This removes the dependencies of hci_req_init and hci_request_cancel_all
from hci_sync.c.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This moves handling of interleave_scan work to hci_sync.c since
hci_request.c is deprecated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This replaces the instance of hci_prepare_cmd with hci_cmd_sync_alloc
since the former is part of hci_request.c which is considered
deprecated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_request functions are considered deprecated so this replaces the
usage of hci_req_sync with hci_inquiry_sync.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This helps validating DTS files. Introduced changes:
1. Dropped serial details from example
2. Added required example include
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
__hci_cmd_sync_status shall only be used if hci_req_sync_lock is _not_
required which is not the case of hci_dev_cmd so it needs to use
hci_cmd_sync_status which uses hci_req_sync_lock internally.
Fixes: f1a8f402f1 ("Bluetooth: L2CAP: Fix deadlock")
Reported-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove unused and set but otherwise unused 'discovery_old_state'
and 'sco_last_tx' members of 'struct hci_dev'. The first one is
a leftover after commit 182ee45da0 ("Bluetooth: hci_sync: Rework
hci_suspend_notifier"); the second one is originated from ancient
2.4.19 and I was unable to find any actual use since that.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
We unnecessarily fallthrough the case for QCA6390 when initializing the
device and hit the condition where - due to the lack of the enable-gpio
- we disable power management despite using the power sequencer. We don't
need to look for clocks on this model so it makes more sense to just
register the hci device and break the switch.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Fixes: 9a15ce6857 ("Bluetooth: qca: use the power sequencer for QCA6390")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # RB5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_HCIUART_QCA, which is a bool and an HCI UART component, uses now
power sequencing, so we need to be sure BT_HCIUART_QCA=y and
POWER_SEQUENCING=m cannot happen:
/usr/bin/aarch64-linux-gnu-ld: drivers/bluetooth/hci_qca.o: in function `qca_serdev_probe':
drivers/bluetooth/hci_qca.c:2401:(.text+0xc48): undefined reference to `devm_pwrseq_get'
/usr/bin/aarch64-linux-gnu-ld: drivers/bluetooth/hci_qca.o: in function `qca_power_shutdown':
drivers/bluetooth/hci_qca.c:2192:(.text+0x29e8): undefined reference to `pwrseq_power_off'
/usr/bin/aarch64-linux-gnu-ld: drivers/bluetooth/hci_qca.o: in function `qca_power_on':
drivers/bluetooth/hci_qca.c:1808:(.text+0x3390): undefined reference to `pwrseq_power_on'
Fixes: 9a15ce6857 ("Bluetooth: qca: use the power sequencer for QCA6390")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixes: f3b845e0ae ("Bluetooth: btintel: Add support to download intermediate loader")
Cc: Kiran K <kiran.k@intel.com>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Use the pwrseq subsystem's consumer API to run the power-up sequence for
the Bluetooth module of the QCA6390 package.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-QRD, SM8650-QRD & SM8650-HDK
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # OnePlus 8T
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
QCA6390 has a compatible listed in the bindings but is missing the
regulators description. Add the missing supply property and list the
required ones in the allOf section.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-----BEGIN PGP SIGNATURE-----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=Ft39
-----END PGP SIGNATURE-----
Merge tag 'pwrseq-initial-for-v6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into HEAD
Initial implementation of the power sequencing subsystem for linux v6.11
Instead of the explicit "1 << x", use BIT() macro for one bit values.
This will improve the readability and also avoids the possible bad
value for 31bit shift.
Link: https://patch.msgid.link/20240715123646.26679-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The same name is set when allocating the netdevice structure in the
alloc_etherdev_mq()->alloc_etherrdev_mqs() function. Therefore, there
is no need to manually set it.
This fixes CheckPatch warnings:
WARNING: Prefer strscpy over strcpy - see: https://github.com/KSPP/linux/issues/88
strcpy(dev->name, "eth%d");
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20240713170920.863171-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pawel Dembicki says:
====================
net: dsa: vsc73xx: Implement VLAN operations
This patch series is a result of splitting a larger patch series [0],
where some parts was merged before.
