Commit graph

112,392 commits

Author SHA1 Message Date
Dario Binacchi
92a31782c8 can: slcan: use the alloc_can_skb() helper
It is used successfully by most (if not all) CAN device drivers. It
allows to remove replicated code.

Link: https://lore.kernel.org/all/20220628163137.413025-4-dario.binacchi@amarulasolutions.com
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-03 11:34:21 +02:00
Dario Binacchi
da6788ea02 can: slcan: use netdev helpers to print out messages
Replace printk() calls with corresponding netdev helpers.

Link: https://lore.kernel.org/all/20220628163137.413025-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-03 11:34:18 +02:00
Dario Binacchi
3cd864901b can: slcan: use the BIT() helper
Use the BIT() helper instead of an explicit shift.

Link: https://lore.kernel.org/all/20220628163137.413025-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Tested-by: Jeroen Hofstee <jhofstee@victronenergy.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-07-03 11:34:13 +02:00
Jianbo Liu
a8d52b024d net/mlx5e: TC, Support offloading police action
Add parsing support by implementing struct mlx5e_tc_act for police
action.

TC rule with police actions is broken down into several rules in
different tables. One rule with the original match in the original
flow table, which set fte_id, do metering, and jump to the post_meter
table. If there are more police actions, more rules are created for
each of them. Besides, a last rule is created in the end.

In post_meter table, there are two pre-defined rules, one is to drop
packet if its packet color is RED, the other is to jump back to
post_act table. As fte_id is updated before jumping, the rule for next
meter is matched to do another round of metering (if there are
multiple meters in the flow rule). Otherwise, last fte_id is matched
and do the original actions.

Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:29 -07:00
Jianbo Liu
03a92a938d net/mlx5e: Add flow_action to parse state
As a preparation for validating police action, adds flow_action to
parse state, which is to passed to parsing callbacks.

Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:29 -07:00
Jianbo Liu
06fe52a476 net/mlx5e: Add post meter table for flow metering
Flow meter object monitors the packets rate for the flows it is
attached to, and color packets with GREEN or RED. The post meter table
is used to check the color. Packet is dropped if it's RED, or
forwarded to post_act table if GREEN.

Packet color will be set to 8 LSB of the register C5, so they are
reserved for metering, which are previously used for matching fte id.

Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:29 -07:00
Jianbo Liu
17c5da0387 net/mlx5e: Add generic macros to use metadata register mapping
There are many definitions to get bits and mask for different types of
metadata register mapping, add generic macros to unify them.

Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:28 -07:00
Jianbo Liu
b8acfd4f21 net/mlx5e: Get or put meter by the index of tc police action
Add functions to create and destroy flow meter aso object.
This object only supports the range allocation. 64 objects are
allocated at a time, and there are two meters in each object.
Usually only one meter is allocated for a flow, so bitmap is used
to manage these 128 meters.

TC police action is mapped to hardware meter. As the index is unique
for each police action, add APIs to allocate or free hardware meter by
the index. If the meter is already created, increment its refcnt,
otherwise create new one. If police action has different parameters,
update hardware meter accordingly.

Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:28 -07:00
Jianbo Liu
6ddac26cf7 net/mlx5e: Add support to modify hardware flow meter parameters
The policing rate and burst from user are converted to flow meter
parameters in hardware. These parameters are set or modified by
ACCESS_ASO WQE, add function to support it.

Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:27 -07:00
Jianbo Liu
74e6b2a874 net/mlx5e: Prepare for flow meter offload if hardware supports it
If flow meter aso object is supported, set the allocated range, and
initialize aso wqe.

The allocated range is indicated by log_meter_aso_granularity in HW
capabilities, and currently is 6.

Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:27 -07:00
Jianbo Liu
c491ded043 net/mlx5: Implement interfaces to control ASO SQ and CQ
Add interfaces to use ASO object control channel. The channel consists
of a control SQ and CQ to which user can post ACCESS_ASO work requests
to modify ASO objects. The functions to get wqe from SQ, fill wqe,
post the request, and poll the completion of the work, are provided.

Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:27 -07:00
Jianbo Liu
cdd04f4d4d net/mlx5: Add support to create SQ and CQ for ASO
Add a separate API to create SQ and CQ for advanced steering
operations (ASO).

