remove unused register definitions, left from the split with the
altera-tse mac driver.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When disabling the SGMII mode bit, the PCS defaults to 1000BaseX mode.
In that mode, we don't need to set the speed since it's always 1000Mbps.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Software resets on the TSE PCS don't clear registers, but rather reset
all internal state machines regarding AN, comma detection and
encoding/decoding. Use read_poll_timeout to wait for the reset to clear
instead of manually polling the register.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After system resumed on some environment board, the promiscuous mode
is disabled because the SoC turned off. So, call ravb_set_rx_mode() in
the ravb_resume() to fix the issue.
Reported-by: Tho Vu <tho.vu.wh@renesas.com>
Fixes: 0184165b2f ("ravb: add sleep PM suspend/resume support")
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20221128065604.1864391-1-yoshihiro.shimoda.uh@renesas.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The cited commit adds a for loop to check if each port supports lag
or not. But dev is not initialized correctly. Fix it by initializing
dev for each iteration.
Fixes: e87c6a832f ("net/mlx5: E-switch, Fix duplicate lag creation")
Signed-off-by: Chris Mi <cmi@nvidia.com>
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20221129093006.378840-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit c0071be0e1.
The cited commit removed the validity checks which initialized the
window_sz and never removed the use of the now uninitialized variable,
so now we are left with wrong value in the window size and the following
clang warning: [-Wuninitialized]
drivers/net/ethernet/mellanox/mlx5/core/en_accel/macsec.c:232:45:
warning: variable 'window_sz' is uninitialized when used here
MLX5_SET(macsec_aso, aso_ctx, window_size, window_sz);
Revet at this time to address the clang issue due to lack of time to
test the proper solution.
Fixes: c0071be0e1 ("net/mlx5e: MACsec, remove replay window size limitation in offload path")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20221129093006.378840-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add support for reporting link modes,
including `Supported link modes` and `Advertised link modes`,
via ethtool $DEV.
A new command `SPCODE_READ_MEDIA` is added to read info from
management firmware. Also, the mapping table `nfp_eth_media_table`
associates the link modes between NFP and kernel. Both of them
help to support this ability.
Signed-off-by: Yu Xiao <yu.xiao@corigine.com>
Reviewed-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Link: https://lore.kernel.org/r/20221125113030.141642-1-simon.horman@corigine.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On lan966x the layout of the vcap memory is different than on sparx5.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Implement vcap_operations and enable default port keyset configuration
for each port. Now it is possible actually write/read/move entries in
the VCAP.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend matchall with action goto. This is needed to enable the lookup in
the VCAP. It is needed to connect chain 0 to a chain that is recognized
by the HW.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently the only supported action is ACTION_TRAP and the only
dissector is ETH_ADDRS. Others will be added in future patches.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add registers used to access vcap controller.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This provides the lan966x is2 model and adds it to the vcap control
instance that will be provided to the vcap API.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When lan966x driver is initialized, initialize also the VCAP module for
lan966x.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add the keysets, keys, actionsets and actions used by lan966x in IS2.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently there are 2 files that contain the keyfields, keys,
actionfields and actions. First file is used by the kunit while the
second one is used by VCAP api.
The header file that is used by kunit is just a super set of the of the
header file used by VCAP api.
