Aside of switching over to the new interface, record the number of
registered CPUs locally, which allows to make num_processors and
disabled_cpus confined to the topology code.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210251.830955273@linutronix.de
Use the new topology registration functions and make the early boot code
path __init. No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210251.664738831@linutronix.de
generic_processor_info() aside of being a complete misnomer is used for
both early boot registration and ACPI CPU hotplug.
While it's arguable that this can share some code, it results in code which
is hard to understand and kept around post init for no real reason.
Also the call sites do lots of manual fiddling in topology related
variables instead of having proper interfaces for the purpose which handle
the topology internals correctly.
Provide topology_register_apic(), topology_hotplug_apic() and
topology_hotunplug_apic() which have the extra magic of the call sites
incorporated and for now are wrappers around generic_processor_info().
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210251.605007456@linutronix.de
The APIC/CPU registration sits in the middle of the APIC code. In fact this
is a topology evaluation function and has nothing to do with the inner
workings of the local APIC.
Move it out into a file which reflects what this is about.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240213210251.543948812@linutronix.de
The ACPI ID for CPUs is preset with U32_MAX which is completely non
obvious. Use a proper define for it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154640.177504138@linutronix.de
Paranoia is not wrong, but having an APIC callback which is in most
implementations a complete NOOP and in one actually looking whether the
APICID of an upcoming CPU has been registered. The same APICID which was
used to bring the CPU out of wait for startup.
That's paranoia for the paranoia sake. Remove the voodoo.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154640.116510935@linutronix.de
There is absolutely no point to write the APIC ID which was read from the
local APIC earlier, back into the local APIC for the 64-bit UP case.
Remove that along with the apic callback which is solely there for this
pointless exercise.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154640.055288922@linutronix.de
physid_t is a wrapper around bitmap. Just remove the onion layer and use
bitmap functionality directly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.994904510@linutronix.de
There is no reason to have the early mptable evaluation conditionally
invoked only from the AMD numa topology code.
Make it explicit and invoke it from setup_arch() right after the
corresponding ACPI init call. Remove the pointless wrapper and invoke
x86_init::mpparse::early_parse_smp_config() directly.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.931761608@linutronix.de
Now that all platforms have the new split SMP configuration callbacks set
up, flip the switch and remove the old callback pointer and mop up the
platform code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.870883080@linutronix.de
Initialize the new callbacks in preparation for switching the core code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.808238769@linutronix.de
Provide a wrapper around the existing function and fill the new callbacks
in.
No functional change as the new callbacks are not yet operational.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.745028043@linutronix.de
Provide a wrapper around the existing function and fill the new callbacks
in.
No functional change as the new callbacks are not yet operational.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.683073662@linutronix.de
Initialize the split SMP configuration callbacks with NOOPs as MID is
strictly ACPI only.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240212154639.620189339@linutronix.de
Select x86_dtb_parse_smp_config() as SMP configuration parser in
preparation of splitting up the get_smp_config() callback.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.558085053@linutronix.de
x86_dtb_init() is a misnomer and it really should be used as a SMP
configuration parser which is selected by the platform via
x86_init::mpparse:parse_smp_config().
Rename it to x86_dtb_parse_smp_config() in preparation for that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.495992801@linutronix.de
In preparation of splitting the get_smp_config() callback, rename
default_get_smp_config() to mpparse_get_smp_config() and provide an early
and late wrapper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.433811243@linutronix.de
The early argument of x86_init::mpparse::get_smp_config() is more than
confusing. Provide two callbacks, one for each purpose.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.370491894@linutronix.de
MPTABLE is no longer the default SMP configuration mechanism. Rename it to
mpparse_find_mptable() because that's what it does.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.306287711@linutronix.de
No need to go through APIC callbacks. It's already established that this is
an ancient APIC. So just copy the present mask and use the direct physid*
functions all over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.181901887@linutronix.de
No need to go through APIC callbacks. It's already established that this is
an ancient APIC. So just copy the present mask and use the direct physid*
functions all over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.119261725@linutronix.de
There is no point for this function. The only case where this is used is
when there is no XAPIC available, which means the broadcast address is 0xF.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154639.057209154@linutronix.de
Yet another set_bit() operation wrapped in oring a mask.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154638.995080989@linutronix.de
There is no point to do that. The ATOMs have an XAPIC for which this
function is a pointless exercise.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154638.931617775@linutronix.de
Detect all possible combinations of mismatch right in the CPUID evaluation
code.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Link: https://lore.kernel.org/r/20240212154638.867699078@linutronix.de
The package shift has been already evaluated by the early CPU init.
