A pool_workqueue (pwq) represents the connection between a workqueue and a
worker_pool. One of the roles that a pwq plays is enforcement of the
max_active concurrency limit. Before 636b927eba ("workqueue: Make unbound
workqueues to use per-cpu pool_workqueues"), there was one pwq per each CPU
for per-cpu workqueues and per each NUMA node for unbound workqueues, which
was a natural result of per-cpu workqueues being served by per-cpu pools and
unbound by per-NUMA pools.
In terms of max_active enforcement, this was, while not perfect, workable.
For per-cpu workqueues, it was fine. For unbound, it wasn't great in that
NUMA machines would get max_active that's multiplied by the number of nodes
but didn't cause huge problems because NUMA machines are relatively rare and
the node count is usually pretty low.
However, cache layouts are more complex now and sharing a worker pool across
a whole node didn't really work well for unbound workqueues. Thus, a series
of commits culminating on 8639ecebc9 ("workqueue: Make unbound workqueues
to use per-cpu pool_workqueues") implemented more flexible affinity
mechanism for unbound workqueues which enables using e.g. last-level-cache
aligned pools. In the process, 636b927eba ("workqueue: Make unbound
workqueues to use per-cpu pool_workqueues") made unbound workqueues use
per-cpu pwqs like per-cpu workqueues.
While the change was necessary to enable more flexible affinity scopes, this
came with the side effect of blowing up the effective max_active for unbound
workqueues. Before, the effective max_active for unbound workqueues was
multiplied by the number of nodes. After, by the number of CPUs.
636b927eba ("workqueue: Make unbound workqueues to use per-cpu
pool_workqueues") claims that this should generally be okay. It is okay for
users which self-regulates concurrency level which are the vast majority;
however, there are enough use cases which actually depend on max_active to
prevent the level of concurrency from going bonkers including several IO
handling workqueues that can issue a work item for each in-flight IO. With
targeted benchmarks, the misbehavior can easily be exposed as reported in
http://lkml.kernel.org/r/dbu6wiwu3sdhmhikb2w6lns7b27gbobfavhjj57kwi2quafgwl@htjcc5oikcr3.
Unfortunately, there is no way to express what these use cases need using
per-cpu max_active. A CPU may issue most of in-flight IOs, so we don't want
to set max_active too low but as soon as we increase max_active a bit, we
can end up with unreasonable number of in-flight work items when many CPUs
issue IOs at the same time. ie. The acceptable lowest max_active is higher
than the acceptable highest max_active.
Ideally, max_active for an unbound workqueue should be system-wide so that
the users can regulate the total level of concurrency regardless of node and
cache layout. The reasons workqueue hasn't implemented that yet are:
- One max_active enforcement decouples from pool boundaires, chaining
execution after a work item finishes requires inter-pool operations which
would require lock dancing, which is nasty.
- Sharing a single nr_active count across the whole system can be pretty
expensive on NUMA machines.
- Per-pwq enforcement had been more or less okay while we were using
per-node pools.
It looks like we no longer can avoid decoupling max_active enforcement from
pool boundaries. This patch implements system-wide nr_active mechanism with
the following design characteristics:
- To avoid sharing a single counter across multiple nodes, the configured
max_active is split across nodes according to the proportion of each
workqueue's online effective CPUs per node. e.g. A node with twice more
online effective CPUs will get twice higher portion of max_active.
- Workqueue used to be able to process a chain of interdependent work items
which is as long as max_active. We can't do this anymore as max_active is
distributed across the nodes. Instead, a new parameter min_active is
introduced which determines the minimum level of concurrency within a node
regardless of how max_active distribution comes out to be.
It is set to the smaller of max_active and WQ_DFL_MIN_ACTIVE which is 8.
This can lead to higher effective max_weight than configured and also
deadlocks if a workqueue was depending on being able to handle chains of
interdependent work items that are longer than 8.
I believe these should be fine given that the number of CPUs in each NUMA
node is usually higher than 8 and work item chain longer than 8 is pretty
unlikely. However, if these assumptions turn out to be wrong, we'll need
to add an interface to adjust min_active.
