Currently the rxe driver has three work queue tasks per qp. These are the
req.task, comp.task and resp.task which call rxe_requester(),
rxe_completer() and rxe_responder() respectively directly or on work
queues. Each of these subroutines checks to see if there is work to be
performed on the send queue or on the response packet queue or the request
packet queue and will run until there is no work remaining or yield the
cpu and reschedule itself until there is no work remaining.
This commit combines the req.task and comp.task into a single send.task
and renames the resp.task to the recv.task. The combined send.task calls
rxe_requester() and rxe_completer() serially and continues until all work
on both the send queue and the response packet queue are done.
In various benchmarks the performance is either improved or left the
same. At high scale there is a significant reduction in the load on the
cpu.
This is the first step in combining these two tasks. Once they are
serialized cross rescheduling of req.task and comp.task can be more
efficiently handled by just letting the send.task continue to run. This
will be done in the next several patches.
Link: https://lore.kernel.org/r/20240329145513.35381-7-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rxe_post_send_kernel() if the qp is in the error state after posting
the work requests the rxe_completer() task is scheduled.
But, the only way to move the qp into the error state is to call
rxe_qp_error() which also schedules the rxe_completer() task to drain the
queues. Calling it a second time has no effect. This commit removes the
redundant call.
Link: https://lore.kernel.org/r/20240329145513.35381-6-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A previous commit incorrectly added an 'if(!err)' before scheduling the
requester task in rxe_post_send_kernel(). But if there were send wrs
successfully added to the send queue before a bad wr they might never get
executed.
This commit fixes this by scheduling the requester task if any wqes were
successfully posted in rxe_post_send_kernel() in rxe_verbs.c.
Link: https://lore.kernel.org/r/20240329145513.35381-5-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Fixes: 5bf944f241 ("RDMA/rxe: Add error messages")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
In rxe_comp_queue_pkt() an incoming response packet skb is enqueued to the
resp_pkts queue and then a decision is made whether to run the completer
task inline or schedule it. Finally the skb is dereferenced to bump a 'hw'
performance counter. This is wrong because if the completer task is
already running in a separate thread it may have already processed the skb
and freed it which can cause a seg fault. This has been observed
infrequently in testing at high scale.
This patch fixes this by changing the order of enqueuing the packet until
after the counter is accessed.
Link: https://lore.kernel.org/r/20240329145513.35381-4-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Fixes: 0b1e5b99a4 ("IB/rxe: Add port protocol stats")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Initializing top_cpuset.relax_domain_level and setting
CS_SCHED_LOAD_BALANCE to top_cpuset.flags in cpuset_init() could be
completed at the time of top_cpuset definition by compiler.
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
This will address below -Wmissing-prototypes warnings:
arch/um/kernel/mem.c:202:8: warning: no previous prototype for ‘pgd_alloc’ [-Wmissing-prototypes]
arch/um/kernel/mem.c:215:7: warning: no previous prototype for ‘uml_kmalloc’ [-Wmissing-prototypes]
arch/um/kernel/process.c:207:6: warning: no previous prototype for ‘arch_cpu_idle’ [-Wmissing-prototypes]
arch/um/kernel/process.c:328:15: warning: no previous prototype for ‘arch_align_stack’ [-Wmissing-prototypes]
arch/um/kernel/reboot.c:45:6: warning: no previous prototype for ‘machine_restart’ [-Wmissing-prototypes]
arch/um/kernel/reboot.c:51:6: warning: no previous prototype for ‘machine_power_off’ [-Wmissing-prototypes]
arch/um/kernel/reboot.c:57:6: warning: no previous prototype for ‘machine_halt’ [-Wmissing-prototypes]
arch/um/kernel/skas/mmu.c:17:5: warning: no previous prototype for ‘init_new_context’ [-Wmissing-prototypes]
