Add changes to support safety IRQ handling
support for ethernet.
Signed-off-by: Suraj Jaiswal <quic_jsuraj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240110111649.2256450-3-quic_jsuraj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The TLMM gpio74 is also used to communicate with the secure NFC
on-board module, some variants of the SM8650-MTP board requires
this GPIO to be dedicated to the secure firmware and set reserved
in order to successfully initialize the TLMM GPIOs from HLOS (Linux).
On the other boards this GPIO is unused so it's still safe to mark
the GPIO as reserved.
Fixes: 6fbdb3c1fa ("arm64: dts: qcom: sm8650: add initial SM8650 MTP dts")
Reported-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Tested-by: Georgi Djakov <quic_c_gdjako@quicinc.com>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240111-topic-sm8650-upstream-qrd-fix-gpio-reserved-v1-2-fad39b4c5def@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The TLMM gpio74 is also used to communicate with the secure NFC
on-board module, some variants of the SM8650-QRD board requires
this GPIO to be dedicated to the secure firmware and set reserved
in order to successfully initialize the TLMM GPIOs from HLOS (Linux).
On the other boards this GPIO is unused so it's still safe to mark
the GPIO as reserved.
Fixes: a834911d50 ("arm64: dts: qcom: sm8650: add initial SM8650 QRD dts")
Reported-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Elliot Berman <quic_eberman@quicinc.com>
Link: https://lore.kernel.org/r/20240111-topic-sm8650-upstream-qrd-fix-gpio-reserved-v1-1-fad39b4c5def@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add gcc video axic, axi0 and axi1 resets for the global clock
controller on sm8150.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240111-sm8150-dfs-support-v2-3-6edb44c83d3b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add gcc video axic, axi0 and axi1 resets for the global clock controller
on sm8150.
Signed-off-by: Satya Priya Kakitapalli <quic_skakitap@quicinc.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240111-sm8150-dfs-support-v2-2-6edb44c83d3b@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
- Add detection for AMD's Zen5 generation CPUs and Intel's Clearwater
Forest CPU model number
- Make a stub function export non-GPL because it is part of the
paravirt alternatives and that can be used by non-GPL code
-----BEGIN PGP SIGNATURE-----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=7vE4
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure 32-bit syscall registers are properly sign-extended
- Add detection for AMD's Zen5 generation CPUs and Intel's Clearwater
Forest CPU model number
- Make a stub function export non-GPL because it is part of the
paravirt alternatives and that can be used by non-GPL code
* tag 'x86_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Add more models to X86_FEATURE_ZEN5
x86/entry/ia32: Ensure s32 is sign extended to s64
x86/cpu: Add model number for Intel Clearwater Forest processor
x86/CPU/AMD: Add X86_FEATURE_ZEN5
x86/paravirt: Make BUG_func() usable by non-GPL modules
When CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, the initialization of
reserved pages may cause access of NODE_DATA() with invalid nid and crash.
Add a fall back to early_pfn_to_nid() in memmap_init_reserved_pages() to
ensure a valid node id is always passed to init_reserved_page().
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEeOVYVaWZL5900a/pOQOGJssO/ZEFAmW19ekQHHJwcHRAa2Vy
bmVsLm9yZwAKCRA5A4Ymyw79kQ2CCAC+aXkQdFbP08jyZ1Q3rjZpXMAq6xORVT1z
fWFQQlAQ2L75dWR2dUh+lFPAQRLhs1KfUUmwZUczKhyWXpCFsLLT5OgLtfDLk/sB
XzoyZeW7//pSY22mFxcVmOMuJBZ3q+ZB0n9LdhIaWcdedltvEFhVXZjVPFJszszb
8BZIq7tKvUFUv8KOlfGTvjvNjhjmXRRmcrG1fsS4sdkHQ8/36/KjqI0sZUgMq7Fz
HfawJ6bK+ysHBmKCuWRAU4ssiuUGSaivqh8Azt+FI/zr2Dk+40asFpE0573VMNB7
MaXAn9TjXKU6e/wMBB7KQSUqIlv3Pm7iK2+B/IP4AJ1cWLylRO1r
=efaB
-----END PGP SIGNATURE-----
Merge tag 'fixes-2024-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix crash when reserved memory is not added to memory.
When CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, the initialization
of reserved pages may cause access of NODE_DATA() with invalid nid and
crash.
Add a fall back to early_pfn_to_nid() in memmap_init_reserved_pages()
to ensure a valid node id is always passed to init_reserved_page()"
* tag 'fixes-2024-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix crash when reserved memory is not added to memory
The new modifiers should have added to the end of the enum, so they do
not affect the existing entries.
No modifiers were added since then, so they can be moved safely to the
end of the list.
Move IIO_MOD_LIGHT_UVA and IIO_MOD_LIGHT_UVB to the end of iio_modifier.
Fixes: b89710bd21 ("iio: add modifiers for A and B ultraviolet light")
Suggested-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240127200208.185815-1-javier.carrasco.cruz@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Laptops 103C8C66, 103C8C67, 103C8C68, 103C8C6A use a dual speaker id
system where each speaker has its own speaker id.
The generic configuration table doesn't support this, so it needs its
own function.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240126164005.367021-4-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Current method to set Channel Index when the system is missing _DSD
assumes that the channels alternate, which is not guaranteed.
Instead use the same methodology as the main driver does when _DSD
exists.
Fixes: 8c4c216db8 ("ALSA: hda: cs35l41: Add config table to support many laptops without _DSD")
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240126164005.367021-2-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When a Loongson laptop is equipped with a Radeon GPU, it can be true that
there is no dedicated VRAM soldered on the motherboard. This is probably
for cost reason, but drm/loongson driver is probed because the platform
BIOS (either UEFI or PMON) forget to disable the integrated GPU.
So in the lsdc_get_dedicated_vram() function, we error out if no dedicated
VRAM detected. This fix nothing, but serve as a sanity check only.
Tested-by: Xiaotian Wu <wuxiaotian@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Signed-off-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20240124101607.2910998-1-chenhuacai@loongson.cn
Printing the inventory on a serial console can be quite slow and thus may
trigger the hung task detector (CONFIG_DETECT_HUNG_TASK=y) and possibly
reboot the machine. Adding a cond_resched() prevents this.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v6.0+
Report if the calculated cache stride size is zero, otherwise the cache
flushing routine will never finish and hang the machine.
This can be reproduced with a testcase in qemu, where the firmware reports
wrong cache values.
Signed-off-by: Helge Deller <deller@gmx.de>
The rodata_test program for CONFIG_DEBUG_RODATA_TEST=y complains if
read-only data does not start at page boundary.
Signed-off-by: Helge Deller <deller@gmx.de>
It seems, the only actual mentions of PM2250 can be found are related to
the Qualcomm RB1 platform. However even RB1 schematics use PM4125 as a
PMIC name. Rename PM2250 to PM4125 to follow the documentation.
Fixes: 082f9bc60f ("soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs")
Fixes: 112d96fd29 ("soc: qcom: socinfo: Add some PMICs")
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240128-pm2250-pm4125-rename-v2-1-d51987e9f83a@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add tracepoint for tracing the messages being sent and the success
thereof. This is useful as the system has a variety of clients sending
requests to the always-on subsystem.
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240123-qcom-aoss-tracepoints-v2-1-bd73baa31977@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add SoC Info support for QCM8550 and QCS8550 platform.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20240119100621.11788-4-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the ID for the Qualcomm QCM8550 and QCS8550 SoC, QCS8550 is a QCS
version of QCM8550.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20240119100621.11788-3-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In addition to the normal runtime commands, the Always On Processor
(AOP) provides a number of debug commands which can be used during
system debugging for things such as preventing power collapse or placing
floor votes for certain resources. Some of these are documented in the
Robotics RB5 "Debug AOP ADB" linked below.
Provide a debugfs interface for the developer/tester to send some of
these commands to the AOP, which allow the user to override the DDR
frequency, preventing power collapse of cx and ddr, and prevent AOSS
from going to sleep.
