Commit graph

533,100 commits

Author SHA1 Message Date
Mauro Carvalho Chehab
3d6d213776 [media] DocBook: Better document DTMB time interleaving
The DTMB time interleaving was not properly documented. Add
a documentation for it.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:31 -03:00
Mauro Carvalho Chehab
00c91dfd7b [media] DocBook: Add entry IDs for the enums defined at dvbproperty.xml
There are lots of enums that are defined at dvbproperty.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:31 -03:00
Mauro Carvalho Chehab
8de4d9ecb7 [media] Docbook: add entry IDs for enum fe_sec_voltage
enum fe_sec_voltage is documented together with FE_SET_VOLTAGE.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:31 -03:00
Mauro Carvalho Chehab
81d6f2f8b8 [media] DocBook: add entry IDs for enum fe_sec_tone_mode
enum fe_sec_tone_mode is documented together with FE_SET_TONE.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:30 -03:00
Mauro Carvalho Chehab
e7852571a4 [media] DocBook: add entry IDs for enum fe_status
enum fe_status is documented together with FE_READ_STATUS.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:30 -03:00
Mauro Carvalho Chehab
764368ceb8 [media] DocBook: add entry IDs for enum fe_sec_mini_cmd
enum fe_sec_mini_cmd is documented together with
FE_DISEQC_SEND_BURST.

Add xrefs for each entry there. This makes the hyperlinks at
frontend.h to go directly to the right documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:30 -03:00
Mauro Carvalho Chehab
85cb78b564 [media] DocBook: Add entry IDs for enum fe_caps
enum fe_caps is documented at FE_GET_INFO ioctl. Add xrefs
for each entry there. This makes the hyperlinks at frontend.h
to go directly to the right documentation.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:29 -03:00
Mauro Carvalho Chehab
2695e66f94 [media] DocBook: handle enums on frontend.h
In order to be sure that all enum definitions will be documented,
let's parse the enum values and add xref links to them.

Lots of missing references will be risen as we miss adding
id's to those symbols at the documentation. Next patches will
fix this.

Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:47:29 -03:00
Hans Verkuil
7f3c2e1d1d [media] cx231xx: fix compiler warning
Fix this compiler warning by allocating a structure to read the eeprom instead
of doing it on the stack and worse: the eeprom array is static, so that can
cause problems if there are multiple cx231xx instances.

cx231xx-cards.c: In function 'cx231xx_card_setup':
cx231xx-cards.c:1110:1: warning: the frame size of 2064 bytes is larger than 2048 bytes [-Wframe-larger-than=]
 }
 ^

I did consider removing the code altogether since the result is actually
not used at the moment, but I decided against it since it is used in other
drivers and someone might want to start using it in this driver as well. And
then it is useful that the code is already there.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:46:24 -03:00
Prashant Laddha
d0154d83a8 [media] vivid: Use interlaced info for cvt/gtf timing detection
The detect_cvt/gtf() now supports timing calculations for interlaced
format.

Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:45:05 -03:00
Prashant Laddha
061ddda681 [media] v4l2-dv-timings: add interlace support in detect cvt/gtf
Extend detect_cvt/gtf API to indicate the format type (interlaced
or progressive). In case of interlaced, the vertical front and back
porch and vsync values for both (odd,even) fields are considered to
derive image height. Populated vsync, vertical front, back porch
values in bt timing structure for even and odd fields and updated
the flags appropriately.

Also modified the functions calling the detect_cvt/gtf(). As of now
these functions are calling detect_cvt/gtf() with interlaced flag
set to false.

Cc: Martin Bugge <marbugge@cisco.com>
Cc: Mats Randgaard <matrandg@cisco.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:44:42 -03:00
Hans Verkuil
8cf6874e84 [media] v4l2-dv-timings: support interlaced in v4l2_print_dv_timings
The v4l2_print_dv_timings() didn't log the interlaced format correctly. The timings
for the bottom field weren't logged and the fields per second value was half of what
it should have been.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:42:41 -03:00
Prashant Laddha
dc0cf4cfed [media] v4l2-dv-timing: avoid rounding twice in gtf hblank calc
Currently, in gtf hblank calculations, the rounding is used twice,
one at intermediate division and one at final state where hblank
is rounded to nearest multiple of twice cell granularity. This
error got introduced in 'commit d7ed5a3dda ("[media]
v4l2-dv-timings: fix rounding in hblank and hsync calculation"),
where it missed combining the rounding step. Correcting the same
in this patch.