arch/um/kernel/skas/mmu.c:60:6: warning: no previous prototype for ‘destroy_context’ [-Wmissing-prototypes]
arch/um/kernel/skas/process.c:36:12: warning: no previous prototype for ‘start_uml’ [-Wmissing-prototypes]
arch/um/kernel/time.c:807:15: warning: no previous prototype for ‘calibrate_delay_is_known’ [-Wmissing-prototypes]
arch/um/kernel/tlb.c:594:6: warning: no previous prototype for ‘force_flush_all’ [-Wmissing-prototypes]
arch/x86/um/bugs_32.c:22:6: warning: no previous prototype for ‘arch_check_bugs’ [-Wmissing-prototypes]
arch/x86/um/bugs_32.c:44:6: warning: no previous prototype for ‘arch_examine_signal’ [-Wmissing-prototypes]
arch/x86/um/bugs_64.c:9:6: warning: no previous prototype for ‘arch_check_bugs’ [-Wmissing-prototypes]
arch/x86/um/bugs_64.c:13:6: warning: no previous prototype for ‘arch_examine_signal’ [-Wmissing-prototypes]
arch/x86/um/elfcore.c:10:12: warning: no previous prototype for ‘elf_core_extra_phdrs’ [-Wmissing-prototypes]
arch/x86/um/elfcore.c:15:5: warning: no previous prototype for ‘elf_core_write_extra_phdrs’ [-Wmissing-prototypes]
arch/x86/um/elfcore.c:42:5: warning: no previous prototype for ‘elf_core_write_extra_data’ [-Wmissing-prototypes]
arch/x86/um/elfcore.c:63:8: warning: no previous prototype for ‘elf_core_extra_data_size’ [-Wmissing-prototypes]
arch/x86/um/fault.c:18:5: warning: no previous prototype for ‘arch_fixup’ [-Wmissing-prototypes]
arch/x86/um/os-Linux/mcontext.c:7:6: warning: no previous prototype for ‘get_regs_from_mc’ [-Wmissing-prototypes]
arch/x86/um/os-Linux/tls.c:22:6: warning: no previous prototype for ‘check_host_supports_tls’ [-Wmissing-prototypes]
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Make it match the declaration in asm-generic/switch_to.h. And
also include the header to allow the compiler to check it.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
These functions are not used anymore. Removing them will also address
below -Wmissing-prototypes warnings:
arch/um/kernel/process.c:51:5: warning: no previous prototype for ‘pid_to_processor_id’ [-Wmissing-prototypes]
arch/um/kernel/process.c:253:5: warning: no previous prototype for ‘copy_to_user_proc’ [-Wmissing-prototypes]
arch/um/kernel/process.c:263:5: warning: no previous prototype for ‘clear_user_proc’ [-Wmissing-prototypes]
arch/um/kernel/tlb.c:579:6: warning: no previous prototype for ‘flush_tlb_mm_range’ [-Wmissing-prototypes]
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
The definition of vfree has changed since commit b3bdda02aa
("vmalloc: add const to void* parameters"). Update the declaration
of vfree in um_malloc.h to match the latest definition.
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
This will also fix the warnings like:
warning: no previous prototype for ‘fork_handler’ [-Wmissing-prototypes]
140 | void fork_handler(void)
| ^~~~~~~~~~~~
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
When kmalloc_array() fails to allocate memory, the ubd_init()
should return -ENOMEM instead of -1. So, fix it.
Fixes: f88f0bdfc3 ("um: UBD Improvements")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Richard Weinberger <richard@nod.at>
The introduction of support for the external VDD_GFX supply in SA8295P
ADP unearthed a lockdep problem in the GDSC code w.r.t regulator
supplies. Make the regulator optional, to avoid creating a dummy
regulator, on those boards that doesn't use this. While not solving the
root cause of the problem, it reduces the impact of the lockdep warning
- and it avoids wasting resources.
Refactoring of the RPM clock driver accidentally removed num_clks from
msm8976. Reintroduce this to get the clocks back.
-----BEGIN PGP SIGNATURE-----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=pzdH
-----END PGP SIGNATURE-----
Merge tag 'qcom-clk-fixes-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-fixes
Pull Qualcomm clk driver fixes from Bjorn Andersson:
The introduction of support for the external VDD_GFX supply in SA8295P
ADP unearthed a lockdep problem in the GDSC code w.r.t regulator
supplies. Make the regulator optional, to avoid creating a dummy
regulator, on those boards that doesn't use this. While not solving the
root cause of the problem, it reduces the impact of the lockdep warning
- and it avoids wasting resources.