- Each unbound wq has an array of struct wq_node_nr_active which tracks
per-node nr_active. When its pwq wants to run a work item, it has to
obtain the matching node's nr_active. If over the node's max_active, the
pwq is queued on wq_node_nr_active->pending_pwqs. As work items finish,
the completion path round-robins the pending pwqs activating the first
inactive work item of each, which involves some pool lock dancing and
kicking other pools. It's not the simplest code but doesn't look too bad.
v4: - wq_adjust_max_active() updated to invoke wq_update_node_max_active().
- wq_adjust_max_active() is now protected by wq->mutex instead of
wq_pool_mutex.
v3: - wq_node_max_active() used to calculate per-node max_active on the fly
based on system-wide CPU online states. Lai pointed out that this can
lead to skewed distributions for workqueues with restricted cpumasks.
Update the max_active distribution to use per-workqueue effective
online CPU counts instead of system-wide and cache the calculation
results in node_nr_active->max.
v2: - wq->min/max_active now uses WRITE/READ_ONCE() as suggested by Lai.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Naohiro Aota <Naohiro.Aota@wdc.com>
Link: http://lkml.kernel.org/r/dbu6wiwu3sdhmhikb2w6lns7b27gbobfavhjj57kwi2quafgwl@htjcc5oikcr3
Fixes: 636b927eba ("workqueue: Make unbound workqueues to use per-cpu pool_workqueues")
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
Currently, for both percpu and unbound workqueues, max_active applies
per-cpu, which is a recent change for unbound workqueues. The change for
unbound workqueues was a significant departure from the previous behavior of
per-node application. It made some use cases create undesirable number of
concurrent work items and left no good way of fixing them. To address the
problem, workqueue is implementing a NUMA node segmented global nr_active
mechanism, which will be explained further in the next patch.
As a preparation, this patch introduces struct wq_node_nr_active. It's a
data structured allocated for each workqueue and NUMA node pair and
currently only tracks the workqueue's number of active work items on the
node. This is split out from the next patch to make it easier to understand
and review.
Note that there is an extra wq_node_nr_active allocated for the invalid node
nr_node_ids which is used to track nr_active for pools which don't have NUMA
node associated such as the default fallback system-wide pool.
This doesn't cause any behavior changes visible to userland yet. The next
patch will expand to implement the control mechanism on top.
v4: - Fixed out-of-bound access when freeing per-cpu workqueues.
v3: - Use flexible array for wq->node_nr_active as suggested by Lai.
v2: - wq->max_active now uses WRITE/READ_ONCE() as suggested by Lai.
- Lai pointed out that pwq_tryinc_nr_active() incorrectly dropped
pwq->max_active check. Restored. As the next patch replaces the
max_active enforcement mechanism, this doesn't change the end result.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
The planned shared nr_active handling for unbound workqueues will make
pwq_dec_nr_active() sometimes drop the pool lock temporarily to acquire
other pool locks, which is necessary as retirement of an nr_active count
from one pool may need kick off an inactive work item in another pool.
This patch moves pwq_dec_nr_in_flight() call in try_to_grab_pending() to the
end of work item handling so that work item state changes stay atomic.
process_one_work() which is the other user of pwq_dec_nr_in_flight() already
calls it at the end of work item handling. Comments are added to both call
sites and pwq_dec_nr_in_flight().
This shouldn't cause any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
wq->cpu_pwq is RCU protected but wq->dfl_pwq isn't. This is okay because
currently wq->dfl_pwq is used only accessed to install it into wq->cpu_pwq
which doesn't require RCU access. However, we want to be able to access
wq->dfl_pwq under RCU in the future to access its __pod_cpumask and the code
can be made easier to read by making the two pwq fields behave in the same
way.
- Make wq->dfl_pwq RCU protected.
- Add unbound_pwq_slot() and unbound_pwq() which can access both ->dfl_pwq
and ->cpu_pwq. The former returns the double pointer that can be used
access and update the pwqs. The latter performs locking check and
dereferences the double pointer.
