Commit graph

112,392 commits

Author SHA1 Message Date
Linus Torvalds
93287e28bc Updates for the interrupt subsystem:
Core code:
 
    - Provide generic_handle_irq_safe() which can be invoked from any
      context (hard interrupt or threaded). This allows to remove ugly
      workarounds in drivers all over the place.
 
    - Use generic_handle_irq_safe() in the affected drivers.
 
    - The usual cleanups and improvements.
 
  Interrupt chip drivers:
 
    - Support for new interrupt chips or not yet supported variants:
      STM32MP14, Meson GPIO, Apple M1 PMU, Apple M1 AICv2, Qualcomm MPM
 
    - Convert the Xilinx driver to generic interrupt domains
 
    - Cleanup the irq_chip::name handling
 
    - The usual cleanups and improvements all over the place
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmI4VmETHHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoYkQEAC8Lo4tGLVKqcDewYLrLLtUk2GrbXW0
 j/L0Su6xcdyCV6h2i8oB7SHBDP6nJ9dHOqR+Rk9/XZrDV5e32cnsY4TuipZ271B7
 H+6VNykO60cbhRox+hHqe4bHO3qOdPUJvZ5DBt3+TC5T4P3/Il9DUIxWrDliqAzI
 KewgNwGFXLmuvoTGpGoEKRbAHEXwYy6WMwDSmDhMl0CQOE6i5JM5Fkt25hQppq+T
 4LZ3Peb4LoBtQJnT+VTgb3ZTlSJSVb82qR0mkldLmIGtdOD9sG8DhCYNzoB09hKz
 Wiz+pQWrVcfX4H3lHwhInlaWU2Li/3LQ9hBqR1Kdm9NvT1e2eiVkPJGZc6sDsrg9
 tAUutG6OXJpw0x9zvO98rfUiUg1Z9Ofnb5eR9NZi8/IMLqlxQ/HTpP1RBaDPmZ+V
 srU16y7tX7wyqv/Le0yZlRY9y4TNHQPF+ffcu6dw4PFl4niXTNBzuVvkyCGNZl9C
 5q6yu+0l/0scxoirzVEmWJOMQTY3TufObpTEY4j5e9Ji6xfM1JvL8rZkVV2DKZAw
 NgJrkM+lFFdMMOfDCjqm5/b38LteU3etChwSnrgsSe/W26vIZP5eljKKAcxGDTzX
 tdE5sq+EpjjHjFPOwjJNE6i37XucRtoGWGVL3xjbcsbLb2AVo4V7EbxVT3GBCsxL
 oEGTL2hDt2UksQ==
 =4eWv
 -----END PGP SIGNATURE-----

Merge tag 'irq-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull interrupt updates from Thomas Gleixner:
 "Core code:

   - Provide generic_handle_irq_safe() which can be invoked from any
     context (hard interrupt or threaded). This allows to remove ugly
     workarounds in drivers all over the place.

   - Use generic_handle_irq_safe() in the affected drivers.

   - The usual cleanups and improvements.

  Interrupt chip drivers:

   - Support for new interrupt chips or not yet supported variants:
     STM32MP14, Meson GPIO, Apple M1 PMU, Apple M1 AICv2, Qualcomm MPM

   - Convert the Xilinx driver to generic interrupt domains

   - Cleanup the irq_chip::name handling

   - The usual cleanups and improvements all over the place"