Therefore not to have duplicate information in different files which is
also harder to maintain, create a single file that is used both by API
and by kunit.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot reported use-after-free in tun_detach() [1]. This causes call
trace like below:
==================================================================
BUG: KASAN: use-after-free in notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75
Read of size 8 at addr ffff88807324e2a8 by task syz-executor.0/3673
CPU: 0 PID: 3673 Comm: syz-executor.0 Not tainted 6.1.0-rc5-syzkaller-00044-gcc675d22e422 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x15e/0x461 mm/kasan/report.c:395
kasan_report+0xbf/0x1f0 mm/kasan/report.c:495
notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75
call_netdevice_notifiers_info+0x86/0x130 net/core/dev.c:1942
call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
call_netdevice_notifiers net/core/dev.c:1997 [inline]
netdev_wait_allrefs_any net/core/dev.c:10237 [inline]
netdev_run_todo+0xbc6/0x1100 net/core/dev.c:10351
tun_detach drivers/net/tun.c:704 [inline]
tun_chr_close+0xe4/0x190 drivers/net/tun.c:3467
__fput+0x27c/0xa90 fs/file_table.c:320
task_work_run+0x16f/0x270 kernel/task_work.c:179
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xb3d/0x2a30 kernel/exit.c:820
do_group_exit+0xd4/0x2a0 kernel/exit.c:950
get_signal+0x21b1/0x2440 kernel/signal.c:2858
arch_do_signal_or_restart+0x86/0x2300 arch/x86/kernel/signal.c:869
exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The cause of the issue is that sock_put() from __tun_detach() drops
last reference count for struct net, and then notifier_call_chain()
from netdev_state_change() accesses that struct net.
This patch fixes the issue by calling sock_put() from tun_detach()
after all necessary accesses for the struct net has done.
Fixes: 83c1f36f98 ("tun: send netlink notification when the device is modified")
Reported-by: syzbot+106f9b687cd64ee70cd1@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=96eb7f1ce75ef933697f24eeab928c4a716edefe [1]
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Link: https://lore.kernel.org/r/20221124175134.1589053-1-syoshida@redhat.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce reset parameter to mtk_wed_tx_ring_setup signature.
This is a preliminary patch to add Wireless Ethernet Dispatcher reset
support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce mtk_wed_rx_reset routine in order to reset rx DMA for Wireless
Ethernet Dispatcher available on MT7986 SoC.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Update mtk_wed_stop routine and rename old mtk_wed_stop() to
mtk_wed_deinit(). This is a preliminary patch to add Wireless Ethernet
Dispatcher reset support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Remove duplicated code. Increase poll timeout to 10ms in order to be
aligned with vendor sdk.
This is a preliminary patch to add Wireless Ethernet Dispatcher reset
support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Move MTK_WDMA_RESET_IDX configuration in mtk_wdma_rx_reset routine.
Increase poll timeout to 10ms in order to be aligned with vendor sdk.
This is a preliminary patch to add Wireless Ethernet Dispatcher reset
support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ONIE standard describes the organization of tlv (type-length-value)
arrays commonly stored within NVMEM devices on common networking
hardware.
Several drivers already make use of NVMEM cells for purposes like
retrieving a default MAC address provided by the manufacturer.
What made ONIE tables unusable so far was the fact that the information
where "dynamically" located within the table depending on the
manufacturer wishes, while Linux NVMEM support only allowed statically
defined NVMEM cells. Fortunately, this limitation was eventually tackled
with the introduction of discoverable cells through the use of NVMEM
layouts, making it possible to extract and consistently use the content
of tables like ONIE's tlv arrays.
Parsing this table at runtime in order to get various information is now
possible. So, because many Marvell networking switches already follow
this standard, let's consider using NVMEM cells as a new valid source of
information when looking for a base MAC address, which is one of the
primary uses of these new fields. Indeed, manufacturers following the
ONIE standard are encouraged to provide a default MAC address there, so
let's eventually use it if no other MAC address has been found using the
existing methods.
Link: https://opencomputeproject.github.io/onie/design-spec/hw_requirements.html
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This driver fist makes an expensive DT lookup to retrieve its DT node
(this is a PCI driver) in order to later search for the
base-mac-provider property. This property has no reality upstream and
this code should not have been accepted like this in the first
place. Instead, there is a proper nvmem interface that should be
used. Let's avoid these extra lookups and rely on the nvmem internal
logic.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
I got the following report while doing device(mscc-miim) load test
with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0
If the 'fwnode' is not an acpi node, the refcount is get in
fwnode_mdiobus_phy_device_register(), but it has never been
put when the device is freed in the normal path. So call
fwnode_handle_put() in phy_device_release() to avoid leak.
