Commit graph

1,294,546 commits

Author SHA1 Message Date
Martin Hundebøll
b6b640c044 can: tcan4x5x: support resuming from rx interrupt signal
Implement the "wakeup-source" device tree property, so the chip is left
running when suspending, and its rx interrupt is used as a wakeup source
to resume operation.

Signed-off-by: Martin Hundebøll <martin@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-14 13:44:02 +01:00
Martin Hundebøll
4a94d7e31c can: m_can: allow keeping the transceiver running in suspend
Add a flag to the device class structure that leaves the chip in a
running state with rx interrupt enabled, so that an m_can device driver
can configure and use the interrupt as a wakeup source.

Signed-off-by: Martin Hundebøll <martin@geanix.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-14 13:44:02 +01:00
Martin Hundebøll
b00cf4f629 dt-bindings: can: tcan4x5x: Document the wakeup-source flag
Let it be known that the tcan4x5x device can now be configured to wake
the host from suspend when a can frame is received.

Signed-off-by: Martin Hundebøll <martin@geanix.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
[mkl: make first the first patch]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-14 13:44:02 +01:00
Mark Brown
81ff296a81
ASoC: meson: aiu: fix function pointer type
Merge series from Jerome Brunet <jbrunet@baylibre.com>:

This patchset fixes 2 -Wcast-function-type-strict warning in amlogic
audio drivers with clang 16.
2024-02-14 12:17:04 +00:00
Catalin Popescu
d1d77120bc net: phy: dp83826: support TX data voltage tuning
DP83826 offers the possibility to tune the voltage of logical
levels of the MLT-3 encoded TX data. This is useful when there
is a voltage drop in between the PHY and the connector and we
want to increase the voltage levels to compensate for that drop.

Prior to PHY configuration, the driver SW resets the PHY which has
the same effect as the HW reset pin according to the datasheet.
Hence, there's no need to force update the VOD_CFG registers to make
sure they hold their reset values. VOD_CFG registers need to be
updated only if the DT has been configured with values other than
the reset ones.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 12:06:10 +00:00
Catalin Popescu
ed1d7dac08 dt-bindings: net: dp83826: support TX data voltage tuning
Add properties ti,cfg-dac-minus-one-bp/ti,cfg-dac-plus-one-bp
to support voltage tuning of logical levels -1/+1 of the MLT-3
encoded TX data.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 12:06:09 +00:00
Mark Brown
2775f88bec
ASoC: SOF: Extend ChainDMA and DSPless mode to LNL+
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:

For both ChainDMA and DSPless mode the requirement is that the link must
be serviced by HD-DMA.
On pre Lunar Lake platforms this was only valid for HDAudio links but with
Lunar Lake all link types now serviced by HD-DMA.

This allows us to enable ChainDMA and DSPless mode for SoundWire links as
well.
2024-02-14 11:41:32 +00:00
David S. Miller
7c754e6a6c Merge branch 'dev_base_lock-remove'
Eric Dumazet says:

====================
net: complete dev_base_lock removal

Back in 2009 we started an effort to get rid of dev_base_lock
in favor of RCU.

It is time to finish this work.

Say goodbye to dev_base_lock !

v4: rebase, and move dev_addr_sem to net/core/dev.h in patch 06/13 (Jakub)

v3: I misread kbot reports, the issue was with dev->operstate (patch 10/13)
    So dev->reg_state is back to u8, and dev->operstate becomes an u32.
    Sorry for the noise.

v2: dev->reg_state must be a standard enum, some arches
    do not support cmpxchg() on u8.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:20:14 +00:00
Eric Dumazet
1b3ef46cb7 net: remove dev_base_lock
dev_base_lock is not needed anymore, all remaining users also hold RTNL.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:20:14 +00:00
Eric Dumazet
e51b962438 net: remove dev_base_lock from register_netdevice() and friends.
RTNL already protects writes to dev->reg_state, we no longer need to hold
dev_base_lock to protect the readers.

unlist_netdevice() second argument can be removed.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:20:14 +00:00
Eric Dumazet
2dd4d828d6 net: remove dev_base_lock from do_setlink()
We hold RTNL here, and dev->link_mode readers already
are using READ_ONCE().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:20:14 +00:00
Eric Dumazet
6a2968ee1e net: add netdev_set_operstate() helper
dev_base_lock is going away, add netdev_set_operstate() helper
so that hsr does not have to know core internals.

