'struct objtool_file' is specific to the check code and doesn't belong
in the elf code which is supposed to be objtool_file-agnostic. Convert
the elf iterator macros to use 'struct elf' instead.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
The .parainstructions section no longer exists since the following
commit:
60bc276b12 ("x86/paravirt: Switch mixed paravirt/alternative calls to alternatives").
Remove the reference to it.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
KBUILD_HOSTCFLAGS and KBUILD_HOSTLDFLAGS aren't defined when objtool is
built standalone. Also, the EXTRA_WARNINGS flags are rather arbitrary.
Make things simpler and more consistent by specifying compiler flags
explicitly and tweaking the warnings. Also make a few code tweaks to
make the new warnings happy.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Use 'const char *' where applicable.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Add a sanity check to make sure none of the relocations for the
.discard.annotate_insn section have gone missing.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Due to the short circuiting logic in next_insn_to_validate(), control
flow may silently transition from .altinstr_replacement to .text without
a corresponding nested call to validate_branch().
As a result the validate_branch() 'sec' variable doesn't get
reinitialized, which can trigger a confusing "unexpected end of section"
warning which blames .altinstr_replacement rather than the offending
fallthrough function.
Fix that by not caching the section. There's no point in doing that
anyway.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
__pa_symbol() generates a relocation which refers to a physical address.
Convert it to back its virtual form before calculating the addend.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
On x86, arch_dest_reloc_offset() hardcodes the addend adjustment to
four, but the actual adjustment depends on the relocation type. Fix
that.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
find_symbol_hole_containing() fails to find a symbol hole (aka stripped
weak symbol) if its section has no symbols before the hole. This breaks
weak symbol detection if -ffunction-sections is enabled.
Fix that by allowing the interval tree to contain section symbols, which
are always at offset zero for a given section.
Fixes a bunch of (-ffunction-sections) warnings like:
vmlinux.o: warning: objtool: .text.__x64_sys_io_setup+0x10: unreachable instruction
Fixes: 4adb236867 ("objtool: Ignore extra-symbol code")
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Zero-length symbols get inserted in the wrong spot. Fix that.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
The following commit
5da6aea375 ("objtool: Fix find_{symbol,func}_containing()")
fixed the issue where overlapping symbols weren't getting sorted
properly in the symbol tree. Therefore the workaround to skip adding
empty symbols from the following commit
a2e38dffcd ("objtool: Don't add empty symbols to the rbtree")
is no longer needed.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Up to a certain point in objtool's execution, all errors are fatal and
return -1. When propagating such errors, just return -1 directly
instead of trying to propagate the original return code. This helps
make the code more compact and the behavior more explicit.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Properly check and propagate the return value of elf_truncate_section()
to avoid silent failures.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
The free(sym) call in the read_symbols() error path is fundamentally
broken: 'sym' doesn't point to any allocated block. If triggered,
things would go from bad to worse.
Remove the free() and simplify the error paths. Freeing memory isn't
necessary here anyway, these are fatal errors which lead to an immediate
exit().
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
In the rare case of overlapping symbols, find_symbol_containing() just
returns the first one it finds. Make it slightly less arbitrary by
returning the smallest symbol with size > 0.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
For consistency with the other function templates, change
_subtree_search_*() to use the user-supplied ITSTATIC rather than the
hard-coded 'static'.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
The following commit made an improvement to interval_tree_generic.h, but
didn't sync it to the tools copy:
1981128578 ("lib/interval_tree: skip the check before go to the right subtree")
Sync it, and add it to objtool's sync-check.sh so they are more likely
to stay in sync going forward.
Acked-by: Petr Mladek <pmladek@suse.com>
Tested-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
The objtool command line 'objtool --hacks=jump_label foo.o' on its own
should be expected to rewrite jump labels to NOPs. This means the
add_special_section_alts() code path needs to run when only this option
is provided.
This is mainly relevant in certain debugging situations, but could
potentially also fix kernel builds in which objtool is run with
--hacks=jump_label but without --orc, --stackval, --uaccess, or
--hacks=noinstr.