If it's an acpi node, it has never been get, but it's put
in the error path, so call fwnode_handle_get() before
phy_device_register() to keep get/put operation balanced.
Fixes: bc1bee3b87 ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20221124150130.609420-1-yangyingliang@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch changes the reported ethtool statistics for the lan9303
family of parts covered by this driver.
The TxUnderRun statistic label is renamed to RxShort to accurately
reflect what stat the device is reporting. I did not reorder the
statistics as that might cause problems with existing user code that
are expecting the stats at a certain offset.
Fixes: a1292595e0 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303")
Signed-off-by: Jerry Ray <jerry.ray@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20221128193559.6572-1-jerry.ray@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Third, and hopefully final, set of fixes for v6.1. We are marking the
rsi driver as orphan, have some Information Element parsing fixes to
wilc1000 driver and three small fixes to the stack.
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEiBjanGPFTz4PRfLobhckVSbrbZsFAmOEnFsRHGt2YWxvQGtl
cm5lbC5vcmcACgkQbhckVSbrbZuhVQf/c3MdS++rufVGBcplf7zG5MG8j6pJS9bx
ymuyqsqKoLuPDjLemFIbpcEkkLjt63KYNa8A9wkQ8vSfeg0wPVEym0b234q3XMb0
aAlRBurFAYdIql+aiZI2FxOlKfdLC6d/Sjr/FOe25QfX4H4FxBfZM94nobLawu/d
YBGiI29pauEFqZqBU4I3MAtVbk8/gDIVU318KQavpLuPJZNX5F83M025aokDCVj+
3l69MvphYMVvfOQKS8gLFBBJ41WpSrjIkuH0oQW1fmVc8b6Kiu9wGahOdxDm4JE6
iDiy8LdkvqpXehPMsHPqL/JLMByuJ+q/esZUNoX4vlITordNm/Nj0w==
=iNqa
-----END PGP SIGNATURE-----
Merge tag 'wireless-2022-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.1
Third, and hopefully final, set of fixes for v6.1. We are marking the
rsi driver as orphan, have some Information Element parsing fixes to
wilc1000 driver and three small fixes to the stack.
* tag 'wireless-2022-11-28' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac8021: fix possible oob access in ieee80211_get_rate_duration
wifi: cfg80211: don't allow multi-BSSID in S1G
wifi: cfg80211: fix buffer overflow in elem comparison
wifi: wilc1000: validate number of channels
wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_CHANNEL_LIST attribute
wifi: wilc1000: validate length of IEEE80211_P2P_ATTR_OPER_CHANNEL attribute
wifi: wilc1000: validate pairwise and authentication suite offsets
MAINTAINERS: mark rsi wifi driver as orphan
====================
Link: https://lore.kernel.org/r/20221128113513.6F459C433C1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit f72cd76b05.
This patch is so broken, it hurts. Apparently no one reviewed it and it
passed the build testing (because the code was compiled out), but it was
obviously never compile-tested, since it produces the following build
error, due to an incomplete conversion where an extra argument was left,
although the function being called was left:
stmmac_main.c: In function ‘stmmac_cmdline_opt’:
stmmac_main.c:7586:28: error: too many arguments to function ‘sysfs_streq’
7586 | } else if (sysfs_streq(opt, "pause:", 6)) {
| ^~~~~~~~~~~
In file included from ../include/linux/bitmap.h:11,
from ../include/linux/cpumask.h:12,
from ../include/linux/smp.h:13,
from ../include/linux/lockdep.h:14,
from ../include/linux/mutex.h:17,
from ../include/linux/notifier.h:14,
from ../include/linux/clk.h:14,
from ../drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:17:
../include/linux/string.h:185:13: note: declared here
185 | extern bool sysfs_streq(const char *s1, const char *s2);
| ^~~~~~~~~~~
What's even worse is that the patch is flat out wrong. The stmmac_cmdline_opt()
function does not parse sysfs input, but cmdline input such as
"stmmaceth=tc:1,pause:1". The pattern of using strsep() followed by
strncmp() for such strings is not unique to stmmac, it can also be found
mainly in drivers under drivers/video/fbdev/.