* tag 'irq-core-2022-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (52 commits)
  irqchip: Add Qualcomm MPM controller driver
  dt-bindings: interrupt-controller: Add Qualcomm MPM support
  irqchip/apple-aic: Add support for AICv2
  irqchip/apple-aic: Support multiple dies
  irqchip/apple-aic: Dynamically compute register offsets
  irqchip/apple-aic: Switch to irq_domain_create_tree and sparse hwirqs
  irqchip/apple-aic: Add Fast IPI support
  dt-bindings: interrupt-controller: apple,aic2: New binding for AICv2
  PCI: apple: Change MSI handling to handle 4-cell AIC fwspec form
  irqchip/apple-aic: Fix cpumask allocation for FIQs
  irqchip/meson-gpio: Add support for meson s4 SoCs
  irqchip/meson-gpio: add select trigger type callback
  irqchip/meson-gpio: support more than 8 channels gpio irq
  dt-bindings: interrupt-controller: New binding for Meson-S4 SoCs
  irqchip/xilinx: Switch to GENERIC_IRQ_MULTI_HANDLER
  staging: greybus: gpio: Use generic_handle_irq_safe().
  net: usb: lan78xx: Use generic_handle_irq_safe().
  mfd: ezx-pcap: Use generic_handle_irq_safe().
  misc: hi6421-spmi-pmic: Use generic_handle_irq_safe().
  irqchip/sifive-plic: Disable S-mode IRQs if running in M-mode
  ...
2022-03-21 13:03:00 -07:00
Jakub Kicinski
14e426bf1a devlink: hold the instance lock during eswitch_mode callbacks
Make the devlink core hold the instance lock during eswitch_mode
callbacks. Cheat in case of mlx5 (see the cover letter).

Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 14:11:38 +00:00
Jakub Kicinski
aff3a92509 netdevsim: replace vfs_lock with devlink instance lock
Similarly to the previous commit, use the devlink instance
lock and let it replace the vfs_lock.

nsim_esw_legacy_enable() was locked by both port lock and
vfs lock so one set of lock/unlocks goes away.

netdevsim's .eswitch_mode_set callback is now ready for
the callback to take the instance lock.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 14:11:38 +00:00
Jakub Kicinski
76eea6c2e6 netdevsim: replace port_list_lock with devlink instance lock
Take advantage of the devlink instance lock for protecting
the port list. This will simplify locking even more once
all devlink callbacks hold the instance lock.

We need to add locking in nsim_dev_port_add_all() which used
to assume higher layer protection when accessing the list.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 14:11:38 +00:00
Jakub Kicinski
7a1b0b1a55 bnxt: use the devlink instance lock to protect sriov
In prep for .eswitch_mode_set being called with the devlink instance
lock held use that lock explicitly instead of creating a local mutex
just for the sriov reconfig.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 14:11:38 +00:00
Tong Zhang
d2d803d1c7 i825xx: fix typo "Frame to short" -> "Frame too short"
"Frame to short" -> "Frame too short"

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 13:26:38 +00:00
Tong Zhang
e94b99a40b ar5523: fix typo "to short" -> "too short"
"RX USB to short" -> "RX USB too short"

Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 13:26:38 +00:00
Casper Andersson
3bacfccdcb net: sparx5: Add mdb handlers
Adds mdb handlers. Uses the PGID arbiter to
find a free entry in the PGID table for the
multicast group port mask.

Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 13:24:28 +00:00
Casper Andersson
af9b45d08e net: sparx5: Add arbiter for managing PGID table
The PGID (Port Group ID) table holds port masks
for different purposes. The first 72 are reserved
for port destination masks, flood masks, and CPU
forwarding. The rest are shared between multicast,
link aggregation, and virtualization profiles. The
GLAG area is reserved to not be used by anything
else, since it is a subset of the MCAST area.

The arbiter keeps track of which entries are in
use. You can ask for a free ID or give back one
you are done using.

Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 13:24:28 +00:00
Yinjun Zhang
d9d950490a nfp: nfdk: implement xdp tx path for NFDK
Due to the different definition of txbuf in NFDK comparing to NFD3,
there're no pre-allocated txbufs for xdp use in NFDK's implementation,
we just use the existed rxbuf and recycle it when xdp tx is completed.

For each packet to transmit in xdp path, we cannot use more than
`NFDK_TX_DESC_PER_SIMPLE_PKT` txbufs, one is to stash virtual address,
and another is for dma address, so currently the amount of transmitted
bytes is not accumulated. Also we borrow the last bit of virtual addr
to indicate a new transmitted packet due to address's alignment
attribution.

Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 13:21:17 +00:00
Jakub Kicinski
c10d12e3dc nfp: add support for NFDK data path
Add new data path.  The TX is completely different, each packet
has multiple descriptor entries (between 2 and 32).  TX ring is
divided into blocks 32 descriptor, and descritors of one packet
can't cross block bounds. The RX side is the same for now.

