Currently every skl+ plane register defines some intermediate
macros to calculate the final register offset. Pull all of that
into common macros, simplifying the final register offset stuff
into just five defines:
- raw register offsets for the planes 1 and 2 on pipes A and B
- the final parametrized macro
v2: Rebase
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513170040.15393-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Rearrange the plane skl+ universal plane register definitions:
- keep everything related to the same register in one place
- sort based on register offset
- unify the whitespace/etc a bit
v2: Define register contents after all offsets (Jani)
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513165909.15234-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
On SKL+ the watermark/DDB registers are proper per-plane
registers. Move the definitons to their respective files.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
CC: Zhi Wang <zhi.wang.linux@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510152329.24098-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Move most of the SKL+ universal plane register definitions
into their own file. Declutters i915_reg.h a bit more.
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
CC: Zhi Wang <zhi.wang.linux@gmail.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510152329.24098-3-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Under some circumstances it may happen that the ks8851 Ethernet driver
stops sending data.
Currently the interrupt handler resets the interrupt status flags in the
hardware after handling TX. With this approach we may lose interrupts in
the time window between handling the TX interrupt and resetting the TX
interrupt status bit.
When all of the three following conditions are true then transmitting
data stops:
- TX queue is stopped to wait for room in the hardware TX buffer
- no queued SKBs in the driver (txq) that wait for being written to hw
- hardware TX buffer is empty and the last TX interrupt was lost
This is because reenabling the TX queue happens when handling the TX
interrupt status but if the TX status bit has already been cleared then
this interrupt will never come.
With this commit the interrupt status flags will be cleared before they
are handled. That way we stop losing interrupts.
The wrong handling of the ISR flags was there from the beginning but
with commit 3dc5d44545 ("net: ks8851: Fix TX stall caused by TX
buffer overrun") the issue becomes apparent.
Fixes: 3dc5d44545 ("net: ks8851: Fix TX stall caused by TX buffer overrun")
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <horms@kernel.org>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org # 5.10+
Signed-off-by: Ronald Wahl <ronald.wahl@raritan.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When running the bridge IGMP/MLD selftests on debug kernels we can get
spurious errors when setting up the IGMP/MLD exclude timeout tests
because the membership interval is just 3 seconds and the setup has 2
seconds of sleep plus various validations, the one second that is left
is not enough. Increase the membership interval from 3 to 5 seconds to
make room for the setup validation and 2 seconds of sleep.
Fixes: 34d7ecb3d4 ("selftests: net: bridge: update IGMP/MLD membership interval value")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Mediatek LVTS driver (Julien Panis)
- Remove the num_lvts_sensor and cal_offset fields of the
lvts_ctrl_data as they are not used. These are not functional fixes
but slight memory usage fix of the Mediatek LVTS driver (Julien
Panis)
- Fix wrong lvts_ctrl index leading to a NULL pointer dereference in
the Mediatek LVTS driver (Julien Panis)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmZDL8IACgkQqDIjiipP
6E9IGwgAlzaIbugHk6qgrkC1s6JhxdAay/sUAk4zJ7WYirtykdWS0/56hh2DL/Ub
VttvTWgDf6W4k/+gaV/hVWjEq5og82n249DSFlJmcAAcvTQ0Stk2LG2TTqRBmfb4
qPKqLoVWlMhDUlbhnNZoS04jApowRitgfOvtC1G0owqkmbzIOKryJJIbvK6VRWpm
qPo7aR99DJW7Cm3lLujyIC41PGb4vKGS2jFFFrf/s69vj40IVHw2jAHOkSJDS+H1
Jro7fTHtlf7eskg4abL9zUzDSJMJTNOTyyj8vJ0524V2I7SavZxbUBoWVfYc/OSf
gWqCZFlY6sWX7k331hhxrpWjdALlyA==
=e53Q
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.10-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Merge thermal driver fixes for 6.10-rc1 from Daniel Lezcano:
"- Check for a NULL pointer before using it in the probe routine of the
Mediatek LVTS driver (Julien Panis)
- Remove the num_lvts_sensor and cal_offset fields of the
lvts_ctrl_data as they are not used. These are not functional fixes
but slight memory usage fix of the Mediatek LVTS driver (Julien
Panis)
- Fix wrong lvts_ctrl index leading to a NULL pointer dereference in
the Mediatek LVTS driver (Julien Panis)"
* tag 'thermal-v6.10-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux:
thermal/drivers/mediatek/lvts_thermal: Fix wrong lvts_ctrl index
thermal/drivers/mediatek/lvts_thermal: Remove unused members from struct lvts_ctrl_data
thermal/drivers/mediatek/lvts_thermal: Check NULL ptr on lvts_data
Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984
based chipsets with on chipset connected led's using WMI Firmware API.