With strncmp("tc:", 3), the code matches on the "tc:1" token properly.
With sysfs_streq("tc:"), it doesn't.
Fixes: f72cd76b05 ("net: stmmac: use sysfs_streq() instead of strncmp()")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20221125105304.3012153-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add CDC-ECM support for LARA-L6.
LARA-L6 module can be configured (by AT interface) in three different
USB modes:
* Default mode (Vendor ID: 0x1546 Product ID: 0x1341) with 4 serial
interfaces
* RmNet mode (Vendor ID: 0x1546 Product ID: 0x1342) with 4 serial
interfaces and 1 RmNet virtual network interface
* CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1343) with 4 serial
interface and 1 CDC-ECM virtual network interface
In CDC-ECM mode LARA-L6 exposes the following interfaces:
If 0: Diagnostic
If 1: AT parser
If 2: AT parser
If 3: AT parset/alternative functions
If 4: CDC-ECM interface
Signed-off-by: Davide Tronchin <davide.tronchin.94@gmail.com>
Link: https://lore.kernel.org/r/20221124112811.3548-1-davide.tronchin.94@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
skb passed to network layer contains incorrect length.
In mux aggregation protocol, the datagram block received
from device contains block signature, packet & datagram
header. The right skb len to be calculated by subracting
datagram pad len from datagram length.
Whereas in mux lite protocol, the skb contains single
datagram so skb len is calculated by subtracting the
packet offset from datagram header.
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Peek throughput UL test is resulting in crash. If the UL
transfer block free list is exhaust, the peeked skb is freed.
In the next transfer freed skb is referred from UL list which
results in crash.
Don't free the skb if UL transfer blocks are unavailable. The
pending skb will be picked for transfer on UL transfer block
available.
Fixes: 1f52d7b622 ("net: wwan: iosm: Enable M.2 7360 WWAN card support")
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix build error reported on armhf while preparing 6.1-rc5
for Debian.
iosm_ipc_protocol.c:244:36: error: passing argument 3 of
'dma_alloc_coherent' from incompatible pointer type.
Change phy_ap_shm type from phys_addr_t to dma_addr_t.
Fixes: faed4c6f6f ("net: iosm: shared memory protocol")
Reported-by: Bonaccorso Salvatore <carnil@debian.org>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sparse warnings - iosm_ipc_mux_codec.c:1474 using plain
integer as NULL pointer.
Use skb_trim() to reset skb tail & len.
Fixes: 9413491e20 ("net: iosm: encode or decode datagram")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tim Harvey reports that link modes which he does not expect to be
supported are being advertised, and this is because of the workaround
we have for PHYs that switch interface modes.
Fix this up by checking whether rate matching will be used for the
requested interface mode, and if rate matching will be used, perform
validation only with the requested interface mode, rather than invoking
this workaround.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
In function nixge_hw_dma_bd_release() dereference of NULL pointer
priv->rx_bd_v is possible for the case of its allocation failure in
nixge_hw_dma_bd_init().
Move for() loop with priv->rx_bd_v dereference under the check for
its validity.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 492caffa8a ("net: ethernet: nixge: Add support for National Instruments XGE netdev")
Signed-off-by: Yuri Karpov <YKarpov@ispras.ru>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ntb_netdev_init_module() returns the ntb_transport_register_client()
directly without checking its return value, if
ntb_transport_register_client() failed, the NTB client device is not
unregistered.
Fix by unregister NTB client device when ntb_transport_register_client()
failed.
Fixes: 548c237c0a ("net: Add support for NTB virtual ethernet device")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1. Added support to filter packets based on IP fragment.
For IPv4 packets check for ip_flag == 0x20 (more fragment bit set).
For IPv6 packets check for next_header == 0x2c (next_header set to
'fragment header for IPv6')
2. Added configuration support from both "ethtool ntuple" and "tc flower".
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All wed versions should enable the wcid overwritten feature,
since the wcid size is controlled by the wlan driver.
