Applying WA 14018575942 only on Compute engine has impact on
some apps like chrome. Updating this WA to apply on Render
engine as well as it is helping with performance on Chrome.
Note: There is no concern from media team thus not applying
WA on media engines. We will revisit if any issues reported
from media team.
V2(Matt):
- Use correct WA number
Fixes: 668f37e1ee ("drm/i915/mtl: Update workaround 14018778641")
Signed-off-by: Tejas Upadhyay <tejas.upadhyay@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228103738.2018458-1-tejas.upadhyay@intel.com
(cherry picked from commit 7127128017)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reinstate commit 88b065943c ("drm/i915/dsi: Do display on
sequence later on icl+"), for the most part. Turns out some
machines (eg. Chuwi Minibook X) really do need that updated order.
It is also the order the Windows driver uses.
However we can't just undo the revert since that would again
break Lenovo 82TQ. After staring at the VBT sequences for both
machines I've concluded that the Lenovo 82TQ sequences look
somewhat broken:
- INIT_OTP is not present at all
- what should be in INIT_OTP is found in DISPLAY_ON
- what should be in DISPLAY_ON is found in BACKLIGHT_ON
(along with the actual backlight stuff)
The Chuwi Minibook X on the other hand has a full complement
of sequences in its VBT.
So let's try to deal with the broken sequences in the
Lenovo 82TQ VBT by simply swapping the (non-existent)
INIT_OTP sequence with the DISPLAY_ON sequence. Thus we
execute DISPLAY_ON when intending to execute INIT_OTP,
and execute nothing at all when intending to execute
DISPLAY_ON. That should be 100% equivalent to the
revert, for such broken VBTs.
Cc: stable@vger.kernel.org
Fixes: 6992eb815d ("Revert "drm/i915/dsi: Do display on sequence later on icl+"")
References: https://gitlab.freedesktop.org/drm/intel/-/issues/10071
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10334
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305083659.8396-1-ville.syrjala@linux.intel.com
Acked-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 94ae4612ea)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
AuxCCS framebuffers don't work on Xe driver hence disable them
from plane capabilities until they are fixed. FlatCCS framebuffers
work and they are left enabled. CCS is left untouched for i915
driver.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/933
Signed-off-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228140225.858145-1-juhapekka.heikkila@gmail.com
(cherry picked from commit b7232a730f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Looks like I misplaced a few hunks when I moved the audio
enable/disable out from the encoder enable/disable hooks.
So we are now doing a double audio enable/disable on SDVO
and g4x+ DP. Probably harmless as doing it twice shouldn't
really change anything, but let's do it just once, as intended.
Fixes: cff742cc68 ("drm/i915: Hoist the encoder->audio_{enable,disable}() calls higher up")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226193251.29619-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 315bd0a082)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Some sai only connect one direction dma (rx/tx) in SOC. For example:
imx8qxp sai5 only connect tx dma channel. So allow only one "rx" or "tx"
for dma-names.
Remove description under dmas because no user use index to get dma channel.
All user use 'dma-names' to get correct dma channel. dma-names already in
'required' list.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://msgid.link/r/20240328-asrc_8qxp-v8-3-801cd6bb5be2@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fsl,imx8qxp-spdif and fsl,imx8qm-spdif have 2 interrupts. Other platforms
have 1 interrupt.
Increase max interrupt number to 2 and add restriction for platforms except
i.MX8QXP and i.MX8QM.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://msgid.link/r/20240328-asrc_8qxp-v8-2-801cd6bb5be2@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add power-domains property for asrc and spdif since fsl,imx8qm-asrc/spdif
and fsl,imx8qxp-asrc/spdif require 'power-domains'.
Set 'power-domains' as required property for compatible string
fsl,imx8qm-asrc/spdif and fsl,imx8qxp-asrc/spdif.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://msgid.link/r/20240328-asrc_8qxp-v8-1-801cd6bb5be2@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The driver is for amplifiers NAU8325 of Nuvoton Technology Corporation.