Refactoring of the RPM clock driver accidentally removed num_clks from
msm8976. Reintroduce this to get the clocks back.
* tag 'qcom-clk-fixes-for-6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
clk: qcom: smd-rpm: Restore msm8976 num_clk
clk: qcom: gdsc: treat optional supplies as optional
By default CT code was passing just payload of the G2H event
message, while Relay code expects full G2H message including
HXG header which contains DATA0 field. Fix that.
Fixes: 26d4481ac2 ("drm/xe/guc: Start handling GuC Relay event messages")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419150351.358-1-michal.wajdeczko@intel.com
This function is using internal helper pf_get_spare_ggtt() that
expects PF's master mutex to be locked. Fix that.
Fixes: ac6598aed1 ("drm/xe/pf: Add support to configure SR-IOV VFs")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419141000.314-1-michal.wajdeczko@intel.com
Add a new test case for the drm buddy clear and dirty
allocation.
v2:(Matthew)
- make size as u32
- rename PAGE_SIZE with SZ_4K
- dont fragment the address space for all the order allocation
iterations. we can do it once and just increment and allocate
the size.
- create new mm with non power-of-two size to ensure the multi-root
force_merge during fini.
v3:
- add randomness in size calculation(Matthew)
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419063538.11957-3-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Add clear page support in vram memory region.
v1(Christian):
- Dont handle clear page as TTM flag since when moving the BO back
in from GTT again we don't need that.
- Make a specialized version of amdgpu_fill_buffer() which only
clears the VRAM areas which are not already cleared
- Drop the TTM_PL_FLAG_WIPE_ON_RELEASE check in
amdgpu_object.c
v2:
- Modify the function name amdgpu_ttm_* (Alex)
- Drop the delayed parameter (Christian)
- handle amdgpu_res_cleared(&cursor) just above the size
calculation (Christian)
- Use AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE for clearing the buffers
in the free path to properly wait for fences etc.. (Christian)
v3(Christian):
- Remove buffer clear code in VRAM manager instead change the
AMDGPU_GEM_CREATE_VRAM_WIPE_ON_RELEASE handling to set
the DRM_BUDDY_CLEARED flag.
- Remove ! from amdgpu_res_cleared(&cursor) check.
v4(Christian):
- vres flag setting move to vram manager file
- use dma_fence_get_stub in amdgpu_ttm_clear_buffer function
- make fence a mandatory parameter and drop the if and the get/put dance
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Acked-by: Felix Kuehling <felix.kuehling@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419063538.11957-2-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
- Add tracking clear page feature.
- Driver should enable the DRM_BUDDY_CLEARED flag if it
successfully clears the blocks in the free path. On the otherhand,
DRM buddy marks each block as cleared.
- Track the available cleared pages size
- If driver requests cleared memory we prefer cleared memory
but fallback to uncleared if we can't find the cleared blocks.
when driver requests uncleared memory we try to use uncleared but
fallback to cleared memory if necessary.
- When a block gets freed we clear it and mark the freed block as cleared,
when there are buddies which are cleared as well we can merge them.
Otherwise, we prefer to keep the blocks as separated.
- Add a function to support defragmentation.
v1:
- Depends on the flag check DRM_BUDDY_CLEARED, enable the block as
cleared. Else, reset the clear flag for each block in the list(Christian)
- For merging the 2 cleared blocks compare as below,
drm_buddy_is_clear(block) != drm_buddy_is_clear(buddy)(Christian)
- Defragment the memory beginning from min_order
till the required memory space is available.
v2: (Matthew)
- Add a wrapper drm_buddy_free_list_internal for the freeing of blocks
operation within drm buddy.
- Write a macro block_incompatible() to allocate the required blocks.
- Update the xe driver for the drm_buddy_free_list change in arguments.
- add a warning if the two blocks are incompatible on
defragmentation
- call full defragmentation in the fini() function
- place a condition to test if min_order is equal to 0
- replace the list with safe_reverse() variant as we might
remove the block from the list.
v3:
- fix Gitlab user reported lockup issue.
