These commands don't require the adapter to be up and running so don't
use hci_cmd_sync_queue which would check that flag, instead use
hci_cmd_sync_submit which would ensure mgmt_class_complete is set
properly regardless if any command was actually run or not.
Link: https://github.com/bluez/bluez/issues/809
Fixes: d883a4669a ("Bluetooth: hci_sync: Only allow hci_cmd_sync_queue if running")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Qualcomm Bluetooth controllers may not have been provisioned with a
valid device address and instead end up using the default address
00:00:00:00:5a:ad.
This was previously believed to be due to lack of persistent storage for
the address but it may also be due to integrators opting to not use the
on-chip OTP memory and instead store the address elsewhere (e.g. in
storage managed by secure world firmware).
According to Qualcomm, at least WCN6750, WCN6855 and WCN7850 have
on-chip OTP storage for the address.
As the device type alone cannot be used to determine when the address is
valid, instead read back the address during setup() and only set the
HCI_QUIRK_USE_BDADDR_PROPERTY flag when needed.
This specifically makes sure that controllers that have been provisioned
with an address do not start as unconfigured.
Reported-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Link: https://lore.kernel.org/r/124a7d54-5a18-4be7-9a76-a12017f6cce5@quicinc.com/
Fixes: 5971752de4 ("Bluetooth: hci_qca: Set HCI_QUIRK_USE_BDADDR_PROPERTY for wcn3990")
Fixes: e668eb1e15 ("Bluetooth: hci_core: Don't stop BT if the BD address missing in dts")
Fixes: 6945795bc8 ("Bluetooth: fix use-bdaddr-property quirk")
Cc: stable@vger.kernel.org # 6.5
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reported-by: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The code shall always check if HCI_QUIRK_BROKEN_READ_ENC_KEY_SIZE has
been set before attempting to use HCI_OP_READ_ENC_KEY_SIZE.
Fixes: c569242cd4 ("Bluetooth: hci_event: set the conn encrypted before conn establishes")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
btusb_coredump_qca() uses __hci_cmd_sync() to send a vendor-specific
command to trigger firmware coredump, but the command does not
have any event as its sync response, so it is not suitable to use
__hci_cmd_sync(), fixed by using __hci_cmd_send().
Fixes: 20981ce2d5 ("Bluetooth: btusb: Add WCN6855 devcoredump support")
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The extended advertising reports do report the PHYs so this store then
in hci_conn so it can be later used in hci_le_ext_create_conn_sync to
narrow the PHYs to be scanned since the controller will also perform a
scan having a smaller set of PHYs shall reduce the time it takes to
find and connect peers.
Fixes: 288c90224e ("Bluetooth: Enable all supported LE PHY by default")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
After an innocuous optimization change in LLVM main (19.0.0), x86_64
allmodconfig (which enables CONFIG_KCSAN / -fsanitize=thread) fails to
build due to the checks in check_copy_size():
In file included from net/bluetooth/sco.c:27:
In file included from include/linux/module.h:13:
In file included from include/linux/stat.h:19:
In file included from include/linux/time.h:60:
In file included from include/linux/time32.h:13:
In file included from include/linux/timex.h:67:
In file included from arch/x86/include/asm/timex.h:6:
In file included from arch/x86/include/asm/tsc.h:10:
In file included from arch/x86/include/asm/msr.h:15:
In file included from include/linux/percpu.h:7:
In file included from include/linux/smp.h:118:
include/linux/thread_info.h:244:4: error: call to '__bad_copy_from'
declared with 'error' attribute: copy source size is too small
244 | __bad_copy_from();
| ^
The same exact error occurs in l2cap_sock.c. The copy_to_user()
statements that are failing come from l2cap_sock_getsockopt_old() and
sco_sock_getsockopt_old(). This does not occur with GCC with or without
KCSAN or Clang without KCSAN enabled.
len is defined as an 'int' because it is assigned from
'__user int *optlen'. However, it is clamped against the result of
sizeof(), which has a type of 'size_t' ('unsigned long' for 64-bit
platforms). This is done with min_t() because min() requires compatible
types, which results in both len and the result of sizeof() being casted
to 'unsigned int', meaning len changes signs and the result of sizeof()
is truncated. From there, len is passed to copy_to_user(), which has a
third parameter type of 'unsigned long', so it is widened and changes
signs again. This excessive casting in combination with the KCSAN
instrumentation causes LLVM to fail to eliminate the __bad_copy_from()
call, failing the build.
