Commit graph

112,392 commits

Author SHA1 Message Date
Felix Fietkau
15965d8c9c mt76: mt7603: improve reliability of tx powersave filtering
Leave more time to abort transmissions (which could happen at low CCK rates)
Only warn if the last filter command is stuck

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:01 +01:00
Felix Fietkau
608f7c47df mt76: clear sta powersave flag after notifying driver
If the driver has configured the hardware to drop packets for a sta that was
in powersave mode, then clearing the flag too early opens up a small race
window during which packets could be dropped on wakeup

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:01 +01:00
Lorenzo Bianconi
2c70627b09 mt76: mt7915: introduce SAR support
Add SAR spec support to mt7915 driver to allow configuring SAR power
limitations on the frequency ranges from the userland.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:01 +01:00
Lorenzo Bianconi
4bbd6d83af mt76: mt7603: introduce SAR support
Add SAR spec support to mt7603 driver to allow configuring SAR power
limitations on the frequency ranges from the userland.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:01 +01:00
Felix Fietkau
92610d6df8 mt76: mt7915: improve wmm index allocation
Typically all AP interfaces on a PHY will share the same WMM settings, while
sta/mesh interfaces will usually inherit the settings from a remote device.
In order minimize the likelihood of conflicting WMM settings, make all AP
interfaces share one slot, and all non-AP interfaces another one.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:01 +01:00
Felix Fietkau
70fb028707 mt76: mt7615: improve wmm index allocation
Typically all AP interfaces on a PHY will share the same WMM settings, while
sta/mesh interfaces will usually inherit the settings from a remote device.
In order minimize the likelihood of conflicting WMM settings, make all AP
interfaces share one slot, and all non-AP interfaces another one.

This also fixes running multiple AP interfaces on MT7613, which only has 3
WMM slots.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:01 +01:00
Shayne Chen
792e1d21aa mt76: mt7615: fix unused tx antenna mask in testmode
The mask variable is assigned but not used after testmode disabled:
if (!en)
	mask = phy->mt76->chainmask;

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:00 +01:00
Sean Wang
5ad4faca76 mt76: mt7921s: fix the device cannot sleep deeply in suspend
According to the MT7921S firmware, the cmd MCU_UNI_CMD_HIF_CTRL have to
be last MCU command to execute in suspend handler and all data traffic
have to be stopped before the cmd MCU_UNI_CMD_HIF_CTRL starts as well
in order that mt7921 can successfully fall into the deep sleep mode.

Where we reuse the flag MT76_STATE_SUSPEND and avoid creating
another global flag to stop all of the traffic onto the SDIO bus.

Fixes: 48fab5bbef ("mt76: mt7921: introduce mt7921s support")
Reported-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:00 +01:00
Sean Wang
6906aa93eb mt76: mt7921: move mt76_connac_mcu_set_hif_suspend to bus-related files
This is a preliminary patch for the following patch
("mt76: mt7921s: fix the device cannot sleep deeply in suspend).

mt76_connac_mcu_set_hif_suspend eventually would be handled in each
bus-level suspend/resume handler in either mt7921/sdio.c or mt7921/pci.c
depending on what type of the bus the device is running on. We can move
mt76_connac_mcu_set_hif_suspend to bus-related files to simplify the logic.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:00 +01:00
Felix Fietkau
838fcae7f5 mt76: mt7615: fix decap offload corner case with 4-addr VLAN frames
With 4-address mode VLAN frames, an internal header translation step fails,
leaving behind an extra 2-byte length field that must be reomved by the driver.
Add a check for this condition to fix receiving such packets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:00 +01:00
Felix Fietkau
1eeff0b4c1 mt76: mt7915: fix decap offload corner case with 4-addr VLAN frames
With 4-address mode VLAN frames, an internal header translation step fails,
leaving behind an extra 2-byte length field that must be reomved by the driver.
Add a check for this condition to fix receiving such packets