Link: https://docs.qualcomm.com/bundle/publicresource/topics/80-88500-3/85_Debugging_AOP_ADB.html
Signed-off-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Chris Lew <quic_clew@quicinc.com>
Link: https://lore.kernel.org/r/20240117-qcom-aoss-debugfs-v2-v3-1-1aa779124822@quicinc.com
[bjorn: Dropped S_IWGRP from the debugfs files]
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
If there is a problem after resetting a port, the do/while() loop that
checks the default value of DIVLSB register may run forever and spam the
I2C bus.
Add a delay before each read of DIVLSB, and a maximum number of tries to
prevent that situation from happening.
Also fail probe if port reset is unsuccessful.
Fixes: 10d8b34a42 ("serial: max310x: Driver rework")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-5-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some people are seeing a warning similar to this when using a crystal:
max310x 11-006c: clock is not stable yet
The datasheet doesn't mention the maximum time to wait for the clock to be
stable when using a crystal, and it seems that the 10ms delay in the driver
is not always sufficient.
Jan Kundrát reported that it took three tries (each separated by 10ms) to
get a stable clock.
Modify behavior to check stable clock ready bit multiple times (20), and
waiting 10ms between each try.
Note: the first draft of the driver originally used a 50ms delay, without
checking the clock stable bit.
Then a loop with 1000 retries was implemented, each time reading the clock
stable bit.
Fixes: 4cf9a888fd ("serial: max310x: Check the clock readiness")
Cc: stable@vger.kernel.org
Suggested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://www.spinics.net/lists/linux-serial/msg35773.html
Link: https://lore.kernel.org/all/20240110174015.6f20195fde08e5c9e64e5675@hugovil.com/raw
Link: e5dfe3e4a7
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-3-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If regmap_read() returns a non-zero value, the 'val' variable can be left
uninitialized.
Clear it before calling regmap_read() to make sure we properly detect
the clock ready bit.
Fixes: 4cf9a888fd ("serial: max310x: Check the clock readiness")
Cc: stable@vger.kernel.org
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20240116213001.3691629-2-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In uart_tiocmget():
result = uport->mctrl;
uart_port_lock_irq(uport);
result |= uport->ops->get_mctrl(uport);
uart_port_unlock_irq(uport);
...
return result;
In uart_update_mctrl():
uart_port_lock_irqsave(port, &flags);
...
port->mctrl = (old & ~clear) | set;
...
port->ops->set_mctrl(port, port->mctrl);
...
uart_port_unlock_irqrestore(port, flags);
An atomicity violation is identified due to the concurrent execution of
uart_tiocmget() and uart_update_mctrl(). After assigning
result = uport->mctrl, the mctrl value may change in uart_update_mctrl(),
leading to a mismatch between the value returned by
uport->ops->get_mctrl(uport) and the mctrl value previously read.
This can result in uart_tiocmget() returning an incorrect value.
This possible bug is found by an experimental static analysis tool
developed by our team, BassCheck[1]. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations. The above
possible bug is reported when our tool analyzes the source code of
Linux 5.17.
To address this issue, it is suggested to move the line
result = uport->mctrl inside the uart_port_lock block to ensure atomicity
and prevent the mctrl value from being altered during the execution of
uart_tiocmget(). With this patch applied, our tool no longer reports the
bug, with the kernel configuration allyesconfig for x86_64. Due to the
absence of the requisite hardware, we are unable to conduct runtime
testing of the patch. Therefore, our verification is solely based on code
logic analysis.
[1] https://sites.google.com/view/basscheck/
Fixes: c5f4644e6c ("[PATCH] Serial: Adjust serial locking")
Cc: stable@vger.kernel.org
Signed-off-by: Gui-Dong Han <2045gemini@gmail.com>
Link: https://lore.kernel.org/r/20240112113624.17048-1-2045gemini@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These > comparisons should be >= to prevent writing one element beyond
the end of the rx_buff[] array. The rx_buff[] buffer has RX_BUF_SIZE
elements. Fix the buffer overflow.
Fixes: aba8290f36 ("8250: microchip: pci1xxxx: Add Burst mode reception support in uart driver for writing into FIFO")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ZZ7vIfj7Jgh-pJn8@moroto
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add rs485 support to uartps driver. Use either rts-gpios or RTS
to control RS485 phy as driver or a receiver.
