Commit graph

364,176 commits

Author SHA1 Message Date
Gilad Ben-Yossef
d255b343f5 staging: ccree: add DT bus coherency detection
The ccree driver has build time configurable support
to work on top of coherent (e.g. ACP) vs. none coherent bus
connections. Turn it to run-time configurable option
based on device tree.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-25 16:29:15 +02:00
Gilad Ben-Yossef
675ef02fcb staging: ccree: add clock management support
Some SoC which implement CryptoCell have a dedicated clock
tied to it, some do not. Implement clock support if exists
based on device tree data and tie power management to it.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-25 16:29:15 +02:00
Gilad Ben-Yossef
b091fadb12 staging: ccree: remove unused function
The function set_ack_last was not used anywhere. Remove it.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-25 16:29:15 +02:00
Gilad Ben-Yossef
c51831be99 staging: ccree: register setkey for none hash macs
The original ccree driver was registering a useless setkey
method even for non-MAC hash transformations. Somewhere
around v4.9 a check was added that failed hash operations
if a setkey method was registered but was not called,
so during the initial upstream port code was added to
only register the setkey method for MAC type hash transform.

Unfortunately, the ccree driver also registers non-hash based
MAC transforms and the code had a logic error that stopped
it registering a setkey callback even for those, thus rendering
them useless.

This commit fixes the logic mistake, thus correctly registering
a setkey method only for MAC transformations, leaving it out
for non-MAC ones, whether they are hash based on not.

Fixes: 50cfbbb7e6 ("staging: ccree: add ahash support").

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-25 16:29:15 +02:00
Gilad Ben-Yossef
454527d0d9 staging: ccree: fix hash import/export
Hash import and export was saving and restoring the wrong context
and therefore disabled. Fix it by restoring intermediate digest
and additional state needed.

The hash and mac transform now pass testmgr partial hash tests.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-25 16:29:14 +02:00
Mauro Carvalho Chehab
430e29d9c0 media: dvb-frontends/stv0367: Improve DVB-C/T frontend status
The stv0367 driver provide a lot of status on its state machine.
Change the logic to provide more information about frontend locking
status. Also, while any detailed status isn't available, provide a more
complete FE_STATUS for DVB-T.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
2017-06-25 10:48:45 -03:00
Daniel Scheller
006fe8ee88 media: dvb-frontends/stv0367: DVB-C signal strength statistics
Provide QAM/DVB-C signal strength in decibel scale. Values returned from
stv0367cab_get_rf_lvl() are good but need to be multiplied as they're in
1dBm precision.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-25 09:10:44 -03:00
Daniel Scheller
87b4671074 media: dvb-frontends/stv0367: update UCB readout condition logic
Since the other statistics are read when fe_status conditions are TRUE,
change the ucblocks readout logic to match this aswell.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-25 09:10:06 -03:00
Mauro Carvalho Chehab
f5a1ba833d media: stv0367: prevent division by zero
While there's a test at the SNR calculus to avoid division by
zero, it will still follow the path that would do the division.
So, add a missing break there.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-25 09:07:45 -03:00
Daniel Scheller
d394ad12c2 media: dvb-frontends/stv0367: SNR DVBv5 statistics for DVB-C and T
Add signal-to-noise-ratio as provided by the demodulator in decibel scale.
QAM/DVB-C needs some intlog calculation to have usable dB values, OFDM/
DVB-T values from the demod look alright already and are provided as-is.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-25 09:06:32 -03:00
Daniel Scheller
8982735f8d media: dvb-frontends/cxd2841er: require STATE_ACTIVE_* for agc readout
When the demod driver puts the demod into sleep or shutdown state and it's
status is then polled e.g. via "dvb-fe-tool -m", i2c errors are printed
to the kernel log. If the last delsys was DVB-T/T2:

  cxd2841er: i2c wr failed=-5 addr=6c reg=00 len=1
  cxd2841er: i2c rd failed=-5 addr=6c reg=26

and if it was DVB-C:

  cxd2841er: i2c wr failed=-5 addr=6c reg=00 len=1
  cxd2841er: i2c rd failed=-5 addr=6c reg=49

This happens when read_status unconditionally calls into the
read_signal_strength() function which triggers the read_agc_gain_*()
functions, where these registered are polled.

