Commit graph

707,509 commits

Author SHA1 Message Date
Badhri Jagan Sridharan
f3b73364a1 staging: typec: tcpm: add cc change handling in src states
In the case that the lower layer driver reports a cc change directly
from SINK state to SOURCE state, TCPM doesn't handle these cc change
in SRC_SEND_CAPABILITIES, SRC_READY states. And with SRC_ATTACHED
state, the change is not handled as the port is still considered
connected.

[49606.131672] state change DRP_TOGGLING -> SRC_ATTACH_WAIT
[49606.131701] pending state change SRC_ATTACH_WAIT -> SRC_ATTACHED @
200 ms
[49606.329952] state change SRC_ATTACH_WAIT -> SRC_ATTACHED [delayed 200
ms]
[49606.329978] polarity 0
[49606.329989] Requesting mux mode 1, config 0, polarity 0
[49606.349416] vbus:=1 charge=0
[49606.372274] pending state change SRC_ATTACHED -> SRC_UNATTACHED @ 480
ms
[49606.372431] VBUS on
[49606.372488] state change SRC_ATTACHED -> SRC_STARTUP
...
(the lower layer driver reports a direct change from source to sink)
[49606.536927] pending state change SRC_SEND_CAPABILITIES ->
SRC_SEND_CAPABILITIES @ 150 ms
[49606.547244] CC1: 2 -> 5, CC2: 0 -> 0 [state SRC_SEND_CAPABILITIES,
polarity 0, connected]

This can happen when the lower layer driver and/or the hardware
handles a portion of the Type-C state machine work, and quietly goes
through the unattached state.

Originally-from: Yueyao Zhu <yueyao@google.com>
Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-29 08:21:10 +02:00
Badhri Jagan Sridharan
13cb492cd0 staging: typec: tcpm: Consider port_type while determining unattached_state
While performing PORT_RESET, upon receiving the cc disconnect
signal from the underlaying tcpc device, TCPM transitions into
unattached state. Consider the current type of port while determining
the unattached state.

In the below logs, although the port_type was set to sink, TCPM
transitioned into SRC_UNATTACHED.

[  762.290654] state change SRC_READY -> PORT_RESET
[  762.324531] Setting voltage/current limit 0 mV 0 mA
[  762.327912] polarity 0
[  762.334864] cc:=0
[  762.347193] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms
[  762.347200] VBUS off
[  762.347203] CC1: 2 -> 0, CC2: 0 -> 0 [state PORT_RESET, polarity 0, disconnected]
[  762.347206] state change PORT_RESET -> SRC_UNATTACHED

Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-29 08:21:10 +02:00
Badhri Jagan Sridharan
af450ebb50 staging: typec: tcpm: Comply with TryWait.SNK State
According to the spec:
"4.5.2.2.10.2 Exiting from TryWait.SNK State
The port shall transition to Attached.SNK after tCCDebounce if or when VBUS
is detected. Note the Source may initiate USB PD communications which will
cause brief periods of the SNK.Open state on both the CC1 and CC2 pins,
but this event will not exceed tPDDebounce. The port shall transition to
Unattached.SNK when the state of both of the CC1 and CC2 pins is SNK.Open
for at least tPDDebounce."

Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-29 08:21:10 +02:00
Badhri Jagan Sridharan
131c7d12ef staging: typec: tcpm: Follow Try.SRC exit requirements
According to spec:
" 4.5.2.2.9.2 Exiting from Try.SRC State:
The port shall transition to Attached.SRC when the SRC.Rd
state is detected on exactly one of the CC1 or CC2 pins for
at least tPDDebounce. The port shall transition to
TryWait.SNK after tDRPTry and the SRC.Rd state has not been
detected."

Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-29 08:21:10 +02:00
Badhri Jagan Sridharan
a0a3e04e6b staging: typec: tcpm: Check for Rp for tPDDebounce
According the spec, the following is the conditions for exiting Try.SNK
state:
"The port shall wait for tDRPTry and only then begin monitoring the CC1 and
CC2 pins for the SNK.Rp state. The port shall then transition to
Attached.SNK when the SNK.Rp state is detected on exactly one of the CC1
or CC2 pins for at least tPDDebounce and V BUS is detected. Alternatively,
the port shall transition to TryWait.SRC if SNK.Rp state is not detected
for tPDDebounce."

Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-29 08:21:10 +02:00
Badhri Jagan Sridharan
02d5be466b staging: typec: tcpm: Prevent TCPM from looping in SRC_TRYWAIT
According to the spec the following is the condition
for exiting TryWait.SRC:

"The port shall transition to Attached.SRC when V BUS is at vSafe0V
and the SRC.Rd state is detected on exactly one of the CC pins for at
least tCCDebounce. The port shall transition to Unattached.SNK after
tDRPTry if neither of the CC1 or CC2 pins are in the SRC.Rd state"

TCPM at present keeps re-entering the SRC_TRYWAIT and keeps restarting
tDRPTry if the CC presents Rp and disconnects within tCCDebounce.

For example:
[  447.164308] pending state change SRC_TRYWAIT -> SRC_ATTACHED @ 200 ms
[  447.164386] CC1: 2 -> 0, CC2: 0 -> 0 [state SRC_TRYWAIT, polarity 0, disconnected]
[  447.164406] state change SRC_TRYWAIT -> SRC_TRYWAIT
[  447.164573] cc:=3
[  447.191408] pending state change SRC_TRYWAIT -> SRC_TRYWAIT_UNATTACHED @ 100 ms
[  447.191478] CC1: 0 -> 0, CC2: 0 -> 0 [state SRC_TRYWAIT, polarity 0, disconnected]
[  447.207261] CC1: 0 -> 2, CC2: 0 -> 0 [state SRC_TRYWAIT, polarity 0, connected]
[  447.207306] state change SRC_TRYWAIT -> SRC_TRYWAIT
[  447.207485] cc:=3
[  447.237283] pending state change SRC_TRYWAIT -> SRC_ATTACHED @ 200 ms
[  447.237357] CC1: 2 -> 0, CC2: 0 -> 0 [state SRC_TRYWAIT, polarity 0, disconnected]
[  447.237379] state change SRC_TRYWAIT -> SRC_TRYWAIT
[  447.237532] cc:=3
[  447.263219] pending state change SRC_TRYWAIT -> SRC_TRYWAIT_UNATTACHED @ 100 ms
[  447.263289] CC1: 0 -> 0, CC2: 0 -> 0 [state SRC_TRYWAIT, polarity 0, disconnected]
[  447.280926] CC1: 0 -> 2, CC2: 0 -> 0 [state SRC_TRYWAIT, polarity 0, connected]
[  447.280970] state change SRC_TRYWAIT -> SRC_TRYWAIT
[  447.281158] cc:=3
[  447.307767] pending state change SRC_TRYWAIT -> SRC_ATTACHED @ 200 ms
[  447.307838] CC1: 2 -> 0, CC2: 0 -> 0 [state SRC_TRYWAIT, polarity 0, disconnected]
[  447.307858] state change SRC_TRYWAIT -> SRC_TRYWAIT

In TCPM, tDRPTry is set tp 100ms (min 75ms and max 150ms)
and tCCdebounce is set to 200ms (min 100ms and max 200ms).
To overcome the issue, record the time at which the port
enters TryWait.SRC(SRC_TRYWAIT) and re-enter SRC_TRYWAIT
only when CC keeps debouncing within tDRPTry.

Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-29 08:21:10 +02:00
Badhri Jagan Sridharan
ff6c8cb172 staging: typec: tcpm: Check for port type for Try.SRC/Try.SNK
Enable Try.SRC or Try.SNK only when port_type is
DRP. Try.SRC or Try.SNK state machines are not
valid for SRC only or SNK only ports.

Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-29 08:21:10 +02:00
Badhri Jagan Sridharan
9b0ae69909 staging: typec: tcpm: set port type callback
The port type callback call enquires the tcpc_dev if
the requested port type is supported. If supported, then
performs a tcpm reset if required after setting the tcpm
internal port_type variable.

Check against the tcpm port_type instead of checking
against caps.type as port_type reflects the current
configuration.

