When adding sanitization of the label, the path through
edge_detector_setup() that leads to debounce_setup() was overlooked.
A request taking this path does not allocate a new label and the
request label is freed twice when the request is released, resulting
in memory corruption.
Add label sanitization to debounce_setup().
Cc: stable@vger.kernel.org
Fixes: b34490879b ("gpio: cdev: sanitize the label before requesting the interrupt")
Signed-off-by: Kent Gibson <warthog618@gmail.com>
[Bartosz: rebased on top of the fix for empty GPIO labels]
Co-developed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This patch addresses an issue in the selftests/harness where an
assertion within FIXTURE_TEARDOWN could trigger an infinite loop.
The problem arises because the teardown procedure is meant to
execute once, but the presence of failing assertions (ASSERT_EQ(0, 1))
leads to repeated attempts to execute teardown due to
the long jump mechanism used by the harness for handling assertions.
To resolve this, the patch ensures that the teardown process
runs only once, regardless of assertion outcomes, preventing
the infinite loop and allowing tests to fail.
A simple test demo(test.c):
#include "kselftest_harness.h"
FIXTURE(f)
{
int fd;
};
FIXTURE_SETUP(f)
{
self->fd = 0;
}
FIXTURE_TEARDOWN(f)
{
TH_LOG("TEARDOWN");
ASSERT_EQ(0, 1);
self->fd = -1;
}
TEST_F(f, open_close)
{
ASSERT_NE(self->fd, 1);
}
TEST_HARNESS_MAIN
will always output the following output due to a dead loop until timeout:
# test.c:15:open_close:TEARDOWN
# test.c:16:open_close:Expected 0 (0) == 1 (1)
# test.c:15:open_close:TEARDOWN
# test.c:16:open_close:Expected 0 (0) == 1 (1)
...
But here's what we should and expect to get:
TAP version 13
1..1
# Starting 1 tests from 2 test cases.
# RUN f.open_close ...
# test.c:15:open_close:TEARDOWN
# test.c:16:open_close:Expected 0 (0) == 1 (1)
# open_close: Test terminated by assertion
# FAIL f.open_close
not ok 1 f.open_close
# FAILED: 0 / 1 tests passed.
# Totals: pass:0 fail:1 xfail:0 xpass:0 skip:0 error:0
also this is related to the issue mentioned in this patch
https://patchwork.kernel.org/project/linux-kselftest/patch/e2ba3f8c-80e6-477d-9cea-1c9af820e0ed@alu.unizg.hr/
Signed-off-by: Shengyu Li <shengyu.li.evgeny@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a fixed regulator to model the power supply to the camera connector.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20240402000424.4650-10-laurent.pinchart@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The cm4-io board comes with a PCF85063 on I2C0, connected to the GPIO44
and GPIO45 pins. Add it to the device tree.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20240402000424.4650-9-laurent.pinchart@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
BCM2711-based Raspberry Pi boards (4B, CM4 and 400) multiplex the I2C0
controller over two sets of pins, GPIO0+1 and GPIO44+45. The former is
exposed on the 40-pin header, while the latter is used for the CSI and
DSI connectors.
Add a pinctrl-based I2C bus multiplexer to bcm2711-rpi.dtsi to model
this multiplexing. The two child buses are named i2c0_0 and i2c0_1.
Note that if you modified the dts before to add devices to the i2c bus
appearing on pins gpio0 + gpio1 (either directly in the dts or using an
overlay), you have to put these into the i2c0_0 node introduced here
now.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20240402000424.4650-8-laurent.pinchart@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The Raspberry Pi firmware handles clocks on all BCM2835-derived SoCs. It
is currently defined identically in both bcm2711-rpi.dtsi and
bcm2835-rpi-common.dtsi. Move the definitions to the common
bcm2835-rpi.dtsi file.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20240402000424.4650-6-laurent.pinchart@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The firmware node contains a "dma-ranges" property to enable usage of
the DMA mapping API with its child devices, along with "#address-cells"
and "#size-cells" properties to support the dma-ranges. This was needed
due to usage of the incorrect device to perform the DMA mapping in
drivers. Now that this has been fixed, drop the properties.
