Commit graph

112,392 commits

Author SHA1 Message Date
Amit Cohen
4017d92964 mlxsw: spectrum_ptp: Rename mlxsw_sp_ptp_get_message_types()
Spectrum-1 and Spectrum-2 differ in their time stamping capabilities.
The former can be configured to time stamp only a subset of received PTP
events (e.g., only Sync), whereas the latter will time stamp all PTP
events or none.

In preparation for Spectrum-2 PTP support, rename the function that
parses the hardware time stamping configuration upon %SIOCSHWTSTAMP to
be Spectrum-1 specific.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:58:55 +01:00
Amit Cohen
9bfe3c16fc mlxsw: spectrum_ptp: Use 'struct mlxsw_sp_ptp_clock' per ASIC
Currently, there is one shared structure that holds the required
structures for PTP clock. Most of the existing fields are relevant only
for Spectrum-1 (cycles, timecounter, and more). Rename the structure to
be specific for Spectrum-1 and align the existing code. Add a common
structure which includes the structures which will be used also for
Spectrum-2. This structure will be returned from clock_init() operation,
as the definition is shared between all ASICs' operations.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:58:55 +01:00
Amit Cohen
e8fea346b5 mlxsw: spectrum_ptp: Use 'struct mlxsw_sp_ptp_state' per ASIC
Currently, there is one shared structure that holds the required
structures and details for PTP. Most of the existing fields are relevant
only for Spectrum-1 (hash table, lock for hash table, delayed work, and
more). Rename the structure to be specific for Spectrum-1 and align the
existing code. Add a common structure which includes
'struct mlxsw_sp *mlxsw_sp' and will be returned from ptp_init()
operation, as the definition is shared between all ASICs' operations.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:58:55 +01:00
Amit Cohen
9468322963 mlxsw: pci: Simplify FRC clock reading
Currently, the reading of FRC values (high and low) is done using macro
which calls to a function. In addition, to calculate the offset of FRC,
a simple macro is used. This code can be simplified by adding an helper
function and calculating the offset explicitly instead of using an
additional macro for that.

Add the helper function and convert the existing code. This helper will be
used later to read UTC clock.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:58:55 +01:00
Amit Cohen
22d950b79e mlxsw: spectrum_ptp: Initialize the clock to zero as part of initialization
As lately recommended in the mailing list[1], set the clock to zero time as
part of initialization.

The idea is that when the clock reads 'Jan 1, 1970', then it is clearly
wrong and user will not mistakenly think that the clock is set correctly.
If as part of initialization, the driver sets the clock, user might see
correct date and time (maybe with a small shift) and assume that there
is no need to sync the clock.

Fix the existing code of Spectrum-1 to set the 'timecounter' to zero.

[1]:
https://lore.kernel.org/netdev/20220201191041.GB7009@hoboy.vegasvil.org/

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:58:55 +01:00
Danielle Ratson
33a9583f9a mlxsw: Rename 'read_frc_capable' bit to 'read_clock_capable'
Rename the 'read_frc_capable' bit to 'read_clock_capable' since now it can
be both the FRC and UTC clocks.

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:58:55 +01:00
Amit Cohen
448e9cb363 mlxsw: resources: Add resource identifier for maximum number of FIDs
Add a resource identifier for maximum number of FIDs so that it could be
later used to query the information from firmware.

In Spectrum-2 and Spectrum-3, the correction field of PTP packets which are
sent as control packets is not updated at egress port. To overcome this
limitation, some packets will be sent as data packets. The header should
include FID, which is supposed to be 'Max FID + port - 1'. As preparation,
add the required resource, to be able to query the value from firmware
later.

Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:58:55 +01:00
Danielle Ratson
81016180e3 mlxsw: spectrum: Fix the shift of FID field in TX header
Currently, the field FID in TX header is defined, but is not used as it is
relevant only for data packets. mlxsw driver currently sends all
host-generated traffic as control packets and not as data packets.