This isn't a critical thing since when the demod is active again, no more
such errors are logged, however this might make users suspecting defects.

Fix this by requiring STATE_ACTIVE_* in priv->state. If it isn't in any
active state, additionally set the strength scale to NOT_AVAILABLE.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-25 09:05:26 -03:00
Daniel Scheller
456698e93d media: ddbridge: dev_* logging fixup
Fixup

  commit d52786ddd2 ("media: ddbridge: make (ddb)readl in while-loops fail-safe")

after/wrt

  commit 11e358bf37 ("media: ddbridge: use dev_* macros in favor of printk")

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-25 09:04:51 -03:00
Juergen Gross
1a3fc2c402 xen: avoid deadlock in xenbus driver
There has been a report about a deadlock in the xenbus driver:

[  247.979498] ======================================================
[  247.985688] WARNING: possible circular locking dependency detected
[  247.991882] 4.12.0-rc4-00022-gc4b25c0 #575 Not tainted
[  247.997040] ------------------------------------------------------
[  248.003232] xenbus/91 is trying to acquire lock:
[  248.007875]  (&u->msgbuffer_mutex){+.+.+.}, at: [<ffff00000863e904>]
xenbus_dev_queue_reply+0x3c/0x230
[  248.017163]
[  248.017163] but task is already holding lock:
[  248.023096]  (xb_write_mutex){+.+...}, at: [<ffff00000863a940>]
xenbus_thread+0x5f0/0x798
[  248.031267]
[  248.031267] which lock already depends on the new lock.
[  248.031267]
[  248.039615]
[  248.039615] the existing dependency chain (in reverse order) is:
[  248.047176]
[  248.047176] -> #1 (xb_write_mutex){+.+...}:
[  248.052943]        __lock_acquire+0x1728/0x1778
[  248.057498]        lock_acquire+0xc4/0x288
[  248.061630]        __mutex_lock+0x84/0x868
[  248.065755]        mutex_lock_nested+0x3c/0x50
[  248.070227]        xs_send+0x164/0x1f8
[  248.074015]        xenbus_dev_request_and_reply+0x6c/0x88
[  248.079427]        xenbus_file_write+0x260/0x420
[  248.084073]        __vfs_write+0x48/0x138
[  248.088113]        vfs_write+0xa8/0x1b8
[  248.091983]        SyS_write+0x54/0xb0
[  248.095768]        el0_svc_naked+0x24/0x28
[  248.099897]
[  248.099897] -> #0 (&u->msgbuffer_mutex){+.+.+.}:
[  248.106088]        print_circular_bug+0x80/0x2e0
[  248.110730]        __lock_acquire+0x1768/0x1778
[  248.115288]        lock_acquire+0xc4/0x288
[  248.119417]        __mutex_lock+0x84/0x868
[  248.123545]        mutex_lock_nested+0x3c/0x50
[  248.128016]        xenbus_dev_queue_reply+0x3c/0x230
[  248.133005]        xenbus_thread+0x788/0x798
[  248.137306]        kthread+0x110/0x140
[  248.141087]        ret_from_fork+0x10/0x40

It is rather easy to avoid by dropping xb_write_mutex before calling
xenbus_dev_queue_reply().

Fixes: fd8aa9095a ("xen: optimize xenbus
driver for multiple concurrent xenstore accesses").

Cc: <stable@vger.kernel.org> # 4.11
Reported-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2017-06-25 13:11:22 +02:00
Gustavo A. R. Silva
b3d930aaf7 media: i2c: tvp5150: remove useless variable assignment in tvp5150_set_vbi()
Value assigned to variable _type_ at line 678 is overwritten at line 688
before it can be used. This makes such variable assignment useless.

Remove this variable assignment and fix some coding style issues.

Addresses-Coverity-ID: 1226968

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 19:04:46 -03:00
Gustavo A. R. Silva
d83bc7b644 media: dvb-usb-v2: lmedm04: remove unnecessary variable in lme2510_stream_restart()
Remove unnecessary variable _ret_ and refactor the code.

Addresses-Coverity-ID: 1226934

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 18:46:05 -03:00
Marek Vasut
ee0981be77 rtc: ds1307: Add support for Epson RX8130CE
Add support for yet another RTC chip, Epson RX8130CE. This time around,
the chip has slightly permutated registers and also the register starts
at 0x10 instead of 0x0 .

