Commit graph

112,392 commits

Author SHA1 Message Date
Vincent Mailhol
f68eafeb97 can: do not copy the payload of RTR frames
The actual payload length of the CAN Remote Transmission Request (RTR)
frames is always 0, i.e. no payload is transmitted on the wire.
However, those RTR frames still use the DLC to indicate the length of
the requested frame.

For this reason, it is incorrect to copy the payload of RTR frames
(the payload buffer would only contain garbage data). This patch
encapsulates the payload copy in a check toward the RTR flag.

Link: https://lore.kernel.org/all/20211207121531.42941-4-mailhol.vincent@wanadoo.fr
Cc: Yasushi SHOJI <yashi@spacecubics.com>
Tested-by: Yasushi SHOJI <yashi@spacecubics.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05 12:09:05 +01:00
Vincent Mailhol
0b0ce2c677 can: kvaser_usb: do not increase tx statistics when sending error message frames
The CAN error message frames (i.e. error skb) are an interface
specific to socket CAN. The payload of the CAN error message frames
does not correspond to any actual data sent on the wire. Only an error
flag and a delimiter are transmitted when an error occurs (c.f. ISO
11898-1 section 10.4.4.2 "Error flag").

For this reason, it makes no sense to increment the tx_packets and
tx_bytes fields of struct net_device_stats when sending an error
message frame because no actual payload will be transmitted on the
wire.

N.B. Sending error message frames is a very specific feature which, at
the moment, is only supported by the Kvaser Hydra hardware. Please
refer to [1] for more details on the topic.

[1] https://lore.kernel.org/linux-can/CAMZ6RqK0rTNg3u3mBpZOoY51jLZ-et-J01tY6-+mWsM4meVw-A@mail.gmail.com/t/#u

Link: https://lore.kernel.org/all/20211207121531.42941-3-mailhol.vincent@wanadoo.fr
Co-developed-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05 12:09:05 +01:00
Vincent Mailhol
676068db69 can: do not increase rx statistics when generating a CAN rx error message frame
The CAN error message frames (i.e. error skb) are an interface
specific to socket CAN. The payload of the CAN error message frames
does not correspond to any actual data sent on the wire. Only an error
flag and a delimiter are transmitted when an error occurs (c.f. ISO
11898-1 section 10.4.4.2 "Error flag").

For this reason, it makes no sense to increment the rx_packets and
rx_bytes fields of struct net_device_stats because no actual payload
were transmitted on the wire.

This patch fixes all the CAN drivers.

Link: https://lore.kernel.org/all/20211207121531.42941-2-mailhol.vincent@wanadoo.fr
CC: Marc Kleine-Budde <mkl@pengutronix.de>
CC: Nicolas Ferre <nicolas.ferre@microchip.com>
CC: Alexandre Belloni <alexandre.belloni@bootlin.com>
CC: Ludovic Desroches <ludovic.desroches@microchip.com>
CC: Chandrasekar Ramakrishnan <rcsekar@samsung.com>
CC: Maxime Ripard <mripard@kernel.org>
CC: Chen-Yu Tsai <wens@csie.org>
CC: Jernej Skrabec <jernej.skrabec@gmail.com>
CC: Appana Durga Kedareswara rao <appana.durga.rao@xilinx.com>
CC: Naga Sureshkumar Relli <naga.sureshkumar.relli@xilinx.com>
CC: Michal Simek <michal.simek@xilinx.com>
CC: Stephane Grosjean <s.grosjean@peak-system.com>
Tested-by: Jimmy Assarsson <extja@kvaser.com> # kvaser
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Acked-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Tested-by: Stefan Mätje <stefan.maetje@esd.eu> # esd_usb2
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05 12:09:05 +01:00
Vincent Mailhol
e233640cd3 can: etas_es58x: es58x_init_netdev: populate net_device::dev_port
The field dev_port of struct net_device indicates the port number of a
network device [1]. This patch populates this field.

This field can be helpful to distinguish between the two network
interfaces of a dual channel device (i.e. ES581.4 or ES582.1). Indeed,
at the moment, all the network interfaces of a same device share the
same static udev attributes c.f. output of:

| udevadm info --attribute-walk /sys/class/net/canX

The dev_port attribute can then be used to write some udev rules to,
for example, assign a permanent name to each network interface based
on the serial/dev_port pair (which is convenient when you have a test
bench with several CAN devices connected simultaneously and wish to
keep consistent interface names upon reboot).