Since the mlx5_en API to create these resources is strongly coupled
with netdev channels and datapath elements, this API provides an
alternative for creating send queues that are used for ASO.

Currently the API allows creating channels with 2 wqbbs only - meaning
the support will be for a single ACCESS_ASO wqe with data at a time.

Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Ariel Levkovich <lariel@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:26 -07:00
Chris Mi
b6f2846afc net/mlx5: E-switch: Change eswitch mode only via devlink command
Enable or disable switchdev according to the eswitch mode set by
devlink command. So it is not changed by other functions anymore.

Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:26 -07:00
Chris Mi
f019679ea5 net/mlx5: E-switch, Remove dependency between sriov and eswitch mode
Currently, there are three eswitch modes, none, legacy and switchdev.
None is the default mode. Remove redundant none mode as eswitch mode
should always be either legacy mode or switchdev mode.

With this patch, there are two behavior changes:

1. Legacy becomes the default mode. When querying eswitch mode using
   devlink, a valid mode is always returned.
2. When disabling sriov, the eswitch mode will not change, only vfs
   are unloaded.

Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Maor Dickman <maord@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:26 -07:00
Chris Mi
fbd43b7259 net/mlx5: E-switch, Introduce flag to indicate if fdb table is created
Introduce flag to indicate if fdb table is created as a pre-step
to prepare for removing dependency between sriov and eswitch mode
in the downstream patches.

Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:25 -07:00
Chris Mi
ea5872dd6b net/mlx5: E-switch, Introduce flag to indicate if vport acl namespace is created
Eswitch vport acl namespace is needed when loading vfs. There is
no need to free and reallocate it when switching eswitch mode.
Introduce flag to indicate if it is created or not. When needed,
create it. Only free it when the driver is unloaded or in bare
metal mode.

Signed-off-by: Chris Mi <cmi@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:25 -07:00
Dan Carpenter
8e755f7a8c net/mlx5: delete dead code in mlx5_esw_unlock()
Smatch complains about this function:

    drivers/net/ethernet/mellanox/mlx5/core/eswitch.c:2000 mlx5_esw_unlock()
    warn: inconsistent returns '&esw->mode_lock'.

Before commit ec2fa47d7b ("net/mlx5: Lag, use lag lock") there
used to be a matching mlx5_esw_lock() function and the lock and
unlock functions were symmetric.  But now we take the lock
unconditionally and must unlock unconditionally as well.

As near as I can tell this is dead code and can just be deleted.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:25 -07:00
Leon Romanovsky
9de64ae816 net/mlx5: Delete ipsec_fs header file as not used
ipsec_fs.h is not used and can be safely deleted.

Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-07-02 11:58:24 -07:00
Arun Ramadoss
c8fac9d0aa net: dsa: microchip: add LAN937x in the ksz spi probe
This patch add the LAN937x part support in the existing ksz_spi_probe.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02 16:34:05 +01:00
Arun Ramadoss
a0cb1aa438 net: dsa: microchip: lan937x: add phylink_mac_config support
This patch add support for phylink_mac_config dsa hook. It configures
the mac for MII/RMII modes. The RGMII mode will be added in the future
patches.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02 16:34:05 +01:00
Arun Ramadoss
f597d3ad75 net: dsa: microchip: lan937x: add phylink_mac_link_up support
This patch add support for phylink_mac_link_up. It configures the mac
for the speed, flow control and duplex mode.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02 16:34:05 +01:00
Arun Ramadoss
c14e878d4a net: dsa: microchip: lan937x: add phylink_get_caps support
The internal phy of the LAN937x are capable of 100Mbps Full duplex. The
xMII port of switch is capable of 10Mbps Full & Half Duplex, 100Mbps
Full & Half Duplex and 1000Mbps Half duplex. xMII port also supports Tx
and Rx Flow control.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02 16:34:05 +01:00
Arun Ramadoss
ab8823688f net: dsa: microchip: lan937x: add MTU and fast_age support
This patch add the support for port_max_mtu, port_change_mtu and
port_fast_age dsa functionality.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02 16:34:05 +01:00
Arun Ramadoss
a50b35366c net: dsa: microchip: lan937x: register mdio-bus
This patch register mdio-bus for the lan937x series switch. mdio read
and write uses the vphy for accessing the phy register.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02 16:34:05 +01:00
Arun Ramadoss
ffaf1de2f6 net: dsa: microchip: lan937x: add phy read and write support
This patch add support for the writing and reading of the phy registers.
LAN937x uses the Vphy indirect addressing method for accessing the phys.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02 16:34:05 +01:00
Arun Ramadoss
99b16df0cd net: dsa: microchip: lan937x: add dsa_tag_protocol
This patch update the ksz_get_tag_protocol to return LAN937x specific
tag if the chip id matches one of LAN937x series switch

