Commit graph

112,392 commits

Author SHA1 Message Date
Vlad Buslov
04f8c12f03 net/mlx5: Bridge, take rtnl lock in init error handler
The mlx5_esw_bridge_cleanup() is expected to be called with rtnl lock
taken, which is true for mlx5e_rep_bridge_cleanup() function but not for
error handling code in mlx5e_rep_bridge_init(). Add missing rtnl
lock/unlock calls and extend both mlx5_esw_bridge_cleanup() and its dual
function mlx5_esw_bridge_init() with ASSERT_RTNL() to verify the invariant
from now on.

Fixes: 7cd6a54a82 ("net/mlx5: Bridge, handle FDB events")
Fixes: 19e9bfa044 ("net/mlx5: Bridge, add offload infrastructure")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2022-02-01 20:59:38 -08:00
Jakub Kicinski
c7108979a0 Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-01-31

This series contains updates to i40e driver only.

Jedrzej fixes a condition check which would cause an error when
resetting bandwidth when DCB is active with one TC.

Karen resolves a null pointer dereference that could occur when removing
the driver while VSI rings are being disabled.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: Fix reset path while removing the driver
  i40e: Fix reset bw limit when DCB enabled with 1 TC
====================

Link: https://lore.kernel.org/r/20220201000522.505909-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01 20:39:47 -08:00
Martin Habets
000fe940e5 sfc: The size of the RX recycle ring should be more flexible
Ideally the size would depend on the link speed, but the recycle
ring is created when the interface is brought up before the driver
knows the link speed. So size it for the maximum speed of a given NIC.
PowerPC is only supported on SFN7xxx and SFN8xxx NICs.

With this patch on a 40G NIC the number of calls to alloc_pages and
friends went down from about 18% to under 2%.
On a 10G NIC the number of calls to alloc_pages and friends went down
from about 15% to 0 (perf did not capture any calls during the 60
second test).
On a 100G NIC the number of calls to alloc_pages and friends went down
from about 23% to 4%.

Reported-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220131111054.cp4f6foyinaarwbn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01 20:34:59 -08:00
Lior Nahmanson
d0cfa548db net: macsec: Verify that send_sci is on when setting Tx sci explicitly
When setting Tx sci explicit, the Rx side is expected to use this
sci and not recalculate it from the packet.However, in case of Tx sci
is explicit and send_sci is off, the receiver is wrongly recalculate
the sci from the source MAC address which most likely be different
than the explicit sci.

Fix by preventing such configuration when macsec newlink is established
and return EINVAL error code on such cases.

Fixes: c09440f7dc ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Link: https://lore.kernel.org/r/1643542672-29403-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01 20:32:20 -08:00
Heiner Kallweit
68650b4e6c r8169: support L1.2 control on RTL8168h
According to Realtek RTL8168h supports the same L1.2 control as RTL8125.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/4784d5ce-38ac-046a-cbfa-5fdd9773f820@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01 20:27:43 -08:00
Georgi Valkov
63e4b45c82 ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback
When rx_buf is allocated we need to account for IPHETH_IP_ALIGN,
which reduces the usable size by 2 bytes. Otherwise we have 1512
bytes usable instead of 1514, and if we receive more than 1512
bytes, ipheth_rcvbulk_callback is called with status -EOVERFLOW,
after which the driver malfunctiones and all communication stops.

Resolves ipheth 2-1:4.2: ipheth_rcvbulk_callback: urb status: -75

Fixes: f33d9e2b48 ("usbnet: ipheth: fix connectivity with iOS 14")
Signed-off-by: Georgi Valkov <gvalkov@abv.bg>
Tested-by: Jan Kiszka <jan.kiszka@siemens.com>
Link: https://lore.kernel.org/all/B60B8A4B-92A0-49B3-805D-809A2433B46C@abv.bg/
Link: https://lore.kernel.org/all/24851bd2769434a5fc24730dce8e8a984c5a4505.1643699778.git.jan.kiszka@siemens.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01 20:25:38 -08:00
Jakub Kicinski
6dde7acdb3 ethernet: smc911x: fix indentation in get/set EEPROM
Build bot produced a smatch indentation warning,
the code looks correct but it mixes spaces and tabs.

Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20220131211730.3940875-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-01 19:59:03 -08:00
Sasha Neftin
cad014b7b5 e1000e: Handshake with CSME starts from ADL platforms
Handshake with CSME/AMT on none provisioned platforms during S0ix flow
is not supported on TGL platform and can cause to HW unit hang. Update
the handshake with CSME flow to start from the ADL platform.

Fixes: 3e55d23171 ("e1000e: Add handshake with the CSME to support S0ix")
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-01 08:59:51 -08:00
Sasha Neftin
68defd528f e1000e: Separate ADP board type from TGP
We have the same LAN controller on different PCH's. Separate ADP board
type from a TGP which will allow for specific fixes to be applied for
ADP platforms.

Suggested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Sasha Neftin <sasha.neftin@intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-02-01 08:59:45 -08:00
Horatiu Vultur
966f2e1a4a net: lan966x: Implement get_ts_info
Implement the function get_ts_info in ethtool_ops which is needed to get
the HW capabilities for timestamping.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01 14:18:44 +00:00
Horatiu Vultur
e85a96e48e net: lan966x: Add support for ptp interrupts
When doing 2-step timestamping the HW will generate an interrupt when it
managed to timestamp a frame. It is the SW responsibility to read it
from the FIFO.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01 14:18:43 +00:00
Horatiu Vultur
77eecf25bd net: lan966x: Update extraction/injection for timestamping
Update both the extraction and injection to do timestamping of the
frames. The extraction is always doing the timestamping while for
injection is doing the timestamping only if it is configured.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01 14:18:43 +00:00
Horatiu Vultur
735fec995b net: lan966x: Implement SIOCSHWTSTAMP and SIOCGHWTSTAMP
Implement the ioctl callbacks SIOCSHWTSTAMP and SIOCGHWTSTAMP to allow
to configure the ports to enable/disable timestamping for TX. The RX
timestamping is always enabled. The HW is capable to run both 1-step
timestamping and 2-step timestamping.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01 14:18:43 +00:00
Horatiu Vultur
d096459494 net: lan966x: Add support for ptp clocks
The lan966x has 3 PHC. Enable each of them, for now all the
timestamping is happening on the first PHC.

Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01 14:18:43 +00:00
Horatiu Vultur
d700dff41d net: lan966x: Add registers that are use for ptp functionality
Add the registers that will be used to configure the PHC in the HW.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01 14:18:43 +00:00
David S. Miller
1d02c03986 Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next
-queue

Tony Nguyen says:

====================
10GbE Intel Wired LAN Driver Updates 2022-01-31

Alexander Lobakin says:

This is an interpolation of [0] to other Intel Ethernet drivers
(and is (re)based on its code).
The main aim is to keep XDP metadata not only in case with
build_skb(), but also when we do napi_alloc_skb() + memcpy().

All Intel drivers suffers from the same here:
 - metadata gets lost on XDP_PASS in legacy-rx;
 - excessive headroom allocation on XSK Rx to skbs;
 - metadata gets lost on XSK Rx to skbs.

Those get especially actual in XDP Hints upcoming.
I couldn't have addressed the first one for all Intel drivers due to
that they don't reserve any headroom for now in legacy-rx mode even
with XDP enabled. This is hugely wrong, but requires quite a bunch
of work and a separate series. Luckily, ice doesn't suffer from
that.
igc has 1 and 3 already fixed in [0].

[0] https://lore.kernel.org/netdev/163700856423.565980.10162564921347693758.stgit@firesoul
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01 12:53:18 +00:00
Hector Martin
b4bb8469e9 brcmfmac: pcie: Read the console on init and shutdown
This allows us to get console messages if the firmware crashed during
early init, or if an operation failed and we're about to shut down.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-10-marcan@marcan.st
2022-02-01 14:27:08 +02:00
Hector Martin
e7191182ad brcmfmac: fwil: Constify iovar name arguments
Make all the iovar name arguments const char * instead of just char *.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-9-marcan@marcan.st
2022-02-01 14:27:07 +02:00
Hector Martin
9cf6d7f2c5 brcmfmac: of: Use devm_kstrdup for board_type & check for errors
This was missing a NULL check, and we can collapse the strlen/alloc/copy
into a devm_kstrdup().

Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-8-marcan@marcan.st
2022-02-01 14:27:07 +02:00
Hector Martin
b50255c83b brcmfmac: pcie: Fix crashes due to early IRQs
The driver was enabling IRQs before the message processing was
initialized. This could cause IRQs to come in too early and crash the
driver. Instead, move the IRQ enable and hostready to a bus preinit
function, at which point everything is properly initialized.

Fixes: 9e37f045d5 ("brcmfmac: Adding PCIe bus layer support.")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-7-marcan@marcan.st
2022-02-01 14:27:06 +02:00
Hector Martin
9466987f24 brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toio
The alignment check was wrong (e.g. & 4 instead of & 3), and the logic
was also inefficient if the length was not a multiple of 4, since it
would needlessly fall back to copying the entire buffer bytewise.

We already have a perfectly good memcpy_toio function, so just call that
instead of rolling our own copy logic here. brcmf_pcie_init_ringbuffers
was already using it anyway.

Fixes: 9e37f045d5 ("brcmfmac: Adding PCIe bus layer support.")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-6-marcan@marcan.st
2022-02-01 14:27:05 +02:00
Hector Martin
6d766d8cb5 brcmfmac: pcie: Declare missing firmware files in pcie.c
Move one of the declarations from sdio.c to pcie.c, since it makes no
sense in the former (SDIO support is optional), and add missing ones.

Fixes: 75729e110e ("brcmfmac: expose firmware config files through modinfo")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-5-marcan@marcan.st
2022-02-01 14:27:05 +02:00
Hector Martin
d19d8e3ba2 brcmfmac: firmware: Allocate space for default boardrev in nvram
If boardrev is missing from the NVRAM we add a default one, but this
might need more space in the output buffer than was allocated. Ensure
we have enough padding for this in the buffer.

Fixes: 46f2b38a91 ("brcmfmac: insert default boardrev in nvram data if missing")
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-3-marcan@marcan.st
2022-02-01 14:27:04 +02:00
Hector Martin
5e90f0f3ea brcmfmac: pcie: Release firmwares in the brcmf_pcie_setup error path
This avoids leaking memory if brcmf_chip_get_raminfo fails. Note that
the CLM blob is released in the device remove path.

Fixes: 82f93cf46d ("brcmfmac: get chip's default RAM info during PCIe setup")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Hector Martin <marcan@marcan.st>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220131160713.245637-2-marcan@marcan.st
2022-02-01 14:27:04 +02:00
Colin Ian King
e80affde17 rtlwifi: remove redundant initialization of variable ul_encalgo
Variable ul_encalgo is initialized with a value that is never read,
it is being re-assigned a new value in every case in the following
switch statement. The initialization is redundant and can be removed.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220130223714.6999-1-colin.i.king@gmail.com
2022-02-01 14:26:34 +02:00
Jiasheng Jiang
7e47607133 ray_cs: Check ioremap return value
As the possible failure of the ioremap(), the 'local->sram' and other
two could be NULL.
Therefore it should be better to check it in order to avoid the later
dev_dbg.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211230022926.1846757-1-jiasheng@iscas.ac.cn
2022-02-01 14:24:35 +02:00
Jonathan McDowell
881cc731df net: phy: Fix qca8081 with speeds lower than 2.5Gb/s
A typo in qca808x_read_status means we try to set SMII mode on the port
rather than SGMII when the link speed is not 2.5Gb/s. This results in no
traffic due to the mismatch in configuration between the phy and the
mac.

v2:
 Only change interface mode when the link is up

Fixes: 79c7bc0521 ("net: phy: add qca8081 read_status")
Cc: stable@vger.kernel.org
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-01 11:57:09 +00:00
John Crispin
fe98a6137d ath11k: add debugfs for TWT debug calls
New debugfs files to manually add/delete/pause/resume TWT
dialogs for test/debug purposes.

