Commit graph

112,392 commits

Author SHA1 Message Date
Lin Ma
81b1d548d0 hamradio: remove needs_free_netdev to avoid UAF
The former patch "defer 6pack kfree after unregister_netdev" reorders
the kfree of two buffer after the unregister_netdev to prevent the race
condition. It also adds free_netdev() function in sixpack_close(), which
is a direct copy from the similar code in mkiss_close().

However, in sixpack driver, the flag needs_free_netdev is set to true in
sp_setup(), hence the unregister_netdev() will free the netdev
automatically. Therefore, as the sp is netdev_priv, use-after-free
occurs.

This patch removes the needs_free_netdev = true and just let the
free_netdev to finish this deallocation task.

Fixes: 0b9111922b ("hamradio: defer 6pack kfree after unregister_netdev")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Link: https://lore.kernel.org/r/20211111141402.7551-1-linma@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-12 19:56:47 -08:00
Rameshkumar Sundaram
c802b6d781 ath11k: Clear auth flag only for actual association in security mode
AUTH flag is needed when peer assoc command is sent from host in
security mode for non-assoc cases. Firmware will handle AUTH flag
when client is associating as AUTH flag will be set after key exchange.
For internally provided peer assoc commands from host, there won't be
any key exchange, so AUTH flag is expected to be set in host.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1

Co-developed-by: Lavanya Suresh <lavaks@codeaurora.org>
Signed-off-by: Lavanya Suresh <lavaks@codeaurora.org>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1635177786-20854-1-git-send-email-quic_ramess@quicinc.com
2021-11-12 10:01:48 +02:00
Rameshkumar Sundaram
16a2c3d540 ath11k: Send PPDU_STATS_CFG with proper pdev mask to firmware
HTT_PPDU_STATS_CFG_PDEV_ID bit mask for target FW PPDU stats request message
was set as bit 8 to 15. Bit 8 is reserved for soc stats and pdev id starts from
bit 9. Hence change the bitmask as bit 9 to 15 and fill the proper pdev id in
the request message.

In commit 701e48a43e ("ath11k: add packet log support for QCA6390"), both
HTT_PPDU_STATS_CFG_PDEV_ID and pdev_mask were changed, but this pdev_mask
calculation is not valid for platforms which has multiple pdevs with 1 rxdma
per pdev, as this is writing same value(i.e. 2) for all pdevs.  Hence fixed it
to consider pdev_idx as well, to make it compatible for both single and multi
pd cases.

Tested on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01092-QCAHKSWPL_SILICONZ-1
Tested on: IPQ6018 hw1.0 WLAN.HK.2.5.0.1-01067-QCAHKSWPL_SILICONZ-1

Fixes: 701e48a43e ("ath11k: add packet log support for QCA6390")

Co-developed-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Sathishkumar Muruganandam <murugana@codeaurora.org>
Signed-off-by: Rameshkumar Sundaram <ramess@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210721212029.142388-10-jouni@codeaurora.org
2021-11-12 10:01:15 +02:00
Zekun Shen
ae80b60338 ar5523: Fix null-ptr-deref with unexpected WDCMSG_TARGET_START reply
Unexpected WDCMSG_TARGET_START replay can lead to null-ptr-deref
when ar->tx_cmd->odata is NULL. The patch adds a null check to
prevent such case.

KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
 ar5523_cmd+0x46a/0x581 [ar5523]
 ar5523_probe.cold+0x1b7/0x18da [ar5523]
 ? ar5523_cmd_rx_cb+0x7a0/0x7a0 [ar5523]
 ? __pm_runtime_set_status+0x54a/0x8f0
 ? _raw_spin_trylock_bh+0x120/0x120
 ? pm_runtime_barrier+0x220/0x220
 ? __pm_runtime_resume+0xb1/0xf0
 usb_probe_interface+0x25b/0x710
 really_probe+0x209/0x5d0
 driver_probe_device+0xc6/0x1b0
 device_driver_attach+0xe2/0x120

I found the bug using a custome USBFuzz port. It's a research work
to fuzz USB stack/drivers. I modified it to fuzz ath9k driver only,
providing hand-crafted usb descriptors to QEMU.

After fixing the code (fourth byte in usb packet) to WDCMSG_TARGET_START,
I got the null-ptr-deref bug. I believe the bug is triggerable whenever
cmd->odata is NULL. After patching, I tested with the same input and no
longer see the KASAN report.

This was NOT tested on a real device.

Signed-off-by: Zekun Shen <bruceshenzk@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/YXsmPQ3awHFLuAj2@10-18-43-117.dynapool.wireless.nyu.edu
2021-11-12 09:53:57 +02:00
Linus Torvalds
f54ca91fe6 Networking fixes for 5.16-rc1, including fixes from bpf, can
and netfilter.
 
 Current release - regressions:
 
  - bpf: do not reject when the stack read size is different
    from the tracked scalar size
 
  - net: fix premature exit from NAPI state polling in napi_disable()
 
  - riscv, bpf: fix RV32 broken build, and silence RV64 warning
 
 Current release - new code bugs:
 
  - net: fix possible NULL deref in sock_reserve_memory
 
  - amt: fix error return code in amt_init(); fix stopping the workqueue
 
  - ax88796c: use the correct ioctl callback
 
 Previous releases - always broken:
 
  - bpf: stop caching subprog index in the bpf_pseudo_func insn
 
  - security: fixups for the security hooks in sctp
 
  - nfc: add necessary privilege flags in netlink layer, limit operations
    to admin only
 
  - vsock: prevent unnecessary refcnt inc for non-blocking connect
 
  - net/smc: fix sk_refcnt underflow on link down and fallback
 
  - nfnetlink_queue: fix OOB when mac header was cleared
 
  - can: j1939: ignore invalid messages per standard
 
  - bpf, sockmap:
    - fix race in ingress receive verdict with redirect to self
    - fix incorrect sk_skb data_end access when src_reg = dst_reg
    - strparser, and tls are reusing qdisc_skb_cb and colliding
 
  - ethtool: fix ethtool msg len calculation for pause stats
 
  - vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries
    to access an unregistering real_dev
 
  - udp6: make encap_rcv() bump the v6 not v4 stats
 
  - drv: prestera: add explicit padding to fix m68k build
 
  - drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge
 
  - drv: mvpp2: fix wrong SerDes reconfiguration order
 
 Misc & small latecomers:
 
  - ipvs: auto-load ipvs on genl access
 
  - mctp: sanity check the struct sockaddr_mctp padding fields
 
  - libfs: support RENAME_EXCHANGE in simple_rename()
 