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02 16:34:05 +01:00
Arun Ramadoss
55ab6ffaf3 net: dsa: microchip: add DSA support for microchip LAN937x
Basic DSA driver support for lan937x and the device will be
configured through SPI interface.
It adds the lan937x_dev_ops in ksz_common.c file and tries to reuse the
functionality of ksz9477 series switch.

drivers/net/dsa/microchip/ path is already part of MAINTAINERS &
the new files come under this path. Hence no update needed to the
MAINTAINERS

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02 16:34:05 +01:00
Arun Ramadoss
457c182af5 net: dsa: microchip: generic access to ksz9477 static and reserved table
The ksz9477 and lan937x has few difference in the static and reserved
table register 0x041C. For the ksz9477 if the bit 0 is 1 - read
operation and 0 - write operation. But for lan937x bit 1:0 used for
selecting the read/write operation, 01 - write and 10 - read.
To use ksz9477 mdb add/del and enable_stp_addr for the lan937x, masks &
shifts are introduced for ksz9477 & lan937x in ksz_common.c. Then
updated the function with masks & shifts based on the switch instead of
hard coding it.

Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02 16:34:05 +01:00
Divya Koppera
a516b7f7ca net: phy: micrel: Adding LED feature for LAN8814 PHY
LED support for extended mode where
LED 1: Enhanced Mode 5 (10M/1000M/Activity)
LED 2: Enhanced Mode 4 (100M/1000M/Activity)

By default it supports KSZ9031 LED mode

Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02 16:30:44 +01:00
Eric Dumazet
504148fedb net: add skb_[inner_]tcp_all_headers helpers
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)"
to compute headers length for a TCP packet, but others
use more convoluted (but equivalent) ways.

Add skb_tcp_all_headers() and skb_inner_tcp_all_headers()
helpers to harmonize this a bit.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-02 16:22:25 +01:00
Jilin Yuan
04740c53ca qlogic/qed: fix repeated words in comments
Delete the redundant word 'a'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220630123924.7531-1-yuanjilin@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01 20:13:50 -07:00
Jilin Yuan
abf1efb6ae samsung/sxgbe: fix repeated words in comments
Delete the redundant word 'are'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220630124639.11420-1-yuanjilin@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01 20:13:39 -07:00
Jilin Yuan
93d663c7e5 stmicro/stmmac: fix repeated words in comments
Delete the redundant word 'all'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220630125222.14357-1-yuanjilin@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01 20:13:30 -07:00
Jilin Yuan
c31788832f ethernet/sun: fix repeated words in comments
Delete the redundant word 'the'.
Delete the redundant word 'is'.
Delete the redundant word 'start'.
Delete the redundant word 'checking'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220630130916.21074-1-yuanjilin@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01 20:13:19 -07:00
Oliver Neukum
1d7f94cdd8 usbnet: remove vestiges of debug macros
The driver has long since be converted to dynamic debugging.
The internal compile options for more debugging can simply be
deleted.

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220630110741.21314-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01 19:45:59 -07:00
Clément Léger
90c74f4d90 net: pcs: rzn1-miic: update speed only if interface is changed
As stated by Russel King, miic_config() can be called as a result of
ethtool setting the configuration while the link is already up. Since
the speed is also set in this function, it could potentially modify
the current speed that is set. This will only happen if there is
no PHY present and we aren't using fixed-link mode.

Handle that by storing the current interface mode in the miic_port
structure and update the speed only if the interface mode is going to
be changed.

Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20220629122003.189397-1-clement.leger@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01 19:16:00 -07:00
Shijith Thotton
b140569143 octeontx2-af: fix operand size in bitwise operation
Made size of operands same in bitwise operations.