The NAU8325 is a stereo high efficiency filter-free Class-D audio
amplifier, which is capable of driving a 4ohm load with up to 3W output
power.
Signed-off-by: Seven Lee <wtli@nuvoton.com>
Link: https://msgid.link/r/20240327075755.3410381-3-wtli@nuvoton.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Enable multimode when a transfer of multiple small words can be
transformed in a transfer with a single bigger word. This is allowed as
long as the result on the cable is the same, so word_delay must be zero.
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://msgid.link/r/20240327-spi-omap2-mcspi-multi-mode-v3-3-c4ac329dd5a2@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce support for MULTI-mode in the OMAP2 MCSPI driver. Currently, the
driver always uses SINGLE mode to handle the chip select (CS). With this
enhancement, MULTI-mode is enabled for specific messages, allowing for a
shorter delay between CS enable and the message (some FPGA devices are
sensitive to this delay).
The OMAP2 MCSPI device can use two different mode to send messages, SINGLE
and MULTI:
In SINGLE mode, the controller only leverages one single FIFO, and the
host system has to manually select the CS it wants to enable.
In MULTI mode, each CS is bound to a FIFO, the host system then writes the
data to the relevant FIFO, as the hardware will take care of the CS
The drawback of multi-mode is that it's not possible to keep the CS
enabled between each words. Therefore, this patch enables multi-mode only
for specific messages: the spi_message must contain only spi_transfer of 1
word (of any size) with cs_change enabled.
A new member is introduced in the omap2_mcspi structure to keep track of
the current used mode.
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://msgid.link/r/20240327-spi-omap2-mcspi-multi-mode-v3-2-c4ac329dd5a2@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit 5cbc7ca987 ("spi: spi-omap2-mcspi.c: Toggle CS after each
word") introduced the toggling of CS after each word for the omap2-mcspi
controller.
The implementation is not respectful of the actual spi_message
content, so the CS can be raised after each word even if the
transfer structure asks to keep the CS active for the whole operation.
As it is not used anyway in the current Linux tree, it can be safely
removed.
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://msgid.link/r/20240327-spi-omap2-mcspi-multi-mode-v3-1-c4ac329dd5a2@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit
8117961d98 ("x86/efi: Disregard setup header of loaded image")
dropped the memcopy of the image's setup header into the boot_params
struct provided to the core kernel, on the basis that EFI boot does not
need it and should rely only on a single protocol to interface with the
boot chain. It is also a prerequisite for being able to increase the
section alignment to 4k, which is needed to enable memory protections
when running in the boot services.
So only the setup_header fields that matter to the core kernel are
populated explicitly, and everything else is ignored. One thing was
overlooked, though: the initrd_addr_max field in the setup_header is not
used by the core kernel, but it is used by the EFI stub itself when it
loads the initrd, where its default value of INT_MAX is used as the soft
limit for memory allocation.
This means that, in the old situation, the initrd was virtually always
loaded in the lower 2G of memory, but now, due to initrd_addr_max being
0x0, the initrd may end up anywhere in memory. This should not be an
issue principle, as most systems can deal with this fine. However, it
does appear to tickle some problems in older UEFI implementations, where
the memory ends up being corrupted, resulting in errors when unpacking
the initramfs.
So set the initrd_addr_max field to INT_MAX like it was before.
Fixes: 8117961d98 ("x86/efi: Disregard setup header of loaded image")
Reported-by: Radek Podgorny <radek@podgorny.cz>
Closes: https://lore.kernel.org/all/a99a831a-8ad5-4cb0-bff9-be637311f771@podgorny.cz
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Avoid a type mismatch warning in max() by switching to max_t() and
providing the type explicitly.