The debugfs files expect the following parameters
- Add dialog
echo '<Peer_MAC> <Dialog_ID> <Wake_Interval_Usec> <Wake_Interval_Mantis>
 <Wake_Duration_Usec> <First_SP_Offset> <TWT_Command>
 <1:Broadcast /0:Individual> <1:Triggered / 0:Untriggered>
 <1:Unannounced /0:Announced> <1:Protected / 0:Unprotected>' >
 /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/add_dialog

Example (Non-triggered and un-announced):
echo '00:03:7F:20:13:52 1 102400 100 30720 20480 4 0 0 1 0' >
 /sys/kernel/debug/ieee80211/phy0/netdev:wlan0/twt/add_dialog

- Delete dialog
echo '<Peer_MAC> <Dialog_ID>' >
 /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/del_dialog

- Pause dialog
echo '<Peer_MAC> <Dialog_ID>' >
 /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/pause_dialog

- Resume dialog
echo '<Peer_MAC> <Dialog_ID> <SP_Offset_Usec> <Next_TWT_Size>' >
 /sys/kernel/debug/ieee80211/phyX/netdev:wlanX/twt/resume_dialog

Example:
echo '00:03:7F:20:13:52 1 2000000 3' >
 /sys/kernel/debug/ieee80211/phy0/netdev:wlan0/twt/resume_dialog

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01179-QCAHKSWPL_SILICONZ-1
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220131031043.1295-2-alokad@codeaurora.org
2022-02-01 12:57:08 +02:00
John Crispin
3d00e8b5b8 ath11k: add WMI calls to manually add/del/pause/resume TWT dialogs
These calls are used for debugging and will be required for WFA
certification tests.

Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.5.0.1-01179-QCAHKSWPL_SILICONZ-1
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220131031043.1295-1-alokad@codeaurora.org
2022-02-01 12:57:07 +02:00
Seevalamuthu Mariappan
f295ad9129 ath11k: Add debugfs interface to configure firmware debug log level
Add debugfs interface "fw_dbglog_config" to configure firmware log level.
Configuration is done via WMI command WMI_DBGLOG_CFG_CMDID.

Command to configure,
echo "<dbglog_param> <values>" >
/sys/kernel/debug/ath11k/<hw>/macX/fw_dbglog_config

where dbglog_param can be,
  1) WMI_DEBUG_LOG_PARAM_LOG_LEVEL - configure log level for a given module
     here, <values> = <0xaaaa00bb>, 'aaaa' - module id and 'bb' - loglevel
  2) WMI_DEBUG_LOG_PARAM_VDEV_ENABLE - enable debug log for a given vdev
     here, <values> = vdev_id
  3) WMI_DEBUG_LOG_PARAM_VDEV_DISABLE - disable debug log for a given vdev
     except ERROR logs
     here, <values> = vdev_id
  4) WMI_DEBUG_LOG_PARAM_VDEV_ENABLE_BITMAP - set vdev enable bitmap
       here, <values> = vdev_enable_bitmap
  5) WMI_DEBUG_LOG_PARAM_MOD_ENABLE_BITMAP - set a given log level to all the
     modules specified in the module bitmap. Command to configure for this log param,

     $ echo "5 <values> <module_id_index> <is_end>" >
         /sys/kernel/debug/ath11k/<hw>/macX/fw_dbglog_config
     here,
                <values> = <0xaaaaaaaa000000bb>, 'aaaaaaaa' - module bitmap and
                          'bb' - loglevel
                <module_id_index> = index of module bitmap. Max module id is 512.
                                    So, module_id_index is 0-15.
                <is_end> = to indicate if more configuration to follow.

  6) WMI_DEBUG_LOG_PARAM_WOW_MOD_ENABLE_BITMAP - Wow mode specific logging enable.
     Command to configure for this log param,

      $ echo "6 <values> <module_id_index> <is_end>" >
          /sys/kernel/debug/ath11k/<hw>/macX/fw_dbglog_config
      here,
                 <values> = <0xaaaaaaaa000000bb>, 'aaaaaaaa' - module bitmap and
                              'bb' - loglevel
                 <module_id_index> = index of module bitmap. Max module id is 512.
                                     So, module_id_index is 0-15.
                 <is_end> = to indicate if more configuration to follow.

