The field is not part of the structure. Remove the doc.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Those fields have been removed. They do not need to be documented.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The field is gone, remove the documentation for it.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The field is gone, remove the documentation.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Kerneldoc does not seem to understand that embed doc:
drivers/media/i2c/ccs/ccs-quirk.h:50: warning: Excess struct member 'write' description in 'ccs_quirk'
drivers/media/i2c/ccs/ccs-quirk.h:50: warning: Excess struct member 'reg' description in 'ccs_quirk'
drivers/media/i2c/ccs/ccs-quirk.h:50: warning: Excess struct member 'val' description in 'ccs_quirk'
Convert into a standard doc.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The field is gone, remove it.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The fields are gone, remove their documentation.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Named nested unions need their prefix:
https://www.kernel.org/doc/html/latest/doc-guide/kernel-doc.html#nested-structs-unions
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The valid_la is used to check the length requirements,
including special cases of Timer Status. If the length is
shorter than 5, that means no Duration Available is returned,
the message will be forced to be invalid.
However, the description of Duration Available in the spec
is that this parameter may be returned when these cases, or
that it can be optionally return when these cases. The key
words in the spec description are flexible choices.
Remove the special length check of Timer Status to fit the
spec which is not compulsory about that.
Signed-off-by: Nini Song <nini.song@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
VIDIOC_LOG_STATUS will log the controls owned by the driver. But the
code didn't take into account the case where a single driver creates
multiple control handlers. A good example is the vivid driver, but
others use it as well.
Modify v4l2_ctrl_handler_log_status() so that it really shows all
controls owned by this driver.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The last argument of v4l2_ctrl_add_handler() indicates whether the controls
you add are from a control handler owned by another driver (true) or from
the same driver (false). In this case the last argument was incorrectly set
to false. The controls come from the cx25840 subdev.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Static analyzers generate alerts for an unchecked call to
`media_device_register()`. However, in this case, the device will work
reliably without the media controller API.
Add a comment above the call to prevent future unnecessary changes.
Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fixes: 37ecc7b127 ("[media] em28xx: add media controller support")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The documented struct member is called "planes" rather than "vb2_plane".
While at it, make the comments order follow struct members order.
Fixes: 2b14132455 ("media: vb2-core: Improve kernel-doc markups")
Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
ERROR: else should follow close brace '}'
Signed-off-by: Bhavin Sharma <bhavin.sharma@siliconsignals.io>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In xc4000_get_frequency():
*freq = priv->freq_hz + priv->freq_offset;
The code accesses priv->freq_hz and priv->freq_offset without holding any
lock.
In xc4000_set_params():
// Code that updates priv->freq_hz and priv->freq_offset
...
xc4000_get_frequency() and xc4000_set_params() may execute concurrently,
risking inconsistent reads of priv->freq_hz and priv->freq_offset. Since
these related data may update during reading, it can result in incorrect
frequency calculation, leading to atomicity violations.
This possible bug is found by an experimental static analysis tool
developed by our team, BassCheck[1]. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations. The above
possible bug is reported when our tool analyzes the source code of
Linux 6.2.
To address this issue, it is proposed to add a mutex lock pair in
xc4000_get_frequency() to ensure atomicity. With this patch applied, our
tool no longer reports the possible bug, with the kernel configuration
allyesconfig for x86_64. Due to the lack of associated hardware, we cannot
test the patch in runtime testing, and just verify it according to the
code logic.
[1] https://sites.google.com/view/basscheck/
Fixes: 4c07e32884 ("[media] xc4000: Fix get_frequency()")
Cc: stable@vger.kernel.org
Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Gui-Dong Han <2045gemini@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Function hantro_g1_h264_dec_prepare_table() does not exist,
should be replaced with hantro_h264_dec_init().
The register name av1_ulticore_tile_col confused sometimes,
although not be used corrently. The correct name should be
av1_multicore_tile_col.
Signed-off-by: renjun wang <renjunw0@foxmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The struct v4l2_subdev_client_capability was never actually documented,
only the capability flags were documented.
Add this.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
cx23885_vdev_init() can return a NULL pointer, but that pointer
is used in the next line without a check.
Add a NULL pointer check and go to the error unwind if it is NULL.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Sicong Huang <huangsicong@iie.ac.cn>
Following formula of Pll_clk in 5.2 section, 50th page of
TC358746AXBG/748XBG/748IXBG Functional Specification Rev 1.1 document.
The formula of fout is as below:
fout = refclk * mul / (prediv * postdiv)
Remove "p" to avoid using 2 times of prediv in pll calculating function.
Signed-off-by: Duc-Long, Le <duclong.linux@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In kasan_init_region, when k_start is not page aligned, at the begin of
for loop, k_cur = k_start & PAGE_MASK is less than k_start, and then
`va = block + k_cur - k_start` is less than block, the addr va is invalid,
because the memory address space from va to block is not alloced by
memblock_alloc, which will not be reserved by memblock_reserve later, it
will be used by other places.