Fixes: de6fbcedf5 ("objtool: Read special sections with alts only when specific options are selected")
Signed-off-by: Dylan Hatch <dylanbhatch@google.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
The tools version of fixdep has broken dependencies. It doesn't get
rebuilt if the host compiler or headers change.
Build fixdep with the tools kbuild infrastructure, so fixdep runs on
itself. Due to the recursive dependency, its dependency file is
incomplete the very first time it gets built. In that case build it a
second time to achieve fixdep inception.
Reported-by: Arthur Marsh <arthur.marsh@internode.on.net>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Remove unnecessary semicolons reported by Coccinelle/coccicheck and the
semantic patch at scripts/coccinelle/misc/semicolon.cocci.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled kernels
in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
-----BEGIN PGP SIGNATURE-----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=3Otb
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull more x86 updates from Borislav Petkov:
- Remove a bunch of asm implementing condition flags testing in KVM's
emulator in favor of int3_emulate_jcc() which is written in C
- Replace KVM fastops with C-based stubs which avoids problems with the
fastop infra related to latter not adhering to the C ABI due to their
special calling convention and, more importantly, bypassing compiler
control-flow integrity checking because they're written in asm
- Remove wrongly used static branches and other ugliness accumulated
over time in hyperv's hypercall implementation with a proper static
function call to the correct hypervisor call variant
- Add some fixes and modifications to allow running FRED-enabled
kernels in KVM even on non-FRED hardware
- Add kCFI improvements like validating indirect calls and prepare for
enabling kCFI with GCC. Add cmdline params documentation and other
code cleanups
- Use the single-byte 0xd6 insn as the official #UD single-byte
undefined opcode instruction as agreed upon by both x86 vendors
- Other smaller cleanups and touchups all over the place
* tag 'x86_core_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
x86,retpoline: Optimize patch_retpoline()
x86,ibt: Use UDB instead of 0xEA
x86/cfi: Remove __noinitretpoline and __noretpoline
x86/cfi: Add "debug" option to "cfi=" bootparam
x86/cfi: Standardize on common "CFI:" prefix for CFI reports
x86/cfi: Document the "cfi=" bootparam options
x86/traps: Clarify KCFI instruction layout
compiler_types.h: Move __nocfi out of compiler-specific header
objtool: Validate kCFI calls
x86/fred: KVM: VMX: Always use FRED for IRQs when CONFIG_X86_FRED=y
x86/fred: Play nice with invoking asm_fred_entry_from_kvm() on non-FRED hardware
x86/fred: Install system vector handlers even if FRED isn't fully enabled
x86/hyperv: Use direct call to hypercall-page
x86/hyperv: Clean up hv_do_hypercall()
KVM: x86: Remove fastops
KVM: x86: Convert em_salc() to C
KVM: x86: Introduce EM_ASM_3WCL
KVM: x86: Introduce EM_ASM_1SRC2
KVM: x86: Introduce EM_ASM_2CL
KVM: x86: Introduce EM_ASM_2W
...
version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support for
various instruction mnemonics now that the minimum assembler version
supports them all
- The usual cleanups all over the place
-----BEGIN PGP SIGNATURE-----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=dW6J
-----END PGP SIGNATURE-----
Merge tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 cleanups from Borislav Petkov:
- Simplify inline asm flag output operands now that the minimum
compiler version supports the =@ccCOND syntax
- Remove a bunch of AS_* Kconfig symbols which detect assembler support
for various instruction mnemonics now that the minimum assembler
version supports them all
- The usual cleanups all over the place
* tag 'x86_cleanups_for_v6.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Remove code depending on __GCC_ASM_FLAG_OUTPUTS__
x86/sgx: Use ENCLS mnemonic in <kernel/cpu/sgx/encls.h>
x86/mtrr: Remove license boilerplate text with bad FSF address
x86/asm: Use RDPKRU and WRPKRU mnemonics in <asm/special_insns.h>
x86/idle: Use MONITORX and MWAITX mnemonics in <asm/mwait.h>
x86/entry/fred: Push __KERNEL_CS directly
x86/kconfig: Remove CONFIG_AS_AVX512
crypto: x86 - Remove CONFIG_AS_VPCLMULQDQ
crypto: X86 - Remove CONFIG_AS_VAES
crypto: x86 - Remove CONFIG_AS_GFNI
x86/kconfig: Drop unused and needless config X86_64_SMP
Add test to verify that unpinning hash tables containing internal timer
structures does not trigger context warnings.