Remove dev_base_lock acquisition from rfc2863_policy()

v3: use an "unsigned int" for dev->operstate,
    so that try_cmpxchg() can work on all arches.
        ( https://lore.kernel.org/oe-kbuild-all/202402081918.OLyGaea3-lkp@intel.com/ )

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:20:13 +00:00
Eric Dumazet
328771deab net: remove stale mentions of dev_base_lock in comments
Change comments incorrectly mentioning dev_base_lock.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:20:13 +00:00
Eric Dumazet
e154bb7a6e net-sysfs: convert netstat_show() to RCU
dev_get_stats() can be called from RCU, there is no need
to acquire dev_base_lock.

Change dev_isalive() comment to reflect we no longer use
dev_base_lock from net/core/net-sysfs.c

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:20:13 +00:00
Eric Dumazet
004d138364 net-sysfs: convert dev->operstate reads to lockless ones
operstate_show() can omit dev_base_lock acquisition only
to read dev->operstate.

Annotate accesses to dev->operstate.

Writers still acquire dev_base_lock for mutual exclusion.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:20:13 +00:00
Eric Dumazet
c7d52737e7 net-sysfs: use dev_addr_sem to remove races in address_show()
Using dev_base_lock is not preventing from reading garbage.

Use dev_addr_sem instead.

v4: place dev_addr_sem extern in net/core/dev.h (Jakub Kicinski)
 Link: https://lore.kernel.org/netdev/20240212175845.10f6680a@kernel.org/

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:20:13 +00:00
Eric Dumazet
12692e3df2 net-sysfs: convert netdev_show() to RCU
Make clear dev_isalive() can be called with RCU protection.

Then convert netdev_show() to RCU, to remove dev_base_lock
dependency.

Also add RCU to broadcast_show().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:20:13 +00:00
Eric Dumazet
4d42b37def net: convert dev->reg_state to u8
Prepares things so that dev->reg_state reads can be lockless,
by adding WRITE_ONCE() on write side.

READ_ONCE()/WRITE_ONCE() do not support bitfields.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:20:13 +00:00
Eric Dumazet
a6473fe9b6 dev: annotate accesses to dev->link
Following patch will read dev->link locklessly,
annotate the write from do_setlink().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:20:13 +00:00
Eric Dumazet
f694eee9e1 ip_tunnel: annotate data-races around t->parms.link
t->parms.link is read locklessly, annotate these reads
and opposite writes accordingly.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:20:13 +00:00
Eric Dumazet
1c07dbb0cc net: annotate data-races around dev->name_assign_type
name_assign_type_show() runs locklessly, we should annotate
accesses to dev->name_assign_type.

Alternative would be to grab devnet_rename_sem semaphore
from name_assign_type_show(), but this would not bring
more accuracy.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:20:13 +00:00
Leonard Göhrs
7fd195f01a ARM: dts: stm32: lxa-tac: reduce RGMII interface drive strength
This results in an improvement of EMI performance by reducing the
125MHz emission and its harmonics caused by the RGMII clock line.

Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
2024-02-14 12:09:41 +01:00
David S. Miller
b7f9ef7278 Merge branch 'per-epoll-context-busy-poll'
Joe Damato says:

====================
Per epoll context busy poll support

Greetings:

Welcome to v8.

TL;DR This builds on commit bf3b9f6372 ("epoll: Add busy poll support to
epoll with socket fds.") by allowing user applications to enable
epoll-based busy polling, set a busy poll packet budget, and enable or
disable prefer busy poll on a per epoll context basis.

This makes epoll-based busy polling much more usable for user
applications than the current system-wide sysctl and hardcoded budget.

