The redundant fb helpers .load_lut, .gamma_set and .gamma_get are
no longer used. Remove the dead code and hook up the crtc .gamma_set
to use the crtc gamma_store directly instead of duplicating that
info locally.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170713162538.22788-5-peda@axentia.se
VOP pitch register is word align, need align to word.
VOP_WIN0_VIR:
bit[31:16] win0_vir_stride_uv
Number of words of Win0 uv Virtual width
bit[15:0] win0_vir_width
Number of words of Win0 yrgb Virtual width
ARGB888 : win0_vir_width
RGB888 : (win0_vir_width*3/4) + (win0_vir_width%3)
RGB565 : ceil(win0_vir_width/2)
YUV : ceil(win0_vir_width/4)
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494591-7034-1-git-send-email-mark.yao@rock-chips.com
Iommu would get page fault with following path:
vop_disable:
1, disable all windows and set vop config done
2, vop enter to standy, all windows not works, but their registers
are not clean, when you read window's enable bit, may found the
window is enable.
vop_enable:
1, memcpy(vop->regsbak, vop->regs, len)
save current vop registers to vop->regsbak, then you can found
window is enable on regsbak.
2, VOP_WIN_SET(vop, win, gate, 1);
force enable window gate, but gate and enable are on same
hardware register, then window enable bit rewrite to vop hardware.
3, vop power on, and vop might try to scan destroyed buffer,
then iommu get page fault.
Move windows disable after vop regsbak restore, then vop regsbak mechanism
would keep tracing the modify, everything would be safe.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494582-6934-1-git-send-email-mark.yao@rock-chips.com
VOP pitch register is word align, need align to word.
VOP_WIN0_VIR:
bit[31:16] win0_vir_stride_uv
Number of words of Win0 uv Virtual width
bit[15:0] win0_vir_width
Number of words of Win0 yrgb Virtual width
ARGB888 : win0_vir_width
RGB888 : (win0_vir_width*3/4) + (win0_vir_width%3)
RGB565 : ceil(win0_vir_width/2)
YUV : ceil(win0_vir_width/4)
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494591-7034-1-git-send-email-mark.yao@rock-chips.com
Iommu would get page fault with following path:
vop_disable:
1, disable all windows and set vop config done
2, vop enter to standy, all windows not works, but their registers
are not clean, when you read window's enable bit, may found the
window is enable.
vop_enable:
1, memcpy(vop->regsbak, vop->regs, len)
save current vop registers to vop->regsbak, then you can found
window is enable on regsbak.
2, VOP_WIN_SET(vop, win, gate, 1);
force enable window gate, but gate and enable are on same
hardware register, then window enable bit rewrite to vop hardware.
3, vop power on, and vop might try to scan destroyed buffer,
then iommu get page fault.
Move windows disable after vop regsbak restore, then vop regsbak mechanism
would keep tracing the modify, everything would be safe.
Signed-off-by: Mark Yao <mark.yao@rock-chips.com>
Reviewed-by: Sandy huang <sandy.huang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501494582-6934-1-git-send-email-mark.yao@rock-chips.com
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Just a few small fixes for 4.13.
* 'drm-fixes-4.13' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: Use list_del_init in amdgpu_mn_unregister
drm/amdgpu: Fix undue fallthroughs in golden registers initialization
drm/amdgpu: fix header on gfx9 clear state
rcar-du updates, contains vsp1 updates as well.
* tag 'drm-next-du-20170803' of git://linuxtv.org/pinchartl/media: (24 commits)
drm: rcar-du: Use new iterator macros
drm: rcar-du: Repair vblank for DRM page flips using the VSP
drm: rcar-du: Fix race condition when disabling planes at CRTC stop
drm: rcar-du: Wait for flip completion instead of vblank in commit tail
drm: rcar-du: Use the VBK interrupt for vblank events
drm: rcar-du: Add HDMI outputs to R8A7796 device description
drm: rcar-du: Remove an unneeded NULL check
drm: rcar-du: Setup planes before enabling CRTC to avoid flicker
drm: rcar-du: Configure DPAD0 routing through last group on Gen3
drm: rcar-du: Restrict DPLL duty cycle workaround to H3 ES1.x
drm: rcar-du: Support multiple sources from the same VSP
drm: rcar-du: Fix comments to comply with the kernel coding style
drm: rcar-du: Use of_graph_get_remote_endpoint()
v4l: vsp1: Add support for header display lists in continuous mode
v4l: vsp1: Add support for multiple DRM pipelines
v4l: vsp1: Add support for multiple LIF instances
v4l: vsp1: Add support for new VSP2-BS, VSP2-DL and VSP2-D instances
v4l: vsp1: Add support for the BRS entity
v4l: vsp1: Add pipe index argument to the VSP-DU API
v4l: vsp1: Don't create links for DRM pipeline
...