Tested-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The am65_cpsw_nuss_cleanup_ndev() function calls unregister_netdev()
even if register_netdev() fails, which triggers WARN_ON(1) in
unregister_netdevice_many(). To fix it, make sure that
unregister_netdev() is called only on registered netdev.
Compile tested only.
Fixes: 84b4aa4932 ("net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmN/JUsACgkQSD+KveBX
+j7J2Qf+OWoBCtXvzTZPdx9NGUnddGpWclZ6zaG9BHIo/V9wzbjpAy4saY4FwiO5
dwvZqt2U/L6WKSwZodeHvS7oGLDOWaaM/TNGxXHYZvk8haDQu9q7wYje+cYeR/cn
lOpVEGTXNBmydWcd8MWu9MbwlntnhUjbjIwuLfPHUJLRCS+GyH5us4M79Ynn3RSZ
DcWXDfTqotISkjbLNdVAY9tET3zsZKH7lwfTwRolYd1CHFbQntvSviuKMxHnUyrD
HsQ49IFv1T8ap9+tvVsLtchyhxz0iVeN+T2sVsNVcSZKD/73jCSf4oU6Z/F5lHhP
LgcN4Ug7YWQuW9Dl6IRQro6yAO19sA==
=7ABk
-----END PGP SIGNATURE-----
Merge tag 'mlx5-fixes-2022-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2022-11-24
This series provides bug fixes to mlx5 driver.
Focusing on error handling and proper memory management in mlx5, in
general and in the newly added macsec module.
I still have few fixes left in my queue and I hope those will be the
last ones for mlx5 for this cycle.
Please pull and let me know if there is any problem.
Happy thanksgiving.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-23 (ixgbevf, i40e, fm10k, iavf, e100)
This series contains updates to various Intel drivers.
Shang XiaoJing fixes init module error path stop to resource leaks for
ixgbevf and i40e.
Yuan Can also does the same for fm10k and iavf.
Wang Hai stops freeing of skb as it was causing use after free error for
e100.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
I got a null-ptr-deref report as following when doing fault injection test:
BUG: kernel NULL pointer dereference, address: 0000000000000058
Oops: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x23e/0x2d0
bus_remove_device+0x1bd/0x240
device_del+0x357/0x770
phy_device_remove+0x11/0x30
mdiobus_unregister+0xa5/0x140
release_nodes+0x6a/0xa0
devres_release_all+0xf8/0x150
device_unbind_cleanup+0x19/0xd0
//probe path:
phy_device_register()
device_add()
phy_connect
phy_attach_direct() //set device driver
probe() //it's failed, driver is not bound
device_bind_driver() // probe failed, it's not called
//remove path:
phy_device_remove()
device_del()
device_release_driver_internal()
__device_release_driver() //dev->drv is not NULL
klist_remove() <- knode_driver is not added yet, cause null-ptr-deref
In phy_attach_direct(), after setting the 'dev->driver', probe() fails,
device_bind_driver() is not called, so the knode_driver->n_klist is not
set, then it causes null-ptr-deref in __device_release_driver() while
deleting device. Fix this by setting dev->driver to NULL in the error
path in phy_attach_direct().
Fixes: e13934563d ("[PATCH] PHY Layer fixup")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-11-23 (ice)
This series contains updates to ice driver only.
Karol adjusts check of PTP hardware to wait longer but check more often.
Brett removes use of driver defined link speed; instead using the values
from ethtool.h, utilizing static tables for indexing.
Ben adds tracking of stats in order to accumulate reported statistics that
were previously reset by hardware.
Marcin fixes issues setting RXDID when queues are asymmetric.
Anatolii re-introduces use of define over magic number; ICE_RLAN_BASE_S.