ABI version 5 or later is required.  There is no support for
VLAN insertion on TX. XDP_TX action and AF_XDP zero-copy is not
implemented in NFDK path.

Changes to Jakub's work:
* Move statistics of hw_csum_tx after jumbo packet's segmentation.
* Set L3_CSUM flag to enable recaculating of L3 header checksum
in ipv4 case.
* Mark the case of TSO a packet with metadata prepended as
unsupported.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Xingfeng Hu <xingfeng.hu@corigine.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Dianchao Wang <dianchao.wang@corigine.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 13:21:17 +00:00
Jakub Kicinski
d9e3c29918 nfp: choose data path based on version
Prepare for choosing data path based on the firmware version field.
Exploit one bit from the reserved byte in the firmware version field
as the data path type.  We need the firmware version right after
vNIC is allocated, so it has to be read inside nfp_net_alloc(),
callers don't have to set it afterwards.

Following patches will bring the implementation of the second data
path.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 13:21:17 +00:00
Jakub Kicinski
b94b6a1342 nfp: add per-data path feature mask
Make sure that features supported only by some of the data paths
are not enabled for all.  Add a mask of supported features into
the data path op structure.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 13:21:16 +00:00
Jakub Kicinski
0dcf7f500b nfp: use TX ring pointer write back
Newer versions of the PCIe microcode support writing back the
position of the TX pointer back into host memory.  This speeds
up TX completions, because we avoid a read from device memory
(replacing PCIe read with DMA coherent read).

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 13:21:16 +00:00
Jakub Kicinski
07cd69c96b nfp: move tx_ring->qcidx into cold data
QCidx is not used on fast path, move it to the lower cacheline.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 13:21:16 +00:00
Jakub Kicinski
d6488c49c2 nfp: prepare for multi-part descriptors
New datapaths may use multiple descriptor units to describe
a single packet.  Prepare for that by adding a descriptors
per simple frame constant into ring size calculations.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 13:21:16 +00:00
Jakub Kicinski
6fd86efa63 nfp: use callbacks for slow path ring related functions
To reduce the coupling of slow path ring implementations and their
callers, use callbacks instead.

Changes to Jakub's work:
* Also use callbacks for xmit functions

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 13:21:16 +00:00
Jakub Kicinski
62d033309d nfp: move the fast path code to separate files
In preparation for support for a new datapath format move all
ring and fast path logic into separate files. It is basically
a verbatim move with some wrapping functions, no new structures
and functions added.

The current data path is called NFD3 from the initial version
of the driver ABI it used. The non-fast path, but ring related
functions are moved to nfp_net_dp.c file.

Changes to Jakub's work:
* Rebase on xsk related code.
* Split the patch, move the callback changes to next commit.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 13:21:16 +00:00
Jakub Kicinski
fc9769f62e nfp: calculate ring masks without conditionals
Ring enable masks are 64bit long.  Replace mask calculation from:
  block_cnt == 64 ? 0xffffffffffffffffULL : (1 << block_cnt) - 1
with:
  (U64_MAX >> (64 - block_cnt))
to simplify the code.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Fei Qin <fei.qin@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 13:21:16 +00:00
Casper Andersson
e6980b572f net: sparx5: Use vid 1 when bridge default vid 0 to avoid collision
Standalone ports use vid 0. Let the bridge use vid 1 when
"vlan_default_pvid 0" is set to avoid collisions. Since no
VLAN is created when default pvid is 0 this is set
at "PORT_ATTR_SET" and handled in the Switchdev fdb handler.

Signed-off-by: Casper Andersson <casper.casan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 11:03:40 +00:00
Wan Jiabing
b8f7544a6c qed: remove unnecessary memset in qed_init_fw_funcs
allocated_mem is allocated by kcalloc(). The memory is set to zero.
It is unnecessary to call memset again.

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-21 10:59:56 +00:00
Hari Chandrakanthan
72a9bff386 ath11k: change fw build id format in driver init log
Currently fw build id is printed during init as follows.

fw_version 0x250684a5 fw_build_timestamp 2021-07-13 10:57
fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

The string "QC_IMAGE_VERSION_STRING=" is removed from the log
to improve readability.