  - avoid double accounting for pure zerocopy skbs
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAmGNQdwACgkQMUZtbf5S
 IrsiMQ//f66lTJ8PJ5Qj70hX9dC897olx7uGHB9eiKoyOcJI459hFlfXwRU2T4Tf
 fPNwPNUQ9Mynw9tX/jWEi+7zd6r6TSHGXK49U9/rIbQ95QjKY4LHowIE63x+vPl2
 5Cpf+80zXC3DUX1fijgyG1ujnU3kBaqopTxDLmlsHw2PGkwT5Ox1DUwkhc370eEL
 xlpq3PYGWA8/AQNyhSVBkG/UmoLaq0jYNP5yVcOj4jGjgcgLe1SLrqczENr35QHZ
 cRkuBsFBMBZF7wSX2f9qQIB/+b1pcLlD9IO+K3S7Ruq+rUd7qfL/tmwNxEh0axYK
 AyIun1Bxcy7QJGjtpGAz+Ku7jS9T3HxzyxhqilQo3co8jAW0WJ1YwHl+XPgQXyjV
 DLG6Vxt4syiwsoSXGn8MQugs4nlBT+0qWl8YamIR+o7KkAYPc2QWkXlzEDfNeIW8
 JNCZA3sy7VGi1ytorZGx16sQsEWnyRG9a6/WV20Dr+HVs1SKPcFzIfG6mVngR07T
 mQMHnbAF6Z5d8VTcPQfMxd7UH48s1bHtk5lcSTa3j0Cw+GkA6ytTmjPdJ1qRcdkH
 dl9jAfADe4O6frG+9XH7FEFqhmkghVI7bOCA4ZOhClVaIcDGgEZc2y7sY9/oZ7P4
 KXBD2R5X1caCUM0UtzwL7/8ddOtPtHIrFnhY+7+I6ijt9qmI0BY=
 =Ttgq
 -----END PGP SIGNATURE-----

Merge tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, can and netfilter.

  Current release - regressions:

   - bpf: do not reject when the stack read size is different from the
     tracked scalar size

   - net: fix premature exit from NAPI state polling in napi_disable()

   - riscv, bpf: fix RV32 broken build, and silence RV64 warning

  Current release - new code bugs:

   - net: fix possible NULL deref in sock_reserve_memory

   - amt: fix error return code in amt_init(); fix stopping the
     workqueue

   - ax88796c: use the correct ioctl callback

  Previous releases - always broken:

   - bpf: stop caching subprog index in the bpf_pseudo_func insn

   - security: fixups for the security hooks in sctp

   - nfc: add necessary privilege flags in netlink layer, limit
     operations to admin only

   - vsock: prevent unnecessary refcnt inc for non-blocking connect

   - net/smc: fix sk_refcnt underflow on link down and fallback

   - nfnetlink_queue: fix OOB when mac header was cleared

   - can: j1939: ignore invalid messages per standard

   - bpf, sockmap:
      - fix race in ingress receive verdict with redirect to self
      - fix incorrect sk_skb data_end access when src_reg = dst_reg
      - strparser, and tls are reusing qdisc_skb_cb and colliding

   - ethtool: fix ethtool msg len calculation for pause stats

   - vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries to
     access an unregistering real_dev

   - udp6: make encap_rcv() bump the v6 not v4 stats

   - drv: prestera: add explicit padding to fix m68k build

   - drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge

   - drv: mvpp2: fix wrong SerDes reconfiguration order

  Misc & small latecomers:

   - ipvs: auto-load ipvs on genl access

   - mctp: sanity check the struct sockaddr_mctp padding fields

   - libfs: support RENAME_EXCHANGE in simple_rename()

   - avoid double accounting for pure zerocopy skbs"

* tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (123 commits)
  selftests/net: udpgso_bench_rx: fix port argument
  net: wwan: iosm: fix compilation warning
  cxgb4: fix eeprom len when diagnostics not implemented
  net: fix premature exit from NAPI state polling in napi_disable()
  net/smc: fix sk_refcnt underflow on linkdown and fallback
  net/mlx5: Lag, fix a potential Oops with mlx5_lag_create_definer()
  gve: fix unmatched u64_stats_update_end()
  net: ethernet: lantiq_etop: Fix compilation error
  selftests: forwarding: Fix packet matching in mirroring selftests
  vsock: prevent unnecessary refcnt inc for nonblocking connect
  net: marvell: mvpp2: Fix wrong SerDes reconfiguration order
  net: ethernet: ti: cpsw_ale: Fix access to un-initialized memory
  net: stmmac: allow a tc-taprio base-time of zero
  selftests: net: test_vxlan_under_vrf: fix HV connectivity test
  net: hns3: allow configure ETS bandwidth of all TCs
  net: hns3: remove check VF uc mac exist when set by PF
  net: hns3: fix some mac statistics is always 0 in device version V2
  net: hns3: fix kernel crash when unload VF while it is being reset
  net: hns3: sync rx ring head in echo common pull
  net: hns3: fix pfc packet number incorrect after querying pfc parameters
  ...
2021-11-11 09:49:36 -08:00
M Chetan Kumar
29cd386750 net: wwan: iosm: fix compilation warning
curr_phase is unused. Removed the dead code.

Fixes: 8d9be06341 ("net: wwan: iosm: transport layer support for fw flashing/cd")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Reviewed-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-11 11:45:44 +00:00
Rahul Lakkireddy
4ca110bf8d cxgb4: fix eeprom len when diagnostics not implemented
Ensure diagnostics monitoring support is implemented for the SFF 8472
compliant port module and set the correct length for ethtool port
module eeprom read.

Fixes: f56ec6766d ("cxgb4: Add support for ethtool i2c dump")
Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-11 11:42:13 +00:00
Dan Carpenter
c7ebe23cee net/mlx5: Lag, fix a potential Oops with mlx5_lag_create_definer()
There is a minus character missing from ERR_PTR(ENOMEM) so if this
allocation fails it will lead to an Oops in the caller.

Fixes: dc48516ec7 ("net/mlx5: Lag, add support to create definers for LAG")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:43:20 +00:00
Dan Carpenter
721111b1b2 gve: fix unmatched u64_stats_update_end()
The u64_stats_update_end() call is supposed to be inside the curly
braces so it pairs with the u64_stats_update_begin().

Fixes: 37149e9374 ("gve: Implement packet continuation for RX.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:42:25 +00:00
Aleksander Jan Bajkowski
68eabc3481 net: ethernet: lantiq_etop: Fix compilation error
This fixes the error detected when compiling the driver.

Fixes: 14d4e308e0 ("net: lantiq: configure the burst length in ethernet drivers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:39:54 +00:00
Marek Behún
bb7bbb6e36 net: marvell: mvpp2: Fix wrong SerDes reconfiguration order
Commit bfe301ebbc ("net: mvpp2: convert to use
mac_prepare()/mac_finish()") introduced a bug wherein it leaves the MAC
RESET register asserted after mac_finish(), due to wrong order of
function calls.

Before it was:
  .mac_config()
    mvpp22_mode_reconfigure()
      assert reset
    mvpp2_xlg_config()
      deassert reset

Now it is:
  .mac_prepare()
  .mac_config()
    mvpp2_xlg_config()
      deassert reset
  .mac_finish()
    mvpp2_xlg_config()
      assert reset

Obviously this is wrong.