[1] https://www.kernel.org/doc/Documentation/ABI/testing/sysfs-class-net

Link: https://lore.kernel.org/all/20211026180553.1953189-1-mailhol.vincent@wanadoo.fr
Suggested-by: Lukas Magel <lukas.magel@escrypt.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05 12:09:00 +01:00
Lad Prabhakar
decdcaeedc can: sja1000: sp_probe(): use platform_get_irq() to get the interrupt
It is preferred that drivers use platform_get_irq() instead of
irq_of_parse_and_map(), so replace.

Link: https://lore.kernel.org/all/20211221200016.13459-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05 12:08:46 +01:00
Lad Prabhakar
eff104cf3c can: ti_hecc: ti_hecc_probe(): use platform_get_irq() to get the interrupt
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue when
using hierarchical interrupt domains using "interrupts" property in
the node as this bypasses the hierarchical setup and messes up the irq
chaining.

In preparation for removal of static setup of IRQ resource from DT
core code use platform_get_irq().

Link: https://lore.kernel.org/all/20211221194508.11737-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05 12:08:19 +01:00
Jimmy Assarsson
b8f9179968 can: kvaser_usb: make use of units.h in assignment of frequency
Use the MEGA define plus the comment /* Hz */ when assigning
frequencies.

Link: https://lore.kernel.org/all/20211210075803.343841-1-mkl@pengutronix.de
Signed-off-by: Jimmy Assarsson <extja@kvaser.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05 10:13:50 +01:00
Andy Shevchenko
68fa39ea91 can: mcp251x: mcp251x_gpio_setup(): Get rid of duplicate of_node assignment
GPIO library does copy the of_node from the parent device of the GPIO
chip, there is no need to repeat this in the individual drivers.
Remove assignment here.

For the details one may look into the of_gpio_dev_init()
implementation.

Link: https://lore.kernel.org/all/20211202205855.76946-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05 10:13:50 +01:00
Marc Kleine-Budde
617dbee5c7 can: usb_8dev: remove unused member echo_skb from struct usb_8dev_priv
This patch removes the unused memberecho_skb from the struct
usb_8dev_priv.

Fixes: 0024d8ad16 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/all/20220104230753.956520-1-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2022-01-05 10:13:50 +01:00
M Chetan Kumar
ffd32ea6b1 Revert "net: wwan: iosm: Keep device at D0 for s2idle case"
Depending on BIOS configuration IOSM driver exchanges
protocol required for putting device into D3L2 or D3L1.2.

ipc_pcie_suspend_s2idle() is implemented to put device to D3L1.2.

This patch forces PCI core know this device should stay at D0.
- pci_save_state()is expensive since it does a lot of slow PCI
config reads.

The reported issue is not observed on x86 platform. The supurios
wake on AMD platform needs to be futher debugged with orignal patch
submitter [1]. Also the impact of adding pci_save_state() needs to be
assessed by testing it on other platforms.

This reverts commit f4dd5174e273("net: wwan: iosm: Keep device
at D0 for s2idle case").

[1] https://lore.kernel.org/all/20211224081914.345292-2-kai.heng.feng@canonical.com/

Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Link: https://lore.kernel.org/r/20220104150213.1894-1-m.chetan.kumar@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-04 18:15:17 -08:00
Martin Habets
1d5a474240 sfc: The RX page_ring is optional
The RX page_ring is an optional feature that improves
performance. When allocation fails the driver can still
function, but possibly with a lower bandwidth.
Guard against dereferencing a NULL page_ring.

Fixes: 2768935a46 ("sfc: reuse pages to avoid DMA mapping/unmapping costs")
Signed-off-by: Martin Habets <habetsm.xilinx@gmail.com>
Reported-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/164111288276.5798.10330502993729113868.stgit@palantir17.mph.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-04 18:14:21 -08:00
Karen Sornek
b712941c80 iavf: Fix limit of total number of queues to active queues of VF
In the absence of this validation, if the user requests to
configure queues more than the enabled queues, it results in
sending the requested number of queues to the kernel stack
(due to the asynchronous nature of VF response), in which
case the stack might pick a queue to transmit that is not
enabled and result in Tx hang. Fix this bug by
limiting the total number of queues allocated for VF to
active queues of VF.