With this patch the fw build id is printed during init as follows.
fw_version 0x250684a5 fw_build_timestamp 2021-07-13 10:57
fw_build_id WLAN.HK.2.5.0.1-01100-QCAHKSWPL_SILICONZ-1

Signed-off-by: Hari Chandrakanthan <quic_haric@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1646825065-7736-1-git-send-email-quic_haric@quicinc.com
2022-03-21 12:55:44 +02:00
Karthikeyan Periyasamy
997dc60f08 ath11k: Refactor the peer delete
Introduce new helper function for peer delete to reuse this logic
in all peer cleanup procedures. Found this in code review.
Also this change is applicable for all the platform.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01067-QCAHKSWPL_SILICONZ-1

Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1646024079-26391-1-git-send-email-quic_periyasa@quicinc.com
2022-03-21 12:54:35 +02:00
Meng Tang
c4e9705c50 ath10k: Use of_device_get_match_data() helper
Only the device data is needed, not the entire struct of_device_id.
Use of_device_get_match_data() instead of of_match_device().

Signed-off-by: Meng Tang <tangmeng@uniontech.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220318025331.23030-1-tangmeng@uniontech.com
2022-03-21 12:48:24 +02:00
Youghandhar Chintala
2c3fc50591 ath10k: Trigger sta disconnect on hardware restart
Currently after the hardware restart triggered from the driver,
the station interface connection remains intact, since a disconnect
trigger is not sent to userspace. This can lead to a problem in
targets where the wifi mac sequence is added by the firmware.

After the target restart, its wifi mac sequence number gets
reset to zero. Hence AP to which our device is connected will receive
frames with a  wifi mac sequence number jump to the past, thereby
resulting in the AP dropping all these frames, until the frame
arrives with a wifi mac sequence number which AP was expecting.

To avoid such frame drops, its better to trigger a station disconnect
upon target hardware restart which can be done with API
ieee80211_reconfig_disconnect exposed to mac80211.

The other targets are not affected by this change, since the hardware
params flag is not set.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.3.1-01040-QCAHLSWMTPLZ-1
Tested-on: QCA6174 hw3.2 PCI WLAN.RM.4.4.1-00110-QCARMSWP-1
Tested-on: QCA6174 hw3.2 SDIO WLAN.RMH.4.4.1-00048

Signed-off-by: Youghandhar Chintala <youghand@codeaurora.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220315082944.12406-3-youghand@codeaurora.org
2022-03-21 12:46:16 +02:00
David S. Miller
092d992b76 mlx5-updates-2022-03-18
1) XDP multi buffer support
 
 This series enables XDP on non-linear legacy RQ in multi buffer mode.
 
 When XDP is enabled, fragmentation scheme on non-linear legacy RQ is
 adjusted to comply to limitations of XDP multi buffer (fragments of the
 same size). DMA addresses of fragments are stored in struct page for the
 completion handler to be able to unmap them. XDP_TX is supported.
 
 XDP_REDIRECT is not yet supported, the XDP core blocks it for multi
 buffer packets at the moment.
 
 2) Trivial cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmI08MUACgkQSD+KveBX
 +j6fZQf/buaCo/KQ5LdB8n4VbxkvcI3IV0gHqdFW183q37Cf1P9EdiJoq4Bs/qN/
 1m3X10ZyFKiyrpVH0zNEJ9CZLCyhk9aJ+ttwOk/9QR+za6xcKFJ1NOHlTWqoK8pG
 89KcSLbd5Bfqp+lV9s3/sQq5BXrJduy8vZL7gT93hGFcX9lk1mcX+ldGfvcT/tj9
 IhebVY/MpwR3O54w4f/wuG0cGHFt0wqbxgF3BfWF1pai7gjtWTFvFA8usI2DxkbY
 ze6keixVutjuBvfA8WB0JPypwtGf1Q3UdvuHuidPZ7LU9z1x4L9l0g8AuDCi4Z7A
 +vzag86KbHDw4L939IYQKkwRUDtLoQ==
 =0oS3
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-updates-2022-03-18' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2022-03-18

1) XDP multi buffer support

This series enables XDP on non-linear legacy RQ in multi buffer mode.

