It's possible that SIE exits for work that the host needs to perform
rather than something that is intended for the guest.
A Linux guest will ignore this intercept code since there is nothing
for it to do, but a more robust solution would rewind the PSW back to
the SIE instruction. This will transparently resume the guest once
the host completes its work, without the guest needing to process
what is effectively a NOP and re-issue SIE itself.
Signed-off-by: Eric Farman <farman@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20240301204342.3217540-1-farman@linux.ibm.com
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20240301204342.3217540-1-farman@linux.ibm.com>
This series cleans up the rmap intent code before we start adding
support for realtime devices. Similar to previous intent cleanup
patchsets, we start transforming the tracepoints so that the data
extraction are done inside the tracepoint code, and then we start
passing the intent itself to the _finish_one function. This reduces the
boxing and unboxing of parameters.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHQEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZoRK8QAKCRBKO3ySh0YR
pv9HAQDrS22rEdR5AQF9SNa51PlLXU2pmeWXI2S3S5pPaEB4kwD459rS5FPPCLxX
YTdZtfH+1sswe6rmGNW/5QShu1CoCg==
=koJ6
-----END PGP SIGNATURE-----
Merge tag 'rmap-intent-cleanups-6.11_2024-07-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.11-mergeB
xfs: rmap log intent cleanups
This series cleans up the rmap intent code before we start adding
support for realtime devices. Similar to previous intent cleanup
patchsets, we start transforming the tracepoints so that the data
extraction are done inside the tracepoint code, and then we start
passing the intent itself to the _finish_one function. This reduces the
boxing and unboxing of parameters.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'rmap-intent-cleanups-6.11_2024-07-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: move xfs_rmap_update_defer_add to xfs_rmap_item.c
xfs: simplify usage of the rcur local variable in xfs_rmap_finish_one
xfs: don't bother calling xfs_rmap_finish_one_cleanup in xfs_rmap_finish_one
xfs: reuse xfs_rmap_update_cancel_item
xfs: add a ri_entry helper
xfs: remove xfs_trans_set_rmap_flags
xfs: clean up rmap log intent item tracepoint callsites
xfs: pass btree cursors to rmap btree tracepoints
xfs: give rmap btree cursor error tracepoints their own class
This series cleans up some warts in the extent freeing log intent code.
We start by acknowledging that this mechanism does not have anything to
do with the bmap code by moving it to xfs_alloc.c and giving the
function a more descriptive name. Then we clean up the tracepoints and
the _finish_one call paths to pass the intent structure around. This
reduces the overhead when the tracepoints are disabled and will make
things much cleaner when we start adding realtime support in the next
patch. I also incorporated a bunch of cleanups from Christoph Hellwig.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZoRK8QAKCRBKO3ySh0YR
pvVaAP0XHwmK3MkBugz+kvEZ1IEtH3CoIZqU4q7sV/RqFyq69gEAzif/Qv/Cxpes
vTx1yKcl8azIChC5P7VUw394CyniEQc=
=nSoY
-----END PGP SIGNATURE-----
Merge tag 'extfree-intent-cleanups-6.11_2024-07-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.11-mergeB
xfs: extent free log intent cleanups
This series cleans up some warts in the extent freeing log intent code.
We start by acknowledging that this mechanism does not have anything to
do with the bmap code by moving it to xfs_alloc.c and giving the
function a more descriptive name. Then we clean up the tracepoints and
the _finish_one call paths to pass the intent structure around. This
reduces the overhead when the tracepoints are disabled and will make
things much cleaner when we start adding realtime support in the next
patch. I also incorporated a bunch of cleanups from Christoph Hellwig.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'extfree-intent-cleanups-6.11_2024-07-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: move xfs_extent_free_defer_add to xfs_extfree_item.c
xfs: remove xfs_defer_agfl_block
xfs: remove duplicate asserts in xfs_defer_extent_free
xfs: factor out a xfs_efd_add_extent helper
xfs: reuse xfs_extent_free_cancel_item
xfs: add a xefi_entry helper
xfs: pass the fsbno to xfs_perag_intent_get
xfs: convert "skip_discard" to a proper flags bitset
xfs: clean up extent free log intent item tracepoint callsites
This series hoists inode creation, renaming, and deletion operations to
libxfs in anticipation of the metadata inode directory feature, which
maintains a directory tree of metadata inodes. This will be necessary
for further enhancements to the realtime feature, subvolume support.