So far, we only support the RTC and NVRAM parts of the chip, Alarm and
Timer is not supported.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24 22:59:38 +02:00
Krzysztof Kozlowski
498bcf3139 rtc: s3c: Handle clock enable failures
clk_enable() can fail so handle such case.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24 22:52:43 +02:00
Krzysztof Kozlowski
9903f68af6 rtc: s3c: Handle clock prepare failures in probe
clk_prepare_enable() can fail so handle such case.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24 22:52:40 +02:00
Krzysztof Kozlowski
6b72086d85 rtc: s3c: Do not remove const from rodata memory
All instances of struct s3c_rtc_data are in fact static const thus
put in rodata so we should not drop the const while getting the pointer
to them.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24 22:52:38 +02:00
Krzysztof Kozlowski
21df6fed0d rtc: s3c: Drop unneeded cast to void pointer
There is no need for casting to void pointer for of_device_id data.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24 22:52:35 +02:00
Krzysztof Kozlowski
fc1afe6053 rtc: s3c: Minor white-space cleanups
Minor cleanups to make the code easier to read. No functional changes.
1. Remove one space before labels as this is nowadays mostly preferred.
2. Fix indentation of arguments in function calls.
3. Split structure member declaration.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24 22:52:34 +02:00
Krzysztof Kozlowski
8768e7b3e3 rtc: s3c: Jump to central exit point on getting src clock error
In other error paths in probe, centralized exit point was used so make
this consistent.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
2017-06-24 22:52:32 +02:00
Daniel Scheller
b138afda3c media: dvb-frontends/stv0367: split SNR determination into functions
The read_snr() functions currently do some magic to return relative scale
values when called. Split out register readouts into separate functions
so the functionality can be reused in some other way.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 17:42:47 -03:00
Daniel Scheller
4043eb2325 media: dvb-frontends/stv0367: initial DDB DVBv5 stats, implement ucblocks
This adds the basics to stv0367ddb_read_status() to be able to properly
provide signal statistics in DVBv5 format. Also adds UCB readout and
provides those values. Also, don't return -EINVAL in ddb_read_status()
if active_demod_state indicates no delivery system.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 17:42:18 -03:00
Daniel Scheller
e1bdf02488 media: dvb-frontends/lnbh25: improve kernellog output
Use dev_dbg() in conjunction with the %*ph format macro to print the vmon
status debug, thus hiding continuous hexdumping from default log levels.
Also, change the attach success log line from error to info severity.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Acked-by: Abylay Ospan <aospan@netup.ru>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 17:05:19 -03:00
Lorenzo Bianconi
add6e6ab3e iio: pressure: st_pressure_core: disable multiread by default for LPS22HB
Set multiread variable to false for LPS22HB pressure sensor since
it is already enabled in CTRL_REG2. Previous configuration does not
cause any issue in I2C communication since SUB Msb has no meaning
whereas it breaks register address in SPI communication

Fixes: e039e2f5b4 (iio:st_pressure:initial lps22hb sensor support)
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi@st.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-24 20:46:25 +01:00
Akinobu Mita
a3507e48d3 iio: light: tsl2563: use correct event code
The TSL2563 driver provides three iio channels, two of which are raw ADC
channels (channel 0 and channel 1) in the device and the remaining one
is calculated by the two.  The ADC channel 0 only supports programmable
interrupt with threshold settings and this driver supports the event but
the generated event code does not contain the corresponding iio channel
type.

This is going to change userspace ABI.  Hopefully fixing this to be
what it should always have been won't break any userspace code.

Cc: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-06-24 20:42:49 +01:00
Binoy Jayan
bd7a85d363 media: ngene: Replace semaphore i2c_switch_mutex with mutex
The semaphore 'i2c_switch_mutex' is used as a simple mutex, so
it should be written as one. Semaphores are going away in the future.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 16:42:34 -03:00
Binoy Jayan
90979f0455 media: ngene: Replace semaphore stream_mutex with mutex
The semaphore 'stream_mutex' is used as a simple mutex, so
it should be written as one. Also moving the mutex_[lock/unlock]
to the caller as it is anyway locked at the beginning of the
callee thus avoiding repetition.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 16:42:00 -03:00
Binoy Jayan
1439cdb031 media: ngene: Replace semaphore cmd_mutex with mutex
The semaphore 'cmd_mutex' is used as a simple mutex, so
it should be written as one. Also, replace down with
mutex_destroy to ensure sane state when ngene_stop is
called.

Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 16:36:40 -03:00
Mauro Carvalho Chehab
f7d84fa704 media: tw5864, fc0011: better handle WARN_ON()
As such macro will check if the expression is true, it may fall through, as
warned:

In file included from ./include/uapi/linux/stddef.h:1:0,
                 from ./include/linux/stddef.h:4,
                 from ./include/uapi/linux/posix_types.h:4,
                 from ./include/uapi/linux/types.h:13,
                 from ./include/linux/types.h:5,
                 from ./drivers/media/dvb-core/dvb_frontend.h:35,
                 from drivers/media/tuners/fc0011.h:4,
                 from drivers/media/tuners/fc0011.c:20:
drivers/media/tuners/fc0011.c: In function 'fc0011_set_params':
./include/linux/compiler.h:179:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
 # define unlikely(x) __builtin_expect(!!(x), 0)
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:109:2: note: in expansion of macro 'unlikely'
  unlikely(__ret_warn_on);     \
  ^~~~~~~~
drivers/media/tuners/fc0011.c:344:3: note: in expansion of macro 'WARN_ON'
   WARN_ON(1);
   ^~~~~~~
drivers/media/tuners/fc0011.c:345:2: note: here
  case 0:
  ^~~~
In file included from ./include/uapi/linux/stddef.h:1:0,
                 from ./include/linux/stddef.h:4,
                 from ./include/uapi/linux/posix_types.h:4,
                 from ./include/uapi/linux/types.h:13,
                 from ./include/linux/types.h:5,
                 from ./include/linux/list.h:4,
                 from ./include/linux/module.h:9,
                 from drivers/media/pci/tw5864/tw5864-video.c:17:
drivers/media/pci/tw5864/tw5864-video.c: In function 'tw5864_fmt_vid_cap':
./include/linux/compiler.h:179:22: warning: this statement may fall through [-Wimplicit-fallthrough=]
 # define unlikely(x) __builtin_expect(!!(x), 0)
                      ^~~~~~~~~~~~~~~~~~~~~~~~~~
./include/asm-generic/bug.h:68:2: note: in expansion of macro 'unlikely'
  unlikely(__ret_warn_on);    \
  ^~~~~~~~
drivers/media/pci/tw5864/tw5864-video.c:547:3: note: in expansion of macro 'WARN_ON_ONCE'
   WARN_ON_ONCE(1);
   ^~~~~~~~~~~~
drivers/media/pci/tw5864/tw5864-video.c:548:2: note: here
  case STD_NTSC:
  ^~~~

On both cases, it means an error, so, let's return an error
code, to make gcc happy.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 16:19:27 -03:00
Martin Kepplinger
e1d00cddfb media: dvb-frontends: drx39xyj: remove obsolete sign extend macros
DRX_S9TOS16 and DRX_S24TODRXFREQ are simply not used. Furthermore,
sign_extend32() should be used for sign extension. (Also, the comment
describing DRX_S24TODRXFREQ was wrong). So remove these macros.

Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 16:01:32 -03:00
Peter Ujfalusi
6a1560ecaa media: v4l: omap_vout: vrfb: Convert to dmaengine
The dmaengine driver for sDMA now have support for interleaved transfer.
This trasnfer type was open coded with the legacy omap-dma API, but now
we can move it to dmaengine.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 16:00:25 -03:00
Mauro Carvalho Chehab
1250a85b1b media: Replace initalized ->initialized
While committing a change on em28xx, I got a warning of a
typo there. So, fix it on em28xx and on two other media drivers
with the same typo.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 15:46:24 -03:00
Mauro Carvalho Chehab
d6a643275a media: em28xx: add support for new of Terratec H6
There's a new version of Terratec H6 with uses USB ID
0ccd:10b2. This version is similar to the old one (with is
supported via the HTC entry), except that this one has the
eeprom on the second bus.