To allow for this, two ioctls have been added for epoll contexts for
getting and setting a new struct, struct epoll_params.

ioctl was chosen vs a new syscall after reviewing a suggestion by Willem
de Bruijn [1]. I am open to using a new syscall instead of an ioctl, but it
seemed that:
  - Busy poll affects all existing epoll_wait and epoll_pwait variants in
    the same way, so new verions of many syscalls might be needed. It
    seems much simpler for users to use the correct
    epoll_wait/epoll_pwait for their app and add a call to ioctl to enable
    or disable busy poll as needed. This also probably means less work to
    get an existing epoll app using busy poll.

  - previously added epoll_pwait2 helped to bring epoll closer to
    existing syscalls (like pselect and ppoll) and this busy poll change
    reflected as a new syscall would not have the same effect.

Note: patch 1/4 as of v4 uses an or (||) instead of an xor. I thought about
it some more and I realized that if the user enables both the per-epoll
context setting and the system wide sysctl, then busy poll should be
enabled and not disabled. Using xor doesn't seem to make much sense after
thinking through this a bit.

Longer explanation:

Presently epoll has support for a very useful form of busy poll based on
the incoming NAPI ID (see also: SO_INCOMING_NAPI_ID [2]).

This form of busy poll allows epoll_wait to drive NAPI packet processing
which allows for a few interesting user application designs which can
reduce latency and also potentially improve L2/L3 cache hit rates by
deferring NAPI until userland has finished its work.

The documentation available on this is, IMHO, a bit confusing so please
allow me to explain how one might use this:

1. Ensure each application thread has its own epoll instance mapping
1-to-1 with NIC RX queues. An n-tuple filter would likely be used to
direct connections with specific dest ports to these queues.

2. Optionally: Setup IRQ coalescing for the NIC RX queues where busy
polling will occur. This can help avoid the userland app from being
pre-empted by a hard IRQ while userland is running. Note this means that
userland must take care to call epoll_wait and not take too long in
userland since it now drives NAPI via epoll_wait.

3. Optionally: Consider using napi_defer_hard_irqs and gro_flush_timeout to
further restrict IRQ generation from the NIC. These settings are
system-wide so their impact must be carefully weighed against the running
applications.

4. Ensure that all incoming connections added to an epoll instance
have the same NAPI ID. This can be done with a BPF filter when
SO_REUSEPORT is used or getsockopt + SO_INCOMING_NAPI_ID when a single
accept thread is used which dispatches incoming connections to threads.

5. Lastly, busy poll must be enabled via a sysctl
(/proc/sys/net/core/busy_poll).

Please see Eric Dumazet's paper about busy polling [3] and a recent
academic paper about measured performance improvements of busy polling [4]
(albeit with a modification that is not currently present in the kernel)
for additional context.

The unfortunate part about step 5 above is that this enables busy poll
system-wide which affects all user applications on the system,
including epoll-based network applications which were not intended to
be used this way or applications where increased CPU usage for lower
latency network processing is unnecessary or not desirable.

If the user wants to run one low latency epoll-based server application
with epoll-based busy poll, but would like to run the rest of the
applications on the system (which may also use epoll) without busy poll,
this system-wide sysctl presents a significant problem.

This change preserves the system-wide sysctl, but adds a mechanism (via
ioctl) to enable or disable busy poll for epoll contexts as needed by
individual applications, making epoll-based busy poll more usable.

Note that this change includes an or (as of v4) instead of an xor. If the
user has enabled both the system-wide sysctl and also the per epoll-context
busy poll settings, then epoll should probably busy poll (vs being
disabled).

Thanks,
Joe

v7 -> v8:
   - Reviewed-by tag from Eric Dumazet applied to commit message of patch
     1/4.

   - patch 4/4:
     - EPIOCSPARAMS and EPIOCGPARAMS updated to use WRITE_ONCE and
       READ_ONCE, as requested by Eric Dumazet
     - Wrapped a long line (via netdev/checkpatch)

v6 -> v7:
   - Acked-by tags from Stanislav Fomichev applied to commit messages of
     all patches.
   - Reviewed-by tags from Jakub Kicinski, Eric Dumazet applied to commit
     messages of patches 2 and 3. Jiri Slaby's Reviewed-by applied to patch
     4.

