Commit graph

94,495 commits

Author SHA1 Message Date
Felix Fietkau
0e668cde0d ath9k: update the ath_max_4ms_framelen table
Include MCS0-31 and also add SGI for HT20. This makes it
possible to support more different rate combinations with
newer hardware.

Based on a patch by Selvam. T.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:53 -04:00
Felix Fietkau
7817e4ceb6 ath9k: update the MCS mask for MCS16 and above
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:53 -04:00
Felix Fietkau
0a8cea844d ath9k: clean up tx buffer handling
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:53 -04:00
Felix Fietkau
c9c99e5e44 ath9k: check for specific rx stuck conditions and recover from them
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:52 -04:00
Holger Schurig
55ee82b500 ath5k: basic support for survey
This adds the first element of survey data, the noise floor figure.

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:52 -04:00
Holger Schurig
1289723ef2 mac80211: sample survey implementation for mac80211 & hwsim
This adds the survey function to both mac80211 itself and to mac80211_hwsim.
For the latter driver, we simply invent some noise level.A real driver which
cannot determine the real channel noise MUST NOT report any noise, especially
not a magically conjured one :-)

Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:52 -04:00
Daniel Yingqiang Ma
03ceedea97 ath9k: Group Key fix for VAPs
When I set up multiple VAPs with ath9k, I encountered an issue that
the traffic may be lost after a while.

The detailed phenomenon is
1. After a while the clients connected to one of these VAPs will get
into a state that no broadcast/multicast packets can be transfered
successfully while the unicast packets can be transfered normally.
2. Minutes latter the unitcast packets transfer will fail as well,
because the ARP entry is expired and it can't be freshed due to the
broadcast trouble.

It's caused by the group key overwritten and someone discussed this
issue in ath9k-devel maillist before, but haven't work out a fix yet.

I referred the method in madwifi, and made a patch for ath9k.
The method is to set the high bit of the sender(AP)'s address, and
associated that mac and the group key. It requires the hardware
supports multicast frame key search. It seems true for AR9160.

Not sure whether it's the correct way to fix this issue. But it seems
to work in my test. The patch is attached, feel free to revise it.

Signed-off-by: Daniel Yingqiang ma <yma.cool@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20 11:50:51 -04:00
Lin Ming
0f849d2cc6 ACPICA: Minimize the differences between linux GPE code and ACPICA code base
We have ported Rafael's major GPE changes
(ACPI: Use GPE reference counting to support shared GPEs) into ACPICA code base.
But the port and Rafael's original patch have some differences, so we made
below patch to make linux GPE code consistent with ACPICA code base.

Most changes are about comments and coding styles.
Other noticeable changes are based on:

Rafael: Reduce code duplication related to GPE lookup
https://patchwork.kernel.org/patch/86237/

Rafael: Always use the same lock for GPE locking
https://patchwork.kernel.org/patch/90471/

A new field gpe_count in struct acpi_gpe_block_info to record the number
of individual GPEs in block.

Rename acpi_ev_save_method_info to acpi_ev_match_gpe_method.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Robert Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:16 -04:00
Lin Ming
aa2110cb1a ACPI: add boot option acpi=copy_dsdt to fix corrupt DSDT
Some BIOS on Toshiba machines corrupt the DSDT, so add a new
boot option acpi=copy_dsdt to workaround it.
Add warning message to ask users to use this option if corrupt DSDT detected.

Also build a DMI blacklist to check it and automatically copy DSDT.

https://bugzilla.kernel.org/show_bug.cgi?id=14679

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:16 -04:00
Bob Moore
43323cb4c4 ACPICA: Update DSDT copy/detection.
Move initialization of DSDT pointer. Emit address of DSDT
in the dump of both table headers (good/bad DSDT).
Now handles the case where the root table can be reallocated,
which would invalidate the original pointer.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:16 -04:00
Lin Ming
69ec87efa8 ACPICA: Add subsystem option to force copy of DSDT to local memory
Optionally copy the entire DSDT to local memory (instead of
simply mapping it.) There are some BIOSs that corrupt or replace
the original DSDT, creating the need for this option. Default is
FALSE, do not copy the DSDT.