On this board, one side of this board is labeled with:
	dvbc v2.0
The other side with:
	94V-0, MO2, RK-4221 with huge digits: 1107

With those patches, the board is properly detected:

    em28xx 1-1.5:1.0: New device TERRATEC TERRATCE H5 MKII @ 480 Mbps (0ccd:10b2, interface 0, class 0)
    em28xx 1-1.5:1.0: Audio interface 0 found (Vendor Class)
    em28xx 1-1.5:1.0: Video interface 0 found: isoc
    em28xx 1-1.5:1.0: DVB interface 0 found: isoc
    em28xx 1-1.5:1.0: chip ID is em2884
    em28xx eeprom 00000000: 26 00 00 00 02 0b 0f e5 f5 64 01 60 09 e5 f5 64  &........d.`...d
    em28xx eeprom 00000010: 09 60 03 c2 c6 22 e5 f7 b4 03 13 e5 f6 b4 87 03  .`..."..........
    em28xx eeprom 00000020: 02 0a b9 e5 f6 b4 93 03 02 09 46 c2 c6 22 c2 c6  ..........F.."..
    em28xx eeprom 00000030: 22 00 60 00 ef 70 08 85 3d 82 85 3c 83 93 ff ef  ".`..p..=..<....
    em28xx eeprom 00000040: 60 19 85 3d 82 85 3c 83 e4 93 12 07 a3 12 0a fe  `..=..<.........
    em28xx eeprom 00000050: 05 3d e5 3d 70 02 05 3c 1f 80 e4 22 12 0b 06 02  .=.=p..<..."....
    em28xx eeprom 00000060: 07 e2 01 00 1a eb 67 95 cd 0c b2 10 f0 13 6b 03  ......g.......k.
    em28xx eeprom 00000070: 98 22 6a 1c 86 12 27 57 4e 16 29 00 60 00 00 00  ."j...'WN.).`...
    em28xx eeprom 00000080: 02 00 00 00 5e 00 13 00 f0 10 44 82 82 00 00 00  ....^.....D.....
    em28xx eeprom 00000090: 5b 81 c0 00 00 00 20 40 20 80 02 20 10 01 00 00  [..... @ .. ....
    em28xx eeprom 000000a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    em28xx eeprom 000000b0: c6 40 00 00 81 00 00 00 00 00 00 00 00 c4 00 00  .@..............
    em28xx eeprom 000000c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 1c 03  ................
    em28xx eeprom 000000d0: 31 00 32 00 33 00 34 00 35 00 36 00 37 00 38 00  1.2.3.4.5.6.7.8.
    em28xx eeprom 000000e0: 39 00 41 00 42 00 43 00 44 00 12 03 54 00 45 00  9.A.B.C.D...T.E.
    em28xx eeprom 000000f0: 52 00 52 00 41 00 54 00 45 00 43 00 22 03 54 00  R.R.A.T.E.C.".T.
    em28xx 1-1.5:1.0: eeprom 000100: ... (skipped)
    em28xx 1-1.5:1.0: EEPROM ID = 26 00 00 00, EEPROM hash = 0xbcd5a8cf
    em28xx 1-1.5:1.0: EEPROM info:
    em28xx 1-1.5:1.0:	microcode start address = 0x0004, boot configuration = 0x00
    em28xx 1-1.5:1.0:	I2S audio, 5 sample rates
    em28xx 1-1.5:1.0:	500mA max power
    em28xx 1-1.5:1.0:	Table at offset 0x27, strings=0x2298, 0x1c6a, 0x1286
    em28xx 1-1.5:1.0: Identified as Terratec Cinergy H6 rev. 2 (card=101)
    em28xx 1-1.5:1.0: Currently, V4L2 is not supported on this model
    em28xx 1-1.5:1.0: dvb set to isoc mode.
    usbcore: registered new interface driver em28xx
    em28xx 1-1.5:1.0: Binding audio extension
    em28xx 1-1.5:1.0: em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
    em28xx 1-1.5:1.0: em28xx-audio.c: Copyright (C) 2007-2016 Mauro Carvalho Chehab
    em28xx 1-1.5:1.0: Endpoint 0x83 high-speed on intf 0 alt 7 interval = 8, size 196
    em28xx 1-1.5:1.0: Number of URBs: 1, with 64 packets and 192 size
    em28xx 1-1.5:1.0: Audio extension successfully initialized
    em28xx: Registered (Em28xx Audio Extension) extension
    em28xx 1-1.5:1.0: Binding DVB extension
    drxk: status = 0x639260d9
    drxk: detected a drx-3926k, spin A3, xtal 20.250 MHz
    drxk: DRXK driver version 0.9.4300
    drxk: frontend initialized.
    tda18271 4-0060: creating new instance
    tda18271: TDA18271HD/C2 detected @ 4-0060
    dvbdev: DVB: registering new adapter (1-1.5:1.0)
    em28xx 1-1.5:1.0: DVB: registering adapter 0 frontend 0 (DRXK DVB-C DVB-T)...
    dvbdev: dvb_create_media_entity: media entity 'DRXK DVB-C DVB-T' registered.
    dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
    em28xx 1-1.5:1.0: DVB extension successfully initialized
    em28xx: Registered (Em28xx dvb Extension) extension
    em28xx 1-1.5:1.0: Registering input extension
    rc rc0: 1-1.5:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/rc/rc0
    Registered IR keymap rc-nec-terratec-cinergy-xs
    input: 1-1.5:1.0 IR as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.5/1-1.5:1.0/rc/rc0/input0
    em28xx 1-1.5:1.0: Input extension successfully initalized
    em28xx: Registered (Em28xx Input Extension) extension
    tda18271: performing RF tracking filter calibration
    tda18271: RF tracking filter calibration complete