Signed-off-by: Prashant Laddha <prladdha@cisco.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:41:47 -03:00
Hans Verkuil
7a5d99e7c9 [media] adv7604: log alt-gamma and HDMI colorspace
Log the alternate gamma state and the HDMI colorspace that the adv
device detected.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:38:54 -03:00
Hans Verkuil
5dd7d88a5e [media] adv7604: fix broken saturator check
The logging of the saturator status was wrong due to an incorrect
condition.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:37:35 -03:00
Hans Verkuil
516613c177 [media] adv7604: log infoframes
Add support for logging the detected InfoFrames for the adv76xx. Helps in
debugging what is actually received on the HDMI link.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:34:35 -03:00
Hans Verkuil
b4dbad8fe3 [media] adv7511: log the currently set infoframes
The adv7511 sets up InfoFrames that are used when transmitting video.
Log the contents of those InfoFrames so it is possible to see exactly what
the transmitter is sending.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:30:39 -03:00
Hans Verkuil
28a769f1ab [media] adv7842: replace uintX_t by uX for consistency
Currently this driver mixes u8/u32 and uint8_t/uint32_t. Standardize on
u8/u32.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:29:12 -03:00
Hans Verkuil
5be50ef1ef [media] adv7511: replace uintX_t by uX for consistency
Currently this driver mixes u8/u16 and uint8_t/uint16_t. Standardize on
u8/u16.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:28:39 -03:00
Hans Verkuil
7bcff1c242 [media] vim2m: add create_bufs and prepare_buf support
Add support for the missing VIDIOC_CREATE_BUFS and VIDIOC_PREPARE_BUF
ioctls.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:27:38 -03:00
Hans Verkuil
e68cf471e7 [media] v4l2-mem2mem: add support for prepare_buf
This was never added for some reason, so add it now.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:25:35 -03:00
Antti Palosaari
f00245c2e8 [media] fc2580: add missing error status when probe() fails
We must return -ENODEV error on case probe() fails to detect chip.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:22:57 -03:00
Antti Palosaari
ab80b19bb9 [media] tda10071: add missing error status when probe() fails
We must return -ENODEV error on case probe() fails to detect chip.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:22:28 -03:00
Dan Carpenter
4347df6a7f [media] m88ds3103: a couple missing error codes
We need to set some error codes here.

Fixes: f01919e8f5 ('[media] m88ds3103: add I2C client binding')

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09 17:20:42 -03:00
Alexis Green
e060e7adc2 mac80211: Always check rates and capabilities in mesh mode
In mesh mode there is a race between establishing links and processing
rates and capabilities in beacons. This is very noticeable with slow
beacons (e.g. beacon intervals of 1s) and manifested for us as stations
using minstrel when minstrel_ht should be used. Fixed by changing
mesh_sta_info_init so that it always checks rates and such if it has not
already done so.

Signed-off-by: Alexis Green <agreen@cococorp.com>
CC: Jesse Jones <jjones@cococorp.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09 22:05:06 +02:00
Chun-Yeow Yeoh
8df734e865 mac80211: fix the beacon csa counter for mesh and ibss
The csa counter has moved from sdata to beacon/presp but
it is not updated accordingly for mesh and ibss. Fix this.

Fixes: af296bdb8d ("mac80211: move csa counters from sdata to beacon/presp")
Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09 22:04:25 +02:00
Alexis Green
afd2efb919 mac80211: Fix incorrectly named last_hop_metric variable in mesh_rx_path_sel_frame
The last hop metric should refer to link cost (this is how
hwmp_route_info_get uses it for example). But in mesh_rx_path_sel_frame
we are not dealing with link cost but with the total cost to the origin
of a PREQ or PREP.

Signed-off-by: Alexis Green <agreen@cococorp.com>
CC: Jesse Jones <jjones@cococorp.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09 21:53:35 +02:00
Sara Sharon
74d803b602 mac80211: ignore invalid scan RSSI values
Channels in 2.4GHz band overlap, this means that if we
send a probe request on channel 1 and then move to channel
2, we will hear the probe response on channel 2. In this
case, the RSSI will be lower than if we had heard it on
the channel on which it was sent (1 in this case).