Each subtest (timer_prealloc and timer_no_prealloc) can trigger the
context warning when unpinning, but the warning cannot be triggered
twice within a short time interval (a HZ), which is expected behavior.
Signed-off-by: KaFai Wan <kafai.wan@linux.dev>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20251008102628.808045-3-kafai.wan@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Current release - regressions:
- mlx5: fix pre-2.40 binutils assembler error
Current release - new code bugs:
- net: psp: don't assume reply skbs will have a socket
- eth: fbnic: fix missing programming of the default descriptor
Previous releases - regressions:
- page_pool: fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches
- tcp:
- take care of zero tp->window_clamp in tcp_set_rcvlowat()
- don't call reqsk_fastopen_remove() in tcp_conn_request().
- eth: ice: release xa entry on adapter allocation failure
- eth: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Previous releases - always broken:
- netfilter: validate objref and objrefmap expressions
- sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce()
- eth: mlx4: prevent potential use after free in mlx4_en_do_uc_filter()
- eth: mlx5: prevent tunnel mode conflicts between FDB and NIC IPsec tables
- eth: ocelot: fix use-after-free caused by cyclic delayed work
Misc:
- add support for MediaTek PCIe 5G HP DRMR-H01
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----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=LlXo
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from netfilter.
Current release - regressions:
- mlx5: fix pre-2.40 binutils assembler error
Current release - new code bugs:
- net: psp: don't assume reply skbs will have a socket
- eth: fbnic: fix missing programming of the default descriptor
Previous releases - regressions:
- page_pool: fix PP_MAGIC_MASK to avoid crashing on some 32-bit arches
- tcp:
- take care of zero tp->window_clamp in tcp_set_rcvlowat()
- don't call reqsk_fastopen_remove() in tcp_conn_request()
- eth:
- ice: release xa entry on adapter allocation failure
- usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
Previous releases - always broken:
- netfilter: validate objref and objrefmap expressions
- sctp: fix a null dereference in sctp_disposition sctp_sf_do_5_1D_ce()
- eth:
- mlx4: prevent potential use after free in mlx4_en_do_uc_filter()
- mlx5: prevent tunnel mode conflicts between FDB and NIC IPsec tables
- ocelot: fix use-after-free caused by cyclic delayed work
Misc:
- add support for MediaTek PCIe 5G HP DRMR-H01"
* tag 'net-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (38 commits)
net: airoha: Fix loopback mode configuration for GDM2 port
selftests: drv-net: pp_alloc_fail: add necessary optoins to config
selftests: drv-net: pp_alloc_fail: lower traffic expectations
selftests: drv-net: fix linter warnings in pp_alloc_fail
eth: fbnic: fix reporting of alloc_failed qstats
selftests: drv-net: xdp: add test for interface level qstats
selftests: drv-net: xdp: rename netnl to ethnl
eth: fbnic: fix saving stats from XDP_TX rings on close
eth: fbnic: fix accounting of XDP packets
eth: fbnic: fix missing programming of the default descriptor
selftests: netfilter: query conntrack state to check for port clash resolution
selftests: netfilter: nft_fib.sh: fix spurious test failures
bridge: br_vlan_fill_forward_path_pvid: use br_vlan_group_rcu()
netfilter: nft_objref: validate objref and objrefmap expressions
net: pse-pd: tps23881: Fix current measurement scaling
net/mlx5: fix pre-2.40 binutils assembler error
net/mlx5e: Do not fail PSP init on missing caps
net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed
net/mlx5: Prevent tunnel mode conflicts between FDB and NIC IPsec tables
net: usb: asix: hold PM usage ref to avoid PM/MDIO + RTNL deadlock
...