Fixes: d5b33d0244 ("i40evf: add ndo_setup_tc callback to i40evf")
Signed-off-by: Ashwin Vijayavel <ashwin.vijayavel@intel.com>
Signed-off-by: Karen Sornek <karen.sornek@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-04 14:12:52 -08:00
Jedrzej Jagielski
e738451d78 i40e: Fix incorrect netdev's real number of RX/TX queues
There was a wrong queues representation in sysfs during
driver's reinitialization in case of online cpus number is
less than combined queues. It was caused by stopped
NetworkManager, which is responsible for calling vsi_open
function during driver's initialization.
In specific situation (ex. 12 cpus online) there were 16 queues
in /sys/class/net/<iface>/queues. In case of modifying queues with
value higher, than number of online cpus, then it caused write
errors and other errors.
Add updating of sysfs's queues representation during driver
initialization.

Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Lukasz Cieplicki <lukaszx.cieplicki@intel.com>
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-04 14:12:18 -08:00
Mateusz Palczewski
40feded8a2 i40e: Fix for displaying message regarding NVM version
When loading the i40e driver, it prints a message like: 'The driver for the
device detected a newer version of the NVM image v1.x than expected v1.y.
Please install the most recent version of the network driver.' This is
misleading as the driver is working as expected.

Fix that by removing the second part of message and changing it from
dev_info to dev_dbg.

Fixes: 4fb29bddb5 ("i40e: The driver now prints the API version in error message")
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-04 14:10:48 -08:00
Di Zhu
3116f59c12 i40e: fix use-after-free in i40e_sync_filters_subtask()
Using ifconfig command to delete the ipv6 address will cause
the i40e network card driver to delete its internal mac_filter and
i40e_service_task kernel thread will concurrently access the mac_filter.
These two processes are not protected by lock
so causing the following use-after-free problems.

 print_address_description+0x70/0x360
 ? vprintk_func+0x5e/0xf0
 kasan_report+0x1b2/0x330
 i40e_sync_vsi_filters+0x4f0/0x1850 [i40e]
 i40e_sync_filters_subtask+0xe3/0x130 [i40e]
 i40e_service_task+0x195/0x24c0 [i40e]
 process_one_work+0x3f5/0x7d0
 worker_thread+0x61/0x6c0
 ? process_one_work+0x7d0/0x7d0
 kthread+0x1c3/0x1f0
 ? kthread_park+0xc0/0xc0
 ret_from_fork+0x35/0x40

Allocated by task 2279810:
 kasan_kmalloc+0xa0/0xd0
 kmem_cache_alloc_trace+0xf3/0x1e0
 i40e_add_filter+0x127/0x2b0 [i40e]
 i40e_add_mac_filter+0x156/0x190 [i40e]
 i40e_addr_sync+0x2d/0x40 [i40e]
 __hw_addr_sync_dev+0x154/0x210
 i40e_set_rx_mode+0x6d/0xf0 [i40e]
 __dev_set_rx_mode+0xfb/0x1f0
 __dev_mc_add+0x6c/0x90
 igmp6_group_added+0x214/0x230
 __ipv6_dev_mc_inc+0x338/0x4f0
 addrconf_join_solict.part.7+0xa2/0xd0
 addrconf_dad_work+0x500/0x980
 process_one_work+0x3f5/0x7d0
 worker_thread+0x61/0x6c0
 kthread+0x1c3/0x1f0
 ret_from_fork+0x35/0x40

Freed by task 2547073:
 __kasan_slab_free+0x130/0x180
 kfree+0x90/0x1b0
 __i40e_del_filter+0xa3/0xf0 [i40e]
 i40e_del_mac_filter+0xf3/0x130 [i40e]
 i40e_addr_unsync+0x85/0xa0 [i40e]
 __hw_addr_sync_dev+0x9d/0x210
 i40e_set_rx_mode+0x6d/0xf0 [i40e]
 __dev_set_rx_mode+0xfb/0x1f0
 __dev_mc_del+0x69/0x80
 igmp6_group_dropped+0x279/0x510
 __ipv6_dev_mc_dec+0x174/0x220
 addrconf_leave_solict.part.8+0xa2/0xd0
 __ipv6_ifa_notify+0x4cd/0x570
 ipv6_ifa_notify+0x58/0x80
 ipv6_del_addr+0x259/0x4a0
 inet6_addr_del+0x188/0x260
 addrconf_del_ifaddr+0xcc/0x130
 inet6_ioctl+0x152/0x190
 sock_do_ioctl+0xd8/0x2b0
 sock_ioctl+0x2e5/0x4c0
 do_vfs_ioctl+0x14e/0xa80
 ksys_ioctl+0x7c/0xa0
 __x64_sys_ioctl+0x42/0x50
 do_syscall_64+0x98/0x2c0
 entry_SYSCALL_64_after_hwframe+0x65/0xca