The patch fixes the klocwork issue, operands in a bitwise operation have
different size at line 375 and 483.

Signed-off-by: Shijith Thotton <sthotton@marvell.com>
Link: https://lore.kernel.org/r/f4fba33fe4f89b420b4da11d51255e7cc6ea1dbf.1656586269.git.sthotton@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01 19:10:58 -07:00
Li kunyu
8dfeee9dc5 net: usb: Fix typo in code
Remove the repeated ';' from code.

Signed-off-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 13:50:25 +01:00
Bin Chen
c7b1267b1c nfp: support VF rate limit with NFDK
Support VF rate limiting with NFDK by adding ndo_set_vf_rate to the NFDK
ops structure.

NFDK is used to communicate via PCIE to NFP-3800 based NICs
while NFD3 is used for other NICs supported by the NFP driver.
The VF rate limit feature is already supported by the driver for NFD3.

Signed-off-by: Bin Chen <bin.chen@corigine.com>
Reviewed-by: Baowen Zheng <baowen.zheng@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 13:40:00 +01:00
Oliver Neukum
7fa2d1707d cdc-eem: always use BIT
Either you use BIT(x) or 1 << x in the same expression.
Mixing them is ridiculous. Go to BIT()

Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 13:39:03 +01:00
Li kunyu
368843301d cxgb4: Fix typo in string
Remove the repeated ',' from string

Signed-off-by: Li kunyu <kunyu@nfschina.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 13:37:54 +01:00
David S. Miller
71560d98e7 Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-06-30

This series contains updates to i40e driver only.

Lukasz adds reporting of packets dropped for being too large into the Rx
dropped statistics.

Norbert clears VF filter and MAC address to resolve issue with older VFs
being unable to change their MAC address.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 11:25:20 +01:00
David S. Miller
456bfd9dc8 Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/nex
t-queue

Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2022-06-30

This series contains updates to ice driver only.

Martyna adds support for VLAN related TC switchdev filters and reworks
dummy packet implementation of VLANs to enable dynamic header insertion to
allow for more rule types.

Lu Wei utilizes eth_broadcast_addr() helper over an open coded version.

Ziyang Xuan removes unneeded NULL checks.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 11:21:56 +01:00
Jilin Yuan
023e79db59 neterion/vxge: fix repeated words in comments
Delete the redundant word 'frame'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 11:14:25 +01:00
Jilin Yuan
f9f108f6d9 ethernet/neterion: fix repeated words in comments
Delete the redundant word 'the'.
Delete the redundant word 'a'.
Delete the redundant word 'frame'.
Delete the redundant word 'is'.
Delete the redundant word 'not'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 11:14:25 +01:00
Jilin Yuan
951c62709c ethernet/natsemi: fix repeated words in comments
Delete the redundant word 'in'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 11:14:24 +01:00
Jilin Yuan
627838275a mellanox/mlxsw: fix repeated words in comments
Delete the redundant word 'action'.
Delete the redundant word 'refer'.
Delete the redundant word 'for'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 11:14:24 +01:00
Jilin Yuan
1c3997b1cd ethernet/marvell: fix repeated words in comments
Delete the redundant word 'a'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 11:14:24 +01:00
Jilin Yuan
36704239c8 marvell/octeontx2/af: fix repeated words in comments
Delete the redundant word 'so'.

Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-01 11:14:24 +01:00
Veerendranath Jakkam
ecad3b0b99 wifi: cfg80211: Increase akm_suites array size in cfg80211_crypto_settings
Increase akm_suites array size in struct cfg80211_crypto_settings to 10
and advertise the capability to userspace. This allows userspace to send
more than two AKMs to driver in netlink commands such as
NL80211_CMD_CONNECT.

This capability is needed for implementing WPA3-Personal transition mode
correctly with any driver that handles roaming internally. Currently,
the possible AKMs for multi-AKM connect can include PSK, PSK-SHA-256,
SAE, FT-PSK and FT-SAE. Since the count is already 5, increasing
the akm_suites array size to 10 should be reasonable for future
usecases.

Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/1653312358-12321-1-git-send-email-quic_vjakkam@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-01 12:07:08 +02:00