Add kernel config for error injection as needed by pp_alloc_fail.py
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 9da271f825 ("selftests: drv-net-hw: add test for memory allocation failures with page pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-10-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lower the expected level of traffic in the pp_alloc_fail test
and calculate failure counter thresholds based on the traffic
rather than using a fixed constant.
We only have "QEMU HW" in NIPA right now, and the test (due to
debug dependencies) only works on debug kernels in the first place.
We need some place for it to pass otherwise it seems to be bit
rotting. So lower the traffic threshold so that it passes on QEMU
and with a debug kernel...
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-9-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Fix linter warnings, it's a bit hard to check for new ones otherwise.
W0311: Bad indentation. Found 16 spaces, expected 12 (bad-indentation)
C0114: Missing module docstring (missing-module-docstring)
W1514: Using open without explicitly specifying an encoding (unspecified-encoding)
C0116: Missing function or method docstring (missing-function-docstring)
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-8-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Send a non-trivial number of packets and make sure that they
are counted correctly in qstats. Per qstats specification
XDP is the first layer of the stack so we should see Rx and Tx
counters go up for packets which went thru XDP.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-6-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Test uses "netnl" for the ethtool family which is quite confusing
(one would expect netdev family would use this name).
No functional changes.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251007232653.2099376-5-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- Extended 'perf annotate' with DWARF type information (--code-with-type)
integration in the TUI, including a 'T' hotkey to toggle it.
- Enhanced 'perf bench mem' with new mmap() workloads and control over
page/chunk sizes.
- Fix 'perf stat' error handling to correctly display unsupported events.
- Improved support for Clang cross-compilation.
- Refactored LLVM and Capstone disasm for modularity.
- Introduced the :X modifier to exclude an event from automatic regrouping.
- Adjusted KVM sampling defaults to use the "cycles" event to prevent failures.
- Added comprehensive support for decoding PowerPC Dispatch Trace Log (DTL).
- Updated Arm SPE tracing logic for better analysis of memory and snoop
details.
- Synchronized Intel PMU events and metrics with TMA 5.1 across multiple
processor generations.
- Converted dependencies like libperl and libtracefs to be opt-in.
- Handle more Rust symbols in kallsyms ('N', debugging).
- Improve the python binding to allow for python based tools to use more
of the libraries, add a 'ilist' utility to test those new bindings.
- Various 'perf test' fixes.
- Kan Liang no longer a perf tools reviewer.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCaObIdAAKCRCyPKLppCJ+
JyM+AQCWCqdMdiOrJfsqwBAthJmLA2j+haprucR9b2XAi0CLTAD8DGaax3XQbIxM
3D6PUd6/qschIy0f77eYqCYjVQXJkQM=
=ibgu
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-for-v6.18-1-2025-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Arnaldo Carvalho de Melo:
- Extended 'perf annotate' with DWARF type information
(--code-with-type) integration in the TUI, including a 'T'
hotkey to toggle it
- Enhanced 'perf bench mem' with new mmap() workloads and control
over page/chunk sizes
- Fix 'perf stat' error handling to correctly display unsupported
events
- Improved support for Clang cross-compilation
- Refactored LLVM and Capstone disasm for modularity
- Introduced the :X modifier to exclude an event from automatic
regrouping
- Adjusted KVM sampling defaults to use the "cycles" event to prevent
failures
- Added comprehensive support for decoding PowerPC Dispatch Trace Log
(DTL)
- Updated Arm SPE tracing logic for better analysis of memory and snoop
details
- Synchronized Intel PMU events and metrics with TMA 5.1 across
multiple processor generations
- Converted dependencies like libperl and libtracefs to be opt-in
- Handle more Rust symbols in kallsyms ('N', debugging)
- Improve the python binding to allow for python based tools to use
more of the libraries, add a 'ilist' utility to test those new
bindings
- Various 'perf test' fixes
- Kan Liang no longer a perf tools reviewer
* tag 'perf-tools-for-v6.18-1-2025-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (192 commits)
perf tools: Fix arm64 libjvmti build by generating unistd_64.h
perf tests: Don't retest sections in "Object code reading"