This effectively reverts commits be08d278eb ("ARM: dts: bcm283x: Add
cells encoding format to firmware bus") and 55c7c06210 ("ARM: dts:
bcm283x: Fix vc4's firmware bus DMA limitations").
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20240326195807.15163-4-laurent.pinchart@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
The buffer used to transfer data over the mailbox interface is mapped
using the client's device. This is incorrect, as the device performing
the DMA transfer is the mailbox itself. Fix it by using the mailbox
controller device instead.
This requires including the mailbox_controller.h header to dereference
the mbox_chan and mbox_controller structures. The header is not meant to
be included by clients. This could be fixed by extending the client API
with a function to access the controller's device.
Fixes: 4e3d60656a ("ARM: bcm2835: Add the Raspberry Pi firmware driver")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20240326195807.15163-3-laurent.pinchart@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Unlike the other child nodes of the raspberrypi,bcm2835-firmware device,
the gpio child is documented in a legacy text-based binding in
gpio/raspberrypi,firmware-gpio.txt. This causes DT validation failures:
arch/arm64/boot/dts/broadcom/bcm2711-rpi-4-b.dtb: 'gpio' does not match any of the regexes: 'pinctrl-[0-9]+'
from schema $id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#
Convert the binding to YAML and move it to
raspberrypi,bcm2835-firmware.yaml.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Tested-by: Ivan T. Ivanov <iivanov@suse.de>
Link: https://lore.kernel.org/r/20240326195807.15163-2-laurent.pinchart@ideasonboard.com
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEN9lkrMBJgcdVAPub1V2XiooUIOQFAmYOgt8ACgkQ1V2XiooU
IOTX7RAAjhvbva/ussuSDVjDNlYkeZ96uwJNeJz/sHKm7tV043yWwQrYpOy74pBe
oxgya6IbI9yR5JVPlfrsfpgjmCbiWuiZmrMBUr0v1EQ4Zb1WD1KWnoEFKRS80hMq
qZfqCP6gWH6e7nxkD9URamBUOBemN6rg6gqDPIs9khtm9dKrUCKms8kalTlN2gKl
x1jnQwwKUZPtWXw5gN875BHrmX+kBm0YPGr11ys5mYvtUpmvSAwE1l33BAUKLzR+
vkd54f5zF+ZuURE2yYAsa4ZQh/Muho9OVv69r3rJM4thsJmvZLgPYqLZ7iEgxsBQ
RnG034d9liDeNYvsAhZSVTtzT8M8ctfSH/omyAF6QtPN6RdDd5A0XWp6/EhnuAeq
G1qKlXULwfG82uwD6hui0OBRJUTB4muFF4T28iDlCvUbFaEqftU6C/eSjcBbzJNc
nfD7AZsmXJFbEfqamHmezrKcCoCcdkXJlw0SoUp8YgO0mn9txJ3f2hTDsh/48ibA
Y5v6YXwQxP/UYugW8pFTsircaf3uasMJpk49/OlTuGXGj+NtHS0yiaw1kgpVsvPC
mzc/k9iHwan+lCAXQVHPZPwY0puIXIzgcBpJxfzcsJOQVi6SQIAjjRANpqFoGYcz
P2VGeBj1/+Xvhi62OFmvNNDw6iG4LUae4LEVj6gJuzPVqsvZ4qY=
=PKX1
-----END PGP SIGNATURE-----
Merge tag 'nf-24-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
Patch #1 unlike early commit path stage which triggers a call to abort,
an explicit release of the batch is required on abort, otherwise
mutex is released and commit_list remains in place.
Patch #2 release mutex after nft_gc_seq_end() in commit path, otherwise
async GC worker could collect expired objects.
Patch #3 flush pending destroy work in module removal path, otherwise UaF
is possible.
Patch #4 and #6 restrict the table dormant flag with basechain updates
to fix state inconsistency in the hook registration.
Patch #5 adds missing RCU read side lock to flowtable type to avoid races
with module removal.
* tag 'nf-24-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: discard table flag update with pending basechain deletion
netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
netfilter: nf_tables: reject new basechain after table flag update
netfilter: nf_tables: flush pending destroy work before exit_net release
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
netfilter: nf_tables: release batch on table validation from abort path
====================
Link: https://lore.kernel.org/r/20240404104334.1627-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-03 (ice, idpf)
This series contains updates to ice and idpf drivers.
