Commit graph

112,392 commits

Author SHA1 Message Date
Joe Perches
af5175acc8 rtw89: rtw89_ser: add const to struct state_ent and event_ent
Change the struct and the uses to const to reduce data.

$ size drivers/net/wireless/realtek/rtw89/ser.o* (x86-64 defconfig w/ rtw89)
   text	   data	    bss	    dec	    hex	filename
   3741	      8	      0	   3749	    ea5	drivers/net/wireless/realtek/rtw89/ser.o.new
   3437	    312	      0	   3749	    ea5	drivers/net/wireless/realtek/rtw89/ser.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/2fd88e6119f62b968477ef9781abb1832d399fd6.camel@perches.com
2022-04-12 16:37:49 +03:00
Chia-Yuan Li
065cf8f977 rtw89: 8852c: add 8852c specific BT-coexistence initial function
Initialize registers to default values, such as PTA and GNT pin, and set
pin MUX according to number of antenna on hardware module.

Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-10-pkshih@realtek.com
2022-04-12 16:34:39 +03:00
Johnson Lin
d264edb1cc rtw89: Skip useless dig gain and igi related settings for 8852C
Separated DIG RX gain, IGI configurations from not supportted HW using
"support_igi" capability flag.

Signed-off-by: Johnson Lin <johnson.lin@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-9-pkshih@realtek.com
2022-04-12 16:34:39 +03:00
Chia-Yuan Li
ec356ffb29 rtw89: 8852c: disable firmware watchdog if CPU disabled
Disable watchdog timer to prevent it timeout suddenly.

Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-8-pkshih@realtek.com
2022-04-12 16:34:39 +03:00
Ping-Ke Shih
1817519701 rtw89: reset BA CAM
BA CAM is used to react receiving AMPDU packets, so reset them to be
expected initial state.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-7-pkshih@realtek.com
2022-04-12 16:34:39 +03:00
Ping-Ke Shih
9a1ab283c7 rtw89: change station scheduler setting for hardware TX mode
The bit B_AX_SS_NONEMPTY_SS2FINFO_EN should be clear, because we configure
C-MAC as hardware TX/RX mode.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-6-pkshih@realtek.com
2022-04-12 16:34:38 +03:00
Ping-Ke Shih
9f405b0162 rtw89: ser: configure top ERR IMR for firmware to recover
Turn on ERR IMR, and then firmware can capture interrupts reflecting
errors to recover hardware states.

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-5-pkshih@realtek.com
2022-04-12 16:34:38 +03:00
Chia-Yuan Li
d86369e937 rtw89: ser: configure C-MAC interrupt mask
Similarly, create functions to set specific C-MAC masks for firmware
recovery.

Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-4-pkshih@realtek.com
2022-04-12 16:34:38 +03:00
Chia-Yuan Li
eeadcd2a47 rtw89: ser: configure D-MAC interrupt mask
These interrupts are used by firmware to recover hardware. Create
functions to set specific D-MAC masks to replace plain register settings.

Signed-off-by: Chia-Yuan Li <leo.li@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-3-pkshih@realtek.com
2022-04-12 16:34:38 +03:00
Zong-Zhe Yang
5ddfffd6da rtw89: ser: fix unannotated fall-through
add `break` to fix warning of unannotated fall-through between switch
labels.

Fixes: 14f9f47900 ("rtw89: ser: control hci interrupts on/off by state")
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408001353.17188-2-pkshih@realtek.com
2022-04-12 16:34:38 +03:00
Yang Li
d7ceee8051 ath9k: Remove unnecessary print function dev_err()
The print function dev_err() is redundant because
platform_get_irq_byname() already prints an error.