   - patch 1/4:
     - busy_poll_usecs reduced from u64 to u32.
     - Unnecessary parens removed (via netdev/checkpatch)
     - Wrapped long line (via netdev/checkpatch)
     - Remove inline from busy_loop_ep_timeout as objdump suggests the
       function is already inlined
     - Moved struct eventpoll assignment to declaration
     - busy_loop_ep_timeout is moved within CONFIG_NET_RX_BUSY_POLL and the
       ifdefs internally have been removed as per Eric Dumazet's review
     - Removed ep_busy_loop_on from the !defined CONFIG_NET_RX_BUSY_POLL
       section as it is only called when CONFIG_NET_RX_BUSY_POLL is
       defined

   - patch 3/4:
     - Fix whitespace alignment issue (via netdev/checkpatch)

   - patch 4/4:
     - epoll_params.busy_poll_usecs has been reduced to u32
     - epoll_params.busy_poll_usecs is now checked to ensure it is <=
       S32_MAX
     - __pad has been reduced to a single u8
     - memchr_inv has been dropped and replaced with a simple check for the
       single __pad byte
     - Removed space after cast (via netdev/checkpatch)
     - Wrap long line (via netdev/checkpatch)
     - Move struct eventpoll *ep assignment to declaration as per Jiri
       Slaby's review
     - Remove unnecessary !! as per Jiri Slaby's review
     - Reorganized variables to be reverse christmas tree order

v5 -> v6:
  - patch 1/3 no functional change, but commit message corrected to explain
    that an or (||) is being used instead of xor.

  - patch 3/4 is a new patch which adds support for per epoll context
    prefer busy poll setting.

  - patch 4/4 updated to allow getting/setting per epoll context prefer
    busy poll setting; this setting is limited to either 0 or 1.

v4 -> v5:
  - patch 3/3 updated to use memchr_inv to ensure that __pad is zero for
    the EPIOCSPARAMS ioctl. Recommended by Greg K-H [5], Dave Chinner [6],
    and Jiri Slaby [7].

v3 -> v4:
  - patch 1/3 was updated to include an important functional change:
    ep_busy_loop_on was updated to use or (||) instead of xor (^). After
    thinking about it a bit more, I thought xor didn't make much sense.
    Enabling both the per-epoll context and the system-wide sysctl should
    probably enable busy poll, not disable it. So, or (||) makes more
    sense, I think.

  - patch 3/3 was updated:
    - to change the epoll_params fields to be __u64, __u16, and __u8 and
      to pad the struct to a multiple of 64bits. Suggested by Greg K-H [8]
      and Arnd Bergmann [9].
    - remove an unused pr_fmt, left over from the previous revision.
    - ioctl now returns -EINVAL when epoll_params.busy_poll_usecs >
      U32_MAX.

v2 -> v3:
  - cover letter updated to mention why ioctl seems (to me) like a better
    choice vs a new syscall.

  - patch 3/4 was modified in 3 ways:
    - when an unknown ioctl is received, -ENOIOCTLCMD is returned instead
      of -EINVAL as the ioctl documentation requires.
    - epoll_params.busy_poll_budget can only be set to a value larger than
      NAPI_POLL_WEIGHT if code is run by privileged (CAP_NET_ADMIN) users.
      Otherwise, -EPERM is returned.
    - busy poll specific ioctl code moved out to its own function. On
      kernels without busy poll support, -EOPNOTSUPP is returned. This also
      makes the kernel build robot happier without littering the code with
      more #ifdefs.

  - dropped patch 4/4 after Eric Dumazet's review of it when it was sent
    independently to the list [10].

v1 -> v2:
  - cover letter updated to make a mention of napi_defer_hard_irqs and
    gro_flush_timeout as an added step 3 and to cite both Eric Dumazet's
    busy polling paper and a paper from University of Waterloo for
    additional context. Specifically calling out the xor in patch 1/4
    incase it is missed by reviewers.