Fixes: 41c445ff0f ("i40e: main driver core")
Signed-off-by: Di Zhu <zhudi2@huawei.com>
Signed-off-by: Rui Zhang <zhangrui182@huawei.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-04 14:09:57 -08:00
Mateusz Palczewski
01cbf50877 i40e: Fix to not show opcode msg on unsuccessful VF MAC change
Hide i40e opcode information sent during response to VF in case when
untrusted VF tried to change MAC on the VF interface.

This is implemented by adding an additional parameter 'hide' to the
response sent to VF function that hides the display of error
information, but forwards the error code to VF.

Previously it was not possible to send response with some error code
to VF without displaying opcode information.

Fixes: 5c3c48ac6b ("i40e: implement virtual device interface")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Reviewed-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-01-04 13:59:54 -08:00
Pavel Skripkin
754e438235 ieee802154: atusb: fix uninit value in atusb_set_extended_addr
Alexander reported a use of uninitialized value in
atusb_set_extended_addr(), that is caused by reading 0 bytes via
usb_control_msg().

Fix it by validating if the number of bytes transferred is actually
correct, since usb_control_msg() may read less bytes, than was requested
by caller.

Fail log:

BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd
 ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline]
 atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline]
 atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056
 usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396

Fixes: 7490b008d1 ("ieee802154: add support for atusb transceiver")
Reported-by: Alexander Potapenko <glider@google.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/20220104182806.7188-1-paskripkin@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
2022-01-04 20:10:04 +01:00
Minghao Chi
416b27439d ethernet/sfc: remove redundant rc variable
Return value from efx_mcdi_rpc() directly instead
of taking this in another redundant variable.

Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: CGEL ZTE <cgel.zte@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04 12:41:41 +00:00
Jakub Kicinski
7d714ff14d net: fixup build after bpf header changes
Recent bpf-next merge brought in header changes which uncovered
includes missing in net-next which were not present in bpf-next.
Build problems happen only on less-popular arches like hppa,
sparc, alpha etc.

I could repro the build problem with ice but not the mlx5 problem
Abdul was reporting. mlx5 does look like it should include filter.h,
anyway.

Reported-by: Abdul Haleem <abdhalee@linux.vnet.ibm.com>
Fixes: e63a023489 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next")
Link: https://lore.kernel.org/all/7c03768d-d948-c935-a7ab-b1f963ac7eed@linux.vnet.ibm.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04 12:34:19 +00:00
Aleksander Jan Bajkowski
c3e6b2c35b net: lantiq_xrx200: add ingress SG DMA support
This patch adds support for scatter gather DMA. DMA in PMAC splits
the packet into several buffers when the MTU on the CPU port is
less than the MTU of the switch. The first buffer starts at an
offset of NET_IP_ALIGN. In subsequent buffers, dma ignores the
offset. Thanks to this patch, the user can still connect to the
device in such a situation. For normal configurations, the patch
has no effect on performance.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04 12:30:34 +00:00
Radu Pirea (NXP OSS)
7a71c8aa0a phy: nxp-c45-tja11xx: add extts and perout support
Add support for external timestamp and periodic signal output.
TJA1103 have one periodic signal and one external time stamp signal that
can be multiplexed on all 11 gpio pins.

The periodic signal can be only enabled or disabled. Have no start time
and if is enabled will be generated with a period of one second in sync
with the LTC seconds counter. The phase change is possible only with a
half of a second.

The external timestamp signal has no interrupt and no valid bit and
that's why the timestamps are handled by polling in .do_aux_work.

Signed-off-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04 12:14:19 +00:00
Paul Blakey
c9c079b4de net/mlx5: CT: Set flow source hint from provided tuple device
Get originating device from tuple offload metadata match ingress_ifindex,
and set flow_source hint to either LOCAL for vf/sf reps, UPLINK for
uplink/wire/tunnel devices/bond, or ANY (as before this patch)
for all others.