This bug is triggered when phylink tries to change the PHY interface
mode from a GMAC mode (sgmii, 1000base-x, 2500base-x) to XLG mode
(10gbase-r, xaui). The XLG mode does not work since reset is left
asserted. Only after
  ifconfig down && ifconfig up
is called will the XLG mode work.

Move the call to mvpp22_mode_reconfigure() to .mac_prepare()
implementation. Since some of the subsequent functions need to know
whether the interface is being changed, we unfortunately also need to
pass around the new interface mode before setting port->phy_interface.

Fixes: bfe301ebbc ("net: mvpp2: convert to use mac_prepare()/mac_finish()")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:34:02 +00:00
Christophe JAILLET
7a166854b4 net: ethernet: ti: cpsw_ale: Fix access to un-initialized memory
It is spurious to allocate a bitmap without initializing it.
So, better safe than sorry, initialize it to 0 at least to have some known
values.

While at it, switch to the devm_bitmap_ API which is less verbose.

Fixes: 4b41d34367 ("net: ethernet: ti: cpsw: allow untagged traffic on host port")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:33:04 +00:00
Vladimir Oltean
f64ab8e4f3 net: stmmac: allow a tc-taprio base-time of zero
Commit fe28c53ed7 ("net: stmmac: fix taprio configuration when
base_time is in the past") allowed some base time values in the past,
but apparently not all, the base-time value of 0 (Jan 1st 1970) is still
explicitly denied by the driver.

Remove the bogus check.

Fixes: b60189e039 ("net: stmmac: Integrate EST with TAPRIO scheduler API")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:32:15 +00:00
Guangbin Huang
688db0c7a4 net: hns3: allow configure ETS bandwidth of all TCs
Currently, driver only allow configuring ETS bandwidth of TCs according
to the max TC number queried from firmware. However, the hardware actually
supports 8 TCs and users may need to configure ETS bandwidth of all TCs,
so remove the restriction.

Fixes: 330baff542 ("net: hns3: add ETS TC weight setting in SSU module")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:20:43 +00:00
Guangbin Huang
91fcc79bff net: hns3: remove check VF uc mac exist when set by PF
If users set unicast mac address for VFs by PF, they need to guarantee all
VFs' address is different. This patch removes the check mac address exist
of VFs, for usrs can refresh mac addresses of all VFs directly without
need to modify the exist mac address to other value firstly.

Fixes: 8e6de441b8 ("net: hns3: add support for configuring VF MAC from the host")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:20:43 +00:00
Guangbin Huang
1122eac194 net: hns3: fix some mac statistics is always 0 in device version V2
When driver queries the register number of mac statistics from firmware,
the old firmware runs in device version V2 only returns number of valid
registers, not include number of three reserved registers among of them.
It cause driver doesn't record the last three data when query mac
statistics.

To fix this problem, driver never query register number in device version
V2 and set it to a fixed value which include three reserved registers.

Fixes: c8af2887c9 ("net: hns3: add support pause/pfc durations for mac statistics")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:20:43 +00:00
Yufeng Mo
e140c7983e net: hns3: fix kernel crash when unload VF while it is being reset
When fully configure VLANs for a VF, then unload the VF while
triggering a reset to PF, will cause a kernel crash because the
irq is already uninit.

[ 293.177579] ------------[ cut here ]------------
[ 293.183502] kernel BUG at drivers/pci/msi.c:352!
[ 293.189547] Internal error: Oops - BUG: 0 [#1] SMP
......
[ 293.390124] Workqueue: hclgevf hclgevf_service_task [hclgevf]
[ 293.402627] pstate: 80c00009 (Nzcv daif +PAN +UAO)
[ 293.414324] pc : free_msi_irqs+0x19c/0x1b8
[ 293.425429] lr : free_msi_irqs+0x18c/0x1b8
[ 293.436545] sp : ffff00002716fbb0
[ 293.446950] x29: ffff00002716fbb0 x28: 0000000000000000
[ 293.459519] x27: 0000000000000000 x26: ffff45b91ea16b00
[ 293.472183] x25: 0000000000000000 x24: ffffa587b08f4700
[ 293.484717] x23: ffffc591ac30e000 x22: ffffa587b08f8428
[ 293.497190] x21: ffffc591ac30e300 x20: 0000000000000000
[ 293.509594] x19: ffffa58a062a8300 x18: 0000000000000000
[ 293.521949] x17: 0000000000000000 x16: ffff45b91dcc3f48
[ 293.534013] x15: 0000000000000000 x14: 0000000000000000
[ 293.545883] x13: 0000000000000040 x12: 0000000000000228
[ 293.557508] x11: 0000000000000020 x10: 0000000000000040
[ 293.568889] x9 : ffff45b91ea1e190 x8 : ffffc591802d0000
[ 293.580123] x7 : ffffc591802d0148 x6 : 0000000000000120
[ 293.591190] x5 : ffffc591802d0000 x4 : 0000000000000000
[ 293.602015] x3 : 0000000000000000 x2 : 0000000000000000
[ 293.612624] x1 : 00000000000004a4 x0 : ffffa58a1e0c6b80
[ 293.623028] Call trace:
[ 293.630340] free_msi_irqs+0x19c/0x1b8
[ 293.638849] pci_disable_msix+0x118/0x140
[ 293.647452] pci_free_irq_vectors+0x20/0x38
[ 293.656081] hclgevf_uninit_msi+0x44/0x58 [hclgevf]
[ 293.665309] hclgevf_reset_rebuild+0x1ac/0x2e0 [hclgevf]
[ 293.674866] hclgevf_reset+0x358/0x400 [hclgevf]
[ 293.683545] hclgevf_reset_service_task+0xd0/0x1b0 [hclgevf]
[ 293.693325] hclgevf_service_task+0x4c/0x2e8 [hclgevf]
[ 293.702307] process_one_work+0x1b0/0x448
[ 293.710034] worker_thread+0x54/0x468
[ 293.717331] kthread+0x134/0x138
[ 293.724114] ret_from_fork+0x10/0x18
[ 293.731324] Code: f940b000 b4ffff00 a903e7b8 f90017b6 (d4210000)

This patch fixes the problem by waiting for the VF reset done
while unloading the VF.

Fixes: e2cb1dec97 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:20:43 +00:00
Yufeng Mo
3b6db4a049 net: hns3: sync rx ring head in echo common pull
When the driver processes rx packets, the head pointer is updated only
after the number of received packets reaches 16. However, hardware
relies on the head pointer to calculate the number of FBDs. As a result,
the hardware calculates the FBD incorrectly. Therefore, the driver
proactively updates the head pointer in each common poll to ensure that
the number of FBDs calculated by the hardware is correct.

Fixes: 68752b24f5 ("net: hns3: schedule the polling again when allocation fails")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:20:43 +00:00
Jie Wang
0b653a81a2 net: hns3: fix pfc packet number incorrect after querying pfc parameters
Currently, driver will send command to firmware to query pfc packet number
when user uses dcb tool to get pfc parameters. However, the periodic
service task will also periodically query and record MAC statistics,
including pfc packet number.