  - Patch 2/4 has its commit message updated, but no functional changes.
    Commit message now describes that allowing for a settable budget helps
    to improve throughput and is more consistent with other busy poll
    mechanisms that allow a settable budget via SO_BUSY_POLL_BUDGET.

  - Patch 3/4 was modified to check if the epoll_params.busy_poll_budget
    exceeds NAPI_POLL_WEIGHT. The larger value is allowed, but an error is
    printed. This was done for consistency with netif_napi_add_weight,
    which does the same.

  - Patch 3/4 the struct epoll_params was updated to fix the type of the
    data field; it was uint8_t and was changed to u8.

  - Patch 4/4 added to check if SO_BUSY_POLL_BUDGET exceeds
    NAPI_POLL_WEIGHT. The larger value is allowed, but an error is
    printed. This was done for consistency with netif_napi_add_weight,
    which does the same.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:01:01 +00:00
Joe Damato
18e2bf0edf eventpoll: Add epoll ioctl for epoll_params
Add an ioctl for getting and setting epoll_params. User programs can use
this ioctl to get and set the busy poll usec time, packet budget, and
prefer busy poll params for a specific epoll context.

Parameters are limited:
  - busy_poll_usecs is limited to <= s32_max
  - busy_poll_budget is limited to <= NAPI_POLL_WEIGHT by unprivileged
    users (!capable(CAP_NET_ADMIN))
  - prefer_busy_poll must be 0 or 1
  - __pad must be 0

Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:01:01 +00:00
Joe Damato
de57a25108 eventpoll: Add per-epoll prefer busy poll option
When using epoll-based busy poll, the prefer_busy_poll option is hardcoded
to false. Users may want to enable prefer_busy_poll to be used in
conjunction with gro_flush_timeout and defer_hard_irqs_count to keep device
IRQs masked.

Other busy poll methods allow enabling or disabling prefer busy poll via
SO_PREFER_BUSY_POLL, but epoll-based busy polling uses a hardcoded value.

Fix this edge case by adding support for a per-epoll context
prefer_busy_poll option. The default is false, as it was hardcoded before
this change.

Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:01:00 +00:00
Joe Damato
c6aa2a7778 eventpoll: Add per-epoll busy poll packet budget
When using epoll-based busy poll, the packet budget is hardcoded to
BUSY_POLL_BUDGET (8). Users may desire larger busy poll budgets, which
can potentially increase throughput when busy polling under high network
load.

Other busy poll methods allow setting the busy poll budget via
SO_BUSY_POLL_BUDGET, but epoll-based busy polling uses a hardcoded
value.

Fix this edge case by adding support for a per-epoll context busy poll
packet budget. If not specified, the default value (BUSY_POLL_BUDGET) is
used.

Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:01:00 +00:00
Joe Damato
85455c795c eventpoll: support busy poll per epoll instance
Allow busy polling on a per-epoll context basis. The per-epoll context
usec timeout value is preferred, but the pre-existing system wide sysctl
value is still supported if it specified.

busy_poll_usecs is a u32, but in a follow up patch the ioctl provided to
the user only allows setting a value from 0 to S32_MAX.

Signed-off-by: Joe Damato <jdamato@fastly.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 11:01:00 +00:00
Kamal Heib
723615a14b net: ena: Remove redundant assignment
There is no point in initializing an ndo to NULL, therefore the
assignment is redundant and can be removed.

Signed-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Acked-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 10:57:25 +00:00
Dmitry Antipov
6cf9ff4633 net: smc: fix spurious error message from __sock_release()
Commit 67f562e3e1 ("net/smc: transfer fasync_list in case of fallback")
leaves the socket's fasync list pointer within a container socket as well.
When the latter is destroyed, '__sock_release()' warns about its non-empty
fasync list, which is a dangling pointer to previously freed fasync list
of an underlying TCP socket. Fix this spurious warning by nullifying
fasync list of a container socket.

Fixes: 67f562e3e1 ("net/smc: transfer fasync_list in case of fallback")
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 10:56:02 +00:00
David S. Miller
d9a31cdab7 Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-02-12 (i40e)

This series contains updates to i40e driver only.

