update_timer_sys() and update_timer_mcck() are inlines used for
CPU time accounting from the interrupt and machine-check handlers.
These routines are specific to s390 architecture, but included
via <linux/vtime.h> header implicitly. Avoid the extra loop and
include <asm/vtime.h> header directly.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Link: https://lore.kernel.org/r/3fb696637c0eb7e9d6ffd6cbf9e647d7c5986b3d.1712760275.git.agordeev@linux.ibm.com
The generic vtime_task_switch() implementation gets built only
if __ARCH_HAS_VTIME_TASK_SWITCH is not defined, but requires an
architecture to implement arch_vtime_task_switch() callback at
the same time, which is confusing.
Further, arch_vtime_task_switch() is implemented for 32-bit PowerPC
architecture only and vtime_task_switch() generic variant is rather
superfluous.
Simplify the whole vtime_task_switch() wiring by moving the existing
generic implementation to PowerPC.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2cb6e3caada93623f6d4f78ad938ac6cd0e2fda8.1712760275.git.agordeev@linux.ibm.com
Callback arch_vtime_task_switch() is only defined when
CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is selected. Yet, the
function prototype forward declaration is present for
CONFIG_VIRT_CPU_ACCOUNTING_GEN variant. Remove it.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Link: https://lore.kernel.org/r/783d7c611864f82b0fb9edf01890b9396f3a549a.1712760275.git.agordeev@linux.ibm.com
When an UART is opened that still has .throttled set from a previous
open, the RX interrupt is enabled but the irq handler doesn't consider
it. This easily results in a stuck irq with the effect to occupy the CPU
in a tight loop.
So reset the throttle state in .startup() to ensure that RX irqs are
handled.
Fixes: d1ec8a2eab ("serial: stm32: update throttle and unthrottle ops for dma mode")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/a784f80d3414f7db723b2ec66efc56e1ad666cbf.1713344161.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If there is a stuck irq that the handler doesn't address, returning
IRQ_HANDLED unconditionally makes it impossible for the irq core to
detect the problem and disable the irq. So only return IRQ_HANDLED if
an event was handled.
A stuck irq is still problematic, but with this change at least it only
makes the UART nonfunctional instead of occupying the (usually only) CPU
by 100% and so stall the whole machine.
Fixes: 48a6092fb4 ("serial: stm32-usart: Add STM32 USART Driver")
Cc: stable@vger.kernel.org
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/5f92603d0dfd8a5b8014b2b10a902d91e0bb881f.1713344161.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a check to make sure that the requested xattr node size is no larger
than the eraseblock minus the cleanmarker.
Unlike the usual inode nodes, the xattr nodes aren't split into parts
and spread across multiple eraseblocks, which means that a xattr node
must not occupy more than one eraseblock. If the requested xattr value is
too large, the xattr node can spill onto the next eraseblock, overwriting
the nodes and causing errors such as:
jffs2: argh. node added in wrong place at 0x0000b050(2)
jffs2: nextblock 0x0000a000, expected at 0000b00c
jffs2: error: (823) do_verify_xattr_datum: node CRC failed at 0x01e050,
read=0xfc892c93, calc=0x000000
jffs2: notice: (823) jffs2_get_inode_nodes: Node header CRC failed
at 0x01e00c. {848f,2fc4,0fef511f,59a3d171}
jffs2: Node at 0x0000000c with length 0x00001044 would run over the
end of the erase block
jffs2: Perhaps the file system was created with the wrong erase size?
jffs2: jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found
at 0x00000010: 0x1044 instead
This breaks the filesystem and can lead to KASAN crashes such as:
BUG: KASAN: slab-out-of-bounds in jffs2_sum_add_kvec+0x125e/0x15d0
Read of size 4 at addr ffff88802c31e914 by task repro/830
CPU: 0 PID: 830 Comm: repro Not tainted 6.9.0-rc3+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS Arch Linux 1.16.3-1-1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0xc6/0x120
print_report+0xc4/0x620
? __virt_addr_valid+0x308/0x5b0
kasan_report+0xc1/0xf0
? jffs2_sum_add_kvec+0x125e/0x15d0
? jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_sum_add_kvec+0x125e/0x15d0
jffs2_flash_direct_writev+0xa8/0xd0
jffs2_flash_writev+0x9c9/0xef0
? __x64_sys_setxattr+0xc4/0x160
? do_syscall_64+0x69/0x140
? entry_SYSCALL_64_after_hwframe+0x76/0x7e
[...]
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: aa98d7cf59 ("[JFFS2][XATTR] XATTR support on JFFS2 (version. 5)")
Signed-off-by: Ilya Denisyev <dev@elkcl.ru>
Link: https://lore.kernel.org/r/20240412155357.237803-1-dev@elkcl.ru
Signed-off-by: Christian Brauner <brauner@kernel.org>
The 16550a serial port based on the ACPI table requires obtaining the
reg-shift attribute. In the ACPI scenario, If the reg-shift property
is not configured like in DTS, the 16550a serial driver cannot read or
write controller registers properly during initialization.