- Fix a device ID of Hisilicon Hip07/08 in the ACPI APD (AMD SoC)
driver (Hanjun Guo).
- Fix list corruption (introduced during the 4.11 cycle) in the ACPI
LPSS (Intel SoC) driver (Hans de Goede).
- Fix PCC mailbox handling code crash during initialization when
PCCT is not present and PCC channel 0 is requested (Hoan Tran).
- Fix a WDAT watchdog initialization issue causing platform device
creation to fail due to partially overlapping address ranges in
resources (Ryan Kennedy).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=ZD/q
-----END PGP SIGNATURE-----
Merge tag 'acpi-4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These fix two issues in the ACPI SoC drivers (Intel LPSS and AMD APD),
a crash in the PCC mailbox initialization code and a WDAT watchdog
initialization failure.
Specifics:
- Fix a device ID of Hisilicon Hip07/08 in the ACPI APD (AMD SoC)
driver (Hanjun Guo).
- Fix list corruption (introduced during the 4.11 cycle) in the ACPI
LPSS (Intel SoC) driver (Hans de Goede).
- Fix PCC mailbox handling code crash during initialization when PCCT
is not present and PCC channel 0 is requested (Hoan Tran).
- Fix a WDAT watchdog initialization issue causing platform device
creation to fail due to partially overlapping address ranges in
resources (Ryan Kennedy)"
* tag 'acpi-4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: APD: Fix HID for Hisilicon Hip07/08
mailbox: pcc: Fix crash when request PCC channel 0
ACPI / watchdog: Fix init failure with overlapping register regions
ACPI / LPSS: Only call pwm_add_table() for the first PWM controller
- Fix the handling of the scaling_cur_freq cpufreq policy attribute
on x86 systems with the MPERF/APERF registers present to make it
behave more as expected after recent changes (Rafael Wysocki).
- Drop a leftover callback from the intel_pstate driver which also
prevents the cpuinfo_cur_freq cpufreq policy attribute from being
incorrectly exposed when intel_pstate works in the active mode
(Rafael Wysocki).
- Add a missing piece describing the cpuinfo_cur_freq policy
attribute to cpufreq documentation (Rafael Wysocki).
- Fix up a recently added part of the Thunderbolt driver to avoid
aborting system suspends if its mailbox commands time out (Rafael
Wysocki).
- Update device runtime PM framework documentation to reflect the
current behavior of the code (Johan Hovold).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=j2UJ
-----END PGP SIGNATURE-----
Merge tag 'pm-4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix two cpufreq issues, one introduced recently and one related
to recent changes, fix cpufreq documentation, fix up recently added
code in the Thunderbolt driver and update runtime PM framework
documentation.
Specifics:
- Fix the handling of the scaling_cur_freq cpufreq policy attribute
on x86 systems with the MPERF/APERF registers present to make it
behave more as expected after recent changes (Rafael Wysocki).
- Drop a leftover callback from the intel_pstate driver which also
prevents the cpuinfo_cur_freq cpufreq policy attribute from being
incorrectly exposed when intel_pstate works in the active mode
(Rafael Wysocki).
- Add a missing piece describing the cpuinfo_cur_freq policy
attribute to cpufreq documentation (Rafael Wysocki).
- Fix up a recently added part of the Thunderbolt driver to avoid
aborting system suspends if its mailbox commands time out (Rafael
Wysocki).