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:00 +01:00
Lorenzo Bianconi
633f77b517 mt76: mt76x02: introduce SAR support
Add SAR spec support to mt76x02 driver to allow configuring SAR power
limitations on the frequency ranges from the userland.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:00 +01:00
Lorenzo Bianconi
b3cb885e56 mt76: move sar utilities to mt76-core module
Move mt76_get_sar_power and mt76_init_sar_power in the common code.
This is a preliminary patch to add sar support to mt76x02 drivers.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:00 +01:00
Lorenzo Bianconi
5d461321c9 mt76: mt7921: honor mt76_connac_mcu_set_rate_txpower return value in mt7921_config
Check return code from mt76_connac_mcu_set_rate_txpower() in mt7921_config
routine.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:00 +01:00
Bo Jiao
0a57d63601 mt76: fix the wiphy's available antennas to the correct value
the wiphy's available antennas may be incorrect
When ext phy's antenna_mask is different from main phy

Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:24:00 +01:00
Xing Song
dd28dea52a mt76: do not pass the received frame with decryption error
MAC80211 doesn't care any decryption error in 802.3 path, so received
frame will be dropped if HW tell us that the cipher configuration is not
matched as well as the header has been translated to 802.3. This case only
appears when IEEE80211_FCTL_PROTECTED is 0 and cipher suit is not none in
the corresponding HW entry.

The received frame is only reported to monitor interface if HW decryption
block tell us there is ICV error or CCMP/BIP/WPI MIC error. Note in this
case the reported frame is decrypted 802.11 frame and the payload may be
malformed due to mismatched key.

Signed-off-by: Xing Song <xing.song@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:23:59 +01:00
Lorenzo Bianconi
dfdf6725d5 mt76: connac: remove PHY_MODE_AX_6G configuration in mt76_connac_get_phy_mode
Get rid of PHY_MODE_AX_6G configuration in mt76_connac_get_phy_mode
routine since mode is an u8 and PHY_MODE_AX_6G is set in phymode_ext
field in mt76_connac_bss_basic_tlv.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:23:59 +01:00
Lorenzo Bianconi
e4fce22b5b mt76: mt7615: remove dead code in get_omac_idx
Remove always false if condition in get_omac_idx for sta type

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:23:59 +01:00
Lorenzo Bianconi
c9dbeac498 mt76: connac: fix a theoretical NULL pointer dereference in mt76_connac_get_phy_mode
Even if it is not a real bug since mt76_connac_get_phy_mode runs just
for mt7921 where only STA is supported, fix a theoretical NULL pointer
dereference if new added modes do not support HE

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:23:59 +01:00
Lorenzo Bianconi
ec2ebc1c5a mt76: mt7921: fix possible NULL pointer dereference in mt7921_mac_write_txwi
Fix a possible NULL pointer deference issue in mt7921_mac_write_txwi
routine if vif is NULL.

Fixes: 33920b2bf0 ("mt76: add support for setting mcast rate")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:23:59 +01:00
Lorenzo Bianconi
d4f3d1c4d3 mt76: fix possible OOB issue in mt76_calculate_default_rate
Cap max offset value to ARRAY_SIZE(mt76_rates) - 1 in
mt76_calculate_default_rate routine in order to avoid possible Out Of
Bound accesses.

Fixes: 33920b2bf0 ("mt76: add support for setting mcast rate")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:23:59 +01:00
Deren Wu
7f96905068 mt76: mt7921: introduce 160 MHz channel bandwidth support
Introduce the basic configuration for BW160 capability in 7922

Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:23:59 +01:00
Lorenzo Bianconi
eae7df016c mt76: debugfs: fix queue reporting for mt76-usb
Fix number of rx-queued frames reported by mt76_usb driver.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: 2d8be76c16 ("mt76: debugfs: improve queue node readability")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-19 15:23:53 +01:00
Baowen Zheng
5a9959008f flow_offload: add index to flow_action_entry structure
Add index to flow_action_entry structure and delete index from police and
gate child structure.

We make this change to offload tc action for driver to identify a tc
action.

Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19 14:08:47 +00:00
Baowen Zheng
144d4c9e80 flow_offload: reject to offload tc actions in offload drivers
A follow-up patch will allow users to offload tc actions independent of
classifier in the software datapath.

In preparation for this, teach all drivers that support offload of the flow
tables to reject such configuration as currently none of them support it.