When XDP is enabled, fragmentation scheme on non-linear legacy RQ is
adjusted to comply to limitations of XDP multi buffer (fragments of the
same size). DMA addresses of fragments are stored in struct page for the
completion handler to be able to unmap them. XDP_TX is supported.

XDP_REDIRECT is not yet supported, the XDP core blocks it for multi
buffer packets at the moment.

2) Trivial cleanups
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-19 14:50:19 +00:00
Jakub Kicinski
49270afa03 Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
40GbE Intel Wired LAN Driver Updates 2022-03-17

This series contains updates to i40e and igb drivers.

Tom Rix moves a conversion to little endian to occur only when the
value is used for i40e. He also zeros out a structure to resolve
possible use of garbage value for igb as reported by clang.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  igb: zero hwtstamp by default
  i40e: little endian only valid checksums
====================

Link: https://lore.kernel.org/r/20220317160236.3534321-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18 21:38:21 -07:00
Colin Ian King
79fdce0513 qlcnic: remove redundant assignment to variable index
Variable index is being assigned a value that is never read, it is being
re-assigned later in a following for-loop. The assignment is redundant
and can be removed.

Cleans up clang scan build warning:
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c:1358:17: warning:
Although the value stored to 'index' is used in the enclosing expression,
the value is never actually read from 'index' [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220318012035.89482-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18 14:18:41 -07:00
Colin Ian King
0978e5919c atl1c: remove redundant assignment to variable size
Variable sie is being assigned a value that is never read. The
The assignment is redundant and can be removed.

Cleans up clang scan build warning:
drivers/net/ethernet/atheros/atl1c/atl1c_main.c:1054:22: warning:
Although the value stored to 'size' is used in the enclosing
expression, the value is never actually read from 'size'
[deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220318005021.82073-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-18 14:16:47 -07:00
Saeed Mahameed
5dc2b581cd net/mlx5e: HTB, remove unused function declaration
There is no function mlx5e_get_sq(), remove the declaration.

Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
2022-03-18 13:51:16 -07:00
Tariq Toukan
60796198b4 net/mlx5e: Statify function mlx5_cmd_trigger_completions
Starting from commit
4cab346bcf ("net/mlx5: No command allowed when command interface is not ready"),
no calls to mlx5_cmd_trigger_completions() are external to cmd.c anymore.
Make it a static function.

Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-18 13:51:16 -07:00
Maxim Mikityanskiy
08c34e9542 net/mlx5e: Remove MLX5E_XDP_TX_DS_COUNT
After introducing multi-buffer XDP_TX, the MLX5E_XDP_TX_DS_COUNT define
became misleading. It's no longer the DS count of an XDP_TX WQE, this
WQE can be longer because of fragments.

As this define is only used at one place in mlx5e_open_xdpsq(), it's
also not very useful anymore. This commit removes the define and puts
the calculation of ds_count for prefilled single-fragment WQEs inline.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-18 13:51:16 -07:00
Maxim Mikityanskiy
1b8a10bbfe net/mlx5e: Permit XDP with non-linear legacy RQ
Now that legacy RQ implements XDP in the non-linear mode, stop blocking
this configuration. Allow non-linear mode only for programs aware of
multi buffer.

XDP performance with linear mode RQ hasn't changed.

Baseline (MTU 1500, TX MPWQE, legacy RQ, single core):
 60-byte packets, XDP_DROP: 11.25 Mpps
 60-byte packets, XDP_TX: 9.0 Mpps
 60-byte packets, XDP_PASS: 668 kpps

Multi buffer (MTU 9000, TX MPWQE, legacy RQ, single core):
 60-byte packets, XDP_DROP: 10.1 Mpps
 60-byte packets, XDP_TX: 6.6 Mpps
 60-byte packets, XDP_PASS: 658 kpps
 8900-byte packets, XDP_DROP: 769 kpps (100% of sent packets)
 8900-byte packets, XDP_TX: 674 kpps (100% of sent packets)
 8900-byte packets, XDP_PASS: 637 kpps