https://bugzilla.kernel.org/show_bug.cgi?id=14679

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:16 -04:00
Lin Ming
729df0f848 ACPICA: Add detection of corrupted/replaced DSDT
This change adds support to detect a DSDT that has been corrupted
and/or replaced from outside the OS (by firmware). This is
typically catastrophic for the system, but has been seen on
some machines.

https://bugzilla.kernel.org/show_bug.cgi?id=14679

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:16 -04:00
Bob Moore
c1637e9c64 ACPICA: Add write support for DataTable operation regions
The original implementation only supported reading from a DataTable
region. However, some machines have been seen that actually write
to the ACPI table contained in such a region. This change adds
support for writing to a DataTable region.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:15 -04:00
Alexey Starikovskiy
333b04ae33 ACPICA: Fix for acpi_reallocate_root_table for incorrect root table copy
When copying the root table to the new allocation, the length
used was incorrect. The new size was used instead of the current
table size, meaning too much data was copied.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:15 -04:00
Bob Moore
a7499bc84e ACPICA: Update comments/headers, no functional change
Also split some long lines.

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:43:15 -04:00
Lin Ming
e0f40281d5 ACPICA: Fix for possible fault in acpi_ex_release_mutex
Fixed a problem with the AML Mutex handling function
acpi_ex_release_mutex where the function could fault under the very
rare condition when the interpreter has blocked, the interpreter
lock is released, the interpreter is then reentered via the
same thread, and attempts to acquire a mutex that was previously
acquired. FreeBSD report 140979.

http://www.freebsd.org/cgi/query-pr.cgi?pr=140979

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:42:53 -04:00
Bob Moore
f6a22b0bc4 ACPICA: Standardize integer output for ACPICA warnings/errors
Always use 0x prefix for hex output, use %u for integer output
(all integers are unsigned.)

Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:42:52 -04:00
Lin Ming
4cdf1a562b ACPICA: Enhance configuration for output of AML Debug Object
This change will enable debug object output via a global variable,
acpi_gbl_enable_aml_debug_object. This will help with remote machine
debugging. Also, moved all debug object support code to a new
file, exdebug.c. Entire debug object module can now be
configured out of the ACPICA build if desired.

Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-04-20 10:42:49 -04:00
H Hartley Sweeten
1ca5d2f019 mtd/maps/physmap: catch failure to register MTD_PHYSMAP_COMPAT device
If the default Kconfig values are used with MTD_PHYSMAP_COMPAT you end
up with a resource where end < start.  This causes __request_resource to
return a conflict which then returns an -EBUSY error code.  The current
physmap.c code just assumes that the platfom_device_register will always
succeed.

Catch this failure during the physmap_init and propogate the error.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-04-20 08:53:52 +01:00
Daniel Mack
7fbef0d1e2 Input: eeti_ts - cancel pending work when going to suspend
This fixes a race between the suspend code and input events.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20 00:44:20 -07:00
Takashi Iwai
5f57d67da8 Input: Add support of Synaptics Clickpad device
The new type of touchpads can be detected via a new query command
0x0c. The clickpad flags are in cap[0]:4 and cap[1]:0 bits.

When the device is detected, the driver now reports only the left
button as the supported buttons so that X11 driver can detect that
the device is Clickpad. A Clickpad device gives the button events
only as the middle button. The kernel driver morphs to the left
button. The real handling of Clickpad is done rather in X driver
side.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-04-20 00:42:40 -07:00
Dmitry Torokhov
6d327cb03f Revert "Input: ALPS - add signature for HP Pavilion dm3 laptops"
This reverts commit 5e28d8eb68 since
the magic knock does not work for this model of the touchpad and the
device stays in PS/2 compatibility mode.
2010-04-20 00:37:21 -07:00
Dave Airlie
10fd883ce3 agp/intel: put back check that we have a driver for the bridge.
On my 945 laptop + radeon GPU, I was getting an oops on boot without this
check which seems to have gotten dropped in the rework.

Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 16:38:18 +10:00
Dave Airlie
d4b74bf078 Revert "drm/i915: Configure the TV sense state correctly on GM45 to make TV detection reliable"
Eric mentioned on irc this patch was bad, so revert it.

This reverts commit fb8b5a39b6.

Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:25:51 +10:00
Jesse Barnes
b78315f051 drm: delay vblank cleanup until after driver unload
Drivers may use vblank calls now (e.g. drm_vblank_off) in their unload
paths, so don't clean up the vblank related structures until after
driver unload.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:22:38 +10:00
Dave Airlie
7547a917fa Merge branch 'drm-ttm-unmappable' into drm-core-next
* drm-ttm-unmappable:
  drm/radeon/kms: enable use of unmappable VRAM V2
  drm/ttm: remove io_ field from TTM V6
  drm/vmwgfx: add support for new TTM fault callback V5
  drm/nouveau/kms: add support for new TTM fault callback V5
  drm/radeon/kms: add support for new fault callback V7
  drm/ttm: ttm_fault callback to allow driver to handle bo placement V6
  drm/ttm: split no_wait argument in 2 GPU or reserve wait

Conflicts:
	drivers/gpu/drm/nouveau/nouveau_bo.c
2010-04-20 14:15:09 +10:00
Jerome Glisse
6b8b1786a8 drm/radeon/kms: enable use of unmappable VRAM V2
This patch enable the use of unmappable VRAM thanks to
previous TTM infrastructure change.

V2 update after io_mem_reserve/io_mem_free callback balancing

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:14:25 +10:00
NeilBrown
35f2a59119 md/raid5: allow for more than 2^31 chunks.
With many large drives and small chunk sizes it is possible
to create a RAID5 with more than 2^31 chunks.  Make sure this
works.

Reported-by: Brett King <king.br@gmail.com>
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: stable@kernel.org
2010-04-20 14:13:34 +10:00
Jerome Glisse
0c321c7962 drm/ttm: remove io_ field from TTM V6
All TTM driver have been converted to new io_mem_reserve/free
interface which allow driver to choose and return proper io
base, offset to core TTM for ioremapping if necessary. This
patch remove what is now deadcode.

V2 adapt to match with change in first patch of the patchset
V3 update after io_mem_reserve/io_mem_free callback balancing
V4 adjust to minor cleanup
V5 remove the needs ioremap flag
V6 keep the ioremapping facility in TTM

[airlied- squashed driver removals in here also]

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:13:09 +10:00
Jerome Glisse
96bf8b8778 drm/vmwgfx: add support for new TTM fault callback V5
This add the support for the new fault callback, does change anything
from driver point of view.

Improvement: store the aperture base in a variable so that we don't
call a function to get it on each fault.

Patch hasn't been tested.

V2 don't derefence bo->mem.mm_node as it's not NULL only for
   VRAM or GTT
V3 update after io_mem_reserve/io_mem_free callback balancing
V4 callback has to ioremap
V5 ioremap is done by TTM

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:12:43 +10:00
Jerome Glisse
f32f02fd81 drm/nouveau/kms: add support for new TTM fault callback V5
This add the support for the new fault callback, does change anything
from driver point of view, thought it should allow nouveau to add
support for unmappable VRAM.

Improvement: store the aperture base in a variable so that we don't
call a function to get it on each fault.

Patch hasn't been tested on any hw.

V2 don't derefence bo->mem.mm_node as it's not NULL only for
   VRAM or GTT
V3 update after io_mem_reserve/io_mem_free callback balancing
V4 callback has to ioremap
V5 ioremap is done by ttm

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:12:34 +10:00
Jerome Glisse
0a2d50e3a8 drm/radeon/kms: add support for new fault callback V7
This add the support for the new fault callback and also the
infrastructure for supporting unmappable VRAM.

V2 validate BO with no_wait = true
V3 don't derefence bo->mem.mm_node as it's not NULL only for
   VRAM or GTT
V4 update to splitted no_wait ttm change
V5 update to new balanced io_mem_reserve/free change
V6 callback is responsible for iomapping memory
V7 move back iomapping to ttm

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:12:22 +10:00
Jerome Glisse
82c5da6bf8 drm/ttm: ttm_fault callback to allow driver to handle bo placement V6
On fault the driver is given the opportunity to perform any operation
it sees fit in order to place the buffer into a CPU visible area of
memory. This patch doesn't break TTM users, nouveau, vmwgfx and radeon
should keep working properly. Future patch will take advantage of this
infrastructure and remove the old path from TTM once driver are
converted.