---
v3:
- Dropped, previous, patch 2
v2:
Patch 5
- Convert some allocations to non-managed
- Remove combined error checking; add error checks for each call
- Remove excess NULL checks
- Remove unnecessary NULL sets and newlines
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace
kmap_atomic() and kunmap_atomic() with kmap_local_page() and kunmap_local()
respectively.
Note that kmap_atomic() disables preemption and page-fault processing, but
kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has
to check if the code being executed between the map/unmap implicitly
depends on page-faults and/or preemption being disabled. If yes, then code
to disable page-faults and/or preemption should also be added for
functional correctness. That however doesn't appear to be the case here,
so just kmap_local_page() is used.
Also note that the page being mapped is not allocated by the driver, and so
the driver doesn't know if the page is in normal memory. This is the reason
kmap_local_page() is used as opposed to page_address().
I don't have hardware, so this change has only been compile tested.
Cc: Michael Jamet <michael.jamet@intel.com>
Cc: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: Yehezkel Bernat <YehezkelShB@gmail.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace
kmap_atomic() and kunmap_atomic() with kmap_local_page() and kunmap_local()
respectively.
Note that kmap_atomic() disables preemption and page-fault processing, but
kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has
to check if the code being executed between the map/unmap implicitly
depends on page-faults and/or preemption being disabled. If yes, then code
to disable page-faults and/or preemption should also be added for
functional correctness. That however doesn't appear to be the case here,
so just kmap_local_page() is used.
Also note that the page being mapped is not allocated by the driver, and so
the driver doesn't know if the page is in normal memory. This is the reason
kmap_local_page() is used as opposed to page_address().
I don't have hardware, so this change has only been compile tested.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace
the map-memcpy-unmap usage pattern (done using k[un]map_atomic()) with
memcpy_from_page(), which internally uses kmap_local_page() and
kunmap_local(). This renders the variable 'vaddr' unnecessary, and so
remove this too.
Note that kmap_atomic() disables preemption and page-fault processing, but
kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has
to check if the code being executed between the map/unmap implicitly
depends on page-faults and/or preemption being disabled. If yes, then code
to disable page-faults and/or preemption should also be added for
functional correctness. That however doesn't appear to be the case here,
so just memcpy_from_page() is used.
Also note that the page being mapped is not allocated by the driver, and so
the driver doesn't know if the page is in normal memory. This is the reason
kmap_local_page() is used (via memcpy_from_page()) as opposed to
page_address().
I don't have hardware, so this change has only been compile tested.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Suggested-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pages for Rx buffers are allocated in cas_page_alloc() using either
GFP_ATOMIC or GFP_KERNEL. Memory allocated with GFP_KERNEL/GFP_ATOMIC can't
come from highmem and so there's no need to kmap() them. Just use
page_address() instead. This makes the variable 'addr' unnecessary, so
remove it too.
Note that kmap_atomic() disables preemption and page-fault processing,
but page_address() doesn't. When removing uses of kmap_atomic(), one has to
check if the code being executed between the map/unmap implicitly depends
on page-faults and/or preemption being disabled. If yes, then code to
disable page-faults and/or preemption should also be added for functional
correctness. That however doesn't appear to be the case here, so just
page_address() is used.
I don't have hardware, so this change has only been compile tested.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
kmap_atomic() is being deprecated in favor of kmap_local_page(). Replace
kmap_atomic() and kunmap_atomic() with kmap_local_page() and kunmap_local()
respectively.
Note that kmap_atomic() disables preemption and page-fault processing, but
kmap_local_page() doesn't. When converting uses of kmap_atomic(), one has
to check if the code being executed between the map/unmap implicitly
depends on page-faults and/or preemption being disabled. If yes, then code
to disable page-faults and/or preemption should also be added for
functional correctness. That however doesn't appear to be the case here,
so just kmap_local_page() is used.
Also note that the page being mapped is not allocated by the driver, and so
the driver doesn't know if the page is in normal memory. This is the reason
kmap_local_page() is used as opposed to page_address().
I don't have hardware, so this change has only been compile tested.
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Cc: Edward Cree <ecree.xilinx@gmail.com>
Cc: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