- Keep DRM_BUDDY_HEADER_CLEAR define sorted(Matthew)
- modify to pass the root order instead max_order in fini()
function(Matthew)
- change bool 1 to true(Matthew)
- add check if min_block_size is power of 2(Matthew)
- modify the min_block_size datatype to u64(Matthew)
v4:
- rename the function drm_buddy_defrag with __force_merge.
- Include __force_merge directly in drm buddy file and remove
the defrag use in amdgpu driver.
- Remove list_empty() check(Matthew)
- Remove unnecessary space, headers and placement of new variables(Matthew)
- Add a unit test case(Matthew)
v5:
- remove force merge support to actual range allocation and not to bail
out when contains && split(Matthew)
- add range support to force merge function.
v6:
- modify the alloc_range() function clear page non merged blocks
allocation(Matthew)
- correct the list_insert function name(Matthew).
Signed-off-by: Arunpravin Paneer Selvam <Arunpravin.PaneerSelvam@amd.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Suggested-by: Christian König <christian.koenig@amd.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240419063538.11957-1-Arunpravin.PaneerSelvam@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
If IORING_OP_RECV is used with provided buffers, the caller may also set
IORING_RECVSEND_BUNDLE to turn it into a multi-buffer recv. This grabs
buffers available and receives into them, posting a single completion for
all of it.
This can be used with multishot receive as well, or without it.
Now that both send and receive support bundles, add a feature flag for
it as well. If IORING_FEAT_RECVSEND_BUNDLE is set after registering the
ring, then the kernel supports bundles for recv and send.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If IORING_OP_SEND is used with provided buffers, the caller may also
set IORING_RECVSEND_BUNDLE to turn it into a multi-buffer send. The idea
is that an application can fill outgoing buffers in a provided buffer
group, and then arm a single send that will service them all. Once
there are no more buffers to send, or if the requested length has
been sent, the request posts a single completion for all the buffers.
This only enables it for IORING_OP_SEND, IORING_OP_SENDMSG is coming
in a separate patch. However, this patch does do a lot of the prep
work that makes wiring up the sendmsg variant pretty trivial. They
share the prep side.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Our provided buffer interface only allows selection of a single buffer.
Add an API that allows getting/peeking multiple buffers at the same time.
This is only implemented for the ring provided buffers. It could be added
for the legacy provided buffers as well, but since it's strongly
encouraged to use the new interface, let's keep it simpler and just
provide it for the new API. The legacy interface will always just select
a single buffer.
There are two new main functions:
io_buffers_select(), which selects up as many buffers as it can. The
caller supplies the iovec array, and io_buffers_select() may allocate a
bigger array if the 'out_len' being passed in is non-zero and bigger
than what fits in the provided iovec. Buffers grabbed with this helper
are permanently assigned.
io_buffers_peek(), which works like io_buffers_select(), except they can
be recycled, if needed. Callers using either of these functions should
call io_put_kbufs() rather than io_put_kbuf() at completion time. The
peek interface must be called with the ctx locked from peek to
completion.
This add a bit state for the request:
- REQ_F_BUFFERS_COMMIT, which means that the the buffers have been
peeked and should be committed to the buffer ring head when they are
put as part of completion. Prior to this, req->buf_list was cleared to
NULL when committed.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's pretty trivial to wire up provided buffer support for the send
side, just like how it's done the receive side. This enables setting up
a buffer ring that an application can use to push pending sends to,
and then have a send pick a buffer from that ring.
One of the challenges with async IO and networking sends is that you
can get into reordering conditions if you have more than one inflight
at the same time. Consider the following scenario where everything is
fine:
1) App queues sendA for socket1
2) App queues sendB for socket1
3) App does io_uring_submit()
4) sendA is issued, completes successfully, posts CQE
5) sendB is issued, completes successfully, posts CQE
All is fine. Requests are always issued in-order, and both complete
inline as most sends do.