The LED device will get available named as "ath10k-phyX" at sysfs and
can be controlled with various triggers.
Adds also debugfs interface for gpio control.
Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
[kvalo: major reorg and cleanup]
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
[ansuel: rebase and small cleanup]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20230611080505.17393-1-ansuelsmth@gmail.com
Using 'hw_pressure' for local variable name is confusing in regard to the
per-CPU 'hw_pressure' variable that uses the same name:
include/linux/arch_topology.h:DECLARE_PER_CPU(unsigned long, hw_pressure);
... which puts it into a global scope for all code that includes
<linux/topology.h>, shadowing the local variable.
Rename it to avoid compiler confusion & Sparse warnings.
[ mingo: Expanded the changelog. ]
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240425073709.379016-1-vincent.guittot@linaro.org
Closes: https://lore.kernel.org/oe-kbuild-all/202404250740.VhQQoD7N-lkp@intel.com/
Fixes: d4dbc99171 ("sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()")
Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # QC SM8550 QRD
Some MeeGoPad top-set boxes have an ANX7428 Type-C Switch for USB3.1 Gen 1
and DisplayPort over Type-C alternate mode support.
The ANX7428 has a microcontroller which takes care of the PD negotiation
and automatically sets the builtin Crosspoint Switch to send the right
signal to the 4 highspeed pairs of the Type-C connector. It also takes
care of HPD and AUX channel routing for DP alternate mode.
IOW the ANX7428 operates fully autonomous and to the x5-Z8350 SoC
things look like there simple is a USB-3 Type-A connector and a
separate DisplayPort connector. Except that the BIOS does not
power on the ANX7428 at boot (meh).
Add a driver to power on the ANX7428. This driver is added under
drivers/platform/x86 rather than under drivers/usb/typec for 2 reasons:
1. This driver is specifically written to work with how the ANX7428 is
described in the ACPI tables of the MeeGoPad x86 (Cherry Trail) devices.
2. This driver only powers on the ANX7428 and does not do anything wrt
its Type-C functionality. It should be possible to tell the controller
which data- and/or power-role to negotiate and to swap the role(s) after
negotiation but the MeeGoPad top-set boxes always draw their power from
a separate power-connector and they only support USB host-mode. So this
functionality is unnecessary and due to lack of documentation this is
tricky to support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240514180343.70795-1-hdegoede@redhat.com
Add panel replay selective update support to debugfs status interface. In
case of sink supporting panel replay we will print out:
Sink support: PSR = no, Panel Replay = yes, Panel Replay Selective Update = yes
and PSR mode will look like this if printing out enabled panel replay
selective update:
PSR mode: Panel Replay Selective Update Enabled
Current PSR and panel replay printouts remain same.
Cc: Kunal Joshi <kunal1.joshi@intel.com>
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510093823.3146455-13-jouni.hogander@intel.com
Part of intel_psr2_config_valid is valid for panel replay. rename it as
intel_sel_update_config_valid. Split psr2 specific part and name it as
intel_psr2_config_valid.
v3:
- move early transport check to psr2 specific check
- check intel_psr2_config_valid only for non-Panel Replay case
v2:
- use psr2_global_enabled for panel replay as well
- goto unsupported instead of return when global enabled check fails
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510093823.3146455-12-jouni.hogander@intel.com
We are re-using PSR module parameters for panel replay. Update module
parameter descriptions with panel replay information:
enable_psr:
-1 (default) == follow what is in VBT
0 == disable PSR/PR
1 == Allow PSR1 and PR full frame update
2 == allow PSR1/PSR2 and PR Selective Update
enable_psr2_sel_fetch
0 == disable selective fetch for PSR and PR
1 (default) == allow selective fetch for PSR PR
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510093823.3146455-11-jouni.hogander@intel.com
DP Panel replay uses SRD_STATUS to track it's status despite selective
update mode.