In Spectrum-2 and Spectrum-3, the correction field of PTP packets which
are sent as control packets is not updated at egress port. To overcome this
limitation while adding support for PTP, some packets will be sent as data
packets.

Fix the wrong shift in the definition, to allow using the field later.

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:58:55 +01:00
Danielle Ratson
291fcb937e mlxsw: Set time stamp type as part of config profile
The type of time stamp field in the CQE is configured via the
CONFIG_PROFILE command during driver initialization. Add the definition
of the relevant fields to the command's payload and set the type to UTC
for Spectrum-2 and above. This configuration can be done as part of the
preparations to PTP support, as the type of the time stamp will not break
any existing behavior.

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:58:55 +01:00
Danielle Ratson
577d80238f mlxsw: cmd: Add UTC related fields to query firmware command
Add UTC sec and nsec PCI BAR and offset to query firmware command for a
future use.

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:58:55 +01:00
Danielle Ratson
aa98487cc9 mlxsw: pci_hw: Add 'time_stamp' and 'time_stamp_type' fields to CQEv2
The Completion Queue Element version 2 (CQEv2) includes various metadata
fields of packets.

Add 'time_stamp' and 'time_stamp_type' fields along with functions to
extract the seconds and nanoseconds for a future use.

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:58:55 +01:00
Danielle Ratson
731416e9ae mlxsw: reg: Add Monitoring Time Precision Correction Port Configuration Register
In Spectrum-2, all the packets are time stamped, the MTPCPC register is
used to configure the types of packets that will adjust the correction
field and which port will trap PTP packets.

If ingress correction is set on a port for a given packet type, then
when such a packet is received via the port, the current time stamp is
subtracted from the correction field.

If egress correction is set on a port for a given packet type, then when
such a packet is transmitted via the port, the current time stamp is
added to the correction field.

Assuming the systems is configured correctly, the above means that the
correction field will contain the transient delay between the ports.

Add this register for a future use in order to support PTP in Spectrum-2.

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:58:55 +01:00
Danielle Ratson
97b05cfb68 mlxsw: reg: Add MTUTC register's fields for supporting PTP in Spectrum-2
The MTUTC register configures the HW UTC counter.

Add the relevant fields and operations to support PTP in Spectrum-2 and
update mlxsw_reg_mtutc_pack() with the new fields for a future use.

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:58:55 +01:00
Danielle Ratson
1c358fedec mlxsw: Rename mlxsw_reg_mtptptp_pack() to mlxsw_reg_mtptpt_pack()
The right name of the register is MTPTPT, which refers to Monitoring
Precision Time Protocol Trap Register.

Therefore, rename the function mlxsw_reg_mtptptp_pack() to
mlxsw_reg_mtptpt_pack().

Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:58:54 +01:00
David S. Miller
e222dc8d84 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:

====================
pull request (net-next): ipsec-next 2022-07-20

1) Don't set DST_NOPOLICY in IPv4, a recent patch made this
   superfluous. From Eyal Birger.

2) Convert alg_key to flexible array member to avoid an iproute2
   compile warning when built with gcc-12.
   From Stephen Hemminger.

3) xfrm_register_km and xfrm_unregister_km do always return 0
   so change the type to void. From Zhengchao Shao.

4) Fix spelling mistake in esp6.c
   From Zhang Jiaming.

5) Improve the wording of comment above XFRM_OFFLOAD flags.
   From Petr Vaněk.

Please pull or let me know if there are problems.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 13:25:39 +01:00
Harini Katakam
8a1c9753f1 net: macb: Update tsu clk usage in runtime suspend/resume for Versal
On Versal TSU clock cannot be disabled irrespective of whether PTP is
used. Hence introduce a new Versal config structure with a "need tsu"
caps flag and check the same in runtime_suspend/resume before cutting
off clocks.