- pwq accesses and updates are converted to use unbound_pwq[_slot]().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
wq_adjust_max_active() needs to activate work items after max_active is
increased. Previously, it did that by visiting each pwq once activating all
that could be activated. While this makes sense with per-pwq nr_active,
nr_active will be shared across multiple pwqs for unbound wqs. Then, we'd
want to round-robin through pwqs to be fairer.
In preparation, this patch makes wq_adjust_max_active() round-robin pwqs
while activating. While the activation ordering changes, this shouldn't
cause user-noticeable behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
__queue_work(), pwq_dec_nr_in_flight() and wq_adjust_max_active() were
open-coding nr_active handling, which is fine given that the operations are
trivial. However, the planned unbound nr_active update will make them more
complicated, so let's move them into helpers.
- pwq_tryinc_nr_active() is added. It increments nr_active if under
max_active limit and return a boolean indicating whether inc was
successful. Note that the function is structured to accommodate future
changes. __queue_work() is updated to use the new helper.
- pwq_activate_first_inactive() is updated to use pwq_tryinc_nr_active() and
thus no longer assumes that nr_active is under max_active and returns a
boolean to indicate whether a work item has been activated.
- wq_adjust_max_active() no longer tests directly whether a work item can be
activated. Instead, it's updated to use the return value of
pwq_activate_first_inactive() to tell whether a work item has been
activated.
- nr_active decrement and activating the first inactive work item is
factored into pwq_dec_nr_active().
v3: - WARN_ON_ONCE(!WORK_STRUCT_INACTIVE) added to __pwq_activate_work() as
now we're calling the function unconditionally from
pwq_activate_first_inactive().
v2: - wq->max_active now uses WRITE/READ_ONCE() as suggested by Lai.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
To prepare for unbound nr_active handling improvements, move work activation
part of pwq_activate_inactive_work() into __pwq_activate_work() and add
pwq_activate_work() which tests WORK_STRUCT_INACTIVE and updates nr_active.
pwq_activate_first_inactive() and try_to_grab_pending() are updated to use
pwq_activate_work(). The latter conversion is functionally identical. For
the former, this conversion adds an unnecessary WORK_STRUCT_INACTIVE
testing. This is temporary and will be removed by the next patch.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
"!pwq->nr_active && list_empty(&pwq->inactive_works)" test is repeated
multiple times. Let's factor it out into pwq_is_empty().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
max_active is a workqueue-wide setting and the configured value is stored in
wq->saved_max_active; however, the effective value was stored in
pwq->max_active. While this is harmless, it makes max_active update process
more complicated and gets in the way of the planned max_active semantic
updates for unbound workqueues.
This patches moves pwq->max_active to wq->max_active. This simplifies the
code and makes freezing and noop max_active updates cheaper too. No
user-visible behavior change is intended.
As wq->max_active is updated while holding wq mutex but read without any
locking, it now uses WRITE/READ_ONCE(). A new locking locking rule WO is
added for it.
v2: wq->max_active now uses WRITE/READ_ONCE() as suggested by Lai.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
All error handling paths, except this one, go to 'out' where
release_swfw_sync() is called.
This call balances the acquire_swfw_sync() call done at the beginning of
the function.
Branch to the error handling path in order to correctly release some
resources in case of error.
Fixes: ae14a1d8e1 ("ixgbe: Fix IOSF SB access issues")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The e1000e driver supports hardware with a variety of different clock
speeds, and thus a variety of different increment values used for
programming its PTP hardware clock.
The values currently programmed in e1000e_ptp_init are incorrect. In
particular, only two maximum adjustments are used: 24000000 - 1, and
600000000 - 1. These were originally intended to be used with the 96 MHz
clock and the 25 MHz clock.
Both of these values are actually slightly too high. For the 96 MHz clock,
the actual maximum value that can safely be programmed is 23,999,938. For
the 25 MHz clock, the maximum value is 599,999,904.
Worse, several devices use a 24 MHz clock or a 38.4 MHz clock. These parts
are incorrectly assigned one of either the 24million or 600million values.
For the 24 MHz clock, this is not a significant issue: its current
increment value can support an adjustment up to 7billion in the positive
direction. However, the 38.4 KHz clock uses an increment value which can
only support up to 230,769,157 before it starts overflowing.