As a result, memory overwriting occurs.
for example:
int __init __weak kasan_init_region(void *start, size_t size)
{
[...]
/* if say block(dcd97000) k_start(feef7400) k_end(feeff3fe) */
block = memblock_alloc(k_end - k_start, PAGE_SIZE);
[...]
for (k_cur = k_start & PAGE_MASK; k_cur < k_end; k_cur += PAGE_SIZE) {
/* at the begin of for loop
* block(dcd97000) va(dcd96c00) k_cur(feef7000) k_start(feef7400)
* va(dcd96c00) is less than block(dcd97000), va is invalid
*/
void *va = block + k_cur - k_start;
[...]
}
[...]
}
Therefore, page alignment is performed on k_start before
memblock_alloc() to ensure the validity of the VA address.
Fixes: 663c0c9496 ("powerpc/kasan: Fix shadow area set up for modules.")
Signed-off-by: Jiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/1705974359-43790-1-git-send-email-xiaojiangfeng@huawei.com
MMU_FTR_USE_HIGH_BATS is set for G2_LE cores and derivatives like e300cX,
but the high BATs need to be enabled in HID2 to work. Add register
definitions and add the needed setup to __setup_cpu_603.
This fixes boot on CPUs like the MPC5200B with STRICT_KERNEL_RWX enabled
on systems where the flag has not been set by the bootloader already.
Fixes: e4d6654ebe ("powerpc/mm/32s: rework mmu_mapin_ram()")
Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240124103838.43675-1-matthias.schiffer@ew.tq-group.com
Calling get_system_loc_code before checking devfd and errno fails the test
when the device is not available, the expected behaviour is a SKIP.
Change the order of 'SKIP_IF_MSG' to correctly SKIP when the /dev/
papr-vpd device is not available.
Test output before:
Test FAILED on line 271
Test output after:
[SKIP] Test skipped on line 266: /dev/papr-vpd not present
Signed-off-by: R Nageswara Sastry <rnsastry@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240131130859.14968-1-rnsastry@linux.ibm.com
Nysal reported that userspace backtraces are missing in offcputime bcc
tool. As an example:
$ sudo ./bcc/tools/offcputime.py -uU
Tracing off-CPU time (us) of user threads by user stack... Hit Ctrl-C to end.
^C
write
- python (9107)
8
write
- sudo (9105)
9
mmap
- python (9107)
16
clock_nanosleep
- multipathd (697)
3001604
The offcputime bcc tool attaches a bpf program to a kprobe on
finish_task_switch(), which is usually hit on a syscall from userspace.
With the switch to system call vectored, we started setting
pt_regs->link to zero. This is because system call vectored behaves like
a function call with LR pointing to the system call return address, and
with no modification to SRR0/SRR1. The LR value does indicate our next
instruction, so it is being saved as pt_regs->nip, and pt_regs->link is
being set to zero. This is not a problem by itself, but BPF uses perf
callchain infrastructure for capturing stack traces, and that stores LR
as the second entry in the stack trace. perf has code to cope with the
second entry being zero, and skips over it. However, generic userspace
unwinders assume that a zero entry indicates end of the stack trace,
resulting in a truncated userspace stack trace.
Rather than fixing all userspace unwinders to ignore/skip past the
second entry, store the real LR value in pt_regs->link so that there
continues to be a valid, though duplicate entry in the stack trace.
With this change:
$ sudo ./bcc/tools/offcputime.py -uU
Tracing off-CPU time (us) of user threads by user stack... Hit Ctrl-C to end.