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-18 13:51:15 -07:00
Maxim Mikityanskiy
a48ad58cec net/mlx5e: Support multi buffer XDP_TX
This commit enables passing multi buffer XDP frames to the TX handlers
on XDP_TX. Fragments are DMA synchronized to the device and queued to
the xdpi_fifo for a subsequent unmapping.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-18 13:51:15 -07:00
Maxim Mikityanskiy
fbeed25bcc net/mlx5e: Unindent the else-block in mlx5e_xmit_xdp_buff
The next commit will add more indentation levels to mlx5e_xmit_xdp_buff.
To keep indentation minimal, unindent the else-block of the if-statement
by doing an early return.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-18 13:51:14 -07:00
Maxim Mikityanskiy
39a1665d16 net/mlx5e: Implement sending multi buffer XDP frames
xmit_xdp_frame is extended to support sending fragmented XDP frames. The
next commit will start using this functionality.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-18 13:51:14 -07:00
Maxim Mikityanskiy
9ded70fa1d net/mlx5e: Don't prefill WQEs in XDP SQ in the multi buffer mode
When MPWQE is disabled, mlx5e_open_xdpsq() prefills the common fields of
WQEs in the XDP SQ to save time when sending packets.
mlx5e_xmit_xdp_frame() runs on the prefilled fields, however, sending
multi buffer XDP frames would require changing some of these fields on a
per-packet basis. Besides that, mlx5e_xmit_xdp_frame() will be used as a
fallback to send multi buffer XDP frames when MPWQE is enabled (MPWQE
can only handle linear packets).

In order to prepare for XDP multi buffer support, this commit introduces
a mode for mlx5e_xmit_xdp_frame() that fills all the fields itself.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-18 13:51:14 -07:00
Maxim Mikityanskiy
c090451633 net/mlx5e: Remove assignment of inline_hdr.sz on XDP TX
When MPWQE is disabled, mlx5e_open_xdpsq prefills the common fields of
WQEs in the XDP SQ to save time when sending packets. One of such fields
is eseg->inline_hdr.sz, which can be either 0 or MLX5E_XDP_MIN_INLINE,
depending on the inline mode of the SQ.

The inline mode can't change during the lifetime of the SQ, so setting
this field again in mlx5e_xmit_xdp_frame is redundant. Moreover, the
xmit function only sets it to MLX5E_XDP_MIN_INLINE, but not to 0 in the
other case.

This commit removes the redundant assignment in mlx5e_xmit_xdp_frame.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-18 13:51:13 -07:00
Maxim Mikityanskiy
49529a1726 net/mlx5e: Move mlx5e_xdpi_fifo_push out of xmit_xdp_frame
The implementations of xmit_xdp_frame get the xdpi parameter of type
struct mlx5e_xdp_info for the sole purpose of calling
mlx5e_xdpi_fifo_push() on success.

This commit moves this call outside of xmit_xdp_frame, shifting this
responsibility to the caller. It will allow more fine-grained handling
of XDP info for cases when an xdp_frame is fragmented.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-18 13:51:13 -07:00
Maxim Mikityanskiy
ddc87e7d47 net/mlx5e: Store DMA address inside struct page
Use page_pool_set_dma_addr() to store the DMA address of a page inside
struct page, in order to avoid passing struct mlx5e_dma_info to XDP
handlers. Previously, struct mlx5e_dma_info was used to pass both the
DMA address and the page, and it worked well for the single-fragment
case.

When XDP multi buffer is in use, and a fragmented xdp_frame has to be
transmitted, the driver needs to know the DMA addresses of fragments,
however, the array of fragments in struct skb_shared_info doesn't
contain them. In order to pass the DMA addresses, the driver puts them
into struct page itself, which is accessible from the array of fragments
in struct skb_shared_info. The existing XDP handlers are modified to
remove the dependency on struct mlx5e_dma_info.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-18 13:51:13 -07:00
Maxim Mikityanskiy
ea5d49bdae net/mlx5e: Add XDP multi buffer support to the non-linear legacy RQ
This commit adds XDP multi buffer support to the RX path in the
non-linear legacy RQ mode. mlx5e_xdp_handle is called from
mlx5e_skb_from_cqe_nonlinear.