More information on this for future reference:
This is an IP limitation on versions 1p11 and 1p12 when Qbv is enabled
(See designcfg1, bit 3). However it is better to rely on an SoC specific
check rather than the IP version because tsu clk property itself may not
represent actual HW tsu clock on some chip designs.

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 12:29:54 +01:00
Harini Katakam
1d3ded6425 net: macb: Sort CAPS flags by bit positions
Sort capability flags by the bit position set.

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 12:29:54 +01:00
Jianglei Nie
c7b205fbbf net: macsec: fix potential resource leak in macsec_add_rxsa() and macsec_add_txsa()
init_rx_sa() allocates relevant resource for rx_sa->stats and rx_sa->
key.tfm with alloc_percpu() and macsec_alloc_tfm(). When some error
occurs after init_rx_sa() is called in macsec_add_rxsa(), the function
released rx_sa with kfree() without releasing rx_sa->stats and rx_sa->
key.tfm, which will lead to a resource leak.

We should call macsec_rxsa_put() instead of kfree() to decrease the ref
count of rx_sa and release the relevant resource if the refcount is 0.
The same bug exists in macsec_add_txsa() for tx_sa as well. This patch
fixes the above two bugs.

Fixes: 3cf3227a21 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 11:51:05 +01:00
Sabrina Dubroca
c630d1fe62 macsec: always read MACSEC_SA_ATTR_PN as a u64
Currently, MACSEC_SA_ATTR_PN is handled inconsistently, sometimes as a
u32, sometimes forced into a u64 without checking the actual length of
the attribute. Instead, we can use nla_get_u64 everywhere, which will
read up to 64 bits into a u64, capped by the actual length of the
attribute coming from userspace.

This fixes several issues:
 - the check in validate_add_rxsa doesn't work with 32-bit attributes
 - the checks in validate_add_txsa and validate_upd_sa incorrectly
   reject X << 32 (with X != 0)

Fixes: 48ef50fa86 ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 11:49:25 +01:00
Sabrina Dubroca
b07a0e2044 macsec: limit replay window size with XPN
IEEE 802.1AEbw-2013 (section 10.7.8) specifies that the maximum value
of the replay window is 2^30-1, to help with recovery of the upper
bits of the PN.

To avoid leaving the existing macsec device in an inconsistent state
if this test fails during changelink, reuse the cleanup mechanism
introduced for HW offload. This wasn't needed until now because
macsec_changelink_common could not fail during changelink, as
modifying the cipher suite was not allowed.

Finally, this must happen after handling IFLA_MACSEC_CIPHER_SUITE so
that secy->xpn is set.

Fixes: 48ef50fa86 ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 11:49:25 +01:00
Sabrina Dubroca
3240eac4ff macsec: fix error message in macsec_add_rxsa and _txsa
The expected length is MACSEC_SALT_LEN, not MACSEC_SA_ATTR_SALT.

Fixes: 48ef50fa86 ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 11:49:25 +01:00
Sabrina Dubroca
f46040eeaf macsec: fix NULL deref in macsec_add_rxsa
Commit 48ef50fa86 added a test on tb_sa[MACSEC_SA_ATTR_PN], but
nothing guarantees that it's not NULL at this point. The same code was
added to macsec_add_txsa, but there it's not a problem because
validate_add_txsa checks that the MACSEC_SA_ATTR_PN attribute is
present.

Note: it's not possible to reproduce with iproute, because iproute
doesn't allow creating an SA without specifying the PN.

Fixes: 48ef50fa86 ("macsec: Netlink support of XPN cipher suites (IEEE 802.1AEbw)")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208315
Reported-by: Frantisek Sumsal <fsumsal@redhat.com>
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 11:49:25 +01:00
Slark Xiao
2540d3c999 net: ipa: Fix typo 'the the' in comment
Replace 'the the' with 'the' in the comment.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 10:52:28 +01:00
Slark Xiao
af35f95aca nfp: bpf: Fix typo 'the the' in comment
Replace 'the the' with 'the' in the comment.