Eliminate the follow coccicheck warning:
./drivers/net/wireless/ath/ath9k/ahb.c:103:2-9: line 103 is redundant
because platform_get_irq() already prints an error

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220408000113.129906-2-yang.lee@linux.alibaba.com
2022-04-12 16:13:43 +03:00
Yang Li
2578171ff8 wcn36xx: clean up some inconsistent indenting
Eliminate the follow smatch warning:
drivers/net/wireless/ath/wcn36xx/smd.c:3151
wcn36xx_smd_gtk_offload_get_info_rsp() warn: inconsistent indenting

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220408000113.129906-1-yang.lee@linux.alibaba.com
2022-04-12 16:13:07 +03:00
Colin Ian King
405342ebea ath11k: Fix spelling mistake "reseting" -> "resetting"
There is a spelling mistake in an ath11k_warn message. Fix it.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220407102820.613881-1-colin.i.king@gmail.com
2022-04-12 16:12:39 +03:00
Peter Seiderer
24584d4f0a ath9k: fix ath_get_rate_txpower() to respect the rate list end tag
Stop reading (and copying) from ieee80211_tx_rate to ath_tx_info.rates
after list end tag (count == 0, idx < 0), prevents copying of garbage
to card registers.

Note: no need to write to the remaining ath_tx_info.rates entries
as the complete ath_tx_info struct is already initialized to zero from
both call sites.

Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220402153014.31332-1-ps.report@gmx.net
2022-04-12 16:11:47 +03:00
Oliver Hartkopp
ec095263a9 net: remove noblock parameter from recvmsg() entities
The internal recvmsg() functions have two parameters 'flags' and 'noblock'
that were merged inside skb_recv_datagram(). As a follow up patch to commit
f4b41f062c ("net: remove noblock parameter from skb_recv_datagram()")
this patch removes the separate 'noblock' parameter for recvmsg().

Analogue to the referenced patch for skb_recv_datagram() the 'flags' and
'noblock' parameters are unnecessarily split up with e.g.

err = sk->sk_prot->recvmsg(sk, msg, size, flags & MSG_DONTWAIT,
                           flags & ~MSG_DONTWAIT, &addr_len);

or in

err = INDIRECT_CALL_2(sk->sk_prot->recvmsg, tcp_recvmsg, udp_recvmsg,
                      sk, msg, size, flags & MSG_DONTWAIT,
                      flags & ~MSG_DONTWAIT, &addr_len);

instead of simply using only flags all the time and check for MSG_DONTWAIT
where needed (to preserve for the formerly separated no(n)block condition).

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20220411124955.154876-1-socketcan@hartkopp.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 15:00:25 +02:00
Daniele Palmas
f015980900 net: usb: qmi_wwan: add Telit 0x1057 composition
Add the following Telit FN980 composition:

0x1057: tty, adb, rmnet, tty, tty, tty, tty, tty

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220411135943.4067264-1-dnlplm@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 13:07:35 +02:00
Martin Habets
d78eaf06b5 sfc: Remove global definition of efx_reset_type_names
The strings are only used in efx_common.c so the definitions
can be static in there.

Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 12:13:30 +02:00
Martin Habets
cc42e4e3f1 sfc: Remove duplicate definition of efx_xmit_done
It is defined both in efx.h and tx_common.h.
Remove the definition in efx.h.

Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 12:13:30 +02:00
Martin Habets
54fccfdd7c sfc: efx_default_channel_type APIs can be static
This means we can remove them from efx_channel.h and avoid
naming conflicts later.
efx_channel_dummy_op_void() cannot be static as it is
used in ef100_nic.c.

Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 12:13:30 +02:00
Russell King (Oracle)
7b972512ec net: dsa: mt7530: mark as non-legacy
The mt7530 driver does not make use of the speed, duplex, pause or
advertisement in its phylink_mac_config() implementation, so it can be
marked as a non-legacy driver.

Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 10:33:15 +02:00
Russell King (Oracle)
9d0df207c0 net: dsa: mt7530: move autoneg handling to PCS validation
Move the autoneg bit handling to the PCS validation, which allows us to
get rid of mt753x_phylink_validate() and rely on the default
phylink_generic_validate() implementation for the MAC side.

Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 10:33:15 +02:00
Russell King (Oracle)
cbd1f243bc net: dsa: mt7530: partially convert to phylink_pcs
Partially convert the mt7530 driver to use phylink's PCS support. This
is a partial implementation as we don't move anything into the
pcs_config method yet - this driver supports SGMII or 1000BASE-X
without in-band.

Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 10:33:15 +02:00
Russell King (Oracle)
6789d6d76e net: dsa: mt7530: switch to use phylink_get_linkmodes()
Switch mt7530 to use phylink_get_linkmodes() to generate the ethtool
linkmodes that can be supported. We are unable to use the generic
helper for this as pause modes are dependent on the interface as
the Autoneg bit depends on the interface mode.

Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 10:33:15 +02:00
Russell King (Oracle)
7c04c84891 net: dsa: mt7530: only indicate linkmodes that can be supported
Now that mt7530 is not using the basex helper, it becomes unnecessary to
indicate support for both 1000baseX and 2500baseX when one of the 803.3z
PHY interface modes is being selected. Ensure that the driver indicates
only those linkmodes that can actually be supported by the PHY interface
mode.

Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 10:33:15 +02:00
Russell King (Oracle)
fd301137e6 net: dsa: mt7530: drop use of phylink_helper_basex_speed()
Now that we have a better method to select SFP interface modes, we
no longer need to use phylink_helper_basex_speed() in a driver's
validation function.

Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 10:33:15 +02:00
Russell King (Oracle)
26f6d88102 net: dsa: mt7530: remove interface checks
As phylink checks the interface mode against the supported_interfaces
bitmap, we no longer need to validate the interface mode, nor handle
PHY_INTERFACE_MODE_NA in the validation function. Remove these to
simplify the implementation.

Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 10:33:15 +02:00
Russell King (Oracle)
59c2215f36 net: dsa: mt7530: populate supported_interfaces and mac_capabilities
Populate the supported interfaces and MAC capabilities for mt7530,
mt7531 and mt7621 DSA switches. Filling this in will enable phylink
to pre-check the PHY interface mode against the the supported
interfaces bitmap prior to calling the validate function, and will
eventually allow us to convert to using the generic validation.

Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 10:33:14 +02:00
Russell King (Oracle)
66f862563e net: dsa: mt7530: 1G can also support 1000BASE-X link mode
When using an external PHY connected using RGMII to mt7531 port 5, the
PHY can be used to used support 1000BASE-X connections. Moreover, if
1000BASE-T is supported, then we should allow 1000BASE-X as well, since
which are supported is a property of the PHY.

Therefore, it makes no sense to exclude this from the linkmodes when
1000BASE-T is supported.

Fixes: c288575f78 ("net: dsa: mt7530: Add the support of MT7531 switch")
Tested-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 10:33:14 +02:00
Lv Ruyi
ac6bef064f sfc: Fix spelling mistake "writting" -> "writing"
There are some spelling mistakes in the comment. Fix it.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn>
Link: https://lore.kernel.org/r/20220411032546.2517628-1-lv.ruyi@zte.com.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-04-12 09:34:05 +02:00
Minghao Chi
b66bfc131c net/cadence: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
Using pm_runtime_resume_and_get is more appropriate
for simplifing code

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220411013812.2517212-1-chi.minghao@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 20:53:56 -07:00
Haowen Bai
b8ff3395fb sfc: ef10: Fix assigning negative value to unsigned variable
fix warning reported by smatch:
251 drivers/net/ethernet/sfc/ef10.c:2259 efx_ef10_tx_tso_desc()
warn: assigning (-208) to unsigned variable 'ip_tot_len'

Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/r/1649640757-30041-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 20:53:09 -07:00
Horatiu Vultur
2ea1cbac26 net: lan966x: Update FDMA to change MTU.
When changing the MTU, it is required to change also the size of the
DBs. In case those frames will arrive to CPU.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 20:49:32 -07:00
Horatiu Vultur
c834963932 net: lan966x: Add FDMA functionality
Ethernet frames can be extracted or injected to or from the device's
DDR memory. There is one channel for injection and one channel for
extraction. Each of these channels contain a linked list of DCBs which
contains DB. The DCB contains only 1 DB for both the injection and
extraction. Each DB contains a frame. Every time when a frame is received
or transmitted an interrupt is generated.