The first patch implements port state configuration, which is required
for bridge functionality. STP frames are not forwarded at this moment.
BPDU frames are only forwarded from/to the PI/SI interface.
For more information, see chapter 2.7.1 (CPU Forwarding) in the
datasheet.
Patches 2, 7-9 and 11 provide a basic implementation of tag_8021q
functionality with QinQ support, without VLAN filtering in
the bridge and simple VLAN awareness in VLAN filtering mode.
Patches 3-6 came from Vladimir Oltean. They prepare for making
tag8021q more common. VSC73XX uses very similar tag recognition,
and some code from tag_sja1105 could be moved to tag_8021q for
common use.
Patch 10 is preparation for use tag_8021q bridge functions as generic
implementation of the 'ds->ops->port_bridge_*()'.
Patch 12 is required to avoid problem with learning on standalone ports.
[0] https://patchwork.kernel.org/project/netdevbpf/list/?series=841034&state=%2A&archive=both
====================
Link: https://patch.msgid.link/20240713211620.1125910-1-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implements .port_pre_bridge_flags() and .port_bridge_flags(),
which are required for properly treating the BR_LEARNING flag. Also,
.port_stp_state_set() is tweaked and now disables learning for standalone
ports.
Disabling learning for standalone ports is required to avoid situations
where one port sees traffic originating from another, which could cause
packet drops.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-13-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds bridge support for the vsc73xx driver.
The vsc73xx requires minimal operations and ithe generic
dsa_tag_8021q_bridge_* API is sufficient.
The forwarding matrix is managed by vsc73xx_port_stp_state_set() ->
vsc73xx_refresh_fwd_map()i routine, which is called immediately after
.port_bridge_join() and .port_bridge_leave().
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-12-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The 'dsa_tag_8021q_bridge_join' could be used as a generic implementation
of the 'ds->ops->port_bridge_join()' function. However, it is necessary
to synchronize their arguments.
This patch also moves the 'tx_fwd_offload' flag configuration line into
'dsa_tag_8021q_bridge_join' body. Currently, every (sja1105) driver sets
it, and the future vsc73xx implementation will also need it for
simplification.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-11-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Max number of bridges in tag8021q implementation is strictly limited
by VBID size: 3 bits. But zero is reserved and only 7 values can be used.
This patch adds define which describe maximum possible value.
Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-10-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch is a simple implementation of 802.1q tagging in the vsc73xx
driver. Currently, devices with DSA_TAG_PROTO_NONE are not functional.
The VSC73XX family doesn't provide any tag support for external Ethernet
ports.
The only option available is VLAN-based tagging, which requires constant
hardware VLAN filtering. While the VSC73XX family supports provider
bridging, it only supports QinQ without full implementation of 802.1AD.
This means it only allows the doubled 0x8100 TPID.
In the simple port mode, QinQ is enabled to preserve forwarding of
VLAN-tagged frames.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-9-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit introduces a new tagger based on 802.1q tagging.
It's designed for the vsc73xx driver. The VSC73xx family doesn't have
any tag support for the RGMII port, but it could be based on VLANs.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patch.msgid.link/20240713211620.1125910-8-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A new tagging protocol implementation based on tag_8021q is on the
horizon, and it appears that it also has to open-code the complicated
logic of finding a source port based on a VLAN header.
Create a single dsa_tag_8021q_find_user() and make sja1105 call it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240713211620.1125910-7-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that dsa_8021q_rcv() handles better the case where we don't
overwrite the precise source information if it comes from an external
(non-tag_8021q) source, we can now unify the call sequence between
sja1105_rcv() and sja1110_rcv().
This is a preparatory change for creating a higher-level wrapper for the
entire sequence which will live in tag_8021q.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-6-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tag_sja1105 has a wrapper over dsa_8021q_rcv(): sja1105_vlan_rcv(),
which determines whether the packet came from a bridge with
vlan_filtering=1 (the case resolved via
dsa_find_designated_bridge_port_by_vid()), or if it contains a tag_8021q
header.
Looking at a new tagger implementation for vsc73xx, based also on
tag_8021q, it is becoming clear that the logic is needed there as well.