perf docs: Document building with Clang
perf build: Support build with clang
perf test coresight: Dismiss clang warning for unroll loop thread
perf test coresight: Dismiss clang warning for thread loop
perf test coresight: Dismiss clang warning for memcpy thread
perf build: Disable thread safety analysis for perl header
perf build: Correct CROSS_ARCH for clang
perf python: split Clang options when invoking Popen
tools build: Align warning options with perf
perf disasm: Remove unused evsel from 'struct annotate_args'
perf srcline: Fallback between addr2line implementations
perf disasm: Make ins__scnprintf() and ins__is_nop() static
perf dso: Clean up read_symbol() error handling
perf dso: Support BPF programs in dso__read_symbol()
perf dso: Move read_symbol() from llvm/capstone to dso
perf llvm: Reduce LLVM initialization
perf check: Add libLLVM feature
perf parse-events: Fix parsing of >30kb event strings
...
Jakub reported this self test flaking occasionally (fails, but passes on
re-run) on debug kernels.
This is because the test checks for elapsed time to determine if both
connections were established in parallel.
Rework this to no longer depend on timing.
Use busywait helper to check that both sockets have moved to established
state and then query the conntrack engine for the two entries.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netfilter-devel/20250926163318.40d1a502@kernel.org/
Fixes: 117e149e26 ("selftests: netfilter: test nat source port clash resolution interaction with tcp early demux")
Signed-off-by: Florian Westphal <fw@strlen.de>
Jakub reports spurious failure of nft_fib.sh test.
This is caused by a subtle bug inherited when i moved faulty ping
from one test case to another.
nft_fib.sh not only checks that the fib expression matched, it also
records the number of matches and then validates we have the expected
count. When I did this it was under the assumption that we would
have 0 to n matching packets. In case of the failure, the entry has
n+1 matching packets.
This happens because ping_unreachable helper uses "ping -c 1 -w 1",
instead of the intended "-W". -w alters the meaning of -c (count),
namely, its then treated as number of wanted *replies* instead of
"number of packets to send".
So, in some cases, ping -c 1 -w 1 ends up sending two packets which then
makes the test fail due to the higher-than-expected packet count.
Fix the actual bug (s/-w/-W) and also change the error handling:
1. Show the number of expected packets in the error message
2. Always try to delete the key from the set.
Else, later test that makes sure we don't have unexpected keys
in there will always fail as well.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netfilter-devel/20250927090709.0b3cd783@kernel.org/
Fixes: 98287045c9 ("selftests: netfilter: move fib vrf test to nft_fib.sh")
Signed-off-by: Florian Westphal <fw@strlen.de>
Fix RZ/G3E driver introduction fall-out (Geert Uytterhoeven) and
improve the compilation and installation of the thermal library
for user space (Emil Dahl Juhl and Sascha Hauer)
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmjk+BUSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO16oEH/jAflHmItnOpFOQ59LTODD29OsUYffiN
pEqd/qveu7Hs9Rud5UPEVqvItNfPtCB2mxmD1dYtb0VpB1cTtAEwm1AiO1B35cw0
ycBP4BibEDBg97eHFj4maeKUAa+0xa4IlNVJRdf9b0RdZUkilTq17Iof0RhYFJqC
0Kq838KEUz9WuEFUZCoVKXLkCSexPekjZXDvVeCP9nrlD1b9R656dPcQ6fHBwxrI
5m2jGUkSVkwl/wz2zU1XDNeGALQNGMbM1zZGPXIJbl2fRCFEzsakQALbKelobTQ8
KUnftp4pTfkgjVAMyDwXcmTbJ3Gc0WOfbSDCDTR6jpHC1PW2pcNpBdA=
=NfCR
-----END PGP SIGNATURE-----
Merge tag 'thermal-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more thermal control updates from Rafael Wysocki:
"Fix RZ/G3E driver introduction fall-out (Geert Uytterhoeven) and
improve the compilation and installation of the thermal library for
user space (Emil Dahl Juhl and Sascha Hauer)"
* tag 'thermal-6.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
tools: lib: thermal: expose thermal_exit symbols
tools: lib: thermal: don't preserve owner in install
tools: lib: thermal: use pkg-config to locate libnl3
thermal: renesas: Fix RZ/G3E fall-out
Commit 23ef9d4397 ("kcfi: Rename CONFIG_CFI_CLANG to CONFIG_CFI")
missed one instance of CONFIG_CFI_CLANG. Rename it to match the original
kernel header. This addresses the following build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/cfi_types.h include/linux/cfi_types.h
Cc: Kees Cook <kees@kernel.org>
Fixes: a5ba183bde ("Merge tag 'hardening-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20251006225148.1636486-1-cmllamas@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Linters are still not very happy with our __init__ files,
which was pointed out in recent review (see Link).