However, if we're flooding socket1 with sends, the following could
also result from the same sequence:
1) App queues sendA for socket1
2) App queues sendB for socket1
3) App does io_uring_submit()
4) sendA is issued, socket1 is full, poll is armed for retry
5) Space frees up in socket1, this triggers sendA retry via task_work
6) sendB is issued, completes successfully, posts CQE
7) sendA is retried, completes successfully, posts CQE
Now we've sent sendB before sendA, which can make things unhappy. If
both sendA and sendB had been using provided buffers, then it would look
as follows instead:
1) App queues dataA for sendA, queues sendA for socket1
2) App queues dataB for sendB queues sendB for socket1
3) App does io_uring_submit()
4) sendA is issued, socket1 is full, poll is armed for retry
5) Space frees up in socket1, this triggers sendA retry via task_work
6) sendB is issued, picks first buffer (dataA), completes successfully,
posts CQE (which says "I sent dataA")
7) sendA is retried, picks first buffer (dataB), completes successfully,
posts CQE (which says "I sent dataB")
Now we've sent the data in order, and everybody is happy.
It's worth noting that this also opens the door for supporting multishot
sends, as provided buffers would be a prerequisite for that. Those can
trigger either when new buffers are added to the outgoing ring, or (if
stalled due to lack of space) when space frees up in the socket.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is just moving io_recv_prep_retry() higher up so it can get used
for sends as well, and rename it to be generically useful for both
sends and receives.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When redirecting a packet using XDP, the bpf_redirect_map() helper will set
up the redirect destination information in struct bpf_redirect_info (using
the __bpf_xdp_redirect_map() helper function), and the xdp_do_redirect()
function will read this information after the XDP program returns and pass
the frame on to the right redirect destination.
When using the BPF_F_BROADCAST flag to do multicast redirect to a whole
map, __bpf_xdp_redirect_map() sets the 'map' pointer in struct
bpf_redirect_info to point to the destination map to be broadcast. And
xdp_do_redirect() reacts to the value of this map pointer to decide whether
it's dealing with a broadcast or a single-value redirect. However, if the
destination map is being destroyed before xdp_do_redirect() is called, the
map pointer will be cleared out (by bpf_clear_redirect_map()) without
waiting for any XDP programs to stop running. This causes xdp_do_redirect()
to think that the redirect was to a single target, but the target pointer
is also NULL (since broadcast redirects don't have a single target), so
this causes a crash when a NULL pointer is passed to dev_map_enqueue().
To fix this, change xdp_do_redirect() to react directly to the presence of
the BPF_F_BROADCAST flag in the 'flags' value in struct bpf_redirect_info
to disambiguate between a single-target and a broadcast redirect. And only
read the 'map' pointer if the broadcast flag is set, aborting if that has
been cleared out in the meantime. This prevents the crash, while keeping
the atomic (cmpxchg-based) clearing of the map pointer itself, and without
adding any more checks in the non-broadcast fast path.
Fixes: e624d4ed4a ("xdp: Extend xdp_redirect_map with broadcast support")
Reported-and-tested-by: syzbot+af9492708df9797198d6@syzkaller.appspotmail.com
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://lore.kernel.org/r/20240418071840.156411-1-toke@redhat.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
commit 2f4a4d63a1 ("ACPI: CPPC: Use access_width over bit_width for system
memory accesses") modified cpc_read()/cpc_write() to use access_width to
read CPC registers.
However, for PCC registers the access width field in the ACPI register
macro specifies the PCC subspace ID. For non-zero PCC subspace ID it is
incorrectly treated as access width. This causes errors when reading
from PCC registers in the CPPC driver.
For PCC registers, base the size of read/write on the bit width field.
The debug message in cpc_read()/cpc_write() is updated to print relevant
information for the address space type used to read the register.
Fixes: 2f4a4d63a1 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Tested-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Jarred White <jarredwhite@linux.microsoft.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 2f4a4d63a1 ("ACPI: CPPC: Use access_width over bit_width for
system memory accesses") neglected to properly wrap the bit_offset shift
when it comes to applying the mask. This may cause incorrect values to be
read and may cause the cpufreq module not be loaded.
[ 11.059751] cpu_capacity: CPU0 missing/invalid highest performance.
[ 11.066005] cpu_capacity: partial information: fallback to 1024 for all CPUs
Also, corrected the bitmask generation in GENMASK (extra bit being added).