^C
write
write
[unknown]
[unknown]
[unknown]
[unknown]
[unknown]
PyObject_VectorcallMethod
[unknown]
[unknown]
PyObject_CallOneArg
PyFile_WriteObject
PyFile_WriteString
[unknown]
[unknown]
PyObject_Vectorcall
_PyEval_EvalFrameDefault
PyEval_EvalCode
[unknown]
[unknown]
[unknown]
_PyRun_SimpleFileObject
_PyRun_AnyFileObject
Py_RunMain
[unknown]
Py_BytesMain
[unknown]
__libc_start_main
- python (1293)
7
write
write
[unknown]
sudo_ev_loop_v1
sudo_ev_dispatch_v1
[unknown]
[unknown]
[unknown]
[unknown]
__libc_start_main
- sudo (1291)
7
syscall
syscall
bpf_open_perf_buffer_opts
[unknown]
[unknown]
[unknown]
[unknown]
_PyObject_MakeTpCall
PyObject_Vectorcall
_PyEval_EvalFrameDefault
PyEval_EvalCode
[unknown]
[unknown]
[unknown]
_PyRun_SimpleFileObject
_PyRun_AnyFileObject
Py_RunMain
[unknown]
Py_BytesMain
[unknown]
__libc_start_main
- python (1293)
11
clock_nanosleep
clock_nanosleep
nanosleep
sleep
[unknown]
[unknown]
__clone
- multipathd (698)
3001661
Fixes: 7fa95f9ada ("powerpc/64s: system call support for scv/rfscv instructions")
Cc: stable@vger.kernel.org
Reported-by: "Nysal Jan K.A" <nysal@linux.ibm.com>
Signed-off-by: Naveen N Rao <naveen@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240202154316.395276-1-naveen@kernel.org
ttm.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZapnVgAKCRDj7w1vZxhR
xStMAQDK8YH1S3cvNO6DEpge7tPc8NoUoDUd+O9ZefhL6+qT7gEAlNWcjSpxqTnX
3NCLJbITAAvG58edL809JeW+JiBEUAA=
=h3CM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCZcDErgAKCRDj7w1vZxhR
xcd2AP4yEGlt0fG5cMzww2Ct2NH7YAan/6o/WTkDTRGt3SoV9QEA6FSVQgXbOOkL
hXh9qKMVar4rpe1D8fCy0RVpjvwF8gA=
=WUjQ
-----END PGP SIGNATURE-----
Merge drm-misc-next-fixes-2024-01-19 into drm-misc-fixes
Merge the last drm-misc-next-fixes tag that fell through the cracks.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Matthieu Baerts says:
====================
mptcp: annotate lockless access
This is a series of 5 patches from Paolo to annotate lockless access.
The MPTCP locking schema is already quite complex. We need to clarify it
and make the lockless access already there consistent, or later changes
will be even harder to follow and understand.
This series goes through all the msk fields accessed in the RX and TX
path and makes the lockless annotation consistent with the in-use
locking schema.
As a bonus, this should fix data races eventually found by fuzzers --
even if we haven't seen many such reports so far.
Patch 1/5 hints we could remove "local_key" and "remote_key" from the
subflow context, and always use the ones from the msk socket, possibly
reducing the context memory usage. That change is left over as a
possible follow-up.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following MPTCP socket fields:
- can_ack
- fully_established
- rcv_data_fin
- snd_data_fin_enable
- rcv_fastclose
- use_64bit_ack
are accessed without any lock, add the appropriate annotation.
The schema is safe as each field can change its value at most
once in the whole mptcp socket life cycle.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The token field is manipulated under the msk socket lock
and accessed lockless in a few spots, add proper ONCE annotation
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following fields:
- ack_seq
- snd_una
- wnd_end
- rmem_fwd_alloc
are protected by the data lock end accessed lockless in a few
spots. Ensure ONCE annotation for write (under such lock) and for
lockless read.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The mptcp-level TX path info (write_seq, bytes_sent, snd_nxt) are under
the msk socket lock protection, and are accessed lockless in a few spots.
Always mark the write operations with WRITE_ONCE, read operations
outside the lock with READ_ONCE and drop the annotation for read
under such lock.
To simplify the annotations move mptcp_pending_data_fin_ack() from
__mptcp_data_acked() to __mptcp_clean_una(), under the msk socket
lock, where such call would belong.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Both the local and the remote key follow the same locking
schema, put in place the proper ONCE accessors.
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This IP block is found in the HDMI subsystem of the i.MX8MP SoC. It has a
full timing generator and can switch between different video sources. On
the i.MX8MP however the only supported source is the LCDIF. The block
just needs to be powered up and told about the polarity of the video
sync signals to act in bypass mode.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Marek Vasut <marex@denx.de>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Richard Leitner <richard.leitner@skidata.com>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20240203165307.7806-9-aford173@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240203165307.7806-9-aford173@gmail.com
Similar chunk of code is used in tsnep_rx_poll_zc() and
tsnep_rx_reopen_xsk() to maintain the RX XDP_RING_NEED_WAKEUP flag.
Consolidate the code to common helper function.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Louis Peens says:
====================
nfp: a few simple driver fixes
This is combining a few unrelated one-liner fixes which have been
floating around internally into a single series. I'm not sure what is
the least amount of overhead for reviewers, this or a separate
submission per-patch? I guess it probably depends on personal
preference, but please let me know if there is a strong preference to
rather split these in the future.
Summary:
Patch1: Fixes an old issue which was hidden because 0 just so happens to
be the correct value.
Patch2: Fixes a corner case for flower offloading with bond ports
Patch3: Re-enables the 'NETDEV_XDP_ACT_REDIRECT', which was accidentally
disabled after a previous refactor.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable previously excluded xdp feature flag for NFD3 devices. This
feature flag is required in order to bind nfp interfaces to an xdp
socket and the nfp driver does in fact support the feature.
