The config file contains a partial kernel configuration to be used by
`virtme-configkernel --custom'. The presumption is that the config file
contains all Kconfig options needed by the selftests from the directory.
In net/forwarding/config, many are missing, which manifests as spurious
failures when running the selftests, with messages about unknown device
types, qdisc kinds or classifier actions. Add the missing configurations.
Tested the resulting configuration using virtme-ng as follows:
# vng -b -f tools/testing/selftests/net/forwarding/config
# vng --user root
(within the VM:)
# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
Signed-off-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/025abded7ff9cea5874a7fe35dcd3fd41bf5e6ac.1706286755.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 2d071968a4 ("arm64: compat: Remove 32-bit sigreturn code
from the vDSO") removed all VDSO_* symbols in the compat vDSO. As a
result, vdso32-offsets.h is now empty and therefore unused. Time to
remove it.
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Link: https://lore.kernel.org/r/20240129154748.1727759-1-kevin.brodsky@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Esben Haabendal says:
====================
net: stmmac: dwmac-imx: Time Based Scheduling support
This small patch series allows using TBS support of the i.MX Ethernet QOS
controller for etf qdisc offload.
It achieves this in a similar manner that it is done in dwmac-intel.c,
dwmac-mediatek.c and stmmac_pci.c.
Changes since v1:
- Simplified for loop by starting at index 1.
- Fixed problem with indentation.
====================
Link: https://lore.kernel.org/r/cover.1706256158.git.esben@geanix.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
TSO and TBS cannot coexist. For now we set i.MX Ethernet QOS controller to
use the first TX queue with TSO and the rest for TBS.
TX queues with TBS can support etf qdisc hw offload.
Signed-off-by: Esben Haabendal <esben@geanix.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
With the dma conf being reallocated on each call to stmmac_open(), any
information in there is lost, unless we specifically handle it.
The STMMAC_TBS_EN bit is set when adding an etf qdisc, and the etf qdisc
therefore would stop working when link was set down and then back up.
Fixes: ba39b344e9 ("net: ethernet: stmicro: stmmac: generate stmmac dma conf before open")
Cc: stable@vger.kernel.org
Signed-off-by: Esben Haabendal <esben@geanix.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Full LTO takes the '-mbranch-protection=none' passed to the compiler
when generating the dynamic shadow call stack patching code as a hint to
stop emitting PAC instructions altogether. (Thin LTO appears unaffected
by this)
Work around this by disabling LTO for the compilation unit, which
appears to convince the linker that it should still use PAC in the rest
of the kernel..
Fixes: 3b619e22c4 ("arm64: implement dynamic shadow call stack for Clang")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20240123133052.1417449-6-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
This reverts commit 8c5a19cb17 ("arm64: scs: Work around full LTO
issue with dynamic SCS"), which did not quite fix the issue as intended.
Apparently, -fno-unwind-tables is ignored for the final full LTO link
when it is set on any of the objects, resulting in an early boot crash
due to the SCS patching code patching itself, and attempting to pop the
return address from the shadow stack while the associated push was still
a PACIASP instruction when it executed.
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://lore.kernel.org/r/20240123133052.1417449-5-ardb+git@google.com
Signed-off-by: Will Deacon <will@kernel.org>
On a parisc64 kernel I sometimes notice this kernel warning:
Kernel unaligned access to 0x40ff8814 at ndisc_send_skb+0xc0/0x4d8
The address 0x40ff8814 points to the in6addr_linklocal_allrouters
variable and the warning simply means that some ipv6 function tries to
read a 64-bit word directly from the not-64-bit aligned
in6addr_linklocal_allrouters variable.
Unaligned accesses are non-critical as the architecture or exception
handlers usually will fix it up at runtime. Nevertheless it may trigger
a performance penality for some architectures. For details read the
"unaligned-memory-access" kernel documentation.
The patch below ensures that the ipv6 loopback and router addresses will
always be naturally aligned. This prevents the unaligned accesses for
all architectures.
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 034dfc5df9 ("ipv6: export in6addr_loopback to modules")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/ZbNuFM1bFqoH-UoY@p100
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When setting or getting PHC time, the higher bits of the second time (>32
bits) they were ignored. Meaning that setting some time in the future like
year 2150, it was failing to set this.
