens, the reason is still set to the EXIT one,
so it will do nothing, and we will not have the chance to re-enable EMLSR.
Fix this by checking also the time that has passed since the last exit,
only if it is less than 30 seconds, we can count on the scheduled MLO
scan.
Note that clearing the reason itself can't be done since it is needed
for the EMLSR prevention mechanism.
Fixes: 2f33561ea8 ("wifi: iwlwifi: mvm: trigger link selection after exiting EMLSR")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240605140327.58556fc4cfa9.I4c55b3cd9f20b21b37f28258d0fb6842ba413966@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This was needed when we had multiple types of transports. Now we only
have pcie, so there is no need for this ops.
Cleanup the code such as the different trans APIs will call the pcie
function directly, instead of calling the callback,
and remove struct iwl_trans_ops.
Signed-off-by: Yedidya Benshimol <yedidya.ben.shimol@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.8315ff64f9f3.Ifdbc1f26d49766f7de553dcb5f613885f4ee65cc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The TX queue code was mostly moved out to support an internal
transport that we were never going to publish, but we're no
longer using that. Since we're also going to be dissolving
the virtual transport layer entirely, integrate the TX queue
code into the PCIe layer.
This also has a small kernel of already removing the virtual
transport function layer, since iwl_trans_send_cmd() calls
iwl_trans_pcie_send_hcmd() directly now, even if that still
calls the transport send_cmd method for now, we'll clean it
up later.
Also, not everything is renamed yet.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.936b13f45071.Ib219ce01a1e67bcad79d5131626db950252aaa46@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This really isn't correct to be in the opmode, do the clamping
(and power-of-2 fixup that may be necessary due to this, or even
otherwise) in the queue code. Also move down the retrying of the
allocation, it should be after all the size fixups, but also it
just makes sense, and avoids retrying same-size allocations in
the case of the BZ-family A-step workaround.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.000a0a1e807d.Ib822590d5aca76ff3168418ae2c139b3d43d81ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When entering D3 we want to configure skip over DTIM, but
it can't use the deflink configuration, that will not even
exist. Adjust the code to handle multiple links by taking
the min skip, even if we should only have a single active
link at this point.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605140327.bccf980fadb4.Idc98b9f3634f39d2fae9bd9916f5d050ccd48f95@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a user uses iw to connect to a network and we don't have any
information about the existing networks, cfg80211 will trigger a scan
internally even if the user didn't ask for a scan. This scan is
implemented by cfg80211_conn_scan(). This function called rdev_scan()
directly without honoring the WIPHY_FLAG_SPLIT_SCAN_6GHZ flag.
Use cfg80211_scan instead, this will split the scan if the low level
driver asked to.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.33f03661476a.I7b5be20a55aafe012cd9ddb3b4ba2d46b256ace4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There's no need to have the always-zero ret variable in
the function scope, move it into the inner scope only.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.eb7a24632d98.I72d7fe1da89d4b89bcfd0f5fb9057e3e69355cfe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When e.g. wpa_supplicant sets only the MLD "sta" authorized
state, the code actually applies that change, but then returns
an error to userspace anyway because there were no changes to
the link station, and no link ID was given. However, it's not
incorrect to not have a link ID when wanting to change only
the MLD peer ("sta") state, so the code shouldn't require it.
To fix this, separate the "new_link" argument out into a new
three-state enum, because if modify is called on a link STA
only, it should return an error if no link is given or if it
doesn't exist. For modify on the MLD "sta", not having a link
ID is OK, but if there is one it should be validated.
This seems to not have mattered much as wpa_supplicant just
prints a message and continues, and the authorized state was
already set before this error return. However, in the later
code powersave recalculation etc. will be skipped, so that it
may result in never allowing powersave on MLO connections.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.48e2b8af07e3.Ib9793c383fcba118c05100e024f4a11a1c3d0e85@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Setting a channel with 320 MHz channel width over hwsim results in an
array-index-out-of-bounds error. Fix it by adding 320 MHz to hwsim
supported channel widths.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.a766c1465566.Ib859c7233511b61b8a34022cfceeb4971c739d80@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In NDP ranging, the number of NDP exchanges is not negotiated
and thus is not limited by the protocol. Remove the limit on
FTMs per burst for trigger based and non trigger based ranging.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240605135233.916e228537d9.I5fe4c1cefa1c1328726e7615dd5a0d861c694381@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
On 6 GHz (and also 5 GHz to some degree), only a specific set of center
frequencies should be used depending on the channel bandwidth. Verify
this is the case on 6 GHz. For 5 GHz, we are more accepting as there are
APs that got it wrong historically.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240602102200.876b10a2beda.I0d3d0daea4014e99654437ff6691378dbe452652@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a regulatory flag to allow VLP AP operation even on
channels otherwise marked NO_IR, which may be possible
in some regulatory domains/countries.
Note that this requires checking also when the beacon is
changed, since that may change the regulatory power type.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.63792ce19790.Ie2a02750d283b78fbf3c686b10565fb0388889e2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are two functions exported now, with different settings,
refactor to just export a single function that take a struct
with different settings. This will make it easier to add more
parameters.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.d44c34dadfc2.I59b4403108e0dbf7fc6ae8f7522e1af520cffb1c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add cfg80211_get_6ghz_power_type() to parse the 6 GHz
power type from a given set of elements, which is now
only inside cfg80211_6ghz_power_type_valid().