Ivan Vecera corrects the looping value used while waiting for queues to
be disabled as well as an incorrect mask being used for DCB
configuration.

Maciej resolves an issue related to XDP traffic; removing a double call to
i40e_pf_rxq_wait() and accounting for XDP rings when stopping rings.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 10:37:33 +00:00
Hariprasad Kelam
997814491c Octeontx2-af: Fetch MAC channel info from firmware
Packet ingress and egress MAC/serdes channel numbers are configurable
on CN10K series of silicons. These channel numbers inturn used while
installing MCAM rules to match ingress/egress port. Fetch these channel
numbers from firmware at driver init time.

Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 10:35:25 +00:00
David S. Miller
b53e84645b Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-02-12 (ice)

This series contains updates to ice driver only.

Grzegorz adds support for E825-C devices.

Wojciech reworks devlink reload to fulfill expected conditions (remove
and readd).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 10:25:27 +00:00
Francesco Dolcini
e517293fd7 can: m_can: remove redundant check for pm_clock_support
m_can_clk_start() already skip starting the clock when
clock support is disabled, remove the redundant check in
m_can_class_register().

This also solves the imbalance with m_can_clk_stop() that is called
afterward in the same function before the return.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240104235723.46931-1-francesco@dolcini.it
[mkl: rebased to net-next/main]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2024-02-14 11:24:30 +01:00
Randy Dunlap
4276d28e1d iosys-map: fix typo
Correct a spello/typo in comments.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213224219.10644-1-rdunlap@infradead.org
2024-02-14 11:14:40 +01:00
Randy Dunlap
50735922ed drm: drm_crtc: correct some comments
Fix some typos and punctuation.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240213061733.8068-1-rdunlap@infradead.org
2024-02-14 11:14:06 +01:00
Ulf Hansson
0deb3c2ac9 mmc: Merge branch fixes into next
Merge the mmc fixes for v6.8-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.9.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-14 11:09:02 +01:00
Christophe Kerello
6b1ba3f904 mmc: mmci: stm32: fix DMA API overlapping mappings warning
Turning on CONFIG_DMA_API_DEBUG_SG results in the following warning:

DMA-API: mmci-pl18x 48220000.mmc: cacheline tracking EEXIST,
overlapping mappings aren't supported
WARNING: CPU: 1 PID: 51 at kernel/dma/debug.c:568
add_dma_entry+0x234/0x2f4
Modules linked in:
CPU: 1 PID: 51 Comm: kworker/1:2 Not tainted 6.1.28 #1
Hardware name: STMicroelectronics STM32MP257F-EV1 Evaluation Board (DT)
Workqueue: events_freezable mmc_rescan
Call trace:
add_dma_entry+0x234/0x2f4
debug_dma_map_sg+0x198/0x350
__dma_map_sg_attrs+0xa0/0x110
dma_map_sg_attrs+0x10/0x2c
sdmmc_idma_prep_data+0x80/0xc0
mmci_prep_data+0x38/0x84
mmci_start_data+0x108/0x2dc
mmci_request+0xe4/0x190
__mmc_start_request+0x68/0x140
mmc_start_request+0x94/0xc0
mmc_wait_for_req+0x70/0x100
mmc_send_tuning+0x108/0x1ac
sdmmc_execute_tuning+0x14c/0x210
mmc_execute_tuning+0x48/0xec
mmc_sd_init_uhs_card.part.0+0x208/0x464
mmc_sd_init_card+0x318/0x89c
mmc_attach_sd+0xe4/0x180
mmc_rescan+0x244/0x320

DMA API debug brings to light leaking dma-mappings as dma_map_sg and
dma_unmap_sg are not correctly balanced.

If an error occurs in mmci_cmd_irq function, only mmci_dma_error
function is called and as this API is not managed on stm32 variant,
dma_unmap_sg is never called in this error path.

Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com>
Fixes: 46b723dd86 ("mmc: mmci: add stm32 sdmmc variant")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240207143951.938144-1-christophe.kerello@foss.st.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-14 11:05:27 +01:00
Damien Le Moal
4b085736e4 ata: libata-core: Do not try to set sleeping devices to standby
In ata ata_dev_power_set_standby(), check that the target device is not
sleeping. If it is, there is no need to do anything.

Fixes: aa3998dbeb ("ata: libata-scsi: Disable scsi device manage_system_start_stop")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-02-14 11:02:08 +01:00
David S. Miller
e1a00373e1 linux-can-next-for-6.9-20240213
-----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmXLUSQTHG1rbEBwZW5n
 dXRyb25peC5kZQAKCRAoOKI+ei28b6VMB/0eqFcC233/c60/7iEbxXTGG52qs4mc
 4LeTs57+4Msfibq7M81ZzBuZoMqFluFELunYT5gDPXgnSn4AWXyCv9ciYCW8vort
 Z/2wcSNUMdOIbmKZhdc96gnqXuE6fNMx/eYTsn34HBkMkM7BfxZSIH3pZsys+eGw
 JrVwhT2aBVKG5ji4YPZF/RuqHwuM00GLMs9G9GR6yw9JiCwI1n+Jjru/6zwJprpi
 NAyLhJGgvgp+twLID2jH2Gy6Mqs/ZrXMyxPMqycbYOtZ4oQJOfTkg1SXzT/J3GsY
 VFWvhGWrADSx7CnISuS9VXsoWpe5nZ7yMhFBOtKME3Gh3qmhQegPIMY3
 =w4J5
 -----END PGP SIGNATURE-----

Merge tag 'linux-can-next-for-6.9-20240213' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next

Marc Kleine-Budde says:

====================
linux-can-next-for-6.9-20240213

this is a pull request of 23 patches for net-next/master.

The first patch is by Nicolas Maier and targets the CAN Broadcast
Manager (bcm), it adds message flags to distinguish between own local
and remote traffic.

Oliver Hartkopp contributes a patch for the CAN ISOTP protocol that
adds dynamic flow control parameters.

Stefan Mätje's patch series add support for the esd PCIe/402 CAN
interface family.

Markus Schneider-Pargmann contributes 14 patches for the m_can to
optimize for the SPI attached tcan4x5x controller.

A patch by Vincent Mailhol replaces Wolfgang Grandegger by Vincent
Mailhol as the CAN drivers Co-Maintainer.

Jimmy Assarsson's patch add support for the Kvaser M.2 PCIe 4xCAN
adapter.

A patch by Daniil Dulov removed a redundant NULL check in the softing
driver.

Oliver Hartkopp contributes a patch to add CANXL virtual CAN network
identifier support.

A patch by myself removes Naga Sureshkumar Relli as the maintainer of
the xilinx_can driver, as their email bounces.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 10:00:35 +00:00
Ingo Molnar
4589f199eb Merge branch 'x86/bugs' into x86/core, to pick up pending changes before dependent patches
Merge in pending alternatives patching infrastructure changes, before
applying more patches.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2024-02-14 10:49:37 +01:00
Ingo Molnar
03c11eb3b1 Linux 6.8-rc4
-----BEGIN PGP SIGNATURE-----
 
 iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmXJK4UeHHRvcnZhbGRz
 QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGHsYH/jKmzKXDRsBCcw/Q
 HGUvFtpohWBOpN6efdf0nxilQisuyQrqKB9fnwvfcdE60VpqMJXFMdlFh/fonxPl
 JMbpk9y5uw48IJZA43NwTxUrjZ4wyWzv4ZF6YWa+5WdTAJpPLEPhhnLxcHOKklMr
 5Cm/7B/M7eB2BXBfc45b1pkKN22q9OXvjaKxZ+5wYmiMxS+GC8l8jiJ/WlHX78PR
 eLgsa1v732f2D7YF75wVhaoYepR+QzA9wTKqhjMNCEaVc2PQhA2JRsBXEt84qEIa
 FZigmf7LLc4ed9YA2XjRBZhAehe3cZVJZ1lasW37IATS921La2WfKuiysICJOtyT
 bGjK8tk=
 =Pt7W
 -----END PGP SIGNATURE-----