To understand where these values come from, consider that frequency
adjustments have the form of:
new_incval = base_incval + (base_incval * adjustment) / (unit of adjustment)
The maximum adjustment is reported in terms of parts per billion:
new_incval = base_incval + (base_incval * adjustment) / 1 billion
The largest possible adjustment is thus given by the following:
max_incval = base_incval + (base_incval * max_adj) / 1 billion
Re-arranging to solve for max_adj:
max_adj = (max_incval - base_incval) * 1 billion / base_incval
We also need to ensure that negative adjustments cannot underflow. This can
be achieved simply by ensuring max_adj is always less than 1 billion.
Introduce new macros in e1000.h codifying the maximum adjustment in PPB for
each frequency given its associated increment values. Also clarify where
these values come from by commenting about the above equations.
Replace the switch statement in e1000e_ptp_init with one which mirrors the
increment value switch statement from e1000e_get_base_timinica. For each
device, assign the appropriate maximum adjustment based on its frequency.
Some parts can have one of two frequency modes as determined by
E1000_TSYNCRXCTL_SYSCFI.
Since the new flow directly matches the assignments in
e1000e_get_base_timinca, and uses well defined macro names, it is much
easier to verify that the resulting maximum adjustments are correct. It
also avoids difficult to parse construction such as the "hw->mac.type <
e1000_phc_lpt", and the use of fallthrough which was especially confusing
when combined with a conditional block.
Note that I believe the current increment value configuration used for
24MHz clocks is sub-par, as it leaves at least 3 extra bits available in
the INCVALUE register. However, fixing that requires more careful review of
the clock rate and associated values.
Reported-by: Trey Harrison <harrisondigitalmedia@gmail.com>
Fixes: 68fe1d5da5 ("e1000e: Add Support for 38.4MHZ frequency")
Fixes: d89777bf0e ("e1000e: add support for IEEE-1588 PTP")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.
Add a new compatible string for it.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-3-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
When the H6 was added to the bindings, only the TX DMA channel was
added. As the hardware supports both transmit and receive functions,
the binding is missing the RX DMA channel and is thus incorrect.
Also, the reset control was not made mandatory.
Add the RX DMA channel for SPDIF on H6 by removing the compatible from
the list of compatibles that should only have a TX DMA channel. And add
the H6 compatible to the list of compatibles that require the reset
control to be present.
Fixes: b204530314 ("dt-bindings: sound: sun4i-spdif: Add Allwinner H6 compatible")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-2-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.
Since the driver currently only supports the transmit function, support
for the H616 is identical to what is currently done for the H6.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
If skip_guc_pc is set for a platform, C6 is disabled directly without
acquiring a mem_access reference, triggering an assertion inside
xe_gt_idle_disable_c6.
Fixes: 975e4a3795 ("drm/xe: Manually setup C6 when skip_guc_pc is set")
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240126220613.865939-2-matthew.d.roper@intel.com
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20231206170241.82801-11-ajones@ventanamicro.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20231206170241.82801-10-ajones@ventanamicro.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20231206170241.82801-9-ajones@ventanamicro.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
TEST_* functions append their own newline. Remove newlines from
TEST_* callsites to avoid extra newlines in output.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20231206170241.82801-8-ajones@ventanamicro.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Rework the NX hugepage test's skip message regarding the magic token to
provide all of the necessary magic, and to very explicitly recommended
using the wrapper shell script.
Opportunistically remove an overzealous newline; splitting the
recommendation message across two lines of ~45 characters makes it much
harder to read than running out a single line to 98 characters.
Link: https://lore.kernel.org/r/20231129224042.530798-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Use the recently introduced guard(mutex) infrastructure acquire and
automatically release vendor_module_lock when the guard goes out of scope.
Drop the inner __kvm_x86_vendor_init(), its sole purpose was to simplify
releasing vendor_module_lock in error paths.
No functional change intended.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20231030141728.1406118-1-nik.borisov@suse.com
[sean: rewrite changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
There has been some discussion about what is expected from
a maintainer and so a cleanup seems to be in order. A dedicated
mailing list has been created to discuss brcm80211 specific
development issues. Keeping the status as Supported although
help in maintaining this driver is welcomed.