Signed-off-by: Baowen Zheng <baowen.zheng@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-19 14:08:47 +00:00
Jiasheng Jiang
60ec7fcfe7 qlcnic: potential dereference null pointer of rx_queue->page_ring
The return value of kcalloc() needs to be checked.
To avoid dereference of null pointer in case of the failure of alloc.
Therefore, it might be better to change the return type of
qlcnic_sriov_alloc_vlans() and return -ENOMEM when alloc fails and
return 0 the others.
Also, qlcnic_sriov_set_guest_vlan_mode() and __qlcnic_pci_sriov_enable()
should deal with the return value of qlcnic_sriov_alloc_vlans().

Fixes: 154d0c810c ("qlcnic: VLAN enhancement for 84XX adapters")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-18 12:37:12 +00:00
Lin Ma
b2f37aead1 hamradio: improve the incomplete fix to avoid NPD
The previous commit 3e0588c291 ("hamradio: defer ax25 kfree after
unregister_netdev") reorder the kfree operations and unregister_netdev
operation to prevent UAF.

This commit improves the previous one by also deferring the nullify of
the ax->tty pointer. Otherwise, a NULL pointer dereference bug occurs.
Partial of the stack trace is shown below.

BUG: kernel NULL pointer dereference, address: 0000000000000538
RIP: 0010:ax_xmit+0x1f9/0x400
...
Call Trace:
 dev_hard_start_xmit+0xec/0x320
 sch_direct_xmit+0xea/0x240
 __qdisc_run+0x166/0x5c0
 __dev_queue_xmit+0x2c7/0xaf0
 ax25_std_establish_data_link+0x59/0x60
 ax25_connect+0x3a0/0x500
 ? security_socket_connect+0x2b/0x40
 __sys_connect+0x96/0xc0
 ? __hrtimer_init+0xc0/0xc0
 ? common_nsleep+0x2e/0x50
 ? switch_fpu_return+0x139/0x1a0
 __x64_sys_connect+0x11/0x20
 do_syscall_64+0x33/0x40
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

The crash point is shown as below

static void ax_encaps(...) {
  ...
  set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags); // ax->tty = NULL!
  ...
}

By placing the nullify action after the unregister_netdev, the ax->tty
pointer won't be assigned as NULL net_device framework layer is well
synchronized.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-18 12:32:48 +00:00
David S. Miller
23044d77d6 Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
40GbE Intel Wired LAN Driver Updates 2021-12-17

Brett Creeley says:

This patch series adds support in the iavf driver for communicating and
using VIRTCHNL_VF_OFFLOAD_VLAN_V2. The current VIRTCHNL_VF_OFFLOAD_VLAN
is very limited and covers all 802.1Q VLAN offloads and filtering with
no granularity.

The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 adds more granularity, flexibility,
and support for 802.1ad offloads and filtering. This includes the VF
negotiating which VLAN offloads/filtering it's allowed, where VLAN tags
should be inserted and/or stripped into and from descriptors, and the
supported VLAN protocols.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-18 12:22:17 +00:00
David S. Miller
aa3cc8a9e4 Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-12-17

Maciej Fijalkowski says:

It seems that previous [0] Rx fix was not enough and there are still
issues with AF_XDP Rx ZC support in ice driver. Elza reported that for
multiple XSK sockets configured on a single netdev, some of them were
becoming dead after a while. We have spotted more things that needed to
be addressed this time. More of information can be found in particular
commit messages.

It also carries Alexandr's patch that was sent previously which was
overlapping with this set.

[0]: https://lore.kernel.org/bpf/20211129231746.2767739-1-anthony.l.nguyen@intel.com/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-18 12:19:15 +00:00
Deren Wu
f395d41f2a mt76: mt7921: add support for PCIe ID 0x0608/0x0616
New mt7921 serials chip support

Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-18 11:47:57 +01:00
Shayne Chen
c40b42c2b8 mt76: testmode: add support to set MAC
Add support to set SA/DA/BSSID in testmode.
During mass production stage, some test scripts or test equipments need
to set fixed addresses to detect or parse if a test is passed.
Also, MAC setting is necessary for some tx/rx tests with rx filter,
to make sure rx site only receives expected packets.