So instead of forcing each tagger to wrap around dsa_8021q_rcv(), let's
merge the logic into the core.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-5-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In both sja1105_rcv() and sja1110_rcv(), we may have precise source port
information coming from parallel hardware mechanisms, in addition to the
tag_8021q header.
Only sja1105_rcv() has extra logic to not overwrite that precise info
with what's present in the VLAN tag. This is because sja1110_rcv() gets
by, by having a reversed set of checks when assigning skb->dev. When the
source port is imprecise (vbid >=1), source_port and switch_id will be
set to zeroes by dsa_8021q_rcv(), which might be problematic. But by
checking for vbid >= 1 first, sja1110_rcv() fends that off.
We would like to make more code common between sja1105_rcv() and
sja1110_rcv(), and for that, we need to make sure that sja1110_rcv()
also goes through the precise source port preservation logic.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Tested-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-4-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch implements VLAN filtering for the vsc73xx driver.
After starting VLAN filtering, the switch is reconfigured from QinQ to
a simple VLAN aware mode. This is required because VSC73XX chips do not
support inner VLAN tag filtering.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-3-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This isn't a fully functional implementation of 802.1D, but
port_stp_state_set is required for a future tag8021q operations.
This implementation handles properly all states, but vsc73xx doesn't
forward STP packets.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Link: https://patch.msgid.link/20240713211620.1125910-2-paweldembicki@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'struct flag_table' are not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
302932 40271 112 343315 53d13 drivers/infiniband/hw/hfi1/chip.o
After:
=====
text data bss dec hex filename
311636 31567 112 343315 53d13 drivers/infiniband/hw/hfi1/chip.o
Link: https://lore.kernel.org/r/782b6a648bfbbf2bb83f81a73c0460b5bb7642a1.1720959310.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
There were several undocumented fields in structs irq_domain_ops and
irq_domain_info. Document them.
irq_domain_ops::revmap_size contained "[]" in the description, which is not
allowed in sphinx. Remove that.
Finally, plug the whole header (irqdomain.h) into genericirq.rst, so that
the docs is autogenerated and hyperlinks to these structure are created.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240712064148.157040-1-jirislaby@kernel.org
The callers of request_irq() don't care about IRQF_ONESHOT because they
don't provide threaded handlers, but if they happen to share the IRQ with
the ACPI SCI, which has a threaded handler and sets IRQF_ONESHOT,
request_irq() will fail for them due to a flags mismatch.
Address this by making request_irq() add IRQF_COND_ONESHOT to the flags
passed to request_threaded_irq() for all of its callers.
Fixes: 7a36b901a6 ("ACPI: OSL: Use a threaded interrupt handler for SCI")
Reported-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Stefan Seyfried <stefan.seyfried@googlemail.com>
Cc: stable@vger.kerel.org
Link: https://lore.kernel.org/r/5800834.DvuYhMxLoT@rjwysocki.net
Closes: https://lore.kernel.org/lkml/205bd84a-fe8e-4963-968e-0763285f35ba@message-id.googlemail.com
The power domain is automatically activated from clk_prepare(). However, on
certain platforms like i.MX8QM and i.MX8QXP, the power-on handling invokes
sleeping functions, which triggers the 'scheduling while atomic' bug in the
context switch path during device probing:
BUG: scheduling while atomic: kworker/u13:1/48/0x00000002
Call trace:
__schedule_bug+0x54/0x6c
__schedule+0x7f0/0xa94
schedule+0x5c/0xc4
schedule_preempt_disabled+0x24/0x40
__mutex_lock.constprop.0+0x2c0/0x540
__mutex_lock_slowpath+0x14/0x20
mutex_lock+0x48/0x54
clk_prepare_lock+0x44/0xa0
clk_prepare+0x20/0x44
imx_irqsteer_resume+0x28/0xe0
pm_generic_runtime_resume+0x2c/0x44
__genpd_runtime_resume+0x30/0x80
genpd_runtime_resume+0xc8/0x2c0
__rpm_callback+0x48/0x1d8
rpm_callback+0x6c/0x78
rpm_resume+0x490/0x6b4
__pm_runtime_resume+0x50/0x94
irq_chip_pm_get+0x2c/0xa0
__irq_do_set_handler+0x178/0x24c
irq_set_chained_handler_and_data+0x60/0xa4
mxc_gpio_probe+0x160/0x4b0
Cure this by implementing the irq_bus_lock/sync_unlock() interrupt chip
callbacks and handle power management in them as they are invoked from
non-atomic context.