- Update device runtime PM framework documentation to reflect the
current behavior of the code (Johan Hovold)"
* tag 'pm-4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thunderbolt: icm: Ignore mailbox errors in icm_suspend()
cpufreq: x86: Make scaling_cur_freq behave more as expected
PM / runtime: Document new pm_runtime_set_suspended() constraint
cpufreq: docs: Add missing cpuinfo_cur_freq description
cpufreq: intel_pstate: Drop ->get from intel_pstate structure
This WA is required when decoupled frequencies for slice and unslice
are enabled. This disables DOP clock gating for skl.
v2: enable the WA for all gen9 platforms (not just for SKL GT4 where
the hang issue is originally reported) to avoid rare hangs (David)
v3: as per WaDatabase, enable it only for SKL (Rodrigo)
Cc: David Weinehall <david.weinehall@linux.intel.com>
Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
Signed-off-by: Praveen Paneri <praveen.paneri@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501781530-8186-1-git-send-email-praveen.paneri@intel.com
No functional change.
KBP was based on SPT and spec wasn't clear about the full name.
There was the initial point of the "Point" confusion.
Later the split with Coffee Lake and Cannon Lake both using CNP
and also some uncertainty from the specs we had at that time
made us to propagated the mistake along.
So, let's fix this now and avoid propagating these wrong
"points".
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170731185220.758-1-rodrigo.vivi@intel.com
This adds a new drm_setup_crtcs_fb() function to handle the parts of
drm_setup_crtcs() that touch fb_helper->fb and fb_helper->fbdev. When
drm_setup_crtcs() is called during initialization, these fields are NULL
because they have not been allocated yet.
There is currently a hack at the end of drm_fb_helper_single_fb_probe()
that sets fb_helper->fb, so it is moved to the new drm_setup_crtcs_fb()
function.
This is also done in preparation for addition setup that requires access
to fb_helper->fbdev.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1501777149-8310-2-git-send-email-david@lechnology.com
The motivation behind this new interface is expose at runtime the
creation of new OA configs which can be used as part of the i915 perf
open interface. This will enable the kernel to learn new configs which
may be experimental, or otherwise not part of the core set currently
available through the i915 perf interface.
v2: Drop DRM_ERROR for userspace errors (Matthew)
Add padding to userspace structure (Matthew)
s/guid/uuid/ (Matthew)
v3: Use u32 instead of int to iterate through registers (Matthew)
v4: Lock access to dynamic config list (Lionel)
v5: by Matthew:
Fix uninitialized error values
Fix incorrect unwiding when opening perf stream
Use kmalloc_array() to store register
Use uuid_is_valid() to valid config uuids
Declare ioctls as write only
Check padding members are set to 0
by Lionel:
Return ENOENT rather than EINVAL when trying to remove non
existing config
v6: by Chris:
Use ref counts for OA configs
Store UUID in drm_i915_perf_oa_config rather then using pointer
Shuffle fields of drm_i915_perf_oa_config to avoid padding
v7: by Chris
Rename uapi pointers fields to end with '_ptr'
v8: by Andrzej, Marek, Sebastian
Update register whitelisting
by Lionel
Add more register names for documentation
Allow configuration programming in non-paranoid mode
Add support for value filter for a couple of registers already
programmed in other part of the kernel
v9: Documentation fix (Lionel)
Allow writing WAIT_FOR_RC6_EXIT only on Gen8+ (Andrzej)
v10: Perform read access_ok() on register pointers (Lionel)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Andrzej Datczuk <andrzej.datczuk@intel.com>
Reviewed-by: Andrzej Datczuk <andrzej.datczuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-2-lionel.g.landwerlin@intel.com
In the following commit we'll introduce loadable userspace
configs. This change reworks how configurations are handled in the
perf driver and retains only the test configurations in kernel space.
We now store the test config in dev_priv and resolve the id only once
when opening the perf stream. The OA config is then handled through a
pointer to the structure holding the configuration details.
v2: Rework how test configs are handled (Lionel)
v3: Use u32 to hold number of register (Matthew)
v4: Removed unused dev_priv->perf.oa.current_config variable (Matthew)
v5: Lock device when accessing exclusive_stream (Lionel)
v6: Ensure OACTXCONTROL is always reprogrammed (Lionel)
v7: Switch a couple of index variable from int to u32 (Matthew)
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-3-lionel.g.landwerlin@intel.com
We were reserving fewer dwords in the ring than necessary. Indeed
we're always writing all registers once, so discard the actual number
of registers given by the user and just program the whitelisted ones
once.