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-18 11:47:57 +01:00
Shayne Chen
bbc1d4154e mt76: mt7915: add default calibrated data support
Load the default eeprom data when the content of flash/efuse is invalid.
This could help to eliminate some issues due to incorrect or
insufficient rf values.

Co-developed-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Bo Jiao <Bo.Jiao@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-18 11:47:57 +01:00
Ryder Lee
c23fa1bbc5 mt76: only set rx radiotap flag from within decoder functions
Only set RX_FLAG_RADIOTAP_HE and RX_FLAG_RADIOTAP_HE_MU from with their
own decoder functions to prevent header calculation error.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-18 11:47:57 +01:00
Xing Song
dc5399a50b mt76: reverse the first fragmented frame to 802.11
The HW can apply header translation to first fragmented frame, and
ramaining fragmented frame can only keep 802.11 format. Check and
reverse the first fragmented frame to  802.11 format to make sure
them can be defragmented by mac80211.

Signed-off-by: Xing Song <xing.song@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-18 11:47:57 +01:00
Ryder Lee
8f05835425 mt76: mt7915: fix SMPS operation fail
TGn fails sending SM power save mode action frame to the AP to switch
from dynamic SMPS mode to static mode.

Reported-by: Fang Zhao <fang.zhao@mediatek.com>
Signed-off-by: Fang Zhao <fang.zhao@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-18 11:47:57 +01:00
Shayne Chen
edc0831830 mt76: mt7915: fix return condition in mt7915_tm_reg_backup_restore()
Fix the issue that some registers not configured properly after
restarting testmode.
(e.g. change state from idle to off, and off to idle)

Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-18 11:47:57 +01:00
Sean Wang
0efaf31dec mt76: mt7921: fix MT7921E reset failure
There is a missing mt7921e_driver_own in the MT7921E reset procedure
since the mt7921 mcu.c has been refactored for MT7921S, that will
result in MT7921E reset failure, so add it back now.

Fixes: dfc7743de1 ("mt76: mt7921: refactor mcu.c to be bus independent")
Reported-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-18 11:47:57 +01:00
Peter Chiu
8c55516de3 mt76: mt7615: fix possible deadlock while mt7615_register_ext_phy()
ieee80211_register_hw() is called with rtnl_lock held, and this could be
caused lockdep from a work item that's on a workqueue that is flushed
with the rtnl held.

Move mt7615_register_ext_phy() outside the init_work().

Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-18 11:47:57 +01:00
Sean Wang
2363b6a646 mt76: mt7921: drop offload_flags overwritten
offload_flags have to be dropped for mt7921 because mt76.omac_idx 0 would
always run as station mode that would cause Tx encapsulation setting
is not applied to mac80211.

Also, drop IEEE80211_OFFLOAD_ENCAP_4ADDR too because it is not really
being supported.

Fixes: e0f9fdda81 ("mt76: mt7921: add ieee80211_ops")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-18 11:47:56 +01:00
Lorenzo Bianconi
e42603af7e mt76: mt7915: get rid of mt7915_mcu_set_fixed_rate routine
Fix the following sparse warning removing mt7915_mcu_set_fixed_rate
since it is no longer used:
warning: symbol 'mt7915_mcu_set_fixed_rate' was not declared.
Should it be static?

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-12-18 11:47:56 +01:00
Dan Carpenter
ab9d0e2171 net: ethernet: mtk_eth_soc: delete some dead code
The debugfs_create_dir() function never returns NULL.  It does return
error pointers but in normal situations like this there is no need to
check for errors.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211217071037.GE26548@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17 19:24:38 -08:00
Dan Carpenter
ddfbe18da5 net: mtk_eth_soc: delete an unneeded variable
There is already an "int err" declared at the start of the function so
re-use that instead of declaring a shadow err variable.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20211217070735.GC26548@kili
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17 19:24:26 -08:00
Gerhard Engleder
00315e1627 tsnep: Fix s390 devm_ioremap_resource warning
The following warning is fixed with additional config dependencies:

s390-linux-ld: drivers/net/ethernet/engleder/tsnep_main.o: in function `tsnep_probe':
tsnep_main.c:(.text+0x1de6): undefined reference to `devm_ioremap_resource'

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://lore.kernel.org/r/20211216200154.1520-1-gerhard@engleder-embedded.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17 19:22:57 -08:00
George Kennedy
158b515f70 tun: avoid double free in tun_free_netdev
Avoid double free in tun_free_netdev() by moving the
dev->tstats and tun->security allocs to a new ndo_init routine
(tun_net_init()) that will be called by register_netdevice().
ndo_init is paired with the desctructor (tun_free_netdev()),
so if there's an error in register_netdevice() the destructor
will handle the frees.