The issue can be reproduced like this:
# phc_ctl /dev/ptp1 set 10000000000
phc_ctl[12.290]: set clock time to 10000000000.000000000 or Sat Nov 20 17:46:40 2286
# phc_ctl /dev/ptp1 get
phc_ctl[15.309]: clock time is 1410065411.018055420 or Sun Sep 7 04:50:11 2014
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240126073042.1845153-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Use the inline function reciprocal_scale rather than open coding
the scale optimization. Also, remove unnecessary initializations.
Resulting compiled code is unchanged (according to godbolt).
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20240126002550.169608-1-stephen@networkplumber.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
ice: fix timestamping in reset process
Karol Kolacinski says:
PTP reset process has multiple places where timestamping can end up in
an incorrect state.
This series introduces a proper state machine for PTP and refactors
a large part of the code to ensure that timestamping does not break.
The following are changes since commit 91374ba537:
net: dsa: mt7530: support OF-based registration of switch MDIO bus
and are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue 100GbE
====================
Link: https://lore.kernel.org/r/20240125215757.2601799-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ice driver currently attempts to destroy and re-initialize the Tx
timestamp tracker during the reset flow. The release of the Tx tracker
only happened during CORE reset or GLOBAL reset. The ice_ptp_rebuild()
function always calls the ice_ptp_init_tx function which will allocate
a new tracker data structure, resulting in memory leaks during PF reset.
Certainly the driver should not be allocating a new tracker without
removing the old tracker data, as this results in a memory leak.
Additionally, there's no reason to remove the tracker memory during a
reset. Remove this logic from the reset and rebuild flow. Instead of
releasing the Tx tracker, flush outstanding timestamps just before we
reset the PHY timestamp block in ice_ptp_cfg_phy_interrupt().
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ice_ptp_reset() function uses a goto to skip past clock owner
operations if performing a PF reset or if the device is not the clock
owner. This is a bit confusing. Factor this out into
ice_ptp_rebuild_owner() instead.
The ice_ptp_reset() function is called by ice_rebuild() to restore PTP
functionality after a device reset. Follow the convention set by the
ice_main.c file and rename this function to ice_ptp_rebuild(), in the
same way that we have ice_prepare_for_reset() and
ice_ptp_prepare_for_reset().
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ice_ptp_tx_cfg_intr() function sends a control queue message to
configure the PHY timestamp interrupt block. This is a very similar name
to a function which is used to configure the MAC Other Interrupt Cause
Enable register.
Rename this function to ice_ptp_cfg_phy_interrupt in order to make it
more obvious to the reader what action it performs, and distinguish it
from other similarly named functions.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
E810 hardware does not have a Tx timestamp ready bitmap. Don't check
has_ready_bitmap in E810-specific functions.
Add has_ready_bitmap check in ice_ptp_process_tx_tstamp() to stop
relying on the fact that ice_get_phy_tx_tstamp_ready() returns all 1s.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tx->verify_cached flag is used to inform the Tx timestamp tracking
code whether it needs to verify the cached Tx timestamp value against
a previous captured value. This is necessary on E810 hardware which does
not have a Tx timestamp ready bitmap.
In addition, we currently rely on the fact that the
ice_get_phy_tx_tstamp_ready() function returns all 1s for E810 hardware.
Instead of introducing a brand new flag, rename and verify_cached to
has_ready_bitmap, inverting the relevant checks.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ice_ptp_prepare_for_reset() and ice_ptp_reset() functions currently
check the pf->flags ICE_FLAG_PFR_REQ bit to determine if the current
reset is a PF reset or not.
This is problematic, because it is possible that a PF reset and a higher
level reset (CORE reset, GLOBAL reset, EMP reset) are requested
simultaneously. In that case, the driver performs the highest level
reset requested. However, the ICE_FLAG_PFR_REQ flag will still be set.
The main driver reset functions take an enum ice_reset_req indicating
which reset is actually being performed. Pass this data into the PTP
functions and rely on this instead of relying on the driver flags.
This ensures that the PTP code performs the proper level of reset that
the driver is actually undergoing.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add PTP state machine so that the driver can correctly identify PTP
state around resets.