Fixes: 19f81df285 ("drm/i915/perf: Add OA unit support for Gen 8+")
Reported-by: Matthew Auld <matthew.william.auld@gmail.com>
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: <stable@vger.kernel.org> # v4.12+
Link: https://patchwork.freedesktop.org/patch/msgid/20170803165812.2373-6-lionel.g.landwerlin@intel.com
Here are some new device ids for v4.13-rc4.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----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=bRO0
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-4.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.13-rc4
Here are some new device ids for v4.13-rc4.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
Felipe writes:
usb: fixes for v4.13-rc4
Another fix for isochronous transfers on dwc3. This time around, we're
making sure that we use correct PIDs in all transfer sizes.
MSM PHY driver got a fix for the use of devm_regulator_bulk_get() API
which will avoid kernel crashes.
Renesas DRD driver got 3 fixes: a fix on giveback, a fix for proper
controller programming and the removal of set-but-never-used variable.
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to use
the new APIs.
Signed-off-by: Cihangir Akturk <cakturk@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1501761585-11757-6-git-send-email-cakturk@gmail.com
drm_plane_helper_funcs and drm_plane_funcsare not supposed to change
at runtime. All functions working with drm_plane_helper_funcs and
drm_plane_funcs work with const. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
6072 596 0 6668 1a0c atmel_hlcdc_plane.o
File size After adding 'const':
text data bss dec hex filename
6218 436 0 6654 19fe atmel_hlcdc_plane.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Link: https://patchwork.freedesktop.org/patch/msgid/646415a3b2e62182f85254115e8491e5caf4b2c7.1499098826.git.arvind.yadav.cs@gmail.com
for_each_obj_in_state is about to be removed, so use the correct new
iterator macros.
Also look at new_plane_state instead of plane->state when looking up
the hw planes in use. They should be the same except when reallocating,
(in which case this code is skipped) and we should really stop looking
at obj->state whenever possible.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
The driver recently switched from handling page flip completion in the
DU vertical blanking handler to the VSP frame end handler to fix a race
condition. This unfortunately resulted in incorrect timestamps in the
vertical blanking events sent to userspace as vertical blanking is now
handled after sending the event.
To fix this we must reverse the order of the two operations. The easiest
way is to handle vertical blanking in the VSP frame end handler before
sending the event. The VSP frame end interrupt occurs approximately 50µs
earlier than the DU frame end interrupt, but this should not cause any
undue harm.
As we need to handle vertical blanking even when page flip completion is
delayed, the VSP driver now needs to call the frame end completion
callback unconditionally, with a new argument to report whether page
flip has completed.
With this new scheme the DU vertical blanking interrupt isn't needed
anymore, so we can stop enabling it.
Fixes: d503a43ac0 ("drm: rcar-du: Register a completion callback with VSP1")
Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
When stopping the CRTC the driver must disable all planes and wait for
the change to take effect at the next vblank. Merely calling
drm_crtc_wait_one_vblank() is not enough, as the function doesn't
include any mechanism to handle the race with vblank interrupts.
Replace the drm_crtc_wait_one_vblank() call with a manual mechanism that
handles the vblank interrupt race.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Page flips can take more than one vertical blanking to complete if
arming the page flips races with the vertical blanking interrupt.
Waiting for one vblank to complete the atomic commit in the commit tail
handler is thus incorrect, and can lead to framebuffers being released
while still being scanned out.
Fix this by waiting for flip completion instead, using the
drm_atomic_helper_wait_for_flip_done() helper.
Fixes: 0d230422d256 ("drm: rcar-du: Register a completion callback with VSP1")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
When implementing support for interlaced modes, the driver switched from
reporting vblank events on the vertical blanking (VBK) interrupt to the
frame end interrupt (FRM). This incorrectly divided the reported refresh
rate by two. Fix it by moving back to the VBK interrupt.
Fixes: 906eff7fca ("drm: rcar-du: Implement support for interlaced modes")
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
"params" can't be NULL here. The next lines assume that we either
hit the break statement of "params->mpixelclock == ~0UL". The
inconsistent NULL checking makes static checkers complain. I've just
removed the test.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>