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
	arch/x86/include/asm/percpu.h
	arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2024-02-14 10:45:07 +01:00
Kent Gibson
e3f927f2b0 Documentation: gpio: consistently use logical line value terminology
Consistently use active/inactive to describe logical line values, rather
than high/low, which is used for physical values, or asserted/de-asserted
which is awkward.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[Bartosz: tweaked the commit subject to use imperative mood]
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-02-14 10:34:08 +01:00
Subbaraya Sundeep
858b31133d octeontx2-af: Remove the PF_FUNC validation for NPC transmit rules
NPC transmit side mcam rules can use the pcifunc (in packet metadata
added by hardware) of transmitting device for mcam lookup similar to
the channel of receiving device at receive side.
The commit 18603683d7 ("octeontx2-af: Remove channel verification
while installing MCAM rules") removed the receive side channel
verification to save hardware MCAM filters while switching packets
across interfaces but missed removing transmit side checks.
This patch removes transmit side rules validation.

Fixes: 18603683d7 ("octeontx2-af: Remove channel verification while installing MCAM rules")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-14 09:31:44 +00:00
Kent Gibson
9e69d6d84e Documentation: gpio: clarify sysfs line values are logical
Clarify that line values are logical, not physical, by replacing high/low
terminology with active/inactive.

Signed-off-by: Kent Gibson <warthog618@gmail.com>
Reviewed-by: Andy Shevchenko <amdy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
2024-02-14 10:28:48 +01:00
Dien Pham
713240877a pmdomain: renesas: Adjust the waiting time to cover the worst case
Description in HWM rev0.51E, 9.4 Usage notes, page 455 tells

	"It takes several hundreds of microseconds to shutting off and
	 resuming power domain. Because actual time required for
	 shutting off and resuming depends on the status of on-board
	 power line, shutoff/resume time is not guaranteed by
	 electrical specification"

Let's assume the safe value of waiting is about 1000us.

Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Tho Vu <tho.vu.wh@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/8734tx8b18.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-14 10:26:12 +01:00
Luca Weiss
5bf85865ea pmdomain: qcom: rpmpd: Add MSM8974PRO+PMA8084 power domains
Add the power domains CX & GFX found on MSM8974 devices that use PMA8084
instead of the standard PM8841+PM8941 combo.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240210-msm8974-rpmpd-v2-3-595e2ff80ea1@z3ntu.xyz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-14 10:26:12 +01:00
Luca Weiss
7547f9a027 pmdomain: qcom: rpmpd: Add MSM8974+PM8841 power domains
Add the power domains CX & GFX found on devices with MSM8974 and PM8841.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240210-msm8974-rpmpd-v2-2-595e2ff80ea1@z3ntu.xyz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-14 10:26:12 +01:00
Krzysztof Kozlowski
4af6bc163c pmdomain: core: constify of_phandle_args in add device and subdomain
Pointer to of_phandle_args is not modified by of_genpd_add_device() and
of_genpd_add_subdomain(), so it can be made pointer to const for code
safety and readability.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240208202822.631449-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-14 10:26:12 +01:00
Krzysztof Kozlowski
4d0824608a pmdomain: core: constify of_phandle_args in xlate
The xlate callbacks are supposed to translate of_phandle_args to proper
provider without modifying the of_phandle_args.  Make the argument
pointer to const for code safety and readability.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240208202822.631449-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-02-14 10:26:11 +01:00
Ulf Hansson
693c301a3a media: venus: Convert to dev_pm_domain_attach|detach_list() for vcodec
Let's avoid some of the boilerplate code to manage the vcodec PM domains,
by converting into using dev_pm_domain_attach|detach_list().

Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Cc: Vikash Garodia <quic_vgarodia@quicinc.com>
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konrad.dybcio@linaro.org>
Cc: <linux-media@vger.kernel.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240130123951.236243-6-ulf.hansson@linaro.org
2024-02-14 10:26:11 +01:00