XDP_TX action for fragmented XDP frames is not yet supported and
blocked.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-18 13:51:12 -07:00
Maxim Mikityanskiy
d51f4a4cca net/mlx5e: Use page-sized fragments with XDP multi buffer
The implementation of XDP in mlx5e assumes that the frame size is equal
to the page size. Force this limitation in the non-linear mode for XDP
multi buffer.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-18 13:51:12 -07:00
Maxim Mikityanskiy
9cb9482ef1 net/mlx5e: Use fragments of the same size in non-linear legacy RQ with XDP
XDP multi buffer implementation in the kernel assumes that all fragments
have the same size. bpf_xdp_frags_increase_tail uses this assumption to
get the size of the last fragment, and __xdp_build_skb_from_frame uses
it to calculate truesize as nr_frags * xdpf->frame_sz.

The current implementation of mlx5e uses fragments of different size in
non-linear legacy RQ. Specifically, the last fragment can be larger than
the others. It's an optimization for packets smaller than MTU.

This commit adapts mlx5e to the kernel limitations and makes it use
fragments of the same size, in order to add support for XDP multi
buffer. The change is applied only if XDP is active, otherwise the old
optimization still applies.

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-18 13:51:12 -07:00
Maxim Mikityanskiy
4e8231f1c2 net/mlx5e: Prepare non-linear legacy RQ for XDP multi buffer support
mlx5e_skb_from_cqe_nonlinear creates an xdp_buff first, putting the
first fragment as the linear part, and the rest of fragments as
fragments to struct skb_shared_info in the tailroom. Then it creates an
SKB in place, based on the xdp_buff. The XDP program is not called in
this commit yet.

This commit contains no functional change, except the SKB is built over
the whole frag_stride of the first fragment, instead of the minimal size
required (headroom, data and skb_shared_info).

Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-03-18 13:51:11 -07:00
Julia Lawall
b7d174479c ath6kl: fix typos in comments
Various spelling mistakes in comments.
Detected with the help of Coccinelle.

Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220314115354.144023-4-Julia.Lawall@inria.fr
2022-03-18 17:38:45 +02:00
Minghao Chi
9503a1fc12 ath9k: Use platform_get_irq() to get the interrupt
It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ)
for requesting IRQ's resources any more, as they can be not ready yet in
case of DT-booting.

platform_get_irq() instead is a recommended way for getting IRQ even if
it was not retrieved earlier.

It also makes code simpler because we're getting "int" value right away
and no conversion from resource to int is required.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220314064501.2114002-1-chi.minghao@zte.com.cn
2022-03-18 17:37:56 +02:00
Carl Huang
a16d9b50cf ath11k: support GTK rekey offload
Host sets GTK related info to firmware before WoW is enabled, and
gets rekey replay_count and then disables GTK rekey when WoW quits.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1644308006-22784-7-git-send-email-quic_cjhuang@quicinc.com
2022-03-18 17:36:23 +02:00
Carl Huang
c3c36bfe99 ath11k: support ARP and NS offload
Support ARP and NS offload in WoW state.

Tested this way: put machine A with QCA6390 to WoW state,
ping/ping6 machine A from another machine B, check sniffer to see
any ARP response and Neighbour advertisement from machine A.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1644308006-22784-6-git-send-email-quic_cjhuang@quicinc.com
2022-03-18 17:36:02 +02:00
Carl Huang
90bf5c8d0f ath11k: purge rx pktlog when entering WoW
This change is to purge rx pktlog when entering WoW and reap
the mon_status buffer to keep it empty. When leaving WoW, host
restarts the reap timer. In WoW state, it's not allowed to feed
into mon_status rings per firmware team's recommendation.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1644308006-22784-5-git-send-email-quic_cjhuang@quicinc.com
2022-03-18 17:35:41 +02:00
Carl Huang
c417b247ba ath11k: implement hardware data filter
Host needs to set hardware data filter before entering WoW to
let firmware drop needless broadcast/mulitcast frames to avoid
frequent wakeup. Host clears hardware data filter when leaving WoW.

Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Carl Huang <quic_cjhuang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1644308006-22784-4-git-send-email-quic_cjhuang@quicinc.com
2022-03-18 17:35:20 +02:00