We have previously started importing things one by one to
make linters happy with the test files (which import from __init__).
But __init__ file itself still makes linters unhappy.
To clean it up I believe we must completely remove the wildcard
imports, and assign the imported modules to __all__.
hds.py needs to be fixed because it seems to be importing
the Python standard random from lib.net.
We can't use ksft_pr() / ktap_result() in case importing
from net.lib fails. Linters complain that those helpers
themselves may not have been imported.
Link: https://lore.kernel.org/9d215979-6c6d-4e9b-9cdd-39cff595866e@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251003164748.860042-1-kuba@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Mike Snitzer has prototyped a mechanism for disabling I/O caching in
NFSD. This is introduced in v6.18 as an experimental feature. This
enables scaling NFSD in /both/ directions:
- NFS service can be supported on systems with small memory
footprints, such as low-cost cloud instances
- Large NFS workloads will be less likely to force the eviction of
server-local activity, helping it avoid thrashing
Jeff Layton contributed a number of fixes to the new attribute
delegation implementation (based on a pending Internet RFC) that we
hope will make attribute delegation reliable enough to enable by
default, as it is on the Linux NFS client.
The remaining patches in this pull request are clean-ups and minor
optimizations. Many thanks to the contributors, reviewers, testers,
and bug reporters who participated during the v6.18 NFSD development
cycle.
-----BEGIN PGP SIGNATURE-----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=/nLS
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd updates from Chuck Lever:
"Mike Snitzer has prototyped a mechanism for disabling I/O caching in
NFSD. This is introduced in v6.18 as an experimental feature. This
enables scaling NFSD in /both/ directions:
- NFS service can be supported on systems with small memory
footprints, such as low-cost cloud instances
- Large NFS workloads will be less likely to force the eviction of
server-local activity, helping it avoid thrashing
Jeff Layton contributed a number of fixes to the new attribute
delegation implementation (based on a pending Internet RFC) that we
hope will make attribute delegation reliable enough to enable by
default, as it is on the Linux NFS client.
The remaining patches in this pull request are clean-ups and minor
optimizations. Many thanks to the contributors, reviewers, testers,
and bug reporters who participated during the v6.18 NFSD development
cycle"
* tag 'nfsd-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (42 commits)
nfsd: discard nfserr_dropit
SUNRPC: Make RPCSEC_GSS_KRB5 select CRYPTO instead of depending on it
NFSD: Add io_cache_{read,write} controls to debugfs
NFSD: Do the grace period check in ->proc_layoutget
nfsd: delete unnecessary NULL check in __fh_verify()
NFSD: Allow layoutcommit during grace period
NFSD: Disallow layoutget during grace period
sunrpc: fix "occurence"->"occurrence"
nfsd: Don't force CRYPTO_LIB_SHA256 to be built-in
nfsd: nfserr_jukebox in nlm_fopen should lead to a retry
NFSD: Reduce DRC bucket size
NFSD: Delay adding new entries to LRU
SUNRPC: Move the svc_rpcb_cleanup() call sites
NFS: Remove rpcbind cleanup for NFSv4.0 callback
nfsd: unregister with rpcbind when deleting a transport
NFSD: Drop redundant conversion to bool
sunrpc: eliminate return pointer in svc_tcp_sendmsg()
sunrpc: fix pr_notice in svc_tcp_sendto() to show correct length
nfsd: decouple the xprtsec policy check from check_nfsd_access()
NFSD: Fix destination buffer size in nfsd4_ssc_setup_dul()
...