The official recommendation from LLVM developers is to consistently use
long types for all size variables to avoid the unnecessary casting in
the first place. Change the type of len to size_t in both
l2cap_sock_getsockopt_old() and sco_sock_getsockopt_old(). This clears
up the error while allowing min_t() to be replaced with min(), resulting
in simpler code with no casts and fewer implicit conversions. While len
is a different type than optlen now, it should result in no functional
change because the result of sizeof() will clamp all values of optlen in
the same manner as before.
Cc: stable@vger.kernel.org
Closes: https://github.com/ClangBuiltLinux/linux/issues/2007
Link: https://github.com/llvm/llvm-project/issues/85647
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Geliang Tang says:
====================
This patchset uses more network helpers in test_sock_addr.c, but
first of all, patch 2 is needed to make network_helpers.c independent
of test_progs.c. Then network_helpers.h can be included into
test_sock_addr.c without compile errors.
Patch 1 and patch 2 address Martin's comments for the previous series
too.
v2:
- Only a few minor cleanups to patch 5.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Include network_helpers.h in test_sock_addr.c, use the newly added public
helper start_server_addr() instead of the local defined function
start_server(). This can avoid duplicate code.
In order to use functions defined in network_helpers.c in test_sock_addr.c,
Makefile needs to be updated and <Linux/err.h> needs to be included in
network_helpers.h to avoid compilation errors.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/3101f57bde5502383eb41723c8956cc26be06893.1713868264.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
ASSERT helpers defined in test_progs.h shouldn't be used in public
functions like open_netns() and close_netns(). Since they depend on
test__fail() which defined in test_progs.c. Public functions may be
used not only in test_progs.c, but in other tests like test_sock_addr.c
in the next commit.
This patch uses log_err() to replace ASSERT helpers in open_netns()
and close_netns() in network_helpers.c to decouple dependencies, then
uses ASSERT_OK_PTR() to check the return values of all open_netns().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/d1dad22b2ff4909af3f8bfd0667d046e235303cb.1713868264.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
As Martin mentioned in review comment, there is an existing bug that
orig_netns_fd will be leaked in the later "goto fail;" case after
open("/proc/self/ns/net") in open_netns() in network_helpers.c. This
patch adds "close(token->orig_netns_fd);" before "free(token);" to
fix it.
Fixes: a30338840f ("selftests/bpf: Move open_netns() and close_netns() into network_helpers.c")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/a104040b47c3c34c67f3f125cdfdde244a870d3c.1713868264.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
After selecting ARCH_USE_CMPXCHG_LOCKREF, one straight futher
optimization is implementing the arch_cmpxchg64_relaxed() because the
lockref code does not need the cmpxchg to have barrier semantics. At
the same time, implement arch_cmpxchg64_acquire and
arch_cmpxchg64_release as well.
However, on both TH1520 and JH7110 platforms, I didn't see obvious
performance improvement with Linus' test case [1]. IMHO, this may
be related with the fence and lr.d/sc.d hw implementations. In theory,
lr/sc without fence could give performance improvement over lr/sc plus
fence, so add the code here to leave performance improvement room on
newer HW platforms.
Link: http://marc.info/?l=linux-fsdevel&m=137782380714721&w=4 [1]
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240325111038.1700-3-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Select ARCH_USE_CMPXCHG_LOCKREF to enable the cmpxchg-based lockless
lockref implementation for riscv.
Using Linus' test case[1] on TH1520 platform, I see a 11.2% improvement.
On JH7110 platform, I see 12.0% improvement.