Fixes: 66c0e13ad2 ("drivers: net: turn on XDP features")
Cc: stable@vger.kernel.org # 6.3+
Signed-off-by: James Hershaw <james.hershaw@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When physical ports are reset (either through link failure or manually
toggled down and up again) that are slaved to a Linux bond with a tunnel
endpoint IP address on the bond device, not all tunnel packets arriving
on the bond port are decapped as expected.
The bond dev assigns the same MAC address to itself and each of its
slaves. When toggling a slave device, the same MAC address is therefore
offloaded to the NFP multiple times with different indexes.
The issue only occurs when re-adding the shared mac. The
nfp_tunnel_add_shared_mac() function has a conditional check early on
that checks if a mac entry already exists and if that mac entry is
global: (entry && nfp_tunnel_is_mac_idx_global(entry->index)). In the
case of a bonded device (For example br-ex), the mac index is obtained,
and no new index is assigned.
We therefore modify the conditional in nfp_tunnel_add_shared_mac() to
check if the port belongs to the LAG along with the existing checks to
prevent a new global mac index from being re-assigned to the slave port.
Fixes: 20cce88650 ("nfp: flower: enable MAC address sharing for offloadable devs")
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Daniel de Villiers <daniel.devilliers@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 1st and 2nd expansion BAR configuration registers are configured,
when the driver starts up, in variables 'barcfg_msix_general' and
'barcfg_msix_xpb', respectively. The 'LengthSelect' field is ORed in
from bit 0, which is incorrect. The 'LengthSelect' field should
start from bit 27.
This has largely gone un-noticed because
NFP_PCIE_BAR_PCIE2CPP_LengthSelect_32BIT happens to be 0.
Fixes: 4cb584e0ee ("nfp: add CPP access core")
Cc: stable@vger.kernel.org # 4.11+
Signed-off-by: Daniel Basilio <daniel.basilio@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can change sctp_sk() to propagate its argument const qualifier,
thanks to container_of_const().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Xin Long <lucien.xin@gmail.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some GigaDevice ecc_get_status functions use on-stack buffer for
spi_mem_op causes spi_mem_check_op failing, fix the issue by using
spinand scratchbuf.
Fixes: c40c7a990a ("mtd: spinand: Add support for GigaDevice GD5F1GQ4UExxG")
Signed-off-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20231108150701.593912-1-han.xu@nxp.com
The .compat section is a dummy PE section that contains the address of
the 32-bit entrypoint of the 64-bit kernel image if it is bootable from
32-bit firmware (i.e., CONFIG_EFI_MIXED=y)
This section is only 8 bytes in size and is only referenced from the
loader, and so it is placed at the end of the memory view of the image,
to avoid the need for padding it to 4k, which is required for sections
appearing in the middle of the image.
Unfortunately, this violates the PE/COFF spec, and even if most EFI
loaders will work correctly (including the Tianocore reference
implementation), PE loaders do exist that reject such images, on the
basis that both the file and memory views of the file contents should be
described by the section headers in a monotonically increasing manner
without leaving any gaps.
So reorganize the sections to avoid this issue. This results in a slight
padding overhead (< 4k) which can be avoided if desired by disabling
CONFIG_EFI_MIXED (which is only needed in rare cases these days)
Fixes: 3e3eabe26d ("x86/boot: Increase section and file alignment to 4k/512")
Reported-by: Mike Beaton <mjsbeaton@gmail.com>
Link: https://lkml.kernel.org/r/CAHzAAWQ6srV6LVNdmfbJhOwhBw5ZzxxZZ07aHt9oKkfYAdvuQQ%40mail.gmail.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Correct typos of "translated".
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Simon Ser <contact@emersion.fr>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Simon Ser <contact@emersion.fr>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205054101.27929-1-rdunlap@infradead.org
HummingBoard has two RTCs, first integrated within SoC that can be used to
wake up from sleep - and a second on the carrier board including back-up
battery which is intended for keeping time during power-off.
Add aliases for both, ensuring that the battery-backed clock is primary
rtc and used by default during boot for restoring system time.
Fixes keeping time across power-cycle observed on Debian,
which sets RTC_HCTOSYS_DEVICE="rtc0".
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Following change in the I3C bindings, the "master" suffix in I3C
controller node name is discouraged (it is "controller" now) and not
accurate (if device supports also target mode).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Sielaff i.MX6 Solo board is used as controller and user interface
in vending machines. It is based on the i.MX6 Solo SoC and features
the following peripherals and interfaces:
* 512 MB DDR3 RAM
* 512 MB NAND Flash
* 1 MB NOR Flash
* SD card
* Debug LED
* Debug UART
* Key Inputs
* RTC
* RS232
* 100 MBit Ethernet
* USB Hub
* USB OTG
* HDMI
* 7" LVDS IPS panel
* PWM Backlight
* Optional Extension Board with USB Ethernet NIC
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>