Commit graph

1,294,546 commits

Author SHA1 Message Date
Biju Das
1d2da79708 pinctrl: renesas: rzg2l: Avoid configuring ISEL in gpio_irq_{en,dis}able*(
Currently on irq_disable(), we are disabling gpio interrupt enable(ISEL).
That means the pin is just gpio input and not gpio input interrupt any
more.  So, move configuring ISEL in rzg2l_gpio_child_to_parent_hwirq()/
rzg2l_gpio_irq_domain_free() so that the pin will be gpioint always even
during irq_disable().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240206135318.165426-1-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-21 16:34:05 +01:00
Biju Das
d3c4929933 pinctrl: renesas: rzg2l: Simplify rzg2l_gpio_irq_{en,dis}able()
Simplify rzg2l_gpio_irq_{en,dis}able() by adding a helper function
rzg2l_gpio_irq_endisable().

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240206135115.151218-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-21 16:33:55 +01:00
Bart Van Assche
b820de741a
fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio
If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the
following kernel warning appears:

WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8
Call trace:
 kiocb_set_cancel_fn+0x9c/0xa8
 ffs_epfile_read_iter+0x144/0x1d0
 io_read+0x19c/0x498
 io_issue_sqe+0x118/0x27c
 io_submit_sqes+0x25c/0x5fc
 __arm64_sys_io_uring_enter+0x104/0xab0
 invoke_syscall+0x58/0x11c
 el0_svc_common+0xb4/0xf4
 do_el0_svc+0x2c/0xb0
 el0_svc+0x2c/0xa4
 el0t_64_sync_handler+0x68/0xb4
 el0t_64_sync+0x1a4/0x1a8

Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is
submitted by libaio.

Suggested-by: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Avi Kivity <avi@scylladb.com>
Cc: Sandeep Dhavale <dhavale@google.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: stable@vger.kernel.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-02-21 16:31:49 +01:00
Mads Bligaard Nielsen
aeedaee5ef
drm/bridge: adv7511: fix crash on irq during probe
Moved IRQ registration down to end of adv7511_probe().

If an IRQ already is pending during adv7511_probe
(before adv7511_cec_init) then cec_received_msg_ts
could crash using uninitialized data:

    Unable to handle kernel read from unreadable memory at virtual address 00000000000003d5
    Internal error: Oops: 96000004 [#1] PREEMPT_RT SMP
    Call trace:
     cec_received_msg_ts+0x48/0x990 [cec]
     adv7511_cec_irq_process+0x1cc/0x308 [adv7511]
     adv7511_irq_process+0xd8/0x120 [adv7511]
     adv7511_irq_handler+0x1c/0x30 [adv7511]
     irq_thread_fn+0x30/0xa0
     irq_thread+0x14c/0x238
     kthread+0x190/0x1a8

Fixes: 3b1b975003 ("drm: adv7511/33: add HDMI CEC support")
Signed-off-by: Mads Bligaard Nielsen <bli@bang-olufsen.dk>
Signed-off-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240219-adv7511-cec-irq-crash-fix-v2-1-245e53c4b96f@bang-olufsen.dk
2024-02-21 16:29:58 +01:00
Biju Das
2fd4fe19d0 pinctrl: renesas: rzg2l: Configure interrupt input mode
Configure GPIO interrupt as input mode. Also if the bootloader sets
gpio interrupt pin as function, override it as gpio.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240206135115.151218-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2024-02-21 16:22:17 +01:00
Chengming Zhou
c94d222445 mm, slab: fix the comment of cpu partial list
The partial slabs on cpu partial list are not frozen after the commit
8cd3fa428b ("slub: Delay freezing of partial slabs") merged. So fix
the comment.

Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2024-02-21 16:20:53 +01:00
Chengming Zhou
303cd69394 mm, slab: remove unused object_size parameter in kmem_cache_flags()
We don't use the object_size parameter in kmem_cache_flags(), so just
remove it.

Signed-off-by: Chengming Zhou <chengming.zhou@linux.dev>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2024-02-21 16:20:11 +01:00
Christoph Hellwig
a3911966bd block: fix virt_boundary handling in blk_validate_limits
Don't set the default max_segment_size value when a virt_boundary is
used.

