Commit graph

1,294,546 commits

Author SHA1 Message Date
Johannes Berg
85977fc0aa wifi: mac80211: remove TDLS peers only on affected link
If a link does CSA, or if it changes SMPS mode, we need to
drop the TDLS peers, but we really should drop them only on
the affected link. Fix that.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://msgid.link/20240228095719.00d1d793f5b8.Ia9971316c6b3922dd371d64ac2198f91ed5ad9d2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:34:03 +01:00
Johannes Berg
f3dee30c67 wifi: mac80211: mlme: unify CSA handling
Unify all the CSA handling, including handling of a beacon
after the CSA, into ieee80211_sta_process_chanswitch().

The CRC of the beacon will change due to changes in the
CSA/ECSA elements, so there's really no need to have the
'beacon after CSA' handling before the CRC processing or
to change the beacon_crc_valid value here.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228095719.e269c0e02905.I9dc68ff1e84d51349822bc7d3b33b578fcf8e360@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:34:01 +01:00
Johannes Berg
6f0107d195 wifi: mac80211: introduce a feature flag for quiet in CSA
When doing CSA in multi-link, there really isn't a need to
stop transmissions entirely. Add a feature flag for drivers
to indicate they can handle quiet in CSA (be it by parsing
themselves, or by implementing drv_pre_channel_switch()),
to make that possible.

Also clean up the csa_block_tx handling: it clearly cannot
handle multi-link due to the way queues are stopped, move
it to the sdata. Drivers should be doing it themselves for
working properly during CSA in MLO anyway. Also rename it
to indicate that it reflects TX was blocked at mac80211.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228095719.258439191541.I2469d206e2bf5cb244cfde2b4bbc2ae6d1cd3dd9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:33:58 +01:00
Johannes Berg
5ecd5d82b1 wifi: mac80211: pass link conf to abort_channel_switch
Pass the link conf to the abort_channel_switch driver
method so the driver can handle things correctly.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228095718.27f621106ddd.Iadd3d69b722ffe5934779a32a0e4e596a4e33ed4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:33:56 +01:00
Johannes Berg
e6ee3a3713 wifi: mac80211: pass link_id to channel switch ops
For CSA to work correctly in multi-link scenarios, pass
the link_id to the relevant callbacks.

While at it, unify/deduplicate the tracing for them.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://msgid.link/20240228095718.b7726635c054.I0be5d00af4acb48cfbd23a9dbf067f9aeb66469d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:33:54 +01:00
Chen Shen
25703adf45 libbpf: Correct debug message in btf__load_vmlinux_btf
In the function btf__load_vmlinux_btf, the debug message incorrectly
refers to 'path' instead of 'sysfs_btf_path'.

Signed-off-by: Chen Shen <peterchenshen@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240302062218.3587-1-peterchenshen@gmail.com
2024-03-04 14:33:51 +01:00
Johannes Berg
8ade3356b2 wifi: cfg80211: allow cfg80211_defragment_element() without output
If we just want to determine the length of the fragmented
data, we basically need the same logic, and really we want
it to be _literally_ the same logic, so it cannot be out
of sync in any way.

Allow calling cfg80211_defragment_element() without an output
buffer, where it then just returns the required output size.