Fixes: 2f4a4d63a1 ("ACPI: CPPC: Use access_width over bit_width for system memory accesses")
Signed-off-by: Jarred White <jarredwhite@linux.microsoft.com>
Cc: 5.15+ <stable@vger.kernel.org> # 5.15+
Reviewed-by: Vanshidhar Konda <vanshikonda@os.amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
tracking down regressions.
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEIw+MvkEiF49krdp9F0NaE2wMflgFAmYmeN4PHGNvcmJldEBs
d24ubmV0AAoJEBdDWhNsDH5YtzcH/1plJvgfTDMWZWoOgNuPSiExWFgqoWk3KyDw
hqBfQ0p5QvTnC/rQx8mgGP3EqUXegwFHormRT2oSNyCSBHBSMdJU5ZT/WOp4rDpa
NvjM7FurBhb3b83ieottl6dDxnbUiRy6+z/uayEeV03KEolL7/nljfBozg9282Ep
p6cc4D5zwNcYdeqEom32AVOPFUUtQAvPhGj4OUHBwjzn7WF2lfzb4z4RudmsyE5E
1Whd35HEOpKsNlosy9XJ8ZP/QHAb0Nkwdg2irT71lZ+37nUX/KgMxFuJUxviYI9m
4jtZsjRew7RS/EUtwbUsyD4DTXla0N2H+//ZF5AatRz8RuQKZgQ=
=A/2u
-----END PGP SIGNATURE-----
Merge tag 'docs-6.9-fixes2' of git://git.lwn.net/linux
Pull documentation fixes from Jonathan Corbet:
"A set of updates from Thorsten to his (new) guide to verifying bugs
and tracking down regressions"
* tag 'docs-6.9-fixes2' of git://git.lwn.net/linux:
docs: verify/bisect: stable regressions: first stable, then mainline
docs: verify/bisect: describe how to use a build host
docs: verify/bisect: explain testing reverts, patches and newer code
docs: verify/bisect: proper headlines and more spacing
docs: verify/bisect: add and fetch stable branches ahead of time
docs: verify/bisect: use git switch, tag kernel, and various fixes
The MWAITX and MONITORX instructions generate the same #VC error code as
the MWAIT and MONITOR instructions, respectively. Update the #VC handler
opcode checking to also support the MWAITX and MONITORX opcodes.
Fixes: e3ef461af3 ("x86/sev: Harden #VC instruction emulation somewhat")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/453d5a7cfb4b9fe818b6fb67f93ae25468bc9e23.1713793161.git.thomas.lendacky@amd.com
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to depend on HAS_IOPORT even when compile
testing only.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Listed devices need the override for the keyboard to work.
Signed-off-by: Christoffer Sandberg <cs@tuxedo.de>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The XM APEX 17 M23 (TongFang?) GMxBGxx (got using `sudo dmidecode -s
baseboard-product-name`) needs IRQ overriding for the keyboard to work.
Adding an entry for this laptop to the override_table makes the internal
keyboard functional [1].
Successfully tested with Arch Linux Kernel v6.8 under Manjaro Linux v23.1.4.
Link: https://www.reddit.com/r/XMG_gg/comments/15kd5pg/xmg_apex_17_m23_keyboard_not_working_on_linux/ # [1]
Signed-off-by: Guenter Schafranek <gschafra@web.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A recent change to cxl_mem_get_records_log() [1] highlighted a subtle
nuance of looping calls to cxl_internal_send_cmd(), i.e. that
cxl_internal_send_cmd() modifies the 'size_out' member of the @mbox_cmd
argument. That mechanism is useful for communicating underflow, but it
is unwanted when reusing @mbox_cmd for a subsequent submission. It turns
out that cxl_xfer_log() avoids this scenario by always redefining
@mbox_cmd each iteration.
Update cxl_mem_get_records_log() and cxl_mem_get_poison() to follow the
same style as cxl_xfer_log(), i.e. re-define @mbox_cmd each iteration.