Signed-off-by: Slark Xiao <slark_xiao@163.com>
Acked-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 10:52:28 +01:00
Lorenzo Bianconi
84b9cd3890 net: ethernet: mtk_eth_soc: add support for page_pool_get_stats
Introduce support for the page_pool stats API into mtk_eth_soc driver.
Report page_pool stats through ethtool.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 10:38:57 +01:00
Lorenzo Bianconi
5886d26fd2 net: ethernet: mtk_eth_soc: add xmit XDP support
Introduce XDP support for XDP_TX verdict and ndo_xdp_xmit function
pointer.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 10:38:57 +01:00
Lorenzo Bianconi
916a6ee836 net: ethernet: mtk_eth_soc: introduce xdp ethtool counters
Report xdp stats through ethtool

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 10:38:57 +01:00
Lorenzo Bianconi
7c26c20da5 net: ethernet: mtk_eth_soc: add basic XDP support
Introduce basic XDP support to mtk_eth_soc driver.
Supported XDP verdicts:
- XDP_PASS
- XDP_DROP
- XDP_REDIRECT

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 10:38:57 +01:00
Lorenzo Bianconi
23233e577e net: ethernet: mtk_eth_soc: rely on page_pool for single page buffers
Rely on page_pool allocator for single page buffers in order to keep
them dma mapped and add skb recycling support.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-25 10:38:57 +01:00
Jakub Kicinski
502c6f8ced Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
100GbE Intel Wired LAN Driver Updates 2022-07-21

This series contains updates to ice driver only.

Karol adds implementation for GNSS write; data is written to the GNSS
module through TTY device using u-blox UBX protocol.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  ice: add write functionality for GNSS TTY
  ice: add i2c write command
====================

Link: https://lore.kernel.org/r/20220721202842.3276257-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22 21:55:57 -07:00
Justin Chen
5050531610 net: usb: ax88179_178a: wol optimizations
- Check if wol is supported on reset instead of everytime get_wol
is called.
- Save wolopts in private data instead of relying on the HW to save it.
- Defer enabling WoL until suspend instead of enabling it everytime
set_wol is called.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22 21:43:59 -07:00
Justin Chen
2bcbd3d8a7 net: usb: ax88179_178a: move priv to driver_priv
We need more space to save WoL context. So lets allocate memory
for ax88179_data instead of using struct usbnet data field which
only supports 5 words. We continue to use the struct usbnet data
field for multicast filters. However since we no longer have the
private data stored there, we can shift it to the beginning.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22 21:43:59 -07:00
Justin Chen
c4bf747c68 net: usb: ax88179_178a: restore state on resume
The hardware state was only partially restored, which meant certain
functionality was broken on resume. Do a full HW reset on resume to
fix this.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22 21:43:58 -07:00
Justin Chen
843f92052d net: usb: ax88179_178a: clean up pm calls
Instead of passing in_pm flags all over the place, use the private
struct to handle in_pm mode.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22 21:43:58 -07:00
Justin Chen
9718f9ce5b net: usb: ax88179_178a: remove redundant init code
Bind and reset are basically doing the same thing. Remove the duplicate
code and have bind call into reset.

Signed-off-by: Justin Chen <justinpopo6@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22 21:43:58 -07:00
Jiri Pirko
1b5995e370 mlxsw: core: Fix use-after-free calling devl_unlock() in mlxsw_core_bus_device_unregister()
Do devl_unlock() before freeing the devlink in
mlxsw_core_bus_device_unregister() function.

Reported-by: Ido Schimmel <idosch@nvidia.com>
Fixes: 72a4c8c94e ("mlxsw: convert driver to use unlocked devlink API during init/fini")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220721142424.3975704-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-22 14:41:24 -07:00
Avinash Dayanand
40e589ba13 iavf: Check for duplicate TC flower filter before parsing
Record of all the TC flower filters are kept for local book keeping, so
take advantage of that and check for duplicate filter even before sending
a request to the PF driver.