Cc: brcm80211@lists.linux.dev
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://msgid.link/20240126105724.384063-1-arend.vanspriel@broadcom.com
RMP faults on kernel addresses are fatal and should never happen in
practice. They indicate a bug in the host kernel somewhere. Userspace
RMP faults shouldn't occur either, since even for VMs the memory used
for private pages is handled by guest_memfd and by design is not
mappable by userspace.
Dump RMP table information about the PFN corresponding to the faulting
HVA to help diagnose any issues of this sort when show_fault_oops() is
triggered by an RMP fault.
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-10-michael.roth@amd.com
Bit 31 in the page fault-error bit will be set when processor encounters
an RMP violation.
While at it, use the BIT() macro.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lore.kernel.org/r/20240126041126.1927228-9-michael.roth@amd.com
This information will be useful for debugging things like page faults
due to RMP access violations and RMPUPDATE failures.
[ mdr: move helper to standalone patch, rework dump logic as suggested
by Boris. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-8-michael.roth@amd.com
Add a helper that can be used to access information contained in the RMP
entry corresponding to a particular PFN. This will be needed to make
decisions on how to handle setting up mappings in the NPT in response to
guest page-faults and handling things like cleaning up pages and setting
them back to the default hypervisor-owned state when they are no longer
being used for private data.
[ mdr: separate 'assigned' indicator from return code, and simplify
function signatures for various helpers. ]
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-7-michael.roth@amd.com
The memory integrity guarantees of SEV-SNP are enforced through a new
structure called the Reverse Map Table (RMP). The RMP is a single data
structure shared across the system that contains one entry for every 4K
page of DRAM that may be used by SEV-SNP VMs. The APM Volume 2 section
on Secure Nested Paging (SEV-SNP) details a number of steps needed to
detect/enable SEV-SNP and RMP table support on the host:
- Detect SEV-SNP support based on CPUID bit
- Initialize the RMP table memory reported by the RMP base/end MSR
registers and configure IOMMU to be compatible with RMP access
restrictions
- Set the MtrrFixDramModEn bit in SYSCFG MSR
- Set the SecureNestedPagingEn and VMPLEn bits in the SYSCFG MSR
- Configure IOMMU
RMP table entry format is non-architectural and it can vary by
processor. It is defined by the PPR document for each respective CPU
family. Restrict SNP support to CPU models/families which are compatible
with the current RMP table entry format to guard against any undefined
behavior when running on other system types. Future models/support will
handle this through an architectural mechanism to allow for broader
compatibility.
SNP host code depends on CONFIG_KVM_AMD_SEV config flag which may be
enabled even when CONFIG_AMD_MEM_ENCRYPT isn't set, so update the
SNP-specific IOMMU helpers used here to rely on CONFIG_KVM_AMD_SEV
instead of CONFIG_AMD_MEM_ENCRYPT.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Co-developed-by: Ashish Kalra <ashish.kalra@amd.com>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Link: https://lore.kernel.org/r/20240126041126.1927228-5-michael.roth@amd.com
Currently, the expectation is that the kernel will call
amd_iommu_snp_enable() to perform various checks and set the
amd_iommu_snp_en flag that the IOMMU uses to adjust its setup routines
to account for additional requirements on hosts where SNP is enabled.
This is somewhat fragile as it relies on this call being done prior to
IOMMU setup. It is more robust to just do this automatically as part of
IOMMU initialization, so rework the code accordingly.
There is still a need to export information about whether or not the
IOMMU is configured in a manner compatible with SNP, so relocate the
existing amd_iommu_snp_en flag so it can be used to convey that
information in place of the return code that was previously provided by
calls to amd_iommu_snp_enable().
While here, also adjust the kernel messages related to IOMMU SNP
enablement for consistency/grammar/clarity.