Link: http://marc.info/?l=linux-fsdevel&m=137782380714721&w=4 [1]
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240325111038.1700-2-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_first_and_and() and cpumask_weight_and() to avoid the need
for a temporary cpumask on the stack.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240416085454.3547175-8-dawei.li@shingroup.cn
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_first_and_and() to avoid the need for a temporary cpumask on
the stack.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240416085454.3547175-7-dawei.li@shingroup.cn
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_first_and_and() to avoid the need for a temporary cpumask on
the stack.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20240416085454.3547175-6-dawei.li@shingroup.cn
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_first_and_and() to avoid the need for a temporary cpumask on
the stack.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20240416085454.3547175-5-dawei.li@shingroup.cn
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Remove cpumask var on stack and use cpumask_any_and() to address it.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240416085454.3547175-4-dawei.li@shingroup.cn
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_first_and_and() to avoid the need for a temporary cpumask on
the stack.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240416085454.3547175-3-dawei.li@shingroup.cn
Introduce cpumask_first_and_and() to get intersection between 3 cpumasks,
free of any intermediate cpumask variable. Instead, cpumask_first_and_and()
works in-place with all inputs and produces desired output directly.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20240416085454.3547175-2-dawei.li@shingroup.cn
kernel-doc emits a warning on struct_group_tagged() if you describe your
struct group member:
include/net/libeth/rx.h:69: warning: Excess struct member 'fp' description in 'libeth_fq'
The code:
/**
* struct libeth_fq - structure representing a buffer queue
* @fp: hotpath part of the structure
* @pp: &page_pool for buffer management
[...]
*/
struct libeth_fq {
struct_group_tagged(libeth_fq_fp, fp,
struct page_pool *pp;
[...]
);
When a struct_group_tagged() is encountered, we need to build a
`struct TAG NAME;` from it, so that it will be treated as a valid
embedded struct.
Decouple the regex and do the replacement there. As far as I can see,
this doesn't produce any new warnings on the current mainline tree.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240405212513.0d189968@kernel.org
Fixes: 50d7bd38c3 ("stddef: Introduce struct_group() helper macro")
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240411093208.2483580-1-aleksander.lobakin@intel.com
Commit 1e596d5eff ("docs: Detect variable fonts and suggest denylisting
them") adds the new script check-variable-fonts.sh and intends to refer to
it in the DOCUMENTATION section in MAINTAINERS. However, the file entry
refers to scripts/check-variable-font.sh. Note the missing "s".
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
Repair this new file entry in the DOCUMENTATION section.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240417101429.240495-1-lukas.bulwahn@redhat.com
The interrupt controller shutdown path does not need to save the mask of
enabled interrupts because the next state the system is going to be in is
akin to a cold boot, or a kexec'd kernel. Saving the mask only makes sense
if the software state needs to preserve the hardware state across a system
suspend/resume cycle.
As an optimization, and given that there are systems with dozens of such
interrupt controller, save a "slow" memory mapped I/O read in the shutdown
path where no saving/restoring is required.
Reported-by: Tim Ross <tim.ross@broadcom.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240424175732.1526531-1-florian.fainelli@broadcom.com
Assert that accesses to a non-existent vgic-v2 CPU interface
consistently fail across the various KVM device attr ioctls. This also
serves as a regression test for a bug wherein KVM hits a NULL
dereference when the CPUID specified in the ioctl is invalid.
Note that there is no need to print the observed errno, as TEST_ASSERT()
will take care of it.
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240424173959.3776798-3-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
vgic_v2_parse_attr() is responsible for finding the vCPU that matches
the user-provided CPUID, which (of course) may not be valid. If the ID
is invalid, kvm_get_vcpu_by_id() returns NULL, which isn't handled
gracefully.
Similar to the GICv3 uaccess flow, check that kvm_get_vcpu_by_id()
actually returns something and fail the ioctl if not.
Cc: stable@vger.kernel.org
Fixes: 7d450e2821 ("KVM: arm/arm64: vgic-new: Add userland access to VGIC dist registers")
Reported-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240424173959.3776798-2-oliver.upton@linux.dev
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Translate dev-tools/kcov into Chinese and add it in
dev-tools/zh_CN/index.rst.