Since commit 22f72088ff ("tools headers: Update the syscall table with
the kernel sources") the arm64 syscall header is generated at build
time. Later, commit bfb713ea53 ("perf tools: Fix arm64 build by
generating unistd_64.h") added a dependency to libperf to guarantee that
this header was created before building libperf or perf itself.
However, libjvmti also requires this header but does not depend on
libperf, leading to build failures such as:
In file included from /usr/include/sys/syscall.h:24,
from /usr/include/syscall.h:1,
from jvmti/jvmti_agent.c:36:
tools/arch/arm64/include/uapi/asm/unistd.h:2:10: fatal error: asm/unistd_64.h: No such file or directory
2 | #include <asm/unistd_64.h>
Fix this by ensuring that libperf is built before libjvmti, so that
unistd_64.h is always available.
Fixes: 22f72088ff ("tools headers: Update the syscall table with the kernel sources")
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Vincent Minet <v.minet@criteo.com>
Link: https://lore.kernel.org/r/20250922053702.2688374-1-v.minet@criteo.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We get a significant number of conflicts between net and net-next
because of selftests Makefile changes. People tend to append new
test cases at the end of the Makefile when there's no clear sort
order. Sort all networking selftests Makefiles, use the following
format:
VAR_NAME := \
entry1 \
entry2 \
entry3 \
# end of VAR_NAME
Some Makefiles are already pretty close to this.
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://patch.msgid.link/20251003210127.1021918-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sort config files for networking selftests. This should help us
avoid merge conflicts between net and net-next. patchwork check
will be added to prevent new issues.
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Acked-by: Florian Westphal <fw@strlen.de>
Acked-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20251003205736.1019673-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We already only test each kcore map once, but on slow systems
(particularly with network filesystems) even the non-kcore maps are
slow.
The test can test the same objdump output over and over which only wastes
time. Generalize the skipping mechanism to track all DSOs and addresses
so that each section is only tested once.
On a fully loaded ARM Juno (simulating a parallel 'perf test' run) with
a network filesystem, the original runtime is:
real 1m51.126s
user 0m19.445s
sys 1m15.431s
And the new runtime is:
real 0m48.873s
user 0m8.031s
sys 0m32.353s
Committer testing:
# perf test "code read"
22: Object code reading : Ok
#
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add example commands for building perf with Clang.
Since recent Android NDK releases use Clang as the default compiler, a
separate Android specific document is no longer needed; point to the
general build documentation instead.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-9-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add support for building perf with clang. For cross compilation, the
Makefile dynamically selects target flag for corresponding arch.
This patch has been verified on x86_64 machine with Ubuntu distro, it
can build successfully for native target, and for cross building Arm64
and s390.