Dan Carpenter initializes some pointer declarations to NULL as needed for
resource cleanup on ice driver.
Petr Oros corrects assignment of VLAN operators to fix Rx VLAN filtering
in legacy mode for ice.
Joshua calls eth_type_trans() on unknown packets to prevent possible
kernel panic on idpf.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
idpf: fix kernel panic on unknown packet types
ice: fix enabling RX VLAN filtering
ice: Fix freeing uninitialized pointers
====================
Link: https://lore.kernel.org/r/20240403201929.1945116-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the commit d2689b6a86 ("net: usb: ax88179_178a: avoid two
consecutive device resets"), reset is not executed from bind operation and
mac address is not read from the device registers or the devicetree at that
moment. Since the check to configure if the assigned mac address is random
or not for the interface, happens after the bind operation from
usbnet_probe, the interface keeps configured as random address, although the
address is correctly read and set during open operation (the only reset
now).
In order to keep only one reset for the device and to avoid the interface
always configured as random address, after reset, configure correctly the
suitable field from the driver, if the mac address is read successfully from
the device registers or the devicetree. Take into account if a locally
administered address (random) was previously stored.
cc: stable@vger.kernel.org # 6.6+
Fixes: d2689b6a86 ("net: usb: ax88179_178a: avoid two consecutive device resets")
Reported-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240403132158.344838-1-jtornosm@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While sched* events being traced and sched* events continuously happen,
"[xx] event tracing - enable/disable with subsystem level files" would
not stop as on some slower systems it seems to take forever.
Select the first 100 lines of output would be enough to judge whether
there are more than 3 types of sched events.
Fixes: 815b18ea66 ("ftracetest: Add basic event tracing test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Yuanhe Shu <xiangzao@linux.alibaba.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Per Documentation/filesystems/sysfs.rst, show() should only use
sysfs_emit() or sysfs_emit_at() when formatting the value to be returned
to user space.
Generated by:
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci
No functional change intended.
[ bp: Massage. ]
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240314084628.1322006-1-lizhijian@fujitsu.com
Pavan Chebbi says:
====================
bnxt_en: Update for net-next
This patchset contains the following updates to bnxt:
- Patch 1 supports handling Downstream Port Containment (DPC) AER
on older chipsets
- Patch 2 enables XPS by default on driver load
- Patch 3 optimizes page pool allocation for numa nodes
- Patch 4 & 5 add support for XDP metadata
- Patch 6 updates firmware interface
- Patch 7 adds a warning about limitations on certain transceivers
====================
Link: https://lore.kernel.org/r/20240402093753.331120-1-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some chips may not allow changing default speed when dual rate
transceivers modules are used. Firmware on those chips will
indicate the same to the driver.
Add a warning message when speed change is not supported
because a dual rate transceiver is detected by the NIC.
Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-8-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This updated interface supports backing store APIs to
configure host FW trace buffers, updates transceivers ID
types, updates to TrueFlow features and other changes
for the basic L2 features.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-7-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Change the last arg to xdp_prepare_buff to true from false.
- Ensure that when XDP_PASS is returned the xdp->data_meta area
is copied to the skb->data area. Account for the meta data
size on skb allocation and do a pull after to move it to the
"reserved" zone.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-6-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change bnxt_rx_xdp() to take a pointer to xdp instead of stack
variable.
This is in prepartion for the XDP metadata patch change where
the BPF program can change the value of the xdp.meta_data.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-5-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver's Page Pool allocation code looks at the node local
to the PCIe device to determine where to allocate memory.
In scenarios where the core count per NUMA node is low (< default rings)
it makes sense to exhaust page pool allocations on
Node 0 first and then moving on to allocating page pools
for the remaining rings from Node 1.
With this patch, and the following configuration on the NIC
$ ethtool -L ens1f0np0 combined 16
(core count/node = 12, first 12 rings on node#0, last 4 rings node#1)
and traffic redirected to a ring on node#1 , we see a performance
improvement of ~20%
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-4-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable XPS on default during NIC open. The choice of
Tx queue is based on the CPU executing the thread that
submits the Tx request. The pool of Tx queues will be
spread evenly across both device-attached NUMA nodes(local)
and remote NUMA nodes.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-3-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In case of DPC, after issuing the hot reset, the
kernel waits for 100ms for the device to complete
the reset. However on some older chips, the firmware
may take up to 1 second to complete the reset, only
after which the driver can restart the card.