Fixes: 3cb4a48275 ("efi/libstub: fix efi_random_alloc() ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
I'm not sure why this check was ever here. After updating to 6.6 I
suddenly found caching had been turned on by default and neither
cache=none nor the new directio would turn it off. After walking through
the new code very manually I realized that it's because the caching has
to be, in effect, turned off explicitly by setting P9L_DIRECT and
whenever a file has a flag, in my case QTAPPEND, it doesn't get set.
Setting aside QTDIR which seems to ignore the new fid->mode entirely,
the rest of these either should be subject to the same cache rules as
every other QTFILE or perhaps very explicitly not cached in the case of
QTAUTH.
Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
This one hits both 9P2000 and .u as it appears v9fs has never translated
the O_TRUNC flag.
Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Add standalone includes for BUG_ON and BUILD_BUG_ON to avoid build failure
after linux-next include refactoring.
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240308144643.137831-1-joonas.lahtinen@linux.intel.com
(cherry picked from commit 4df6ac223c)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Garbage in plain 9P2000's perm bits is allowed through, which causes it
to be able to set (among others) the suid bit. This was presumably not
the intent since the unix extended bits are handled explicitly and
conditionally on .u.
Signed-off-by: Joakim Sindholt <opensource@zhasha.com>
Signed-off-by: Eric Van Hensbergen <ericvh@kernel.org>
Add the board config mtl_cs42l42_def to cs42l42 machine driver for all
mtl boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP0, and BT offload on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config rpl_cs42l42_def to cs42l42 machine driver for all
rpl boards using default SSP port allocation (headphone codec on SSP0,
speaker amplifiers on SSP1, and BT offload on SSP2).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common entry in enumeration table for all cs42l42 boards
with/without speaker amplifier. All other adl_cs42l42_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Introduce "adl_cs42l42_def" for adl boards which implement headphone
codec on SSP0 and speaker amplifiers on SSP1.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two common entries in enumeration table for all rt5682/rt5650
boards with/without speaker amplifier. All other mtl_rt5682_def
entries become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two common entries in enumeration table for all rt5682/rt5650
boards with/without speaker amplifier. All other rpl_rt5682_def
entries become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add two common entries in enumeration table for all rt5682/rt5650
boards with/without speaker amplifier. All other adl_rt5682_def
entries become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common entry in enumeration table for all rt5682 boards
with/without speaker amplifier. All other tgl_rt5682_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config mtl_nau8825_def to nau8825 machine driver for all
mtl boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP0, and BT offload on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common entry in enumeration table for all nau8825 boards
with/without speaker amplifier. All other rpl_nau8825_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common entry in enumeration table for all nau8825 boards
with/without speaker amplifier. All other adl_nau8825_def entries
become redundant so get removed.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add new flags to tplg_quirk_mask to detect and append codec/amplifier
tplg suffix to topology file name at runtime. With this feature we
could implement an enumeration entry for all boards which implement
same headphone codec regardless the speaker amplifier type.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add helper functions to get tplg suffix string for specific headphone
codec or speaker amplifier. The string could be used to compose the
default topology file name for specific headphone codec and speaker
amplifier combination.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Moving all code to snd-soc-acpi-intel-match module and remove the
snd-soc-acpi-intel-ssp-common module.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As we applied new naming convention to functions and structures,
changing module name as well to reflect the new naming.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
As we moved ssp-common files to new locations with new names, changing
the naming convention from sof_ssp_ to snd_soc_acpi_intel_.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Moving ssp-common header file from sound/soc/intel/common directory to
include/sound directory and rename the file. Keep file content
unchanged for tracking purpose.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Moving ssp-common source and header files from sound/soc/intel/boards
directory to sound/soc/intel/common directory and rename the source
file. Keep file content unchanged for tracking purpose.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327162408.63953-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-18-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-17-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-16-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-15-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-14-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-13-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Core in sdw_register_driver() already sets the .owner, so driver does
not need to.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240327-module-owner-var-v1-12-86d5002ba6dc@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