Sample command usage,

To enable module WLAN_MODULE_WMI and log level ATH11K_FW_DBGLOG_VERBOSE,
echo "1 0x10001" > /sys/kernel/debug/ath11k/<hw>/macX/fw_dbglog_config

To enable module bit map from 32 to 63 and log level ATH11K_FW_DBGLOG_VERBOSE,
echo "5 0xffffffff00000001 1 1" > /sys/kernel/debug/ath11k/<hw>/macX/fw_dbglog_config

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01734-QCAHKSWPL_SILICONZ-1

Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/1642405103-32302-1-git-send-email-quic_seevalam@quicinc.com
2022-02-01 12:56:14 +02:00
Sergey Shtylyov
9a90986efc sh_eth: kill useless initializers in sh_eth_{suspend|resume}()
sh_eth_{suspend|resume}() initialize their local variable 'ret' to 0 but
this value is never really used, thus we can kill those intializers...

Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/f09d7c64-4a2b-6973-09a4-10d759ed0df4@omp.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31 21:37:24 -08:00
Hyeonggon Yoo
7354a426e0 net: ena: Do not waste napi skb cache
By profiling, discovered that ena device driver allocates skb by
build_skb() and frees by napi_skb_cache_put(). Because the driver
does not use napi skb cache in allocation path, napi skb cache is
periodically filled and flushed. This is waste of napi skb cache.

As ena_alloc_skb() is called only in napi, Use napi_build_skb()
and napi_alloc_skb() when allocating skb.

This patch was tested on aws a1.metal instance.

[ jwiedmann.dev@gmail.com: Use napi_alloc_skb() instead of
  netdev_alloc_skb_ip_align() to keep things consistent. ]

Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: Shay Agroskin <shayagr@amazon.com>
Link: https://lore.kernel.org/r/YfUAkA9BhyOJRT4B@ip-172-31-19-208.ap-northeast-1.compute.internal
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31 21:36:21 -08:00
Lior Nahmanson
9cef24c8b7 net: macsec: Fix offload support for NETDEV_UNREGISTER event
Current macsec netdev notify handler handles NETDEV_UNREGISTER event by
releasing relevant SW resources only, this causes resources leak in case
of macsec HW offload, as the underlay driver was not notified to clean
it's macsec offload resources.

Fix by calling the underlay driver to clean it's relevant resources
by moving offload handling from macsec_dellink() to macsec_common_dellink()
when handling NETDEV_UNREGISTER event.

Fixes: 3cf3227a21 ("net: macsec: hardware offloading infrastructure")
Signed-off-by: Lior Nahmanson <liorna@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Antoine Tenart <atenart@kernel.org>
Link: https://lore.kernel.org/r/1643542141-28956-1-git-send-email-raeds@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31 21:33:10 -08:00
Venkata Sudheer Kumar Bhavaraju
ef10bd49df qed: use msleep() in qed_mcp_cmd() and add qed_mcp_cmd_nosleep() for udelay.
Change qed_mcp_cmd() to use msleep() (by setting QED_MB_FLAG_CAN_SLEEP
flag) and add new nosleep() version of the api. These api are used to
issue cmds to management fw and the change affects how driver
behaves while waiting for a response/resource.

All sleepable callers of the existing api now use msleep() version. For
non-sleepable callers, the new nosleep() version is explicitly used.

Signed-off-by: Venkata Sudheer Kumar Bhavaraju <vbhavaraju@marvell.com>
Signed-off-by: Alok Prasad <palok@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Link: https://lore.kernel.org/r/20220131005235.1647881-1-vbhavaraju@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31 21:24:35 -08:00
Camel Guo
7af037c39b net: stmmac: dump gmac4 DMA registers correctly
Unlike gmac100, gmac1000, gmac4 has 27 DMA registers and they are
located at DMA_CHAN_BASE_ADDR (0x1100). In order for ethtool to dump
gmac4 DMA registers correctly, this commit checks if a net_device has
gmac4 and uses different logic to dump its DMA registers.