Also add this to the tests, just to exercise it, using the
pre-calculated length to really do the defragmentation, which
checks that this is sufficient.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Link: https://msgid.link/20240228095718.6d6565b9e3f2.Ib441903f4b8644ba04b1c766f90580ee6f54fc66@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:33:51 +01:00
Johannes Berg
22667035e5 wifi: cfg80211: expose cfg80211_iter_rnr() to drivers
In mac80211 we'll need to look at reduced neighbor report
entries for channel switch purposes, so export the iteration
function to make that simpler.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228095718.0954809964ef.I53e95c017aa71f14e8d1057afbbc75982ddb43df@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:33:49 +01:00
Johannes Berg
5a21f0eae1 wifi: mac80211: hide element parsing internals
Rework the data structures to hide element parsing internals
from the users.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094902.19c610b529e2.Ie7ea2dcb6713911590ace6583a4748f32dc37df2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:33:03 +01:00
Johannes Berg
b413c0bd9c wifi: mac80211: remove unneeded scratch_len subtraction
We're always using "scratch + len - pos", so we don't need
to subtract here to calculate the remaining length. Remove
the unnecessary subtraction.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Link: https://msgid.link/20240228094902.44e07cfa9e63.I7a9758fb9bc6b726aac49804f2f05cd521bc4128@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:33:01 +01:00
Johannes Berg
4d70e9c548 wifi: mac80211: defragment reconfiguration MLE when parsing
Using the scratch buffer (without advancing it) here in the
mlme.c code seems somewhat wrong, defragment the reconfig
multi-link element already when parsing. This might be a bit
more work in certain cases, but makes the whole thing more
regular.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094902.92936a3ce216.I4b736ce4fdc199fa1d6b00d00032f448c873a8b4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:32:59 +01:00
Johannes Berg
508c423d94 wifi: mac80211: simplify multi-link element parsing
We shouldn't assign elems->ml_basic{,len} before defragmentation,
and we don't need elems->ml_reconf{,len} at all since we don't do
defragmentation. Clean that up a bit. This does require always
defragmention even when it may not be needed, but that's easier
to reason about.

Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094902.e0115da4d2a6.I89a80f7387eabef8df3955485d4a583ed024c5b1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:32:57 +01:00
Aurélien Jacobs
46809c5156 USB: serial: option: add MeiG Smart SLM320 product
Update the USB serial option driver to support MeiG Smart SLM320.

ID 2dee:4d41 UNISOC UNISOC-8910

T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2dee ProdID=4d41 Rev=00.00
S: Manufacturer=UNISOC
S: Product=UNISOC-8910
C: #Ifs= 8 Cfg#= 1 Atr=e0 MxPwr=400mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Tested successfully a PPP LTE connection using If#= 0.
Not sure of the purpose of every other serial interfaces.

Signed-off-by: Aurélien Jacobs <aurel@gnuage.org>
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
2024-03-04 14:32:55 +01:00
Johannes Berg
2015d2d639 wifi: mac80211: remove unnecessary ML element checks
Given the prior changes to ieee80211_mle_size_ok(), we
can now pass NULL to for_each_mle_subelement(), so no
longer need to check for that here explicitly.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094901.9e32c4b63875.Ia2ee0aafdc8a48bd21b485cc36a9866f950d781b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:32:55 +01:00
Johannes Berg
68f6c6afbc wifi: mac80211: add ieee80211_vif_link_active() helper
We sometimes need to check if a link is active, and this
is complicated by the fact that active_links has no bits
set when the vif isn't (acting as) an MLD. Add a small
new helper ieee80211_vif_link_active() to make that a bit
easier, and use it in a few places.

Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094901.688760aff5f7.I06892a503f5ecb9563fbd678d35d08daf7a044b0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:32:53 +01:00
Johannes Berg
0217972f96 wifi: mac80211: remove unnecessary ML element type check
At this point, since it's taken from elems->ml_basic which
is stored only if it's of type basic, we don't really need
to check again if it's basic.

Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094901.ad1d4a09a6eb.Ib96fa75b1a6db21dd4182dcfa11fe9aff78fa3ed@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:32:49 +01:00
Jiapeng Chong
fdf0df8c93 bus: bt1-apb: Remove duplicate include
./drivers/bus/bt1-apb.c: linux/clk.h is included more than once.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8312
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-03-04 14:32:46 +01:00
Johannes Berg
6810ee918d wifi: mac80211: update scratch_pos after defrag
The scratch_pos update here was lost after defrag, so any
other uses of the scratch buffer might overwrite it.

Fixes: a286de1aa3 ("wifi: mac80211: Rename multi_link")
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094901.9da35f39eeb7.I7127f2918ec4cba416fcbc35eacaea10262c1268@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:32:45 +01:00
Ilan Peer
0e3a22389d wifi: mac80211: Adjust CQM handling for MLO
The CQM handling did not consider the MLO case and thus notified
a not-existing link with the CQM change. To fix this, propagate
the CQM notification to all the active links (handling both the
non-MLO and MLO cases).

