Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
The area for register dump is conditionally allocated instead of
ifdef now.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-25-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
This ends up with the allocation of a few additional bytes for the
register dumps even if it's not really used, but the code
simplification should justify the cost.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-24-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
This ends up with the allocation of a few additional bytes for the
register dumps even if it's not really used, but the code
simplification should justify the cost.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-23-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
This ends up with the allocation of a few additional bytes for the
register dumps even if it's not really used, but the code
simplification should justify the cost.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-22-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
This ends up with the allocation of firmware caches if it's not really
used without CONFIG_PM, but the code simplification should justify the
cost.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-21-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
This ends up with the allocation of a few additional bytes for the
register dumps even if it's not really used, but the code
simplification should justify the cost.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-20-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
This ends up with the allocation of a few additional bytes for the
register dumps even if it's not really used, but the code
simplification should justify the cost.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-19-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
This ends up with the allocation of a few additional bytes for the
register dumps even if it's not really used, but the code
simplification should justify the cost.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-18-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
This ends up with the allocation of a few additional bytes for the
image even if it's not really used, but the code-simplification should
justify the cost.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-17-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Instead of allocating the memory with an additional devm_kmalloc(),
just put the image into the existing struct snd_ali. The allocation
size isn't too big, hence it works better with less allocation calls.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-16-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
Just a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-15-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
Just a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-14-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
Just a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-13-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
Just a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-12-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
Just a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-11-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
Just a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-10-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
Just a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
For building properly, add the dummy functions for
snd_ak4531_suspend/resume() functions, too.
Just a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
Just a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
For building properly, add the dummy functions for
snd_sbmixer_suspend/resume() functions, too.
Just a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
Just a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
Just a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
Just a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use the new DEFINE_SIMPLE_DEV_PM_OPS() instead of SIMPLE_DEV_PM_OPS()
for code-simplification. We need no longer CONFIG_PM_SLEEP ifdefs.
Just a cleanup, no functional changes.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20240207155140.18238-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
skip_power_up is used in etm4_init_arch_data when set lpoverride. So
need to set the value of it before calling using it.
Fixes: 5214b56358 ("coresight: etm4x: Add support for sysreg only devices")
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240131105423.9519-1-quic_jinlmao@quicinc.com
Luiz Angelo Daros de Luca says:
====================
net: dsa: realtek: variants to drivers, interfaces to a common module
The current driver consists of two interface modules (SMI and MDIO) and
two family/variant modules (RTL8365MB and RTL8366RB). The SMI and MDIO
modules serve as the platform and MDIO drivers, respectively, calling
functions from the variant modules. In this setup, one interface module
can be loaded independently of the other, but both variants must be
loaded (if not disabled at build time) for any type of interface. This
approach doesn't scale well, especially with the addition of more switch
variants (e.g., RTL8366B), leading to loaded but unused modules.
Additionally, this also seems upside down, as the specific driver code
normally depends on the more generic functions and not the other way
around.
Each variant module was converted into real drivers, serving as both a
platform driver (for switches connected using the SMI interface) and an
MDIO driver (for MDIO-connected switches). The relationship between the
variant and interface modules is reversed, with the variant module now
calling both interface functions (if not disabled at build time). While
in most devices only one interface is likely used, the interface code is
significantly smaller than a variant module, consuming fewer resources
than the previous code. With variant modules now functioning as real
drivers, compatible strings are published only in a single variant
module, preventing conflicts.
The patch series introduces a new common module for functions shared by
both variants. This module also absorbs the two previous interface
modules, as they would always be loaded anyway.
The series relocates the user MII driver from realtek-smi to rtl83xx. It
is now used by MDIO-connected switches instead of the generic DSA
driver. There's a change in how this driver locates the MDIO node. It
now only searches for a child node named "mdio".
The dsa_switch in realtek_priv->ds is now embedded in the struct. It is
always in use and avoids dynamic memory allocation.
Testing has been performed with an RTL8367S (rtl8365mb) using MDIO
interface and an RTL8366RB (rtl8366) with SMI interface.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Embed dsa_switch within realtek_priv to eliminate the need for a second
memory allocation.
Suggested-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The realtek-mdio will now use this driver instead of the generic DSA
driver ("dsa user smi"), which should not be used with OF[1].
