There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430114142.28551-3-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430114142.28551-2-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FLT pin was incorrected documented as an output. The MAX8903 uses it to
signal to the processor that a charging fault has occurred.
Signed-off-by: Herman van Hazendonk <github.com@herrie.org>
Link: https://lore.kernel.org/r/20240415151645.1986014-1-github.com@herrie.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Introduce support for SPI-NAND driver of the Airoha NAND Flash Interface
found on Airoha ARM SoCs.
Tested-by: Rajeev Kumar <Rajeev.Kumar@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/6c9db20505b01a66807995374f2af475a23ce5b2.1714377864.git.lorenzo@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Jerome Brunet <jbrunet@baylibre.com>:
This patchset fixes 2 problems on TDM which both find a solution
by properly implementing the .trigger() callback for the TDM backend.
ATM, enabling the TDM formatters is done by the .prepare() callback
because handling the formatter is slow due to necessary calls to CCF.
The first problem affects the TDMIN. Because .prepare() is called on DPCM
backend first, the formatter are started before the FIFOs and this may
cause a random channel shifts if the TDMIN use multiple lanes with more
than 2 slots per lanes. Using trigger() allows to set the FE/BE order,
solving the problem.
There has already been an attempt to fix this 3y ago [1] and reverted [2]
It triggered a 'sleep in irq' error on the period IRQ. The solution is
to just use the bottom half of threaded IRQ. This is patch #1. Patch #2
and #3 remain mostly the same as 3y ago.
For TDMOUT, the problem is on pause. ATM pause only stops the FIFO and
the TDMOUT just starves. When it does, it will actually repeat the last
sample continuously. Depending on the platform, if there is no high-pass
filter on the analog path, this may translate to a constant position of
the speaker membrane. There is no audible glitch but it may damage the
speaker coil.
Properly stopping the TDMOUT in pause solves the problem. There is
behaviour change associated with that fix. Clocks used to be continuous
on pause because of the problem above. They will now be gated on pause by
default, as they should. The last change introduce the proper support for
continuous clocks, if needed.
[1]: https://lore.kernel.org/linux-amlogic/20211020114217.133153-1-jbrunet@baylibre.com
[2]: https://lore.kernel.org/linux-amlogic/20220421155725.2589089-1-narmstrong@baylibre.com
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Last batch of cleanups from Brent Lu, with Chromebooks now supported
with fewer modular machine drivers.
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
A set of changes that aims to improve readability of cohesiveness of the
pcm code for the avs-driver.
Start off with a change that synchronizes DAI open/close - DAIs are
started up in ascending order yet their shutdown does not follow the
scheme - it is done in the ascending order too, rather than desceding
one. This patch is a dependency for the next one in line.
To align the HDAudio DAI startup/shutdown with the non-HDAudio
equivalents, relocate the code from component to DAI. The reason above
is a dependency stems from codec driver requirements - HDAudio code
found in sound/pci/hda/ expects substream->runtime->private_data to
point to a valid stream (HOST) pointer.
With the hard part done, the follow up changes update the existing code
to reduce it is complexity - removal of duplicates, renaming of
ambiguous functions and adding new fields to DAI-data object so that the
number of local variables and casts is reduced.
Merge series from Krzysztof Kozlowski <krzk@kernel.org>:
The core code does not modify the 'struct snd_sof_dsp_ops' passed via
pointer in various places, so this can be made pointer to const in few
places. This in turn allows few drivers to have the local (usually
static) 'struct snd_sof_dsp_ops' as const which increased code safety,
as it is now part of rodata.
Not all drivers can be made safer that way. Intel and AMD rely on
customizing that 'struct snd_sof_dsp_ops' before passing to SOF, so they
won't benefit. They don't lose anything., either.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Fixes when fw_lib_prefix is not set, updated error messages, improved
dmesg logs to SoundWire configurations not supported by ACPI
tables/topology and support for IEC61937 passthrough.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
This patchset corrects a couple of mistakes corrected, improves
snd_soc_card allocation. The new functionality is mostly for
SoundWire platforms, with new SKUs for Dell and Acer, and support for
the Cirrus Logic bridge/sidecar amplifier topology.
Some copy/paste leftover, this is never used.
Fixes: e3d9eac99a ("selftests/bpf: wq: add bpf_wq_init() checks")
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240430-bpf-next-v3-3-27afe7f3b17c@kernel.org
If someone stores both a timer and a workqueue in a hash map, on free, we
would walk it twice.
Add a check in htab_free_malloced_timers_or_wq and free the timers and
workqueues if they are present.
Fixes: 246331e3f1 ("bpf: allow struct bpf_wq to be embedded in arraymaps and hashmaps")
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240430-bpf-next-v3-2-27afe7f3b17c@kernel.org
If someone stores both a timer and a workqueue in a map, on free
we would walk it twice.
Add a check in array_map_free_timers_wq and free the timers and
workqueues if they are present.
Fixes: 246331e3f1 ("bpf: allow struct bpf_wq to be embedded in arraymaps and hashmaps")
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20240430-bpf-next-v3-1-27afe7f3b17c@kernel.org
plane->state and plane->state->fb can be NULL, so add a check before
dereferencing them.