TODO: this currently propagates the same configuration to all
links regardless of the band. This might not be the correct
approach as different links might need to be configured with
different values.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094753.bf6a3fefe553.Id738810b73e1087e01d5885508b70a3631707627@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:31:50 +01:00
Ilan Peer
ddf82e752f wifi: mac80211: Allow beacons to update BSS table regardless of scan
When a beacon is received use it to update the BSS table regardless
of the scanning state. Do so only when there are active non-monitor
interfaces. Also, while at it, in any case accept beacons only with
broadcast address.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Link: https://msgid.link/20240228094742.e508605f495b.I3ab24ab3543319e31165111b28bcdcc622b5cf02@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:31:40 +01:00
Shaul Triebitz
04577bfa99 wifi: mac80211: add link id to ieee80211_gtk_rekey_add()
In MLO, we need the link id in the GTK key to be given by
the driver after rekeying in wowlan, so add that.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094500.ce1bfc83a680.I43a6f8ab2804ee07116a37d5b9ec601b843464b1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:31:28 +01:00
Johannes Berg
b2edc72171 wifi: cfg80211: print flags in tracing in hex
It's confusing to see decimal, e.g. 20, here. Printing
the flags in hex (0x14 == 20) is much clearer.

Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094254.5f7f4ab2e137.Id5e665104bbc51377b4591289e32f8c1d4711dce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:31:14 +01:00
Dave Thaler
0ef05e258b bpf, docs: Rename legacy conformance group to packet
There could be other legacy conformance groups in the future,
so use a more descriptive name.  The status of the conformance
group in the IANA registry is what designates it as legacy,
not the name of the group.

Signed-off-by: Dave Thaler <dthaler1968@gmail.com>
Link: https://lore.kernel.org/r/20240302012229.16452-1-dthaler1968@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2024-03-04 14:31:06 +01:00
Johannes Berg
7d8b02592d wifi: mac80211: obtain AP HT/VHT data for assoc request
In the association request, we make some parameters depend on the
AP's HT/VHT information. This was broken by my code because it no
longer filled that information, making it all zero.

For HT that meant we wouldn't reduce our capabilities to 20 MHz if
needed, and for VHT we lost beamforming capabilities.

Fix this. It seems like it may even have been broken for all but
the assoc link before.

Fixes: 310c8387c6 ("wifi: mac80211: clean up connection process")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094207.7dc812c2060a.Ibd591f9c214b4e166cf7171db3cf63bda8e3c9fd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:31:03 +01:00
Johannes Berg
bf7bc8c597 wifi: mac80211: don't add VHT capa on links without them
When a link doesn't have VHT capability, before the rework
we'd have set IEEE80211_CONN_DISABLE_VHT, but now with the
linear progression of 'mode', we no longer have that. Add
an explicit check for VHT being supported, so we don't add
a zeroed VHT capabilities element where it shouldn't be.

Fixes: 310c8387c6 ("wifi: mac80211: clean up connection process")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228094207.bfe4283bcde7.Ib70a558bc6bdbcec3d9e663079229dfcc2493682@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:31:02 +01:00
Aditya Kumar Singh
5fcc7c51f9 wifi: mac80211: handle netif carrier up/down with link AP during MLO
Currently whenever link AP is started, netif_carrier_up() function is
called and whenever it is brought down, netif_carrier_down() function is
called. However, with MLO, all the links of the same MLD would use the
same netdev. Hence there is no need to indicate for each link up/down.
Also, calling it down when only one of the links went down is not
desirable.

Add changes to call the netif_carrier_up() function only when first link
is brought up. Similarly, add changes to call the netif_carrier_down()
function only when last link is brought down.

In order to check the number of beaconing links in the given interface,
introduce a new helper function ieee80211_num_beaconing_links().

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240227042251.1511122-3-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:28:59 +01:00
Rameshkumar Sundaram
1c0d21c4b3 wifi: mac80211: remove only link keys during stopping link AP
Currently while stopping a link AP, all keys from the interface were
removed. However with MLO there is a requirement to free only the link
keys.