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 15:45:28 -03:00
Mauro Carvalho Chehab
b1e1d4532e media: em28xx: Ignore errors while reading from eeprom
While testing support for Terratec H6 rev. 2, it was noticed
that reading from eeprom there causes a timeout error.

Apparently, this is due to the need of properly setting GPIOs.

In any case, the driver doesn't really require eeprom reading
to succeed, as this is currently used only for debug.

So, Ignore such errors.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Frank Schäfer <fschaefer.oss@googlemail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 15:43:51 -03:00
Dan Carpenter
66083b49bd media: dib0700: fix error handling in dib0700_i2c_xfer_legacy()
Mostly this adds some unlocks to error paths.  But, if you see where
there were "break;" statements before, I changed those paths to return
error codes instead of returning success.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 15:41:57 -03:00
Dan Carpenter
d18a6ef59c media: dib0700: fix locking in dib0700_i2c_xfer_new()
This patch mostly adds unlocks to error paths.  But one additional small
change is that I made the first "break;" a "goto unlock;" which means
that now we return failure instead of success on that path.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 15:38:37 -03:00
Gustavo A. R. Silva
dbe885a5dd media: tuners: mxl5005s: remove useless variable assignments
Values assigned to variables Fmax and Fmin at lines 2740 and 2741 are
overwritten at lines 2754 and 2755 before they can be used. This makes
such variable assignments useless.

Addresses-Coverity-ID: 1226952
Addresses-Coverity-ID: 1226953

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 15:29:33 -03:00
Patrick Venture
44b413661b hwmon: (aspeed-pwm-tacho) Poll with short sleeps.
The reference driver polled but mentioned it was possible to sleep
for a computed period to know when it's ready to read.  However, polling
with minimal sleeps is quick and works.  This also improves responsiveness
from the driver.

Testing: tested on ast2400 on quanta-q71l

Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-24 08:58:06 -07:00
Patrick Venture
ece0c03a9e hwmon: (aspeed-pwm-tacho) reduce fan_tach period
Reduce the fan_tach period such that the fan controller uses a shorter
period to measure the rpm.

The original period of 0x1000 was chosen as a conversative value from the
reference implementation.  Through experimentation on the quanta-q71l
board, I was able to drive the number down which ultimately reduced the
time the controller would use to determine the fan_tach.  This value was
recently tested and accepted downstream on the IBM Zaius board which uses
the ast2500.

Future work: It may be worthwhile as this is a tunable parameter to the
system, to allow overriding it through the device tree.

Testing: Tested on an ast2400 sitting on a quanta-q71l and ast2500 on
power9.