It is not possible to use both the FDMA and the manual
injection/extraction of the frames. Therefore the FDMA has priority over
the manual because of better performance values.

FDMA:
iperf -c 192.168.1.1
[  5]   0.00-10.02  sec   420 MBytes   352 Mbits/sec    0 sender
[  5]   0.00-10.03  sec   420 MBytes   351 Mbits/sec      receiver

iperf -c 192.168.1.1 -R
[  5]   0.00-10.01  sec   528 MBytes   442 Mbits/sec    0 sender
[  5]   0.00-10.00  sec   524 MBytes   440 Mbits/sec      receiver

Manual:
iperf -c 192.168.1.1
[  5]   0.00-10.02  sec  93.8 MBytes  78.5 Mbits/sec    0 sender
[  5]   0.00-10.03  sec  93.8 MBytes  78.4 Mbits/sec      receiver

ipers -c 192.168.1.1 -R
[  5]   0.00-10.03  sec   121 MBytes   101 Mbits/sec    0 sender
[  5]   0.00-10.01  sec   118 MBytes  99.0 Mbits/sec      receiver

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 20:49:32 -07:00
Horatiu Vultur
8f2c7d9ad7 net: lan966x: Expose functions that are needed by FDMA
Expose the following functions 'lan966x_hw_offload',
'lan966x_ifh_get_src_port' and 'lan966x_ifh_get_timestamp' in
lan966x_main.h so they can be accessed by FDMA.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 20:49:32 -07:00
Horatiu Vultur
fdb2981c00 net: lan966x: Add registers that are used for FDMA.
Add the registers that are used to configure the FDMA.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 20:49:31 -07:00
Jonathan Neuschäfer
d6967d0414 net: calxedaxgmac: Fix typo (doubled "the")
Fix a doubled word in the comment above xgmac_poll.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Link: https://lore.kernel.org/r/20220409182147.2509788-1-j.neuschaefer@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 20:49:21 -07:00
YueHaibing
bfa323c659 net: ethernet: ti: am65-cpsw: Fix build error without PHYLINK
If PHYLINK is n, build fails:

drivers/net/ethernet/ti/am65-cpsw-ethtool.o: In function `am65_cpsw_set_link_ksettings':
am65-cpsw-ethtool.c:(.text+0x118): undefined reference to `phylink_ethtool_ksettings_set'
drivers/net/ethernet/ti/am65-cpsw-ethtool.o: In function `am65_cpsw_get_link_ksettings':
am65-cpsw-ethtool.c:(.text+0x138): undefined reference to `phylink_ethtool_ksettings_get'
drivers/net/ethernet/ti/am65-cpsw-ethtool.o: In function `am65_cpsw_set_eee':
am65-cpsw-ethtool.c:(.text+0x158): undefined reference to `phylink_ethtool_set_eee'

Select PHYLINK for TI_K3_AM65_CPSW_NUSS to fix this.

Fixes: e8609e6947 ("net: ethernet: ti: am65-cpsw: Convert to PHYLINK")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/20220409105931.9080-1-yuehaibing@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 20:49:10 -07:00
Horatiu Vultur
269219321e net: lan966x: Stop processing the MAC entry is port is wrong.
Currently when getting a new MAC is learn, the HW generates an
interrupt. So then the SW will check the new entry and checks if it
arrived on a correct port. If it didn't just generate a warning.
But this could still crash the system. Therefore stop processing that
entry when an issue is seen.