BUG: KASAN: double-free or invalid-free in selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605

CPU: 0 PID: 25750 Comm: syz-executor416 Not tainted 5.16.0-rc2-syzk #1
Hardware name: Red Hat KVM, BIOS
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0x89/0xb5 lib/dump_stack.c:106
print_address_description.constprop.9+0x28/0x160 mm/kasan/report.c:247
kasan_report_invalid_free+0x55/0x80 mm/kasan/report.c:372
____kasan_slab_free mm/kasan/common.c:346 [inline]
__kasan_slab_free+0x107/0x120 mm/kasan/common.c:374
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:1723 [inline]
slab_free_freelist_hook mm/slub.c:1749 [inline]
slab_free mm/slub.c:3513 [inline]
kfree+0xac/0x2d0 mm/slub.c:4561
selinux_tun_dev_free_security+0x1a/0x20 security/selinux/hooks.c:5605
security_tun_dev_free_security+0x4f/0x90 security/security.c:2342
tun_free_netdev+0xe6/0x150 drivers/net/tun.c:2215
netdev_run_todo+0x4df/0x840 net/core/dev.c:10627
rtnl_unlock+0x13/0x20 net/core/rtnetlink.c:112
__tun_chr_ioctl+0x80c/0x2870 drivers/net/tun.c:3302
tun_chr_ioctl+0x2f/0x40 drivers/net/tun.c:3311
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:874 [inline]
__se_sys_ioctl fs/ioctl.c:860 [inline]
__x64_sys_ioctl+0x19d/0x220 fs/ioctl.c:860
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3a/0x80 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae

Reported-by: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/1639679132-19884-1-git-send-email-george.kennedy@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17 19:21:58 -08:00
Yevhen Orlov
2efc2256fe net: marvell: prestera: fix incorrect structure access
In line:
	upper = info->upper_dev;
We access upper_dev field, which is related only for particular events
(e.g. event == NETDEV_CHANGEUPPER). So, this line cause invalid memory
access for another events,
when ptr is not netdev_notifier_changeupper_info.

The KASAN logs are as follows:

[   30.123165] BUG: KASAN: stack-out-of-bounds in prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera]
[   30.133336] Read of size 8 at addr ffff80000cf772b0 by task udevd/778
[   30.139866]
[   30.141398] CPU: 0 PID: 778 Comm: udevd Not tainted 5.16.0-rc3 #6
[   30.147588] Hardware name: DNI AmazonGo1 A7040 board (DT)
[   30.153056] Call trace:
[   30.155547]  dump_backtrace+0x0/0x2c0
[   30.159320]  show_stack+0x18/0x30
[   30.162729]  dump_stack_lvl+0x68/0x84
[   30.166491]  print_address_description.constprop.0+0x74/0x2b8
[   30.172346]  kasan_report+0x1e8/0x250
[   30.176102]  __asan_load8+0x98/0xe0
[   30.179682]  prestera_netdev_port_event.constprop.0+0x68/0x538 [prestera]
[   30.186847]  prestera_netdev_event_handler+0x1b4/0x1c0 [prestera]
[   30.193313]  raw_notifier_call_chain+0x74/0xa0
[   30.197860]  call_netdevice_notifiers_info+0x68/0xc0
[   30.202924]  register_netdevice+0x3cc/0x760
[   30.207190]  register_netdev+0x24/0x50
[   30.211015]  prestera_device_register+0x8a0/0xba0 [prestera]

Fixes: 3d5048cc54 ("net: marvell: prestera: move netdev topology validation to prestera_main")
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Link: https://lore.kernel.org/r/20211216171714.11341-1-yevhen.orlov@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17 19:19:09 -08:00
Yevhen Orlov
8b681bd7c3 net: marvell: prestera: fix incorrect return of port_find
In case, when some ports is in list and we don't find requested - we
return last iterator state and not return NULL as expected.