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Co-developed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Joerg Roedel <jroedel@suse.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-4-michael.roth@amd.com
Without SEV-SNP, Automatic IBRS protects only the kernel. But when
SEV-SNP is enabled, the Automatic IBRS protection umbrella widens to all
host-side code, including userspace. This protection comes at a cost:
reduced userspace indirect branch performance.
To avoid this performance loss, don't use Automatic IBRS on SEV-SNP
hosts and all back to retpolines instead.
[ mdr: squash in changes from review discussion. ]
Signed-off-by: Kim Phillips <kim.phillips@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Link: https://lore.kernel.org/r/20240126041126.1927228-3-michael.roth@amd.com
When handling the end of an mmu_notifier invalidation, WARN if
mn_active_invalidate_count is already 0 do not decrement it further, i.e.
avoid causing mn_active_invalidate_count to underflow/wrap. In the worst
case scenario, effectively corrupting mn_active_invalidate_count could
cause kvm_swap_active_memslots() to hang indefinitely.
end() calls are *supposed* to be paired with start(), i.e. underflow can
only happen if there is a bug elsewhere in the kernel, but due to lack of
lockdep assertions in the mmu_notifier helpers, it's all too easy for a
bug to go unnoticed for some time, e.g. see the recently introduced
PAGEMAP_SCAN ioctl().
Ideally, mmu_notifiers would incorporate lockdep assertions, but users of
mmu_notifiers aren't required to hold any one specific lock, i.e. adding
the necessary annotations to make lockdep aware of all locks that are
mutally exclusive with mm_take_all_locks() isn't trivial.
Link: https://lore.kernel.org/all/000000000000f6d051060c6785bc@google.com
Link: https://lore.kernel.org/r/20240110004239.491290-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add CPU feature detection for Secure Encrypted Virtualization with
Secure Nested Paging. This feature adds a strong memory integrity
protection to help prevent malicious hypervisor-based attacks like
data replay, memory re-mapping, and more.
Since enabling the SNP CPU feature imposes a number of additional
requirements on host initialization and handling legacy firmware APIs
for SEV/SEV-ES guests, only introduce the CPU feature bit so that the
relevant handling can be added, but leave it disabled via a
disabled-features mask.
Once all the necessary changes needed to maintain legacy SEV/SEV-ES
support are introduced in subsequent patches, the SNP feature bit will
be unmasked/enabled.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Jarkko Sakkinen <jarkko@profian.com>
Signed-off-by: Ashish Kalra <Ashish.Kalra@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240126041126.1927228-2-michael.roth@amd.com
Commit
cbebd68f59 ("x86/mm: Fix use of uninitialized buffer in sme_enable()")
'fixed' an issue in sme_enable() detected by static analysis, and broke
the common case in the process.
cmdline_find_option() will return < 0 on an error, or when the command
line argument does not appear at all. In this particular case, the
latter is not an error condition, and so the early exit is wrong.
Instead, without mem_encrypt= on the command line, the compile time
default should be honoured, which could be to enable memory encryption,
and this is currently broken.
Fix it by setting sme_me_mask to a preliminary value based on the
compile time default, and only omitting the command line argument test
when cmdline_find_option() returns an error.
[ bp: Drop active_by_default while at it. ]
Fixes: cbebd68f59 ("x86/mm: Fix use of uninitialized buffer in sme_enable()")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240126163918.2908990-2-ardb+git@google.com
When memory encryption is enabled, the kernel prints the encryption
flavor that the system supports.
The check assumes that everything is AMD SME/SEV if it doesn't have
the TDX CPU feature set.
Hyper-V vTOM sets cc_vendor to CC_VENDOR_INTEL when it runs as L2 guest
on top of TDX, but not X86_FEATURE_TDX_GUEST. Hyper-V only needs memory
encryption enabled for I/O without the rest of CoCo enabling.
To avoid confusion, check the cc_vendor directly.
[ bp: Massage commit message. ]
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Jeremi Piotrowski <jpiotrowski@linux.microsoft.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/r/20240124140217.533748-1-kirill.shutemov@linux.intel.com
Compare the opcode bytes at rIP for each #VC exit reason to verify the
instruction which raised the #VC exception is actually the right one.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Link: https://lore.kernel.org/r/20240105101407.11694-1-bp@alien8.de
To pick the changes in these csets:
d8b0f54650 ("wire up syscalls for statmount/listmount")
5f42375904 ("LSM: wireup Linux Security Module syscalls")
Used in some architectures to create syscall tables.