This allows lower layer (software steering or firmware) to insert the tuple
rule only in one table (either rx or tx) instead of two (rx and tx).

Signed-off-by: Paul Blakey <paulb@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-04 12:12:56 +00:00
Florian Fainelli
7590fc6f80 net: mdio: Demote probed message to debug print
On systems with large numbers of MDIO bus/muxes the message indicating
that a given MDIO bus has been successfully probed is repeated for as
many buses we have, which can eat up substantial boot time for no
reason, demote to a debug print.

Reported-by: Maxime Bizon <mbizon@freebox.fr>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220103194024.2620-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-03 19:05:39 -08:00
Florian Fainelli
065e1ae02f Revert "net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register"
This reverts commit b45396afa4 ("net: phy:
fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
since it prevents any system that uses a fixed PHY without a GPIO
descriptor from properly working:

[    5.971952] brcm-systemport 9300000.ethernet: failed to register fixed PHY
[    5.978854] brcm-systemport: probe of 9300000.ethernet failed with error -22
[    5.986047] brcm-systemport 9400000.ethernet: failed to register fixed PHY
[    5.992947] brcm-systemport: probe of 9400000.ethernet failed with error -22

Fixes: b45396afa4 ("net: phy: fixed_phy: Fix NULL vs IS_ERR() checking in __fixed_phy_register")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220103193453.1214961-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-03 18:59:16 -08:00
Christophe JAILLET
3d694552fd net: vxge: Use dma_set_mask_and_coherent() and simplify code
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().

Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.

That said, 'high_dma' can only be 1 after a successful
dma_set_mask_and_coherent().

Simplify code and remove some dead code accordingly, including a now
useless parameter to vxge_device_register().

[1]: https://lkml.org/lkml/2021/6/7/398

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-03 10:42:58 +00:00
Christophe JAILLET
7120075ec4 ethernet: s2io: Use dma_set_mask_and_coherent() and simplify code
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().

Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.

That said, 'dma_flag' can only be 'true' after a successful
dma_set_mask_and_coherent().

Simplify code and remove some dead code accordingly, including the now
useless 'high_dma_flag' field in 'struct s2io_nic'.

[1]: https://lkml.org/lkml/2021/6/7/398

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-03 10:42:58 +00:00
Saeed Mahameed
6bf950a8ff net: vertexcom: default to disabled on kbuild
Sorry for being rude but new vendors/drivers are supposed to be disabled
by default, otherwise we will have to manually keep track of all vendors
we are not interested in building.

Fixes: 2f207cbf0d ("net: vertexcom: Add MSE102x SPI support")
CC: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-03 10:41:32 +00:00
Colin Foster
0699b3e06f net: pcs: lynx: use a common naming scheme for all lynx_pcs variables
pcs-lynx.c used lynx_pcs and lynx as a variable name within the same file.
This standardizes all internal variables to just "lynx"

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 18:48:47 +00:00
Colin Foster
82cc453753 net: ethernet: enetc: name change for clarity from pcs to mdio_device
A simple variable update from "pcs" to "mdio_device" for the mdio device
will make things a little cleaner.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 18:48:47 +00:00
Colin Foster
2c1415e67f net: dsa: seville: name change for clarity from pcs to mdio_device
A simple variable update from "pcs" to "mdio_device" for the mdio device
will make things a little cleaner.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 18:48:47 +00:00
Colin Foster
61f0d0c304 net: dsa: felix: name change for clarity from pcs to mdio_device
Simple rename of a variable to make things more logical.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 18:48:47 +00:00
Colin Foster
e7026f1556 net: phy: lynx: refactor Lynx PCS module to use generic phylink_pcs
Remove references to lynx_pcs structures so drivers like the Felix DSA
can reference alternate PCS drivers.

Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 18:48:47 +00:00
Markus Koch
1ef5e1d0dc net/fsl: Remove leftover definition in xgmac_mdio
commit 26eee0210a ("net/fsl: fix a bug in xgmac_mdio") fixed a bug in
the QorIQ mdio driver but left the (now unused) incorrect bit definition
for MDIO_DATA_BSY in the code. This commit removes it.

Signed-off-by: Markus Koch <markus@notsyncing.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 18:43:42 +00:00
Christophe JAILLET
60c332029c enic: Remove usage of the deprecated "pci-dma-compat.h" API
In [1], Christoph Hellwig has proposed to remove the wrappers in
include/linux/pci-dma-compat.h.