Signed-off-by: Badhri Jagan Sridharan <Badhri@google.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-29 08:21:10 +02:00
Nicholas Piggin
94a04bc25a KVM: PPC: Book3S HV: POWER9 does not require secondary thread management
POWER9 CPUs have independent MMU contexts per thread, so KVM does not
need to quiesce secondary threads, so the hwthread_req/hwthread_state
protocol does not have to be used. So patch it away on POWER9, and patch
away the branch from the Linux idle wakeup to kvm_start_guest that is
never used.

Add a warning and error out of kvmppc_grab_hwthread in case it is ever
called on POWER9.

This avoids a hwsync in the idle wakeup path on POWER9.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Use WARN(...) instead of WARN_ON()/pr_err(...)]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-08-29 14:48:59 +10:00
Vitaly Kuznetsov
c8488a8ad7 hinic: don't build the module by default
We probably don't want to enable code supporting particular hardware by
default e.g. when someone does 'make defconfig'. Other ethernet modules
don't do it.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 21:39:52 -07:00
Florian Fainelli
c7848399ec net: dsa: Don't dereference dst->cpu_dp->netdev
If we do not have a master network device attached dst->cpu_dp will be
NULL and accessing cpu_dp->netdev will create a trace similar to the one
below. The correct check is on dst->cpu_dp period.

[    1.004650] DSA: switch 0 0 parsed
[    1.008078] Unable to handle kernel NULL pointer dereference at
virtual address 00000010
[    1.016195] pgd = c0003000
[    1.018918] [00000010] *pgd=80000000004003, *pmd=00000000
[    1.024349] Internal error: Oops: 206 [#1] SMP ARM
[    1.029157] Modules linked in:
[    1.032228] CPU: 0 PID: 1 Comm: swapper/0 Not tainted
4.13.0-rc6-00071-g45b45afab9bd-dirty #7
[    1.040772] Hardware name: Broadcom STB (Flattened Device Tree)
[    1.046704] task: ee08f840 task.stack: ee090000
[    1.051258] PC is at dsa_register_switch+0x5e0/0x9dc
[    1.056234] LR is at dsa_register_switch+0x5d0/0x9dc
[    1.061211] pc : [<c08fb28c>]    lr : [<c08fb27c>]    psr: 60000213
[    1.067491] sp : ee091d88  ip : 00000000  fp : 0000000c
[    1.072728] r10: 00000000  r9 : 00000001  r8 : ee208010
[    1.077965] r7 : ee2b57b0  r6 : ee2b5780  r5 : 00000000  r4 :
ee208e0c
[    1.084506] r3 : 00000000  r2 : 00040d00  r1 : 2d1b2000  r0 :
00000016
[    1.091050] Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM
Segment user
[    1.098199] Control: 32c5387d  Table: 00003000  DAC: fffffffd
[    1.103957] Process swapper/0 (pid: 1, stack limit = 0xee090210)

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 6d3c8c0dd8 ("net: dsa: Remove master_netdev and use dst->cpu_dp->netdev")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 21:19:43 -07:00
Matt Weber
a4e89ffb59 powerpc/e6500: Update machine check for L1D cache err
This patch updates the machine check handler of Linux kernel to
handle the e6500 architecture case. In e6500 core, L1 Data Cache Write
Shadow Mode (DCWS) register is not implemented but L1 data cache always
runs in write shadow mode. So, on L1 data cache parity errors, hardware
will automatically invalidate the data cache but will still log a
machine check interrupt.

Signed-off-by: Ronak Desai <ronak.desai@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Scott Wood <oss@buserror.net>
2017-08-28 23:15:32 -05:00
Stefan Roese
6084fc2ec4 dmaengine: altera: Use macros instead of structs to describe the registers
This patch moves from a struct declaration for the DMA controller
registers to macros with offests to the base address. This is mainly
done to remove the sparse warnings, since the function parameter of
ioread32/iowrite32 is "void __iomem *" instead of a pointer to struct
members. With this patch applied, no sparse warning is seen anymore.