Introduce delay of 900ms to handle this scenario on
the older chipsets.
Signed-off-by: Vikas Gupta <vikas.gupta@broadcom.com>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240402093753.331120-2-pavan.chebbi@broadcom.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rename nvme_fc_nvme_ctrl_freed to nvme_fc_free_ctrl to match the name
pattern for the callback.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
The RCU lock is only needed for the lookup loop and not for
list_ad_tail_rcu call. Thus move it down the call chain into
nvmet_fc_assoc_exists.
While at it also fix the name typo of the function.
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Unique discovery NQNs allow to differentiate between discovery
services from (typically physically separate) NVMe-oF subsystems.
This is required for establishing secured connections as otherwise
the credentials won't be unique and the integrity of the connection
cannot be guaranteed.
This patch adds a configfs attribute 'discovery_nqn' in the 'nvmet'
configfs directory to specify the unique discovery NQN.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Apparently there are nvme controllers around that report namespaces
in the namespace list which have zero capacity. Return -ENXIO instead
of -ENODEV from nvme_update_ns_info_block so we don't create a hidden
multipath node for these namespaces but entirely ignore them.
Fixes: 46e7422cda ("nvme: move common logic into nvme_update_ns_info")
Reported-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Modifying a MCA bank's MCA_CTL bits which control which error types to
be reported is done over
/sys/devices/system/machinecheck/
├── machinecheck0
│ ├── bank0
│ ├── bank1
│ ├── bank10
│ ├── bank11
...
sysfs nodes by writing the new bit mask of events to enable.
When the write is accepted, the kernel deletes all current timers and
reinits all banks.
Doing that in parallel can lead to initializing a timer which is already
armed and in the timer wheel, i.e., in use already:
ODEBUG: init active (active state 0) object: ffff888063a28000 object
type: timer_list hint: mce_timer_fn+0x0/0x240 arch/x86/kernel/cpu/mce/core.c:2642
WARNING: CPU: 0 PID: 8120 at lib/debugobjects.c:514
debug_print_object+0x1a0/0x2a0 lib/debugobjects.c:514
Fix that by grabbing the sysfs mutex as the rest of the MCA sysfs code
does.
Reported by: Yue Sun <samsun1006219@gmail.com>
Reported by: xingwei lee <xrivendell7@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/CAEkJfYNiENwQY8yV1LYJ9LjJs%2Bx_-PqMv98gKig55=2vbzffRw@mail.gmail.com
This function doesn't support partial writes so using
simple_write_to_buffer() doesn't really make sense. It's better to
just use copy_from_user().
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/a35dded2-392b-4ccb-9dbb-d782ac9b6547@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
The permissions on this debugfs file are 0444 so it can't be written to.
And writing to the file hasn't done anything since commit 6e9548cdb3
("ASoC: SOF: Convert the generic IPC flood test into SOF client").
Delete the write function.
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/9d2477cf-25aa-4d12-818f-fdafc9aaa28a@moroto.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
Subject: [PATCH] drm/panfrost: Fix the error path in
panfrost_mmu_map_fault_addr()
If some the pages or sgt allocation failed, we shouldn't release the
pages ref we got earlier, otherwise we will end up with unbalanced
get/put_pages() calls. We should instead leave everything in place
and let the BO release function deal with extra cleanup when the object
is destroyed, or let the fault handler try again next time it's called.
Fixes: 187d292920 ("drm/panfrost: Add support for GPU heap allocations")
Cc: <stable@vger.kernel.org>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Co-developed-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240105184624.508603-18-dmitry.osipenko@collabora.com
The incompatible device in my possession has a sticker that says
"F5U002 Rev 2" and "P80453-B", and lsusb identifies it as
"050d:0002 Belkin Components IEEE-1284 Controller". There is a bug
report from 2007 from Michael Trausch who was seeing the exact same
errors that I saw in 2024 trying to use this cable.