Some reasons why this API should be removed have been given by Julia
Lawall in [2].

A coccinelle script has been used to perform the needed transformation
Only relevant parts are given below.

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

[1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/
[2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 16:14:30 +00:00
Christophe JAILLET
4f9f531e15 qed: Use dma_set_mask_and_coherent() and simplify code
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().

Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.

Simplify code and remove some dead code accordingly.

Now that qed_set_coherency_mask() is mostly a single call to
dma_set_mask_and_coherent(), fold it in its only caller.

[1]: https://lkml.org/lkml/2021/6/7/398

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 16:14:30 +00:00
Christophe JAILLET
1aae5cc0a5 chelsio: cxgb: Use dma_set_mask_and_coherent() and simplify code
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().

Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.

That said, 'pci_using_dac' can only be 1 after a successful
dma_set_mask_and_coherent().

Simplify code and remove some dead code accordingly.

[1]: https://lkml.org/lkml/2021/6/7/398

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 16:14:30 +00:00
Christophe JAILLET
584c61cedb sun/cassini: Use dma_set_mask_and_coherent() and simplify code
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().

Moreover, as stated in [1], dma_set_mask() with a 64-bit mask will never
fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.

That said, 'pci_using_dac' can only be 1 after a successful
dma_set_mask_and_coherent().

Simplify code and remove some dead code accordingly.

[1]: https://lkml.org/lkml/2021/6/7/398

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 16:14:30 +00:00
Thomas Toye
29262e1f77 rndis_host: support Hytera digital radios
Hytera makes a range of digital (DMR) radios. These radios can be
programmed to a allow a computer to control them over Ethernet over USB,
either using NCM or RNDIS.

This commit adds support for RNDIS for Hytera radios. I tested with a
Hytera PD785 and a Hytera MD785G. When these radios are programmed to
set up a Radio to PC Network using RNDIS, an USB interface will be added
with class 2 (Communications), subclass 2 (Abstract Modem Control) and
an interface protocol of 255 ("vendor specific" - lsusb even hints "MSFT
RNDIS?").

This patch is similar to the solution of this StackOverflow user, but
that only works for the Hytera MD785:
https://stackoverflow.com/a/53550858

To use the "Radio to PC Network" functionality of Hytera DMR radios, the
radios need to be programmed correctly in CPS (Hytera's Customer
Programming Software). "Forward to PC" should be checked in "Network"
(under "General Setting" in "Conventional") and the "USB Network
Communication Protocol" should be set to RNDIS.

Signed-off-by: Thomas Toye <thomas@toye.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 16:12:45 +00:00
Arthur Kiyanovski
5055dc0348 net: ena: Fix error handling when calculating max IO queues number
The role of ena_calc_max_io_queue_num() is to return the number
of queues supported by the device, which means the return value
should be >=0.

The function that calls ena_calc_max_io_queue_num(), checks
the return value. If it is 0, it means the device reported
it supports 0 IO queues. This case is considered an error
and is handled by the calling function accordingly.

However the current implementation of ena_calc_max_io_queue_num()
is wrong, since when it detects the device supports 0 IO queues,
it returns -EFAULT.

In such a case the calling function doesn't detect the error,
and therefore doesn't handle it.

This commit changes ena_calc_max_io_queue_num() to return 0
in case the device reported it supports 0 queues, allowing the
calling function to properly handle the error case.

Fixes: 736ce3f414 ("net: ena: make ethtool -l show correct max number of queues")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 12:45:13 +00:00
Arthur Kiyanovski
cb3d4f98f0 net: ena: Fix wrong rx request id by resetting device
A wrong request id received from the device is a sign that
something is wrong with it, therefore trigger a device reset.

Also add some debug info to the "Page is NULL" print to make
it easier to debug.

Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 12:45:13 +00:00
Arthur Kiyanovski
c255a34e02 net: ena: Fix undefined state when tx request id is out of bounds
ena_com_tx_comp_req_id_get() checks the req_id of a received completion,
and if it is out of bounds returns -EINVAL. This is a sign that
something is wrong with the device and it needs to be reset.

The current code does not reset the device in this case, which leaves
the driver in an undefined state, where this completion is not properly
handled.

This commit adds a call to handle_invalid_req_id() in ena_clean_tx_irq()
and ena_clean_xdp_irq() which resets the device to fix the issue.