As the hardware registers of statistics is cleared after reading, it will
cause pfc packet number of MAC statistics are not correct after using dcb
tool to get pfc parameters.

To fix this problem, when user uses dcb tool to get pfc parameters, driver
updates MAC statistics firstly and then get pfc packet number from MAC
statistics.

Fixes: 64fd2300fc ("net: hns3: add support for querying pfc puase packets statistic")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:20:43 +00:00
Jie Wang
beb27ca451 net: hns3: fix ROCE base interrupt vector initialization bug
Currently, NIC init ROCE interrupt vector with MSIX interrupt. But ROCE use
pci_irq_vector() to get interrupt vector, which adds the relative interrupt
vector again and gets wrong interrupt vector.

So fixes it by assign relative interrupt vector to ROCE instead of MSIX
interrupt vector and delete the unused struct member base_msi_vector
declaration of hclgevf_dev.

Fixes: 46a3df9f97 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:20:43 +00:00
Guangbin Huang
3b4c6566c1 net: hns3: fix failed to add reuse multicast mac addr to hardware when mc mac table is full
Currently, when driver is failed to add a new multicast mac address to
hardware due to the multicast mac table is full, it will directly return.
In this case, if the multicast mac list has some reuse addresses after the
new address, those reuse addresses will never be added to hardware.

To fix this problem, if function hclge_add_mc_addr_common() returns
-ENOSPC, hclge_sync_vport_mac_list() should judge whether continue or
stop to add next address.

As function hclge_sync_vport_mac_list() needs parameter mac_type to know
whether is uc or mc, refine this function to add parameter mac_type and
remove parameter sync. So does function hclge_unsync_vport_mac_list().

Fixes: ee4bcd3b7a ("net: hns3: refactor the MAC address configure")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-10 14:20:43 +00:00
Carl Huang
b2beffa7d9 ath11k: enable 802.11 power save mode in station mode
To reduce power consumption enable 802.11 power save mode in station mode. This
allows both radio and CPU to sleep more.

Only enable the mode on QCA6390 and WCN6855, it's unknown how other hardware
families support this feature.

To test that power save mode is running run "iw dev wls1 set power_save off",
check there is no NULL Data frame seen by a sniffer. And run "iw dev wls1 set power_save
on" and check there is a NULL Data frame in sniffer.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <cjhuang@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211108123826.8463-2-kvalo@codeaurora.org
2021-11-10 14:40:38 +02:00
Kalle Valo
af3d89649b ath11k: convert ath11k_wmi_pdev_set_ps_mode() to use enum wmi_sta_ps_mode
It's more descriptive to use the actual enum used by the firmware instead of a
boolean so change ath11k_wmi_pdev_set_ps_mode() to use a boolean.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211108123826.8463-1-kvalo@codeaurora.org
2021-11-10 14:40:37 +02:00
Colin Ian King
8f1bc38bbb net: mana: Fix spelling mistake "calledd" -> "called"
There is a spelling mistake in a dev_info message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/20211108201817.43121-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 19:16:55 -08:00
Taehee Yoo
43aa493799 amt: use cancel_delayed_work() instead of flush_delayed_work() in amt_fini()
When the amt module is being removed, it calls flush_delayed_work() to exit
source_gc_wq. But it wouldn't be exited properly because the
amt_source_gc_work(), which is the callback function of source_gc_wq
internally calls mod_delayed_work() again.
So, amt_source_gc_work() would be called after the amt module is removed.
Therefore kernel panic would occur.
In order to avoid it, cancel_delayed_work() should be used instead of
flush_delayed_work().

Test commands:
   modprobe amt
   modprobe -rv amt

Splat looks like:
 BUG: unable to handle page fault for address: fffffbfff80f50db
 #PF: supervisor read access in kernel mode
 #PF: error_code(0x0000) - not-present page
 PGD 1237ee067 P4D 1237ee067 PUD 1237b2067 PMD 100c11067 PTE 0
 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC KASAN PTI
 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.15.0+ #27
 5a0ebebc29fe5c40c68bea90197606c3a832b09f
 RIP: 0010:run_timer_softirq+0x221/0xfc0
 Code: 00 00 4c 89 e1 4c 8b 30 48 c1 e9 03 80 3c 29 00 0f 85 ed 0b 00 00
 4d 89 34 24 4d 85 f6 74 19 49 8d 7e 08 48 89 f9 48 c1 e9 03 <80> 3c 29 00
 0f 85 fa 0b 00 00 4d 89 66 08 83 04 24 01 49 89 d4 48
 RSP: 0018:ffff888119009e50 EFLAGS: 00010806
 RAX: ffff8881191f8a80 RBX: 00000000007ffe2a RCX: 1ffffffff80f50db
 RDX: ffff888119009ed0 RSI: 0000000000000008 RDI: ffffffffc07a86d8
 RBP: dffffc0000000000 R08: ffff8881191f8280 R09: ffffed102323f061
 R10: ffff8881191f8307 R11: ffffed102323f060 R12: ffff888119009ec8
 R13: 00000000000000c0 R14: ffffffffc07a86d0 R15: ffff8881191f82e8
 FS:  0000000000000000(0000) GS:ffff888119000000(0000)
 knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: fffffbfff80f50db CR3: 00000001062dc002 CR4: 00000000003706e0
 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
 Call Trace:
  <IRQ>
  ? add_timer+0x650/0x650
  ? kvm_clock_read+0x14/0x30
  ? ktime_get+0xb9/0x180
  ? rcu_read_lock_held_common+0xe/0xa0
  ? rcu_read_lock_sched_held+0x56/0xc0
  ? rcu_read_lock_bh_held+0xa0/0xa0
  ? hrtimer_interrupt+0x271/0x790
  __do_softirq+0x1d0/0x88f
  irq_exit_rcu+0xe7/0x120
  sysvec_apic_timer_interrupt+0x8a/0xb0
  </IRQ>
  <TASK>
[ ... ]

Fixes: bc54e49c14 ("amt: add multicast(IGMP) report message handler")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20211108145340.17208-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 19:12:56 -08:00
Marek Behún
dc2fc9f03c net: dsa: mv88e6xxx: Don't support >1G speeds on 6191X on ports other than 10
Model 88E6191X only supports >1G speeds on port 10. Port 0 and 9 are
only 1G.

Fixes: de776d0d31 ("net: dsa: mv88e6xxx: add support for mv88e6393x family")
Signed-off-by: Marek Behún <kabel@kernel.org>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20211104171747.10509-1-kabel@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-09 19:09:12 -08:00
Arnd Bergmann
9758aba854 amt: add IPV6 Kconfig dependency
This driver cannot be built-in if IPV6 is a loadable module:

x86_64-linux-ld: drivers/net/amt.o: in function `amt_build_mld_gq':
amt.c:(.text+0x2e7d): undefined reference to `ipv6_dev_get_saddr'

Add the idiomatic Kconfig dependency that all such modules
have.