There aren't supposed to be any functional changes in this intense
refactoring -- we just split the functions into pieces that are generic
and pieces that are specific to libxfs clients. As a bonus, we can
remove various open-coded pieces of mkfs.xfs and xfs_repair when this
series gets to xfsprogs.
With a bit of luck, this should all go splendidly.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZoRK6wAKCRBKO3ySh0YR
pr/pAQD1GBjc/ua17nxhgoo4uRrFuL/SqBSJN+Uof6p+5l2U6AD8DM0hqtLHw9Le
AmXzXu3mMPCDydHZP/Pc0eRf39id0wc=
=i1VM
-----END PGP SIGNATURE-----
Merge tag 'inode-refactor-6.11_2024-07-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.11-mergeB
xfs: hoist inode operations to libxfs
This series hoists inode creation, renaming, and deletion operations to
libxfs in anticipation of the metadata inode directory feature, which
maintains a directory tree of metadata inodes. This will be necessary
for further enhancements to the realtime feature, subvolume support.
There aren't supposed to be any functional changes in this intense
refactoring -- we just split the functions into pieces that are generic
and pieces that are specific to libxfs clients. As a bonus, we can
remove various open-coded pieces of mkfs.xfs and xfs_repair when this
series gets to xfsprogs.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'inode-refactor-6.11_2024-07-02' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: don't use the incore struct xfs_sb for offsets into struct xfs_dsb
xfs: get rid of trivial rename helpers
xfs: move dirent update hooks to xfs_dir2.c
xfs: create libxfs helper to rename two directory entries
xfs: create libxfs helper to exchange two directory entries
xfs: create libxfs helper to remove an existing inode/name from a directory
xfs: hoist inode free function to libxfs
xfs: create libxfs helper to link an existing inode into a directory
xfs: create libxfs helper to link a new inode into a directory
xfs: separate the icreate logic around INIT_XATTRS
xfs: hoist xfs_{bump,drop}link to libxfs
xfs: hoist xfs_iunlink to libxfs
xfs: wrap inode creation dqalloc calls
xfs: push xfs_icreate_args creation out of xfs_create*
xfs: hoist new inode initialization functions to libxfs
xfs: split new inode creation into two pieces
xfs: use xfs_trans_ichgtime to set times when allocating inode
xfs: implement atime updates in xfs_trans_ichgtime
xfs: pack icreate initialization parameters into a separate structure
xfs: hoist project id get/set functions to libxfs
xfs: hoist inode flag conversion functions to libxfs
xfs: hoist extent size helpers to libxfs
xfs: move inode copy-on-write predicates to xfs_inode.[ch]
xfs: use consistent uid/gid when grabbing dquots for inodes
xfs: verify buffer, inode, and dquot items every tx commit
When handling an IO request, MD checks if a reshape is currently
happening, and if so, where the IO sector is in relation to the reshape
progress. MD uses conf->reshape_progress for both of these tasks. When
the reshape finishes, conf->reshape_progress is set to MaxSector. If
this occurs after MD checks if the reshape is currently happening but
before it calls ahead_of_reshape(), then ahead_of_reshape() will end up
comparing the IO sector against MaxSector. During a backwards reshape,
this will make MD think the IO sector is in the area not yet reshaped,
causing it to use the previous configuration, and map the IO to the
sector where that data was before the reshape.
This bug can be triggered by running the lvm2
lvconvert-raid-reshape-linear_to_raid6-single-type.sh test in a loop,
although it's very hard to reproduce.
Fix this by factoring the code that checks where the IO sector is in
relation to the reshape out to a helper called get_reshape_loc(),
which reads reshape_progress and reshape_safe while holding the
device_lock, and then rechecks if the reshape has finished before
calling ahead_of_reshape with the saved values.
Also use the helper during the REQ_NOWAIT check to see if the location
is inside of the reshape region.
Fixes: fef9c61fdf ("md/raid5: change reshape-progress measurement to cope with reshaping backwards.")
Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240702151802.1632010-1-bmarzins@redhat.com
Commit 90f5f7ad4f ("md: Wait for md_check_recovery before attempting
device removal.") explained in the commit message that failed device
must be reomoved from the personality first by md_check_recovery(),
before it can be removed from the array. That's the reason the commit
add the code to wait for MD_RECOVERY_NEEDED.
However, this is not the case now, because remove_and_add_spares() is
called directly from hot_remove_disk() from ioctl path, hence failed
device(marked faulty) can be removed from the personality by ioctl.
On the other hand, the commit introduced a performance problem that
if MD_RECOVERY_NEEDED is set and the array is not running, ioctl will
wait for 5s before it can return failure to user.