When the driver got information about ungraceful reset, PTP was not
prepared for reset and it returned error. When this situation occurs,
prepare PTP before rebuilding its structures.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com>
Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I mistakenly turned off CONFIG_XFS_RT in the Kconfig file for arm64
variant of the djwong-wtf git branch. Unfortunately, it took me a good
hour to figure out that RT wasn't built because this is what got printed
to dmesg:
XFS (sda2): realtime geometry sanity check failed
XFS (sda2): Metadata corruption detected at xfs_sb_read_verify+0x170/0x190 [xfs], xfs_sb block 0x0
Whereas I would have expected:
XFS (sda2): Not built with CONFIG_XFS_RT
XFS (sda2): RT mount failed
The root cause of these problems is the conditional compilation of the
new functions xfs_validate_rtextents and xfs_compute_rextslog that I
introduced in the two commits listed below. The !RT versions of these
functions return false and 0, respectively, which causes primary
superblock validation to fail, which explains the first message.
Move the two functions to other parts of libxfs that are not
conditionally defined by CONFIG_XFS_RT and remove the broken stubs so
that validation works again.
Fixes: e14293803f ("xfs: don't allow overly small or large realtime volumes")
Fixes: a6a38f309a ("xfs: make rextslog computation consistent with mkfs")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
This fixes warnings in xe, i915 hwmon docs:
Warning: /sys/devices/.../hwmon/hwmon<i>/curr1_crit is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:35 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:52
Warning: /sys/devices/.../hwmon/hwmon<i>/energy1_input is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:54 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:65
Warning: /sys/devices/.../hwmon/hwmon<i>/in0_input is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:46 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:0
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_crit is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:22 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:39
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_max is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:0 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:8
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_max_interval is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:62 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:30
Warning: /sys/devices/.../hwmon/hwmon<i>/power1_rated_max is defined 2 times: Documentation/ABI/testing/sysfs-driver-intel-xe-hwmon:14 Documentation/ABI/testing/sysfs-driver-intel-i915-hwmon:22
Use a path containing the driver name to differentiate the documentation
of each entry.
Fixes: fb1b70607f ("drm/xe/hwmon: Expose power attributes")
Fixes: 92d44a422d ("drm/xe/hwmon: Expose card reactive critical power")
Fixes: fbcdc9d3bf ("drm/xe/hwmon: Expose input voltage attribute")
Fixes: 71d0a32524 ("drm/xe/hwmon: Expose hwmon energy attribute")
Fixes: 4446fcf220 ("drm/xe/hwmon: Expose power1_max_interval")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/all/20240125113345.291118ff@canb.auug.org.au/
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240127165040.2348009-1-badal.nilawar@intel.com
- Fix register_snapshot_trigger() on allocation error
If the snapshot fails to allocate, the register_snapshot_trigger() can
still return success. If the call to tracing_alloc_snapshot_instance()
returned anything but 0, it returned 0, but it should have been returning
the error code from that allocation function.
- Remove leftover code from tracefs doing a dentry walk on remount.
The update_gid() function was called by the tracefs code on remount
to update the gid of eventfs, but that is no longer the case, but that
code wasn't deleted. Nothing calls it. Remove it.
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCZbcbZBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qqEsAQCWTIQ/yAktP2doLvuccZbZSc5NFHZt
hZNRHep/SMQqKwD6AlesgiXlXM39HiRTiV17jPzrL65brcTEYMJmqCaWugk=
=8nia
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two small fixes for tracefs and eventfs:
- Fix register_snapshot_trigger() on allocation error
If the snapshot fails to allocate, the register_snapshot_trigger()
can still return success. If the call to
tracing_alloc_snapshot_instance() returned anything but 0, it
returned 0, but it should have been returning the error code from
that allocation function.
- Remove leftover code from tracefs doing a dentry walk on remount.
The update_gid() function was called by the tracefs code on remount
to update the gid of eventfs, but that is no longer the case, but
that code wasn't deleted. Nothing calls it. Remove it"
* tag 'trace-v6.8-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracefs: remove stale 'update_gid' code
tracing/trigger: Fix to return error if failed to alloc snapshot
Modern OSes use iptables implementation with nf_tables as a backend,
e.g.:
$ iptables -V
iptables v1.8.8 (nf_tables)
Pablo points out that we need CONFIG_NFT_COMPAT to make that work,
otherwise we see a lot of:
Warning: Extension DNAT revision 0 not supported, missing kernel module?
with DNAT being just an example here, other modules we need
include udp, TTL, length etc.