[ tglx: Rewrote change log, added Fixes tag ]
Fixes: 0136afa089 ("irqchip: Add driver for imx-irqsteer controller")
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240703163250.47887-1-shenwei.wang@nxp.com
The caller of gic_of_setup_kvm_info() already queried DT for the value
of the #redistributor-regions property. So just pass this value,
instead of doing the DT look-up again in the callee.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/808286a3ac08f60585ae7e2c848e0f9b3cb79cf8.1719912215.git.geert+renesas@glider.be
The BCM2835 ARMCTRL interrupt controller doesn't provide any facility to
configure the wakeup sources. That's the reason why the driver lacks the
irq_set_wake() callback for the interrupt chip.
But this prevent to properly enter power management states like "suspend to
idle".
Enable the flags IRQCHIP_SKIP_SET_WAKE and IRQCHIP_MASK_ON_SUSPEND so the
interrupt suspend logic can handle the chip correctly.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
In order to make sure that vpe->col_idx is correctly sampled when a VMAPP
command is issued, the vpe_lock must be held for the VPE. This is now
possible since the introduction of the per-VM vmapp_lock, which can be
taken before vpe_lock in the correct locking order.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Link: https://lore.kernel.org/r/20240705093155.871070-4-maz@kernel.org
vmovp_lock is abused in a number of cases to serialise updates
to vlpi_count[] and deal with map/unmap of a VM to ITSs.
Instead, provide a per-VM lock and revisit the use of vlpi_count[]
so that it is always wrapped in this per-VM vmapp_lock.
This reduces the potential contention on a concurrent VMOVP command,
and paves the way for subsequent VPE locking that holding vmovp_lock
actively prevents due to the lock ordering.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Link: https://lore.kernel.org/r/20240705093155.871070-3-maz@kernel.org
There are currently two paths to set the initial affinity of a VPE:
- at activation time on GICv4 without the stupid VMOVP list, and
on GICv4.1
- at map time for GICv4 with VMOVP list
The latter location may end-up modifying the affinity of VPE that is
currently running, making the results unpredictible.
Instead, unify the two paths, making sure to set the initial affinity only
at activation time.
Reported-by: Nianyao Tang <tangnianyao@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nianyao Tang <tangnianyao@huawei.com>
Link: https://lore.kernel.org/r/20240705093155.871070-2-maz@kernel.org
icssg_prueth.c and icssg_prueth_sr1.c drivers use multiple common .c
files. These common objects are getting added to multiple modules. As a
result when both drivers are enabled in .config, below warning is seen.
drivers/net/ethernet/ti/Makefile: icssg/icssg_common.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_classifier.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_config.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_mii_cfg.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_stats.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
drivers/net/ethernet/ti/Makefile: icssg/icssg_ethtool.o is added to multiple modules: icssg-prueth icssg-prueth-sr1
Fix this by building a new module (icssg.o) for all the common objects.
Both the driver can then depend on this common module.
Some APIs being exported have emac_ as the prefix which may result into
confusion with other existing APIs with emac_ prefix, to avoid
confusion, rename the APIs being exported with emac_ to icssg_ prefix.
This also fixes below error seen when both drivers are built.
ERROR: modpost: "icssg_queue_pop"
[drivers/net/ethernet/ti/icssg-prueth-sr1.ko] undefined!
ERROR: modpost: "icssg_queue_push"
[drivers/net/ethernet/ti/icssg-prueth-sr1.ko] undefined!
Reported-and-tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/oe-kbuild-all/202405182038.ncf1mL7Z-lkp@intel.com/
Fixes: 487f7323f3 ("net: ti: icssg-prueth: Add helper functions to configure FDB")
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Relying on position in the enum makes it subtly harder when doing merge
resolutions or backporting as it is easy to grab a patch and not notice it
is a uAPI change with a differently ordered enum. This may become a bigger
problem in next cycles when iommu_hwpt_invalidate_data_type and other
per-driver enums have patches flowing through different trees.