Please note that the struct for the descriptors is still kept in place,
as the code largely accesses the struct members as internal variables
before the complete struct is copied into the descriptor FIFO of the
DMA controller.

Additionally this patch also removes two warnings "variable xxx set but
not used" seen when compiling with "W=1". The registers need to be read
to flush the response FIFO, but nothing needs to be done with them. So
the code is correct here and the warning is a false one.

Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-08-29 08:17:43 +05:30
Hannes Reinecke
fbf252335f scsi: qlogicpti: fixup qlogicpti_reset() definition
A merge error crept in when formatting commit af167bc ("scsi: qlogicpti:
move bus reset to host reset")

Fixes: af167bc ("scsi: qlogicpti: move bus reset to host reset")
Signed-off-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-28 22:15:46 -04:00
Dan Carpenter
fa2d9d6e89 scsi: qedi: off by one in qedi_get_cmd_from_tid()
The > here should be >= or we end up reading one element beyond the end
of the qedi->itt_map[] array.  The qedi->itt_map[] array is allocated in
qedi_alloc_itt().

Fixes: ace7f46ba5 ("scsi: qedi: Add QLogic FastLinQ offload iSCSI driver framework.")
Cc: <stable@vger.kernel.org> # v4.10+
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Manish Rangankar <Manish.Rangankar@cavium.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-08-28 22:12:39 -04:00
Dave Airlie
7846b12fe0 Merge branch 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux into drm-next
vmwgfx add fence fd support.

* 'drm-vmwgfx-next' of git://people.freedesktop.org/~syeh/repos_linux:
  drm/vmwgfx: Bump the version for fence FD support
  drm/vmwgfx: Add export fence to file descriptor support
  drm/vmwgfx: Add support for imported Fence File Descriptor
  drm/vmwgfx: Prepare to support fence fd
  drm/vmwgfx: Fix incorrect command header offset at restart
  drm/vmwgfx: Support the NOP_ERROR command
  drm/vmwgfx: Restart command buffers after errors
  drm/vmwgfx: Move irq bottom half processing to threads
  drm/vmwgfx: Don't use drm_irq_[un]install
2017-08-29 10:38:14 +10:00
Dave Airlie
7ebdb0dd52 ummary:
- Provide NV12MT pixel format support of Mixer driver in generic way.
 - Refactor Exynos KMS drivers
   . Refactoring to panel detection way
   . Refactoring to setting up possible_crtcs
   . Refactoring to video and command mode support
 - Some cleanups
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJZn77sAAoJEFc4NIkMQxK4TaAP/1jb9CO2+gMnTTNdjJU+tCEx
 D/bztIDG0bxltpGjm7cDTe0S71GEfdoQ2rN75SCWTAkofVfe9bUUCecpCusWTchF
 lgkF3eTEVCSWw+7qko7sDvxmdC+8p0yZ4LHziozaB2Kd2yvIYLlkfiJeAHF30MpG
 tA2AErKJVOQxOS+z2/BHI7q4T9q5cdON5CW4j2OYQjzuOP2F/62RQlde48BG/WgA
 m9qK4zg4wVGkzadKTtBrK134girceAlC27gLabrLpsz6sv/EwYMtGFkAs4C4P/N5
 fDJKNjaiSphMwLJI9m4y9Q8mSvJWydDvr8JqO0Y3u2MPF6k2e7xOGTEsnqkBGTip
 vNoX1j6qHSC7DnXUCrvSqVJ+GDZZQWGnX1ggOtatNc38+oVnd8k3WIEJkFrKA5ap
 M5/0l2n01AnBbT1U+/N0a3dkHUd3Ecg+s+cSaOIe7aEMuUrM1hTAkQFHEUcPV54S
 5bqj9HquQcXeZdtbhB4X9b7/i+Aexj6YPm/Tv9aTn7cz4MJrB2N5hhdp5tt2Mqpj
 8+kZwGNi54AXB5Q+L6RFlefelWVxjGtmsoEp4M+wxZqP31+CeektoaxO0Cgfn0iJ
 JJOfpPIhHEUGE8pHH6TZWd8yFhB8oH2OAg7uZwHWgneJHZs3lQFmebwOfKl5p9cz
 tPyND6oasX8KouRIM/T5
 =JZ8z
 -----END PGP SIGNATURE-----