Add changes to remove keys which are associated with the link AP which is
going to be stopped.

Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240227042251.1511122-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:28:59 +01:00
Johannes Berg
9ad7974856 wifi: cfg80211: check A-MSDU format more carefully
If it looks like there's another subframe in the A-MSDU
but the header isn't fully there, we can end up reading
data out of bounds, only to discard later. Make this a
bit more careful and check if the subframe header can
even be present.

Reported-by: syzbot+d050d437fe47d479d210@syzkaller.appspotmail.com
Link: https://msgid.link/20240226203405.a731e2c95e38.I82ce7d8c0cc8970ce29d0a39fdc07f1ffc425be4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:28:37 +01:00
Ricardo B. Marliere
eb52034436 i2c: constify the struct device_type usage
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
i2c_adapter_type and i2c_client_type variables to be constant structures as
well, placing it into read-only memory which can not be modified at
runtime.

Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2024-03-04 14:28:25 +01:00
Takashi Iwai
4223675d2b wifi: iwlwifi: Add missing MODULE_FIRMWARE() for *.pnvm
A few models require *.pnvm files while we don't declare them via
MODULE_FIRMWARE().  This resulted in the breakage of WiFi on the
system that relies on the information from modinfo (e.g. openSUSE
installer image).

This patch adds those missing MODULE_FIRMWARE() entries for *.pnvm
files.

type=feature
ticket=none

Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1207553
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/20240228163837.4320-1-tiwai@suse.de
[move to appropriate files]
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:28:01 +01:00
Lukas Bulwahn
78a0eda0ef MAINTAINERS: remove entry to non-existing file in MOBILEYE MIPS SOCS
Commit f34158edd2 ("MAINTAINERS: Add entry for Mobileye MIPS SoCs") adds
the section MOBILEYE MIPS SOCS with a file entry to the non-existing file
include/dt-bindings/soc/mobileye,eyeq5.h.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Possibly, this file was part of an early patch series, but in the final
patch series, this file does not appear anymore.

Delete this file entry in the MOBILEYE MIPS SOCS section.

Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2024-03-04 14:27:38 +01:00
Johannes Berg
a8bca3e937 wifi: mac80211: track capability/opmode NSS separately
We're currently tracking rx_nss for each station, and that
is meant to be initialized to the capability NSS and later
reduced by the operating mode notification NSS.

However, we're mixing up capabilities and operating mode
NSS in the same variable. This forces us to recalculate
the NSS capability on operating mode notification RX,
which is a bit strange; due to the previous fix I had to
never keep rx_nss as zero, it also means that the capa is
never taken into account properly.

Fix all this by storing the capability value, that can be
recalculated unconditionally whenever needed, and storing
the operating mode notification NSS separately, taking it
into account when assigning the final rx_nss value.

Cc: stable@vger.kernel.org
Fixes: dd6c064cfc ("wifi: mac80211: set station RX-NSS on reconfig")
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240228120157.0e1c41924d1d.I0acaa234e0267227b7e3ef81a59117c8792116bc@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:25:27 +01:00
Johannes Berg
b73229331e wifi: mac80211: fix supported rate masking in scan
We have an nl80211 attribute to mask supported rates from
probe responses in scanning, e.g. for use in P2P, but in
the refactoring I stopped applying this mask. Restore it.

Fixes: 07095d1677 ("wifi: mac80211: start building elements in SKBs")
Link: https://msgid.link/20240301175451.7ad8ab0bd90c.I46b49e4fc27fe60b75d4559c01104e55ed381c37@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:24:27 +01:00
Johannes Berg
2a705bc314 wifi: mac80211: check link exists before use
If the assoc link doesn't exist yet at this point, we
cannot use it yet. This isn't normally the case, but
e.g. in case of FT-DS (or just broken userspace) the
link might not be set up yet and will only be created
later in this function. Check that the link exists.