Fixes: 5ccd66e01c ("net: lan966x: add support for interrupts from analyzer")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 20:47:15 -07:00
Horatiu Vultur
d7a947d289 net: lan966x: Fix when a port's upper is changed.
On lan966x it is not allowed to have foreign interfaces under a bridge
which already contains lan966x ports. So when a port leaves the bridge
it would call switchdev_bridge_port_unoffload which eventually will
notify the other ports that bridge left the vlan group but that is not
true because the bridge is still part of the vlan group.

Therefore when a port leaves the bridge, stop generating replays because
already the HW cleared after itself and the other ports don't need to do
anything else.

Fixes: cf2f60897e ("net: lan966x: Add support to offload the forwarding.")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 20:47:15 -07:00
Horatiu Vultur
6476f90aef net: lan966x: Fix IGMP snooping when frames have vlan tag
In case an IGMP frame has a vlan tag, then the function
lan966x_hw_offload couldn't figure out that is a IGMP frame. Therefore
the SW thinks that the frame was already forward by the HW which is not
true.
Extend lan966x_hw_offload to pop the vlan tag if are any and then check
for IGMP frames.

Fixes: 47aeea0d57 ("net: lan966x: Implement the callback SWITCHDEV_ATTR_ID_BRIDGE_MC_DISABLED ")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 20:47:15 -07:00
Horatiu Vultur
eb9c0d671e net: lan966x: Update lan966x_ptp_get_nominal_value
The clk_per_cfg register represents the value added to the system clock
for each clock cycle. The issue is that the default value is wrong,
meaning that in case the DUT was a grandmaster then everone in the
network was too slow. In case there was a grandmaster, then there is no
issue because the DUT will configure clk_per_cfg register based on the
master frequency.

Fixes: d096459494 ("net: lan966x: Add support for ptp clocks")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 20:47:15 -07:00
Jakub Kicinski
e69a837f58 Merge branch 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Leon Romanovsky says:

====================
Mellanox shared branch that includes:

 * Removal of FPGA TLS code https://lore.kernel.org/all/cover.1649073691.git.leonro@nvidia.com

  Mellanox INNOVA TLS cards are EOL in May, 2018 [1]. As such, the code
  is unmaintained, untested and not in-use by any upstream/distro oriented
  customers. In order to reduce code complexity, drop the kernel code,
  clean build config options and delete useless kTLS vs. TLS separation.

  [1] https://network.nvidia.com/related-docs/eol/LCR-000286.pdf

 * Removal of FPGA IPsec code https://lore.kernel.org/all/cover.1649232994.git.leonro@nvidia.com

  Together with FPGA TLS, the IPsec went to EOL state in the November of
  2019 [1]. Exactly like FPGA TLS, no active customers exist for this
  upstream code and all the complexity around that area can be deleted.

  [2] https://network.nvidia.com/related-docs/eol/LCR-000535.pdf

 * Fix to undefined behavior from Borislav https://lore.kernel.org/all/20220405151517.29753-11-bp@alien8.de

* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux: (23 commits)
  net/mlx5: Remove not-implemented IPsec capabilities
  net/mlx5: Remove ipsec_ops function table
  net/mlx5: Reduce kconfig complexity while building crypto support
  net/mlx5: Move IPsec file to relevant directory
  net/mlx5: Remove not-needed IPsec config
  net/mlx5: Align flow steering allocation namespace to common style
  net/mlx5: Unify device IPsec capabilities check
  net/mlx5: Remove useless IPsec device checks
  net/mlx5: Remove ipsec vs. ipsec offload file separation
  RDMA/core: Delete IPsec flow action logic from the core
  RDMA/mlx5: Drop crypto flow steering API
  RDMA/mlx5: Delete never supported IPsec flow action
  net/mlx5: Remove FPGA ipsec specific statistics
  net/mlx5: Remove XFRM no_trailer flag
  net/mlx5: Remove not-used IDA field from IPsec struct
  net/mlx5: Delete metadata handling logic
  net/mlx5_fpga: Drop INNOVA IPsec support
  IB/mlx5: Fix undefined behavior due to shift overflowing the constant
  net/mlx5: Cleanup kTLS function names and their exposure
  net/mlx5: Remove tls vs. ktls separation as it is the same
  ...
====================

Link: https://lore.kernel.org/r/20220409055303.1223644-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 20:34:02 -07:00
Minghao Chi
e2d0acd40c net: stmmac: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
Using pm_runtime_resume_and_get is more appropriate
for simplifing code

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220408081250.2494588-1-chi.minghao@zte.com.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 20:31:59 -07:00
Jakub Kicinski
65745da171 Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-04-08

Alexander fixes a use after free issue with aRFS for ice driver.