Merge tag 'exynos-drm-next-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next

Summary:
- Provide NV12MT pixel format support of Mixer driver in generic way.
- Refactor Exynos KMS drivers
  . Refactoring to panel detection way
  . Refactoring to setting up possible_crtcs
  . Refactoring to video and command mode support
- Some cleanups

* tag 'exynos-drm-next-for-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos:
  drm/exynos: simplify set_pixfmt() in DECON and FIMD drivers
  drm/exynos: consistent use of cpp
  drm/exynos: mixer: remove src offset from mixer_graph_buffer()
  drm/exynos: mixer: simplify mixer_graph_buffer()
  drm/exynos: mixer: simplify vp_video_buffer()
  drm/exynos: mixer: enable NV12MT support for the video plane
  drm/exynos: mixer: fix chroma comment in vp_video_buffer()
  arm64: dts: exynos: remove i80-if-timings nodes
  dt-bindings: exynos5433-decon: remove i80-if-timings property
  drm/exynos/decon5433: use mode info stored in CRTC to detect i80 mode
  drm/exynos: add mode_valid callback to exynos_drm
  drm/exynos/decon5433: refactor irq requesting code
  drm/exynos/mic: use mode info stored in CRTC to detect i80 mode
  drm/exynos/dsi: propagate info about command mode from panel
  drm/exynos/dsi: refactor panel detection logic
  drm/exynos: use helper to set possible crtcs
  drm/exynos/decon5433: use readl_poll_timeout helpers
2017-08-29 10:37:36 +10:00
Dave Airlie
095e2d04f9 Merge tag 'drm-misc-next-fixes-2017-08-28' of git://anongit.freedesktop.org/git/drm-misc into drm-next
UAPI Changes:
- Rename u32 to __u32 in struct drm_format_modifier_blob (Lionel)

Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

* tag 'drm-misc-next-fixes-2017-08-28' of git://anongit.freedesktop.org/git/drm-misc:
  drm: rename u32 in __u32 in uapi
2017-08-29 10:36:06 +10:00
Jason Ekstrand
ffa9443fb3 drm/syncobj: Add a signal ioctl (v3)
This IOCTL provides a mechanism for userspace to trigger a sync object
directly.  There are other ways that userspace can trigger a syncobj
such as submitting a dummy batch somewhere or hanging on to a triggered
sync_file and doing an import.  This just provides an easy way to
manually trigger the sync object without weird hacks.

The motivation for this IOCTL is Vulkan fences.  Vulkan lets you create
a fence already in the signaled state so that you can wait on it
immediatly without stalling.  We could also handle this with a new
create flag to ask the driver to create a syncobj that is already
signaled but the IOCTL seemed a bit cleaner and more generic.

v2:
 - Take an array of sync objects (Dave Airlie)
v3:
 - Throw -EINVAL if pad != 0

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-29 10:16:25 +10:00
Jason Ekstrand
aa4035d2c7 drm/syncobj: Add a reset ioctl (v3)
This just resets the dma_fence to NULL so it looks like it's never been
signaled.  This will be useful once we add the new wait API for allowing
wait on "submit and signal" behavior.

v2:
 - Take an array of sync objects (Dave Airlie)
v3:
 - Throw -EINVAL if pad != 0

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Christian König <christian.koenig@amd.com> (v1)
Signed-off-by: Dave Airlie <airlied@redhat.com>
2017-08-29 10:16:19 +10:00
David S. Miller
acae4b4885 Merge branch 'bnxt_en-next'
Michael Chan says:

====================
bnxt_en: Updates.

Various changes including updated firmware interface, improved TX ring
allocation scheme, improved out-of-memory logic in NAPI loop, reduced
default rings on multi-port devices, new PCI IDs. Of particular note,

CPU affinity hints from Vasundhara Volam.

TC Flower eswitch support from Sathya Perla.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:57:10 -07:00
Sathya Perla
d7bc730530 bnxt_en: add code to query TC flower offload stats
This patch adds code to implement TC_CLSFLOWER_STATS TC-cmd and the
required FW code to query the stats from the HW.

Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:57:10 -07:00
Sathya Perla
db1d36a273 bnxt_en: add TC flower offload flow_alloc/free FW cmds
This patch adds the hwrm_cfa_flow_alloc/free() routines
that are needed to issue the FW cmds needed for TC flower offload.

Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:57:10 -07:00
Sathya Perla
2ae7408fed bnxt_en: bnxt: add TC flower filter offload support
This patch adds support for offloading TC based flow
rules and actions for the 'flower' classifier in the bnxt_en driver.
It includes logic to parse flow rules and actions received from the
TC subsystem, store them and issue the corresponding
hwrm_cfa_flow_alloc/free FW cmds. L2/IPv4/IPv6 flows and drop,
redir, vlan push/pop actions are supported in this patch.

In this patch the hwrm_cfa_flow_xxx routines are just stubs.
The code for these routines is introduced in the next patch for easier
review. Also, the code to query the TC/flower action stats will
be introduced in a subsequent patch.

Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:57:10 -07:00
Sathya Perla
70855603e0 bnxt_en: fix clearing devlink ptr from bnxt struct
The routine bnxt_link_bp_to_dl() is used to set the devlink ptr
in bnxt struct (bp) and also to set the bnxt back ptr in
the devlink struct.  If devlink_register() fails, bp->dl must
be cleared which is not happening currently. This patch fixes
bnxt_link_bp_to_dl() to clear bp->dl by passing  a NULL dl ptr.

Fixes: 4ab0c6a8ff ("bnxt_en: add support to enable VF-representors")
Signed-off-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:57:10 -07:00
Michael Chan
d5430d31ca bnxt_en: Reduce default rings on multi-port cards.
Reduce default rings from 8 to 4 on multi-port cards to reduce memory
usage.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:57:10 -07:00
Michael Chan
903649e718 bnxt_en: Improve -ENOMEM logic in NAPI poll loop.
If we cannot allocate RX buffers in the NAPI poll loop when processing
an RX event, the current code does not count that event towards the NAPI
budget.  This can cause us to potentially loop forever in NAPI if we
consistently cannot allocate new buffers.  Improve it by counting
-ENOMEM event as 1 towards the NAPI budget.

Cc: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Reported-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:57:10 -07:00
Scott Branden
27573a7d90 bnxt: initialize board_info values with proper enums
initialize board_info values with proper enums for defensive programming
purposes.  This will avoid any errors of the enums being declared not
lining up with the board_info array.

Signed-off-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:57:09 -07:00
Ray Jui
4a58139b84 bnxt: Add PCIe device IDs for bcm58802/bcm58808
Add PCIe device ID for bcm58802 and bcm58808. Also add chip number
update to declare bcm588xx as chip class phase 4 and later

Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:57:09 -07:00
Vasundhara Volam
56f0fd80d1 bnxt_en: assign CPU affinity hints to bnxt_en IRQs
This patch provides hints to irqbalance to map bnxt_en device IRQs
to specific CPU cores. cpumask_local_spread() is used, which first
maps IRQs to near NUMA cores; when those cores are exhausted, IRQs
are mapped to far NUMA cores.

Signed-off-by: Vasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:57:09 -07:00
Michael Chan
98fdbe73bf bnxt_en: Improve tx ring reservation logic.
When the number of TX rings is changed (e.g. ethtool -L, enabling XDP TX
rings, etc), the current code tries to reserve the new number of TX rings
before closing and re-opening the NIC.  If we are unable to reserve the
new TX rings, we abort the operation and keep the current TX rings.

The problem is that the firmware will disable the current TX rings even
when it cannot reserve the new set of TX rings.  We fix it as follows:

1. Instead of reserving the new set of TX rings, just ask the firmware
to check if the new set of TX rings is available.  There is a flag in
the firmware message to do that.  If not available, abort and the
current TX rings will not be disabled.