Fixes: d690cb8ae1 ("block: add an API to atomically update queue limits")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240221125010.3609444-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-02-21 07:21:28 -07:00
Johannes Berg
81830c8f80 wifi: nl80211: refactor parsing CSA offsets
The CSA offset parsing happens the same way for all of
beacon template offsets, probe response template offsets
and TX offsets (for using during probe response TX from
userspace directly).

Refactor the parsing here. There's an additional check
this introduces, which is that the number of counters in
TX offsets doesn't exceed the driver capability, but as
only two counters are used at most for anything, this is
hopefully OK.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:05 +01:00
Alexis Lothoré
4f4d8be6dc wifi: nl80211: force WLAN_AKM_SUITE_SAE in big endian in NL80211_CMD_EXTERNAL_AUTH
User-space supplicant (observed at least on wpa_supplicant) historically
parses the NL80211_ATTR_AKM_SUITES from the NL80211_CMD_EXTERNAL_AUTH
message as big endian _only_ when its value is WLAN_AKM_SUITE_SAE, while
processing anything else in host endian. This behavior makes any driver
relying on SAE external auth to switch AKM suite to big endian if it is
WLAN_AKM_SUITE_SAE. A fix bringing compatibility with both endianness
has been brought into wpa_supplicant, however we must keep compatibility
with older versions, while trying to reduce the occurences of this manual
conversion in wireless drivers.

Add the be32 conversion specifically on WLAN_AKM_SUITE_SAE in nl80211 layer
to keep compatibility with older wpa_supplicant versions.

Suggested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Link: https://msgid.link/20240215-nl80211_fix_akm_suites_endianness-v1-1-57e902632f9d@bootlin.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:05 +01:00
Mukesh Sisodiya
32a1bbd3fe wifi: iwlwifi: load b0 version of ucode for HR1/HR2
load b0 version of ucode for both a0 and b0 step of HR RF.

Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.0166f5d2d5d2.I34c1d46aefd70b34c1c75cea67792bc5ec8bc285@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:05 +01:00
Miri Korenblit
740dfecc33 wifi: iwlwifi: handle per-phy statistics from fw
In the operational statistics notifications (both old and new
API) the driver receives the statistics per phy.
currently this statistics wasn't handled because they wasn't needed.

Now the channel_load_by_us parameter in these statistics will be used
for the link grading calculation (implemented in another patch),
so store its value in phy_ctxt.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://msgid.link/20240218194912.e84f975b69ee.Ibbc7817135827e45adaaa47b796be165f9f1ca48@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:05 +01:00
Johannes Berg
ccb2f72cee wifi: iwlwifi: iwl-fh.h: fix kernel-doc issues
Clean up kernel-doc in iwl-fh.h. In one case, rename the
(otherwise unused) struct member to have the correct name.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.4a342ac06f0b.I604ea964a094b43df0ab29b06231c2f42d6bd79b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:05 +01:00
Johannes Berg
f63280ab7a wifi: iwlwifi: api: fix kernel-doc reference
This is for iwl_tas_config_cmd_v4, not iwl_tas_config_cmd_v3.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.5475d49bce86.I640a12bc799612e82c3e7a4d628bbb7760511297@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:05 +01:00
Benjamin Berg
e2967e8392 wifi: iwlwifi: mvm: unlock mvm if there is no primary link
At that point in the code mvm->mutex has already been taken, so jump to
out_noreset in order to unlock before returning the error.

Fixes: 8c9bef26e9 ("wifi: iwlwifi: mvm: d3: implement suspend with MLO")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.21de6e68d9e5.I3c0ebe577dec6b26ab6b4eac48035d6f35a8b0f8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:04 +01:00
Miri Korenblit
653a90f6b2 wifi: iwlwifi: bump FW API to 90 for BZ/SC devices
Start supporting API version 90 for new devices.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.21cf0b641f12.I2f9196191f1ea78e96e92f9db8ecb3cc9bbfd9b3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:04 +01:00
Johannes Berg
9a43c1902e wifi: iwlwifi: mvm: support PHY context version 6
Fill the new puncture mask in the PHY context command if
supported. In this case, also don't send it in the link
context command.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.16d9f5fc41df.I9eeb55787d8483f820f5790e8874761f598da314@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:04 +01:00
Johannes Berg
3eab203436 wifi: iwlwifi: mvm: partially support PHY context version 6
The version 6 command adds the puncture mask to the PHY
context and is otherwise the same. Support that in the
API definitions, but don't fill it yet.