Link: https://lore.kernel.org/r/20240126201308.2903602-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Mike Christie <michael.christie@oracle.com> says:
The following patches were made over Linus's tree which contains a fix
for sd which was not in Martin's branches.
The patches allow scsi_execute_cmd users to have scsi-ml retry the cmd
for it instead of the caller having to parse the error and loop
itself.
Link: https://lore.kernel.org/r/20240123002220.129141-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add some kunit tests for scsi_check_passthrough() so we can easily make
sure we are hitting the cases for which it's difficult to replicate in
hardware or even scsi_debug.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-20-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has the SCSI midlayer retry errors instead of driving them itself.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-19-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has get_sectorsize() have the SCSI midlayer retry errors instead of
driving them itself.
There is one behavior change where we no longer retry when
scsi_execute_cmd() returns < 0, but we should be ok. We don't need to retry
for failures like the queue being removed, and for the case where there are
no tags/reqs the block layer waits/retries for us. For possible memory
allocation failures from blk_rq_map_kern() we use GFP_NOIO, so retrying
will probably not help.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-18-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has ses have the SCSI midlayer retry scsi_execute_cmd() errors instead
of driving them itself.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-17-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has read_capacity_10() have the SCSI midlayer retry errors instead of
driving them itself.
There are 2 behavior changes with this patch:
1. There is one behavior change where we no longer retry when
scsi_execute_cmd() returns < 0, but we should be ok. We don't need to
retry for failures like the queue being removed, and for the case where
there are no tags/reqs since the block layer waits/retries for us. For
possible memory allocation failures from blk_rq_map_kern() we use
GFP_NOIO, so retrying will probably not help.
2. For the specific UAs we checked for and retried, we would get
READ_CAPACITY_RETRIES_ON_RESET retries plus whatever retries were left
from the main loop's retries. Each UA now gets
READ_CAPACITY_RETRIES_ON_RESET retries, and the other errors get up to
3 retries. This is most likely ok, because
READ_CAPACITY_RETRIES_ON_RESET is already 10 and is not based on
anything specific like a spec or device, so the extra 3 we got from the
main loop was probably just an accident and is not going to help.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-16-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
It's common to get a UA when doing PR commands. It could be due to a target
restarting, transport level relogin or other PR commands like a release
causing it. The upper layers don't get the sense and in some cases have no
idea if it's a SCSI device, so this has the sd layer retry.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-15-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has scsi_report_lun_scan() have the SCSI midlayer retry errors instead
of driving them itself.
There is one behavior change where we no longer retry when
scsi_execute_cmd() returns < 0, but we should be ok. We don't need to retry
for failures like the queue being removed, and for the case where there are
no tags/reqs the block layer waits/retries for us. For possible memory
allocation failures from blk_rq_map_kern() we use GFP_NOIO, so retrying
will probably not help.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-14-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has scsi_mode_sense() have the SCSI midlayer retry UAs instead of
driving them itself.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-13-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has ch_do_scsi() have the SCSI midlayer retry UAs instead of driving
them itself.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-12-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
unit_attention is not used so remove it.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-11-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has sd_sync_cache() have the SCSI midlayer retry errors instead of
driving them itself.
There is one behavior change where we no longer retry when
scsi_execute_cmd() returns < 0, but we should be ok. We don't need to retry
for failures like the queue being removed, and for the case where there are
no tags/reqs the block layer waits/retries for us. For possible memory
allocation failures from blk_rq_map_kern() we use GFP_NOIO, so retrying
will probably not help.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-10-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has spi_execute() have the SCSI midlayer retry UAs instead of driving
them.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-9-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has rdac have the SCSI midlayer retry errors instead of driving them
itself.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-8-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has hp_sw have the SCSI midlayer retry scsi_execute_cmd() errors
instead of driving them itself.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-7-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This simplifies sd_spinup_disk() so the SCSI midlayer retries errors for
it. Note that we retried every UA except Medium Not Present and also if
scsi_status_is_good() returned failed which would happen for all check
conditions. In this patch we use SCMD_FAILURE_STAT_ANY which will trigger
for the same conditions as when scsi_status_is_good() returns false and
there is status. This will cover all CCs including UAs so there is no
explicit failures array entry for UAs except for Medium Not Present which
we don't want to retry.