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.84cdffd94085.I76f434ee12552e8be91273f3b2d776179eaa62f1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To later introduce an override for VLP APs being allowed despite
NO-IR flags, which is somewhat similar in construction to being
allowed to monitor on disabled channels, refactor the code that
checks channel flags to have not a 'monitor' argument but a set
of 'permitting' flags that permit the operation without checking
for 'prohibited' flags.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.3da28ded4a50.I90cffc633d0510293d511f60097dc75e719b55f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This really shouldn't have been in ieee80211.h, since it
doesn't directly represent the spec. Move it to cfg80211
rather than mac80211 since upcoming changes will use it
there.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.962b16c831cd.I5745962525b1b176c5b90d37b3720fc100eee406@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This has never been used, and it's really not directly
representing the spec, so shouldn't have been here in
the first place. Remove it.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.32ed8fc1522d.Id4480d162e1921478e33d145890dc16c263b57bf@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use BIT(x) instead of 1<<x, in part because it's mostly
missing spaces anyway, in part because it reads nicer.
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.c21598fbf49c.Ib8f26c5e9f508aee19fdfa1fd4b5995f084c46d4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It may be possible to monitor on disabled channels per the
can-monitor flag, but evidently I forgot to expose that out
to userspace. Fix that.
Fixes: a110a3b791 ("wifi: cfg80211: optionally support monitor on disabled channels")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240523120945.9a2c19a51e53.I50fa1b1a18b70f63a5095131ac23dc2e71f3d426@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently NL80211_RATE_INFO_HE_RU_ALLOC_2x996 is not handled in
cfg80211_calculate_bitrate_he(), leading to below warning:
kernel: invalid HE MCS: bw:6, ru:6
kernel: WARNING: CPU: 0 PID: 2312 at net/wireless/util.c:1501 cfg80211_calculate_bitrate_he+0x22b/0x270 [cfg80211]
Fix it by handling 2x996 RU allocation in the same way as 160 MHz bandwidth.
Fixes: c4cbaf7973 ("cfg80211: Add support for HE")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Link: https://msgid.link/20240606020653.33205-3-quic_bqiang@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 3e2f544dd8 ("net: get stats64 if device if driver is
configured") moved the callback to dev_get_tstats64() to net core, so,
unless the driver is doing some custom stats collection, it does not
need to set .ndo_get_stats64.
Since this driver is now relying in NETDEV_PCPU_STAT_TSTATS, then, it
doesn't need to set the dev_get_tstats64() generic .ndo_get_stats64
function pointer.
In this driver specifically, .ndo_get_stats64 basically points to
dev_fetch_sw_netstats(). Now it will point to dev_get_tstats64(), which
calls netdev_stats_to_stats64() and dev_fetch_sw_netstats().
netdev_stats_to_stats64() seems irrelevant for this driver.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240607102045.235071-2-leitao@debian.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With commit 34d21de99c ("net: Move {l,t,d}stats allocation to core and
convert veth & vrf"), stats allocation could be done on net core instead
of this driver.
With this new approach, the driver doesn't have to bother with error
handling (allocation failure checking, making sure free happens in the
right spot, etc). This is core responsibility now.
Move mac80211 driver to leverage the core allocation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240607102045.235071-1-leitao@debian.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Jiazi Li reported that they occasionally see hash table duplicates
as evidenced by the WARN_ON() in rb_insert_bss() in this code. It
isn't clear how that happens, nor have I been able to reproduce it,
but if it does happen, the kernel crashes later, when it tries to
unhash the entry that's now not hashed.
Try to make this situation more survivable by removing the BSS from
the list(s) as well, that way it's fully leaked here (as had been
the intent in the hash insert error path), and no longer reachable
through the list(s) so it shouldn't be unhashed again later.
Link: https://lore.kernel.org/r/20231026013528.GA24122@Jiazi.Li
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240607181726.36835-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When a monitor interface is started, ieee80211_recalc_offload() is
called and 802.11 encapsulation offloading support get disabled so
monitor interface could get native wifi frames directly. But when
this interface is stopped there is no need to keep the 802.11
encpasulation offloading off.
This call ieee80211_recalc_offload() when monitor interface is stopped
so 802.11 encapsulation offloading gets re-activated if possible.
Fixes: 6aea26ce5a ("mac80211: rework tx encapsulation offload API")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://msgid.link/840baab454f83718e6e16fd836ac597d924e85b9.1716048326.git.repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For the EHT EIRP transmit power envelope, the 320 MHz is in
the last octet, but if we've copied 4 octets (count == 3),
the next one is at index 4 not 5 (count + 2). Fix this, and
just hardcode the offset since count is always 3 here.
Fixes: 39dc8b8ea3 ("wifi: mac80211: pass parsed TPE data to drivers")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240612100533.f96c1e0fb758.I2f301c4341abb44dafd29128e7e32c66dc0e296d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The control and ack force-wake registers are not accessible for
the VF drivers. To avoid changing existing code logic that tracks
woken domains, simply ignore all attempts to access control or ack
registers if we are running as a VF driver.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611163537.1944-6-michal.wajdeczko@intel.com
For debug purposes it might be useful to look at the values of the
force-wake ack registers in case wake/sleep operations failures.
Move xe_gt_notice() from the caller to the helper function, where
we have the latest value of force-wake ack register available.
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240611163537.1944-4-michal.wajdeczko@intel.com