Bspec: 53370, 68920
v4:
- use PSR2_STATUS for eDP Panel Replay
- handle intel_psr_wait_exit_locked as well
v3:
- do not use PSR2_STATUS for PSR1
v2:
- use intel_dp_is_edp to differentiate
- modify debugfs status as well
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510093823.3146455-9-jouni.hogander@intel.com
Currently intel_dp_get_su_granularity doesn't support panel replay.
This fix modifies it to support panel replay as well.
v4:
- use drm_dp_dpcd_readb instead of drm_dp_dpcd_read
- ensure return value is 0 if drm_dp_dpcd_readb fails
v3: use correct offset for DP_PANEL_PANEL_REPLAY_CAPABILITY
v2: rely on PSR definitions on common bits
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510093823.3146455-8-jouni.hogander@intel.com
Add new boolean to store panel replay selective update support of sink into
intel_psr struct. Detect panel replay selective update support and store
it into this new boolean.
v3: Clear sink_panel_replay_su_support in intel_dp_detect
v2: Merge adding new boolean into this patch
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510093823.3146455-7-jouni.hogander@intel.com
We are about to enable Panel Replay Selective update mode. Vsc revision 0x6
for Panel Replay no matter if it is selective update or full frame update
mode. Take this into account when preparing VSC SDP package.
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510093823.3146455-4-jouni.hogander@intel.com
After setting has_psr for panel replay as well crtc state dump is
improperly printing "psr: enabled" for Panel Replay as well. Fix this by
checking also has_panel_replay.
Fixes: 5afa6e4960 ("drm/i915/psr: Set intel_crtc_state->has_psr on panel replay as well")
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510093823.3146455-3-jouni.hogander@intel.com
We are going to reuse has_psr2 for panel_replay as well. Rename it
as has_sel_update to avoid confusion.
v3: do not add has_psr check into psr2 case in intel_dp_compute_vsc_sdp
v2: Rebase
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240510093823.3146455-2-jouni.hogander@intel.com
The driver tracks the time spent by NPU executing jobs
and shares it through sysfs `npu_busy_time_us` file.
It can be then used by user space applications to monitor device
utilization.
NPU is considered 'busy' starting with a first job submitted
to firmware and ending when there is no more jobs pending/executing.
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-13-jacek.lawrynowicz@linux.intel.com
Failed warm boot causes a cold boot that looses FW state and is
equivalent to a recovery or reset, so reset_counter should be
incremented in order for this failure to be detected by tests.
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-12-jacek.lawrynowicz@linux.intel.com
Add module parameter that enforces snooping for all NPU accesses,
both through MMU PTEs mappings and through TCU page table walk
override register bits for MMU page walks / configuration access.
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-10-jacek.lawrynowicz@linux.intel.com
Implement time based Metric Streamer profiling UAPI.
This is a generic mechanism allowing user mode tools to sample
NPU metrics. These metrics are defined by the FW and transparent to
the driver.
The user space can check for this feature by checking
DRM_IVPU_CAP_METRIC_STREAMER driver capability.
Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-9-jacek.lawrynowicz@linux.intel.com
Add support for HWS (hardware scheduler). It is disabled by default.
The sched_mode module param can be used to enable it.
Each context has multiple command queues with different priorities and
HWS enables priority based execution on the HW/FW side.
The driver in HWS mode has to send a couple additional messages to
initialize HWS and describe command queue priorities.
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-7-jacek.lawrynowicz@linux.intel.com
Add JSM messages that will be used to implement hardware scheduler.
Most of these messages are used to create and manage HWS specific
command queues.
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-6-jacek.lawrynowicz@linux.intel.com
Allocate per-context preemption buffers that are required by HWS.
There are two preemption buffers:
* primary - allocated in user memory range (PIOVA accessible)
* secondary - allocated in shave memory range
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-5-jacek.lawrynowicz@linux.intel.com
Create multiple command queues per engine with different priorities.
The cmdqs are created on-demand and they support 4 priority levels.
These priorities will later be used by the HWS (hardware scheduler).
Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240513120431.3187212-4-jacek.lawrynowicz@linux.intel.com
Initialize last_block_in_bio of struct f2fs_bio_info and clean up code.