With a single ds_ops for both interfaces, the ds_ops in realtek_priv is
no longer necessary. Now, the realtek_variant.ds_ops can be used
directly.
The realtek_priv.setup_interface() has been removed as we can directly
call the new common function.
[1] https://lkml.kernel.org/netdev/20220630200423.tieprdu5fpabflj7@bang-olufsen.dk/T/
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the user MDIO driver, despite numerous references to SMI, including
its compatible string, there's nothing inherently specific about the SMI
interface in the user MDIO bus. Consequently, the code has been migrated
to the rtl83xx module. All references to SMI have been eliminated.
The MDIO bus id was changed from Realtek-<switch id> to the switch
devname suffixed with :user_mii, giving more information about the bus
it is referencing.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the line assigning dev.of_node in mdio_bus as subsequent
of_mdiobus_register will always overwrite it.
As discussed in [1], allow the DSA core to be simplified, by not
assigning ds->user_mii_bus when the MDIO bus is described in OF, as it
is unnecessary.
Since commit 3b73a7b8ec ("net: mdio_bus: add refcounting for fwnodes
to mdiobus"), we can put the "mdio" node just after the MDIO bus
registration.
[1] https://lkml.kernel.org/netdev/20231213120656.x46fyad6ls7sqyzv@skbuf/T/#u
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The binding docs requires for SMI-connected devices that the switch
must have a child node named "mdio" and with a compatible string of
"realtek,smi-mdio". Meanwile, for MDIO-connected switches, the binding
docs only requires a child node named "mdio".
This patch changes the driver to use the common denominator for both
interfaces, looking for the MDIO node by name, ignoring the compatible
string.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since rtl83xx and realtek-{smi,mdio} are always loaded together,
we can optimize resource usage by consolidating them into a single
module.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some code can be shared between both interface modules (MDIO and SMI)
and among variants. These interface functions migrated to a common
module:
- rtl83xx_lock
- rtl83xx_unlock
- rtl83xx_probe
- rtl83xx_register_switch
- rtl83xx_unregister_switch
- rtl83xx_shutdown
- rtl83xx_remove
The reset during probe was moved to the end of the common probe. This way,
we avoid a reset if anything else fails.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Instead of copying values from the variant, we can keep a reference in
realtek_priv.
This is a preliminary change for sharing code betwen interfaces. It will
allow to move most of the probe into a common module while still allow
code specific to each interface to read variant fields.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previously, the interface modules realtek-smi and realtek-mdio served as
a platform and an MDIO driver, respectively. Each interface module
redundantly specified the same compatible strings for both variants and
referenced symbols from the variants.
Now, each variant module has been transformed into a unified driver
serving both as a platform and an MDIO driver. This modification
reverses the relationship between the interface and variant modules,
with the variant module now utilizing symbols from the interface
modules.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create a namespace to group the exported symbols.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
It was never used and never referenced.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Reviewed-by: Alvin Šipraga <alsi@bang-olufsen.dk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure the default return thunk is not used after all return
instructions have been patched by the alternatives because the default
return thunk is insufficient when it comes to mitigating Retbleed or
SRSO.
Fix based on an earlier version by David Kaplan <david.kaplan@amd.com>.
[ bp: Fix the compilation error of warn_thunk_thunk being an invisible
symbol, hoist thunk macro into calling.h ]
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231010171020.462211-4-david.kaplan@amd.com
Link: https://lore.kernel.org/r/20240104132446.GEZZaxnrIgIyat0pqf@fat_crate.local
Omit to create scheduler instances when using the legacy uAPI. When
using the legacy NOUVEAU_GEM_PUSHBUF ioctl no scheduler instance is
required, hence omit creating scheduler instances in
nouveau_abi16_ioctl_channel_alloc().
Tested-by: Timur Tabi <ttabi@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202000606.3526-2-dakr@redhat.com
nouveau_abi16_ioctl_channel_alloc() and nouveau_cli_init() simply call
their corresponding *_fini() counterpart. This can lead to
nouveau_sched_fini() being called without struct nouveau_sched ever
being initialized in the first place.
Instead of embedding struct nouveau_sched into struct nouveau_cli and
struct nouveau_chan_abi16, allocate struct nouveau_sched separately,
such that we can check for the corresponding pointer to be NULL in the
particular *_fini() functions.
