Commit graph

94,495 commits

Author SHA1 Message Date
Dan Carpenter
bcf59e2c4d uwb: remove duplicate cpu_to_le16()
These parameters should be passed as cpu endian because we change it to
little endian inside usb_control_msg().  On x86 cpu_to_le16() doesn't
do anything so either way works but I think the original code would break
on big endian systems.

I removed the masks as well because that usb_control_msg() parameters
are __u16 so we already only use the lower bits.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2010-02-25 13:38:51 +00:00
David Vrabel
03806fa20f Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into for-upstream 2010-02-25 13:35:22 +00:00
Artem Bityutskiy
9a5dea7b10 mtd: maps: ceiva: do not return random numbers
When machine_is_ceiva() returns zero, 'clps_setup_flash()' returns a
value of an unitialized variable. Fix this.

Spotted by David Binderman.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 12:50:45 +00:00
Ben Hutchings
dad0db318b mtdchar: Register the full range of minor numbers
register_chrdev() registers minor numbers up to 255, but we can now
potentially have much larger numbers.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 12:46:04 +00:00
Ben Hutchings
4d3a8534bd mtd: Raise limit on block device minor numbers
add_mtd_blktrans_dev() imposes a maximum of 257 devices per block
translator.  This was presumably meant to prevent overflow back in the
days of 8-bit minor numbers.  Instead, check against MINORMASK and the
limits of the partition naming scheme.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 12:40:19 +00:00
Ben Hutchings
b520e412fa mtd: Replace static array of devices with an idr structure
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:55:14 +00:00
Ben Hutchings
cbfe93e9ce mtd: mtdblock: Dynamically allocate cache info structures
Since we allocate struct mtd_blktrans_dev for each block device, we
can add our own structure members to the end.  Therefore embed
struct mtd_blktrans_dev in struct mtdblk_dev and remove the static
array of struct mtdblk_dev.  Also remove the redundant pointer to
struct mtd_info.

This is preparation for removing the static limit on the number of MTD
devices.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:53:00 +00:00
Ben Hutchings
24c1549677 mtd: Remove unnecessary comparisons with MAX_MTD_DEVICES
MAX_MTD_DEVICES is about to be removed.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:39:09 +00:00
Ben Hutchings
e99e90aef1 mtd: nandsim: Define CONFIG_NANDSIM_MAX_PARTS and use it instead of MAX_MTD_DEVICES
MAX_MTD_DEVICES is about to be removed.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:39:03 +00:00
Ben Hutchings
677c2aec8c mtd: Use get_mtd_device_nm() to find named device in get_sb_mtd()
This removes the need to know the number of MTD devices.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:38:35 +00:00
Ben Hutchings
f1332ba2f2 mtd: Introduce and use iteration macro for reading the MTD device table
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:37:16 +00:00
Roel Kluin
0040476b0e mtd: change positive error return into negative
Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:35:28 +00:00
Mike Frysinger
4335c1003e mtd: maps: Blackfin async: rename local funcs to avoid common clashes
There are new Blackfin MMR helper functions that use the same name as some
of the local functions in this driver, so have the driver use more specific
names to avoid the issue.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:35:14 +00:00
H Hartley Sweeten
bcc98a46ea mtd: fix different address space noise
In mtd_ioctl MEMGETREGIONINFO the region_user_info pointer ur
is cast in __kernel space. This produces a number of sparse warnings
like:

warning: cast removes address space of expression
warning: incorrect type in initializer (different address spaces)
   expected unsigned int const [noderef] <asn:1>*register __p
   got unsigned int *<noident>

Since argp is already a void __user * just use it dirrectly without
the cast and make ur a __user *.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:29:48 +00:00
Jon Ringle
53f2b1c86a mtd: ixp4xx: fix reading from half-word boundary
Fix handling of reads that don't start on a half-word boundary.

Signed-off-by: Jon Ringle <jon@ringle.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:28:56 +00:00
Uwe Kleine-König
9c14b153e6 mtd: mxc-nand: don't disable clock in mxcnd-suspend
The clock must already be off after mtd->suspend.  Disabling it again
results in an negative overflow of the clock usage count.  This didn't
hurt as mxcnd_resume undid it after wake up.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:28:35 +00:00
Uwe Kleine-König
b840bc11b5 mtd: mxc-nand: no need to check for validity of platform driver data
The probe function calls platform_set_drvdata with a valid pointer when
the probe is successful.  As mxcnd_suspend and mxcnd_resume are only
called on bound devices, platform_get_drvdata always returns non-NULL.