The scan result ignores those invalid values and the
station last signal should not be updated as well.

In case the scan determines the signal to be invalid turn on
the flag so the station last signal will not be updated with
the value and thus user space probing for NL80211_STA_INFO_SIGNAL
and NL80211_STA_INFO_SIGNAL_AVG will not get this invalid RSSI
value.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09 21:51:59 +02:00
Michal Kazior
d01f858c78 mac80211: release channel on auth failure
There were a few rare cases when upon
authentication failure channel wasn't released.
This could cause stale pointers to remain in
chanctx assigned_vifs after interface removal and
trigger general protection fault later.

This could be triggered, e.g. on ath10k with the
following steps:

 1. start an AP
 2. create 2 extra vifs on ath10k host
 3. connect vif1 to the AP
 4. connect vif2 to the AP
    (auth fails because ath10k firmware isn't able
     to maintain 2 peers with colliding AP mac
     addresses across vifs and consequently
     refuses sta_info_insert() in
     ieee80211_prep_connection())
 5. remove the 2 extra vifs
 6. goto step 2; at step 3 kernel was crashing:

 general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC
 Modules linked in: ath10k_pci ath10k_core ath
 ...
 Call Trace:
  [<ffffffff81a2dabb>] ieee80211_check_combinations+0x22b/0x290
  [<ffffffff819fb825>] ? ieee80211_check_concurrent_iface+0x125/0x220
  [<ffffffff8180f664>] ? netpoll_poll_disable+0x84/0x100
  [<ffffffff819fb833>] ieee80211_check_concurrent_iface+0x133/0x220
  [<ffffffff81a0029e>] ieee80211_open+0x3e/0x80
  [<ffffffff817f2d26>] __dev_open+0xb6/0x130
  [<ffffffff817f3051>] __dev_change_flags+0xa1/0x170
 ...
 RIP  [<ffffffff81a23140>] ieee80211_chanctx_radar_detect+0xa0/0x170

 (gdb) l * ieee80211_chanctx_radar_detect+0xa0
 0xffffffff81a23140 is in ieee80211_chanctx_radar_detect (/devel/src/linux/net/mac80211/util.c:3182).
 3177             */
 3178            WARN_ON(ctx->replace_state == IEEE80211_CHANCTX_REPLACES_OTHER &&
 3179                    !list_empty(&ctx->assigned_vifs));
 3180
 3181            list_for_each_entry(sdata, &ctx->assigned_vifs, assigned_chanctx_list)
 3182                    if (sdata->radar_required)
 3183                            radar_detect |= BIT(sdata->vif.bss_conf.chandef.width);
 3184
 3185            return radar_detect;

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09 21:51:01 +02:00
Jakub Kicinski
c2d3955ba3 mac80211: remove obsolete sentence from documentation
FIF_PROMISC_IN_BSS was removed in commit df1404650c
("mac80211: remove support for IFF_PROMISC").

Signed-off-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09 21:48:20 +02:00
Johannes Berg
472be00d04 mac80211: handle aggregation session timeout on fast-xmit path
The conversion to the fast-xmit path lost proper aggregation session
timeout handling - the last_tx wasn't set on that path and the timer
would therefore incorrectly tear down the session periodically (with
those drivers/rate control algorithms that have a timeout.)

In case of iwlwifi, this was every 5 seconds and caused significant
throughput degradation.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09 21:38:40 +02:00
Rob Herring
2a4462418a tty/serial: kill off set_irq_flags usage
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:

IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN

For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also set IRQ_NOPROBE and this has been maintained although it is not
clear that is really needed. There appears to be a great deal of blind
copy and paste of this code.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Barry Song <baohua@kernel.org>
Cc: linux-serial@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-09 12:26:32 -07:00
Rob Herring
fc6b68ba49 usb: chipidea: add work-around for Marvell HSIC PHY startup
The Marvell 28nm HSIC PHY requires the port to be forced to HS mode after
the port power is applied. This is done using the test mode in the PORTSC
register.

As HSIC is always HS, this work-around should be safe to do with all HSIC
PHYs and has been tested on i.MX6S.