Signed-off-by: Patrick Venture <venture@google.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2017-06-24 08:57:42 -07:00
Daniel Scheller
f9c1e254e1 media: dvb-frontends/stv0367: deduplicate DDB dvb_frontend_ops caps
Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 10:47:18 -03:00
Daniel Scheller
11e358bf37 media: ddbridge: use dev_* macros in favor of printk
Side effect: KERN_DEBUG messages aren't written to the kernel log anymore.
This also improves the tda18212_ping reporting a bit so users know that if
pinging wasn't successful, bad things will happen.

Since in module_init_ddbridge() there's no dev yet, pr_info is used
instead.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 09:41:55 -03:00
Daniel Scheller
d52786ddd2 media: ddbridge: make (ddb)readl in while-loops fail-safe
Reported by smatch:

  drivers/media/pci/ddbridge/ddbridge-core.c:1246 input_tasklet() warn: this loop depends on readl() succeeding
  drivers/media/pci/ddbridge/ddbridge-core.c:1768 flashio() warn: this loop depends on readl() succeeding
  drivers/media/pci/ddbridge/ddbridge-core.c:1788 flashio() warn: this loop depends on readl() succeeding

Fix this by introducing safe_ddbreadl() which will wrap ddbreadl and checks
for all bits set in the return which indicates failure, and return 0 in
that case. Usable as drop-in-replacement in all affected while loops w/o
having to change the logic.

Signed-off-by: Daniel Scheller <d.scheller@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 09:41:30 -03:00
Philipp Zabel
cb778f5c85 media: coda: rename the picture run timeout error handler
I would have liked the the picture run timeout error handler to be renamed to
something a bit more descriptive in the original commit fb2be08f8c ("[media]
coda: first step at error recovery").
Somehow v1 [1] was merged instead of v2 [2].

[1] https://patchwork.kernel.org/patch/9663965/
[2] https://patchwork.kernel.org/patch/9774239/

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 09:39:29 -03:00
Colin Ian King
bc8e2d627a media: venus: fix loop wrap in cleanup of clks
The current pre-decrement is incorrect and should be replaced
with a post-decrement. Consider the case where the very first
clk_prepare_enable fails when i is 0; in this case the error
clean up will decrement the unsigned int which wraps to the
largest unsigned int value causing an array out of bounds read
on core->clks[i].

Detected by CoverityScan, CID#1446590 ("Out-of-bounds read")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 09:38:53 -03:00
Gustavo A. R. Silva
13c2bede49 media: radio: wl1273: add check on core->write() return value
Check return value from call to core->write(), so in case of
error print error message, jump to goto label fail and eventually
return.

Addresses-Coverity-ID: 1226943

Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 09:38:14 -03:00
Arnd Bergmann
0a0c1b823c media: rainshadow-cec: avoid -Wmaybe-uninitialized warning again
Back in April I created a patch to address a false-positive warning:

drivers/media/usb/rainshadow-cec/rainshadow-cec.c: In function 'rain_irq_work_handler':
drivers/media/usb/rainshadow-cec/rainshadow-cec.c:171:31: error: 'data' may be used uninitialized in this function [-Werror=maybe-uninitialized]

My patch was totally wrong and introduced a real bug, and Colin Ian King thankfully
noticed it now and fixed my mistake. Unfortunately, fixing the actual uninitialized
data in this case brought back the original bogus warning.

This is a new version of the patch, which simplifies the code to the point where
gcc notices the behavior is correct.

Fixes: ca33784ba4 ("[media] rainshadow-cec: ensure exit_loop is intialized")
Fixes: ea6a69defd ("[media] rainshadow-cec: avoid -Wmaybe-uninitialized warning")

Cc: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 09:37:28 -03:00
Joe Perches
7ee88f8c6b media: tuner-core: Remove unused #define PREFIX
Commit 680d87c0a9 ("[media] tuner-core: use pr_foo, instead of
internal printk macros") removed the use of PREFIX, remove the #define

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 09:37:01 -03:00
Joe Perches
f1bd9bd69b media: stkwebcam: Use more common logging styles
Convert STK_<LEVEL> to pr_<level> to use the typical kernel logging.
Add a define for pr_fmt.  No change in logging output.

Miscellanea:

o Remove now unused PREFIX and STK_<LEVEL> macros
o Realign arguments
o Use pr_<level>_ratelimited
o Add a few missing newlines to formats

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-06-24 09:36:38 -03:00