This commit also removes unnecessary request id checks from
validate_tx_req_id() and validate_xdp_req_id(). This check is unneeded
because it was already performed in ena_com_tx_comp_req_id_get(), which
is called right before these functions.

Fixes: 548c4940b9 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 12:45:13 +00:00
Christophe JAILLET
c95e078069 tehuti: Use dma_set_mask_and_coherent() and simplify code
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().

Moreover, as stated in [1], dma_set_mask_and_coherent() with a 64-bit mask
will never fail if dev->dma_mask is non-NULL.
So, if it fails, the 32 bits case will also fail for the same reason.

That said, 'pci_using_dac' can only be 1 after a successful
dma_set_mask_and_coherent().

Simplify code and remove some dead code accordingly.

[1]: https://lkml.org/lkml/2021/6/7/398
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 12:21:16 +00:00
Christophe JAILLET
c5180ad0c2 enic: Use dma_set_mask_and_coherent()
Use dma_set_mask_and_coherent() instead of unrolling it with some
dma_set_mask()+dma_set_coherent_mask().

This simplifies code and removes some dead code (dma_set_coherent_mask()
can not fail after a successful dma_set_mask())

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-02 12:20:12 +00:00
David S. Miller
e63a023489 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Alexei Starovoitov says:

====================
pull-request: bpf-next 2021-12-30

The following pull-request contains BPF updates for your *net-next* tree.

We've added 72 non-merge commits during the last 20 day(s) which contain
a total of 223 files changed, 3510 insertions(+), 1591 deletions(-).

The main changes are:

1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii.

2) Beautify and de-verbose verifier logs, from Christy.

3) Composable verifier types, from Hao.

4) bpf_strncmp helper, from Hou.

5) bpf.h header dependency cleanup, from Jakub.

6) get_func_[arg|ret|arg_cnt] helpers, from Jiri.

7) Sleepable local storage, from KP.

8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31 14:35:40 +00:00
David S. Miller
ce2b6eb409 mlx5-updates-2021-12-28
mlx5 Software steering, New features and optimizations
 
 This patch series brings various SW steering features, optimizations and
 debug-ability focused improvements.
 
  1) Expose debugfs for dumping the SW steering resources
  2) Removing unused fields
  3) support for matching on new fields
  4) steering optimization for RX/TX-only rules
  5) Make Software steering the default steering mechanism when
     available, applies only to Switchdev mode FDB
 
 From Yevgeny Kliteynik and Muhammad Sammar:
 
  - Patch 1 fixes an error flow in creating matchers
  - Patch 2 fix lower case macro prefix "mlx5_" to "MLX5_"
  - Patch 3 removes unused struct member in mlx5dr_matcher
  - Patch 4 renames list field in matcher struct to list_node to reflect the
    fact that is field is for list node that is stored on another struct's lists
  - Patch 5 adds checking for valid Flex parser ID value
  - Patch 6 adds the missing reserved fields to dr_match_param and aligns it to
    the format that is defined by HW spec
  - Patch 7 adds support for dumping SW steering (SMFS) resources using debugfs
    in CSV format: domain and its tables, matchers and rules
  - Patch 8 adds support for a new destination type - UPLINK
  - Patch 9 adds WARN_ON_ONCE on refcount checks in SW steering object destructors
  - Patches 10, 11, 12 add misc5 flow table match parameters and add support for
    matching on tunnel headers 0 and 1
  - Patch 13 adds support for matching on geneve_tlv_option_0_exist field
  - Patch 14 implements performance optimization for for empty or RX/TX-only
    matchers by splitting RX and TX matchers handling: matcher connection in the
    matchers chain is split into two separate lists (RX only and TX only), which
    solves a usecase of many RX or TX only rules that create a long chain of
    RX/TX-only paths w/o the actual rules
  - Patch 15 ignores modify TTL if device doesn't support it instead of
    adding and unsupported action
  - Patch 16 sets SMFS as a default steering mode
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmHOvKsACgkQSD+KveBX
 +j4CpQf8Cc3NkWhGVYYhRBlntdpyVTDpoVhw6RDXVwboIRZ3GcMm81SxgwKrDuUx
 Yhup4K1CNKt44D1RRhX4ElSemfo/afxfGIcq7S87vciUOaebWTIZgRyNvuYr/buI
 v9LIM7zTb1aXL7m3KQHOGc7cucVRvsNjteTxvp/DR0bPFEuzAr5tw9Y5qop9pBbM
 cfgdmXKUoRxA039mqZ2Fl7y+z51zRkfsCza7lEHcGgpvwOLubFEaghj7YTIT6h1m
 +We8w3/+B0mqS0HpByIxmyf/EQBG5Hl7FTbFj1Somn7EFEP4E+LaFzg8nGsUHEeI
 f5027uM7XGlThAUrgdaOMcwBfIuOww==
 =BE8m
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-updates-2021-12-28' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5 Software steering, New features and optimizations