Put the mindless copy right next to the original leaf 0xb parser.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153625.637385562@linutronix.de
The new topology CPUID parser installs already fake topology for XEN/PV,
which ends up with cpuinfo::max_cores = 1.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153625.576579177@linutronix.de
Now that the core code does not use this monstrosity anymore, it's time to
put it to rest.
The only real purpose was to read the APIC ID on UV and VSMP systems for
the actual evaluation. That's what the core code does now.
For doing the actual shift operation there is truly no APIC callback
required.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153625.516536121@linutronix.de
No more users. Stick it into the ugly code museum.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153625.395230346@linutronix.de
Now that everything is converted switch it over and remove the intermediate
operation.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153625.334185785@linutronix.de
cpuinfo::topo::x86_coreid_bits is about to be phased out. Use the core
domain size from the topology information.
Add a comment why the early MPTABLE parsing is required and decrapify the
loop which sets the APIC ID to node map.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153625.270320718@linutronix.de
Switch it over to use the consolidated topology evaluation and remove the
temporary safe guards which are not longer needed.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153625.207750409@linutronix.de
Switch it over to the new topology evaluation mechanism and remove the
random bits and pieces which are sprinkled all over the place.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153625.145745053@linutronix.de
When switching AMD over to the new topology parser then the match functions
need to look for AMD systems with the extended topology feature at the new
topo.amd_node_id member which is then holding the node id information.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153625.082979150@linutronix.de
AMD/HYGON uses various methods for topology evaluation:
- Leaf 0x80000008 and 0x8000001e based with an optional leaf 0xb,
which is the preferred variant for modern CPUs.
Leaf 0xb will be superseded by leaf 0x80000026 soon, which is just
another variant of the Intel 0x1f leaf for whatever reasons.
- Subleaf 0x80000008 and NODEID_MSR base
- Legacy fallback
That code is following the principle of random bits and pieces all over the
place which results in multiple evaluations and impenetrable code flows in
the same way as the Intel parsing did.
Provide a sane implementation by clearly separating the three variants and
bringing them in the proper preference order in one place.
This provides the parsing for both AMD and HYGON because there is no point
in having a separate HYGON parser which only differs by 3 lines of
code. Any further divergence between AMD and HYGON can be handled in
different functions, while still sharing the existing parsers.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153625.020038641@linutronix.de
AMD (ab)uses topology_die_id() to store the Node ID information and
topology_max_dies_per_pkg to store the number of nodes per package.
This collides with the proper processor die level enumeration which is
coming on AMD with CPUID 8000_0026, unless there is a correlation between
the two. There is zero documentation about that.
So provide new storage and new accessors which for now still access die_id
and topology_max_die_per_pkg(). Will be mopped up after AMD and HYGON are
converted over.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153624.956116738@linutronix.de
Intel CPUs use either topology leaf 0xb/0x1f evaluation or the legacy
SMP/HT evaluation based on CPUID leaf 0x1/0x4.
Move it over to the consolidated topology code and remove the random
topology hacks which are sprinkled into the Intel and the common code.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153624.893644349@linutronix.de
detect_extended_topology() along with it's early() variant is a classic
example for duct tape engineering:
- It evaluates an array of subleafs with a boatload of local variables
for the relevant topology levels instead of using an array to save the
enumerated information and propagate it to the right level
- It has no boundary checks for subleafs
- It prevents updating the die_id with a crude workaround instead of
checking for leaf 0xb which does not provide die information.
- It's broken vs. the number of dies evaluation as it uses:
num_processors[DIE_LEVEL] / num_processors[CORE_LEVEL]
which "works" only correctly if there is none of the intermediate
topology levels (MODULE/TILE) enumerated.
There is zero value in trying to "fix" that code as the only proper fix is
to rewrite it from scratch.
Implement a sane parser with proper code documentation, which will be used
for the consolidated topology evaluation in the next step.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153624.830571770@linutronix.de
In preparation of a complete replacement for the topology leaf 0xb/0x1f
evaluation, move __max_die_per_package into the common code.
Will be removed once everything is converted over.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153624.768188958@linutronix.de
Centaur and Zhaoxin CPUs use only the legacy SMP detection. Remove the
invocations from their 32bit path and exclude them from the 64-bit call
path.
No functional change intended.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153624.706794189@linutronix.de
The legacy topology detection via CPUID leaf 4, which provides the number
of cores in the package and CPUID leaf 1 which provides the number of
logical CPUs in case that FEATURE_HT is enabled and the CMP_LEGACY feature
is not set, is shared for Intel, Centaur and Zhaoxin CPUs.
Lift the code from common.c without the early detection hack and provide it
as common fallback mechanism.