Since the waiting is not needed now, fix the problem by removing the
waiting.
Fixes: 90f5f7ad4f ("md: Wait for md_check_recovery before attempting device removal.")
Reported-by: Mateusz Kusiak <mateusz.kusiak@linux.intel.com>
Closes: https://lore.kernel.org/all/814ff6ee-47a2-4ba0-963e-cf256ee4ecfa@linux.intel.com/
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20240627112321.3044744-1-yukuai1@huaweicloud.com
'struct md_cluster_operations' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
51941 1442 80 53463 d0d7 drivers/md/md-cluster.o
After:
=====
text data bss dec hex filename
52133 1246 80 53459 d0d3 drivers/md/md-cluster.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/3727f3ce9693cae4e62ae6778ea13971df805479.1719173852.git.christophe.jaillet@wanadoo.fr
Syzbot reported that in rename directory operation on broken directory on
nilfs2, __block_write_begin_int() called to prepare block write may fail
BUG_ON check for access exceeding the folio/page size.
This is because nilfs_dotdot(), which gets parent directory reference
entry ("..") of the directory to be moved or renamed, does not check
consistency enough, and may return location exceeding folio/page size for
broken directories.
Fix this issue by checking required directory entries ("." and "..") in
the first chunk of the directory in nilfs_dotdot().
Link: https://lkml.kernel.org/r/20240628165107.9006-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+d3abed1ad3d367fa2627@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d3abed1ad3d367fa2627
Fixes: 2ba466d74e ("nilfs2: directory entry operations")
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
While investigating HVO for THPs [1], it turns out that speculative PFN
walkers like compaction can race with vmemmap modifications, e.g.,
CPU 1 (vmemmap modifier) CPU 2 (speculative PFN walker)
------------------------------- ------------------------------
Allocates an LRU folio page1
Sees page1
Frees page1
Allocates a hugeTLB folio page2
(page1 being a tail of page2)
Updates vmemmap mapping page1
get_page_unless_zero(page1)
Even though page1->_refcount is zero after HVO, get_page_unless_zero() can
still try to modify this read-only field, resulting in a crash.
An independent report [2] confirmed this race.
There are two discussed approaches to fix this race:
1. Make RO vmemmap RW so that get_page_unless_zero() can fail without
triggering a PF.
2. Use RCU to make sure get_page_unless_zero() either sees zero
page->_refcount through the old vmemmap or non-zero page->_refcount
through the new one.
The second approach is preferred here because:
1. It can prevent illegal modifications to struct page[] that has been
HVO'ed;
2. It can be generalized, in a way similar to ZERO_PAGE(), to fix
similar races in other places, e.g., arch_remove_memory() on x86
[3], which frees vmemmap mapping offlined struct page[].
While adding synchronize_rcu(), the goal is to be surgical, rather than
optimized. Specifically, calls to synchronize_rcu() on the error handling
paths can be coalesced, but it is not done for the sake of Simplicity:
noticeably, this fix removes ~50% more lines than it adds.
According to the hugetlb_optimize_vmemmap section in
Documentation/admin-guide/sysctl/vm.rst, enabling HVO makes allocating or
freeing hugeTLB pages "~2x slower than before". Having synchronize_rcu()
on top makes those operations even worse, and this also affects the user
interface /proc/sys/vm/nr_overcommit_hugepages.
This is *very* hard to trigger:
1. Most hugeTLB use cases I know of are static, i.e., reserved at
boot time, because allocating at runtime is not reliable at all.
2. On top of that, someone has to be very unlucky to get tripped
over above, because the race window is so small -- I wasn't able to
trigger it with a stress testing that does nothing but that (with
THPs though).
[1] https://lore.kernel.org/20240229183436.4110845-4-yuzhao@google.com/
[2] https://lore.kernel.org/917FFC7F-0615-44DD-90EE-9F85F8EA9974@linux.dev/
[3] https://lore.kernel.org/be130a96-a27e-4240-ad78-776802f57cad@redhat.com/
Link: https://lkml.kernel.org/r/20240627222705.2974207-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
syzbot detects that cachestat() is flushing stats, which can sleep, in its
RCU read section (see [1]). This is done in the workingset_test_recent()
step (which checks if the folio's eviction is recent).
Move the stat flushing step to before the RCU read section of cachestat,
and skip stat flushing during the recency check.