Signed-off-by: Haoyang Liu <tttturtleruss@hust.edu.cn>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Reviewed-by: Alex Shi <alexs@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240421142021.19504-1-tttturtleruss@hust.edu.cn
Commit 839195352d ("mm/shuffle: remove dynamic reconfiguration")
removed the dynamic reconfiguration capabilities from the shuffle page
allocator. This means that, now, we don't have any perspective of an
"autodetection of memory-side-cache" that triggers the enablement of the
shuffle page allocator.
Therefore, let the documentation reflect that the only way to enable
the shuffle page allocator is by setting `page_alloc.shuffle=1`.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240422142007.1062231-1-mcanal@igalia.com
sched_core_share_pid() copies the cookie to userspace with
put_user(id, (u64 __user *)uaddr), expecting 64 bits of space.
The "unsigned long" datatype that is documented in core-scheduling.rst
however is only 32 bits large on 32 bit architectures.
Document "unsigned long long" as the correct data type that is always
64bits large.
This matches what the selftest cs_prctl_test.c has been doing all along.
Fixes: 0159bb020c ("Documentation: Add usecases, design and interface for core scheduling")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/util-linux/df7a25a0-7923-4f8b-a527-5e6f0064074d@t-8ch.de/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Chris Hyser <chris.hyser@oracle.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20240423-core-scheduling-cookie-v1-1-5753a35f8dfc@weissschuh.net
The "type_name" character array was still marked as a 1-element array.
While we don't validate strings used in format arguments yet, let's fix
this before it causes trouble some future day.
Link: https://lore.kernel.org/r/20240424162739.work.492-kees@kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Add a wrapper around the .trip_crossed() governor callback invocation
to reduce code duplications slightly and improve the code layout in
__thermal_zone_device_update().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Currently, tze_seq_show() output includes all of the trips in the zone
except for critical ones, including invalid trips and trips with no stats
which is confusing.
Make it skip the trips for which there is not mitigation information.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Rename thermal_debug_update_temp() to thermal_debug_update_trip_stats()
which is a better match for the purpose of the function.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Notice that it is not necessary to compute tze in every iteration of the
for () loop in thermal_debug_update_temp() because it is the same for all
trips, so compute it once before the loop starts.
Also use a trip_stats local variable to make the code in that loop easier
to follow and move the trip_id variable definition into that loop because
it is not used elsewhere in the function.
While at it, change to order of local variable definitions in the function
to follow the reverse-xmas-tree pattern.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Since thermal_debug_update_temp() is called before invoking
thermal_debug_tz_trip_down() for the trips that were crossed by the
zone temperature on the way up, it updates the statistics for them
as though the current zone temperature was above the low temperature
of each of them. However, if a given trip has just been crossed on the
way down, the zone temperature is in fact below its low temperature,
but this is handled by thermal_debug_tz_trip_down() running after the
update of the trip statistics.
The remedy is to call thermal_debug_update_temp() after
thermal_debug_tz_trip_down() has been invoked for all of the
trips in question, but then thermal_debug_tz_trip_up() needs to
be adjusted, so it does not update the statistics for the trips
that has just been crossed on the way up, as that will be taken
care of by thermal_debug_update_temp() down the road.
Modify the code accordingly.
Fixes: 7ef01f228c ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
When a CPU goes offline, the interrupts affine to that CPU are
re-configured.
Managed interrupts undergo either migration to other CPUs or shutdown if
all CPUs listed in the affinity are offline. The migration of managed
interrupts is guaranteed on x86 because there are interrupt vectors
reserved.
Regular interrupts are migrated to a still online CPU in the affinity mask
or if there is no online CPU to any online CPU.
This works as long as the still online CPUs in the affinity mask have
interrupt vectors available, but in case that none of those CPUs has a
vector available the migration fails and the device interrupt becomes
stale.
This is not any different from the case where the affinity mask does not
contain any online CPU, but there is no fallback operation for this.