While at it, also mark the field as removed from the link
context command since it moved from there to PHY context.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.2156fca5b1a5.I57f47f26ec0d96ecfb1192039f72b1c6d4e8a357@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:04 +01:00
Johannes Berg
32a5690e9a wifi: iwlwifi: mvm: support wider-bandwidth OFDMA
To support wider-bandwidth OFDMA we need to configure the
PHY context in the firmware, which will in turn configure
the DSP accordingly. Pass the relevant information down.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.ca666ede5dd6.I357972823d20e9045e2c97dbb7ac24fe9f5a6e41@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:04 +01:00
Johannes Berg
894dd84e49 wifi: cfg80211: use ML element parsing helpers
Use the existing ML element parsing helpers and add a new
one for this (ieee80211_mle_get_mld_id).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.4da47b1f035b.I437a5570ac456449facb0b147851ef24a1e473c2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:04 +01:00
Johannes Berg
6bd14aee0b wifi: mac80211: align ieee80211_mle_get_bss_param_ch_cnt()
Align the prototype of ieee80211_mle_get_bss_param_ch_cnt()
to also take a u8 * like the other functions, and make it
return -1 when the field isn't found, so that mac80211 can
check that instead of explicitly open-coding the check.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.583309181bc3.Ia61cb0b4fc034d5ac8fcfaf6f6fb2e115fadafe7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:04 +01:00
Johannes Berg
6b756efcd9 wifi: cfg80211: refactor RNR parsing
We'll need more parsing of the reduced neighbor report element,
and we already have two places doing pretty much the same.
Combine by refactoring the parsing into a separate function
with a callback for each item found.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.cfff14b692fc.Ibe25be88a769eab29ebb17b9d19af666df6a2227@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:04 +01:00
Johannes Berg
7e899c1d6f wifi: cfg80211: clean up cfg80211_inform_bss_frame_data()
Make cfg80211_inform_bss_frame_data() call the existing
cfg80211_inform_bss_data() after parsing the frame in the
appropriate way, so we have less code duplication. This
required introducing a new CFG80211_BSS_FTYPE_S1G_BEACON,
but that can be used by other drivers as well.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.874aed1eff5f.Ib7d88d126eec50c64763251a78cb432bb5df14df@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:04 +01:00
Johannes Berg
317bad4c3b wifi: cfg80211: remove cfg80211_inform_single_bss_frame_data()
This function pretty much does what cfg80211_inform_single_bss_data()
already does, except on a frame data. But we can call the other one,
after populating the inform_data more completely, so we don't need to
do everything twice.

This also uncovered a few bugs:
 * the 6 GHz power type checks were only done in this function, move
   (and rename from 'uhb') those;
 * the chains/chain_signal information wasn't used in the latter,
   add that

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.f3f864f94c78.I2192adb32ab10713e71f395a9d203386264f6ed5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:04 +01:00
Benjamin Berg
f8599d6340 wifi: cfg80211: set correct param change count in ML element
The ML element generation code to create a BSS entry from a per-STA
profile was not overwriting the BSS parameter change count. This meant
that the incorrect parameter change count would be reported within the
multi-link element.

Fix this by returning the BSS parameter change count from the function
and placing it into the ML element. The returned tbtt info was never
used, so just drop that to simplify the code.

Fixes: 5f478adf1f ("wifi: cfg80211: generate an ML element for per-STA profiles")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240216135047.f2a507634692.I06b122c7a319a38b4e970f5e0bd3d3ef9cac4cbe@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:03 +01:00
Andy Shevchenko
f79ab5d2bc wifi: cfg80211: Add KHZ_PER_GHZ to units.h and reuse
The KHZ_PER_GHZ might be used by others (with the name aligned
with similar constants). Define it in units.h and convert
wireless to use it.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240215154136.630029-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:03 +01:00
Colin Ian King
ba4b1fa312 wifi: mac80211: clean up assignments to pointer cache.
The assignment to pointer cache in function mesh_fast_tx_gc can
be made at the declaration time rather than a later assignment.
There are also 3 functions where pointer cache is being initialized
at declaration time and later re-assigned again with the same
value, these are redundant and can be removed.

Cleans up code and three clang scan build warnings:
warning: Value stored to 'cache' during its initialization is never
read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://msgid.link/20240215232151.2075483-1-colin.i.king@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:03 +01:00
Miri Korenblit
d73fbaf24c wifi: mac80211: make associated BSS pointer visible to the driver
Some drivers need the data in it, so move it to the link conf,
which is exposed to the driver.

Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240206164849.6fe9782b87b4.Ifbffef638f07ca7f5c2b27f40d2cf2942d21de0b@changeid
[remove bss pointer from internal struct, update docs]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:03 +01:00
Aditya Kumar Singh
7f50145236 wifi: mac80211_hwsim: add support for switch_vif_chanctx callback
Currently switch_vif_chanctx mac80211 callback is not supported for
MLO. Add it.

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240216144621.514385-3-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:03 +01:00
Aditya Kumar Singh
6030b3a469 wifi: mac80211: check beacon countdown is complete on per link basis
Currently, function to check if beacon countdown is complete uses deflink
to fetch the beacon and check the counter. However, with MLO, there is
a need to check the counter for the beacon in a particular link.

Add support to use link_id in order to fetch the beacon from a particular
link data.

Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Link: https://msgid.link/20240216144621.514385-2-quic_adisi@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 15:19:03 +01:00
Steven Rostedt (Google)
e78fb4eac8 ring-buffer: Do not let subbuf be bigger than write mask
The data on the subbuffer is measured by a write variable that also
contains status flags. The counter is just 20 bits in length. If the
subbuffer is bigger than then counter, it will fail.

Make sure that the subbuffer can not be set to greater than the counter
that keeps track of the data on the subbuffer.

Link: https://lore.kernel.org/linux-trace-kernel/20240220095112.77e9cb81@gandalf.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 2808e31ec1 ("ring-buffer: Add interface for configuring trace sub buffer size")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2024-02-21 09:15:23 -05:00
Janosch Frank
4a59932874 KVM: s390: introduce kvm_s390_fpu_(store|load)
It's a bit nicer than having multiple lines and will help if there's
another re-work since we'll only have to change one location.

Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-21 15:09:13 +01:00
Jason Gunthorpe
723a2cc8d6 s390: use the correct count for __iowrite64_copy()
The signature for __iowrite64_copy() requires the number of 64 bit
quantities, not bytes. Multiple by 8 to get to a byte length before
invoking zpci_memcpy_toio()

Fixes: 87bc359b98 ("s390/pci: speed up __iowrite64_copy by using pci store block insn")
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/0-v1-9223d11a7662+1d7785-s390_iowrite64_jgg@nvidia.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2024-02-21 15:07:46 +01:00
Pierre-Hugues Husson
d881d79f8c arm64: dts: amlogic: add fbx8am DT overlays
Add support for two variants of the fbx8am board.

Signed-off-by: Pierre-Hugues Husson <phhusson@freebox.fr>
Signed-off-by: Marc Gonzalez <mgonzalez@freebox.fr>
Link: https://lore.kernel.org/r/79ba726d-d02c-44b9-b6f6-59b17ba9755c@freebox.fr
[narmstrong: squashed https://lore.kernel.org/all/814c9035-1fda-4cd3-ab3c-95b58e2ecb22@freebox.fr/]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
2024-02-21 15:04:53 +01:00
Colin Ian King
1382d8b551
ASoC: qcom: Fix uninitialized pointer dmactl
In the case where __lpass_get_dmactl_handle is called and the driver
id dai_id is invalid the pointer dmactl is not being assigned a value,
and dmactl contains a garbage value since it has not been initialized
and so the null check may not work. Fix this to initialize dmactl to
NULL. One could argue that modern compilers will set this to zero, but
it is useful to keep this initialized as per the same way in functions
__lpass_platform_codec_intf_init and lpass_cdc_dma_daiops_hw_params.

Cleans up clang scan build warning:
sound/soc/qcom/lpass-cdc-dma.c:275:7: warning: Branch condition
evaluates to a garbage value [core.uninitialized.Branch]

Fixes: b81af585ea ("ASoC: qcom: Add lpass CPU driver for codec dma control")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://msgid.link/r/20240221134804.3475989-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-21 14:01:17 +00:00
Emmanuel Grumbach
d3433d1bb7 wifi: iwlwifi: mvm: fix the TXF mapping for BZ devices
Those devices' fifos are numbered differently.
Because of that, we were looking at the size of the VO fifo size to
determine the size of the A-MSDU which led to a lower throughput.