V2 return VM_FAULT_NOPAGE if callback return -EBUSY or -ERESTARTSYS
V3 balance io_mem_reserve and io_mem_free call, fault_reserve_notify
   is responsible to perform any necessary task for mapping to succeed
V4 minor cleanup, atomic_t -> bool as member is protected by reserve
   mecanism from concurent access
V5 the callback is now responsible for iomapping the bo and providing
   a virtual address this simplify TTM and will allow to get rid of
   TTM_MEMTYPE_FLAG_NEEDS_IOREMAP
V6 use the bus addr data to decide to ioremap or this isn't needed
   but we don't necesarily need to ioremap in the callback but still
   allow driver to use static mapping

Signed-off-by: Jerome Glisse <jglisse@redhat.com>
Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 14:12:05 +10:00
Daniel Vetter
a8089e849a drm/i915: drop pointer to drm_gem_object
Luckily the change is quite a little bit less invasive than I've
feared.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 13:23:14 +10:00
Daniel Vetter
62b8b21515 drm/i915: don't use ->driver_private anymore
Thanks to the to_intel_bo helper, this change is rather trivial.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 13:22:56 +10:00
Daniel Vetter
c397b9084c drm/i915: embed the gem object into drm_i915_gem_object
Just embed it and adjust the pointers, No other changes (that's
for later patches).

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 13:22:45 +10:00
Daniel Vetter
ac52bc56de drm/i915: introduce i915_gem_alloc_object
Just preparation, no functional change.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 13:22:26 +10:00
Daniel Vetter
fd632aa34c drm: free core gem object from driver callbacks
When drivers embed the core gem object into their own structures,
they'll have to do this. Temporarily this results in an ugly

kfree(gem_obj);

in every gem driver.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 13:19:33 +10:00
Daniel Vetter
1d397043bc drm: extract drm_gem_object_init
This function can be used by drivers who allocate the drm gem object
on their own. No functional change in here, just preparation.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-20 13:19:25 +10:00
Dave Airlie
153549b8b6 Merge branch 'drm-radeon-evergreen-accel' into drm-core-next
* drm-radeon-evergreen-accel:
  drm/radeon: fix cypress firmware typo.
  drm/radeon/kms/evergreen: add hpd support
  drm/radeon/kms/evergreen: implement irq support
  drm/radeon/kms/evergreen: setup and enable the CP
  drm/radeon/kms/evergreen: implement gfx init
  drm/radeon/kms/evergreen: add soft reset function
  drm/radeon/kms/evergreen: add gart support
  drm/radeon/kms: add support for evergreen power tables
  drm/radeon/kms: update atombios.h power tables for evergreen
2010-04-20 13:16:50 +10:00
Dave Airlie
7fff400be6 Merge branch 'drm-fbdev-cleanup' into drm-core-next
* drm-fbdev-cleanup:
  drm/fb: remove drm_fb_helper_setcolreg
  drm/kms/fb: use slow work mechanism for normal hotplug also.
  drm/kms/fb: add polling support for when nothing is connected.
  drm/kms/fb: provide a 1024x768 fbcon if no outputs found.
  drm/kms/fb: separate fbdev connector list from core drm connectors
  drm/kms/fb: move to using fb helper crtc grouping instead of core crtc list
  drm/fb: fix fbdev object model + cleanup properly.

Conflicts:
	drivers/gpu/drm/i915/i915_drv.h
	drivers/gpu/drm/nouveau/nouveau_drv.h
2010-04-20 13:16:04 +10:00
Dave Airlie
0bcb1d844a Merge branch 'drm-radeon-lockup' into drm-core-next
* drm-radeon-lockup:
  drm/radeon/kms: simplify & improve GPU reset V2
  drm/radeon/kms: rename gpu_reset to asic_reset
  drm/radeon/kms: fence cleanup + more reliable GPU lockup detection V4