This addresses this perf build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Miklos Szeredi <mszeredi@redhat.com>
Cc: Paul Moore <paul@paul-moore.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZbfMuAlUMRO9Hqa6@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For 64-bit immediate instruction, 'BPF_IMM | BPF_DW | BPF_LD' and
src_reg=[0-6], the current documentation describes the 64-bit
immediate is constructed by:
imm64 = (next_imm << 32) | imm
But actually imm64 is only used when src_reg=0. For all other
variants (src_reg != 0), 'imm' and 'next_imm' have separate special
encoding requirement and imm64 cannot be easily used to describe
instruction semantics.
This patch clarifies that 64-bit immediate instructions use
two 32-bit immediate values instead of a 64-bit immediate value,
so later describing individual 64-bit immediate instructions
becomes less confusing.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Dave Thaler <dthaler1968@gmail.com>
Link: https://lore.kernel.org/bpf/20240127194629.737589-1-yonghong.song@linux.dev
Many devices with a single alternate setting do not have a Valid
Alternate Setting Control and validation performed by
validate_sample_rate_table_v2v3() doesn't work on them and is not
really needed. So check the presense of control before sending
altsetting validation requests.
MOTU Microbook IIc is suffering the most without this check. It
takes up to 40 seconds to bootup due to how slow it switches
sampling rates:
[ 2659.164824] usb 3-2: New USB device found, idVendor=07fd, idProduct=0004, bcdDevice= 0.60
[ 2659.164827] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2659.164829] usb 3-2: Product: MicroBook IIc
[ 2659.164830] usb 3-2: Manufacturer: MOTU
[ 2659.166204] usb 3-2: Found last interface = 3
[ 2679.322298] usb 3-2: No valid sample rate available for 1:1, assuming a firmware bug
[ 2679.322306] usb 3-2: 1:1: add audio endpoint 0x3
[ 2679.322321] usb 3-2: Creating new data endpoint #3
[ 2679.322552] usb 3-2: 1:1 Set sample rate 96000, clock 1
[ 2684.362250] usb 3-2: 2:1: cannot get freq (v2/v3): err -110
[ 2694.444700] usb 3-2: No valid sample rate available for 2:1, assuming a firmware bug
[ 2694.444707] usb 3-2: 2:1: add audio endpoint 0x84
[ 2694.444721] usb 3-2: Creating new data endpoint #84
[ 2699.482103] usb 3-2: 2:1 Set sample rate 96000, clock 1
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Link: https://lore.kernel.org/r/20240129121254.3454481-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
It seems that the field "mod" in struct bpf_trampoline is not used
anywhere after the commit 31bf1dbccf ("bpf: Fix attaching
fentry/fexit/fmod_ret/lsm to modules"). So we can just remove it now.
Fixes: 31bf1dbccf ("bpf: Fix attaching fentry/fexit/fmod_ret/lsm to modules")
Signed-off-by: Menglong Dong <dongmenglong.8@bytedance.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240128055443.413291-1-dongmenglong.8@bytedance.com
Optimize bswap instructions by rev8 Zbb instruction conbined with srli
instruction. And Optimize 16-bit zero-extension with Zbb support.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-7-pulehui@huaweicloud.com
Add 8-bit and 16-bit sign-extention wraper with Zbb support to optimize
sign-extension mov instructions.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-6-pulehui@huaweicloud.com
There are many extension helpers in the current branch instructions, and
the implementation is a bit complicated. We simplify this logic through
two simple extension helpers with alternate register.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-4-pulehui@huaweicloud.com
For code unification, add emit_zextw wrapper to unify all the 32-bit
zero-extension operations.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-3-pulehui@huaweicloud.com
For code unification, add emit_sextw wrapper to unify all the 32-bit
sign-extension operations.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Link: https://lore.kernel.org/bpf/20240115131235.2914289-2-pulehui@huaweicloud.com