Mateusz reverts a commit that introduced issues related to device
resets for iavf driver.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  Revert "iavf: Fix deadlock occurrence during resetting VF interface"
  ice: arfs: fix use-after-free when freeing @rx_cpu_rmap
====================

Link: https://lore.kernel.org/r/20220408163411.2415552-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 18:34:44 -07:00
Haiyang Zhang
1cb9d3b618 hv_netvsc: Add support for XDP_REDIRECT
Handle XDP_REDIRECT action in netvsc driver.
Also, transparently pass ndo_xdp_xmit to VF when available.

Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Link: https://lore.kernel.org/r/1649362894-20077-1-git-send-email-haiyangz@microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 18:25:47 -07:00
Tomas Melin
5ad7f18cd8 net: macb: Restart tx only if queue pointer is lagging
commit 4298388574 ("net: macb: restart tx after tx used bit read")
added support for restarting transmission. Restarting tx does not work
in case controller asserts TXUBR interrupt and TQBP is already at the end
of the tx queue. In that situation, restarting tx will immediately cause
assertion of another TXUBR interrupt. The driver will end up in an infinite
interrupt loop which it cannot break out of.

For cases where TQBP is at the end of the tx queue, instead
only clear TX_USED interrupt. As more data gets pushed to the queue,
transmission will resume.

This issue was observed on a Xilinx Zynq-7000 based board.
During stress test of the network interface,
driver would get stuck on interrupt loop within seconds or minutes
causing CPU to stall.

Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220407161659.14532-1-tomas.melin@vaisala.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 18:18:07 -07:00
Guillaume Nault
9f6982e9a3 net: marvell: prestera: Use dscp_t in struct prestera_kern_fib_cache
Use the new dscp_t type to replace the kern_tos field of struct
prestera_kern_fib_cache. This ensures ECN bits are ignored and makes it
compatible with the dscp fields of struct fib_entry_notifier_info and
struct fib_rt_info.

This also allows sparse to flag potential incorrect uses of DSCP and
ECN bits.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Yevhen Orlov <yevhen.orlov@plvision.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 17:38:02 -07:00
Guillaume Nault
046eabbf19 mlxsw: Use dscp_t in struct mlxsw_sp_fib4_entry
Use the new dscp_t type to replace the tos field of struct
mlxsw_sp_fib4_entry. This ensures ECN bits are ignored and makes it
compatible with the dscp fields of fib_entry_notifier_info and
fib_rt_info.

This also allows sparse to flag potential incorrect uses of DSCP and
ECN bits.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 17:38:01 -07:00
Guillaume Nault
20bbf32efe netdevsim: Use dscp_t in struct nsim_fib4_rt
Use the new dscp_t type to replace the tos field of struct
nsim_fib4_rt. This ensures ECN bits are ignored and makes it compatible
with the dscp fields of struct fib_entry_notifier_info and struct
fib_rt_info.

This also allows sparse to flag potential incorrect uses of DSCP and
ECN bits.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 17:37:58 -07:00
Guillaume Nault
568a3f33b4 ipv4: Use dscp_t in struct fib_entry_notifier_info
Use the new dscp_t type to replace the tos field of struct
fib_entry_notifier_info. This ensures ECN bits are ignored and makes it
compatible with the dscp field of struct fib_rt_info.

This also allows sparse to flag potential incorrect uses of DSCP and
ECN bits.

Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-11 17:37:50 -07:00