This fix isn't critical as the pointer is always valid so it doesn't
matter if the compiler generated code for it or not.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reported-by: David Binderman <dcb314@hotmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:28:06 +00:00
Jiri Slaby
17fabf1565 mtd: cfi: remove unneeded NULL checks
In cfi_intelext_setup and cfi_amdstd_setup, mtd is never NULL.
Remove unnecessary checks.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:27:38 +00:00
Márton Németh
b2d4fbab79 mtd: nand: make Open Firmware device id constant
The match_table field of the struct of_device_id is constant in <linux/of_platform.h>
so it is worth to make xps2_of_match also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
	struct I1 {
	  ...
	  const struct I2 *x;
	  ...
	};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
	struct I1 y = {
	  .x = E,
	};
@c@
identifier r.I2;
identifier s.E;
@@
	const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+	const
	struct I2 E[] = ...;
// </smpl>

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:26:36 +00:00
Márton Németh
b3acd638a2 mtd: nand: make USB device id constant
The id_table field of the struct usb_device_id is constant in <linux/usb.h>
so it is worth to make alauda_table also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
	struct I1 {
	  ...
	  const struct I2 *x;
	  ...
	};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
	struct I1 y = {
	  .x = E,
	};
@c@
identifier r.I2;
identifier s.E;
@@
	const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+	const
	struct I2 E[] = ...;
// </smpl>

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:26:31 +00:00
Márton Németh
377ace08ea mtd: nand: make PCI device id constant
The id_table field of the struct pci_driver is constant in <linux/pci.h>
so it is worth to make cafe_nand_tbl also constant.

The semantic match that finds this kind of pattern is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r@
disable decl_init,const_decl_init;
identifier I1, I2, x;
@@
	struct I1 {
	  ...
	  const struct I2 *x;
	  ...
	};
@s@
identifier r.I1, y;
identifier r.x, E;
@@
	struct I1 y = {
	  .x = E,
	};
@c@
identifier r.I2;
identifier s.E;
@@
	const struct I2 E[] = ... ;
@depends on !c@
identifier r.I2;
identifier s.E;
@@
+	const
	struct I2 E[] = ...;
// </smpl>

Signed-off-by: Márton Németh <nm127@freemail.hu>
Cc: Julia Lawall <julia@diku.dk>
Cc: cocci@diku.dk
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:26:26 +00:00
Andrey Yurovsky
6029a3a462 mtd: nandsim: fix spelling
s/nanodeconds/nanoseconds

Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-02-25 11:26:11 +00:00
Grazvydas Ignotas
91143379b0 Input: ads7846 - add regulator support
The ADS7846/TSC2046 touchscreen controllers can (and usually are)
connected to various regulators for power, so add regulator support.

Valid regulator will now be required, so boards without complete
regulator setup should either disable regulator framework or enable
CONFIG_REGULATOR_DUMMY.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-02-25 02:07:07 -08:00
Jens Axboe
7f03292ee1 Merge branch 'master' into for-2.6.34
Conflicts:
	include/linux/blkdev.h

Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2010-02-25 08:48:05 +01:00
Paul Mundt
da64c2a8de clocksource: Fix up a registration/IRQ race in the sh drivers.
All of the SH clocksource drivers follow the scheme that the IRQ is setup
prior to registering the clockevent. The interrupt handler in the
clockevent cases looks to the event handler function pointer being filled
in by the registration code, permitting us to get in to situations where
asserted IRQs step in to the handler before registration has had a chance
to complete and hitting a NULL pointer deref.

In practice this is not an issue for most platforms, but some of them
with fairly special loaders (or that are chain-loading from another
kernel) may enter in to this situation. This fixes up the oops reported
by Rafael on hp6xx.

Reported-and-tested-by: Rafael Ignacio Zurita <rafaelignacio.zurita@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-02-25 16:37:46 +09:00
Matt Turner
3bfc7d22d0 drm/nouveau: use ALIGN instead of open coding it
CC: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:46 +10:00
Ben Skeggs
b30083bdb9 drm/nouveau: report unknown connector state if lid closed
This is in preference to disconnected.  If there's no other outputs
connected this will cause LVDS to be programmed even with the lid
closed rather than having X fail to start because of no available
outputs.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:44 +10:00
Ben Skeggs
c52e53fd38 drm/nouveau: support version 0x20 displayport tables
Not entirely identical to 0x21, the per-encoder table header lacks the
third init table pointer.  However, our current parsing of the table
should work just fine.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:42 +10:00
Marcin Kościelnicki
81e2d42200 drm/nouveau: Fix noaccel/nofbaccel option descriptions.
Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:40 +10:00
Marcin Kościelnicki
d5f3c90d4f drm/nv50: Implement ctxprog/state generation.
This removes dependence on external firmware for NV50 generation cards.
If the generated ctxprogs don't work for you for some reason, please
report it.