[1]: https://lore.kernel.org/cgroups/000000000000f71227061bdf97e0@google.com/
Link: https://lkml.kernel.org/r/20240627201737.3506959-1-nphamcs@gmail.com
Fixes: b006847222 ("mm: workingset: move the stats flush into workingset_test_recent()")
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Reported-by: syzbot+b7f13b2d0cc156edf61a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/cgroups/000000000000f71227061bdf97e0@google.com/
Debugged-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: <stable@vger.kernel.org> [6.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
In page_cache_ra_order(), the maximal order of the page cache to be
allocated shouldn't be larger than MAX_PAGECACHE_ORDER. Otherwise, it's
possible the large page cache can't be supported by xarray when the
corresponding xarray entry is split.
For example, HPAGE_PMD_ORDER is 13 on ARM64 when the base page size is
64KB. The PMD-sized page cache can't be supported by xarray.
Link: https://lkml.kernel.org/r/20240627003953.1262512-3-gshan@redhat.com
Fixes: 793917d997 ("mm/readahead: Add large folio readahead")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Zhenyu Zhang <zhenyzha@redhat.com>
Cc: <stable@vger.kernel.org> [5.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON keeps the number of regions under max_nr_regions by skipping regions
split operations when doing so can make the number higher than the limit.
It works well for preventing violation of the limit. But, if somehow the
violation happens, it cannot recovery well depending on the situation. In
detail, if the real number of regions having different access pattern is
higher than the limit, the mechanism cannot reduce the number below the
limit. In such a case, the system could suffer from high monitoring
overhead of DAMON.
The violation can actually happen. For an example, the user could reduce
max_nr_regions while DAMON is running, to be lower than the current number
of regions. Fix the problem by repeating the merge operations with
increasing aggressiveness in kdamond_merge_regions() for the case, until
the limit is met.
[sj@kernel.org: increase regions merge aggressiveness while respecting min_nr_regions]
Link: https://lkml.kernel.org/r/20240626164753.46270-1-sj@kernel.org
[sj@kernel.org: ensure max threshold attempt for max_nr_regions violation]
Link: https://lkml.kernel.org/r/20240627163153.75969-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240624175814.89611-1-sj@kernel.org
Fixes: b9a6ac4e4e ("mm/damon: adaptively adjust regions")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> [5.15+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Currently if we request a feature that is not set in the Kernel config we
fail silently and return all the available features. However, the man
page indicates we should return an EINVAL.
We need to fix this issue since we can end up with a Kernel warning should
a program request the feature UFFD_FEATURE_WP_UNPOPULATED on a kernel with
the config not set with this feature.
[ 200.812896] WARNING: CPU: 91 PID: 13634 at mm/memory.c:1660 zap_pte_range+0x43d/0x660
[ 200.820738] Modules linked in:
[ 200.869387] CPU: 91 PID: 13634 Comm: userfaultfd Kdump: loaded Not tainted 6.9.0-rc5+ #8
[ 200.877477] Hardware name: Dell Inc. PowerEdge R6525/0N7YGH, BIOS 2.7.3 03/30/2022
[ 200.885052] RIP: 0010:zap_pte_range+0x43d/0x660
Link: https://lkml.kernel.org/r/20240626130513.120193-1-audra@redhat.com
Fixes: e06f1e1dd4 ("userfaultfd: wp: enabled write protection in userfaultfd API")
Signed-off-by: Audra Mitchell <audra@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Rafael Aquini <raquini@redhat.com>
Cc: Shaohua Li <shli@fb.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The problem is that there are systems where cpu_possible_mask has gaps
between set CPUs, for example SPARC. In this scenario addr_to_vb_xa()
hash function can return an index which accesses to not-possible and not
setup CPU area using per_cpu() macro. This results in an oops on SPARC.
A per-cpu vmap_block_queue is also used as hash table, incorrectly
assuming the cpu_possible_mask has no gaps. Fix it by adjusting an index
to a next possible CPU.
Link: https://lkml.kernel.org/r/20240626140330.89836-1-urezki@gmail.com
Fixes: 062eacf57a ("mm: vmalloc: remove a global vmap_blocks xarray")
Reported-by: Nick Bowler <nbowler@draconx.ca>
Closes: https://lore.kernel.org/linux-kernel/ZntjIE6msJbF8zTa@MiWiFi-R3L-srv/T/
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Reviewed-by: Baoquan He <bhe@redhat.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hailong.Liu <hailong.liu@oppo.com>
Cc: Oleksiy Avramchenko <oleksiy.avramchenko@sony.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 5ec8e8ea8b ("mm/sparsemem: fix race in accessing
memory_section->usage") changed pfn_section_valid() to add a READ_ONCE()
call around "ms->usage" to fix a race with section_deactivate() where
ms->usage can be cleared. The READ_ONCE() call, by itself, is not enough
to prevent NULL pointer dereference. We need to check its value before
dereferencing it.