The cxl_mem_get_records_log() change is just a style fixup, but the
cxl_mem_get_poison() change is a potential fix, per Alison [2]:
Poison list retrieval can hit this case if the MORE flag is set and
a follow on read of the list delivers more records than the previous
read. ie. device gives one record, sets the _MORE flag, then gives 5.
Not an urgent fix since this behavior has not been seen in the wild,
but worth tracking as a fix.
Cc: Kwangjin Ko <kwangjin.ko@sk.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Fixes: ed83f7ca39 ("cxl/mbox: Add GET_POISON_LIST mailbox command")
Link: http://lore.kernel.org/r/20240402081404.1106-2-kwangjin.ko@sk.com [1]
Link: http://lore.kernel.org/r/ZhAhAL/GOaWFrauw@aschofie-mobl2 [2]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/171235441633.2716581.12330082428680958635.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Fixes the following Coccinelle/coccicheck warning reported by
string_choices.cocci:
opportunity for str_plural(days)
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240328140015.388654-3-thorsten.blum@toblux.com
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
forceuid/forcegid should be enabled by default when uid=/gid= options are
specified, but commit 24e0a1eff9 ("cifs: switch to new mount api")
changed the behavior. Due to the change, a mounted share does not show
intentional uid/gid for files and directories even though uid=/gid=
options are specified since forceuid/forcegid are not enabled.
This patch reinstates original behavior that overrides uid/gid with
specified uid/gid by the options.
Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Signed-off-by: Takayuki Nagata <tnagata@redhat.com>
Acked-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Acked-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Found the following typos in comments, and fixed them:
s/unpriviledged/unprivileged/
s/reponsible/responsible/
s/possiblities/possibilities/
s/Divison/Division/
s/precsion/precision/
s/havea/have a/
s/reponsible/responsible/
s/responsibile/responsible/
s/tigher/tighter/
s/respecitve/respective/
Signed-off-by: Rafael Passos <rafael@rcpassos.me>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/6af7deb4-bb24-49e8-b3f1-8dd410597337@smtp-relay.sendinblue.com
AMD-Xilinx Versal platform is successor of ZynqMP platform.
Real-time Processing Unit R5 cluster IP on Versal is same as
of ZynqMP Platform. Power-domains ids for Versal platform is
different than ZynqMP.
AMD-Xilinx Versal-NET platform is successor of Versal platform.
Versal-NET Real-Time Processing Unit has two clusters and each
cluster contains dual core ARM Cortex-R52 processors. Each R52
core is assigned 128KB of TCM memory.
Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
Link: https://lore.kernel.org/r/20240418220125.744322-1-tanmay.shah@amd.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Detect and mitigate inode collsions that now occur since we
fixed 9p generating duplicate inode structures. Underlying
cause of these appears to be a race condition between reuse
of inode numbers in underlying file system and cleanup of
inode numbers in the client. Enabling caching
makes this much more likely to happen as it increases cleanup
latency due to writebacks.
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
The current implementation of the mov instruction with sign extension has the
following problems:
1. It clobbers the source register if it is not stacked because it
sign extends the source and then moves it to the destination.
2. If the dst_reg is stacked, the current code doesn't write the value
back in case of 64-bit mov.
