Define the contents of VBT block 253 (PRD Table).
Unfortunately the block has two definitions, with the cutoff
supposedly happening on ICL vs. TGL. Also according to some
notes it might be that the VBIOS (if that's still a thing)
still uses the old definition even on TGL+. Quite the mess.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-36-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Define the contents of the obsolete VBT block 55 (Compression
Parameters).
This was some early attempt at defining the compression
parameters. However the spec says:
"This block is obsolete and should not be consumed for any
compression programming."
Block 56 is the replacement that should actually be used.
So let's just name the obsolete old block but not even
bother defining the contents.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-34-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Define the contents of VBT block 50 (MIPI).
This was some easly attempt at a MIPI DSI stuff. I'm not sure
this was ever actually used (I certainly don't have any VBTs
with this block), but here's some kind of definition for it
anyway.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-33-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Define the contents of VBT block 57 (Vswing PreEmphasis Table).
The contents is highly platform specific. The columns of the
table corresponding to some set of PHY/etc registers. The rows
corresponding to all legal vswing+pre-emphasis combinations
(ie. should be 10 rows in each table). And each table
corresponds to a platform specific (mostly undocumented)
mapping based on link rate/eDP low-vswing/etc. parameters.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-32-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Having conditional around the of_node pointer of the drm_bridge structure
is not necessary, since drm_bridge structure always has the of_node as its
member.
Let's drop the conditional to get a better looks, please also note that
this is following the already accepted commitments. see commit d8dfccde27
("drm/bridge: Drop conditionals around of_node pointers") for reference.
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240507180001.1358816-1-sui.jingfeng@linux.dev
Define the contents of VBT block 25 (SDVO LVDS PPS).
Not 100% sure about the order of the fields as this is not
documented in the VBT spec anymore, but this order matches
what is included as part of the power sequencing SDVO commands
(struct sdvo_panel_power_sequencing). Also the real world
VBT data I have looks OK with this definition.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-25-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Define the contenst is VBT blocks 19,30,32 (Display Configuration
Removal Table) contents. There are three variants of this block:
pre-IVB, IVB, HSW+, with each having slightly different entries.
Curiously many HSW/BDW machines seem to have both the IVB and HSW+
variants in their VBTs simultanously. No idea why.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-21-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Define the contenst is VBT blocks 16,19,31 (Toggle List).
There are three variants of this block: pre-IVB, IVB, HSW+,
with each having slightly different entries.
Curiously many HSW/BDW machines seem to have both the IVB and
HSW+ variants in their VBTs simultanously. No idea why.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-20-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
For some reason ALM VBT has two dot clock override tables.
One as the normal block 15 and a second one as block 9.
The table in block 9 has no row_size/num_rows information.
On my Fujitsu Lifebook S6010 only the block 9 table has actual
data in it. Block 15 is present but all zeroes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-17-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Define the contents of VBT block 15 (Dot Clock Override Table)
The contents were reverse engineered by intuition. The gen2 stuff
seems solid as I can verify that against real world VBT data. The
gen3 stuff less so as all the gen3+ VBTs I have just filla the
entire block with zeroes.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-16-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Define the contents of VBT block 10 (Mode Removal Table).
There seem to be two variants:
- 8 byte entries for desktop systems
- 10 byte entries for mobile systems, with the extra
panel_flags being a bitmask of LFPs
It seems starting from HSW only the mobile variant is
used anymore.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Define the contents for VBT blocks:
- Block 6 (Extended MMIO Register Table)
- Block 7 (IO Software Flag Table)
- Block 8 (MMIO SWF Register Table)
All of these use the same basic layout, with two known variants:
- data_access_size==0xce -> offset,value tuples are u8,u8
- data_access_size==0x02 -> offset,value tuples are u32,u32
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-13-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Define the contents of VBT block 5 (Generic Mode Table).
Details were mostly gleaned from some VBIOS sources.