Fixes: 310c8387c6 ("wifi: mac80211: clean up connection process")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/3151f5d0-c18f-413d-b34b-b94f095b947c@moroto.mountain
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240301193633.c886d300e90a.Ie1d5e23b2a033d934d343c37249f6f4dfddcc5fe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:24:15 +01:00
Johannes Berg
01ad6b7be1 wifi: mac80211: always initialize match_auth
My previous patch only initialized match_auth when the
ifmgd->auth_data exists, but that was wrong, it should
always be set. Fix that.

Fixes: 310c8387c6 ("wifi: mac80211: clean up connection process")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/3151f5d0-c18f-413d-b34b-b94f095b947c@moroto.mountain
Reviewed-by: Miriam Rachel Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240301193633.1a3fc370f211.I979dd222b3b5eb5e1437886e5f7c2355eeccb9f7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-03-04 14:24:12 +01:00
David S. Miller
09fcde5477 Merge branch 'mptcp-userspace-pm'
Matthieu Baerts says:

====================
mptcp: userspace pm: 'dump addrs' and 'get addr'

This series from Geliang adds two new Netlink commands to the userspace
PM:

- one to dump all addresses of a specific MPTCP connection:
  - feature added in patches 3 to 5
  - test added in patches 7, 8 and 10

- and one to get a specific address for an MPTCP connection:
  - feature added in patches 11 to 13
  - test added in patches 14 and 15

These new Netlink commands can be useful if an MPTCP daemon lost track
of the different connections, e.g. after having been restarted.

The other patches are some clean-ups and small improvements added
while working on the new features.

====================

Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
2024-03-04 13:07:46 +00:00
Geliang Tang
4cc5cc7ca0 selftests: mptcp: userspace pm get addr tests
This patch adds a new helper userspace_pm_get_addr() in mptcp_join.sh.
In it, parse the token value from the output of 'pm_nl_ctl events', then
pass it to pm_nl_ctl get_addr command. Use this helper in userspace pm
dump tests.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:46 +00:00
Geliang Tang
b055671b39 selftests: mptcp: add token for get_addr
The command get_addr() of pm_nl_ctl can be used like this in in-kernel PM:

	pm_nl_ctl get $id

This patch adds token argument for it to support userspace PM:

	pm_nl_ctl get $id token $token

If 'token $token' is passed to get_addr(), copy it into the kernel netlink.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:46 +00:00
Geliang Tang
564ae6794e mptcp: get addr in userspace pm list
This patch renames mptcp_pm_nl_get_addr_doit() as a dedicated in-kernel
netlink PM get addr function mptcp_pm_nl_get_addr(). and invoke a new
wrapper mptcp_pm_get_addr() in mptcp_pm_nl_get_addr_doit.

If a token is gotten in the wrapper, that means a userspace PM is used.
So invoke mptcp_userspace_pm_get_addr() to get addr in userspace PM list.
Otherwise, invoke mptcp_pm_nl_get_addr().

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:46 +00:00
Geliang Tang
d32c8fb1c8 mptcp: implement mptcp_userspace_pm_get_addr
This patch implements mptcp_userspace_pm_get_addr() to get an address
from userspace pm address list according the given 'token' and 'id'.
Use nla_get_u32() to get the u32 value of 'token', then pass it to
mptcp_token_get_sock() to get the msk. Pass 'msk' and 'id' to the helper
mptcp_userspace_pm_lookup_addr_by_id() to get the address entry. Put
this entry to userspace using mptcp_pm_nl_put_entry_info().

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:46 +00:00
Geliang Tang
06afe09091 mptcp: add userspace_pm_lookup_addr_by_id helper
Corresponding __lookup_addr_by_id() helper in the in-kernel netlink PM,
this patch adds a new helper mptcp_userspace_pm_lookup_addr_by_id() to
lookup the address entry with the given id on the userspace pm local
address list.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:46 +00:00
Geliang Tang
38f027fca1 selftests: mptcp: dump userspace addrs list
This patch adds a new helper userspace_pm_dump() to dump addresses
for the userspace PM. Use this helper to check whether an ID 0 subflow
is listed in the output of dump command after creating an ID 0 subflow
in "userspace pm create id 0 subflow" test. Dump userspace PM addresses
list in "userspace pm add & remove address" test and in "userspace pm
create destroy subflow" test.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:46 +00:00
Geliang Tang
2d0c1d27ea selftests: mptcp: add mptcp_lib_check_output helper
Extract the main part of check() in pm_netlink.sh into a new helper
named mptcp_lib_check_output in mptcp_lib.sh.