Conflicts:
	drivers/gpu/drm/radeon/r300.c
2010-04-20 13:15:05 +10:00
Dave Airlie
c9c2625ff4 Merge branch 'drm-edid-fixes' into drm-core-next
* drm-edid-fixes:
  drm/edid: When checking duplicate standard modes, walked the probed list
  drm/edid: Fix sync polarity for secondary GTF curve
  drm/modes: Fix interlaced mode names
  drm/edid: Add secondary GTF curve support
  drm/edid: Strengthen the algorithm for standard mode codes
  drm/edid: Fix the HDTV hack.
  drm/edid: Extend range-based mode addition for EDID 1.4
  drm/edid: Add test for monitor reduced blanking support.
  drm/edid: Fix preferred mode parse for EDID 1.4
  drm/edid: Remove some silly comments
  drm/edid: Remove arbitrary EDID extension limit
  drm/edid: Add modes for Established Timings III section
  drm/edid: Reshuffle mode list construction to closer match the spec
  drm/edid: Remove a redundant check
  drm/edid: Remove some misleading comments
  drm/edid: Fix secondary block fetch.
2010-04-20 13:14:38 +10:00
Dave Airlie
c2b41276da Merge branch 'drm-ttm-pool' into drm-core-next
* drm-ttm-pool:
  drm/ttm: using kmalloc/kfree requires including slab.h
  drm/ttm: include linux/seq_file.h for seq_printf
  drm/ttm: Add sysfs interface to control pool allocator.
  drm/ttm: Use set_pages_array_wc instead of set_memory_wc.
  arch/x86: Add array variants for setting memory to wc caching.
  drm/nouveau: Add ttm page pool debugfs file.
  drm/radeon/kms: Add ttm page pool debugfs file.
  drm/ttm: Add debugfs output entry to pool allocator.
  drm/ttm: add pool wc/uc page allocator V3
2010-04-20 13:12:28 +10:00
Dave Airlie
97921a5b03 Merge remote branch 'anholt/drm-intel-next' of /home/airlied/kernel/drm-next into drm-core-next
* 'anholt/drm-intel-next' of /home/airlied/kernel/drm-next: (48 commits)
  agp/intel-gtt: kill previous_size assignments
  agp/intel-gtt: kill intel_i830_tlbflush
  agp/intel: split out gmch/gtt probe, part 1
  agp/intel: kill mutli_gmch_chip
  agp/intel: uncoditionally reconfigure driver on resume
  agp/intel: split out the GTT support
  agp/intel: introduce intel-agp.h header file
  drm/i915: Don't touch PORT_HOTPLUG_EN in intel_dp_detect()
  drm/i915/pch: Use minimal number of FDI lanes (v2)
  drm/i915: Add the support of memory self-refresh on Ironlake
  drm/i915: Move Pineview CxSR and watermark code into update_wm hook.
  drm/i915: Only save/restore FBC on the platform that supports FBC
  drm/i915: Fix the incorrect argument for SDVO SET_TV_format command
  drm/i915: Add support of SDVO on Ibexpeak PCH
  drm/i915: Don't enable pipe/plane/VCO early (wait for DPMS on).
  drm/i915: do not read uninitialized ->dev_private
  Revert "drm/i915: Use a dmi quirk to skip a broken SDVO TV output."
  drm/i915: implement multifunction SDVO device support
  drm/i915: remove unused intel_pipe_get_connector()
  drm/i915: remove connector object in old output structure
  ...
2010-04-20 13:11:45 +10:00
Dan Carpenter
42df64b1f8 i2c-stu300: off by one issue
If we don't find the correct rate, we want to end the loop with "i"
pointing to the last element in the array.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-04-20 01:17:13 +01:00
Kevin Wells
28ad3321a1 i2c-pnx: Add stop conditions for end of transfer
Add a stop condition bit flag to the last byte in the transfer.
This will generate an extra clock to handle the stop condition
and prevent devices from staying in an ACK'd state.

Signed-off-by: Kevin Wells <wellsk40@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-04-20 01:16:57 +01:00
Kevin Wells
be80dbaa3e i2c-pnx: Limit maximum divider to 1023
Limit maximum divider to 0x3ff to divider computations. On high I2C
parent clock rates, the divider can exceed 0x3ff. This will help
prevent some very odd clock rates.