Fixes: 501ef3066c ("net: marvell: prestera: Add driver for Prestera family ASIC devices")
Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Link: https://lore.kernel.org/r/20211216170736.8851-1-yevhen.orlov@plvision.eu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17 19:19:00 -08:00
Aleksander Jan Bajkowski
1488fc2045 net: lantiq_xrx200: increase buffer reservation
If the user sets a lower mtu on the CPU port than on the switch,
then DMA inserts a few more bytes into the buffer than expected.
In the worst case, it may exceed the size of the buffer. The
experiments showed that the buffer should be a multiple of the
burst length value. This patch rounds the length of the rx buffer
upwards and fixes this bug. The reservation of FCS space in the
buffer has been removed as PMAC strips the FCS.

Fixes: 998ac35801 ("net: lantiq: add support for jumbo frames")
Reported-by: Thomas Nixon <tom@tomn.co.uk>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-17 19:18:29 -08:00
Brett Creeley
92fc508598 iavf: Restrict maximum VLAN filters for VIRTCHNL_VF_OFFLOAD_VLAN_V2
For VIRTCHNL_VF_OFFLOAD_VLAN, PF's would limit the number of VLAN
filters a VF was allowed to add. However, by the time the opcode failed,
the VLAN netdev had already been added. VIRTCHNL_VF_OFFLOAD_VLAN_V2
added the ability for a PF to tell the VF how many VLAN filters it's
allowed to add. Make changes to support that functionality.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-17 12:37:19 -08:00
Brett Creeley
8afadd1cd8 iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 offload enable/disable
The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability added support that allows
the VF to support 802.1Q and 802.1ad VLAN insertion and stripping if
successfully negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS.
Multiple changes were needed to support this new functionality.

1. Added new aq_required flags to support any kind of VLAN stripping and
   insertion offload requests via virtchnl.

2. Added the new method iavf_set_vlan_offload_features() that's
   used during VF initialization, VF reset, and iavf_set_features() to
   set the aq_required bits based on the current VLAN offload
   configuration of the VF's netdev.

3. Added virtchnl handling for VIRTCHNL_OP_ENABLE_STRIPPING_V2,
   VIRTCHNL_OP_DISABLE_STRIPPING_V2, VIRTCHNL_OP_ENABLE_INSERTION_V2,
   and VIRTCHNL_OP_ENABLE_INSERTION_V2.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-17 12:37:19 -08:00
Brett Creeley
ccd219d2ea iavf: Add support for VIRTCHNL_VF_OFFLOAD_VLAN_V2 hotpath
The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability added support that allows
the PF to set the location of the Tx and Rx VLAN tag for insertion and
stripping offloads. In order to support this functionality a few changes
are needed.

1. Add a new method to cache the VLAN tag location based on negotiated
   capabilities for the Tx and Rx ring flags. This needs to be called in
   the initialization and reset paths.

2. Refactor the transmit hotpath to account for the new Tx ring flags.
   When IAVF_TXR_FLAGS_VLAN_LOC_L2TAG2 is set, then the driver needs to
   insert the VLAN tag in the L2TAG2 field of the transmit descriptor.
   When the IAVF_TXRX_FLAGS_VLAN_LOC_L2TAG1 is set, then the driver needs
   to use the l2tag1 field of the data descriptor (same behavior as
   before).

3. Refactor the iavf_tx_prepare_vlan_flags() function to simplify
   transmit hardware VLAN offload functionality by only depending on the
   skb_vlan_tag_present() function. This can be done because the OS
   won't request transmit offload for a VLAN unless the driver told the
   OS it's supported and enabled.

4. Refactor the receive hotpath to account for the new Rx ring flags and
   VLAN ethertypes. This requires checking the Rx ring flags and
   descriptor status bits to determine the location of the VLAN tag.
   Also, since only a single ethertype can be supported at a time, check
   the enabled netdev features before specifying a VLAN ethertype in
   __vlan_hwaccel_put_tag().

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-12-17 12:37:19 -08:00