Note that for those devices the only user of the AC -> fifo mapping is
the size limitation of A-MSDU.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.da336ca2fa0a.I73e44d5fc474ebb6f275b9008950e59c012f33b2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 14:42:00 +01:00
Benjamin Berg
78f65fbf42 wifi: iwlwifi: mvm: ensure offloading TID queue exists
The resume code path assumes that the TX queue for the offloading TID
has been configured. At resume time it then tries to sync the write
pointer as it may have been updated by the firmware.

In the unusual event that no packets have been send on TID 0, the queue
will not have been allocated and this causes a crash. Fix this by
ensuring the queue exist at suspend time.

Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240218194912.6632e6dc7b35.Ie6e6a7488c9c7d4529f13d48f752b5439d8ac3c4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-02-21 14:40:49 +01:00
Jason Gunthorpe
7adc0c1cfa iommufd: Reject non-zero data_type if no data_len is provided
Since the current design doesn't forward the data_type to the driver to
check unless there is a data_len/uptr for a driver specific struct we
should check and ensure that data_type is 0 if data_len is 0. Otherwise
any value is permitted.

Fixes: bd529dbb66 ("iommufd: Add a nested HW pagetable object")
Link: https://lore.kernel.org/r/0-v1-9b1ea6869554+110c60-iommufd_ck_data_type_jgg@nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-02-21 09:25:02 -04:00
Linus Walleij
5ee18186a0 ARM: dts: gemini: Fix switch node names on Vitesse switches
The formally correct node names have "ethernet-*" prefix on
switch, ports and port, fix it up.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240211-gemini-dts-v1-4-6c09adeb4c2e@linaro.org
2024-02-21 14:22:53 +01:00
Linus Walleij
c4a83b1a95 ARM: dts: gemini: Map reset keys to KEY_RESTART
This maps the misc "reset", "setup" and "facory reset" keys to the
only key a standard userspace is likely to understand: KEY_RESTART.
On OpenWrt this will simply restart the system under controlled
forms.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240211-gemini-dts-v1-3-6c09adeb4c2e@linaro.org
2024-02-21 14:22:53 +01:00
Linus Walleij
a10f5c55cb ARM: dts: gemini: Fix wiligear compatible strings
These board strings were deprecated in the bindings ages ago,
switch the boards over to the real names.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240211-gemini-dts-v1-2-6c09adeb4c2e@linaro.org
2024-02-21 14:22:53 +01:00
Linus Walleij
f69d272ef7 ARM: dts: gemini: Fix switch node names in the DIR-685
The formally correct node names have "ethernet-*" prefix on
switch, ports, port and phy, fix it up.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240211-gemini-dts-v1-1-6c09adeb4c2e@linaro.org
2024-02-21 14:22:53 +01:00
Javier Martinez Canillas
ed683b9bb9 sparc: Fix undefined reference to fb_is_primary_device
Commit 55bffc8170 ("fbdev: Split frame buffer support in FB and FB_CORE
symbols") added a new FB_CORE Kconfig symbol, that can be enabled to only
have fbcon/VT and DRM fbdev emulation, but without support for any legacy
fbdev driver.

Unfortunately, it missed to change the CONFIG_FB in arch/sparc makefiles,
which leads to the following linking error in some sparc64 configurations:

   sparc64-linux-ld: drivers/video/fbdev/core/fbcon.o: in function `fbcon_fb_registered':
>> fbcon.c:(.text+0x4f60): undefined reference to `fb_is_primary_device'

Fixes: 55bffc8170 ("fbdev: Split frame buffer support in FB and FB_CORE symbols")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/r/202401290306.IV8rhJ02-lkp@intel.com/
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: <stable@vger.kernel.org> # v6.6+
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240220095428.3341195-1-javierm@redhat.com
2024-02-21 14:08:41 +01:00
Krzysztof Kozlowski
0dae534c48
ASoC: codecs: wsa884x: Allow sharing reset GPIO
On some boards with multiple WSA8840/WSA8845 speakers, the reset
(shutdown) GPIO is shared between two speakers.  Use the reset
controller framework and its "reset-gpio" driver to handle this case.
This allows bring-up and proper handling of all WSA884x speakers on
X1E80100-CRD board.

Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240129115216.96479-7-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-21 13:02:54 +00:00
Krzysztof Kozlowski
26c8a435fc
ASoC: dt-bindings: qcom,wsa8840: Add reset-gpios for shared line
On newer Qualcomm platforms, like X1E80100-CRD, the WSA884x speakers
share SD_N GPIOs between two speakers, thus a coordinated assertion is
needed.  Linux supports handling shared GPIO lines through "reset-gpios"
property, thus allow specifying either powerdown or reset GPIOs (these
are the same).

Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Sean Anderson <sean.anderson@seco.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240129115216.96479-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-21 13:02:53 +00:00
Eric Sandeen
c4e89cc674 udf: convert to new mount API
Convert the UDF filesystem to the new mount API.

UDF is slightly unique in that it always preserves prior mount
options across a remount, so that's handled by udf_init_options().

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <fcb3faf3-e2df-450c-b37a-11000c274585@redhat.com>
2024-02-21 13:55:30 +01:00
Eric Sandeen
7a8e72c16e udf: convert novrs to an option flag
There's no reason to treat novers specially, convert it
to a flag in uopt->flags like other flag options.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <b5d53492-b99a-4b3c-82c0-581df9a9e384@redhat.com>
2024-02-21 13:55:30 +01:00
David S. Miller
ca61ba3885 Merge branch 'rework-genet-mdioclocking'
Florian Fainelli says:

====================
Rework GENET MDIO controller clocking

This patch series reworks the way that we manage the GENET MDIO
controller clocks around I/O accesses. During testing with a fully
modular build where bcmgenet, mdio-bcm-unimac, and the Broadcom PHY
driver (broadcom) are all loaded as modules, with no particular care
being taken to order them to mimize deferred probing the following bus
error was obtained:

[    4.344831] printk: console [ttyS0] enabled
[    4.351102] 840d000.serial: ttyS1 at MMIO 0x840d000 (irq = 29, base_baud = 5062500) is a Broadcom BCM7271 UART
[    4.363110] 840e000.serial: ttyS2 at MMIO 0x840e000 (irq = 30, base_baud = 5062500) is a Broadcom BCM7271 UART
[    4.387392] iproc-rng200 8402000.rng: hwrng registered
[    4.398012] Consider using thermal netlink events interface
[    4.403717] brcmstb_thermal a581500.thermal: registered AVS TMON of-sensor driver
[    4.440085] bcmgenet 8f00000.ethernet: GENET 5.0 EPHY: 0x0000
[    4.482526] unimac-mdio unimac-mdio.0: Broadcom UniMAC MDIO bus
[    4.514019] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[    4.551304] SError Interrupt on CPU2, code 0x00000000bf000002 -- SError
[    4.551324] CPU: 2 PID: 8 Comm: kworker/u8:0 Not tainted 6.1.53-0.1pre-g5a26d98e908c #2
[    4.551330] Hardware name: BCM972180HB_V20 (DT)
[    4.551336] Workqueue: events_unbound deferred_probe_work_func
[    4.551363] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[    4.551368] pc : el1_abort+0x2c/0x58
[    4.551376] lr : el1_abort+0x20/0x58
[    4.551379] sp : ffffffc00a383960
[    4.551380] x29: ffffffc00a383960 x28: ffffff80029fd780 x27: 0000000000000000
[    4.551385] x26: 0000000000000000 x25: ffffff8002839005 x24: ffffffc00a1f9bd0
[    4.551390] x23: 0000000040000005 x22: ffffffc000a48084 x21: ffffffc00a3dde14
[    4.551394] x20: 0000000096000210 x19: ffffffc00a3839a0 x18: 0000000000000579
[    4.551399] x17: 0000000000000000 x16: 0000000100000000 x15: ffffffc00a3838c0
[    4.551403] x14: 000000000000000a x13: 6e69622f7273752f x12: 3a6e6962732f7273
[    4.551408] x11: 752f3a6e69622f3a x10: 6e6962732f3d4854 x9 : ffffffc0086466a8
[    4.551412] x8 : ffffff80049ee100 x7 : ffffff8003231938 x6 : 0000000000000000
[    4.551416] x5 : 0000002200000000 x4 : ffffffc00a3839a0 x3 : 0000002000000000
[    4.551420] x2 : 0000000000000025 x1 : 0000000096000210 x0 : 0000000000000000
[    4.551429] Kernel panic - not syncing: Asynchronous SError Interrupt
[    4.551432] CPU: 2 PID: 8 Comm: kworker/u8:0 Not tainted 6.1.53-0.1pre-g5a26d98e908c #2
[    4.551435] Hardware name: BCM972180HB_V20 (DT)
[    4.551437] Workqueue: events_unbound deferred_probe_work_func
[    4.551443] Call trace:
[    4.551445]  dump_backtrace+0xe4/0x124
[    4.551452]  show_stack+0x1c/0x28
[    4.551455]  dump_stack_lvl+0x60/0x78
[    4.551462]  dump_stack+0x14/0x2c
[    4.551467]  panic+0x134/0x304
[    4.551472]  nmi_panic+0x50/0x70
[    4.551480]  arm64_serror_panic+0x70/0x7c
[    4.551484]  do_serror+0x2c/0x5c
[    4.551487]  el1h_64_error_handler+0x2c/0x40
[    4.551491]  el1h_64_error+0x64/0x68
[    4.551496]  el1_abort+0x2c/0x58
[    4.551499]  el1h_64_sync_handler+0x8c/0xb4
[    4.551502]  el1h_64_sync+0x64/0x68
[    4.551505]  unimac_mdio_readl.isra.0+0x4/0xc [mdio_bcm_unimac]
[    4.551519]  __mdiobus_read+0x2c/0x88
[    4.551526]  mdiobus_read+0x40/0x60
[    4.551530]  phy_read+0x18/0x20
[    4.551534]  bcm_phy_config_intr+0x20/0x84
[    4.551537]  phy_disable_interrupts+0x2c/0x3c
[    4.551543]  phy_probe+0x80/0x1b0
[    4.551545]  really_probe+0x1b8/0x390
[    4.551550]  __driver_probe_device+0x134/0x14c
[    4.551554]  driver_probe_device+0x40/0xf8
[    4.551559]  __device_attach_driver+0x108/0x11c
[    4.551563]  bus_for_each_drv+0xa4/0xcc
[    4.551567]  __device_attach+0xdc/0x190
[    4.551571]  device_initial_probe+0x18/0x20
[    4.551575]  bus_probe_device+0x34/0x94
[    4.551579]  deferred_probe_work_func+0xd4/0xe8
[    4.551583]  process_one_work+0x1ac/0x25c
[    4.551590]  worker_thread+0x1f4/0x260
[    4.551595]  kthread+0xc0/0xd0
[    4.551600]  ret_from_fork+0x10/0x20
[    4.551608] SMP: stopping secondary CPUs
[    4.551617] Kernel Offset: disabled
[    4.551619] CPU features: 0x00000,00c00080,0000420b
[    4.551622] Memory Limit: none
[    4.833838] ---[ end Kernel panic - not syncing: Asynchronous SError Interrupt ]---