2. Do the actual TX ring reservation in the path that opens the NIC.
We keep the number of TX rings currently successfully reserved.  If the
number of TX rings is different than the reserved TX rings, we call
firmware and reserve again.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:57:09 -07:00
Michael Chan
6a17eb27bf bnxt_en: Update firmware interface spec. to 1.8.1.4.
Flow APIs are added in this firmware interface.

Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:57:09 -07:00
David S. Miller
33b86ba057 Merge branch 'NCSI-vlan-filtering'
Samuel Mendoza-Jonas says:

====================
NCSI VLAN Filtering Support

This series (mainly patch 2) adds VLAN filtering to the NCSI implementation.
A fair amount of code already exists in the NCSI stack for VLAN filtering but
none of it is actually hooked up. This goes the final mile and fixes a few
bugs in the existing code found along the way (patch 1).

Patch 3 adds the appropriate flag and callbacks to the ftgmac100 driver to
enable filtering as it's a large consumer of NCSI (and what I've been
testing on).

v3:	- Add comment describing change to ncsi_find_filter()
	- Catch NULL in clear_one_vid() from ncsi_get_filter()
	- Simplify state changes when kicking updated channel
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:49:49 -07:00
Samuel Mendoza-Jonas
51564585d8 ftgmac100: Support NCSI VLAN filtering when available
Register the ndo_vlan_rx_{add,kill}_vid callbacks and set the
NETIF_F_HW_VLAN_CTAG_FILTER if NCSI is available.
This allows the VLAN core to notify the NCSI driver when changes occur
so that the remote NCSI channel can be properly configured to filter on
the set VLAN tags.

Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:49:49 -07:00
Samuel Mendoza-Jonas
21acf63013 net/ncsi: Configure VLAN tag filter
Make use of the ndo_vlan_rx_{add,kill}_vid callbacks to have the NCSI
stack process new VLAN tags and configure the channel VLAN filter
appropriately.
Several VLAN tags can be set and a "Set VLAN Filter" packet must be sent
for each one, meaning the ncsi_dev_state_config_svf state must be
repeated. An internal list of VLAN tags is maintained, and compared
against the current channel's ncsi_channel_filter in order to keep track
within the state. VLAN filters are removed in a similar manner, with the
introduction of the ncsi_dev_state_config_clear_vids state. The maximum
number of VLAN tag filters is determined by the "Get Capabilities"
response from the channel.

Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:49:49 -07:00
Samuel Mendoza-Jonas
8579a67e13 net/ncsi: Fix several packet definitions
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:49:49 -07:00
David S. Miller
a74e344a99 Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2017-08-27

This series contains updates to i40e and i40evf only.

Sudheer updates code comments and state variable so that adminq_subtask
will have accutate information whenever it gets scheduled.

Mariusz stores information about FEC modes, to be used to printing link
states information, so that we do not need to call admin queue when
reporting link status.  Adds VF support for controlling VLAN tag
stripping via ethtool.

Jake provides the majority of changes in this series, starting with
increasing the size of the prefix buffer so that it can hold enough
characters for every possible input, which prevents snprintf truncation.
Fixed other string truncation errors/warnings produced by GCC 7.x.
Removed an unnecessary workaround for resetting XPS.  Fixed an issue
where there is a mismatched affinity mask value, so initialize the value
to cpu_possible_mask and invert the logic for checking incorrect CPU vs
IRQ affinity so that the exceptional case is handled at the check.
Removed ULTRA latency mode due to several issues found and will be
looking at better solution for small packet workloads.

Akeem fixes an issue where the incorrect flag was being used to set
promiscuous mode for unicast, which was enabling promiscuous mode only
for multicast instead of unicast.

Carolyn fixes an issue where an error return value is set, but this
value can be overwritten before we actually do exit the function.  So
remove the error code assignment and add code comments for better
understanding on why we do not need to set and return the error.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:46:25 -07:00
Linus Torvalds
9c3a815f47 page waitqueue: always add new entries at the end
Commit 3510ca20ec ("Minor page waitqueue cleanups") made the page
queue code always add new waiters to the back of the queue, which helps
upcoming patches to batch the wakeups for some horrid loads where the
wait queues grow to thousands of entries.