Signed-off-by: Wu Bo <bo.wu@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When building without CONFIG_F2FS_FAULT_INJECTION, there is a warning
from each file that includes f2fs.h because the stub for
f2fs_build_fault_attr() is missing inline:
In file included from fs/f2fs/segment.c:21:
fs/f2fs/f2fs.h:4605:12: warning: 'f2fs_build_fault_attr' defined but not used [-Wunused-function]
4605 | static int f2fs_build_fault_attr(struct f2fs_sb_info *sbi, unsigned long rate,
| ^~~~~~~~~~~~~~~~~~~~~
Add the missing inline to resolve all of the warnings for this
configuration.
Fixes: 4ed886b187 ("f2fs: check validation of fault attrs in f2fs_build_fault_attr()")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Core & protocols
----------------
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd passing
functionality. New method based on Tarjan's Strongly Connected Components
algorithm should be both faster and remove a lot of workarounds
we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP packets
and forwarding them together. Useful for small switches / routers which
lack basic checksum offload in some scenarios (e.g. PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't
use NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6 address
labels, netdev threaded NAPI sysfs files, bonding driver's sysfs files,
MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics, TC Qdiscs,
neighbor entries, ARP entries via ioctl(SIOCGARP), a lot of the link
information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory accounting,
RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2% PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked,
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states.
State can be used either for input or output packet processing.
Things we sprinkled into general kernel code
--------------------------------------------
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter
---------
- Use GFP_KERNEL to clone elements, to deal better with OOM situations
and avoid failures in the .commit step.
BPF
---
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function entry
and return, the entry program can decide if the return program gets
executed and the entry program can share u64 cookie value with return
program. "Session mode" is a common use-case for tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw tracepoint
programs in order to ease migration from classic to raw tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V JITs.
This allows inlining functions which need to access per-CPU state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86 instruction.
Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor process-context
bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API
----------
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line) config.
- Initial bits of a queue control API, for now allowing a single queue
to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling
-----------------
- Remove the need to create a config file to run the net forwarding tests
so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test machine).
Add a few such tests.
- Create a shared code library for writing Python tests. Expose the YAML
Netlink library from tools/ to the tests for easy Netlink access.
- Move netfilter tests under net/, extend them, separate performance tests
from correctness tests, and iron out issues found by running them
"on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF info,
TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers
-------
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application rather
than dmesg (large number of driver changes from Asbjørn Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it messes up
TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the MII
bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API cleanup.
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices drivers.
Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=EsC2
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core & protocols:
- Complete rework of garbage collection of AF_UNIX sockets.
AF_UNIX is prone to forming reference count cycles due to fd
passing functionality. New method based on Tarjan's Strongly
Connected Components algorithm should be both faster and remove a
lot of workarounds we accumulated over the years.
- Add TCP fraglist GRO support, allowing chaining multiple TCP
packets and forwarding them together. Useful for small switches /
routers which lack basic checksum offload in some scenarios (e.g.
PPPoE).
- Support using SMP threads for handling packet backlog i.e. packet
processing from software interfaces and old drivers which don't use
NAPI. This helps move the processing out of the softirq jumble.
- Continue work of converting from rtnl lock to RCU protection.
Don't require rtnl lock when reading: IPv6 routing FIB, IPv6
address labels, netdev threaded NAPI sysfs files, bonding driver's
sysfs files, MPLS devconf, IPv4 FIB rules, netns IDs, tcp metrics,
TC Qdiscs, neighbor entries, ARP entries via ioctl(SIOCGARP), a lot
of the link information available via rtnetlink.
- Small optimizations from Eric to UDP wake up handling, memory
accounting, RPS/RFS implementation, TCP packet sizing etc.
- Allow direct page recycling in the bulk API used by XDP, for +2%
PPS.
- Support peek with an offset on TCP sockets.
- Add MPTCP APIs for querying last time packets were received/sent/acked
and whether MPTCP "upgrade" succeeded on a TCP socket.
- Add intra-node communication shortcut to improve SMC performance.
- Add IPv6 (and IPv{4,6}-over-IPv{4,6}) support to the GTP protocol
driver.
- Add HSR-SAN (RedBOX) mode of operation to the HSR protocol driver.
- Add reset reasons for tracing what caused a TCP reset to be sent.