Fixes: b9022b53ad ("amt: add control plane of amt interface")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-09 14:00:13 +00:00
Dan Carpenter
1c360cc1cc gve: Fix off by one in gve_tx_timeout()
The priv->ntfy_blocks[] has "priv->num_ntfy_blks" elements so this >
needs to be >= to prevent an off by one bug.  The priv->ntfy_blocks[]
array is allocated in gve_alloc_notify_blocks().

Fixes: 87a7f321bb ("gve: Recover from queue stall due to missed IRQ")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-09 13:58:46 +00:00
Lin Ma
0b9111922b hamradio: defer 6pack kfree after unregister_netdev
There is a possible race condition (use-after-free) like below

 (USE)                       |  (FREE)
  dev_queue_xmit             |
   __dev_queue_xmit          |
    __dev_xmit_skb           |
     sch_direct_xmit         | ...
      xmit_one               |
       netdev_start_xmit     | tty_ldisc_kill
        __netdev_start_xmit  |  6pack_close
         sp_xmit             |   kfree
          sp_encaps          |
                             |

According to the patch "defer ax25 kfree after unregister_netdev", this
patch reorder the kfree after the unregister_netdev to avoid the possible
UAF as the unregister_netdev() is well synchronized and won't return if
there is a running routine.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-09 11:49:12 +00:00
Lin Ma
3e0588c291 hamradio: defer ax25 kfree after unregister_netdev
There is a possible race condition (use-after-free) like below

 (USE)                       |  (FREE)
ax25_sendmsg                 |
 ax25_queue_xmit             |
  dev_queue_xmit             |
   __dev_queue_xmit          |
    __dev_xmit_skb           |
     sch_direct_xmit         | ...
      xmit_one               |
       netdev_start_xmit     | tty_ldisc_kill
        __netdev_start_xmit  |  mkiss_close
         ax_xmit             |   kfree
          ax_encaps          |
                             |

Even though there are two synchronization primitives before the kfree:
1. wait_for_completion(&ax->dead). This can prevent the race with
routines from mkiss_ioctl. However, it cannot stop the routine coming
from upper layer, i.e., the ax25_sendmsg.

2. netif_stop_queue(ax->dev). It seems that this line of code aims to
halt the transmit queue but it fails to stop the routine that already
being xmit.

This patch reorder the kfree after the unregister_netdev to avoid the
possible UAF as the unregister_netdev() is well synchronized and won't
return if there is a running routine.

Signed-off-by: Lin Ma <linma@zju.edu.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-09 11:48:39 +00:00
Jean Sacren
54f0bad668 net: sungem_phy: fix code indentation
Remove extra space in front of the return statement.

Fixes: eb5b5b2ff9 ("sungem_phy: support bcm5461 phy, autoneg.")
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-09 11:45:54 +00:00
Linus Torvalds
d20f7a09e5 gpio updates for v5.16
- new driver: gpio-modepin (plus relevant change in zynqmp firmware)
 - add interrupt support to gpio-virtio
 - enable the 'gpio-line-names' property in the DT bindings for gpio-rockchip
 - use the subsystem helpers where applicable in gpio-uniphier instead of
   accessing IRQ structures directly
 - code shrink in gpio-xilinx
 - add interrupt to gpio-mlxbf2 (and include the removal of custom interrupt
   code from the mellanox ethernet driver)
 - support multiple interrupts per bank in gpio-tegra186 (and force one interrupt
   per bank in older models)
 - fix GPIO line IRQ offset calculation in gpio-realtek-otto
 - drop unneeded MODULE_ALIAS expansions in multiple drivers
 - code cleanup in gpio-aggregator
 - minor improvements in gpio-max730x and gpio-mc33880
 - Kconfig cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAmGJH+MACgkQEacuoBRx
 13JjGg//YKoAby35hcclft5xJYDwnx2or001TJ+nFLOQ9d24gUI7+UMFVnZ2ifMP
 9F/yO0934pkHNUqcTuIMbeALW6Cg2DglXJFCQSXT6Ng5ETjENOhLHRa4bRdoIEim
 HC+YJg/DS6CpSkMAH09ljZfkTPz3B2DHt+Y4phIDg2PIrt+UUsN/RC685B4jSwds
 pcAwdP1mqBV1da8uRjtfc7UcFSxR6/lvBBWQSo9RAEse5R6Rmm7XIOKBlQ+Exdts
 jAmVqxz7BnfuYug9Y3y3fOiAQYoRvZBaSjkeMJALub3GEd3W30vAKoQhq7gC9ea3
 XvCj7V6C59JVp9aQUXo1cL6VqcesSGMWoRi2vll8/7gluXV2gCoNPVb+9KwxG9Ed
 +xwXBpCsOVQCXl8jgIHBWNfxOS31wafWlK8Ng42Cjov+uQfsccgufTvhQXBumKbM
 oECSOgjg9k3/AMpym3buOgAzqSec5R1iiSWHNPT+P6cSFXa2Bl3A8X0RgF/TwXPC
 Bn9BDfSiYfOcD6y6yx2GPMCrCXNJRWgfJ/2j3Jsb66XtGwtBDhmK7rcqcg9qIws9
 mWWyISiJgO0gfk24hIIw7OxeKCidm3iVskryJAQUfTX+BBcR5nZfiuF3EeDXZv95
 whkSoN7J5fmMYDDJ7wd0pFwbW5fe5C/i/2tjOlNBgdXsNgAv/r4=
 =mKh0
 -----END PGP SIGNATURE-----

Merge tag 'gpio-updates-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

Pull gpio updates from Bartosz Golaszewski:
 "We have a single new driver, new features in others and some cleanups
  all over the place.

  Nothing really stands out and it is all relatively small.

   - new driver: gpio-modepin (plus relevant change in zynqmp firmware)

   - add interrupt support to gpio-virtio

   - enable the 'gpio-line-names' property in the DT bindings for
     gpio-rockchip

   - use the subsystem helpers where applicable in gpio-uniphier instead
     of accessing IRQ structures directly

   - code shrink in gpio-xilinx

   - add interrupt to gpio-mlxbf2 (and include the removal of custom
     interrupt code from the mellanox ethernet driver)

   - support multiple interrupts per bank in gpio-tegra186 (and force
     one interrupt per bank in older models)

   - fix GPIO line IRQ offset calculation in gpio-realtek-otto

   - drop unneeded MODULE_ALIAS expansions in multiple drivers

   - code cleanup in gpio-aggregator

   - minor improvements in gpio-max730x and gpio-mc33880

   - Kconfig cleanups"