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Link: https://lore.kernel.org/r/20240123061655.2150946-4-manikanta.guntupalli@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The current clock input is set to 62.5 MHz for supporting fractional
divider, which enables generation of an acceptable baud rate from any
frequency. With the current clock input the baud rate range is limited
to 3.9 Mbps. Hence, the current range is extended to support 4 Mbps
with Burst mode operation. Divisor calculation for a given baud rate is
updated as the sampling rate is reduced from 16 to 8 for 4 Mbps.
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20240125100619.154873-1-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pci1xxxx_handle_irq reads the burst status and checks if the FIFO
is empty and is ready to accept the incoming data. The handling is
done in pci1xxxx_tx_burst where each transaction processes data in
block of DWORDs, while any remaining bytes are processed individually,
one byte at a time.
Signed-off-by: Rengarajan S <rengarajan.s@microchip.com>
Link: https://lore.kernel.org/r/20240125100006.153342-1-rengarajan.s@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/tty/serial/serial_txx9.c:933:12: error: no previous prototype for ‘early_serial_txx9_setup’ [-Werror=missing-prototypes]
933 | int __init early_serial_txx9_setup(struct uart_port *port)
| ^~~~~~~~~~~~~~~~~~~~~~~
This function is called from arch/mips/txx9/generic/setup.c, and does
have a forward declaration in arch/mips/include/asm/txx9/generic.h.
As the TXX9 serial driver does not support compile-testing, and thus can
only be built on MIPS, fix this by including the MIPS-only header file.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/818be2380061c19fe65819f7b7f10ab6e7aaa082.1706040343.git.geert+renesas@glider.be
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This SoC family was destined for server use, featuring Qualcomm's very
interesting Kryo cores (before "Kryo" became a marketing term for Arm
cores with small modifications). It did however not leave the labs of
Qualcomm and presumably some partners, nor was it ever productized.
Remove the workarounds, as they are long obsolete.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240122-topic-qdf_cleanup_tty-v1-1-0415503184be@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add i.MX95 compatible string. Same as i.MX93, it is compatible
with i.MX8ULP.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240121115301.1420502-1-peng.fan@oss.nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since the driver was introduced the port features flags never extended.
As we don't expect more flags soon that would bypass the first
cacheline of ``struct s3c24xx_uart_info``, change the type of
``has_divslot`` to bool. Bitfields operations incur performance penalty
when set or read as compared to direct types.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-19-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
<linux/serial_s3c.h> provides a clock selection pool of maximum 4 clocks.
Update the driver to consider a pool selection of maximum 8 clocks.
u8 is large enough to allow more clocks than are supported by the driver
now, and not too big to cause spanning of ``struct s3c24xx_uart_info``
through 2 cachelines when compiled for arm64. The goal is to reduce the
memory footprint of ``struct s3c24xx_uart_info``.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-18-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the return type of the s3c24xx_serial_rx_fifocnt() method to
``unsigned int`` as the method only returns the fifo size and does not
handle error codes.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-17-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s3c24xx_serial_console_txrdy() returned just 0 or 1 to indicate whether
the TX is empty or not. Change its return type to bool.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-16-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
s3c24xx_serial_txempty_nofifo() returned either 0 or BIT(2), which is
counterintuitive. Make the method return bool, and return true when TX
is empty and false otherwise.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-15-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The bitwise AND with the fifo mask is used to check if the fifo is empty
or not, it doesn't care about the length, thus the comparison with zero
is implicit. Rely on the implicit comparison instead.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-14-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
``max_count`` negative values are not used. Since ``port->fifosize``
is an unsigned int, make ``max_count`` the same.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-13-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comment brings no benefit as we can already see from the method's
name, ``s3c24xx_serial_pm``, that it deals with power management.
Drop the superfluous comment.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-12-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Move open brace '{' following function definition on the next line.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-11-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Braces {} are not necessary for single statement blocks.
Remove braces on single statement block.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-10-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All registers of the IP have 32 bits. Use u32 variables when reading
or writing from/to the registers. The purpose of those variables becomes
clearer.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://lore.kernel.org/r/20240119104526.1221243-9-tudor.ambarus@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>