- Introduce direction attribute for xfrm (IPSec) states. State can be
used either for input or output packet processing.
Things we sprinkled into general kernel code:
- Add bitmap_{read,write}(), bitmap_size(), expose BYTES_TO_BITS().
This required touch-ups and renaming of a few existing users.
- Add Endian-dependent __counted_by_{le,be} annotations.
- Make building selftests "quieter" by printing summaries like
"CC object.o" rather than full commands with all the arguments.
Netfilter:
- Use GFP_KERNEL to clone elements, to deal better with OOM
situations and avoid failures in the .commit step.
BPF:
- Add eBPF JIT for ARCv2 CPUs.
- Support attaching kprobe BPF programs through kprobe_multi link in
a session mode, meaning, a BPF program is attached to both function
entry and return, the entry program can decide if the return
program gets executed and the entry program can share u64 cookie
value with return program. "Session mode" is a common use-case for
tetragon and bpftrace.
- Add the ability to specify and retrieve BPF cookie for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints.
- Add an internal-only BPF per-CPU instruction for resolving per-CPU
memory addresses and implement support in x86, ARM64 and RISC-V
JITs. This allows inlining functions which need to access per-CPU
state.
- Optimize x86 BPF JIT's emit_mov_imm64, and add support for various
atomics in bpf_arena which can be JITed as a single x86
instruction. Support BPF arena on ARM64.
- Add a new bpf_wq API for deferring events and refactor
process-context bpf_timer code to keep common code where possible.
- Harden the BPF verifier's and/or/xor value tracking.
- Introduce crypto kfuncs to let BPF programs call kernel crypto
APIs.
- Support bpf_tail_call_static() helper for BPF programs with GCC 13.
- Add bpf_preempt_{disable,enable}() kfuncs in order to allow a BPF
program to have code sections where preemption is disabled.
Driver API:
- Skip software TC processing completely if all installed rules are
marked as HW-only, instead of checking the HW-only flag rule by
rule.
- Add support for configuring PoE (Power over Ethernet), similar to
the already existing support for PoDL (Power over Data Line)
config.
- Initial bits of a queue control API, for now allowing a single
queue to be reset without disturbing packet flow to other queues.
- Common (ethtool) statistics for hardware timestamping.
Tests and tooling:
- Remove the need to create a config file to run the net forwarding
tests so that a naive "make run_tests" can exercise them.
- Define a method of writing tests which require an external endpoint
to communicate with (to send/receive data towards the test
machine). Add a few such tests.
- Create a shared code library for writing Python tests. Expose the
YAML Netlink library from tools/ to the tests for easy Netlink
access.
- Move netfilter tests under net/, extend them, separate performance
tests from correctness tests, and iron out issues found by running
them "on every commit".
- Refactor BPF selftests to use common network helpers.
- Further work filling in YAML definitions of Netlink messages for:
nftables, team driver, bonding interfaces, vlan interfaces, VF
info, TC u32 mark, TC police action.
- Teach Python YAML Netlink to decode attribute policies.
- Extend the definition of the "indexed array" construct in the specs
to cover arrays of scalars rather than just nests.
- Add hyperlinks between definitions in generated Netlink docs.
Drivers:
- Make sure unsupported flower control flags are rejected by drivers,
and make more drivers report errors directly to the application
rather than dmesg (large number of driver changes from Asbjørn
Sloth Tønnesen).