* tag 'gpio-updates-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  virtio_gpio: drop packed attribute
  gpio: virtio: Add IRQ support
  gpio: realtek-otto: fix GPIO line IRQ offset
  gpio: clean up Kconfig file
  net: mellanox: mlxbf_gige: Replace non-standard interrupt handling
  gpio: mlxbf2: Introduce IRQ support
  gpio: mc33880: Drop if with an always false condition
  gpio: max730x: Make __max730x_remove() return void
  gpio: aggregator: Wrap access to gpiochip_fwd.tmp[]
  gpio: modepin: Add driver support for modepin GPIO controller
  dt-bindings: gpio: zynqmp: Add binding documentation for modepin
  firmware: zynqmp: Add MMIO read and write support for PS_MODE pin
  gpio: tps65218: drop unneeded MODULE_ALIAS
  gpio: max77620: drop unneeded MODULE_ALIAS
  gpio: xilinx: simplify getting .driver_data
  gpio: tegra186: Support multiple interrupts per bank
  gpio: tegra186: Force one interrupt per bank
  gpio: uniphier: Use helper functions to get private data from IRQ data
  gpio: uniphier: Use helper function to get IRQ hardware number
  dt-bindings: gpio: add gpio-line-names to rockchip,gpio-bank.yaml
2021-11-08 11:55:21 -08:00
Benjamin Li
cfdf6b19e7 wcn36xx: fix RX BD rate mapping for 5GHz legacy rates
The linear mapping between the BD rate field and the driver's 5GHz
legacy rates table (wcn_5ghz_rates) does not only apply for the latter
four rates -- it applies to all eight rates.

Fixes: 6ea131acea ("wcn36xx: Fix warning due to bad rate_idx")
Signed-off-by: Benjamin Li <benl@squareup.com>
Tested-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211104010548.1107405-3-benl@squareup.com
2021-11-08 15:22:52 +02:00
Benjamin Li
c9c5608faf wcn36xx: populate band before determining rate on RX
status.band is used in determination of status.rate -- for 5GHz on legacy
rates there is a linear shift between the BD descriptor's rate field and
the wcn36xx driver's rate table (wcn_5ghz_rates).

We have a special clause to populate status.band for hardware scan offload
frames. However, this block occurs after status.rate is already populated.
Correctly handle this dependency by moving the band block before the rate
block.

This patch addresses kernel warnings & missing scan results for 5GHz APs
that send their beacons/probe responses at the higher four legacy rates
(24-54 Mbps), when using hardware scan offload:

  ------------[ cut here ]------------
  WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:4532 ieee80211_rx_napi+0x744/0x8d8
  Modules linked in: wcn36xx [...]
  CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         4.19.107-g73909fa #1
  Hardware name: Square, Inc. T2 (all variants) (DT)
  Call trace:
  dump_backtrace+0x0/0x148
  show_stack+0x14/0x1c
  dump_stack+0xb8/0xf0
  __warn+0x2ac/0x2d8
  warn_slowpath_null+0x44/0x54
  ieee80211_rx_napi+0x744/0x8d8
  ieee80211_tasklet_handler+0xa4/0xe0
  tasklet_action_common+0xe0/0x118
  tasklet_action+0x20/0x28
  __do_softirq+0x108/0x1ec
  irq_exit+0xd4/0xd8
  __handle_domain_irq+0x84/0xbc
  gic_handle_irq+0x4c/0xb8
  el1_irq+0xe8/0x190
  lpm_cpuidle_enter+0x220/0x260
  cpuidle_enter_state+0x114/0x1c0
  cpuidle_enter+0x34/0x48
  do_idle+0x150/0x268
  cpu_startup_entry+0x20/0x24
  rest_init+0xd4/0xe0
  start_kernel+0x398/0x430
  ---[ end trace ae28cb759352b403 ]---

Fixes: 8a27ca3947 ("wcn36xx: Correct band/freq reporting on RX")
Signed-off-by: Benjamin Li <benl@squareup.com>
Tested-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211104010548.1107405-2-benl@squareup.com
2021-11-08 15:22:51 +02:00
Bryan O'Donoghue
ed04ea76e6 wcn36xx: Put DXE block into reset before freeing memory
When deiniting the DXE hardware we should reset the block to ensure there
is no spurious DMA write transaction from the downstream WCNSS to upstream
MSM at a skbuff address we will have released.

Fixes: 8e84c25821 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211105122152.1580542-4-bryan.odonoghue@linaro.org
2021-11-08 15:21:17 +02:00
Bryan O'Donoghue
3652096e52 wcn36xx: Release DMA channel descriptor allocations
When unloading the driver we are not releasing the DMA descriptors which we
previously allocated.

Fixes: 8e84c25821 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211105122152.1580542-3-bryan.odonoghue@linaro.org
2021-11-08 15:21:16 +02:00
Bryan O'Donoghue
89dcb1da61 wcn36xx: Fix DMA channel enable/disable cycle
Right now we have a broken sequence where we enable DMA channel interrupts
which can be left enabled and never disabled if we hit an error path.

Worse still when we unload the driver, the DMA channel interrupt bits are
left intact. About the only saving grace here is that we do remember to
disable the wcnss interrupt when unload the driver.

Fixes: 8e84c25821 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20211105122152.1580542-2-bryan.odonoghue@linaro.org
2021-11-08 15:21:15 +02:00
Christophe JAILLET
c45231a766 litex_liteeth: Fix a double free in the remove function
'netdev' is a managed resource allocated in the probe using
'devm_alloc_etherdev()'.
It must not be freed explicitly in the remove function.

Fixes: ee7da21ac4 ("net: Add driver for LiteX's LiteETH network interface")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-07 21:51:17 +00:00
Volodymyr Mytnyk
e1464db5c5 net: marvell: prestera: fix hw structure laid out
The prestera FW v4.0 support commit has been merged
accidentally w/o review comments addressed and waiting
for the final patch set to be uploaded. So, fix the remaining
comments related to structure laid out and build issues.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: bb5dbf2cc6 ("net: marvell: prestera: add firmware v4.0 support")
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-07 19:33:55 +00:00
Randy Dunlap
85879f131d net: hisilicon: fix hsn3_ethtool kernel-doc warnings
Fix kernel-doc warnings and spacing in hns3_ethtool.c:

hns3_ethtool.c:246: warning: No description found for return value of 'hns3_lp_run_test'
hns3_ethtool.c:408: warning: expecting prototype for hns3_nic_self_test(). Prototype was for hns3_self_test() instead