Instead of giving up, retry the migration attempt with the online CPU mask
if the interrupt is not managed, as managed interrupts cannot be affected
by this problem.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423073413.79625-1-dongli.zhang@oracle.com
irq_restore_affinity_of_irq() restarts managed interrupts unconditionally
when the first CPU in the affinity mask comes online. That's correct during
normal hotplug operations, but not when resuming from S3 because the
drivers are not resumed yet and interrupt delivery is not expected by them.
Skip the startup of suspended interrupts and let resume_device_irqs() deal
with restoring them. This ensures that irqs are not delivered to drivers
during the noirq phase of resuming from S3, after non-boot CPUs are brought
back online.
Signed-off-by: David Stevens <stevensd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240424090341.72236-1-stevensd@chromium.org
Modify handle_thermal_trip() to call handle_critical_trips() only after
finding that the trip temperature has been crossed on the way up and
remove the redundant temperature check from the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Since all of the governors in the tree have been switched over to using
the new callbacks, either .trip_crossed() or .manage(), the .throttle()
governor callback is not used any more, so drop it.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Notifying user space about trip points that have not been crossed is
not particularly useful, so modify the User Space governor to use the
.trip_crossed() callback, which is only invoked for trips that have been
crossed, instead of .throttle() that is invoked for all trips in a
thermal zone every time the zone is updated.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add myself as a maintainer/supporter for libeth and libie. Let they have
separate entries from the Intel ethernet code as it's a bit different
case and all patches will go through me rather than Tony.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Now that the IAVF driver simply uses dev_alloc_page() + free_page() with
no custom recycling logics, it can easily be switched to using Page
Pool / libeth API instead.
This allows to removing the whole dancing around headroom, HW buffer
size, and page order. All DMA-for-device is now done in the PP core,
for-CPU -- in the libeth helper.
Use skb_mark_for_recycle() to bring back the recycling and restore the
performance. Speaking of performance: on par with the baseline and
faster with the PP optimization series applied. But the memory usage for
1500b MTU is now almost 2x lower (x86_64) thanks to allocating a page
every second descriptor.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Before replacing the Rx buffer management with libie, clean up
&iavf_ring a bit.
There are several fields not used anywhere in the code -- simply remove
them. Move ::tail up to remove a hole. Replace ::arm_wb boolean with
1-bit flag in ::flags to free 1 more byte. Finally, move ::prev_pkt_ctr
out of &iavf_tx_queue_stats -- it doesn't belong there (used for Tx
stall detection). Place it next to the stats on the ring itself to fill
the 4-byte slot.
The result: no holes and all the hot fields fit into the first 64-byte
cacheline.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add a couple intuitive helpers to hide Rx buffer implementation details
in the library and not multiplicate it between drivers. The settings are
sorta optimized for 100G+ NICs, but nothing really HW-specific here.
Use the new page_pool_dev_alloc() to dynamically switch between
split-page and full-page modes depending on MTU, page size, required
headroom etc. For example, on x86_64 with the default driver settings
each page is shared between 2 buffers. Turning on XDP (not in this
series) -> increasing headroom requirement pushes truesize out of 2048
boundary, leading to that each buffer starts getting a full page.
The "ceiling" limit is %PAGE_SIZE, as only order-0 pages are used to
avoid compound overhead. For the above architecture, this means maximum
linear frame size of 3712 w/o XDP.
Not that &libeth_buf_queue is not a complete queue/ring structure for
now, rather a shim, but eventually the libeth-enabled drivers will move
to it, with iavf being the first one.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Each driver is responsible for syncing buffers written by HW for CPU
before accessing them. Almost each PP-enabled driver uses the same
pattern, which could be shorthanded into a static inline to make driver
code a little bit more compact.
Introduce a simple helper which performs DMA synchronization for the
size passed from the driver. It can be used even when the pool doesn't
manage DMA-syncs-for-device, just make sure the page has a correct DMA
address set via page_pool_set_dma_addr().
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
There are several functions taking pointers to data they don't modify.
This includes statistics fetching, page and page_pool parameters, etc.
Constify the pointers, so that call sites will be able to pass const
pointers as well.
No functional changes, no visible changes in functions sizes.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