Signed-off-by: Guanbing Huang <albanhuang@tencent.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bing Fan <tombinfan@tencent.com>
Tested-by: Linheng Du <dylanlhdu@tencent.com>
Link: https://lore.kernel.org/r/4726ecea8f7bfbfe42501b4f6ad9fe5b38994574.1713234515.git.albanhuang@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function __uart_read_properties doesn't cover PNP devices, so add IRQ
processing for PNP devices in the branch.
Signed-off-by: Guanbing Huang <albanhuang@tencent.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Bing Fan <tombinfan@tencent.com>
Tested-by: Linheng Du <dylanlhdu@tencent.com>
Link: https://lore.kernel.org/r/7f4ca31ef1cab4c6ecad22fafd82117686b696be.1713234515.git.albanhuang@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add dev_is_pnp() macro to determine whether the device is a PNP device.
Signed-off-by: Guanbing Huang <albanhuang@tencent.com>
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Bing Fan <tombinfan@tencent.com>
Tested-by: Linheng Du <dylanlhdu@tencent.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/4e68f5557ad53b671ca8103e572163eca52a8f29.1713234515.git.albanhuang@tencent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
dw8250_serial_inq() uses unsigned int variable to store 8-bit value.
Due to that it needs a cast which can be avoided by switching to use
u8 instead of unsigned int.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240412173937.187442-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
By waiting at most 1 second for USR2_TXDC to be set, we avoid a potential
deadlock.
In case of the timeout, there is not much we can do, so we simply ignore
the transmitter state and optimistically try to continue.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Link: https://lore.kernel.org/r/919647898c337a46604edcabaf13d42d80c0915d.1712837613.git.esben@geanix.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After conversion to the kfifo, it becomes possible to extract two helper
functions for better maintenance and code deduplication. Do it here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240409174057.1104262-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pengfei Xu reports, that the -next commit 1788cf6a91 (tty: serial:
switch from circ_buf to kfifo) tries to emit a WARNING and that leads to
lockdep errors. Obviously we cannot print anything from uart_put_char()!
This WARN_ON_ONCE() was/is a debug aid to check if the condition in
uart_put_char() can happen at all. Pengfei Xu confirmed it can. Unlike
me and kbuild bot in my queue.
Second, I completely forgot about it, so I did not remove it in the
final version, nor mentioned it in the commit log.
Drop it now as we are all good. And we even have stack traces (and a
reproducer)!
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Link: https://lore.kernel.org/r/20240416071904.21440-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PM8901 is used alongside the APQ8060/MSM8660 on the APQ8060 Dragonboard
and HP TouchPad. It works the same as all others, so just add the
compatible string for this variant.
Signed-off-by: Herman van Hazendonk <github.com@herrie.org>
Message-ID: <20240417073532.3718510-1-github.com@herrie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Netfilter tests have been moved to a subdir under selftests/net by
patch series [1]. Fix the path in selftests/Makefile accordingly.
This helps fix the following error:
tools/testing/selftests$ make
...
make[1]: Entering directory 'tools/testing/selftests'
make[1]: *** netfilter: No such file or directory. Stop.
make[1]: Leaving directory 'tools/testing/selftests'
[1] https://lore.kernel.org/all/20240411233624.8129-1-fw@strlen.de/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mediatek-ge PHY driver already disables EEE advertisement on the switch
PHYs but my testing [1] shows that it is somehow enabled afterwards.
Disabling EEE advertisement before the PHY driver initialises keeps it off.
Therefore, remove disabling EEE advertisement here as it's useless.
Link: https://lore.kernel.org/netdev/d286ea27-e911-4dcb-9037-b75f22b437b8@arinc9.com/ [1]
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hex value will be easier to match hardware register bits layout,
so same as pinconf_generic_dump_config, print hex value.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Message-ID: <20240412005128.2937486-1-peng.fan@oss.nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Fix a dtbs_check warning on RZ/G3S,
- Fix a lockdep warning on RZ/G2L.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCZhkDAgAKCRCKwlD9ZEnx
cA0nAQC3qUp+KQ9D53F1Mr5FdQd4GhNsqEG/iFxHkkrlKLyMwQEA7nQHcu2xseeS
7C4wQROe2+DNdks5u3ye7IA7YtntYgY=
=wObz
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-fixes-for-v6.9-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into fixes
pinctrl: renesas: Fixes for v6.9
- Fix a dtbs_check warning on RZ/G3S,
- Fix a lockdep warning on RZ/G2L.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240411064614.7409-5-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Message-ID: <20240411064614.7409-4-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240411064614.7409-3-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20240411064614.7409-2-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table. Pin controllers are
considered core components, so usually they are built-in, however these
can be built and used as modules on some generic kernel.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Message-ID: <20240411064614.7409-1-krzk@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We only need DMC wakelocks when we allow DC5 and DC6 states. Add the
calls to enable and disable DMC wakelock accordingly.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-5-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This feature should be disabled by default until properly tested and
mature. Add a module parameter to enable the feature for testing,
while keeping it disabled by default for now.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-4-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Only allow running DMC wakelock code if the display version is 20 or
greater. Also check if DMC is loaded before enabling.