This patch series brings various SW steering features, optimizations and
debug-ability focused improvements.

 1) Expose debugfs for dumping the SW steering resources
 2) Removing unused fields
 3) support for matching on new fields
 4) steering optimization for RX/TX-only rules
 5) Make Software steering the default steering mechanism when
    available, applies only to Switchdev mode FDB

From Yevgeny Kliteynik and Muhammad Sammar:

 - Patch 1 fixes an error flow in creating matchers
 - Patch 2 fix lower case macro prefix "mlx5_" to "MLX5_"
 - Patch 3 removes unused struct member in mlx5dr_matcher
 - Patch 4 renames list field in matcher struct to list_node to reflect the
   fact that is field is for list node that is stored on another struct's lists
 - Patch 5 adds checking for valid Flex parser ID value
 - Patch 6 adds the missing reserved fields to dr_match_param and aligns it to
   the format that is defined by HW spec
 - Patch 7 adds support for dumping SW steering (SMFS) resources using debugfs
   in CSV format: domain and its tables, matchers and rules
 - Patch 8 adds support for a new destination type - UPLINK
 - Patch 9 adds WARN_ON_ONCE on refcount checks in SW steering object destructors
 - Patches 10, 11, 12 add misc5 flow table match parameters and add support for
   matching on tunnel headers 0 and 1
 - Patch 13 adds support for matching on geneve_tlv_option_0_exist field
 - Patch 14 implements performance optimization for for empty or RX/TX-only
   matchers by splitting RX and TX matchers handling: matcher connection in the
   matchers chain is split into two separate lists (RX only and TX only), which
   solves a usecase of many RX or TX only rules that create a long chain of
   RX/TX-only paths w/o the actual rules
 - Patch 15 ignores modify TTL if device doesn't support it instead of
   adding and unsupported action
 - Patch 16 sets SMFS as a default steering mode
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31 14:29:31 +00:00
Jie Wang
aab8d1c6a5 net: hns3: delete the hclge_cmd.c and hclgevf_cmd.c
currently most cmdq APIs are unified in hclge_comm_cmd.c. Newly developed
cmdq APIs should also be placed in hclge_comm_cmd.c. So there is no need to
keep hclge_cmd.c and hclgevf_cmd.c.

This patch moves the hclge(vf)_cmd_send to hclge(vf)_main.c and deletes
the source files and makefile scripts.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31 14:25:47 +00:00
Jie Wang
cb413bfa6e net: hns3: refactor VF cmdq init and uninit APIs with new common APIs
This patch uses common cmdq init and uninit APIs to replace the old APIs in
VF cmdq module init and uninit module. Then the old VF init and uninit
APIs is deleted.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31 14:25:47 +00:00
Jie Wang
8e2288cad6 net: hns3: refactor PF cmdq init and uninit APIs with new common APIs
This patch uses common cmdq init and uninit APIs to replace the old APIs in
PF cmdq module init and uninit modules. Then the old PF init and uninit
APIs is deleted.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31 14:25:47 +00:00
Jie Wang
0b04224c13 net: hns3: create common cmdq init and uninit APIs
The PF and VF cmdq init and uninit APIs are also almost same espect the
suffixes of API names.

This patch creates common cmdq init and uninit APIs needed by PF and VF
cmdq modules. The next patch will use the new unified APIs to replace init
and uninit APIs in PF module.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31 14:25:47 +00:00
Jie Wang
745f0a19ee net: hns3: refactor VF cmdq resource APIs with new common APIs
This patch uses common cmdq resource allocate/free/query APIs to replace
the old APIs in VF cmdq module and deletes the old cmdq resource APIs.
Still we kept hclgevf_cmd_setup_basic_desc name as a seam API to avoid too
many meaningless replacement.

Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31 14:25:47 +00:00