There are apparently two variants of the block: ALM only
vs. MGM, defined here as bdb_generic_mode_table_alm
and bdb_generic_mode_table_mgm. And those are the only two
platforms where I've seen this block.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-12-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
Define the contents of VBT block 4 (Mode Support List).
Slightly crazy layout with a variable length list at the start,
followed by the length of said list.
No real idea what these "Intel mode numbers" really are. What
I see in real world VBTs seems to be always the same list of
26 numbers, ranging between 0x30 and 0x84.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Child device 0x2 used to be "TV" until redefined to mean
EFP5 in version 215. Add a define for the old meaning as well.
Technically it was probably deprecated a lot before version
215 since native TV encoders were last seen on CTG, and SDVO
was fully gone by HSW. So something like "???-164" might also
be a reasonable way to document this, but no real harm in
saying "???-214" since nothing else presumably occupied that
bit in the meantime.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-7-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
When creating the topology for the test, three veth pairs are created in
the initial network namespace before being moved to one of the network
namespaces created by the test.
On systems where systemd-udev uses MACAddressPolicy=persistent (default
since systemd version 242), this will result in some net devices having
the same MAC address since they were created with the same name in the
initial network namespace. In turn, this leads to arping / ndisc6
failing since packets are dropped by the bridge's loopback filter.
Fix by creating each net device in the correct network namespace instead
of moving it there from the initial network namespace.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240426074015.251854d4@kernel.org/
Fixes: 7648ac72dc ("selftests: net: Add bridge neighbor suppression test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240507113033.1732534-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DEVICE_HANDLE_EFP4 has actually been in use since the very beginning,
or at least something has been occupying that bit because old
VBTs actually use it, and it definitely looks to be about external
displays given how its used. So let's ignore what the current spec
claims and remove the misleading version number comment.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240503122449.27266-3-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
It is possible that the host connected and saw a cm established
event and started sending nvme capsules on the qp, however the
ctrl did not yet see an established event. This is why the
rsp_wait_list exists (for async handling of these cmds, we move
them to a pending list).
Furthermore, it is possible that the ctrl cm times out, resulting
in a connect-error cm event. in this case we hit a bad deref [1]
because in nvmet_rdma_free_rsps we assume that all the responses
are in the free list.
We are freeing the cmds array anyways, so don't even bother to
remove the rsp from the free_list. It is also guaranteed that we
are not racing anything when we are releasing the queue so no
other context accessing this array should be running.
[1]:
--
Workqueue: nvmet-free-wq nvmet_rdma_free_queue_work [nvmet_rdma]
[...]
pc : nvmet_rdma_free_rsps+0x78/0xb8 [nvmet_rdma]
lr : nvmet_rdma_free_queue_work+0x88/0x120 [nvmet_rdma]
Call trace:
nvmet_rdma_free_rsps+0x78/0xb8 [nvmet_rdma]
nvmet_rdma_free_queue_work+0x88/0x120 [nvmet_rdma]
process_one_work+0x1ec/0x4a0
worker_thread+0x48/0x490
kthread+0x158/0x160
ret_from_fork+0x10/0x18
--
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
lapic_vector_set_in_irr() is already available, use it for checking
pending vectors at the local APIC. No functional change.
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Imran Khan <imran.f.khan@oracle.com>
Link: https://lore.kernel.org/r/20240506175612.1141095-1-jacob.jun.pan@linux.intel.com
The nsid value is a u32 that comes from nvmet_req_find_ns(). It's
endian data and we're on an error path and both of those raise red
flags. So let's make this safer.
1) Make the buffer large enough for any u32.
2) Remove the unnecessary initialization.
3) Use snprintf() instead of sprintf() for even more safety.
4) The sprintf() function returns the number of bytes printed, not
counting the NUL terminator. It is impossible for the return value to
be <= 0 so delete that.
Fixes: 505363957f ("nvmet: fix nvme status code when namespace is disabled")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The driver date serves no useful purpose, because it's hardly ever
updated. The information is misleading at best.