Signed-off-by: Marcin Kościelnicki <koriakin@0x04.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:38 +10:00
Ben Skeggs
be079e97b5 drm/nouveau: use dcb connector types throughout the driver
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:36 +10:00
Ben Skeggs
1157563931 drm/nv50: enable hpd on any connector we know the gpio line for
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:34 +10:00
Ben Skeggs
7f612d87f8 drm/nouveau: use dcb connector table for creating drm connectors
This makes this code common to both the nv04 and nv50 paths.

For the moment, we keep the previous behaviour with HDMI/eDP connectors
and report them as DVI-D/DP instead.  This will be fixed once the rest
of the code has been fixed to deal with those types.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:32 +10:00
Ben Skeggs
dc5bc4ed38 drm/nouveau: construct a connector table for cards that lack a real one
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:30 +10:00
Ben Skeggs
f66fa771d5 drm/nouveau: check for known dcb connector types
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:28 +10:00
Ben Skeggs
54abb5ddae drm/nouveau: parse dcb gpio/connector tables after encoders
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:26 +10:00
Ben Skeggs
e7cc51c565 drm/nouveau: reorganise bios header, add dcb connector type enums
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:23 +10:00
Ben Skeggs
04a39c577f drm/nouveau: merge nvbios and nouveau_bios_info
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:21 +10:00
Ben Skeggs
7f245b20e3 drm/nouveau: merge parsed_dcb and bios_parsed_dcb into dcb_table
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:19 +10:00
Ben Skeggs
a6678b2ace drm/nouveau: rename parsed_dcb_gpio to dcb_gpio_table
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:17 +10:00
Ben Skeggs
b42861f40f drm/nouveau: allow retrieval of vbios image from debugfs
It's very useful to be able to access this without additional tools for
debugging purposes.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:15 +10:00
Luca Barbieri
e32b2c883b drm/nouveau: fix missing spin_unlock in failure path
Found by sparse.

Signed-off-by: Luca Barbieri <luca@luca-barbieri.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:13 +10:00
Marcin Slusarz
761c5a6975 drm/nouveau: fix i2ctable bounds checking
i2c_entries seems to be the number of i2c entries,
so with index equal to this number, we could read
invalid data from i2ctable. Fix it.

Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:11 +10:00
Marcin Slusarz
b762b8ce53 drm/nouveau: fix nouveau_i2c_find bounds checking
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:09 +10:00
Marcin Slusarz
df31ef4dbd drm/nouveau: fix pramdac_table range checking
get_tmds_index_reg reads some value from stack when mlv happens
to be equal to size of pramdac_table array. Fix it.

Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:09:07 +10:00
Ben Skeggs
a1606a9596 drm/nouveau: new gem pushbuf interface, bump to 0.0.16
This commit breaks the userspace interface, and requires a new libdrm for
nouveau to operate again.

The multiple GEM_PUSHBUF ioctls that were present in 0.0.15 for
compatibility purposes are now gone, and replaced with the new ioctl which
allows for multiple push buffers to be submitted (necessary for hw index
buffers in the nv50 3d driver) and relocations to be applied on any buffer.

A number of other ioctls (CARD_INIT, GEM_PIN, GEM_UNPIN) that were needed
for userspace modesetting have also been removed.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Francisco Jerez <currojerez@riseup.net>
2010-02-25 15:08:44 +10:00
Ben Skeggs
d87897d4c8 drm/nv50: make pushbuf dma object cover entire vm
This allows us to submit push buffers from any memtype to the hardware.
We'll need this ability for VRAM index buffers at some point.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:08:33 +10:00
Ben Skeggs
2ccb04ecc7 drm/nouveau: remove PUSHBUF_CAL macro
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:08:31 +10:00
Ben Skeggs
9a391ad8a2 drm/nv50: switch to indirect push buffer controls
PFIFO on G80 and up has a new mode where the main ring buffer is simply a
ring of pointers to indirect buffers containing the actual command/data
packets.  In order to be able to implement index buffers in the 3D driver
we need to be able to submit data-only push buffers right after the cmd
packet header, which is only possible using the new command submission
method.

This commit doesn't make it possible to implement index buffers yet, some
userspace interface changes will be required, but it does allow for
testing/debugging of the hardware-side support in the meantime.

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:08:29 +10:00
Maarten Maathuis
ff9e5279b1 drm/nouveau: protect channel create/destroy and irq handler with a spinlock
The nv50 pgraph handler (for example) could reenable pgraph fifo access
and that would be bad when pgraph context is being unloaded (we need the
guarantee a ctxprog isn't running).

Signed-off-by: Maarten Maathuis <madman2003@gmail.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-02-25 15:07:53 +10:00