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-3-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In order to reduce the DC5->DC2 restore time, wakelocks have been
introduced in DMC so the driver can tell it when registers and other
memory areas are going to be accessed and keep their respective blocks
awake.
Implement this in the driver by adding the concept of DMC wakelocks.
When the driver needs to access memory which lies inside pre-defined
ranges, it will tell DMC to set the wakelock, access the memory, then
wait for a while and clear the wakelock.
The wakelock state is protected in the driver with spinlocks to
prevent concurrency issues.
BSpec: 71583
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412094148.808179-2-luciano.coelho@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Merge branch 'mr7530-fixes'
Arınç ÜNAL says:
====================
Fix port mirroring on MT7530 DSA subdriver
This patch series fixes the frames received on the local port (monitor
port) not being mirrored, and port mirroring for the MT7988 SoC switch.
====================
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
The "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open Version)
v0.1" document shows bits 16 to 18 as the MIRROR_PORT field of the CPU
forward control register. Currently, the MT7530 DSA subdriver configures
bits 0 to 2 of the CPU forward control register which breaks the port
mirroring feature for the MT7988 SoC switch.
Fix this by using the MT7531_MIRROR_PORT_GET() and MT7531_MIRROR_PORT_SET()
macros which utilise the correct bits.
Fixes: 110c18bfed ("net: dsa: mt7530: introduce driver for MT7988 built-in switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This switch intellectual property provides a bit on the ARL global control
register which controls allowing mirroring frames which are received on the
local port (monitor port). This bit is unset after reset.
This ability must be enabled to fully support the port mirroring feature on
this switch intellectual property.
Therefore, this patch fixes the traffic not being reflected on a port,
which would be configured like below:
tc qdisc add dev swp0 clsact
tc filter add dev swp0 ingress matchall skip_sw \
action mirred egress mirror dev swp0
As a side note, this configuration provides the hairpinning feature for a
single port.
Fixes: 37feab6076 ("net: dsa: mt7530: add support for port mirroring")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This function is supposed to return a uid on success, and an errno in
failure.
But it currently returns the return value of the specific cmd version
handler, which in turn returns 0 on success and errno otherwise.
This means that on success, iwl_mvm_build_scan_cmd will return 0
regardless if the actual uid.
Fix this by returning the uid if the handler succeeded.
Fixes: 687db6ff5b ("iwlwifi: scan: make new scan req versioning flow")
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://msgid.link/20240415114847.5e2d602b3190.I4c4931021be74a67a869384c8f8ee7463e0c7857@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If a PASN station is added, and an old PASN station already exists
for the same mac address, remove the old station before adding the
new one. Keeping the old station caueses old security context to
be used in measurements.
Fixes: 0739a7d70e ("iwlwifi: mvm: initiator: add option for adding a PASN responder")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240415114847.ef3544a416f2.I4e8c7c8ca22737f4f908ae5cd4fc0b920c703dd3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Depending on the origin of the packets (and their SA), 802.11 + mesh headers
could be filled in differently. In order to properly deal with that, add a
new field to the lookup key, indicating the type (local, proxied or
forwarded). This can fix spurious packet drop issues that depend on the order
in which nodes/hosts communicate with each other.
Fixes: d5edb9ae8d ("wifi: mac80211: mesh fast xmit support")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240415121811.13391-1-nbd@nbd.name
[use sizeof_field() for key_len]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
As the label property for LEDs is deprecated, use the color and function
properties to describe the LEDs on the device tree file for ASUS RT-AC3100
and ASUS RT-AC88U. Reorder the LED and button nodes in alphabetical order.
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20240414-for-soc-asus-rt-ac3100-improvements-v1-1-0e40caf1a70a@arinc9.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Convert a variable sized array from [1] to [].
v2: fix up a few more.
v3: integrate comments from Kees.
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Jeff Johnson <quic_jjohnson@quicinc.com> (v2)
Acked-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: keescook@chromium.org
The driver parses a union where the layout up through the first
array is the same, however, the array has different sizes
depending on the elements in the union. Be explicit to
fix the UBSAN checker.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3323
Fixes: df8fc4e934 ("kbuild: Enable -fstrict-flex-arrays=3")
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Kees Cook <keescook@chromium.org>
Support for smu ip block add for SMU v14.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