Signed-off-by: Rob Herring <robh@kernel.org>
Tested-by: Peter Chen <Peter.Chen@freescale.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-09 12:20:30 -07:00
Rob Herring
d95699be18 usb: chipidea: allow multiple instances to use default ci_default_pdata
Currently, ci_default_pdata is common to all instances of the driver and
gets modified by the core driver code. This is bad if there are multiple
instances of the device with different settings such as the phy type. Fix
this by making a copy of the default platform_data.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Peter Chen <Peter.Chen@freescale.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-09 12:20:30 -07:00
Rob Herring
9d062b9b41 dt-bindings: Consolidate ChipIdea USB ci13xxx bindings
Combine the ChipIdea USB binding into a single document to reduce
duplication and fragmentation. This marks use of the old PHY bindings as
deprecated. Future compatible bindings should use generic PHY binding.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Ivan T. Ivanov <iivanov@mm-sol.com>
Cc: Peter Chen <peter.chen@freescale.com>
Cc: Daniel Tang <dt.tangr@gmail.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-09 12:20:30 -07:00
Rob Herring
10d9029bcb phy: add Marvell HSIC 28nm PHY
Add PHY driver for the Marvell HSIC 28nm PHY. This PHY is found in PXA1928
SOC.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-09 12:20:30 -07:00
Rob Herring
603c5f9d9c phy: Add Marvell USB 2.0 OTG 28nm PHY
Add driver for USB 28nm PHY found in Marvell PXA1928 SOC.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-09 12:20:30 -07:00
Rob Herring
6c95ff9c1c dt-bindings: Add Marvell PXA1928 USB and HSIC PHY bindings
Add PHY binding for Marvell PXA1928 SOC's USB and HSIC PHYs.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-09 12:20:30 -07:00
Rob Herring
e723f2ceb1 regmap: kill off set_irq_flags usage
set_irq_flags is ARM specific with custom flags which have genirq
equivalents. Convert drivers to use the genirq interfaces directly, so we
can kill off set_irq_flags. The translation of flags is as follows:

IRQF_VALID -> !IRQ_NOREQUEST
IRQF_PROBE -> !IRQ_NOPROBE
IRQF_NOAUTOEN -> IRQ_NOAUTOEN

For IRQs managed by an irqdomain, the irqdomain core code handles clearing
and setting IRQ_NOREQUEST already, so there is no need to do this in
.map() functions and we can simply remove the set_irq_flags calls. Some
users also set IRQ_NOPROBE and this has been maintained although it is not
clear that is really needed. There appears to be a great deal of blind
copy and paste of this code.

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-09 20:08:57 +01:00
Mark Brown
c456b89a93 regulator: core: Don't corrupt display when printing uV offsets
We weren't taking into account the already used buffer when telling
sprintf() where to print to.

Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-09 19:57:50 +01:00
Michael Holzheu
6651ee070b s390/bpf: implement bpf_tail_call() helper
bpf_tail_call() arguments:

 - ctx......: Context pointer
 - jmp_table: One of BPF_MAP_TYPE_PROG_ARRAY maps used as the jump table
 - index....: Index in the jump table

In this implementation s390x JIT does stack unwinding and jumps into the
callee program prologue. Caller and callee use the same stack.

With this patch a tail call generates the following code on s390x:

 if (index >= array->map.max_entries)
         goto out
 000003ff8001c7e4: e31030100016   llgf    %r1,16(%r3)
 000003ff8001c7ea: ec41001fa065   clgrj   %r4,%r1,10,3ff8001c828

 if (tail_call_cnt++ > MAX_TAIL_CALL_CNT)
         goto out;
 000003ff8001c7f0: a7080001       lhi     %r0,1
 000003ff8001c7f4: eb10f25000fa   laal    %r1,%r0,592(%r15)
 000003ff8001c7fa: ec120017207f   clij    %r1,32,2,3ff8001c828

 prog = array->prog[index];
 if (prog == NULL)
         goto out;
 000003ff8001c800: eb140003000d   sllg    %r1,%r4,3
 000003ff8001c806: e31310800004   lg      %r1,128(%r3,%r1)
 000003ff8001c80c: ec18000e007d   clgij   %r1,0,8,3ff8001c828