This fixes the following KASAN warning, which can normally be triggered
by a command similar like "ethtool -d eth0":

BUG: KASAN: vmalloc-out-of-bounds in dwmac4_dump_dma_regs+0x6d4/0xb30
Write of size 4 at addr ffffffc010177100 by task ethtool/1839
 kasan_report+0x200/0x21c
 __asan_report_store4_noabort+0x34/0x60
 dwmac4_dump_dma_regs+0x6d4/0xb30
 stmmac_ethtool_gregs+0x110/0x204
 ethtool_get_regs+0x200/0x4b0
 dev_ethtool+0x1dac/0x3800
 dev_ioctl+0x7c0/0xb50
 sock_ioctl+0x298/0x6c4
 ...

Fixes: fbf68229ff ("net: stmmac: unify registers dumps methods")
Signed-off-by: Camel Guo <camelg@axis.com>
Link: https://lore.kernel.org/r/20220131083841.3346801-1-camel.guo@axis.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31 21:21:10 -08:00
Arınç ÜNAL
4223f86512 net: dsa: mt7530: make NET_DSA_MT7530 select MEDIATEK_GE_PHY
Make MediaTek MT753x DSA driver enable MediaTek Gigabit PHYs driver to
properly control MT7530 and MT7531 switch PHYs.

A noticeable change is that the behaviour of switchport interfaces going
up-down-up-down is no longer there.

Fixes: b8f126a8d5 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220129062703.595-1-arinc.unal@arinc9.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31 21:18:17 -08:00
Karen Sornek
6533e558c6 i40e: Fix reset path while removing the driver
Fix the crash in kernel while dereferencing the NULL pointer,
when the driver is unloaded and simultaneously the VSI rings
are being stopped.

The hardware requires 50msec in order to finish RX queues
disable. For this purpose the driver spins in mdelay function
for the operation to be completed.

For example changing number of queues which requires reset would
fail in the following call stack:

1) i40e_prep_for_reset
2) i40e_pf_quiesce_all_vsi
3) i40e_quiesce_vsi
4) i40e_vsi_close
5) i40e_down
6) i40e_vsi_stop_rings
7) i40e_vsi_control_rx -> disable requires the delay of 50msecs
8) continue back in i40e_down function where
   i40e_clean_tx_ring(vsi->tx_rings[i]) is going to crash

When the driver was spinning vsi_release called
i40e_vsi_free_arrays where the vsi->tx_rings resources
were freed and the pointer was set to NULL.

Fixes: 5b6d4a7f20 ("i40e: Fix crash during removing i40e driver")
Signed-off-by: Slawomir Laba <slawomirx.laba@intel.com>
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31 14:15:07 -08:00
Jedrzej Jagielski
3d2504663c i40e: Fix reset bw limit when DCB enabled with 1 TC
There was an AQ error I40E_AQ_RC_EINVAL when trying
to reset bw limit as part of bw allocation setup.
This was caused by trying to reset bw limit with
DCB enabled. Bw limit should not be reset when
DCB is enabled. The code was relying on the pf->flags
to check if DCB is enabled but if only 1 TC is available
this flag will not be set even though DCB is enabled.
Add a check for number of TC and if it is 1
don't try to reset bw limit even if pf->flags shows
DCB as disabled.

Fixes: fa38e30ac7 ("i40e: Fix for Tx timeouts when interface is brought up if DCB is enabled")
Suggested-by: Alexander Lobakin <alexandr.lobakin@intel.com> # Flatten the condition
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Imam Hassan Reza Biswas <imam.hassan.reza.biswas@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31 13:24:09 -08:00
Alexander Lobakin
f322a620be ixgbe: respect metadata on XSK Rx to skb
For now, if the XDP prog returns XDP_PASS on XSK, the metadata
will be lost as it doesn't get copied to the skb.

Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.

net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match ixgbe_construct_skb().

Fixes: d0bcacd0a1 ("ixgbe: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31 09:50:20 -08:00
Alexander Lobakin
8f405221a7 ixgbe: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, ixgbe_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.

Fixes: d0bcacd0a1 ("ixgbe: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31 09:47:21 -08:00
Alexander Lobakin
1fbdaa1338 ixgbe: pass bi->xdp to ixgbe_construct_skb_zc() directly
To not dereference bi->xdp each time in ixgbe_construct_skb_zc(),
pass bi->xdp as an argument instead of bi. We can also call
xsk_buff_free() outside of the function as well as assign bi->xdp
to NULL, which seems to make it closer to its name.

Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31 09:47:21 -08:00
Alexander Lobakin
f9e61d365b igc: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, igc_construct_skb_zc() currently allocates and reserves
additional `xdp->data_meta - xdp->data_hard_start`, which is about
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only (+ meta) to
__napi_alloc_skb() and don't reserve anything. This will give
enough headroom for stack processing.
Also, net_prefetch() xdp->data_meta and align the copy size to
speed-up memcpy() a little and better match igc_construct_skb().

Fixes: fc9df2a0b5 ("igc: Enable RX via AF_XDP zero-copy")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31 09:47:13 -08:00
Alexander Lobakin
45a34ca680 ice: respect metadata on XSK Rx to skb
For now, if the XDP prog returns XDP_PASS on XSK, the metadata will
be lost as it doesn't get copied to the skb.

Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.

net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match ice_construct_skb().

Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31 09:46:05 -08:00
Alexander Lobakin
dc44572d19 ice: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, ice_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.

Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31 09:43:35 -08:00
Alexander Lobakin
ee803dca96 ice: respect metadata in legacy-rx/ice_construct_skb()
In "legacy-rx" mode represented by ice_construct_skb(), we can
still use XDP (and XDP metadata), but after XDP_PASS the metadata
will be lost as it doesn't get copied to the skb.
Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.
Point net_prefetch() to xdp->data_meta instead of data. This won't
change anything when the meta is not here, but will save some cache
misses otherwise.

Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31 09:43:35 -08:00
Alexander Lobakin
6dba29537c i40e: respect metadata on XSK Rx to skb
For now, if the XDP prog returns XDP_PASS on XSK, the metadata will
be lost as it doesn't get copied to the skb.

Copy it along with the frame headers. Account its size on skb
allocation, and when copying just treat it as a part of the frame
and do a pull after to "move" it to the "reserved" zone.

net_prefetch() xdp->data_meta and align the copy size to speed-up
memcpy() a little and better match i40e_construct_skb().

Fixes: 0a714186d3 ("i40e: add AF_XDP zero-copy Rx support")
Suggested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31 09:42:58 -08:00
Alexander Lobakin
bc97f9c6f9 i40e: don't reserve excessive XDP_PACKET_HEADROOM on XSK Rx to skb
{__,}napi_alloc_skb() allocates and reserves additional NET_SKB_PAD
+ NET_IP_ALIGN for any skb.
OTOH, i40e_construct_skb_zc() currently allocates and reserves
additional `xdp->data - xdp->data_hard_start`, which is
XDP_PACKET_HEADROOM for XSK frames.
There's no need for that at all as the frame is post-XDP and will
go only to the networking stack core.
Pass the size of the actual data only to __napi_alloc_skb() and
don't reserve anything. This will give enough headroom for stack
processing.

Fixes: 0a714186d3 ("i40e: add AF_XDP zero-copy Rx support")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-31 09:37:47 -08:00
Colin Ian King
fe683faecc cw1200: wsm: make array queue_id_to_wmm_aci static const
Don't populate the read-only array queue_id_to_wmm_aci on the stack
but instead make it static. Also makes the object code a little smaller.

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220109230921.58766-1-colin.i.king@gmail.com
2022-01-31 17:49:17 +02:00
Changcheng Deng
708db26845 wilc1000: use min_t() to make code cleaner
Use min_t() in order to make code cleaner.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211222070815.483009-1-deng.changcheng@zte.com.cn
2022-01-31 17:48:18 +02:00
Ping-Ke Shih
e109e3617e rtw88: rtw8821c: enable rfe 6 devices
Ping-Ke Shih answered[1] a question for a user about an rtl8821ce device that
reported RFE 6, which the driver did not support. Ping-Ke suggested a possible
fix, but the user never reported back.

A second user discovered the above thread and tested the proposed fix.
Accordingly, I am pushing this change, even though I am not the author.

[1] https://lore.kernel.org/linux-wireless/3f5e2f6eac344316b5dd518ebfea2f95@realtek.com/

Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Reported-and-tested-by: masterzorag <masterzorag@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220107024739.20967-1-Larry.Finger@lwfinger.net
2022-01-31 17:47:41 +02:00