3. There is room for improvement by emitting fewer instructions.
The steps for fixing this and the instructions emitted by the JIT are explained
below with examples in all combinations:
Case A: offset == 32:
=====================
Case A.1: src and dst are stacked registers:
--------------------------------------------
1. Load src_lo into tmp_lo
2. Store tmp_lo into dst_lo
3. Sign extend tmp_lo into tmp_hi
4. Store tmp_hi to dst_hi
Example: r3 = (s32)r3
r3 is a stacked register
ldr r6, [r11, #-16] // Load r3_lo into tmp_lo
// str to dst_lo is not emitted because src_lo == dst_lo
asr r7, r6, #31 // Sign extend tmp_lo into tmp_hi
str r7, [r11, #-12] // Store tmp_hi into r3_hi
Case A.2: src is stacked but dst is not:
----------------------------------------
1. Load src_lo into dst_lo
2. Sign extend dst_lo into dst_hi
Example: r6 = (s32)r3
r6 maps to {ARM_R5, ARM_R4} and r3 is stacked
ldr r4, [r11, #-16] // Load r3_lo into r6_lo
asr r5, r4, #31 // Sign extend r6_lo into r6_hi
Case A.3: src is not stacked but dst is stacked:
------------------------------------------------
1. Store src_lo into dst_lo
2. Sign extend src_lo into tmp_hi
3. Store tmp_hi to dst_hi
Example: r3 = (s32)r6
r3 is stacked and r6 maps to {ARM_R5, ARM_R4}
str r4, [r11, #-16] // Store r6_lo to r3_lo
asr r7, r4, #31 // Sign extend r6_lo into tmp_hi
str r7, [r11, #-12] // Store tmp_hi to dest_hi
Case A.4: Both src and dst are not stacked:
-------------------------------------------
1. Mov src_lo into dst_lo
2. Sign extend src_lo into dst_hi
Example: (bf) r6 = (s32)r6
r6 maps to {ARM_R5, ARM_R4}
// Mov not emitted because dst == src
asr r5, r4, #31 // Sign extend r6_lo into r6_hi
Case B: offset != 32:
=====================
Case B.1: src and dst are stacked registers:
--------------------------------------------
1. Load src_lo into tmp_lo
2. Sign extend tmp_lo according to offset.
3. Store tmp_lo into dst_lo
4. Sign extend tmp_lo into tmp_hi
5. Store tmp_hi to dst_hi
Example: r9 = (s8)r3
r9 and r3 are both stacked registers
ldr r6, [r11, #-16] // Load r3_lo into tmp_lo
lsl r6, r6, #24 // Sign extend tmp_lo
asr r6, r6, #24 // ..
str r6, [r11, #-56] // Store tmp_lo to r9_lo
asr r7, r6, #31 // Sign extend tmp_lo to tmp_hi
str r7, [r11, #-52] // Store tmp_hi to r9_hi
Case B.2: src is stacked but dst is not:
----------------------------------------
1. Load src_lo into dst_lo
2. Sign extend dst_lo according to offset.
3. Sign extend tmp_lo into dst_hi
Example: r6 = (s8)r3
r6 maps to {ARM_R5, ARM_R4} and r3 is stacked
ldr r4, [r11, #-16] // Load r3_lo to r6_lo
lsl r4, r4, #24 // Sign extend r6_lo
asr r4, r4, #24 // ..
asr r5, r4, #31 // Sign extend r6_lo into r6_hi
Case B.3: src is not stacked but dst is stacked:
------------------------------------------------
1. Sign extend src_lo into tmp_lo according to offset.
2. Store tmp_lo into dst_lo.
3. Sign extend src_lo into tmp_hi.
4. Store tmp_hi to dst_hi.
Example: r3 = (s8)r1
r3 is stacked and r1 maps to {ARM_R3, ARM_R2}
lsl r6, r2, #24 // Sign extend r1_lo to tmp_lo
asr r6, r6, #24 // ..
str r6, [r11, #-16] // Store tmp_lo to r3_lo
asr r7, r6, #31 // Sign extend tmp_lo to tmp_hi
str r7, [r11, #-12] // Store tmp_hi to r3_hi
Case B.4: Both src and dst are not stacked:
-------------------------------------------
1. Sign extend src_lo into dst_lo according to offset.
2. Sign extend dst_lo into dst_hi.
Example: r6 = (s8)r1
r6 maps to {ARM_R5, ARM_R4} and r1 maps to {ARM_R3, ARM_R2}
lsl r4, r2, #24 // Sign extend r1_lo to r6_lo
asr r4, r4, #24 // ..
asr r5, r4, #31 // Sign extend r6_lo to r6_hi
Fixes: fc832653fa ("arm32, bpf: add support for sign-extension mov instruction")
Reported-by: syzbot+186522670e6722692d86@syzkaller.appspotmail.com
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Closes: https://lore.kernel.org/all/000000000000e9a8d80615163f2a@google.com
Link: https://lore.kernel.org/bpf/20240419182832.27707-1-puranjay@kernel.org
To allow us extending the interface in the future.
Fixes: 44350256ab ("fuse: implement ioctls to manage backing files")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