Link: https://lkml.kernel.org/r/20240626001639.1350646-1-longman@redhat.com
Fixes: 5ec8e8ea8b ("mm/sparsemem: fix race in accessing memory_section->usage")
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The name_assign_type indicates how the name is provided. Currently
these types are supported:
- RDMA_NAME_ASSIGN_TYPE_UNKNOWN: Unknown or not set;
- RDMA_NAME_ASSIGN_TYPE_USER: Name is provided by the user; The
user-created sub device, rxe and siw device has this type.
When filling nl device info, it is set in the new attribute
RDMA_NLDEV_ATTR_NAME_ASSIGN_TYPE. User-space tools like udev
"rdma_rename" could check this attribute to determine if this
device needs to be renamed or not.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/522591bef9a369cc8e5dcb77787e017bffee37fe.1719837610.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Reduce nodename string size to fit IB_DEVICE_NODE_DESC_MAX.
drivers/infiniband/hw/qib/qib_verbs.c: In function ‘qib_register_ib_device’:
drivers/infiniband/hw/qib/qib_verbs.c:1554:40: error: ‘%s’ directive output may be truncated writing up to 64 bytes into a region of size 43
[-Werror=format-truncation=]
1554 | "Intel Infiniband HCA %s", init_utsname()->nodename);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/hw/qib/qib_verbs.c:1553:9: note: ‘snprintf’ output between 22 and 86 bytes into a destination of size 64
1553 | snprintf(ibdev->node_desc, sizeof(ibdev->node_desc),
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1554 | "Intel Infiniband HCA %s", init_utsname()->nodename);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Link: https://lore.kernel.org/r/1fb6393fa2e0702fef995834c3c7db972bbc4d06.1719837715.git.leon@kernel.org
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
drivers/infiniband/hw/qib/qib_init.c: In function ‘qib_init_one’:
drivers/infiniband/hw/qib/qib_init.c:586:67: error: ‘%d’ directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 3 [-Werror=format-truncation=]
586 | snprintf(wq_name, sizeof(wq_name), "qib%d_%d",
| ^~
In function ‘qib_create_workqueues’,
inlined from ‘qib_init_one’ at drivers/infiniband/hw/qib/qib_init.c:1438:8:
drivers/infiniband/hw/qib/qib_init.c:586:60: note: directive argument in the range [-2147483643, 254]
586 | snprintf(wq_name, sizeof(wq_name), "qib%d_%d",
| ^~~~~~~~~~
drivers/infiniband/hw/qib/qib_init.c:586:25: note: ‘snprintf’ output between 7 and 27 bytes into a destination of size 8
586 | snprintf(wq_name, sizeof(wq_name), "qib%d_%d",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
587 | dd->unit, pidx);
| ~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Link: https://lore.kernel.org/r/ab5222c414a01e9d2c5129ef26836aace9ee2aa5.1719837715.git.leon@kernel.org
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
MS-SMB2 specification describes setting ->DeviceType to FILE_DEVICE_DISK
or FILE_DEVICE_CD_ROM. Set FILE_DEVICE_DISK instead of super magic in
FS_DEVICE_INFORMATION. And Set FILE_READ_ONLY_DEVICE for read-only share.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Zijian Zhang says:
====================
fix OOM and order check in msg_zerocopy selftest
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit
dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
And, we find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
====================
Link: https://patch.msgid.link/20240701225349.3395580-1-zijianzhang@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We find that when lock debugging is on, notifications may not come in
order. Thus, we have order checking outputs managed by cfg_verbose, to
avoid too many outputs in this case.
Fixes: 07b65c5b31 ("test: add msg_zerocopy test")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240701225349.3395580-3-zijianzhang@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In selftests/net/msg_zerocopy.c, it has a while loop keeps calling sendmsg
on a socket with MSG_ZEROCOPY flag, and it will recv the notifications
until the socket is not writable. Typically, it will start the receiving
process after around 30+ sendmsgs. However, as the introduction of commit
dfa2f04833 ("tcp: get rid of sysctl_tcp_adv_win_scale"), the sender is
always writable and does not get any chance to run recv notifications.
The selftest always exits with OUT_OF_MEMORY because the memory used by
opt_skb exceeds the net.core.optmem_max. Meanwhile, it could be set to a
different value to trigger OOM on older kernels too.
Thus, we introduce "cfg_notification_limit" to force sender to receive
notifications after some number of sendmsgs.