Will be utilized in later changes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Link: https://lore.kernel.org/r/20240212153624.644448852@linutronix.de
Topology evaluation is a complete disaster and impenetrable mess. It's
scattered all over the place with some vendor implementations doing early
evaluation and some not. The most horrific part is the permanent
overwriting of smt_max_siblings and __max_die_per_package, instead of
establishing them once on the boot CPU and validating the result on the
APs.
The goals are:
- One topology evaluation entry point
- Proper sharing of pointlessly duplicated code
- Proper structuring of the evaluation logic and preferences.
- Evaluating important system wide information only once on the boot CPU
- Making the 0xb/0x1f leaf parsing less convoluted and actually fixing
the short comings of leaf 0x1f evaluation.
Start to consolidate the topology evaluation code by providing the entry
points for the early boot CPU evaluation and for the final parsing on the
boot CPU and the APs.
Move the trivial pieces into that new code:
- The initialization of cpuinfo_x86::topo
- The evaluation of CPUID leaf 1, which presets topo::initial_apicid
- topo_apicid is set to topo::initial_apicid when invoked from early
boot. When invoked for the final evaluation on the boot CPU it reads
the actual APIC ID, which makes apic_get_initial_apicid() obsolete
once everything is converted over.
Provide a temporary helper function topo_converted() which shields off the
not yet converted CPU vendors from invoking code which would break them.
This shielding covers all vendor CPUs which support SMP, but not the
historical pure UP ones as they only need the topology info init and
eventually the initial APIC initialization.
Provide two new members in cpuinfo_x86::topo to store the maximum number of
SMT siblings and the number of dies per package and add them to the debugfs
readout. These two members will be used to populate this information on the
boot CPU and to validate the APs against it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240212153624.581436579@linutronix.de
Provide a few helper functions to read CPUID leafs or individual registers
into a data structure without requiring unions.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Juergen Gross <jgross@suse.com>
Tested-by: Sohil Mehta <sohil.mehta@intel.com>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Wang Wendy <wendy.wang@intel.com>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/878r3mg570.ffs@tglx
This function now deals only with discarding overflow entries on ring
free and exit, and it no longer returns whether we successfully flushed
all entries as there's no CQE posting involved anymore. Kill the
outdated comment.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Verifier log avoids printing the same source code line multiple times
when a consecutive block of BPF assembly instructions are covered by the
same original (C) source code line. This greatly improves verifier log
legibility.
Unfortunately, this check is imperfect and in production applications it
quite often happens that verifier log will have multiple duplicated
source lines emitted, for no apparently good reason. E.g., this is
excerpt from a real-world BPF application (with register states omitted
for clarity):
BEFORE
======
; for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) { @ strobemeta_probe.bpf.c:394
5369: (07) r8 += 2 ;
5370: (07) r7 += 16 ;
; for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) { @ strobemeta_probe.bpf.c:394
5371: (07) r9 += 1 ;
5372: (79) r4 = *(u64 *)(r10 -32) ;
; for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) { @ strobemeta_probe.bpf.c:394
5373: (55) if r9 != 0xf goto pc+2
; if (i >= map->cnt) @ strobemeta_probe.bpf.c:396
5376: (79) r1 = *(u64 *)(r10 -40) ;
5377: (79) r1 = *(u64 *)(r1 +8) ;
; if (i >= map->cnt) @ strobemeta_probe.bpf.c:396
5378: (dd) if r1 s<= r9 goto pc-5 ;
; descr->key_lens[i] = 0; @ strobemeta_probe.bpf.c:398
5379: (b4) w1 = 0 ;
5380: (6b) *(u16 *)(r8 -30) = r1 ;
; task, data, off, STROBE_MAX_STR_LEN, map->entries[i].key); @ strobemeta_probe.bpf.c:400
5381: (79) r3 = *(u64 *)(r7 -8) ;
5382: (7b) *(u64 *)(r10 -24) = r6 ;
; task, data, off, STROBE_MAX_STR_LEN, map->entries[i].key); @ strobemeta_probe.bpf.c:400
5383: (bc) w6 = w6 ;
; barrier_var(payload_off); @ strobemeta_probe.bpf.c:280
5384: (bf) r2 = r6 ;
5385: (bf) r1 = r4 ;
As can be seen, line 394 is emitted thrice, 396 is emitted twice, and
line 400 is duplicated as well. Note that there are no intermingling
other lines of source code in between these duplicates, so the issue is
not compiler reordering assembly instruction such that multiple original
source code lines are in effect.