- Ethernet high-speed NICs:
- Broadcom (bnxt):
- support multiple RSS contexts and steering traffic to them
- support XDP metadata
- make page pool allocations more NUMA aware
- Intel (100G, ice, idpf):
- extract datapath code common among Intel drivers into a library
- use fewer resources in switchdev by sharing queues with the PF
- add PFCP filter support
- add Ethernet filter support
- use a spinlock instead of HW lock in PTP clock ops
- support 5 layer Tx scheduler topology
- nVidia/Mellanox:
- 800G link modes and 100G SerDes speeds
- per-queue IRQ coalescing configuration
- Marvell Octeon:
- support offloading TC packet mark action
- Ethernet NICs consumer, embedded and virtual:
- stop lying about skb->truesize in USB Ethernet drivers, it
messes up TCP memory calculations
- Google cloud vNIC:
- support changing ring size via ethtool
- support ring reset using the queue control API
- VirtIO net:
- expose flow hash from RSS to XDP
- per-queue statistics
- add selftests
- Synopsys (stmmac):
- support controllers which require an RX clock signal from the
MII bus to perform their hardware initialization
- TI:
- icssg_prueth: support ICSSG-based Ethernet on AM65x SR1.0 devices
- icssg_prueth: add SW TX / RX Coalescing based on hrtimers
- cpsw: minimal XDP support
- Renesas (ravb):
- support describing the MDIO bus
- Realtek (r8169):
- add support for RTL8168M
- Microchip Sparx5:
- matchall and flower actions mirred and redirect
- Ethernet switches:
- nVidia/Mellanox:
- improve events processing performance
- Marvell:
- add support for MV88E6250 family internal PHYs
- Microchip:
- add DCB and DSCP mapping support for KSZ switches
- vsc73xx: convert to PHYLINK
- Realtek:
- rtl8226b/rtl8221b: add C45 instances and SerDes switching
- Many driver changes related to PHYLIB and PHYLINK deprecated API
cleanup
- Ethernet PHYs:
- Add a new driver for Airoha EN8811H 2.5 Gigabit PHY.
- micrel: lan8814: add support for PPS out and external timestamp trigger
- WiFi:
- Disable Wireless Extensions (WEXT) in all Wi-Fi 7 devices
drivers. Modern devices can only be configured using nl80211.
- mac80211/cfg80211
- handle color change per link for WiFi 7 Multi-Link Operation
- Intel (iwlwifi):
- don't support puncturing in 5 GHz
- support monitor mode on passive channels
- BZ-W device support
- P2P with HE/EHT support
- re-add support for firmware API 90
- provide channel survey information for Automatic Channel Selection
- MediaTek (mt76):
- mt7921 LED control
- mt7925 EHT radiotap support
- mt7920e PCI support
- Qualcomm (ath11k):
- P2P support for QCA6390, WCN6855 and QCA2066
- support hibernation
- ieee80211-freq-limit Device Tree property support
- Qualcomm (ath12k):
- refactoring in preparation of multi-link support
- suspend and hibernation support
- ACPI support
- debugfs support, including dfs_simulate_radar support
- RealTek:
- rtw88: RTL8723CS SDIO device support
- rtw89: RTL8922AE Wi-Fi 7 PCI device support
- rtw89: complete features of new WiFi 7 chip 8922AE including
BT-coexistence and Wake-on-WLAN
- rtw89: use BIOS ACPI settings to set TX power and channels
- rtl8xxxu: enable Management Frame Protection (MFP) support
- Bluetooth:
- support for Intel BlazarI and Filmore Peak2 (BE201)
- support for MediaTek MT7921S SDIO
- initial support for Intel PCIe BT driver
- remove HCI_AMP support"
* tag 'net-next-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1827 commits)
selftests: netfilter: fix packetdrill conntrack testcase
net: gro: fix napi_gro_cb zeroed alignment
Bluetooth: btintel_pcie: Refactor and code cleanup
Bluetooth: btintel_pcie: Fix warning reported by sparse
Bluetooth: hci_core: Fix not handling hdev->le_num_of_adv_sets=1
Bluetooth: btintel: Fix compiler warning for multi_v7_defconfig config
Bluetooth: btintel_pcie: Fix compiler warnings
Bluetooth: btintel_pcie: Add *setup* function to download firmware
Bluetooth: btintel_pcie: Add support for PCIe transport
Bluetooth: btintel: Export few static functions
Bluetooth: HCI: Remove HCI_AMP support
Bluetooth: L2CAP: Fix div-by-zero in l2cap_le_flowctl_init()
Bluetooth: qca: Fix error code in qca_read_fw_build_info()
Bluetooth: hci_conn: Use __counted_by() and avoid -Wfamnae warning
Bluetooth: btintel: Add support for Filmore Peak2 (BE201)
Bluetooth: btintel: Add support for BlazarI
LE Create Connection command timeout increased to 20 secs
dt-bindings: net: bluetooth: Add MediaTek MT7921S SDIO Bluetooth
Bluetooth: compute LE flow credits based on recvbuf space
Bluetooth: hci_sync: Use cmd->num_cis instead of magic number
...