So lets start including constants for all the uAPI enums to make this
safer.
No functional change.
Link: https://lore.kernel.org/r/0-v1-2c06ec044924+133-iommufd_uapi_const_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Tested-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
When accessing a file with more entries than ES_MAX_ENTRY_NUM, the bh-array
is allocated in __exfat_get_entry_set. The problem is that the bh-array is
allocated with GFP_KERNEL. It does not make sense. In the following cases,
a deadlock for sbi->s_lock between the two processes may occur.
CPU0 CPU1
---- ----
kswapd
balance_pgdat
lock(fs_reclaim)
exfat_iterate
lock(&sbi->s_lock)
exfat_readdir
exfat_get_uniname_from_ext_entry
exfat_get_dentry_set
__exfat_get_dentry_set
kmalloc_array
...
lock(fs_reclaim)
...
evict
exfat_evict_inode
lock(&sbi->s_lock)
To fix this, let's allocate bh-array with GFP_NOFS.
Fixes: a3ff29a95f ("exfat: support dynamic allocate bh for exfat_entry_set_cache")
Cc: stable@vger.kernel.org # v6.2+
Reported-by: syzbot+412a392a2cd4a65e71db@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/lkml/000000000000fef47e0618c0327f@google.com
Signed-off-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Pass the idmapped mount information to the different helper
functions. Adapt the uid/gid checks in exfat_setattr to use the
vfsuid/vfsgid helpers.
Based on the fat implementation in commit 4b78993681
("fat: handle idmapped mounts") by Christian Brauner.
Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
If a port is blocking in the common instance but forwarding in an MST
instance, traffic egressing the bridge will be dropped because the
state of the common instance is overriding that of the MST instance.
Fix this by skipping the port state check in MST mode to allow
checking the vlan state via br_allowed_egress(). This is similar to
what happens in br_handle_frame_finish() when checking ingress
traffic, which was introduced in the change below.
Fixes: ec7328b591 ("net: bridge: mst: Multiple Spanning Tree (MST) mode")
Signed-off-by: Elliot Ayrey <elliot.ayrey@alliedtelesis.co.nz>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 917195d6f8 ("ARM: pxa: consolidate GPIO chip platform data")
tried to reuse the same instance of platform data for PXA25x and PXA27x
GPIO controllers by moving it into arch/arm/mach-pxa/devices.c
Unfortunately this file is built for other PXA variants which resulted
in the following error:
>> arm-linux-gnueabi-ld: arch/arm/mach-pxa/devices.o:(.data+0x167c): undefined reference to `gpio_set_wake'
Fix this by using #ifdef around PXA25x and PXA27x GPIO controller device
structures and associated data.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407112039.cyyIQ3Js-lkp@intel.com/
Fixes: 917195d6f8 ("ARM: pxa: consolidate GPIO chip platform data")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When adding the bindings for cache controllers to the MAINTAINERS entry,
I forgot to drop the riscv mailing list - and so completely unrelated to
riscv stuff is now being sent there. Drop it.
Fixes: 4ca47d8bcc ("MAINTAINERS: add cache binding directory to cache driver entry")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Steffen Klassert says:
====================
1) Fix esp_output_tail_tcp() on unsupported ESPINTCP.
From Hagar Hemdan.
2) Fix two bugs in the recently introduced SA direction separation.
From Antony Antony.
3) Fix unregister netdevice hang on hardware offload. We had to add another
list where skbs linked to that are unlinked from the lists (deleted)
but not yet freed.
4) Fix netdev reference count imbalance in xfrm_state_find.
From Jianbo Liu.
5) Call xfrm_dev_policy_delete when killingi them on offloaded policies.
Jianbo Liu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
"st,stih416-mpe-thermal" compatible seems to appear nowhere in the
device-tree nor in the documentation.
Remove compatible and related code.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Link: https://lore.kernel.org/r/20240708161840.102004-1-rgallaispou@gmail.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