Link: https://lore.kernel.org/all/46DE5830.9060401@trausch.us/
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Link: https://lore.kernel.org/r/20240326150723.99939-5-alexhenrie24@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This device is a gray USB parallel port adapter with "F5U002" imprinted
on the plastic and a sticker that says both "F5U002" and "P80453-A".
It's identified in lsusb as "05ab:1001 In-System Design BAYI Printer
Class Support". It's subtly different from the other gray cable I have
that has "F5U002 Rev 2" and "P80453-B" on its sticker and device ID
050d:0002.
The uss720 driver appears to work flawlessly with this device, although
the device evidently does not support ECP.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Link: https://lore.kernel.org/r/20240326150723.99939-4-alexhenrie24@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This avoids a "fix this legacy no-device port driver" warning from
parport_announce_port in drivers/parport/share.c. The parport driver now
requires a pointer to the device struct.
Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Link: https://lore.kernel.org/r/20240326150723.99939-2-alexhenrie24@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Dell quirk from ucsi_acpi.c. The quirk is no longer
necessary as we no longer send lone connector change acks.
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240327224554.1772525-4-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some PPM implementation do not like UCSI_ACK_CONNECTOR_CHANGE
without UCSI_ACK_COMMAND_COMPLETE. Moreover, doing this is racy
as it requires sending two UCSI_ACK_CC_CI commands in a row and
the second one will be started with UCSI_CCI_ACK_COMPLETE already
set in CCI.
Bundle the UCSI_ACK_CONNECTOR_CHANGE with the UCSI_ACK_COMMAND_COMPLETE
for the UCSI_GET_CONNECTOR_STATUS command that is sent while
handling a connector change event.
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240327224554.1772525-3-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In ucsi.h there are flag definitions for the ->flags field
in struct ucsi. Some implementations abuse these bits for
their private ->flags fields e.g. in struct ucsi_acpi.
Move the definitions into the backend implementations that
still need them. While there fix one instance where the flag
name was not converted in a previous change.
No semantic change intended.
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240327224554.1772525-2-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now as all UCSI issues have been fixed, enable UCSI subdevice on the
Qualcomm SC8180X platform.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240329-qcom-ucsi-fixes-v2-11-0f5d37ed04db@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now as all UCSI issues have been fixed, reenable UCSI subdevice on the
Qualcomm SC8280XP platform.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240329-qcom-ucsi-fixes-v2-10-0f5d37ed04db@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In preparation to adding more quirks, extract quirks to the static
variables and reference them through match->data. Otherwise adding
more quirks will add the table really cumbersome.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240329-qcom-ucsi-fixes-v2-8-0f5d37ed04db@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Qualcomm firmware doesn't return sane information for device's PDOs
unless the partner is also using a PD mode. On SC8280XP this even
results in the Error bit being set in the UCSI response (with 0 error
status).
Add a quirk to delay reading USB PD capabilities for a device until we
detect a partner in PD mode.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240329-qcom-ucsi-fixes-v2-7-0f5d37ed04db@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extract function to read PDOs from the port and set PD capabilities
accordingly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240329-qcom-ucsi-fixes-v2-6-0f5d37ed04db@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In a way similar to the previous commit, move
typec_partner_set_usb_power_delivery() to be called after reading the PD
caps. This also removes calls to
usb_power_delivery_unregister_capabilities() from the error path. Keep
all capabilities registered until they are cleared by
ucsi_unregister_partner_pdos().
Fixes: b04e1747fb ("usb: typec: ucsi: Register USB Power Delivery Capabilities")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240329-qcom-ucsi-fixes-v2-5-0f5d37ed04db@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UCSI driver will attempt to set a USB PD device only if it was able to
read PDOs from the firmware. This results in suboptimal behaviour, since
the PD device will be created anyway. Move calls to
typec_port_set_usb_power_delivery() out of conditional code and call it
after reading capabilities.
Fixes: b04e1747fb ("usb: typec: ucsi: Register USB Power Delivery Capabilities")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240329-qcom-ucsi-fixes-v2-4-0f5d37ed04db@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use typec_partner_usb_power_delivery_register() to register PD device
for Type-C partner so that the PD device is nested under the partner's
device in sysfs.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240329-qcom-ucsi-fixes-v2-3-0f5d37ed04db@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