It becomes more obvious what's going on if we look at *full* original line info
information (using btfdump for this, [0]):
#2764: line: insn #5363 --> 394:3 @ ./././strobemeta_probe.bpf.c
for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) {
#2765: line: insn #5373 --> 394:21 @ ./././strobemeta_probe.bpf.c
for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) {
#2766: line: insn #5375 --> 394:47 @ ./././strobemeta_probe.bpf.c
for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) {
#2767: line: insn #5377 --> 394:3 @ ./././strobemeta_probe.bpf.c
for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) {
#2768: line: insn #5378 --> 414:10 @ ./././strobemeta_probe.bpf.c
return off;
We can see that there are four line info records covering
instructions #5363 through #5377 (instruction indices are shifted due to
subprog instruction being appended to main program), all of them are
pointing to the same C source code line #394. But each of them points to
a different part of that line, which is denoted by differing column
numbers (3, 21, 47, 3).
But verifier log doesn't distinguish between parts of the same source code line
and doesn't emit this column number information, so for end user it's just a
repetitive visual noise. So let's improve the detection of repeated source code
line and avoid this.
With the changes in this patch, we get this output for the same piece of BPF
program log:
AFTER
=====
; for (int i = 0; i < STROBE_MAX_MAP_ENTRIES; ++i) { @ strobemeta_probe.bpf.c:394
5369: (07) r8 += 2 ;
5370: (07) r7 += 16 ;
5371: (07) r9 += 1 ;
5372: (79) r4 = *(u64 *)(r10 -32) ;
5373: (55) if r9 != 0xf goto pc+2
; if (i >= map->cnt) @ strobemeta_probe.bpf.c:396
5376: (79) r1 = *(u64 *)(r10 -40) ;
5377: (79) r1 = *(u64 *)(r1 +8) ;
5378: (dd) if r1 s<= r9 goto pc-5 ;
; descr->key_lens[i] = 0; @ strobemeta_probe.bpf.c:398
5379: (b4) w1 = 0 ;
5380: (6b) *(u16 *)(r8 -30) = r1 ;
; task, data, off, STROBE_MAX_STR_LEN, map->entries[i].key); @ strobemeta_probe.bpf.c:400
5381: (79) r3 = *(u64 *)(r7 -8) ;
5382: (7b) *(u64 *)(r10 -24) = r6 ;
5383: (bc) w6 = w6 ;
; barrier_var(payload_off); @ strobemeta_probe.bpf.c:280
5384: (bf) r2 = r6 ;
5385: (bf) r1 = r4 ;
All the duplication is gone and the log is cleaner and less distracting.
[0] https://github.com/anakryiko/btfdump
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240214174100.2847419-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
drm/i915 feature pull for v6.9:
Features and functionality:
- Early transport for panel replay and PSR (Jouni)
- New ARL PCI IDs (Matt)
- DP TPS4 PHY test pattern support (Khaled)
Refactoring and cleanups:
- Unify and improve VSC SDP for PSR and non-PSR cases (Jouni)
- Refactor memory regions and improve debug logging (Ville)
- Rework global state serialization (Ville)
- Remove unused CDCLK divider fields (Gustavo)
- Unify HDCP connector logging format (Jani)
- Use display instead of graphics version in display code (Jani)
- Move VBT and opregion debugfs next to the implementation (Jani)
- Abstract opregion interface, use opaque type (Jani)
Fixes:
- Fix MTL stolen memory access (Ville)
- Fix initial display plane readout for MTL (Ville)
- Fix HPD handling during driver init/shutdown (Imre)
- Cursor vblank evasion fixes (Ville)
- Various VSC SDP fixes (Jouni)
- Allow PSR mode changes without full modeset (Jouni)
- Fix CDCLK sanitization on module load for Xe2_LPD (Gustavo)
- Fix the max DSC bpc supported by the source (Ankit)
- Add missing LNL ALPM AUX wake configuration (Jouni)
- Cx0 PHY state readout and verify fixes (Mika)
- Fix PSR (panel replay) debugfs for MST connectors (Imre)
- Fail HDCP repeater authentication if Type1 device not present (Suraj)
- Ratelimit debug logging in vm_fault_ttm (Nirmoy)
- Use a fake PCH for MTL because south display is not on the PCH (Haridhar)
- Disable DSB for Xe driver for now (José)
- Fix some LNL display register changes (Lucas)
- Fix build on ChromeOS (Paz Zcharya)
- Preserve current shared DPLL for fastsets on Type-C ports (Ville)
- Fix state checker warnings for MG/TC/TBT PLLs (Ville)
- Fix HDCP repeater ctl register value on errors (Jani)
- Allow FBC with CCS modifiers on SKL+ (Ville)
- Fix HDCP GGTT pinning (Ville)
DRM core changes:
- Add ratelimited drm dbg print (Nirmoy)
- DPCD PSR early transport macro (Jouni)
Merges:
- Backmerge drm-next to bring Xe driver to drm-intel-next (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87cyt8cxsh.fsf@intel.com