Fixes: 07b65c5b31 ("test: add msg_zerocopy test")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Signed-off-by: Xiaochun Lu <xiaochun.lu@bytedance.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240701225349.3395580-2-zijianzhang@bytedance.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-06-25 (ice)
This series contains updates to ice driver only.
Milena adds disabling of extts events when PTP is disabled.
Jake prevents possible NULL pointer by checking that timestamps are
ready before processing extts events and adds checks for unsupported
PTP pin configuration.
Petr Oros replaces _test_bit() with the correct test_bit() macro.
v1: https://lore.kernel.org/netdev/20240625170248.199162-1-anthony.l.nguyen@intel.com/
====================
Link: https://patch.msgid.link/20240702171459.2606611-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not use _test_bit() macro for testing bit. The proper macro for this
is one without underline.
_test_bit() is what test_bit() was prior to const-optimization. It
directly calls arch_test_bit(), i.e. the arch-specific implementation
(or the generic one). It's strictly _internal_ and shouldn't be used
anywhere outside the actual test_bit() macro.
test_bit() is a wrapper which checks whether the bitmap and the bit
number are compile-time constants and if so, it calls the optimized
function which evaluates this call to a compile-time constant as well.
If either of them is not a compile-time constant, it just calls _test_bit().
test_bit() is the actual function to use anywhere in the kernel.
IOW, calling _test_bit() avoids potential compile-time optimizations.
The sensors is not a compile-time constant, thus most probably there
are no object code changes before and after the patch.
But anyway, we shouldn't call internal wrappers instead of
the actual API.
Fixes: 4da71a77fc ("ice: read internal temperature sensor")
Acked-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver receives requests for configuring pins via the .enable
callback of the PTP clock object. These requests come into the driver
with flags which modify the requested behavior from userspace. Current
implementation in ice does not reject flags that it doesn't support.
This causes the driver to incorrectly apply requests with such flags as
PTP_PEROUT_DUTY_CYCLE, or any future flags added by the kernel which it
is not yet aware of.
Fix this by properly validating flags in both ice_ptp_cfg_perout and
ice_ptp_cfg_extts. Ensure that we check by bit-wise negating supported
flags rather than just checking and rejecting known un-supported flags.
This is preferable, as it ensures better compatibility with future
kernels.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_ptp_extts_event() function can race with ice_ptp_release() and
result in a NULL pointer dereference which leads to a kernel panic.
Panic occurs because the ice_ptp_extts_event() function calls
ptp_clock_event() with a NULL pointer. The ice driver has already
released the PTP clock by the time the interrupt for the next external
timestamp event occurs.
To fix this, modify the ice_ptp_extts_event() function to check the
PTP state and bail early if PTP is not ready.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Extts events are disabled and enabled by the application ts2phc.
However, in case where the driver is removed when the application is
running, a specific extts event remains enabled and can cause a kernel
crash.
As a side effect, when the driver is reloaded and application is started
again, remaining extts event for the channel from a previous run will
keep firing and the message "extts on unexpected channel" might be
printed to the user.
To avoid that, extts events shall be disabled when PTP is released.
Fixes: 172db5f91d ("ice: add support for auxiliary input/output pins")
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Co-developed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Milena Olech <milena.olech@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20240702171459.2606611-2-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzkaller reported a KMSAN splat in __unix_walk_scc() while backtracking
edge_stack after finalising SCC.
Let's add a test case exercising the path.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://patch.msgid.link/20240702160428.10153-2-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
KMSAN reported uninit-value access in __unix_walk_scc() [1].
In the list_for_each_entry_reverse() loop, when the vertex's index
equals it's scc_index, the loop uses the variable vertex as a
temporary variable that points to a vertex in scc. And when the loop
is finished, the variable vertex points to the list head, in this case
scc, which is a local variable on the stack (more precisely, it's not
even scc and might underflow the call stack of __unix_walk_scc():
container_of(&scc, struct unix_vertex, scc_entry)).
However, the variable vertex is used under the label prev_vertex. So
if the edge_stack is not empty and the function jumps to the
prev_vertex label, the function will access invalid data on the
stack. This causes the uninit-value access issue.
Fix this by introducing a new temporary variable for the loop.