The issue here is that we managed to probe the GENET controller, the
mdio-bcm-unimac MDIO controller, but the PHY was still being held in a
probe deferral state because it depended upon a GPIO controller provider
not loaded yet. As soon as that provider is loaded however, the PHY
continues to probe, tries to disable the interrupts, and this causes a
MDIO transaction. That MDIO transaction requires I/O register accesses
within the GENET's larger block, and since its clocks are turned off,
the CPU gets a bus error signaled as a System Error.

The patch series takes the simplest approach of keeping the clocks
enabled just for the duration of the I/O accesses. This is also
beneficial to other drivers like bcmasp2 which make use of the same MDIO
controller driver.

Changes in v2:

- added missing ret assignment in the if (IS_ERR(priv->clk)) branch

- added Jacob's R-by tags

- corrected the commit ID being reverted in patch #3
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21 12:46:17 +00:00
Florian Fainelli
ba0b78371c Revert "net: bcmgenet: Ensure MDIO unregistration has clocks enabled"
This reverts commit 1b5ea7ffb7 ("net:
bcmgenet: Ensure MDIO unregistration has clocks enabled"). This is no
longer necessary now that the MDIO bus controller has a clock that it
can manage around the I/O accesses.

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21 12:46:17 +00:00
Florian Fainelli
ee2b4cf8b2 net: bcmgenet: Pass "main" clock down to the MDIO driver
GENET has historically had to create a MDIO platform device for its
controller and pass some auxiliary data to it, like a MDIO completion
callback. Now we also pass the "main" clock to allow for the MDIO bus
controller to manage that clock adequately around I/O accesses.

Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-21 12:46:17 +00:00