There is one behavior change where we no longer retry when
scsi_execute_cmd() returns < 0, but we should be ok. We don't need to retry
for failures like the queue being removed, and for the case where there are
no tags/reqs the block layer waits/retries for us. For possible memory
allocation failures from blk_rq_map_kern() we use GFP_NOIO, so retrying
will probably not help.
We do not handle the outside loop's retries because we want to sleep
between tries and we don't support that yet.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-6-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
We currently reuse the cmd buffer for the TUR and START_STOP commands
which requires us to reset the buffer when retrying. This has us use
separate buffers for the 2 commands so we can make them const and I think
it makes it easier to handle for retries but does not add too much extra to
the stack use.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-5-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Description from: Martin Wilck <mwilck@suse.com>:
The SCSI mid layer doesn't retry commands after DID_TIME_OUT (see
scsi_noretry_cmd()). Packet loss in the fabric can cause spurious timeouts
during SCSI device probing, causing device probing to fail. This has been
observed in FCoE uplink failover tests, for example.
This patch fixes the issue by retrying the INQUIRY.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-4-michael.christie@oracle.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin Wilck <mwilck@suse.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This has scsi_probe_lun() ask the SCSI midlayer to retry UAs instead of
driving them itself.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-3-michael.christie@oracle.com
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For passthrough we don't retry any error which we get a check condition
for. This results in a lot of callers driving their own retries for all
UAs, specific UAs, NOT_READY, specific sense values or any type of failure.
This adds the core code to allow passthrough users to specify what errors
they want the SCSI midlayer to retry for them. We can then convert users to
drop a lot of their sense parsing and retry handling.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20240123002220.129141-2-michael.christie@oracle.com
Reviewed-by: John Garry <john.g.garry@oracle.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When working with GPIO, its direction must be set either when the GPIO is
requested by gpiod_get*() or later on by one of the gpiod_direction_*()
functions. Neither of this is done here which results in undefined
behavior on some systems.
As the reset GPIO is used right after it is requested here, it makes sense
to configure it as GPIOD_OUT_HIGH right away. With that, the following
gpiod_set_value_cansleep(1) becomes redundant and can be safely
removed.
Fixes: a653f2f538 ("net: dsa: qca8k: introduce reset via gpio feature")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/1706266175-3408-1-git-send-email-michal.vokac@ysoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For now, the packet with an old ack is not accepted if we are in
FIN_WAIT1 state, which can cause retransmission. Taking the following
case as an example:
Client Server
| |
FIN_WAIT1(Send FIN, seq=10) FIN_WAIT1(Send FIN, seq=20, ack=10)
| |
| Send ACK(seq=21, ack=11)
Recv ACK(seq=21, ack=11)
|
Recv FIN(seq=20, ack=10)
In the case above, simultaneous close is happening, and the FIN and ACK
packet that send from the server is out of order. Then, the FIN will be
dropped by the client, as it has an old ack. Then, the server has to
retransmit the FIN, which can cause delay if the server has set the
SO_LINGER on the socket.
Old ack is accepted in the ESTABLISHED and TIME_WAIT state, and I think
it should be better to keep the same logic.
In this commit, we accept old ack in FIN_WAIT1/FIN_WAIT2/CLOSING/LAST_ACK
states. Maybe we should limit it to FIN_WAIT1 for now?
Signed-off-by: Menglong Dong <menglong8.dong@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240126040519.1846345-1-menglong8.dong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Arınç ÜNAL says:
====================
MT7530 DSA Subdriver Improvements Act I
This patch series simplifies the MT7530 DSA subdriver and improves the
logic of the support for MT7530, MT7531, and the switch on the MT7988 SoC.
I have done a simple ping test to confirm basic communication on all switch
ports on MCM and standalone MT7530, and MT7531 switch with this patch
series applied.
MT7621 Unielec, MCM MT7530:
rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb
gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb
tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000
MT7622 Bananapi, MT7531:
gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb
tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000
MT7623 Bananapi, standalone MT7530:
rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb
gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb
tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000
This patch series is the continuation of the patch series linked below.
https://lore.kernel.org/r/20230522121532.86610-1-arinc.unal@arinc9.com
v2: https://lore.kernel.org/r/20231227044347.107291-1-arinc.unal@arinc9.com
v1: https://lore.kernel.org/r/20231118123205.266819-1-arinc.unal@arinc9.com
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
====================
Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-0-042401f2b279@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>