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Peng Li <lipeng321@huawei.com>
Cc: Guangbin Huang <huangguangbin2@huawei.com>
Cc: Yisen Zhuang <yisen.zhuang@huawei.com>
Cc: Salil Mehta <salil.mehta@huawei.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-07 19:17:36 +00:00
Linus Torvalds
0c5c62ddf8 pci-v5.16-changes
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAmGFXBkUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vx6Tg/7BsGWm8f+uw/mr9lLm47q2mc4XyoO
 7bR9KDp5NM84W/8ZOU7dqqqsnY0ddrSOLBRyhJJYMW3SwJd1y1ajTBsL1Ujqv+eN
 z+JUFmhq4Laqm4k6Spc9CEJE+Ol5P6gGUtxLYo6PM2R0VxnSs/rDxctT5i7YOpCi
 COJ+NVT/mc/by2loz1kLTSR9GgtBBgd+Y8UA33GFbHKssROw02L0OI3wffp81Oba
 EhMGPoD+0FndAniDw+vaOSoO+YaBuTfbM92T/O00mND69Fj1PWgmNWZz7gAVgsXb
 3RrNENUFxgw6CDt7LZWB8OyT04iXe0R2kJs+PA9gigFCGbypwbd/Nbz5M7e9HUTR
 ray+1EpZib6+nIksQBL2mX8nmtyHMcLiM57TOEhq0+ECDO640MiRm8t0FIG/1E8v
 3ZYd9w20o/NxlFNXHxxpZ3D/osGH5ocyF5c5m1rfB4RGRwztZGL172LWCB0Ezz9r
 eHB8sWxylxuhrH+hp2BzQjyddg7rbF+RA4AVfcQSxUpyV01hoRocKqknoDATVeLH
 664nJIINFxKJFwfuL3E6OhrInNe1LnAhCZsHHqbS+NNQFgvPRznbixBeLkI9dMf5
 Yf6vpsWO7ur8lHHbRndZubVu8nxklXTU7B/w+C11sq6k9LLRJSHzanr3Fn9WA80x
 sznCxwUvbTCu1r0=
 =nsMh
 -----END PGP SIGNATURE-----

Merge tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:
   - Conserve IRQs by setting up portdrv IRQs only when there are users
     (Jan Kiszka)
   - Rework and simplify _OSC negotiation for control of PCIe features
     (Joerg Roedel)
   - Remove struct pci_dev.driver pointer since it's redundant with the
     struct device.driver pointer (Uwe Kleine-König)

  Resource management:
   - Coalesce contiguous host bridge apertures from _CRS to accommodate
     BARs that cover more than one aperture (Kai-Heng Feng)

  Sysfs:
   - Check CAP_SYS_ADMIN before parsing user input (Krzysztof
     Wilczyński)
   - Return -EINVAL consistently from "store" functions (Krzysztof
     Wilczyński)
   - Use sysfs_emit() in endpoint "show" functions to avoid buffer
     overruns (Kunihiko Hayashi)

  PCIe native device hotplug:
   - Ignore Link Down/Up caused by resets during error recovery so
     endpoint drivers can remain bound to the device (Lukas Wunner)

  Virtualization:
   - Avoid bus resets on Atheros QCA6174, where they hang the device
     (Ingmar Klein)
   - Work around Pericom PI7C9X2G switch packet drop erratum by using
     store and forward mode instead of cut-through (Nathan Rossi)
   - Avoid trying to enable AtomicOps on VFs; the PF setting applies to
     all VFs (Selvin Xavier)

  MSI:
   - Document that /sys/bus/pci/devices/.../irq contains the legacy INTx
     interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry
     Song)

  VPD:
   - Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere
     in the possible VPD space; use these to simplify the cxgb3 driver
     (Heiner Kallweit)

  Peer-to-peer DMA:
   - Add (not subtract) the bus offset when calculating DMA address
     (Wang Lu)

  ASPM:
   - Re-enable LTR at Downstream Ports so they don't report Unsupported
     Requests when reset or hot-added devices send LTR messages
     (Mingchuang Qiao)

  Apple PCIe controller driver:
   - Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc
     Zyngier)

  Cadence PCIe controller driver:
   - Return success when probe succeeds instead of falling into error
     path (Li Chen)

  HiSilicon Kirin PCIe controller driver:
   - Reorganize PHY logic and add support for external PHY drivers
     (Mauro Carvalho Chehab)
   - Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro
     Carvalho Chehab)
   - Add Kirin 970 support (Mauro Carvalho Chehab)
   - Make driver removable (Mauro Carvalho Chehab)

  Intel VMD host bridge driver:
   - If IOMMU supports interrupt remapping, leave VMD MSI-X remapping
     enabled (Adrian Huang)
   - Number each controller so we can tell them apart in
     /proc/interrupts (Chunguang Xu)
   - Avoid building on UML because VMD depends on x86 bare metal APIs
     (Johannes Berg)

  Marvell Aardvark PCIe controller driver:
   - Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár)
   - Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár)
   - Downgrade PIO Response Status messages to debug level (Marek Behún)
   - Preserve CRS SV (Config Request Retry Software Visibility) bit in
     emulated Root Control register (Pali Rohár)
   - Fix issue in configuring reference clock (Pali Rohár)
   - Don't clear status bits for masked interrupts (Pali Rohár)
   - Don't mask unused interrupts (Pali Rohár)
   - Avoid code repetition in advk_pcie_rd_conf() (Marek Behún)
   - Retry config accesses on CRS response (Pali Rohár)
   - Simplify emulated Root Capabilities initialization (Pali Rohár)
   - Fix several link training issues (Pali Rohár)
   - Fix link-up checking via LTSSM (Pali Rohár)
   - Fix reporting of Data Link Layer Link Active (Pali Rohár)
   - Fix emulation of W1C bits (Marek Behún)
   - Fix MSI domain .alloc() method to return zero on success (Marek
     Behún)
   - Read entire 16-bit MSI vector in MSI handler, not just low 8 bits
     (Marek Behún)
   - Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits
     at startup; PCI core will set those as necessary (Pali Rohár)
   - When operating as a Root Port, set class code to "PCI Bridge"
     instead of the default "Mass Storage Controller" (Pali Rohár)
   - Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't
     implement this per spec (Pali Rohár)
   - Add emulation of option ROM BAR since aardvark doesn't implement
     this per spec (Pali Rohár)

  MediaTek MT7621 PCIe controller driver:
   - Add MediaTek MT7621 PCIe host controller driver and DT binding
     (Sergio Paracuellos)

  Qualcomm PCIe controller driver:
   - Add SC8180x compatible string (Bjorn Andersson)
   - Add endpoint controller driver and DT binding (Manivannan
     Sadhasivam)
   - Restructure to use of_device_get_match_data() (Prasad Malisetty)
   - Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty)

  Renesas R-Car PCIe controller driver:
   - Remove unnecessary includes (Geert Uytterhoeven)

  Rockchip DesignWare PCIe controller driver:
   - Add DT binding (Simon Xue)

  Socionext UniPhier Pro5 controller driver:
   - Serialize INTx masking/unmasking (Kunihiko Hayashi)

  Synopsys DesignWare PCIe controller driver:
   - Run dwc .host_init() method before registering MSI interrupt
     handler so we can deal with pending interrupts left by bootloader
     (Bjorn Andersson)
   - Clean up Kconfig dependencies (Andy Shevchenko)
   - Export symbols to allow more modular drivers (Luca Ceresoli)

  TI DRA7xx PCIe controller driver:
   - Allow host and endpoint drivers to be modules (Luca Ceresoli)
   - Enable external clock if present (Luca Ceresoli)

  TI J721E PCIe driver:
   - Disable PHY when probe fails after initializing it (Christophe
     JAILLET)