Signed-off-by: Avinash Dayanand <avinash.dayanand@intel.com>
Signed-off-by: Jun Zhang <xuejun.zhang@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-22 10:25:51 -07:00
Przemyslaw Patynowski
2313e69c84 i40e: Refactor tc mqprio checks
Refactor bitwise checks for whether TC MQPRIO is enabled
into one single method for improved readability.

Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-07-22 10:01:00 -07:00
Johannes Berg
c204d9df02 wifi: mac80211_hwsim: handle links for wmediumd/virtio
For wmediumd/virtio, handle both the RX channel for links,
as well as the link addresses when links are added/removed.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22 14:28:20 +02:00
Johannes Berg
e4c9050a0d wifi: mac80211_hwsim: fix address translation for MLO
There are two issues here: we need to do the translation
even in case mac80211 selected a link, and we should only
translate the A3 if it's the BSSID. Fix both.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-07-22 14:27:56 +02:00
Edward Cree
84e7fc2591 sfc: attach/detach EF100 representors along with their owning PF
Since representors piggy-back on the PF's queues for TX, they can
 only accept new TXes while the PF is up.  Thus, any operation which
 detaches the PF must first detach all its VFreps.

Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 12:50:06 +01:00
Edward Cree
f72c38fad2 sfc: hook up ef100 representor TX
Implement .ndo_start_xmit() by calling into the parent PF's TX path.

Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 12:50:06 +01:00
Edward Cree
02443ab8c9 sfc: support passing a representor to the EF100 TX path
A non-null efv in __ef100_enqueue_skb() indicates that the packet is
 from that representor, should be transmitted with a suitable option
 descriptor (to instruct the switch to deliver it to the representee),
 and should not be accounted to the parent PF's stats or BQL.

Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 12:50:06 +01:00
Edward Cree
da56552d04 sfc: determine representee m-port for EF100 representors
An MAE port, or m-port, is a port (source/destination for traffic) on
 the Match-Action Engine (the internal switch on EF100).
Representors will use their representee's m-port for two purposes: as
 a destination override on TX from the representor, and as a source
 match in 'default rules' to steer representee traffic (when not
 matched by e.g. a TC flower rule) to representor RX via the parent
 PF's receive queue.

Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 12:50:06 +01:00
Edward Cree
e1479556f8 sfc: phys port/switch identification for ef100 reps
Requires storing VF index in struct efx_rep.

Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 12:50:06 +01:00
Edward Cree
5687eb3466 sfc: add basic ethtool ops to ef100 reps
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 12:50:06 +01:00
Edward Cree
08135eecd0 sfc: add skeleton ef100 VF representors
No net_device_ops yet, just a placeholder netdev created per VF.

Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 12:50:06 +01:00
Edward Cree
95287e1b4e sfc: detect ef100 MAE admin privilege/capability at probe time
One PCIe function per network port (more precisely, per m-port group) is
 responsible for configuring the Match-Action Engine which performs
 switching and packet modification in the slice to support flower/OVS
 offload.  The GRP_MAE bit in the privilege mask indicates whether a
 given function has this capability.
At probe time, call MCDIs to read the calling function's privilege mask,
 and store the GRP_MAE bit in a new ef100_nic_data member.

Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 12:50:06 +01:00
Edward Cree
8ca353da9c sfc: update EF100 register descriptions
Signed-off-by: Edward Cree <ecree.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 12:50:06 +01:00
Juhee Kang
c497885e30 net: marvell: prestera: use netif_is_any_bridge_port instead of open code
The open code which is netif_is_bridge_port() || netif_is_ovs_port() is
defined as a new helper function on netdev.h like netif_is_any_bridge_port
that can check both IFF flags in 1 go. So use netif_is_any_bridge_port()
function instead of open code. This patch doesn't change logic.

Signed-off-by: Juhee Kang <claudiajkang@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-07-22 12:35:45 +01:00