Signed-off-by: Kevin Wells <wellsk40@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-04-20 01:16:57 +01:00
Mika Westerberg
7c6bd2010f i2c-omap: fix OOPS in omap_i2c_unidle() during probe
Commit d84d3ea317 added register shift to allow
also 16-bit register access. However, omap_i2c_unidle() is called before these
are set which causes the following OOPS:

    Unhandled fault: alignment exception (0x801) at 0xfa070009
    Internal error: : 801 [#1]
    last sysfs file:
    Modules linked in:
    CPU: 0    Not tainted  (2.6.34-rc2-00052-gae6be51 #3)
    PC is at omap_i2c_unidle+0x44/0x138
    LR is at trace_hardirqs_on_caller+0x158/0x18c
    pc : [<c01cd2c4>]    lr : [<c00743f8>]    psr: 20000013
    sp : cfc2bf10  ip : 00000009  fp : 00000000
    r10: 00000000  r9 : 00000000  r8 : c0378560
    r7 : c0378b88  r6 : c0378558  r5 : cfcadc00  r4 : cfcadc00
    r3 : 00000009  r2 : fa070000  r1 : 00000000  r0 : 00000000
    Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
    Control: 10c5387f  Table: 80004019  DAC: 00000017
    Process swapper (pid: 1, stack limit = 0xcfc2a2e8)
    Stack: (0xcfc2bf10 to 0xcfc2c000)
    bf00:                                     c0372cf8 c027225c 00000000 c0a69678
    bf20: cfc3e508 c0500898 c0378560 c0378560 c0500898 cfcac8c0 c04fc280 c017d4f4
    bf40: c0378560 c017c63c c0378560 c0378594 c0500898 cfcac8c0 c04fc280 c017c754
    bf60: 00000000 c017c6f4 c0500898 c017beac cfc16a5c cfc3fd94 c0023448 c0500898
    bf80: c0500898 c017b7d4 c032dc7f 00000093 cfc28d40 c0023448 00000000 c0500898
    bfa0: 00000000 00000000 00000000 c017ca48 c0023448 00000000 c001d274 00000000
    bfc0: 00000000 c002b344 00000031 00000000 00000000 00000192 00000000 c0023448
    bfe0: 00000000 00000000 00000000 c0008578 00000000 c002c304 ffdfffff ffffffff
    [<c01cd2c4>] (omap_i2c_unidle+0x44/0x138) from [<c027225c>] (omap_i2c_probe+0x1a4/0x398)
    [<c027225c>] (omap_i2c_probe+0x1a4/0x398) from [<c017d4f4>] (platform_drv_probe+0x18/0x1c)
    [<c017d4f4>] (platform_drv_probe+0x18/0x1c) from [<c017c63c>] (driver_probe_device+0xc0/0x178)
    [<c017c63c>] (driver_probe_device+0xc0/0x178) from [<c017c754>] (__driver_attach+0x60/0x84)
    [<c017c754>] (__driver_attach+0x60/0x84) from [<c017beac>] (bus_for_each_dev+0x44/0x74)
    [<c017beac>] (bus_for_each_dev+0x44/0x74) from [<c017b7d4>] (bus_add_driver+0x9c/0x218)
    [<c017b7d4>] (bus_add_driver+0x9c/0x218) from [<c017ca48>] (driver_register+0xa8/0x130)
    [<c017ca48>] (driver_register+0xa8/0x130) from [<c002b344>] (do_one_initcall+0x5c/0x1b8)
    [<c002b344>] (do_one_initcall+0x5c/0x1b8) from [<c0008578>] (kernel_init+0x90/0x144)
    [<c0008578>] (kernel_init+0x90/0x144) from [<c002c304>] (kernel_thread_exit+0x0/0x8)
    Code: e5942004 e3a0c009 e1a0331c e3a01000 (e18210b3)
    ---[ end trace 1b75b31a2719ed1c ]---

This patch moves register shift setting before any register accesses are done.

Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com>
Cc: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-04-20 01:16:57 +01:00
Arnaud Patard
da9c99fc32 i2c-imx: fix error handling
- Return -ETIMEDOUT on bus busy error
- Fix timeout test "time_after(jiffies, orig_jiffies + HZ / 1000)" :
  By default, HZ=100 on arm. This means that this test has no chances to
  work and may result in a dead loop. Set timeout to 500ms.
- Don't try to send a new message if we failed to transmit
  previous one. This was preventing to recover from error on my system

Signed-off-by: Arnaud Patard <apatard@mandriva.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2010-04-20 01:16:57 +01:00