Commit graph

94,495 commits

Author SHA1 Message Date
Ron Mercer
a2f9823284 qlge: Add xgmac reg blocks to firwmare dump.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-16 01:01:55 -08:00
Ron Mercer
a48c86fdb1 qlge: Add serdes reg blocks dump to firmware dump.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-16 01:01:54 -08:00
Ron Mercer
24bb55b480 qlge: Add alternate function's reg dump to fw dump.
Get the 2nd (other) nic function register values.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-16 01:01:53 -08:00
Ron Mercer
2c1f73c3dd qlge: Add RAM dump to firmware dump.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-16 01:01:53 -08:00
Ron Mercer
c89ec8b9de qlge: Add probe regs to firmware dump.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-16 01:01:52 -08:00
Ron Mercer
8aae260003 qlge: Add basic firmware dump.
Adding the infrstructure and basic data for the firmware
core dump.
The firmware coredump is turned OFF by default.  There will be no
memory allocations for data dumps to the log.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-16 01:01:52 -08:00
Ron Mercer
b87babeb40 qlge: Add data for firmware dump.
Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-01-16 01:01:51 -08:00
Luck, Tony
7a0b73a49a ACPI: Fix section mismatch error for acpi_early_processor_set_pdc()
Alex Chiang introduced acpi_early_processor_set_pdc() in commit:
 ACPI: processor: call _PDC early
 78f1699659

But this results in a section mismatch:

WARNING: drivers/acpi/acpi.o(.text+0xa9c1): Section mismatch in reference from the
function acpi_early_processor_set_pdc() to the variable .cpuinit.data:processor_idle_dmi_table
The function acpi_early_processor_set_pdc() references
the variable __cpuinitdata processor_idle_dmi_table.
This is often because acpi_early_processor_set_pdc lacks a __cpuinitdata
annotation or the annotation of processor_idle_dmi_table is wrong.

The only caller of acpi_early_processor_set_pdc() is acpi_bus_init() which
is an "__init" function. So the correct fix here is to mark
acpi_early_processor_set_pdc() "__init" too.

Signed-off-by: Tony Luck <tony.luck@intel.com>
Acked-by: Alex Chiang <achiang@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-16 02:00:44 -05:00
Corentin Chary
4194e2f551 eeepc-laptop: disable wireless hotplug for 1201N
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-16 01:50:05 -05:00
Corentin Chary
322a1356be eeepc-laptop: add hotplug_disable parameter
Some new models need to disable wireless hotplug.
For the moment, we don't know excactly what models need that,
except 1005HA.
Users will be able to use that param as a workaround.

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-16 01:49:50 -05:00
Dmitry Torokhov
642e0447cb eeepc-laptop: switch to using sparse keymap library
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Tested-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Acked-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-16 01:49:41 -05:00
Corentin Chary
10ae4b5663 eeepc-laptop: dmi blacklist to disable pci hotplug code
This is a short term workaround for Eeepc 1005HA.

refs: <http://bugzilla.kernel.org/show_bug.cgi?id=14570>

Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-16 01:49:28 -05:00
Alan Jenkins
da8ba01deb eeepc-laptop: disable cpu speed control on EeePC 701
The EeePC 4G ("701") implements CFVS, but it is not supported by the
pre-installed OS, and the original option to change it in the BIOS
setup screen was removed in later versions.  Judging by the lack of
"Super Hybrid Engine" on Asus product pages, this applies to all "701"
models (4G/4G Surf/2G Surf).

So Asus made a deliberate decision not to support it on this model.
We have several reports that using it can cause the system to hang [1].
That said, it does not happen all the time.  Some users do not
experience it at all (and apparently wish to continue "right-clocking").

Check for the EeePC 701 using DMI.  If met, then disable writes to the
"cpufv" sysfs attribute and log an explanatory message.

Add a "cpufv_disabled" attribute which allow users to override this
policy.  Writing to this attribute will log a second message.

The sysfs attribute is more useful than a module option, because it
makes it easier for userspace scripts to provide consistent behaviour
(according to user configuration), regardless of whether the kernel
includes this change.

[1] <http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=559578>

Signed-off-by: Alan Jenkins <alan-jenkins@tuffmail.co.uk>
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-16 01:49:13 -05:00
H Hartley Sweeten
070a24f4d2 ACPI: Remove unnecessary cast.
The struct seq_file 'private' member is a void *, the cast is not needed.
Also, remove an extra whitespace line.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-15 23:06:44 -05:00
Zhao Yakui
6a4e2b7503 ACPI: Advertise to BIOS in _OSC: _OST on _PPC changes
If the BIOS pokes the system-wide OSC bits to see if Linux
supports evaluating _OST after a _PPC change notification,
answer yes.

Also, fix an oversight where we neglected to set the OSC
bit advertising processor aggregator device support
when acpi-pad is compiled as a module.

Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-15 23:05:00 -05:00
Alexey Starikovskiy
54070101f8 ACPI: EC: Add wait for irq storm
Merge of poll and irq modes accelerated EC transaction, so
that keyboard starts to suffer again. Add msleep(1) into
transaction path for the storm to allow keyboard controller
to do its job.

Reference: http://bugzilla.kernel.org/show_bug.cgi?id=14747

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-15 22:53:04 -05:00
Alexey Starikovskiy
f5347867c5 ACPI: SBS: Move SBS HC callback to faster Notify queue
SBS transactions should happen in Notify work queue, to not create
a dead lock with GPE execution accessing SBS devices.

Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
2010-01-15 22:52:48 -05:00
Linus Torvalds
bf0c346b3f Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  amd64_edac: Ensure index stays within bounds in amd64_get_scrub_rate
2010-01-15 14:52:44 -08:00
Linus Torvalds
3b3ef30833 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: sentelic - fix left/right horizontal scroll mapping
  Input: pmouse - move Sentelic probe down the list
  Input: add compat support for sysfs and /proc capabilities output
  Input: i8042 - add Dritek quirk for Acer Aspire 5610.
  Input: xbox - do not use GFP_KERNEL under spinlock
  Input: psmouse - fix Synaptics detection when protocol is disabled
  Input: bcm5974 - report ABS_MT events
  Input: davinci_keyscan - add device_enable method to platform data
  Input: evdev - be less aggressive about sending SIGIO notifies
  Input: atkbd - fix canceling event_work in disconnect
  Input: serio - fix potential deadlock when unbinding drivers
  Input: gf2k - fix &&/|| confusion in gf2k_connect()
2010-01-15 14:51:57 -08:00
Zhenyu Wang
9b974cc171 drm/i915: enable 36bit physical address for hardware status page
This enables possible 36bit address mask on 965G that use physical
address for hw status page.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 14:50:14 -08:00
Zhenyu Wang
6251ec0ae2 drm/i915: fix eDP pipe mask
eDP could be on pipe A or B.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 14:13:18 -08:00
Zhenyu Wang
885a5fb5b1 drm/i915: fix pixel color depth setting on eDP
Original DP mode_valid check didn't take pixel color depth into account,
which made one 1600x900 eDP panel's mode check invalid because of overclock,
but actually this 6bpc panel does can work with x1 lane at 2.7G. This one
trys to take bpp value properly both in mode validation and mode setting.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 14:13:06 -08:00
Zhenyu Wang
500a8cc466 drm/i915: parse eDP panel color depth from VBT block
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 14:12:47 -08:00
Jesse Barnes
33814341f2 drm/i915: disable LVDS downclock by default
Many platform support this feature, and it can provide significant
power savings when the reduced refresh rate is low.  However, on some
platforms a secondary (reduced) timing is provided but not actually
supported by the hardware.  This results in undesirable flicker at
runtime.

So disable the feature by default, but allow users to opt-in to the
reduced clock behavior with a new module parameter, lvds_downclock,
that can be set to 1 to enable the feature.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 14:08:01 -08:00
Zhao Yakui
21bd770b9c drm/i915: Fix the incorrect cursor A bit definition in DSPFW2 register
Signed-off-by: Zhao Yakui <yakui.zhao@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Eric Anholt <eric@anholt.net>
2010-01-15 14:06:19 -08:00
Rafał Miłecki
730dd70549 b43: N-PHY: drop unused definition, uncomment needed call
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:44 -05:00
Rafał Miłecki
6dcd9d911c b43: N-PHY: implement TX power control coef setup
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:43 -05:00
Rafał Miłecki
15931e318b b43: N-PHY: add RX IQ calibrationi for rev < 3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:43 -05:00
Rafał Miłecki
fb43b8e235 b43: N-PHY: add huge calculating TX IQ LO
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:42 -05:00
Rafał Miłecki
e9762492f5 b43: N-PHY: implement calculating IQ gain params
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:42 -05:00
Rafał Miłecki
de7ed0c624 b43: N-PHY: update TX calibration ladder
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:42 -05:00
Rafał Miłecki
c4a92003b0 b43: N-PHY: add RX radio cores calibration
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:41 -05:00
Rafał Miłecki
fe3e46e881 b43: N-PHY: add TX LP FBW (TX filter 40 related)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:40 -05:00
Rafał Miłecki
b0022e15cc b43: N-PHY: implement getting TX gains
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:40 -05:00
Rafał Miłecki
34a56f2cae b43: N-PHY: implement calculating RX IQ comp
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:40 -05:00
Rafał Miłecki
2faa6b832f b43: N-PHY: implement RX IQ estimation
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:39 -05:00
Rafał Miłecki
2f258b74d1 b43: N-PHY: implement restoring general configuration
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>a
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:39 -05:00
Rafał Miłecki
0914640072 b43: N-PHY: implement workaround for TX IQ
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:38 -05:00
Rafał Miłecki
a67162ab00 b43: N-PHY: implement RX IQ coeffs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:38 -05:00
Rafał Miłecki
5c1a140afb b43: N-PHY: add function than forces (not) staying in carrier search
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:37 -05:00
Rafał Miłecki
42e1547e51 b43: N-PHY: add RSSI calibration restore
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>`
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:37 -05:00
Rafał Miłecki
e50cbcf674 b43: N-PHY: implement PA overriding (RF control related)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:36 -05:00
Rafał Miłecki
90b9738d85 b43: N-PHY: RSSI calibration for rev < 3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:36 -05:00
Rafał Miłecki
dfb4aa5dd0 b43: N-PHY: add RSSI polling and setting 2055 (radio) VCM
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:35 -05:00
Rafał Miłecki
3c95627d40 b43: N-PHY: implement RSSI selection and offset scaling
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:35 -05:00
Rafał Miłecki
bbec398c1b b43: N-PHY: add clip detection reading/writing and some classifier function
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:34 -05:00
Rafał Miłecki
4cb9977516 b43: N-PHY: split RSSI calibration into 2 functions (rev2, rev3)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:34 -05:00
Rafał Miłecki
4a933c8566 b43: N-PHY: update CCA reset
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:33 -05:00
Rafał Miłecki
0988a7a1a9 b43: N-PHY: update init code to match current specs
Previous init path was based on old specs from old driver. Update it
as much as possible leaving some TODOs for not implemented functions.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:33 -05:00
Rafał Miłecki
088e56b44a b43: N-PHY: add various tables
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15 17:05:32 -05:00