Example: native build on x86_64 / Ubuntu machine:
$ HOSTCC=clang CC=clang CXX=clang++ make -C tools/perf
Example: cross building s390 target on x86_64 / Ubuntu machine:
# Install x390x cross toolchain and headers
$ sudo apt-get install gcc-s390x-linux-gnu g++-s390x-linux-gnu \
libc6-dev-s390x-cross linux-libc-dev-s390x-cross
# Build with clang
$ HOSTCC=clang CC=clang CXX=clang++ \
ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- \
make -C tools/perf NO_LIBELF=1 NO_LIBTRACEEVENT=1 NO_LIBPYTHON=1
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-8-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
clang-18.1.3 on Ubuntu 24.04.2 reports warning:
unroll_loop_thread.c:35:25: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
35 | : /* in */ [in] "r" (in)
| ^
unroll_loop_thread.c:39:1: warning: non-void function does not return a value [-Wreturn-type]
39 | }
| ^
Use the modifier "w" for 32-bit register access and return NULL at the
end of thread function.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-7-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
clang-18.1.3 on Ubuntu 24.04.2 reports warning:
thread_loop.c:41:23: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:37:8: note: use constraint modifier "w"
37 | "add %[i], %[i], #1\n"
| ^~~~
| %w[i]
thread_loop.c:41:23: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:37:14: note: use constraint modifier "w"
37 | "add %[i], %[i], #1\n"
| ^~~~
| %w[i]
thread_loop.c:41:23: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:38:8: note: use constraint modifier "w"
38 | "cmp %[i], %[len]\n"
| ^~~~
| %w[i]
thread_loop.c:41:38: warning: value size does not match register size specified by the constraint and modifier [-Wasm-operand-widths]
41 | : /* in */ [i] "r" (i), [len] "r" (len)
| ^
thread_loop.c:38:14: note: use constraint modifier "w"
38 | "cmp %[i], %[len]\n"
| ^~~~~~
| %w[len]
Use the modifier "w" for 32-bit register access.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-6-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
clang-18.1.3 on Ubuntu 24.04.2 reports warning:
memcpy_thread.c:30:1: warning: non-void function does not return a value in all control paths [-Wreturn-type]
30 | }
| ^
Dismiss the warning with returning NULL from the thread function.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-5-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When build with perl5, it reports error:
In file included from /usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/perl.h:7933:
/usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/inline.h:298:5: error:
mutex 'PL_env_mutex.lock' is not held on every path through
here [-Werror,-Wthread-safety-analysis]
298 | ENV_UNLOCK;
| ^
/usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/perl.h:7091:31: note:
expanded from macro 'ENV_UNLOCK'
7091 | # define ENV_UNLOCK PERL_REENTRANT_UNLOCK("env"...
| ^
/usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/perl.h:6465:7: note:
expanded from macro 'PERL_REENTRANT_UNLOCK'
6465 | } STMT_END
| ^
/usr/lib/perl5/5.42.0/x86_64-linux-thread-multi/CORE/perl.h:865:28: note:
expanded from macro 'STMT_END'
865 | # define STMT_END while (0)
| ^
The error is caused by perl header but not perf code, disable thread
safety analysis if including the header.
Though GCC does not support the thread safety analysis option, this
negative warning flag is silently ignored by it.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-4-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Clang's -dumpmachine outputs "aarch64-unknown-linux-gnu", which does not
match the MultiArch convention. This prevents the build system from
detecting installed packages.
Fix by stripping the trailing '-' from CROSS_COMPILE when setting
CROSS_ARCH.
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-3-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When passing a list to subprocess.Popen, each element maps to one argv
token. Current code bundles multiple Clang flags into a single element,
something like:
cmd = ['clang',
'--target=x86_64-linux-gnu -fintegrated-as -Wno-cast-function-type-mismatch',
'test-hello.c']
So Clang only sees one long, invalid option instead of separate flags,
as a result, the script cannot capture any log via PIPE.
Fix this by using shlex.split() to separate the string so each option
becomes its own argv element. The fixed list will be:
cmd = ['clang',
'--target=x86_64-linux-gnu',
'-fintegrated-as',
'-Wno-cast-function-type-mismatch',
'test-hello.c']
Fixes: 09e6f9f983 ("perf python: Fix splitting CC into compiler and options")
Signed-off-by: Leo Yan <leo.yan@arm.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20251006-perf_build_android_ndk-v3-2-4305590795b2@arm.com
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Nick Desaulniers <nick.desaulniers+lkml@gmail.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: linux-riscv@lists.infradead.org
Cc: llvm@lists.linux.dev
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