 Restore registers before calling function
 000003ff8001c812: eb68f2980004   lmg     %r6,%r8,664(%r15)
 000003ff8001c818: ebbff2c00004   lmg     %r11,%r15,704(%r15)

 goto *(prog->bpf_func + tail_call_start);
 000003ff8001c81e: e31100200004   lg      %r1,32(%r1,%r0)
 000003ff8001c824: 47f01006       bc      15,6(%r1)

Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-09 11:47:10 -07:00
Irina Tirdea
e70b03071c Input: goodix - export id and version read from device
Goodix touchscreens export through their registers a Product ID and
Firmware Version. The Product ID is an ASCII encoding of the product name
(e.g.: "911").

Export to sysfs (through the input subsystem) the product id and firmware
version read from the device rather than using constant values.

Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-09 11:23:27 -07:00
Irina Tirdea
0e0432f04e Input: goodix - fix variable length array warning
Fix sparse warning:

drivers/input/touchscreen/goodix.c:182:26: warning: Variable length array is used.

Replace the variable length array with fixed length.

Some Goodix devices have maximum 5 touch points, while others have 10 touch
points. Using the maximum length (80 bytes) for all devices will lead to
wasting 40 bytes on stack when using devices with maximum 5 touch points.
However, that is preferable to using kmalloc which will use even more
resources.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-09 11:23:26 -07:00
Irina Tirdea
0dfb35bd39 Input: goodix - fix alignment issues
Fix alignment to match open parenthesis detected by running checkpatch.pl
--strict.

Signed-off-by: Irina Tirdea <irina.tirdea@intel.com>
Acked-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-09 11:23:25 -07:00
Steve Twiss
5179f0ce2f Input: add OnKey driver for DA9063 MFD part
This adds OnKey driver support for DA9063.

Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2015-06-09 11:23:24 -07:00
Jyri Sarha
9fbd58cf4a ASoC: davinci-mcasp: Choose PCM driver based on configured DMA controller
Find the configured DMA controller by asking for a DMA channel in the
probe phase and releasing it right after. The controller device can be
found via the dma_chan struct and the controller is recognized from
the compatible property of its device node. The patch assumes EDMA if
there is no device node.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-09 19:00:52 +01:00
Lars-Peter Clausen
6876c7c884 ASoC: rx51: Automatically disconnect non-connected pins
According to the schematics the external speaker is differential, so the
HPLCOM and HPRCOM pins of the CODEC should be connected to it.

Otherwise the routing looks complete, so add the missing routes and set the
fully_routed flag of the card instead of manually marking the unused inputs
and outputs as not connected. This makes the code a bit shorter and
cleaner.

Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-09 18:57:30 +01:00
Madhusudhanan Ravindran
21175ef7e0 staging: wilc1000: remove unused variables
removed few variables which are assigned but
never used.

Signed-off-by: Madhusudhanan Ravindran <mravindr@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-09 10:43:11 -07:00
Sudip Mukherjee
11f2323ad3 staging: fbtft: fix build error
while building on i386 it gives a build warning about msg undeclared.

Fixes: e6ffd1ba55 ("staging: fbtft: fix out of bound access")
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-09 10:37:52 -07:00
Haikun Wang
c042af95a2 spi: spi-fsl-dspi: Change the way of increasing spi_message->actual_length
In current driver, we increase actual_length in the following way:
message->actual_length += dspi_xxx_transfer()
It has two defects.
First, transmitting maybe in process when the function call finished and
we don't know the transmitting result in this moment.
Secondly, the last sentence in function before returning is accessing the
SPI register and trigger the data transmitting. If we enable interrupt,
interrupt may be generated before function return and we also have the same
sentence "message->actual_length += dspi_xxx_transfer()"
in the IRQ handler.
And usually dspi_xxx_transfer will trigger a new IRQ.
The original dspi_xxx_transfer call may return when no new IRQ generate.
This may mess the variable spi_message->actual_length.
Now we increase the variable in the IRQ handler and only when we get the
TCF or EOQ interrupt
And we get the transmitted data length from the SPI transfer counter
instead of the function return value.

Signed-off-by: Haikun Wang <haikun.wang@freescale.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-06-09 18:35:54 +01:00