[1]
BUG: KMSAN: uninit-value in __unix_walk_scc net/unix/garbage.c:478 [inline]
BUG: KMSAN: uninit-value in unix_walk_scc net/unix/garbage.c:526 [inline]
BUG: KMSAN: uninit-value in __unix_gc+0x2589/0x3c20 net/unix/garbage.c:584
__unix_walk_scc net/unix/garbage.c:478 [inline]
unix_walk_scc net/unix/garbage.c:526 [inline]
__unix_gc+0x2589/0x3c20 net/unix/garbage.c:584
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xade/0x1bf0 kernel/workqueue.c:3312
worker_thread+0xeb6/0x15b0 kernel/workqueue.c:3393
kthread+0x3c4/0x530 kernel/kthread.c:389
ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Uninit was stored to memory at:
unix_walk_scc net/unix/garbage.c:526 [inline]
__unix_gc+0x2adf/0x3c20 net/unix/garbage.c:584
process_one_work kernel/workqueue.c:3231 [inline]
process_scheduled_works+0xade/0x1bf0 kernel/workqueue.c:3312
worker_thread+0xeb6/0x15b0 kernel/workqueue.c:3393
kthread+0x3c4/0x530 kernel/kthread.c:389
ret_from_fork+0x6e/0x90 arch/x86/kernel/process.c:147
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
Local variable entries created at:
ref_tracker_free+0x48/0xf30 lib/ref_tracker.c:222
netdev_tracker_free include/linux/netdevice.h:4058 [inline]
netdev_put include/linux/netdevice.h:4075 [inline]
dev_put include/linux/netdevice.h:4101 [inline]
update_gid_event_work_handler+0xaa/0x1b0 drivers/infiniband/core/roce_gid_mgmt.c:813
CPU: 1 PID: 12763 Comm: kworker/u8:31 Not tainted 6.10.0-rc4-00217-g35bb670d65fc #32
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014
Workqueue: events_unbound __unix_gc
Fixes: 3484f06317 ("af_unix: Detect Strongly Connected Components.")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20240702160428.10153-1-syoshida@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In function bond_option_arp_ip_targets_set(), if newval->string is an
empty string, newval->string+1 will point to the byte after the
string, causing an out-of-bound read.
BUG: KASAN: slab-out-of-bounds in strlen+0x7d/0xa0 lib/string.c:418
Read of size 1 at addr ffff8881119c4781 by task syz-executor665/8107
CPU: 1 PID: 8107 Comm: syz-executor665 Not tainted 6.7.0-rc7 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd9/0x150 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:364 [inline]
print_report+0xc1/0x5e0 mm/kasan/report.c:475
kasan_report+0xbe/0xf0 mm/kasan/report.c:588
strlen+0x7d/0xa0 lib/string.c:418
__fortify_strlen include/linux/fortify-string.h:210 [inline]
in4_pton+0xa3/0x3f0 net/core/utils.c:130
bond_option_arp_ip_targets_set+0xc2/0x910
drivers/net/bonding/bond_options.c:1201
__bond_opt_set+0x2a4/0x1030 drivers/net/bonding/bond_options.c:767
__bond_opt_set_notify+0x48/0x150 drivers/net/bonding/bond_options.c:792
bond_opt_tryset_rtnl+0xda/0x160 drivers/net/bonding/bond_options.c:817
bonding_sysfs_store_option+0xa1/0x120 drivers/net/bonding/bond_sysfs.c:156
dev_attr_store+0x54/0x80 drivers/base/core.c:2366
sysfs_kf_write+0x114/0x170 fs/sysfs/file.c:136
kernfs_fop_write_iter+0x337/0x500 fs/kernfs/file.c:334
call_write_iter include/linux/fs.h:2020 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x96a/0xd80 fs/read_write.c:584
ksys_write+0x122/0x250 fs/read_write.c:637
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
---[ end trace ]---
Fix it by adding a check of string length before using it.
Fixes: f9de11a165 ("bonding: add ip checks when store ip target")
Signed-off-by: Yue Sun <samsun1006219@gmail.com>
Signed-off-by: Simon Horman <horms@kernel.org>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240702-bond-oob-v6-1-2dfdba195c19@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
User could update max_nr_regions parameter while DAMON is running to a
value that smaller than the current number of regions that DAMON is
seeing. Such update could be done for reducing the monitoring overhead.
In the case, DAMON should merge regions aggressively more than normal
situation to ensure the new limit is successfully applied. Implement a
kselftest to ensure that.
Link: https://lkml.kernel.org/r/20240625180538.73134-9-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Users can update DAMON parameters while it is running, using 'commit'
DAMON sysfs interface command. For testing the feature in future tests,
implement a function for doing that on the test-purpose DAMON sysfs
interface wrapper Python module.