However, I forgot about the nasrt add_page_wait_queue() special case
code that is only used by the cachefiles code.  That one still continued
to add the new wait queue entries at the beginning of the list.

Fix it, because any sane batched wakeup will require that we don't
suddenly start getting new entries at the beginning of the list that we
already handled in a previous batch.

[ The current code always does the whole list while holding the lock, so
  wait queue ordering doesn't matter for correctness, but even then it's
  better to add later entries at the end from a fairness standpoint ]

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-08-28 16:45:40 -07:00
Aviad Krawczyk
cde66f24c3 net-next/hinic: fix comparison of a uint16_t type with -1
Remove the search for index of constant buffer size

Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:44:39 -07:00
Aviad Krawczyk
52f31422d4 net-next/hinic: Fix MTU limitation
Fix the hw MTU limitation by setting max_mtu

Signed-off-by: Aviad Krawczyk <aviad.krawczyk@huawei.com>
Signed-off-by: Zhao Chen <zhaochen6@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:43:46 -07:00
David S. Miller
70f5c98228 Merge branch 'irda-move-to-staging'
Greg Kroah-Hartman says:

====================
irda: move it to drivers/staging so we can delete it

The IRDA code has long been obsolete and broken.  So, to keep people
from trying to use it, and to prevent people from having to maintain it,
let's move it to drivers/staging/ so that we can delete it entirely from
the kernel in a few releases.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:42:57 -07:00
Greg Kroah-Hartman
333b3d070f staging: irda: add a TODO file.
The irda code will be deleted in a future kernel release, so no need to
have anyone do any new work on it.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:42:57 -07:00
Greg Kroah-Hartman
5bf916ee0a irda: move include/net/irda into staging subdirectory
And finally, move the irda include files into
drivers/staging/irda/include/net/irda.  Yes, it's a long path, but it
makes it easy for us to just add a Makefile directory path addition and
all of the net and drivers code "just works".

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:42:57 -07:00
Greg Kroah-Hartman
6c391ff758 irda: move drivers/net/irda to drivers/staging/irda/drivers
Move the irda drivers from drivers/net/irda/ to
drivers/staging/irda/drivers as they will be deleted in a future kernel
release.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:42:57 -07:00
Greg Kroah-Hartman
1ca163afb6 irda: move net/irda/ to drivers/staging/irda/net/
It's time to get rid of IRDA.  It's long been broken, and no one seems
to use it anymore.  So move it to staging and after a while, we can
delete it from there.

To start, move the network irda core from net/irda to
drivers/staging/irda/net/

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:42:56 -07:00
Toshi Kani
5e93232194 intel_pstate: convert to use acpi_match_platform_list()
Convert to use acpi_match_platform_list() for the platform check.
There is no change in functionality.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-29 01:42:49 +02:00
Toshi Kani
5aa5911a0e ACPI / blacklist: add acpi_match_platform_list()
ACPI OEM ID / OEM Table ID / Revision can be used to identify
a platform based on ACPI firmware info.  acpi_blacklisted(),
intel_pstate_platform_pwr_mgmt_exists(), and some other funcs,
have been using similar check to detect a list of platforms
that require special handlings.

Move the platform check in acpi_blacklisted() to a new common
utility function, acpi_match_platform_list(), so that other
drivers do not have to implement their own version.

There is no change in functionality.

Signed-off-by: Toshi Kani <toshi.kani@hpe.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-08-29 01:42:48 +02:00
David S. Miller
9d8c7e5a87 Merge branch 'dpaa_eth-rss'
Madalin Bucur says:

====================
Add RSS to DPAA 1.x Ethernet driver

This patch set introduces Receive Side Scaling for the DPAA Ethernet
driver. Documentation is updated with details related to the new
feature and limitations that apply.
Added also a small fix.

v2: removed a C++ style comment
v3: move struct fman to header file to avoid exporting a function
v4: addressed compilation issues introduced in v3
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:41:01 -07:00
Madalin Bucur
52600dcc9e dpaa_eth: check allocation result
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:41:01 -07:00
Madalin Bucur
0659191630 Documentation: networking: add RSS information
Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-28 16:41:01 -07:00