Found by testing with the imx driver.
Fixes: 879b3b6511 ("drm/fb_dma: Add generic get_scanout_buffer() for drm_panic")
Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240426121121.241366-1-jfalempe@redhat.com
Clear warnings that using uninitialized variable when fails
to get the valid value from SMU.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clear warning that field bp is uninitialized when
calling amdgpu_virt_ras_add_bps.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
using index i - 1U may beyond element index
for mc_data[] when i = 0.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clear warning that using uninitialized variable when the dpm is
not enabled and reuse the code for SMU13 to get the boot frequency.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Avoid using the negative values
for clk_idex as an index into an array pptable->DpmDescriptor.
V2: fix clk_index return check (Tim Huang)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Provide some lost ucode name shown via firmware ID.
v2: fix whitespace (Alex)
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add support for new SDMA firmware struct (V3) with PSP
front door load type.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Set SDMAx_WATCHDOG_CNTL.QUEUE_HANG_COUNT registers
to improve SDMA reliability.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This 8.4 inch panel is integrated in the Ayaneo Kun handheld
device. The panel resolution is 2560×1600, i.e. it has
portrait dimensions.
Decoding the EDID shows:
Manufacturer: MSF
Model: 4099
Display Product Name: 'TV080WUM-NL0 '
Judging from the product name this might be a clone of a
BOE panel, but with larger dimensions.
Panel frequently shows non-functional backlight control. Adding
some debug prints to update_connector_ext_caps() shows that
something the OLED bit of ext_caps is set, and then the driver
assumes that backlight is controlled via AUX.
Forcing backlight control to PWM via amdgpu.backlight=0 restores
backlight operation.
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/display/dc/clk_mgr/dcn401/dcn401_clk_mgr.c: dcn401/dcn401_clk_mgr.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8885
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
./drivers/gpu/drm/amd/display/dc/inc/hw/transform.h: spl/dc_spl_types.h is included more than once.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8884
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "instance" variable needs to be signed for the error handling to work.
Fixes: 8b2faf1a4f ("drm/amdgpu: add error handle to avoid out-of-bounds")
Reviewed-by: Bob Zhou <bob.zhou@amd.com>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add new members in sdma instance structure
for sdma v7_0 firmware.
Signed-off-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
pte_is_pte is new flag introduced in gmc v12 that
needs to be set by default for pte.
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Bump the kfd ioctl minor version to delcare the contiguous VRAM
allocation flag support.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add initial support for GMC v12.
v1: Add gmc v12_0 ip block support.
v2: Switch to gfx.kiq array.
v3: Switch to vmhubs_mask.
v4: Switch to AMDGPU_MMHUB0(0) and AMDGPU_GFXHUB(0)
v5: Rebase (Alex)
v6: Squash in fixes for AGP handling, gfxhub init order,
vmhub index (Alex)
v7: Rebase (Alex)
v8: squash in ecc fix (Alex)
Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mes schq engine require more waiting time for engine ready
before packet submission.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a race condition when re-creating a kfd_process for a process.
This has been observed when a process under the debugger executes
exec(3). In this scenario:
- The process executes exec.
- This will eventually release the process's mm, which will cause the
kfd_process object associated with the process to be freed
(kfd_process_free_notifier decrements the reference count to the
kfd_process to 0). This causes kfd_process_ref_release to enqueue
kfd_process_wq_release to the kfd_process_wq.
- The debugger receives the PTRACE_EVENT_EXEC notification, and tries to
re-enable AMDGPU traps (KFD_IOC_DBG_TRAP_ENABLE).
- When handling this request, KFD tries to re-create a kfd_process.
This eventually calls kfd_create_process and kobject_init_and_add.
At this point the call to kobject_init_and_add can fail because the
old kfd_process.kobj has not been freed yet by kfd_process_wq_release.
This patch proposes to avoid this race by making sure to drain
kfd_process_wq before creating a new kfd_process object. This way, we
know that any cleanup task is done executing when we reach
kobject_init_and_add.
Signed-off-by: Lancelot SIX <lancelot.six@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check the return of pp_atomfwctrl_get_Voltage_table_v4
as it may fail to initialize max_vid_step
V2: change the check condition (Tim Huang)
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable mes to map legacy queue support.
v2: kiq_set_resources is required.
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the BO pages pinned for RDMA is not contiguous on VRAM, evict it to
system memory first to free the VRAM space, then allocate contiguous
VRAM space, and then move it from system memory back to VRAM.
v6: user context should use interruptible call (Felix)
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Smatch complains because some lines are indented more than they should
be. I went a bit crazy re-indenting this. ;)
The comments were not useful except as a marker of things which are left
to implement so I deleted most of them except for the TODO.
I introduced a "data" pointer so that I could replace
"scl_data->dscl_prog_data." with just "data->" and shorten the lines a
bit. It's more readable without the line breaks.
I also tried to align it so you can see what is changing on each line.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clear warnings that using uninitialized value level when fails
to get the value from SMU.
Signed-off-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check the return of function smum_send_msg_to_smc
as it may fail to initialize the variable.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Check the return of function smum_send_msg_to_smc
as it may fail to initialize the variable.
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