Link: https://lkml.kernel.org/r/20240625180538.73134-8-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement a kselftest for DAMON's {min,max}_nr_regions' parameters. The
test ensures both the minimum and the maximum number of regions limit is
respected even if the workload's real number of regions is less than the
minimum or larger than the maximum limits.
Link: https://lkml.kernel.org/r/20240625180538.73134-7-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement DAMON stop function on the test-purpose DAMON sysfs interface
wrapper Python module, _damon_sysfs.py. This feature will be used by
future DAMON tests that need to start/stop DAMON multiple times.
Link: https://lkml.kernel.org/r/20240625180538.73134-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement a test for DAMOS tried regions command of DAMON sysfs interface.
It ensures the expected number of monitoring regions are created using an
artificial memory access pattern generator program.
Link: https://lkml.kernel.org/r/20240625180538.73134-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
To test schemes_tried_regions feature, we need to have a program having
specific number of regions that having different access pattern. Existing
artificial access pattern generator, 'access_memory', cannot be used for
the purpose, since it accesses only one region at a given time. Extending
it could be an option, but since the purpose and the implementation are
pretty simple, implementing another one from the scratch is better.
Implement such another artificial memory access program that allocates
user-defined number/size regions and accesses even-numbered regions.
Link: https://lkml.kernel.org/r/20240625180538.73134-4-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Implement schemes_update_tried_regions DAMON sysfs command on
_damon_sysfs.py, to use on implementations of future tests for the
feature.
Link: https://lkml.kernel.org/r/20240625180538.73134-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/damon: test DAMOS tried regions and
{min,max}_nr_regions".
This patch series fix a minor issue in a program for DAMON selftest, and
implement new functionality selftests for DAMOS tried regions and
{min,max}_nr_regions. The test for max_nr_regions also test the recovery
from online tuning-caused limit violation, which was fixed by a previous
patch [1] titled "mm/damon/core: merge regions aggressively when
max_nr_regions is unmet".
The first patch fixes a minor problem in the articial memory access
pattern generator for tests. Following 3 patches (2-4) implement schemes
tried regions test. Then a couple of patches (5-6) implementing static
setup based {min,max}_nr_regions functionality test follows. Final two
patches (7-8) implement dynamic max_nr_regions update test.
[1] https://lore.kernel.org/20240624210650.53960C2BBFC@smtp.kernel.org
This patch (of 8):
'access_memory' is an artificial memory access pattern generator for DAMON
tests. It creates and accesses memory regions that the user specified the
number and size via the command line. However, real access part of the
program ignores the user-specified size of each region. Instead, it uses
a hard-coded value, 10 MiB. Fix it to use user-defined size.
Note that all existing 'access_memory' users are setting the region size
as 10 MiB. Hence no real problem has happened so far.
Link: https://lkml.kernel.org/r/20240625180538.73134-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240625180538.73134-2-sj@kernel.org
Fixes: b5906f5f73 ("selftests/damon: add a test for update_schemes_tried_regions sysfs command")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Unify all conditions for initial readahead to simplify goto logic in
page_cache_sync_ra(). No functional changes.
Link: https://lkml.kernel.org/r/20240625101909.12234-10-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
try_context_readahead() has a single caller page_cache_sync_ra(). Fold
the function there to make ra state modifications more obvious. No
functional changes.
Link: https://lkml.kernel.org/r/20240625101909.12234-9-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Both async and sync readahead are handled by ondemand_readahead()
function. However there isn't actually much in common. Just move async
related parts into page_cache_ra_async() and sync related parts to
page_cache_ra_sync(). No functional changes.
Link: https://lkml.kernel.org/r/20240625101909.12234-8-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
ondemand_readahead() scales up the readahead window if the current read
would hit the readahead mark placed by itself. However the condition is
mostly dead code because:
a) In case of async readahead we always increase ra->start so ra->start
== index is never true.
b) In case of sync readahead we either go through
try_context_readahead() in which case ra->async_size == 1 < ra->size or
we go through initial_readahead where ra->async_size == ra->size iff
ra->size == max_pages.
So the only practical effect is reducing async_size for large initial
reads. Make the code more obvious.
Link: https://lkml.kernel.org/r/20240625101909.12234-7-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
page_cache_ra_order() scales folio order down so that is fully fits within
readahead window. Thus the code handling the case where we walked past
the readahead window is a dead code. Remove it.
Link: https://lkml.kernel.org/r/20240625101909.12234-6-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The index argument of page_cache_async_readahead() is just folio->index so
there's no point in passing is separately. Drop it.
Link: https://lkml.kernel.org/r/20240625101909.12234-5-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