  MicroSemi Switchtec management driver:
   - Return error to application when command execution fails because an
     out-of-band reset has cleared the device BARs, Memory Space Enable,
     etc (Kelvin Cao)
   - Fix MRPC error status handling issue (Kelvin Cao)
   - Mask out other bits when reading of management VEP instance ID
     (Kelvin Cao)
   - Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions
     (Kelvin Cao)
   - Add check of event support (Logan Gunthorpe)

  Miscellaneous:
   - Remove unused pci_pool wrappers, which have been replaced by
     dma_pool (Cai Huoqing)
   - Use 'unsigned int' instead of bare 'unsigned' (Krzysztof
     Wilczyński)
   - Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof
     Wilczyński)
   - Fix some sscanf(), sprintf() format mismatches (Krzysztof
     Wilczyński)
   - Update PCI subsystem information in MAINTAINERS (Krzysztof
     Wilczyński)
   - Correct some misspellings (Krzysztof Wilczyński)"

* tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits)
  PCI: Add ACS quirk for Pericom PI7C9X2G switches
  PCI: apple: Configure RID to SID mapper on device addition
  iommu/dart: Exclude MSI doorbell from PCIe device IOVA range
  PCI: apple: Implement MSI support
  PCI: apple: Add INTx and per-port interrupt support
  PCI: kirin: Allow removing the driver
  PCI: kirin: De-init the dwc driver
  PCI: kirin: Disable clkreq during poweroff sequence
  PCI: kirin: Move the power-off code to a common routine
  PCI: kirin: Add power_off support for Kirin 960 PHY
  PCI: kirin: Allow building it as a module
  PCI: kirin: Add MODULE_* macros
  PCI: kirin: Add Kirin 970 compatible
  PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge
  PCI: apple: Set up reference clocks when probing
  PCI: apple: Add initial hardware bring-up
  PCI: of: Allow matching of an interrupt-map local to a PCI device
  of/irq: Allow matching of an interrupt-map local to an interrupt controller
  irqdomain: Make of_phandle_args_to_fwspec() generally available
  PCI: Do not enable AtomicOps on VFs
  ...
2021-11-06 14:36:12 -07:00
Marc Kleine-Budde
69c55f6e76 can: mcp251xfd: mcp251xfd_chip_start(): fix error handling for mcp251xfd_chip_rx_int_enable()
This patch fixes the error handling for mcp251xfd_chip_rx_int_enable().
Instead just returning the error, properly shut down the chip.

Link: https://lore.kernel.org/all/20211106201526.44292-2-mkl@pengutronix.de
Fixes: 55e5b97f00 ("can: mcp25xxfd: add driver for Microchip MCP25xxFD SPI CAN")
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-11-06 21:25:25 +01:00
Marc Kleine-Budde
691204bd66 can: mcp251xfd: mcp251xfd_irq(): add missing can_rx_offload_threaded_irq_finish() in case of bus off
The function can_rx_offload_threaded_irq_finish() is needed to trigger
the NAPI thread to deliver read CAN frames to the networking stack.

This patch adds the missing call to can_rx_offload_threaded_irq_finish()
in case of a bus off, before leaving the interrupt handler to avoid
packet starvation.

Link: https://lore.kernel.org/all/20211106201526.44292-1-mkl@pengutronix.de
Fixes: 30bfec4fec ("can: rx-offload: can_rx_offload_threaded_irq_finish(): add new function to be called from threaded interrupt")
Cc: stable@vger.kernel.org
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-11-06 21:15:32 +01:00
Stephane Grosjean
6b78ba3e51 can: peak_usb: exchange the order of information messages
Proposes the possible update of the PCAN-USB firmware after indicating its
name and current version.

Link: https://lore.kernel.org/all/20211021081505.18223-3-s.grosjean@peak-system.com
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-11-06 17:34:28 +01:00
Stephane Grosjean
3f1c7aa284 can: peak_usb: always ask for BERR reporting for PCAN-USB devices
Since for the PCAN-USB, the management of the transition to the
ERROR_WARNING or ERROR_PASSIVE state is done according to the error
counters, these must be requested unconditionally.

Link: https://lore.kernel.org/all/20211021081505.18223-2-s.grosjean@peak-system.com
Fixes: c11dcee758 ("can: peak_usb: pcan_usb_decode_error(): upgrade handling of bus state changes")
Cc: stable@vger.kernel.org
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-11-06 17:33:44 +01:00
Vincent Mailhol
d9447f768b can: etas_es58x: es58x_rx_err_msg(): fix memory leak in error path
In es58x_rx_err_msg(), if can->do_set_mode() fails, the function
directly returns without calling netif_rx(skb). This means that the
skb previously allocated by alloc_can_err_skb() is not freed. In other
terms, this is a memory leak.

This patch simply removes the return statement in the error branch and
let the function continue.

Issue was found with GCC -fanalyzer, please follow the link below for
details.

Fixes: 8537257874 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces")
Link: https://lore.kernel.org/all/20211026180740.1953265-1-mailhol.vincent@wanadoo.fr
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-11-06 17:29:40 +01:00
Bjorn Helgaas
10d0f97f78 Merge branch 'pci/vpd'
- Add pci_read_vpd_any(), pci_write_vpd_any() to access VPD at arbitrary
  offsets (Heiner Kallweit)

- Use VPD API to replace custom code in cxgb3 driver (Heiner Kallweit)

* pci/vpd:
  cxgb3: Remove seeprom_write and use VPD API
  cxgb3: Use VPD API in t3_seeprom_wp()
  cxgb3: Remove t3_seeprom_read and use VPD API
  PCI/VPD: Use pci_read_vpd_any() in pci_vpd_size()
  PCI/VPD: Add pci_read/write_vpd_any()
2021-11-05 11:28:47 -05:00
Volodymyr Mytnyk
a46a5036e7 net: marvell: prestera: fix patchwork build problems
fix the remaining build issues reported by patchwork
in firmware v4.0 support commit which has been already
merged.

Fix patchwork issues:
 - source inline
 - checkpatch

Fixes: bb5dbf2cc6 ("net: marvell: prestera: add firmware v4.0 support")
Signed-off-by: Volodymyr Mytnyk <vmytnyk@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05 14:26:22 +00:00
Zhang Mingyu
dce981c421 amt: remove duplicate include in amt.c
'net/protocol.h' included in 'drivers/net/amt.c' is duplicated.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Zhang Mingyu <zhang.mingyu@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05 14:24:37 +00:00
Arnd Bergmann
a6785bd7d8 octeontx2-nicvf: fix ioctl callback
The mii ioctls are now handled by the ndo_eth_ioctl() callback,
not the old ndo_do_ioctl(), but octeontx2-nicvf introduced the
function for the old way.

Move it over to ndo_eth_ioctl() to actually allow calling it from
user space.

Fixes: 43510ef4dd ("octeontx2-nicvf: Add PTP hardware clock support to NIX VF")
Fixes: a76053707d ("dev_ioctl: split out ndo_eth_ioctl")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05 14:23:21 +00:00