This helper will be used for userspace dump addresses tests.

Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:46 +00:00
Geliang Tang
950c332125 selftests: mptcp: add token for dump_addr
The command dump_addr() of pm_nl_ctl can be used like this in in-kernel PM:

        pm_nl_ctl dump

This patch adds token argument for it to support userspace PM:

        pm_nl_ctl dump token $token

If 'token $token' is passed to dump_addr(), copy it into the kernel
netlink.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:46 +00:00
Geliang Tang
9963b77e25 selftests: mptcp: add userspace pm subflow flag
This patch adds the address flag MPTCP_PM_ADDR_FLAG_SUBFLOW in csf() in
pm_nl_ctl.c when subflow is created by a userspace PM.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:45 +00:00
Geliang Tang
c19ee3c7e3 mptcp: check userspace pm flags
Just like MPTCP_PM_ADDR_FLAG_SIGNAL flag is checked in userspace PM
announce mptcp_pm_nl_announce_doit(), PM flags should be checked in
mptcp_pm_nl_subflow_create_doit() too.

If MPTCP_PM_ADDR_FLAG_SUBFLOW flag is not set, there's no flags field
in the output of dump_addr. This looks a bit strange:

        id 10 flags  10.0.3.2

This patch uses mptcp_pm_parse_entry() instead of mptcp_pm_parse_addr()
to get the PM flags of the entry and check it. MPTCP_PM_ADDR_FLAG_SIGNAL
flag shouldn't be set here, and if MPTCP_PM_ADDR_FLAG_SUBFLOW flag is
missing from the netlink attribute, always set this flag.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:45 +00:00
Geliang Tang
9ae7846c4b mptcp: dump addrs in userspace pm list
This patch renames mptcp_pm_nl_get_addr_dumpit() as a dedicated in-kernel
netlink PM dump addrs function mptcp_pm_nl_dump_addr(), and invoke a newly
added wrapper mptcp_pm_dump_addr() in mptcp_pm_nl_get_addr_dumpit().

Invoke in-kernel PM dump addrs function mptcp_pm_nl_dump_addr() or
userspace PM dump addrs function mptcp_userspace_pm_dump_addr() based on
whether the token parameter is passed in or not in the wrapper.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:45 +00:00
Geliang Tang
9e6c88e2f0 mptcp: add token for get-addr in yaml
This patch adds token parameter together with addr in get-addr section in
mptcp_pm.yaml, then use the following commands to update mptcp_pm_gen.c
and mptcp_pm_gen.h:

./tools/net/ynl/ynl-gen-c.py --mode kernel \
        --spec Documentation/netlink/specs/mptcp_pm.yaml --source \
        -o net/mptcp/mptcp_pm_gen.c
./tools/net/ynl/ynl-gen-c.py --mode kernel \
        --spec Documentation/netlink/specs/mptcp_pm.yaml --header \
        -o net/mptcp/mptcp_pm_gen.h

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:45 +00:00
Geliang Tang
34e74a5cf3 mptcp: implement mptcp_userspace_pm_dump_addr
This patch implements mptcp_userspace_pm_dump_addr() to dump addresses
from userspace pm address list. Use mptcp_token_get_sock() to get the
msk from the given token, if userspace PM is enabled in it, traverse
each address entry in address list, put every entry to userspace using
mptcp_pm_nl_put_entry_msg().

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:45 +00:00
Geliang Tang
34ca91e15e mptcp: export mptcp_genl_family & mptcp_nl_fill_addr
This patch exports struct mptcp_genl_family and mptcp_nl_fill_addr() helper
to allow them can be used in pm_userspace.c.

Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-03-04 13:07:45 +00:00