As described in Documentation/gpu/drm-internals.rst:
The driver date, formatted as YYYYMMDD, is meant to identify the date
of the latest modification to the driver. However, as most drivers
fail to update it, its value is mostly useless. The DRM core prints it
to the kernel log at initialization time and passes it to userspace
through the DRM_IOCTL_VERSION ioctl.
Stop printing the driver date at init, and start returning the empty
string "" as driver date through the DRM_IOCTL_VERSION ioctl.
The driver date initialization in drivers and the struct drm_driver date
member can be removed in follow-up.
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240429164336.1406480-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Merge series from Takashi Iwai <tiwai@suse.de>:
This is a series of trivial cleanup patches for ASoC to correct
the *-objs suffix in Makefile. The other ALSA code has been covered
by a previous patch set
https://lore.kernel.org/r/20240507135513.14919-1-tiwai@suse.de
As was suggested in a patch review, *-objs suffix in Makefile is
basically a wrong use nowadays for kernel driver modules.
They should be replaced with *-y suffix instead.
This is a result of systematic conversions, separated per directory.
Only lightly compile-tested.
The number of updated CPU capabilities per netlink event is hard-coded to
16. On systems with more than 16 CPUs (a common case), it takes more than
one thermal netlink event to relay all the new capabilities after an HFI
interrupt. This adds unnecessary overhead to both the kernel and user space
entities.
Increase the number of CPU capabilities updated per event to 64. Any system
with 64 CPUs or less can now update all the capabilities in a single
thermal netlink event.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When processing a hardware update, HFI generates as many thermal netlink
events as needed to relay all the updated CPU capabilities to user space.
The constant HFI_MAX_THERM_NOTIFY_COUNT is the number of CPU capabilities
updated per each of those events.
Give this constant a more descriptive name.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The delay between an HFI interrupt and its corresponding thermal netlink
event has so far been hard-coded to CONFIG_HZ jiffies (1 second). This
delay is too long for hardware that generates updates every tens of
milliseconds.
The HFI driver uses a delayed workqueue to send thermal netlink events. No
subsequent events will be sent if there is pending work.
As a result, much of the information of consecutive hardware updates will
be lost if the workqueue delay is too long. User space entities may act on
obsolete data. If the delay is too short, multiple events may overwhelm
listeners.
Set the delay to 100ms to strike a balance between too many and too few
events. Use milliseconds instead of jiffies to improve readability.
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The name of the constant HFI_UPDATE_INTERVAL is misleading. It is not a
periodic interval at which HFI updates are processed. It is the delay in
the processing of an HFI update after the arrival of an HFI interrupt.
Acked-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Ricardo Neri <ricardo.neri-calderon@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
To address the performance drop issue, an optimization has been
implemented. The incorrect highest performance value previously set by the
low-level power firmware for AMD CPUs with Family ID 0x19 and Model ID
ranging from 0x70 to 0x7F series has been identified as the cause.
To resolve this, a check has been implemented to accurately determine the
CPU family and model ID. The correct highest performance value is now set
and the performance drop caused by the incorrect highest performance value
are eliminated.
Before the fix, the highest frequency was set to 4200MHz, now it is set
to 4971MHz which is correct.
CPU NODE SOCKET CORE L1d:L1i:L2:L3 ONLINE MAXMHZ MINMHZ MHZ
0 0 0 0 0:0:0:0 yes 4971.0000 400.0000 400.0000
1 0 0 0 0:0:0:0 yes 4971.0000 400.0000 400.0000
2 0 0 1 1:1:1:0 yes 4971.0000 400.0000 4865.8140
3 0 0 1 1:1:1:0 yes 4971.0000 400.0000 400.0000
Fixes: f3a0523918 ("cpufreq: amd-pstate: Enable amd-pstate preferred core support")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218759
Signed-off-by: Perry Yuan <perry.yuan@amd.com>
Co-developed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Gaha Bana <gahabana@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