It makes sense to allocate struct nouveau_sched separately anyway, since
in a subsequent commit we can also avoid to allocate a struct
nouveau_sched in nouveau_abi16_ioctl_channel_alloc() at all, if the
VM_BIND uAPI has been disabled due to the legacy uAPI being used.
Fixes: 5f03a507b2 ("drm/nouveau: implement 1:1 scheduler - entity relationship")
Reported-by: Timur Tabi <ttabi@nvidia.com>
Tested-by: Timur Tabi <ttabi@nvidia.com>
Closes: https://lore.kernel.org/nouveau/20240131213917.1545604-1-ttabi@nvidia.com/
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240202000606.3526-1-dakr@redhat.com
Add the nodes for CMB subunit MSR(mux select register) support.
CMB MSRs(mux select registers) is to separate mux, arbitration,
interleaving,data packing control from stream filtering control.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-11-git-send-email-quic_taozha@quicinc.com
Add property "qcom,cmb_msr_num" to support CMB MSR(mux select register)
for TPDM. It specifies the number of CMB MSR registers supported by
the TDPM.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-10-git-send-email-quic_taozha@quicinc.com
CMB_TIER register is CMB subunit timestamp insertion enable register.
Bit 0 is PATT_TSENAB bit. Set this bit to 1 to request a timestamp
following a CMB interface pattern match. Bit 1 is XTRIG_TSENAB bit.
Set this bit to 1 to request a timestamp following a CMB CTI timestamp
request. Bit 2 is TS_ALL bit. Set this bit to 1 to request timestamp
for all packets.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-9-git-send-email-quic_taozha@quicinc.com
Timestamps are requested if the monitor’s CMB data set unit input
data matches the value in the Monitor CMB timestamp pattern and mask
registers (M_CMB_TPR and M_CMB_TPMR) when CMB timestamp enabled
via the timestamp insertion enable register bit(CMB_TIER.PATT_TSENAB).
The pattern match trigger output is achieved via setting values into
the CMB trigger pattern and mask registers (CMB_XPR and CMB_XPMR).
After configuring a pattern through these registers, the TPDM subunit
will assert an output trigger every time it receives new input data
that matches the configured pattern value. Values in a given bit
number of the mask register correspond to the same bit number in
the corresponding pattern register.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-8-git-send-email-quic_taozha@quicinc.com
TPDM CMB subunits support two forms of CMB data set element creation:
continuous and trace-on-change collection mode. Continuous change
creates CMB data set elements on every CMBCLK edge. Trace-on-change
creates CMB data set elements only when a new data set element differs
in value from the previous element in a CMB data set. Set CMB_CR.MODE
to 0 for continuous CMB collection mode. Set CMB_CR.MODE to 1 for
trace-on-change CMB collection mode.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-7-git-send-email-quic_taozha@quicinc.com
Read the CMB element size from the device tree. Set the register
bit that controls the CMB element size of the corresponding port.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-6-git-send-email-quic_taozha@quicinc.com
CMB (continuous multi-bit) is one of TPDM's dataset type. CMB subunit
can be enabled for data collection by writing 1 to the first bit of
CMB_CR register. This change is to add enable/disable function for
CMB dataset by writing CMB_CR register.
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Jinlong Mao <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-5-git-send-email-quic_taozha@quicinc.com
Add property "qcom,cmb-elem-bits" to support CMB(Continuous
Multi-Bit) element for TPDM. The associated aggregator will read
this size before it is enabled. CMB element size currently only
supports 8-bit, 32-bit and 64-bit. Because the existing example
tpdm "tpdm@684c000" which only supports dsb sub-unit, I introduce
a new example "tpdm@6c29000" to describe the usage of this new
property.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Mao Jinlong <quic_jinlmao@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-4-git-send-email-quic_taozha@quicinc.com
Since the function tpdm_has_dsb_dataset will be called by TPDA
driver in subsequent patches, it is moved to the header file.
And move this judgement form the function __tpdm_{enable/disable}
to the beginning of the function tpdm_{enable/disable}_dsb.
Signed-off-by: Tao Zhang <quic_taozha@quicinc.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/1707024641-22460-3-git-send-email-quic_taozha@quicinc.com